You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@arrow.apache.org by Dewey Dunnington <de...@voltrondata.com.INVALID> on 2023/03/01 17:03:44 UTC
[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Hello,
I would like to propose the following release candidate (RC1) of Apache
Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting of
31 resolved GitHub issues [1].
Special thanks to David Li for his reviews and support during the
preparation of this initial release candidate!
This release candidate is based on commit:
341279af1b2fdede36871d212f339083ffbd75eb [2]
The source release rc1 is hosted at [3].
The changelog is located at [4].
Please download, verify checksums and signatures, run the unit tests, and
vote on the release. See [5] for how to validate a release candidate.
The vote will be open for at least 72 hours.
[ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
[ ] +0
[ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
[0] https://github.com/apache/arrow-nanoarrow
[1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
[2]
https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
[3]
https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
[4]
https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
[5]
https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by David Li <li...@apache.org>.
+1 (binding)
Verified on macOS 13.2/aarch64
I had to use system R instead of Conda R.
On Wed, Mar 1, 2023, at 12:52, Will Jones wrote:
> +1 (non-binding). Verified with Conda on MacOS aarch64.
>
> Note: I needed to add gtest to the conda environment. Otherwise it went
> smoothly. [1]
>
> [1] https://github.com/apache/arrow-nanoarrow/pull/138
>
> On Wed, Mar 1, 2023 at 9:04 AM Dewey Dunnington
> <de...@voltrondata.com.invalid> wrote:
>
>> Hello,
>>
>> I would like to propose the following release candidate (RC1) of Apache
>> Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting of
>> 31 resolved GitHub issues [1].
>>
>> Special thanks to David Li for his reviews and support during the
>> preparation of this initial release candidate!
>>
>> This release candidate is based on commit:
>> 341279af1b2fdede36871d212f339083ffbd75eb [2]
>>
>> The source release rc1 is hosted at [3].
>> The changelog is located at [4].
>>
>> Please download, verify checksums and signatures, run the unit tests, and
>> vote on the release. See [5] for how to validate a release candidate.
>>
>> The vote will be open for at least 72 hours.
>>
>> [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
>> [ ] +0
>> [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
>>
>> [0] https://github.com/apache/arrow-nanoarrow
>> [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
>> [2]
>>
>> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
>> [3]
>>
>> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
>> [4]
>>
>> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
>> [5]
>> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Will Jones <wi...@gmail.com>.
+1 (non-binding). Verified with Conda on MacOS aarch64.
Note: I needed to add gtest to the conda environment. Otherwise it went
smoothly. [1]
[1] https://github.com/apache/arrow-nanoarrow/pull/138
On Wed, Mar 1, 2023 at 9:04 AM Dewey Dunnington
<de...@voltrondata.com.invalid> wrote:
> Hello,
>
> I would like to propose the following release candidate (RC1) of Apache
> Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting of
> 31 resolved GitHub issues [1].
>
> Special thanks to David Li for his reviews and support during the
> preparation of this initial release candidate!
>
> This release candidate is based on commit:
> 341279af1b2fdede36871d212f339083ffbd75eb [2]
>
> The source release rc1 is hosted at [3].
> The changelog is located at [4].
>
> Please download, verify checksums and signatures, run the unit tests, and
> vote on the release. See [5] for how to validate a release candidate.
>
> The vote will be open for at least 72 hours.
>
> [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> [ ] +0
> [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
>
> [0] https://github.com/apache/arrow-nanoarrow
> [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> [2]
>
> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> [3]
>
> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> [4]
>
> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> [5]
> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Bryce Mecum <pe...@gmail.com>.
+1 (non-binding)
Verified on:
- Fedora 37 (amd64)
- Debian 11 (amd64)
On Wed, Mar 1, 2023 at 8:04 AM Dewey Dunnington
<de...@voltrondata.com.invalid> wrote:
> Hello,
>
> I would like to propose the following release candidate (RC1) of Apache
> Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting of
> 31 resolved GitHub issues [1].
>
> Special thanks to David Li for his reviews and support during the
> preparation of this initial release candidate!
>
> This release candidate is based on commit:
> 341279af1b2fdede36871d212f339083ffbd75eb [2]
>
> The source release rc1 is hosted at [3].
> The changelog is located at [4].
>
> Please download, verify checksums and signatures, run the unit tests, and
> vote on the release. See [5] for how to validate a release candidate.
>
> The vote will be open for at least 72 hours.
>
> [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> [ ] +0
> [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
>
> [0] https://github.com/apache/arrow-nanoarrow
> [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> [2]
>
> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> [3]
>
> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> [4]
>
> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> [5]
> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>
Re: [RESULT][VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Dewey Dunnington <de...@voltrondata.com.INVALID>.
Absolutely! By the next time this happens I hope to be better at this :-)
The post-release taks are all complete!
[x] Closed GitHub milestone
[x] Added release to Apache Reporter System (Thanks David!)
[x] Uploaded artifacts to Subversion (Thanks David!)
[x] Created GitHub release
[x] Submit R package to CRAN (fingers crossed!)
[x] Sent announcement to announce@apache.org
[x] Release blog post at https://github.com/apache/arrow-site/pull/288
(arrow-site build is currently failing but post should be live when it
is resurrected)
[x] Removed old artifacts from SVN
[x] Bumped versions on main
Thank you all!
On Tue, Mar 7, 2023 at 5:28 PM Sutou Kouhei <ko...@clear-code.com> wrote:
>
> Hi,
>
> I prepended "[RESULT]" to the subject.
>
> Dewey, could you use "[RESULT][VOTE] ..." subject for a vote
> result e-mail next time? It's for easy to find.
>
> A recent example:
> [RESULT][VOTE][RUST] Release Apache Arrow Rust Object Store 0.5.5 RC1
> https://lists.apache.org/thread/ybqvx5k2lnyotnh6yq5xzzp80x09fl1c
>
>
> Thanks,
> --
> kou
>
> In <CA...@mail.gmail.com>
> "Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Tue, 7 Mar 2023 12:16:12 -0400,
> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
>
> > Thank you everybody for verifying and voting! With 4 binding +1s and 5
> > non-binding +1s, the vote passes!
> >
> > The first release of Apache Arrow nanoarrow has the following post-release
> > tasks. I believe the upload step requires a PMC member to run the script
> > but the rest I'm happy to take care of!
> >
> > [x] Closed GitHub milestone
> > [ ] Added release to Apache Reporter System
> > [ ] Uploaded artifacts to Subversion
> > [ ] Created GitHub release
> > [ ] Submit R package to CRAN
> > [ ] Sent announcement to announce@apache.org
> > [ ] Release blog post at https://github.com/apache/arrow-site/pull/288
> > [ ] Removed old artifacts from SVN
> > [ ] Bumped versions on main
> >
> >
> >
> > On Thu, Mar 2, 2023 at 11:35 PM Jacob Wujciak <ja...@voltrondata.com.invalid>
> > wrote:
> >
> >> +1 (non-binding) verified on manjaro
> >>
> >> On Fri, Mar 3, 2023 at 1:37 AM Sutou Kouhei <ko...@clear-code.com> wrote:
> >>
> >> > +1
> >> >
> >> > This was because I already installed the old 'arrow' R
> >> > package (8.0.0). I upgraded it to 11.0.0 and it
> >> > worked. Thanks to Dewey for helping me!
> >> >
> >> > Thanks,
> >> > --
> >> > kou
> >> >
> >> > In <CA...@mail.gmail.com>
> >> > "Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
> >> > 2023 22:35:00 -0400,
> >> > Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
> >> >
> >> > > Thank you!
> >> > >
> >> > > I've followed up on an issue [1], but I believe the problem is that the
> >> > > version of the 'arrow' R package that is installed is before 10.0.0
> >> when
> >> > > the tested features were added. In the R package DESCRIPTION the
> >> version
> >> > > constraint is >= 9.0.0, which should be updated (or those tests should
> >> be
> >> > > skipped for old versions of arrow).
> >> > >
> >> > > [1] https://github.com/apache/arrow-nanoarrow/issues/141
> >> > >
> >> > > On Wed, Mar 1, 2023 at 7:53 PM Sutou Kouhei <ko...@clear-code.com>
> >> wrote:
> >> > >
> >> > >> -0
> >> > >>
> >> > >> I ran the following command line on Debian GNU/Linux sid:
> >> > >>
> >> > >> NANOARROW_CMAKE_OPTIONS=-DCMAKE_PREFIX_PATH=/tmp/local \
> >> > >> dev/release/verify-release-candidate.sh 0.1.0 1
> >> > >>
> >> > >> with:
> >> > >>
> >> > >> * Apache Arrow C++ main
> >> > >> * R version 4.2.2 Patched (2022-11-10 r83330)
> >> > >>
> >> > >> I got 4 R failures:
> >> > >>
> >> > >>
> >> > >>
> >> >
> >> https://gist.github.com/kou/1194cf28cb8e70fe309d0f07e6f49b3b#file-testthat-rout-fail
> >> > >>
> >> > >> I'm not sure whether they are caused by my wrong setup or
> >> > >> not. Could someone check the failures?
> >> > >>
> >> > >> Thanks,
> >> > >> --
> >> > >> kou
> >> > >>
> >> > >> In <
> >> CAFb7qSfX3jCb6wnxcmpNqJ_iEeY8RXFEE8E+ZF2gudYyJXie7Q@mail.gmail.com>
> >> > >> "[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
> >> 2023
> >> > >> 13:03:44 -0400,
> >> > >> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
> >> > >>
> >> > >> > Hello,
> >> > >> >
> >> > >> > I would like to propose the following release candidate (RC1) of
> >> > Apache
> >> > >> > Arrow nanoarrow [0] version 0.1.0. This is an initial release
> >> > consisting
> >> > >> of
> >> > >> > 31 resolved GitHub issues [1].
> >> > >> >
> >> > >> > Special thanks to David Li for his reviews and support during the
> >> > >> > preparation of this initial release candidate!
> >> > >> >
> >> > >> > This release candidate is based on commit:
> >> > >> > 341279af1b2fdede36871d212f339083ffbd75eb [2]
> >> > >> >
> >> > >> > The source release rc1 is hosted at [3].
> >> > >> > The changelog is located at [4].
> >> > >> >
> >> > >> > Please download, verify checksums and signatures, run the unit
> >> tests,
> >> > and
> >> > >> > vote on the release. See [5] for how to validate a release
> >> candidate.
> >> > >> >
> >> > >> > The vote will be open for at least 72 hours.
> >> > >> >
> >> > >> > [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> >> > >> > [ ] +0
> >> > >> > [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0
> >> because...
> >> > >> >
> >> > >> > [0] https://github.com/apache/arrow-nanoarrow
> >> > >> > [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> >> > >> > [2]
> >> > >> >
> >> > >>
> >> >
> >> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> >> > >> > [3]
> >> > >> >
> >> > >>
> >> >
> >> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> >> > >> > [4]
> >> > >> >
> >> > >>
> >> >
> >> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> >> > >> > [5]
> >> > >> >
> >> > >>
> >> >
> >> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
> >> > >>
> >> >
> >>
[RESULT][VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Sutou Kouhei <ko...@clear-code.com>.
Hi,
I prepended "[RESULT]" to the subject.
Dewey, could you use "[RESULT][VOTE] ..." subject for a vote
result e-mail next time? It's for easy to find.
A recent example:
[RESULT][VOTE][RUST] Release Apache Arrow Rust Object Store 0.5.5 RC1
https://lists.apache.org/thread/ybqvx5k2lnyotnh6yq5xzzp80x09fl1c
Thanks,
--
kou
In <CA...@mail.gmail.com>
"Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Tue, 7 Mar 2023 12:16:12 -0400,
Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
> Thank you everybody for verifying and voting! With 4 binding +1s and 5
> non-binding +1s, the vote passes!
>
> The first release of Apache Arrow nanoarrow has the following post-release
> tasks. I believe the upload step requires a PMC member to run the script
> but the rest I'm happy to take care of!
>
> [x] Closed GitHub milestone
> [ ] Added release to Apache Reporter System
> [ ] Uploaded artifacts to Subversion
> [ ] Created GitHub release
> [ ] Submit R package to CRAN
> [ ] Sent announcement to announce@apache.org
> [ ] Release blog post at https://github.com/apache/arrow-site/pull/288
> [ ] Removed old artifacts from SVN
> [ ] Bumped versions on main
>
>
>
> On Thu, Mar 2, 2023 at 11:35 PM Jacob Wujciak <ja...@voltrondata.com.invalid>
> wrote:
>
>> +1 (non-binding) verified on manjaro
>>
>> On Fri, Mar 3, 2023 at 1:37 AM Sutou Kouhei <ko...@clear-code.com> wrote:
>>
>> > +1
>> >
>> > This was because I already installed the old 'arrow' R
>> > package (8.0.0). I upgraded it to 11.0.0 and it
>> > worked. Thanks to Dewey for helping me!
>> >
>> > Thanks,
>> > --
>> > kou
>> >
>> > In <CA...@mail.gmail.com>
>> > "Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
>> > 2023 22:35:00 -0400,
>> > Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
>> >
>> > > Thank you!
>> > >
>> > > I've followed up on an issue [1], but I believe the problem is that the
>> > > version of the 'arrow' R package that is installed is before 10.0.0
>> when
>> > > the tested features were added. In the R package DESCRIPTION the
>> version
>> > > constraint is >= 9.0.0, which should be updated (or those tests should
>> be
>> > > skipped for old versions of arrow).
>> > >
>> > > [1] https://github.com/apache/arrow-nanoarrow/issues/141
>> > >
>> > > On Wed, Mar 1, 2023 at 7:53 PM Sutou Kouhei <ko...@clear-code.com>
>> wrote:
>> > >
>> > >> -0
>> > >>
>> > >> I ran the following command line on Debian GNU/Linux sid:
>> > >>
>> > >> NANOARROW_CMAKE_OPTIONS=-DCMAKE_PREFIX_PATH=/tmp/local \
>> > >> dev/release/verify-release-candidate.sh 0.1.0 1
>> > >>
>> > >> with:
>> > >>
>> > >> * Apache Arrow C++ main
>> > >> * R version 4.2.2 Patched (2022-11-10 r83330)
>> > >>
>> > >> I got 4 R failures:
>> > >>
>> > >>
>> > >>
>> >
>> https://gist.github.com/kou/1194cf28cb8e70fe309d0f07e6f49b3b#file-testthat-rout-fail
>> > >>
>> > >> I'm not sure whether they are caused by my wrong setup or
>> > >> not. Could someone check the failures?
>> > >>
>> > >> Thanks,
>> > >> --
>> > >> kou
>> > >>
>> > >> In <
>> CAFb7qSfX3jCb6wnxcmpNqJ_iEeY8RXFEE8E+ZF2gudYyJXie7Q@mail.gmail.com>
>> > >> "[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
>> 2023
>> > >> 13:03:44 -0400,
>> > >> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
>> > >>
>> > >> > Hello,
>> > >> >
>> > >> > I would like to propose the following release candidate (RC1) of
>> > Apache
>> > >> > Arrow nanoarrow [0] version 0.1.0. This is an initial release
>> > consisting
>> > >> of
>> > >> > 31 resolved GitHub issues [1].
>> > >> >
>> > >> > Special thanks to David Li for his reviews and support during the
>> > >> > preparation of this initial release candidate!
>> > >> >
>> > >> > This release candidate is based on commit:
>> > >> > 341279af1b2fdede36871d212f339083ffbd75eb [2]
>> > >> >
>> > >> > The source release rc1 is hosted at [3].
>> > >> > The changelog is located at [4].
>> > >> >
>> > >> > Please download, verify checksums and signatures, run the unit
>> tests,
>> > and
>> > >> > vote on the release. See [5] for how to validate a release
>> candidate.
>> > >> >
>> > >> > The vote will be open for at least 72 hours.
>> > >> >
>> > >> > [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
>> > >> > [ ] +0
>> > >> > [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0
>> because...
>> > >> >
>> > >> > [0] https://github.com/apache/arrow-nanoarrow
>> > >> > [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
>> > >> > [2]
>> > >> >
>> > >>
>> >
>> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
>> > >> > [3]
>> > >> >
>> > >>
>> >
>> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
>> > >> > [4]
>> > >> >
>> > >>
>> >
>> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
>> > >> > [5]
>> > >> >
>> > >>
>> >
>> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>> > >>
>> >
>>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by David Li <li...@apache.org>.
I ran post-01-upload.sh. Thanks Dewey!
[x] Closed GitHub milestone
[ ] Added release to Apache Reporter System
[x] Uploaded artifacts to Subversion
[ ] Created GitHub release
[ ] Submit R package to CRAN
[ ] Sent announcement to announce@apache.org
[ ] Release blog post at https://github.com/apache/arrow-site/pull/288
[ ] Removed old artifacts from SVN
[ ] Bumped versions on main
On Tue, Mar 7, 2023, at 11:16, Dewey Dunnington wrote:
> Thank you everybody for verifying and voting! With 4 binding +1s and 5
> non-binding +1s, the vote passes!
>
> The first release of Apache Arrow nanoarrow has the following post-release
> tasks. I believe the upload step requires a PMC member to run the script
> but the rest I'm happy to take care of!
>
> [x] Closed GitHub milestone
> [ ] Added release to Apache Reporter System
> [ ] Uploaded artifacts to Subversion
> [ ] Created GitHub release
> [ ] Submit R package to CRAN
> [ ] Sent announcement to announce@apache.org
> [ ] Release blog post at https://github.com/apache/arrow-site/pull/288
> [ ] Removed old artifacts from SVN
> [ ] Bumped versions on main
>
>
>
> On Thu, Mar 2, 2023 at 11:35 PM Jacob Wujciak <ja...@voltrondata.com.invalid>
> wrote:
>
>> +1 (non-binding) verified on manjaro
>>
>> On Fri, Mar 3, 2023 at 1:37 AM Sutou Kouhei <ko...@clear-code.com> wrote:
>>
>> > +1
>> >
>> > This was because I already installed the old 'arrow' R
>> > package (8.0.0). I upgraded it to 11.0.0 and it
>> > worked. Thanks to Dewey for helping me!
>> >
>> > Thanks,
>> > --
>> > kou
>> >
>> > In <CA...@mail.gmail.com>
>> > "Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
>> > 2023 22:35:00 -0400,
>> > Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
>> >
>> > > Thank you!
>> > >
>> > > I've followed up on an issue [1], but I believe the problem is that the
>> > > version of the 'arrow' R package that is installed is before 10.0.0
>> when
>> > > the tested features were added. In the R package DESCRIPTION the
>> version
>> > > constraint is >= 9.0.0, which should be updated (or those tests should
>> be
>> > > skipped for old versions of arrow).
>> > >
>> > > [1] https://github.com/apache/arrow-nanoarrow/issues/141
>> > >
>> > > On Wed, Mar 1, 2023 at 7:53 PM Sutou Kouhei <ko...@clear-code.com>
>> wrote:
>> > >
>> > >> -0
>> > >>
>> > >> I ran the following command line on Debian GNU/Linux sid:
>> > >>
>> > >> NANOARROW_CMAKE_OPTIONS=-DCMAKE_PREFIX_PATH=/tmp/local \
>> > >> dev/release/verify-release-candidate.sh 0.1.0 1
>> > >>
>> > >> with:
>> > >>
>> > >> * Apache Arrow C++ main
>> > >> * R version 4.2.2 Patched (2022-11-10 r83330)
>> > >>
>> > >> I got 4 R failures:
>> > >>
>> > >>
>> > >>
>> >
>> https://gist.github.com/kou/1194cf28cb8e70fe309d0f07e6f49b3b#file-testthat-rout-fail
>> > >>
>> > >> I'm not sure whether they are caused by my wrong setup or
>> > >> not. Could someone check the failures?
>> > >>
>> > >> Thanks,
>> > >> --
>> > >> kou
>> > >>
>> > >> In <
>> CAFb7qSfX3jCb6wnxcmpNqJ_iEeY8RXFEE8E+ZF2gudYyJXie7Q@mail.gmail.com>
>> > >> "[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
>> 2023
>> > >> 13:03:44 -0400,
>> > >> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
>> > >>
>> > >> > Hello,
>> > >> >
>> > >> > I would like to propose the following release candidate (RC1) of
>> > Apache
>> > >> > Arrow nanoarrow [0] version 0.1.0. This is an initial release
>> > consisting
>> > >> of
>> > >> > 31 resolved GitHub issues [1].
>> > >> >
>> > >> > Special thanks to David Li for his reviews and support during the
>> > >> > preparation of this initial release candidate!
>> > >> >
>> > >> > This release candidate is based on commit:
>> > >> > 341279af1b2fdede36871d212f339083ffbd75eb [2]
>> > >> >
>> > >> > The source release rc1 is hosted at [3].
>> > >> > The changelog is located at [4].
>> > >> >
>> > >> > Please download, verify checksums and signatures, run the unit
>> tests,
>> > and
>> > >> > vote on the release. See [5] for how to validate a release
>> candidate.
>> > >> >
>> > >> > The vote will be open for at least 72 hours.
>> > >> >
>> > >> > [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
>> > >> > [ ] +0
>> > >> > [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0
>> because...
>> > >> >
>> > >> > [0] https://github.com/apache/arrow-nanoarrow
>> > >> > [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
>> > >> > [2]
>> > >> >
>> > >>
>> >
>> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
>> > >> > [3]
>> > >> >
>> > >>
>> >
>> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
>> > >> > [4]
>> > >> >
>> > >>
>> >
>> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
>> > >> > [5]
>> > >> >
>> > >>
>> >
>> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>> > >>
>> >
>>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Dewey Dunnington <de...@voltrondata.com.INVALID>.
Thank you everybody for verifying and voting! With 4 binding +1s and 5
non-binding +1s, the vote passes!
The first release of Apache Arrow nanoarrow has the following post-release
tasks. I believe the upload step requires a PMC member to run the script
but the rest I'm happy to take care of!
[x] Closed GitHub milestone
[ ] Added release to Apache Reporter System
[ ] Uploaded artifacts to Subversion
[ ] Created GitHub release
[ ] Submit R package to CRAN
[ ] Sent announcement to announce@apache.org
[ ] Release blog post at https://github.com/apache/arrow-site/pull/288
[ ] Removed old artifacts from SVN
[ ] Bumped versions on main
On Thu, Mar 2, 2023 at 11:35 PM Jacob Wujciak <ja...@voltrondata.com.invalid>
wrote:
> +1 (non-binding) verified on manjaro
>
> On Fri, Mar 3, 2023 at 1:37 AM Sutou Kouhei <ko...@clear-code.com> wrote:
>
> > +1
> >
> > This was because I already installed the old 'arrow' R
> > package (8.0.0). I upgraded it to 11.0.0 and it
> > worked. Thanks to Dewey for helping me!
> >
> > Thanks,
> > --
> > kou
> >
> > In <CA...@mail.gmail.com>
> > "Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
> > 2023 22:35:00 -0400,
> > Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
> >
> > > Thank you!
> > >
> > > I've followed up on an issue [1], but I believe the problem is that the
> > > version of the 'arrow' R package that is installed is before 10.0.0
> when
> > > the tested features were added. In the R package DESCRIPTION the
> version
> > > constraint is >= 9.0.0, which should be updated (or those tests should
> be
> > > skipped for old versions of arrow).
> > >
> > > [1] https://github.com/apache/arrow-nanoarrow/issues/141
> > >
> > > On Wed, Mar 1, 2023 at 7:53 PM Sutou Kouhei <ko...@clear-code.com>
> wrote:
> > >
> > >> -0
> > >>
> > >> I ran the following command line on Debian GNU/Linux sid:
> > >>
> > >> NANOARROW_CMAKE_OPTIONS=-DCMAKE_PREFIX_PATH=/tmp/local \
> > >> dev/release/verify-release-candidate.sh 0.1.0 1
> > >>
> > >> with:
> > >>
> > >> * Apache Arrow C++ main
> > >> * R version 4.2.2 Patched (2022-11-10 r83330)
> > >>
> > >> I got 4 R failures:
> > >>
> > >>
> > >>
> >
> https://gist.github.com/kou/1194cf28cb8e70fe309d0f07e6f49b3b#file-testthat-rout-fail
> > >>
> > >> I'm not sure whether they are caused by my wrong setup or
> > >> not. Could someone check the failures?
> > >>
> > >> Thanks,
> > >> --
> > >> kou
> > >>
> > >> In <
> CAFb7qSfX3jCb6wnxcmpNqJ_iEeY8RXFEE8E+ZF2gudYyJXie7Q@mail.gmail.com>
> > >> "[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
> 2023
> > >> 13:03:44 -0400,
> > >> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
> > >>
> > >> > Hello,
> > >> >
> > >> > I would like to propose the following release candidate (RC1) of
> > Apache
> > >> > Arrow nanoarrow [0] version 0.1.0. This is an initial release
> > consisting
> > >> of
> > >> > 31 resolved GitHub issues [1].
> > >> >
> > >> > Special thanks to David Li for his reviews and support during the
> > >> > preparation of this initial release candidate!
> > >> >
> > >> > This release candidate is based on commit:
> > >> > 341279af1b2fdede36871d212f339083ffbd75eb [2]
> > >> >
> > >> > The source release rc1 is hosted at [3].
> > >> > The changelog is located at [4].
> > >> >
> > >> > Please download, verify checksums and signatures, run the unit
> tests,
> > and
> > >> > vote on the release. See [5] for how to validate a release
> candidate.
> > >> >
> > >> > The vote will be open for at least 72 hours.
> > >> >
> > >> > [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> > >> > [ ] +0
> > >> > [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0
> because...
> > >> >
> > >> > [0] https://github.com/apache/arrow-nanoarrow
> > >> > [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> > >> > [2]
> > >> >
> > >>
> >
> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> > >> > [3]
> > >> >
> > >>
> >
> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> > >> > [4]
> > >> >
> > >>
> >
> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> > >> > [5]
> > >> >
> > >>
> >
> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
> > >>
> >
>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Jacob Wujciak <ja...@voltrondata.com.INVALID>.
+1 (non-binding) verified on manjaro
On Fri, Mar 3, 2023 at 1:37 AM Sutou Kouhei <ko...@clear-code.com> wrote:
> +1
>
> This was because I already installed the old 'arrow' R
> package (8.0.0). I upgraded it to 11.0.0 and it
> worked. Thanks to Dewey for helping me!
>
> Thanks,
> --
> kou
>
> In <CA...@mail.gmail.com>
> "Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar
> 2023 22:35:00 -0400,
> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
>
> > Thank you!
> >
> > I've followed up on an issue [1], but I believe the problem is that the
> > version of the 'arrow' R package that is installed is before 10.0.0 when
> > the tested features were added. In the R package DESCRIPTION the version
> > constraint is >= 9.0.0, which should be updated (or those tests should be
> > skipped for old versions of arrow).
> >
> > [1] https://github.com/apache/arrow-nanoarrow/issues/141
> >
> > On Wed, Mar 1, 2023 at 7:53 PM Sutou Kouhei <ko...@clear-code.com> wrote:
> >
> >> -0
> >>
> >> I ran the following command line on Debian GNU/Linux sid:
> >>
> >> NANOARROW_CMAKE_OPTIONS=-DCMAKE_PREFIX_PATH=/tmp/local \
> >> dev/release/verify-release-candidate.sh 0.1.0 1
> >>
> >> with:
> >>
> >> * Apache Arrow C++ main
> >> * R version 4.2.2 Patched (2022-11-10 r83330)
> >>
> >> I got 4 R failures:
> >>
> >>
> >>
> https://gist.github.com/kou/1194cf28cb8e70fe309d0f07e6f49b3b#file-testthat-rout-fail
> >>
> >> I'm not sure whether they are caused by my wrong setup or
> >> not. Could someone check the failures?
> >>
> >> Thanks,
> >> --
> >> kou
> >>
> >> In <CA...@mail.gmail.com>
> >> "[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar 2023
> >> 13:03:44 -0400,
> >> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
> >>
> >> > Hello,
> >> >
> >> > I would like to propose the following release candidate (RC1) of
> Apache
> >> > Arrow nanoarrow [0] version 0.1.0. This is an initial release
> consisting
> >> of
> >> > 31 resolved GitHub issues [1].
> >> >
> >> > Special thanks to David Li for his reviews and support during the
> >> > preparation of this initial release candidate!
> >> >
> >> > This release candidate is based on commit:
> >> > 341279af1b2fdede36871d212f339083ffbd75eb [2]
> >> >
> >> > The source release rc1 is hosted at [3].
> >> > The changelog is located at [4].
> >> >
> >> > Please download, verify checksums and signatures, run the unit tests,
> and
> >> > vote on the release. See [5] for how to validate a release candidate.
> >> >
> >> > The vote will be open for at least 72 hours.
> >> >
> >> > [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> >> > [ ] +0
> >> > [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
> >> >
> >> > [0] https://github.com/apache/arrow-nanoarrow
> >> > [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> >> > [2]
> >> >
> >>
> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> >> > [3]
> >> >
> >>
> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> >> > [4]
> >> >
> >>
> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> >> > [5]
> >> >
> >>
> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
> >>
>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Sutou Kouhei <ko...@clear-code.com>.
+1
This was because I already installed the old 'arrow' R
package (8.0.0). I upgraded it to 11.0.0 and it
worked. Thanks to Dewey for helping me!
Thanks,
--
kou
In <CA...@mail.gmail.com>
"Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar 2023 22:35:00 -0400,
Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
> Thank you!
>
> I've followed up on an issue [1], but I believe the problem is that the
> version of the 'arrow' R package that is installed is before 10.0.0 when
> the tested features were added. In the R package DESCRIPTION the version
> constraint is >= 9.0.0, which should be updated (or those tests should be
> skipped for old versions of arrow).
>
> [1] https://github.com/apache/arrow-nanoarrow/issues/141
>
> On Wed, Mar 1, 2023 at 7:53 PM Sutou Kouhei <ko...@clear-code.com> wrote:
>
>> -0
>>
>> I ran the following command line on Debian GNU/Linux sid:
>>
>> NANOARROW_CMAKE_OPTIONS=-DCMAKE_PREFIX_PATH=/tmp/local \
>> dev/release/verify-release-candidate.sh 0.1.0 1
>>
>> with:
>>
>> * Apache Arrow C++ main
>> * R version 4.2.2 Patched (2022-11-10 r83330)
>>
>> I got 4 R failures:
>>
>>
>> https://gist.github.com/kou/1194cf28cb8e70fe309d0f07e6f49b3b#file-testthat-rout-fail
>>
>> I'm not sure whether they are caused by my wrong setup or
>> not. Could someone check the failures?
>>
>> Thanks,
>> --
>> kou
>>
>> In <CA...@mail.gmail.com>
>> "[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar 2023
>> 13:03:44 -0400,
>> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
>>
>> > Hello,
>> >
>> > I would like to propose the following release candidate (RC1) of Apache
>> > Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting
>> of
>> > 31 resolved GitHub issues [1].
>> >
>> > Special thanks to David Li for his reviews and support during the
>> > preparation of this initial release candidate!
>> >
>> > This release candidate is based on commit:
>> > 341279af1b2fdede36871d212f339083ffbd75eb [2]
>> >
>> > The source release rc1 is hosted at [3].
>> > The changelog is located at [4].
>> >
>> > Please download, verify checksums and signatures, run the unit tests, and
>> > vote on the release. See [5] for how to validate a release candidate.
>> >
>> > The vote will be open for at least 72 hours.
>> >
>> > [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
>> > [ ] +0
>> > [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
>> >
>> > [0] https://github.com/apache/arrow-nanoarrow
>> > [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
>> > [2]
>> >
>> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
>> > [3]
>> >
>> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
>> > [4]
>> >
>> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
>> > [5]
>> >
>> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Dewey Dunnington <de...@voltrondata.com.INVALID>.
Thank you!
I've followed up on an issue [1], but I believe the problem is that the
version of the 'arrow' R package that is installed is before 10.0.0 when
the tested features were added. In the R package DESCRIPTION the version
constraint is >= 9.0.0, which should be updated (or those tests should be
skipped for old versions of arrow).
[1] https://github.com/apache/arrow-nanoarrow/issues/141
On Wed, Mar 1, 2023 at 7:53 PM Sutou Kouhei <ko...@clear-code.com> wrote:
> -0
>
> I ran the following command line on Debian GNU/Linux sid:
>
> NANOARROW_CMAKE_OPTIONS=-DCMAKE_PREFIX_PATH=/tmp/local \
> dev/release/verify-release-candidate.sh 0.1.0 1
>
> with:
>
> * Apache Arrow C++ main
> * R version 4.2.2 Patched (2022-11-10 r83330)
>
> I got 4 R failures:
>
>
> https://gist.github.com/kou/1194cf28cb8e70fe309d0f07e6f49b3b#file-testthat-rout-fail
>
> I'm not sure whether they are caused by my wrong setup or
> not. Could someone check the failures?
>
> Thanks,
> --
> kou
>
> In <CA...@mail.gmail.com>
> "[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar 2023
> 13:03:44 -0400,
> Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
>
> > Hello,
> >
> > I would like to propose the following release candidate (RC1) of Apache
> > Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting
> of
> > 31 resolved GitHub issues [1].
> >
> > Special thanks to David Li for his reviews and support during the
> > preparation of this initial release candidate!
> >
> > This release candidate is based on commit:
> > 341279af1b2fdede36871d212f339083ffbd75eb [2]
> >
> > The source release rc1 is hosted at [3].
> > The changelog is located at [4].
> >
> > Please download, verify checksums and signatures, run the unit tests, and
> > vote on the release. See [5] for how to validate a release candidate.
> >
> > The vote will be open for at least 72 hours.
> >
> > [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> > [ ] +0
> > [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
> >
> > [0] https://github.com/apache/arrow-nanoarrow
> > [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> > [2]
> >
> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> > [3]
> >
> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> > [4]
> >
> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> > [5]
> >
> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Sutou Kouhei <ko...@clear-code.com>.
-0
I ran the following command line on Debian GNU/Linux sid:
NANOARROW_CMAKE_OPTIONS=-DCMAKE_PREFIX_PATH=/tmp/local \
dev/release/verify-release-candidate.sh 0.1.0 1
with:
* Apache Arrow C++ main
* R version 4.2.2 Patched (2022-11-10 r83330)
I got 4 R failures:
https://gist.github.com/kou/1194cf28cb8e70fe309d0f07e6f49b3b#file-testthat-rout-fail
I'm not sure whether they are caused by my wrong setup or
not. Could someone check the failures?
Thanks,
--
kou
In <CA...@mail.gmail.com>
"[VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1" on Wed, 1 Mar 2023 13:03:44 -0400,
Dewey Dunnington <de...@voltrondata.com.INVALID> wrote:
> Hello,
>
> I would like to propose the following release candidate (RC1) of Apache
> Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting of
> 31 resolved GitHub issues [1].
>
> Special thanks to David Li for his reviews and support during the
> preparation of this initial release candidate!
>
> This release candidate is based on commit:
> 341279af1b2fdede36871d212f339083ffbd75eb [2]
>
> The source release rc1 is hosted at [3].
> The changelog is located at [4].
>
> Please download, verify checksums and signatures, run the unit tests, and
> vote on the release. See [5] for how to validate a release candidate.
>
> The vote will be open for at least 72 hours.
>
> [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> [ ] +0
> [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
>
> [0] https://github.com/apache/arrow-nanoarrow
> [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> [2]
> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> [3]
> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> [4]
> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> [5]
> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Nic Crane <th...@gmail.com>.
+1 (binding)
Verified on Ubuntu 22.04
On Thu, 2 Mar 2023 at 12:19, SHIMA Tatsuya <ts...@gmail.com> wrote:
> +1 (non-binding)
>
> Verified on Ubuntu 22.04 (amd64).
>
> I used R 4.2.2 installed from source.
>
> On 2023/03/02 20:39, Joris Van den Bossche wrote:
> > +1 (binding)
> >
> > Verified on Ubuntu 20.04
> >
> > It worked with conda R for me, I only needed to ensure to install a
> > conda compiler to get it building
> > (https://github.com/apache/arrow-nanoarrow/pull/142)
> >
> > On Thu, 2 Mar 2023 at 05:29, Jin Shang <sh...@gmail.com> wrote:
> >> +1 (non-binding). Verified on macOS 12.5 aarch64 and Ubuntu 22.04
> aarch64.
> >> Dependencies were installed via homebrew and apt. Everything went
> smoothly.
> >>
> >> On Thu, Mar 2, 2023 at 1:04 AM Dewey Dunnington
> >> <de...@voltrondata.com.invalid> wrote:
> >>
> >>> Hello,
> >>>
> >>> I would like to propose the following release candidate (RC1) of Apache
> >>> Arrow nanoarrow [0] version 0.1.0. This is an initial release
> consisting of
> >>> 31 resolved GitHub issues [1].
> >>>
> >>> Special thanks to David Li for his reviews and support during the
> >>> preparation of this initial release candidate!
> >>>
> >>> This release candidate is based on commit:
> >>> 341279af1b2fdede36871d212f339083ffbd75eb [2]
> >>>
> >>> The source release rc1 is hosted at [3].
> >>> The changelog is located at [4].
> >>>
> >>> Please download, verify checksums and signatures, run the unit tests,
> and
> >>> vote on the release. See [5] for how to validate a release candidate.
> >>>
> >>> The vote will be open for at least 72 hours.
> >>>
> >>> [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> >>> [ ] +0
> >>> [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
> >>>
> >>> [0] https://github.com/apache/arrow-nanoarrow
> >>> [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> >>> [2]
> >>>
> >>>
> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> >>> [3]
> >>>
> >>>
> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> >>> [4]
> >>>
> >>>
> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> >>> [5]
> >>>
> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
> >>>
>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by SHIMA Tatsuya <ts...@gmail.com>.
+1 (non-binding)
Verified on Ubuntu 22.04 (amd64).
I used R 4.2.2 installed from source.
On 2023/03/02 20:39, Joris Van den Bossche wrote:
> +1 (binding)
>
> Verified on Ubuntu 20.04
>
> It worked with conda R for me, I only needed to ensure to install a
> conda compiler to get it building
> (https://github.com/apache/arrow-nanoarrow/pull/142)
>
> On Thu, 2 Mar 2023 at 05:29, Jin Shang <sh...@gmail.com> wrote:
>> +1 (non-binding). Verified on macOS 12.5 aarch64 and Ubuntu 22.04 aarch64.
>> Dependencies were installed via homebrew and apt. Everything went smoothly.
>>
>> On Thu, Mar 2, 2023 at 1:04 AM Dewey Dunnington
>> <de...@voltrondata.com.invalid> wrote:
>>
>>> Hello,
>>>
>>> I would like to propose the following release candidate (RC1) of Apache
>>> Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting of
>>> 31 resolved GitHub issues [1].
>>>
>>> Special thanks to David Li for his reviews and support during the
>>> preparation of this initial release candidate!
>>>
>>> This release candidate is based on commit:
>>> 341279af1b2fdede36871d212f339083ffbd75eb [2]
>>>
>>> The source release rc1 is hosted at [3].
>>> The changelog is located at [4].
>>>
>>> Please download, verify checksums and signatures, run the unit tests, and
>>> vote on the release. See [5] for how to validate a release candidate.
>>>
>>> The vote will be open for at least 72 hours.
>>>
>>> [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
>>> [ ] +0
>>> [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
>>>
>>> [0] https://github.com/apache/arrow-nanoarrow
>>> [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
>>> [2]
>>>
>>> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
>>> [3]
>>>
>>> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
>>> [4]
>>>
>>> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
>>> [5]
>>> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>>>
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Joris Van den Bossche <jo...@gmail.com>.
+1 (binding)
Verified on Ubuntu 20.04
It worked with conda R for me, I only needed to ensure to install a
conda compiler to get it building
(https://github.com/apache/arrow-nanoarrow/pull/142)
On Thu, 2 Mar 2023 at 05:29, Jin Shang <sh...@gmail.com> wrote:
>
> +1 (non-binding). Verified on macOS 12.5 aarch64 and Ubuntu 22.04 aarch64.
> Dependencies were installed via homebrew and apt. Everything went smoothly.
>
> On Thu, Mar 2, 2023 at 1:04 AM Dewey Dunnington
> <de...@voltrondata.com.invalid> wrote:
>
> > Hello,
> >
> > I would like to propose the following release candidate (RC1) of Apache
> > Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting of
> > 31 resolved GitHub issues [1].
> >
> > Special thanks to David Li for his reviews and support during the
> > preparation of this initial release candidate!
> >
> > This release candidate is based on commit:
> > 341279af1b2fdede36871d212f339083ffbd75eb [2]
> >
> > The source release rc1 is hosted at [3].
> > The changelog is located at [4].
> >
> > Please download, verify checksums and signatures, run the unit tests, and
> > vote on the release. See [5] for how to validate a release candidate.
> >
> > The vote will be open for at least 72 hours.
> >
> > [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> > [ ] +0
> > [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
> >
> > [0] https://github.com/apache/arrow-nanoarrow
> > [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> > [2]
> >
> > https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> > [3]
> >
> > https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> > [4]
> >
> > https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> > [5]
> > https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
> >
Re: [VOTE] Release Apache Arrow nanoarrow 0.1.0 - RC1
Posted by Jin Shang <sh...@gmail.com>.
+1 (non-binding). Verified on macOS 12.5 aarch64 and Ubuntu 22.04 aarch64.
Dependencies were installed via homebrew and apt. Everything went smoothly.
On Thu, Mar 2, 2023 at 1:04 AM Dewey Dunnington
<de...@voltrondata.com.invalid> wrote:
> Hello,
>
> I would like to propose the following release candidate (RC1) of Apache
> Arrow nanoarrow [0] version 0.1.0. This is an initial release consisting of
> 31 resolved GitHub issues [1].
>
> Special thanks to David Li for his reviews and support during the
> preparation of this initial release candidate!
>
> This release candidate is based on commit:
> 341279af1b2fdede36871d212f339083ffbd75eb [2]
>
> The source release rc1 is hosted at [3].
> The changelog is located at [4].
>
> Please download, verify checksums and signatures, run the unit tests, and
> vote on the release. See [5] for how to validate a release candidate.
>
> The vote will be open for at least 72 hours.
>
> [ ] +1 Release this as Apache Arrow nanoarrow 0.1.0
> [ ] +0
> [ ] -1 Do not release this as Apache Arrow nanoarrow 0.1.0 because...
>
> [0] https://github.com/apache/arrow-nanoarrow
> [1] https://github.com/apache/arrow-nanoarrow/milestone/1?closed=1
> [2]
>
> https://github.com/apache/arrow-nanoarrow/tree/apache-arrow-nanoarrow-0.1.0-rc1
> [3]
>
> https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-nanoarrow-0.1.0-rc1/
> [4]
>
> https://github.com/apache/arrow-nanoarrow/blob/apache-arrow-nanoarrow-0.1.0-rc1/CHANGELOG.md
> [5]
> https://github.com/apache/arrow-nanoarrow/blob/main/dev/release/README.md
>