You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by Daniel Baker <in...@collisiondetection.biz> on 2020/01/09 07:35:58 UTC
Not seeing jitter result in network test
When I do the test at
https://mywebsite:5443/openmeetings/hash?swf=network
<https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
Version : 5.0.0-M3-SNAPSHOT
Revision : 1a87265
Build : 2019-11-28T08:48:49Z
I can not see the result in the jitter section :
problem with OM iso
Posted by Maxim Solodovnik <so...@gmail.com>.
Hello Sansao,
please create new thread for new question/topic
I guess the image was attached to your question?
It was lost, could you put it to some image sharing service and send the
link?
@Alvaro maybe you can help? :))
On Fri, 10 Jan 2020 at 14:27, Sansao Machiana <sa...@funae.co.mz>
wrote:
>
> hi.
>
>
> im trying to install openmeeting live iso on my computer ( vmware) and
always a got this error can someone help me?
>
>
> portugues: estou a tentar instalar o openmeeting usando o iso e estou a
ter o seguinte erro em anexo algum pode me ajudar?
>
>
>
>
>
>
>
>
> please
>
>
>
>
>
> Sansão Machiana
>
> FUNAE - Fundo de Energia
>
> Unidade de Tecnologias de Informação e Comunicação
>
> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>
> Tel. +258 21 304717/+258 21 304720
>
> E-mail: sansaomachiana@funae.co.mz
>
> Maputo - Moçambique
>
>
> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>
>
Re: Not seeing jitter result in network test
Posted by Daniel Baker <in...@collisiondetection.biz>.
Thanks will test
On 1/14/2020 3:23 PM, Maxim Solodovnik wrote:
> Demo is updated
> I believe it should look better now
>
> On Fri, 10 Jan 2020 at 14:27, Sansao Machiana
> <sansaomachiana@funae.co.mz <ma...@funae.co.mz>> wrote:
>
> hi.
>
>
> im trying to install openmeeting live iso on my computer ( vmware)
> and always a got this error can someone help me?
>
>
> portugues: estou a tentar instalar o openmeeting usando o iso e
> estou a ter o seguinte erro em anexo algum pode me ajudar?
>
>
>
>
>
>
> please
>
>
>
> Sansão Machiana
>
> *FUNAE - Fundo de Energia*
>
> *Unidade de Tecnologias de Informação e Comunicação*
>
> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>
> Tel. +258 21 304717/+258 21 304720
>
> E-mail: sansaomachiana@funae.co.mz
> <ma...@funae.co.mz>
>
> Maputo - Moçambique
>
>
> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>
> ------------------------------------------------------------------------
> *De:* Денис Кандров <dendrov.kan@gmail.com
> <ma...@gmail.com>>
> *Enviado:* 10 de janeiro de 2020 08:59:05
> *Para:* Maxim Solodovnik
> *Cc:* Openmeetings user-list
> *Assunto:* Re: Not seeing jitter result in network test
> I think they should be with labels. Also, you can crop the last
> two digits (for all metrics) because they don't provide any
> additional information.
>
> About style, it should be changed in a complex for all system as I
> think.
>
> пт, 10 янв. 2020 г. в 13:06, Maxim Solodovnik
> <solomax666@gmail.com <ma...@gmail.com>>:
>
> So there should be 2 numbers:
> 34.986 ms
> 8.222 ms
>
> Or
> Avg 34.986 ms
> Jitter 8.222 ms
> (with labels) ?
>
> might require style changing ...
>
>
> On Fri, 10 Jan 2020 at 13:01, Денис Кандров
> <dendrov.kan@gmail.com <ma...@gmail.com>> wrote:
>
> Hello Maxim and Daniel,
>
> I think it's better to show "Average time" and
> "Jitter"(only first value '8.222ms') values. Because if we
> want to understand the impact of jitter on video streaming
> then we should know the average time of packet
> transmitting and deviation of this time.
> For a fast network, even a 50% jitter is not important.
> But if the network is not very fast it can already
> interfere with the video stream.
>
>
> пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik
> <solomax666@gmail.com <ma...@gmail.com>>:
>
> Hello Daniel,
>
> In fact this version mimics the behavior of old
> network testing tool
> Flash version has green bar without numbers
>
> @Denis maybe you know what can be displayed here?
>
>
> On Thu, 9 Jan 2020 at 14:36, Daniel Baker
> <info@collisiondetection.biz
> <ma...@collisiondetection.biz>> wrote:
>
> When I do the test at
> https://mywebsite:5443/openmeetings/hash?swf=network
> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>
> Version : 5.0.0-M3-SNAPSHOT
> Revision : 1a87265
> Build : 2019-11-28T08:48:49Z
>
> I can not see the result in the jitter section :
>
>
>
>
> --
> WBR
> Maxim aka solomax
>
>
>
> --
> WBR
> Maxim aka solomax
>
>
> ------------------------------------------------------------------------
>
> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>
> A informação contida neste correio electrónico é confidencial e
> privilegiada, destinando-se unicamente à pessoa ou entidade acima
> indicada. Se o leitor desta mensagem não for o seu destinatário,
> fica pela presente notificado de que qualquer divulgação,
> distribuição ou reprodução do respectivo conteúdo é expressa e
> estritamente proibida.
>
> The information contained in this e-mail is privileged and
> confidential and is intended only for the use of the individual or
> entity named above. If the reader of this message is not the
> intended recipient, you are hereby notified that any
> dissemination, distribution or copying of this communication is
> strictly prohibited.
>
>
>
> --
> WBR
> Maxim aka solomax
Re: Not seeing jitter result in network test
Posted by Maxim Solodovnik <so...@gmail.com>.
Great
Thanks!
On Wed, Jan 15, 2020, 21:27 Daniel Baker <dj...@gmail.com> wrote:
> On demo server it works.
>
> On Wed, 15 Jan 2020, 13:42 Maxim Solodovnik, <so...@gmail.com> wrote:
>
>> Could you be more specific and write in English please :)
>>
>> On Wed, 15 Jan 2020 at 20:15, Sansao Machiana <sa...@funae.co.mz>
>> wrote:
>>
>>> Sabe error
>>>
>>> Enviado do meu celular Huawei
>>>
>>> -------- Mensagem Original --------
>>> Assunto:Re: Not seeing jitter result in network test
>>> De:Maxim Solodovnik
>>> Para:Openmeetings user-list
>>> Cc:
>>>
>>> Demo is updated
>>> I believe it should look better now
>>>
>>> On Fri, 10 Jan 2020 at 14:27, Sansao Machiana <
>>> sansaomachiana@funae.co.mz> wrote:
>>>
>>>> hi.
>>>>
>>>>
>>>> im trying to install openmeeting live iso on my computer ( vmware) and
>>>> always a got this error can someone help me?
>>>>
>>>>
>>>> portugues: estou a tentar instalar o openmeeting usando o iso e estou a
>>>> ter o seguinte erro em anexo algum pode me ajudar?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> please
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Sansão Machiana
>>>>
>>>> *FUNAE - Fundo de Energia*
>>>>
>>>> *Unidade de Tecnologias de Informação e Comunicação*
>>>>
>>>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>>>
>>>> Tel. +258 21 304717/+258 21 304720
>>>>
>>>> E-mail: sansaomachiana@funae.co.mz
>>>>
>>>> Maputo - Moçambique
>>>>
>>>>
>>>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>>> ------------------------------
>>>> *De:* Денис Кандров <de...@gmail.com>
>>>> *Enviado:* 10 de janeiro de 2020 08:59:05
>>>> *Para:* Maxim Solodovnik
>>>> *Cc:* Openmeetings user-list
>>>> *Assunto:* Re: Not seeing jitter result in network test
>>>>
>>>> I think they should be with labels. Also, you can crop the last two
>>>> digits (for all metrics) because they don't provide any additional
>>>> information.
>>>>
>>>> About style, it should be changed in a complex for all system as I
>>>> think.
>>>>
>>>> пт, 10 янв. 2020 г. в 13:06, Maxim Solodovnik <so...@gmail.com>:
>>>>
>>>>> So there should be 2 numbers:
>>>>> 34.986 ms
>>>>> 8.222 ms
>>>>>
>>>>> Or
>>>>> Avg 34.986 ms
>>>>> Jitter 8.222 ms
>>>>> (with labels) ?
>>>>>
>>>>> might require style changing ...
>>>>>
>>>>>
>>>>> On Fri, 10 Jan 2020 at 13:01, Денис Кандров <de...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Maxim and Daniel,
>>>>>>
>>>>>> I think it's better to show "Average time" and "Jitter"(only first
>>>>>> value '8.222ms') values. Because if we want to understand the impact of
>>>>>> jitter on video streaming then we should know the average time of packet
>>>>>> transmitting and deviation of this time.
>>>>>> For a fast network, even a 50% jitter is not important. But if the
>>>>>> network is not very fast it can already interfere with the video stream.
>>>>>>
>>>>>>
>>>>>> пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik <so...@gmail.com>:
>>>>>>
>>>>>>> Hello Daniel,
>>>>>>>
>>>>>>> In fact this version mimics the behavior of old network testing tool
>>>>>>> Flash version has green bar without numbers
>>>>>>>
>>>>>>> @Denis maybe you know what can be displayed here?
>>>>>>>
>>>>>>>
>>>>>>> On Thu, 9 Jan 2020 at 14:36, Daniel Baker <
>>>>>>> info@collisiondetection.biz> wrote:
>>>>>>>
>>>>>>>> When I do the test at
>>>>>>>> https://mywebsite:5443/openmeetings/hash?swf=network
>>>>>>>> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>>>>>>>>
>>>>>>>> Version : 5.0.0-M3-SNAPSHOT
>>>>>>>> Revision : 1a87265
>>>>>>>> Build : 2019-11-28T08:48:49Z
>>>>>>>>
>>>>>>>> I can not see the result in the jitter section :
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> WBR
>>>>>>> Maxim aka solomax
>>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> WBR
>>>>> Maxim aka solomax
>>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>>>
>>>> A informação contida neste correio electrónico é confidencial e
>>>> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
>>>> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
>>>> notificado de que qualquer divulgação, distribuição ou reprodução do
>>>> respectivo conteúdo é expressa e estritamente proibida.
>>>>
>>>> The information contained in this e-mail is privileged and confidential
>>>> and is intended only for the use of the individual or entity named above.
>>>> If the reader of this message is not the intended recipient, you are hereby
>>>> notified that any dissemination, distribution or copying of this
>>>> communication is strictly prohibited.
>>>>
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>> ------------------------------
>>>
>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>>
>>> A informação contida neste correio electrónico é confidencial e
>>> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
>>> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
>>> notificado de que qualquer divulgação, distribuição ou reprodução do
>>> respectivo conteúdo é expressa e estritamente proibida.
>>>
>>> The information contained in this e-mail is privileged and confidential
>>> and is intended only for the use of the individual or entity named above.
>>> If the reader of this message is not the intended recipient, you are hereby
>>> notified that any dissemination, distribution or copying of this
>>> communication is strictly prohibited.
>>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
Re: Not seeing jitter result in network test
Posted by Daniel Baker <dj...@gmail.com>.
On demo server it works.
On Wed, 15 Jan 2020, 13:42 Maxim Solodovnik, <so...@gmail.com> wrote:
> Could you be more specific and write in English please :)
>
> On Wed, 15 Jan 2020 at 20:15, Sansao Machiana <sa...@funae.co.mz>
> wrote:
>
>> Sabe error
>>
>> Enviado do meu celular Huawei
>>
>> -------- Mensagem Original --------
>> Assunto:Re: Not seeing jitter result in network test
>> De:Maxim Solodovnik
>> Para:Openmeetings user-list
>> Cc:
>>
>> Demo is updated
>> I believe it should look better now
>>
>> On Fri, 10 Jan 2020 at 14:27, Sansao Machiana <sa...@funae.co.mz>
>> wrote:
>>
>>> hi.
>>>
>>>
>>> im trying to install openmeeting live iso on my computer ( vmware) and
>>> always a got this error can someone help me?
>>>
>>>
>>> portugues: estou a tentar instalar o openmeeting usando o iso e estou a
>>> ter o seguinte erro em anexo algum pode me ajudar?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> please
>>>
>>>
>>>
>>>
>>>
>>> Sansão Machiana
>>>
>>> *FUNAE - Fundo de Energia*
>>>
>>> *Unidade de Tecnologias de Informação e Comunicação*
>>>
>>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>>
>>> Tel. +258 21 304717/+258 21 304720
>>>
>>> E-mail: sansaomachiana@funae.co.mz
>>>
>>> Maputo - Moçambique
>>>
>>>
>>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>> ------------------------------
>>> *De:* Денис Кандров <de...@gmail.com>
>>> *Enviado:* 10 de janeiro de 2020 08:59:05
>>> *Para:* Maxim Solodovnik
>>> *Cc:* Openmeetings user-list
>>> *Assunto:* Re: Not seeing jitter result in network test
>>>
>>> I think they should be with labels. Also, you can crop the last two
>>> digits (for all metrics) because they don't provide any additional
>>> information.
>>>
>>> About style, it should be changed in a complex for all system as I think.
>>>
>>> пт, 10 янв. 2020 г. в 13:06, Maxim Solodovnik <so...@gmail.com>:
>>>
>>>> So there should be 2 numbers:
>>>> 34.986 ms
>>>> 8.222 ms
>>>>
>>>> Or
>>>> Avg 34.986 ms
>>>> Jitter 8.222 ms
>>>> (with labels) ?
>>>>
>>>> might require style changing ...
>>>>
>>>>
>>>> On Fri, 10 Jan 2020 at 13:01, Денис Кандров <de...@gmail.com>
>>>> wrote:
>>>>
>>>>> Hello Maxim and Daniel,
>>>>>
>>>>> I think it's better to show "Average time" and "Jitter"(only first
>>>>> value '8.222ms') values. Because if we want to understand the impact of
>>>>> jitter on video streaming then we should know the average time of packet
>>>>> transmitting and deviation of this time.
>>>>> For a fast network, even a 50% jitter is not important. But if the
>>>>> network is not very fast it can already interfere with the video stream.
>>>>>
>>>>>
>>>>> пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik <so...@gmail.com>:
>>>>>
>>>>>> Hello Daniel,
>>>>>>
>>>>>> In fact this version mimics the behavior of old network testing tool
>>>>>> Flash version has green bar without numbers
>>>>>>
>>>>>> @Denis maybe you know what can be displayed here?
>>>>>>
>>>>>>
>>>>>> On Thu, 9 Jan 2020 at 14:36, Daniel Baker <
>>>>>> info@collisiondetection.biz> wrote:
>>>>>>
>>>>>>> When I do the test at
>>>>>>> https://mywebsite:5443/openmeetings/hash?swf=network
>>>>>>> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>>>>>>>
>>>>>>> Version : 5.0.0-M3-SNAPSHOT
>>>>>>> Revision : 1a87265
>>>>>>> Build : 2019-11-28T08:48:49Z
>>>>>>>
>>>>>>> I can not see the result in the jitter section :
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> WBR
>>>>>> Maxim aka solomax
>>>>>>
>>>>>
>>>>
>>>> --
>>>> WBR
>>>> Maxim aka solomax
>>>>
>>>
>>> ------------------------------
>>>
>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>>
>>> A informação contida neste correio electrónico é confidencial e
>>> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
>>> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
>>> notificado de que qualquer divulgação, distribuição ou reprodução do
>>> respectivo conteúdo é expressa e estritamente proibida.
>>>
>>> The information contained in this e-mail is privileged and confidential
>>> and is intended only for the use of the individual or entity named above.
>>> If the reader of this message is not the intended recipient, you are hereby
>>> notified that any dissemination, distribution or copying of this
>>> communication is strictly prohibited.
>>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>> ------------------------------
>>
>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>
>> A informação contida neste correio electrónico é confidencial e
>> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
>> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
>> notificado de que qualquer divulgação, distribuição ou reprodução do
>> respectivo conteúdo é expressa e estritamente proibida.
>>
>> The information contained in this e-mail is privileged and confidential
>> and is intended only for the use of the individual or entity named above.
>> If the reader of this message is not the intended recipient, you are hereby
>> notified that any dissemination, distribution or copying of this
>> communication is strictly prohibited.
>>
>
>
> --
> WBR
> Maxim aka solomax
>
Re: Not seeing jitter result in network test
Posted by Maxim Solodovnik <so...@gmail.com>.
Could you be more specific and write in English please :)
On Wed, 15 Jan 2020 at 20:15, Sansao Machiana <sa...@funae.co.mz>
wrote:
> Sabe error
>
> Enviado do meu celular Huawei
>
> -------- Mensagem Original --------
> Assunto:Re: Not seeing jitter result in network test
> De:Maxim Solodovnik
> Para:Openmeetings user-list
> Cc:
>
> Demo is updated
> I believe it should look better now
>
> On Fri, 10 Jan 2020 at 14:27, Sansao Machiana <sa...@funae.co.mz>
> wrote:
>
>> hi.
>>
>>
>> im trying to install openmeeting live iso on my computer ( vmware) and
>> always a got this error can someone help me?
>>
>>
>> portugues: estou a tentar instalar o openmeeting usando o iso e estou a
>> ter o seguinte erro em anexo algum pode me ajudar?
>>
>>
>>
>>
>>
>>
>>
>>
>> please
>>
>>
>>
>>
>>
>> Sansão Machiana
>>
>> *FUNAE - Fundo de Energia*
>>
>> *Unidade de Tecnologias de Informação e Comunicação*
>>
>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>
>> Tel. +258 21 304717/+258 21 304720
>>
>> E-mail: sansaomachiana@funae.co.mz
>>
>> Maputo - Moçambique
>>
>>
>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>> ------------------------------
>> *De:* Денис Кандров <de...@gmail.com>
>> *Enviado:* 10 de janeiro de 2020 08:59:05
>> *Para:* Maxim Solodovnik
>> *Cc:* Openmeetings user-list
>> *Assunto:* Re: Not seeing jitter result in network test
>>
>> I think they should be with labels. Also, you can crop the last two
>> digits (for all metrics) because they don't provide any additional
>> information.
>>
>> About style, it should be changed in a complex for all system as I think.
>>
>> пт, 10 янв. 2020 г. в 13:06, Maxim Solodovnik <so...@gmail.com>:
>>
>>> So there should be 2 numbers:
>>> 34.986 ms
>>> 8.222 ms
>>>
>>> Or
>>> Avg 34.986 ms
>>> Jitter 8.222 ms
>>> (with labels) ?
>>>
>>> might require style changing ...
>>>
>>>
>>> On Fri, 10 Jan 2020 at 13:01, Денис Кандров <de...@gmail.com>
>>> wrote:
>>>
>>>> Hello Maxim and Daniel,
>>>>
>>>> I think it's better to show "Average time" and "Jitter"(only first
>>>> value '8.222ms') values. Because if we want to understand the impact of
>>>> jitter on video streaming then we should know the average time of packet
>>>> transmitting and deviation of this time.
>>>> For a fast network, even a 50% jitter is not important. But if the
>>>> network is not very fast it can already interfere with the video stream.
>>>>
>>>>
>>>> пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik <so...@gmail.com>:
>>>>
>>>>> Hello Daniel,
>>>>>
>>>>> In fact this version mimics the behavior of old network testing tool
>>>>> Flash version has green bar without numbers
>>>>>
>>>>> @Denis maybe you know what can be displayed here?
>>>>>
>>>>>
>>>>> On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>
>>>>> wrote:
>>>>>
>>>>>> When I do the test at
>>>>>> https://mywebsite:5443/openmeetings/hash?swf=network
>>>>>> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>>>>>>
>>>>>> Version : 5.0.0-M3-SNAPSHOT
>>>>>> Revision : 1a87265
>>>>>> Build : 2019-11-28T08:48:49Z
>>>>>>
>>>>>> I can not see the result in the jitter section :
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> WBR
>>>>> Maxim aka solomax
>>>>>
>>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>> ------------------------------
>>
>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>
>> A informação contida neste correio electrónico é confidencial e
>> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
>> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
>> notificado de que qualquer divulgação, distribuição ou reprodução do
>> respectivo conteúdo é expressa e estritamente proibida.
>>
>> The information contained in this e-mail is privileged and confidential
>> and is intended only for the use of the individual or entity named above.
>> If the reader of this message is not the intended recipient, you are hereby
>> notified that any dissemination, distribution or copying of this
>> communication is strictly prohibited.
>>
>
>
> --
> WBR
> Maxim aka solomax
>
> ------------------------------
>
> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>
> A informação contida neste correio electrónico é confidencial e
> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
> notificado de que qualquer divulgação, distribuição ou reprodução do
> respectivo conteúdo é expressa e estritamente proibida.
>
> The information contained in this e-mail is privileged and confidential
> and is intended only for the use of the individual or entity named above.
> If the reader of this message is not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this
> communication is strictly prohibited.
>
--
WBR
Maxim aka solomax
Re: Not seeing jitter result in network test
Posted by Sansao Machiana <sa...@funae.co.mz>.
Sabe error
Enviado do meu celular Huawei
-------- Mensagem Original --------
Assunto:Re: Not seeing jitter result in network test
De:Maxim Solodovnik
Para:Openmeetings user-list
Cc:
Demo is updated
I believe it should look better now
On Fri, 10 Jan 2020 at 14:27, Sansao Machiana <sa...@funae.co.mz>> wrote:
hi.
im trying to install openmeeting live iso on my computer ( vmware) and always a got this error can someone help me?
portugues: estou a tentar instalar o openmeeting usando o iso e estou a ter o seguinte erro em anexo algum pode me ajudar?
[X]
[X]
please
[http://www.funae.co.mz/images/logotipo.jpg]
Sans?o Machiana
FUNAE - Fundo de Energia
Unidade de Tecnologias de Informa??o e Comunica??o
R. da Imprensa, n? 256 - 6? andar, porta 607 - 610
Tel. +258 21 304717/+258 21 304720
E-mail: sansaomachiana@funae.co.mz<ma...@funae.co.mz>
Maputo - Mo?ambique
Por favor pense no Meio Ambiente, antes de imprimir este e-mail
________________________________
De: ????? ??????? <de...@gmail.com>>
Enviado: 10 de janeiro de 2020 08:59:05
Para: Maxim Solodovnik
Cc: Openmeetings user-list
Assunto: Re: Not seeing jitter result in network test
I think they should be with labels. Also, you can crop the last two digits (for all metrics) because they don't provide any additional information.
About style, it should be changed in a complex for all system as I think.
??, 10 ???. 2020 ?. ? 13:06, Maxim Solodovnik <so...@gmail.com>>:
So there should be 2 numbers:
34.986 ms
8.222 ms
Or
Avg 34.986 ms
Jitter 8.222 ms
(with labels) ?
might require style changing ...
On Fri, 10 Jan 2020 at 13:01, ????? ??????? <de...@gmail.com>> wrote:
Hello Maxim and Daniel,
I think it's better to show "Average time" and "Jitter"(only first value '8.222ms') values. Because if we want to understand the impact of jitter on video streaming then we should know the average time of packet transmitting and deviation of this time.
For a fast network, even a 50% jitter is not important. But if the network is not very fast it can already interfere with the video stream.
??, 10 ???. 2020 ?. ? 12:15, Maxim Solodovnik <so...@gmail.com>>:
Hello Daniel,
In fact this version mimics the behavior of old network testing tool
Flash version has green bar without numbers
@Denis maybe you know what can be displayed here?
On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>> wrote:
When I do the test at https://mywebsite:5443/openmeetings/hash?swf=network<https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
Version : 5.0.0-M3-SNAPSHOT
Revision : 1a87265
Build : 2019-11-28T08:48:49Z
I can not see the result in the jitter section :
[cid:16fa4a729e8893471031]
--
WBR
Maxim aka solomax
--
WBR
Maxim aka solomax
________________________________
FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
A informa??o contida neste correio electr?nico ? confidencial e privilegiada, destinando-se unicamente ? pessoa ou entidade acima indicada. Se o leitor desta mensagem n?o for o seu destinat?rio, fica pela presente notificado de que qualquer divulga??o, distribui??o ou reprodu??o do respectivo conte?do ? expressa e estritamente proibida.
The information contained in this e-mail is privileged and confidential and is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
--
WBR
Maxim aka solomax
________________________________
FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
A informa??o contida neste correio electr?nico ? confidencial e privilegiada, destinando-se unicamente ? pessoa ou entidade acima indicada. Se o leitor desta mensagem n?o for o seu destinat?rio, fica pela presente notificado de que qualquer divulga??o, distribui??o ou reprodu??o do respectivo conte?do ? expressa e estritamente proibida.
The information contained in this e-mail is privileged and confidential and is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
Re: Not seeing jitter result in network test
Posted by Maxim Solodovnik <so...@gmail.com>.
Demo is updated
I believe it should look better now
On Fri, 10 Jan 2020 at 14:27, Sansao Machiana <sa...@funae.co.mz>
wrote:
> hi.
>
>
> im trying to install openmeeting live iso on my computer ( vmware) and
> always a got this error can someone help me?
>
>
> portugues: estou a tentar instalar o openmeeting usando o iso e estou a
> ter o seguinte erro em anexo algum pode me ajudar?
>
>
>
>
>
>
>
>
> please
>
>
>
>
>
> Sansão Machiana
>
> *FUNAE - Fundo de Energia*
>
> *Unidade de Tecnologias de Informação e Comunicação*
>
> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>
> Tel. +258 21 304717/+258 21 304720
>
> E-mail: sansaomachiana@funae.co.mz
>
> Maputo - Moçambique
>
>
> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
> ------------------------------
> *De:* Денис Кандров <de...@gmail.com>
> *Enviado:* 10 de janeiro de 2020 08:59:05
> *Para:* Maxim Solodovnik
> *Cc:* Openmeetings user-list
> *Assunto:* Re: Not seeing jitter result in network test
>
> I think they should be with labels. Also, you can crop the last two digits
> (for all metrics) because they don't provide any additional information.
>
> About style, it should be changed in a complex for all system as I think.
>
> пт, 10 янв. 2020 г. в 13:06, Maxim Solodovnik <so...@gmail.com>:
>
>> So there should be 2 numbers:
>> 34.986 ms
>> 8.222 ms
>>
>> Or
>> Avg 34.986 ms
>> Jitter 8.222 ms
>> (with labels) ?
>>
>> might require style changing ...
>>
>>
>> On Fri, 10 Jan 2020 at 13:01, Денис Кандров <de...@gmail.com>
>> wrote:
>>
>>> Hello Maxim and Daniel,
>>>
>>> I think it's better to show "Average time" and "Jitter"(only first value
>>> '8.222ms') values. Because if we want to understand the impact of jitter on
>>> video streaming then we should know the average time of packet transmitting
>>> and deviation of this time.
>>> For a fast network, even a 50% jitter is not important. But if the
>>> network is not very fast it can already interfere with the video stream.
>>>
>>>
>>> пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik <so...@gmail.com>:
>>>
>>>> Hello Daniel,
>>>>
>>>> In fact this version mimics the behavior of old network testing tool
>>>> Flash version has green bar without numbers
>>>>
>>>> @Denis maybe you know what can be displayed here?
>>>>
>>>>
>>>> On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>
>>>> wrote:
>>>>
>>>>> When I do the test at
>>>>> https://mywebsite:5443/openmeetings/hash?swf=network
>>>>> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>>>>>
>>>>> Version : 5.0.0-M3-SNAPSHOT
>>>>> Revision : 1a87265
>>>>> Build : 2019-11-28T08:48:49Z
>>>>>
>>>>> I can not see the result in the jitter section :
>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> WBR
>>>> Maxim aka solomax
>>>>
>>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
> ------------------------------
>
> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>
> A informação contida neste correio electrónico é confidencial e
> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
> notificado de que qualquer divulgação, distribuição ou reprodução do
> respectivo conteúdo é expressa e estritamente proibida.
>
> The information contained in this e-mail is privileged and confidential
> and is intended only for the use of the individual or entity named above.
> If the reader of this message is not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this
> communication is strictly prohibited.
>
--
WBR
Maxim aka solomax
RE: Not seeing jitter result in network test
Posted by Sansao Machiana <sa...@funae.co.mz>.
hi.
im trying to install openmeeting live iso on my computer ( vmware) and always a got this error can someone help me?
portugues: estou a tentar instalar o openmeeting usando o iso e estou a ter o seguinte erro em anexo algum pode me ajudar?
[X]
[X]
please
[http://www.funae.co.mz/images/logotipo.jpg]
Sans?o Machiana
FUNAE - Fundo de Energia
Unidade de Tecnologias de Informa??o e Comunica??o
R. da Imprensa, n? 256 - 6? andar, porta 607 - 610
Tel. +258 21 304717/+258 21 304720
E-mail: sansaomachiana@funae.co.mz
Maputo - Mo?ambique
Por favor pense no Meio Ambiente, antes de imprimir este e-mail
________________________________
De: ????? ??????? <de...@gmail.com>
Enviado: 10 de janeiro de 2020 08:59:05
Para: Maxim Solodovnik
Cc: Openmeetings user-list
Assunto: Re: Not seeing jitter result in network test
I think they should be with labels. Also, you can crop the last two digits (for all metrics) because they don't provide any additional information.
About style, it should be changed in a complex for all system as I think.
??, 10 ???. 2020 ?. ? 13:06, Maxim Solodovnik <so...@gmail.com>>:
So there should be 2 numbers:
34.986 ms
8.222 ms
Or
Avg 34.986 ms
Jitter 8.222 ms
(with labels) ?
might require style changing ...
On Fri, 10 Jan 2020 at 13:01, ????? ??????? <de...@gmail.com>> wrote:
Hello Maxim and Daniel,
I think it's better to show "Average time" and "Jitter"(only first value '8.222ms') values. Because if we want to understand the impact of jitter on video streaming then we should know the average time of packet transmitting and deviation of this time.
For a fast network, even a 50% jitter is not important. But if the network is not very fast it can already interfere with the video stream.
??, 10 ???. 2020 ?. ? 12:15, Maxim Solodovnik <so...@gmail.com>>:
Hello Daniel,
In fact this version mimics the behavior of old network testing tool
Flash version has green bar without numbers
@Denis maybe you know what can be displayed here?
On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>> wrote:
When I do the test at https://mywebsite:5443/openmeetings/hash?swf=network<https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
Version : 5.0.0-M3-SNAPSHOT
Revision : 1a87265
Build : 2019-11-28T08:48:49Z
I can not see the result in the jitter section :
[cid:16f8dd37c18893471031]
--
WBR
Maxim aka solomax
--
WBR
Maxim aka solomax
________________________________
FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
A informa??o contida neste correio electr?nico ? confidencial e privilegiada, destinando-se unicamente ? pessoa ou entidade acima indicada. Se o leitor desta mensagem n?o for o seu destinat?rio, fica pela presente notificado de que qualquer divulga??o, distribui??o ou reprodu??o do respectivo conte?do ? expressa e estritamente proibida.
The information contained in this e-mail is privileged and confidential and is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
Re: Not seeing jitter result in network test
Posted by Maxim Solodovnik <so...@gmail.com>.
I mean current "green area"of network testing tool might be too small :))
Will do the change and update the demo-next so you can check :)
On Fri, 10 Jan 2020 at 13:59, Денис Кандров <de...@gmail.com> wrote:
> I think they should be with labels. Also, you can crop the last two digits
> (for all metrics) because they don't provide any additional information.
>
> About style, it should be changed in a complex for all system as I think.
>
> пт, 10 янв. 2020 г. в 13:06, Maxim Solodovnik <so...@gmail.com>:
>
>> So there should be 2 numbers:
>> 34.986 ms
>> 8.222 ms
>>
>> Or
>> Avg 34.986 ms
>> Jitter 8.222 ms
>> (with labels) ?
>>
>> might require style changing ...
>>
>>
>> On Fri, 10 Jan 2020 at 13:01, Денис Кандров <de...@gmail.com>
>> wrote:
>>
>>> Hello Maxim and Daniel,
>>>
>>> I think it's better to show "Average time" and "Jitter"(only first value
>>> '8.222ms') values. Because if we want to understand the impact of jitter on
>>> video streaming then we should know the average time of packet transmitting
>>> and deviation of this time.
>>> For a fast network, even a 50% jitter is not important. But if the
>>> network is not very fast it can already interfere with the video stream.
>>>
>>>
>>> пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik <so...@gmail.com>:
>>>
>>>> Hello Daniel,
>>>>
>>>> In fact this version mimics the behavior of old network testing tool
>>>> Flash version has green bar without numbers
>>>>
>>>> @Denis maybe you know what can be displayed here?
>>>>
>>>>
>>>> On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>
>>>> wrote:
>>>>
>>>>> When I do the test at
>>>>> https://mywebsite:5443/openmeetings/hash?swf=network
>>>>> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>>>>>
>>>>> Version : 5.0.0-M3-SNAPSHOT
>>>>> Revision : 1a87265
>>>>> Build : 2019-11-28T08:48:49Z
>>>>>
>>>>> I can not see the result in the jitter section :
>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> WBR
>>>> Maxim aka solomax
>>>>
>>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
--
WBR
Maxim aka solomax
Re: Not seeing jitter result in network test
Posted by Денис Кандров <de...@gmail.com>.
I think they should be with labels. Also, you can crop the last two digits
(for all metrics) because they don't provide any additional information.
About style, it should be changed in a complex for all system as I think.
пт, 10 янв. 2020 г. в 13:06, Maxim Solodovnik <so...@gmail.com>:
> So there should be 2 numbers:
> 34.986 ms
> 8.222 ms
>
> Or
> Avg 34.986 ms
> Jitter 8.222 ms
> (with labels) ?
>
> might require style changing ...
>
>
> On Fri, 10 Jan 2020 at 13:01, Денис Кандров <de...@gmail.com> wrote:
>
>> Hello Maxim and Daniel,
>>
>> I think it's better to show "Average time" and "Jitter"(only first value
>> '8.222ms') values. Because if we want to understand the impact of jitter on
>> video streaming then we should know the average time of packet transmitting
>> and deviation of this time.
>> For a fast network, even a 50% jitter is not important. But if the
>> network is not very fast it can already interfere with the video stream.
>>
>>
>> пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik <so...@gmail.com>:
>>
>>> Hello Daniel,
>>>
>>> In fact this version mimics the behavior of old network testing tool
>>> Flash version has green bar without numbers
>>>
>>> @Denis maybe you know what can be displayed here?
>>>
>>>
>>> On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>
>>> wrote:
>>>
>>>> When I do the test at
>>>> https://mywebsite:5443/openmeetings/hash?swf=network
>>>> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>>>>
>>>> Version : 5.0.0-M3-SNAPSHOT
>>>> Revision : 1a87265
>>>> Build : 2019-11-28T08:48:49Z
>>>>
>>>> I can not see the result in the jitter section :
>>>>
>>>>
>>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>
> --
> WBR
> Maxim aka solomax
>
Re: Not seeing jitter result in network test
Posted by Maxim Solodovnik <so...@gmail.com>.
So there should be 2 numbers:
34.986 ms
8.222 ms
Or
Avg 34.986 ms
Jitter 8.222 ms
(with labels) ?
might require style changing ...
On Fri, 10 Jan 2020 at 13:01, Денис Кандров <de...@gmail.com> wrote:
> Hello Maxim and Daniel,
>
> I think it's better to show "Average time" and "Jitter"(only first value
> '8.222ms') values. Because if we want to understand the impact of jitter on
> video streaming then we should know the average time of packet transmitting
> and deviation of this time.
> For a fast network, even a 50% jitter is not important. But if the network
> is not very fast it can already interfere with the video stream.
>
>
> пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik <so...@gmail.com>:
>
>> Hello Daniel,
>>
>> In fact this version mimics the behavior of old network testing tool
>> Flash version has green bar without numbers
>>
>> @Denis maybe you know what can be displayed here?
>>
>>
>> On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>
>> wrote:
>>
>>> When I do the test at
>>> https://mywebsite:5443/openmeetings/hash?swf=network
>>> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>>>
>>> Version : 5.0.0-M3-SNAPSHOT
>>> Revision : 1a87265
>>> Build : 2019-11-28T08:48:49Z
>>>
>>> I can not see the result in the jitter section :
>>>
>>>
>>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
--
WBR
Maxim aka solomax
Re: Not seeing jitter result in network test
Posted by Денис Кандров <de...@gmail.com>.
Hello Maxim and Daniel,
I think it's better to show "Average time" and "Jitter"(only first value
'8.222ms') values. Because if we want to understand the impact of jitter on
video streaming then we should know the average time of packet transmitting
and deviation of this time.
For a fast network, even a 50% jitter is not important. But if the network
is not very fast it can already interfere with the video stream.
пт, 10 янв. 2020 г. в 12:15, Maxim Solodovnik <so...@gmail.com>:
> Hello Daniel,
>
> In fact this version mimics the behavior of old network testing tool
> Flash version has green bar without numbers
>
> @Denis maybe you know what can be displayed here?
>
>
> On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>
> wrote:
>
>> When I do the test at
>> https://mywebsite:5443/openmeetings/hash?swf=network
>> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>>
>> Version : 5.0.0-M3-SNAPSHOT
>> Revision : 1a87265
>> Build : 2019-11-28T08:48:49Z
>>
>> I can not see the result in the jitter section :
>>
>>
>>
>
> --
> WBR
> Maxim aka solomax
>
Re: Not seeing jitter result in network test
Posted by Maxim Solodovnik <so...@gmail.com>.
Hello Daniel,
In fact this version mimics the behavior of old network testing tool
Flash version has green bar without numbers
@Denis maybe you know what can be displayed here?
On Thu, 9 Jan 2020 at 14:36, Daniel Baker <in...@collisiondetection.biz>
wrote:
> When I do the test at
> https://mywebsite:5443/openmeetings/hash?swf=network
> <https://ukom.hopto.org:5443/openmeetings/hash?swf=network>
>
> Version : 5.0.0-M3-SNAPSHOT
> Revision : 1a87265
> Build : 2019-11-28T08:48:49Z
>
> I can not see the result in the jitter section :
>
>
>
--
WBR
Maxim aka solomax