You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@jmeter.apache.org by sebb <se...@gmail.com> on 2008/12/17 00:41:52 UTC
Re: Target host on Vmware
On 16/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
> Hi - My target host is running on vmware so i have a hostname like
> "tj-web-8.service.com:8000".
That is not a hostname (nor a URL).
> When i specify the hostname as a property on
> the command line such as
> -Jhostname=tj-web-8.service.com:8000 and start my jmeter
That just defines the JMeter property "hostname".
> GUI, my jmeter script throws hostname errors and i see the hostname in the
> "View results Tree" listener for the samplers as
> "http:\\[tj-web-8.service.com:8000]\...", Can somebody
> please tell me why the hostname has been put between the brackets "[]"
> causing the errors.
JMeter does not add those characters, so there must be an error in the
test plan.
> I have already tried supplying port and hostname
> separately but that did not work for me either.
Exactly how did you provide the port?
And how are you using the hostname and port properties in the sampler?
>
> Thanks,
> TJ
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail:
> jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail:
> jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Target host on Vmware
Posted by Quasar <qu...@libero.it>.
sebb wrote:
>
> Or you could delete the "Host" headers from the Header Managers - the
> header will be generated from the sampler parameters.
>
> Perhaps the JMeter Proxy should discard "Host" headers...
>
>
I agree completely. That would be a suggestion I'd subscribe :)
Quasar
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Target host on Vmware
Posted by sebb <se...@gmail.com>.
On 19/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
> I am using Jmeter 2.3.2.
>
> Using Port 80 cannot help resolve this problem. My app is running on vmware
> where i have to specify a particular port which a particular jvm is using
> (8000 in my case).
I just meant that it might be worth checking how the script behaves
when you replace say jakarta.apache.org with jakarta.apache.org:80.
> However, i have fixed the problem by replacing the value of Host parameters
> from "${__property(hostname)}" to
> "${__property(hostname)}:${__property(httpPort)}" for all
> the browser derived headers under every sampler.
>
Or you could delete the "Host" headers from the Header Managers - the
header will be generated from the sampler parameters.
Perhaps the JMeter Proxy should discard "Host" headers...
>
> Thanks,
> TJ
>
> sebb wrote:
>
> > On 17/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
> >
> >
> > > I provided the Port as -JhttpPort=8000 and hostname as
> > > -Jhostname=tj-web-8.service.com while starting up the
> > > Jmeter GUI from the command line.
> > >
> > >
> >
> > OK
> >
> >
> >
> > > I am using the hostname and port properties in my sampler as: Server
> Name
> > > or IP: ${__property(hostname)} , Port Number: ${__property(httpPort)}
> > >
> > >
> >
> > OK.
> >
> >
> >
> > > I have used the same test plan with the target host running without a
> > > vmware and the test plan works just fine with a hostname such as
> > > tj-web-8.service.com so i am not sure where these "[]" characters are
> coming
> > > from.
> > >
> > >
> >
> > Try using port 80 with a normal host.
> >
> > Which version of JMeter?
> >
> > Any error messages in the log file?
> >
> >
> >
> > > Thanks,
> > > TJ
> > >
> > >
> > > sebb wrote:
> > >
> > >
> > >
> > > > On 16/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
> > > >
> > > >
> > > >
> > > >
> > > > > Hi - My target host is running on vmware so i have a hostname like
> > > > > "tj-web-8.service.com:8000".
> > > > >
> > > > >
> > > > >
> > > > >
> > > > That is not a hostname (nor a URL).
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > When i specify the hostname as a property on
> > > > > the command line such as
> > > > > -Jhostname=tj-web-8.service.com:8000 and start my
> > > > >
> > > > >
> > > >
> > > jmeter
> > >
> > >
> > > >
> > > > >
> > > > >
> > > > That just defines the JMeter property "hostname".
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > GUI, my jmeter script throws hostname errors and i see the hostname
> in
> > > > >
> > > > >
> > > >
> > > the
> > >
> > >
> > > >
> > > > > "View results Tree" listener for the samplers as
> > > > > "http:\\[tj-web-8.service.com:8000]\...", Can
> somebody
> > > > > please tell me why the hostname has been put between the brackets
> "[]"
> > > > > causing the errors.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > JMeter does not add those characters, so there must be an error in the
> > > > test plan.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > I have already tried supplying port and hostname
> > > > > separately but that did not work for me either.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > Exactly how did you provide the port?
> > > >
> > > > And how are you using the hostname and port properties in the sampler?
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Thanks,
> > > > > TJ
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> ---------------------------------------------------------------------
> > >
> > >
> > > >
> > > > > To unsubscribe, e-mail:
> > > > > jmeter-user-unsubscribe@jakarta.apache.org
> > > > > For additional commands, e-mail:
> > > > > jmeter-user-help@jakarta.apache.org
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> ---------------------------------------------------------------------
> > >
> > >
> > > > To unsubscribe, e-mail:
> > > >
> > > >
> > > jmeter-user-unsubscribe@jakarta.apache.org
> > >
> > >
> > > > For additional commands, e-mail:
> > > >
> > > >
> > > jmeter-user-help@jakarta.apache.org
> > >
> > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail:
> > > jmeter-user-unsubscribe@jakarta.apache.org
> > > For additional commands, e-mail:
> > > jmeter-user-help@jakarta.apache.org
> > >
> > >
> > >
> > >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail:
> jmeter-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail:
> jmeter-user-help@jakarta.apache.org
> >
> >
> >
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail:
> jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail:
> jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Target host on Vmware
Posted by "Temoor A. Janjua" <tj...@unicon.net>.
I am using Jmeter 2.3.2.
Using Port 80 cannot help resolve this problem. My app is running on
vmware where i have to specify a particular port which a particular jvm
is using (8000 in my case).
However, i have fixed the problem by replacing the value of Host
parameters from "${__property(hostname)}" to
"${__property(hostname)}:${__property(httpPort)}" for all the browser
derived headers under every sampler.
Thanks,
TJ
sebb wrote:
> On 17/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
>
>> I provided the Port as -JhttpPort=8000 and hostname as
>> -Jhostname=tj-web-8.service.com while starting up the
>> Jmeter GUI from the command line.
>>
>
> OK
>
>
>> I am using the hostname and port properties in my sampler as: Server Name
>> or IP: ${__property(hostname)} , Port Number: ${__property(httpPort)}
>>
>
> OK.
>
>
>> I have used the same test plan with the target host running without a
>> vmware and the test plan works just fine with a hostname such as
>> tj-web-8.service.com so i am not sure where these "[]" characters are coming
>> from.
>>
>
> Try using port 80 with a normal host.
>
> Which version of JMeter?
>
> Any error messages in the log file?
>
>
>> Thanks,
>> TJ
>>
>>
>> sebb wrote:
>>
>>
>>> On 16/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
>>>
>>>
>>>
>>>> Hi - My target host is running on vmware so i have a hostname like
>>>> "tj-web-8.service.com:8000".
>>>>
>>>>
>>>>
>>> That is not a hostname (nor a URL).
>>>
>>>
>>>
>>>
>>>> When i specify the hostname as a property on
>>>> the command line such as
>>>> -Jhostname=tj-web-8.service.com:8000 and start my
>>>>
>> jmeter
>>
>>>>
>>> That just defines the JMeter property "hostname".
>>>
>>>
>>>
>>>
>>>> GUI, my jmeter script throws hostname errors and i see the hostname in
>>>>
>> the
>>
>>>> "View results Tree" listener for the samplers as
>>>> "http:\\[tj-web-8.service.com:8000]\...", Can somebody
>>>> please tell me why the hostname has been put between the brackets "[]"
>>>> causing the errors.
>>>>
>>>>
>>>>
>>> JMeter does not add those characters, so there must be an error in the
>>> test plan.
>>>
>>>
>>>
>>>
>>>> I have already tried supplying port and hostname
>>>> separately but that did not work for me either.
>>>>
>>>>
>>>>
>>> Exactly how did you provide the port?
>>>
>>> And how are you using the hostname and port properties in the sampler?
>>>
>>>
>>>
>>>
>>>> Thanks,
>>>> TJ
>>>>
>>>>
>>>>
>> ---------------------------------------------------------------------
>>
>>>> To unsubscribe, e-mail:
>>>> jmeter-user-unsubscribe@jakarta.apache.org
>>>> For additional commands, e-mail:
>>>> jmeter-user-help@jakarta.apache.org
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>> ---------------------------------------------------------------------
>>
>>> To unsubscribe, e-mail:
>>>
>> jmeter-user-unsubscribe@jakarta.apache.org
>>
>>> For additional commands, e-mail:
>>>
>> jmeter-user-help@jakarta.apache.org
>>
>>>
>>>
>>>
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail:
>> jmeter-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail:
>> jmeter-user-help@jakarta.apache.org
>>
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Target host on Vmware
Posted by sebb <se...@gmail.com>.
On 17/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
> I provided the Port as -JhttpPort=8000 and hostname as
> -Jhostname=tj-web-8.service.com while starting up the
> Jmeter GUI from the command line.
OK
> I am using the hostname and port properties in my sampler as: Server Name
> or IP: ${__property(hostname)} , Port Number: ${__property(httpPort)}
OK.
>
> I have used the same test plan with the target host running without a
> vmware and the test plan works just fine with a hostname such as
> tj-web-8.service.com so i am not sure where these "[]" characters are coming
> from.
Try using port 80 with a normal host.
Which version of JMeter?
Any error messages in the log file?
> Thanks,
> TJ
>
>
> sebb wrote:
>
> > On 16/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
> >
> >
> > > Hi - My target host is running on vmware so i have a hostname like
> > > "tj-web-8.service.com:8000".
> > >
> > >
> >
> > That is not a hostname (nor a URL).
> >
> >
> >
> > > When i specify the hostname as a property on
> > > the command line such as
> > > -Jhostname=tj-web-8.service.com:8000 and start my
> jmeter
> > >
> > >
> >
> > That just defines the JMeter property "hostname".
> >
> >
> >
> > > GUI, my jmeter script throws hostname errors and i see the hostname in
> the
> > > "View results Tree" listener for the samplers as
> > > "http:\\[tj-web-8.service.com:8000]\...", Can somebody
> > > please tell me why the hostname has been put between the brackets "[]"
> > > causing the errors.
> > >
> > >
> >
> > JMeter does not add those characters, so there must be an error in the
> > test plan.
> >
> >
> >
> > > I have already tried supplying port and hostname
> > > separately but that did not work for me either.
> > >
> > >
> >
> > Exactly how did you provide the port?
> >
> > And how are you using the hostname and port properties in the sampler?
> >
> >
> >
> > > Thanks,
> > > TJ
> > >
> > >
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail:
> > > jmeter-user-unsubscribe@jakarta.apache.org
> > > For additional commands, e-mail:
> > > jmeter-user-help@jakarta.apache.org
> > >
> > >
> > >
> > >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail:
> jmeter-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail:
> jmeter-user-help@jakarta.apache.org
> >
> >
> >
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail:
> jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail:
> jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Target host on Vmware
Posted by "Temoor A. Janjua" <tj...@unicon.net>.
I provided the Port as -JhttpPort=8000 and hostname as
-Jhostname=tj-web-8.service.com while starting up the Jmeter GUI from
the command line.
I am using the hostname and port properties in my sampler as: Server
Name or IP: ${__property(hostname)} , Port Number: ${__property(httpPort)}
I have used the same test plan with the target host running without a
vmware and the test plan works just fine with a hostname such as
tj-web-8.service.com so i am not sure where these "[]" characters are
coming from.
Thanks,
TJ
sebb wrote:
> On 16/12/2008, Temoor A. Janjua <tj...@unicon.net> wrote:
>
>> Hi - My target host is running on vmware so i have a hostname like
>> "tj-web-8.service.com:8000".
>>
>
> That is not a hostname (nor a URL).
>
>
>> When i specify the hostname as a property on
>> the command line such as
>> -Jhostname=tj-web-8.service.com:8000 and start my jmeter
>>
>
> That just defines the JMeter property "hostname".
>
>
>> GUI, my jmeter script throws hostname errors and i see the hostname in the
>> "View results Tree" listener for the samplers as
>> "http:\\[tj-web-8.service.com:8000]\...", Can somebody
>> please tell me why the hostname has been put between the brackets "[]"
>> causing the errors.
>>
>
> JMeter does not add those characters, so there must be an error in the
> test plan.
>
>
>> I have already tried supplying port and hostname
>> separately but that did not work for me either.
>>
>
> Exactly how did you provide the port?
>
> And how are you using the hostname and port properties in the sampler?
>
>
>> Thanks,
>> TJ
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail:
>> jmeter-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail:
>> jmeter-user-help@jakarta.apache.org
>>
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org