You are viewing a plain text version of this content. The canonical link for it is here.
Posted to general@incubator.apache.org by Ali Lown <al...@apache.org> on 2013/06/16 00:24:32 UTC

[VOTE] Release Apache Wave 0.4 based on RC3

The Wave community has voted on and approved the proposal to release
Apache Wave 0.4 (incubating) based on RC3.

This will be the initial incubator release for Wave.

The proposal for release can be found at:
https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVd6n5_LLWUUfaEkY4kzLDUmd-txyadkMqWKmTfbWTGkSA@mail.gmail.com%3E

The result from the wave-dev vote can be found at:
https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E

Wave 0.4 RC3 artefacts are available at:
https://people.apache.org/~al/wave_rc/0.4-rc3/
Note: The checksums are SHA-512's

This is a build from the subversion tag wave-0.4-rc3 at:
https://svn.apache.org/repos/asf/incubator/wave/tags/

A summary about the project and other information can be found in the
RELEASE-NOTES at:
https://people.apache.org/~al/wave_rc/0.4-rc3/RELEASE-NOTES
and is included in the tarballs.

Votes, please. This vote will close at 0000 GMT 19-June 2013.

[  ] +1   Release these artefacts
[  ] +0   OK, but...
[  ] -0    OK, but really should fix...
[  ] -1    I oppose this release because...

Thanks.
Ali

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


[CANCEL][VOTE] Release Apache Wave 0.4 based on RC3

Posted by Ali Lown <al...@apache.org>.
Clean this up from the voting monitor.
This has been superseded by RC4 at the project level anyway...

Sorry for leaving it open for so long. (I may have forgotten it)

Ali

On 15 June 2013 23:24, Ali Lown <al...@apache.org> wrote:
> The Wave community has voted on and approved the proposal to release
> Apache Wave 0.4 (incubating) based on RC3.
>
> This will be the initial incubator release for Wave.
>
> The proposal for release can be found at:
> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVd6n5_LLWUUfaEkY4kzLDUmd-txyadkMqWKmTfbWTGkSA@mail.gmail.com%3E
>
> The result from the wave-dev vote can be found at:
> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
>
> Wave 0.4 RC3 artefacts are available at:
> https://people.apache.org/~al/wave_rc/0.4-rc3/
> Note: The checksums are SHA-512's
>
> This is a build from the subversion tag wave-0.4-rc3 at:
> https://svn.apache.org/repos/asf/incubator/wave/tags/
>
> A summary about the project and other information can be found in the
> RELEASE-NOTES at:
> https://people.apache.org/~al/wave_rc/0.4-rc3/RELEASE-NOTES
> and is included in the tarballs.
>
> Votes, please. This vote will close at 0000 GMT 19-June 2013.
>
> [  ] +1   Release these artefacts
> [  ] +0   OK, but...
> [  ] -0    OK, but really should fix...
> [  ] -1    I oppose this release because...
>
> Thanks.
> Ali

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by David Nalley <da...@gnsa.us>.
On Thu, Jun 20, 2013 at 8:14 PM, Michael MacFadden
<mi...@gmail.com> wrote:
> Joe,
>
> Thanks for your comments. Can you clarify for us the PPMC comment. I think we are a bit confused between the concepts of a top level project PMC, the incubator IPMC, the PPMC you have mentioned, and piddling mentors. I don't think we had ever discussed nominating a PPMC assuming that first p stands for podling.
>
> I think we were under the inkers soon that the mentors were the management committe for the podling. Is there a good document on this somewhere?
>
> ~Michael

See http://incubator.apache.org/guides/ppmc.html for more.

--David

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by Upayavira <uv...@odoko.co.uk>.
Committer = can change the code
PMC = project management committee
iPMC = incubator project management committee
PPMC = podlings project management committee

Only PMC members votes are binding. In the case of a podling, only
incubator PMC votes are binding. However, as you can consider the PPMC
as a PMC in training, their votes are considered important.

In Wave so far, all committers are also PPMC members, so Ali could have
just labelled folks 'PPMC' instead of 'committer' and Joe's concern
would have been addressed.

Upayavira


On Fri, Jun 21, 2013, at 01:14 AM, Michael MacFadden wrote:
> Joe,
> 
> Thanks for your comments. Can you clarify for us the PPMC comment. I
> think we are a bit confused between the concepts of a top level project
> PMC, the incubator IPMC, the PPMC you have mentioned, and piddling
> mentors. I don't think we had ever discussed nominating a PPMC assuming
> that first p stands for podling. 
> 
> I think we were under the inkers soon that the mentors were the
> management committe for the podling. Is there a good document on this
> somewhere?
> 
> ~Michael
> 
> On Jun 20, 2013, at 5:01 PM, Joe Brockmeier <jz...@zonker.net> wrote:
> 
> > I should have added: please do address the problems here and re-roll and
> > I will be sure to examine that release in a timely fashion. Don't let a
> > -1 discourage you, as most incubating projects have to go through a
> > learning curve. 
> > 
> > On Thu, Jun 20, 2013, at 06:59 PM, Joe Brockmeier wrote:
> >> Hi Ali, 
> >> 
> >> Comments inline. 
> >> 
> >> On Sat, Jun 15, 2013, at 05:24 PM, Ali Lown wrote:
> >> 
> >>> The result from the wave-dev vote can be found at:
> >>> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
> >> 
> >> I find this slightly confusing as I expected at least 3 PPMC votes, but
> >> I guess Wave has opted for the committer == PPMC model? 
> >> 
> >>> Wave 0.4 RC3 artefacts are available at:
> >>> https://people.apache.org/~al/wave_rc/0.4-rc3/
> >>> Note: The checksums are SHA-512's
> >> 
> >> A couple of things:
> >> 
> >> - Preferably, you'd only include *one* set of artifacts to vote on. Am I
> >> voting on the zip, the bz2? I'm uncomfortable voting without checking
> >> out all the source releases as I have no way of knowing that the zip ==
> >> the bz2 release without inspecting both.
> >> 
> >> - Preferably, there'd be no binary release in the artifacts you're
> >> asking to have voted on. Convenience binaries are fine, but they're not
> >> an official release, so it'd be better not to include them with the
> >> files we're meant to be voting on. 
> >> 
> >> - I have to -1 this as there are several binary (.jar) files included in
> >> the release that don't belong in a source release. (under
> >> third_party/codegen/*) 
> >> 
> >> Best,
> >> 
> >> jzb
> >> -- 
> >> Joe Brockmeier
> >> jzb@zonker.net
> >> Twitter: @jzb
> >> http://www.dissociatedpress.net/
> > 
> > 
> > Best,
> > 
> > jzb
> > -- 
> > Joe Brockmeier
> > jzb@zonker.net
> > Twitter: @jzb
> > http://www.dissociatedpress.net/
> > 
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> > For additional commands, e-mail: general-help@incubator.apache.org
> > 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> For additional commands, e-mail: general-help@incubator.apache.org
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by Michael MacFadden <mi...@gmail.com>.
Joe,

Thanks for your comments. Can you clarify for us the PPMC comment. I think we are a bit confused between the concepts of a top level project PMC, the incubator IPMC, the PPMC you have mentioned, and piddling mentors. I don't think we had ever discussed nominating a PPMC assuming that first p stands for podling. 

I think we were under the inkers soon that the mentors were the management committe for the podling. Is there a good document on this somewhere?

~Michael

On Jun 20, 2013, at 5:01 PM, Joe Brockmeier <jz...@zonker.net> wrote:

> I should have added: please do address the problems here and re-roll and
> I will be sure to examine that release in a timely fashion. Don't let a
> -1 discourage you, as most incubating projects have to go through a
> learning curve. 
> 
> On Thu, Jun 20, 2013, at 06:59 PM, Joe Brockmeier wrote:
>> Hi Ali, 
>> 
>> Comments inline. 
>> 
>> On Sat, Jun 15, 2013, at 05:24 PM, Ali Lown wrote:
>> 
>>> The result from the wave-dev vote can be found at:
>>> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
>> 
>> I find this slightly confusing as I expected at least 3 PPMC votes, but
>> I guess Wave has opted for the committer == PPMC model? 
>> 
>>> Wave 0.4 RC3 artefacts are available at:
>>> https://people.apache.org/~al/wave_rc/0.4-rc3/
>>> Note: The checksums are SHA-512's
>> 
>> A couple of things:
>> 
>> - Preferably, you'd only include *one* set of artifacts to vote on. Am I
>> voting on the zip, the bz2? I'm uncomfortable voting without checking
>> out all the source releases as I have no way of knowing that the zip ==
>> the bz2 release without inspecting both.
>> 
>> - Preferably, there'd be no binary release in the artifacts you're
>> asking to have voted on. Convenience binaries are fine, but they're not
>> an official release, so it'd be better not to include them with the
>> files we're meant to be voting on. 
>> 
>> - I have to -1 this as there are several binary (.jar) files included in
>> the release that don't belong in a source release. (under
>> third_party/codegen/*) 
>> 
>> Best,
>> 
>> jzb
>> -- 
>> Joe Brockmeier
>> jzb@zonker.net
>> Twitter: @jzb
>> http://www.dissociatedpress.net/
> 
> 
> Best,
> 
> jzb
> -- 
> Joe Brockmeier
> jzb@zonker.net
> Twitter: @jzb
> http://www.dissociatedpress.net/
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> For additional commands, e-mail: general-help@incubator.apache.org
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by Joe Brockmeier <jz...@zonker.net>.
I should have added: please do address the problems here and re-roll and
I will be sure to examine that release in a timely fashion. Don't let a
-1 discourage you, as most incubating projects have to go through a
learning curve. 

On Thu, Jun 20, 2013, at 06:59 PM, Joe Brockmeier wrote:
> Hi Ali, 
> 
> Comments inline. 
> 
> On Sat, Jun 15, 2013, at 05:24 PM, Ali Lown wrote:
> 
> > The result from the wave-dev vote can be found at:
> > https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
> 
> I find this slightly confusing as I expected at least 3 PPMC votes, but
> I guess Wave has opted for the committer == PPMC model? 
> 
> > Wave 0.4 RC3 artefacts are available at:
> > https://people.apache.org/~al/wave_rc/0.4-rc3/
> > Note: The checksums are SHA-512's
> 
> A couple of things:
> 
> - Preferably, you'd only include *one* set of artifacts to vote on. Am I
> voting on the zip, the bz2? I'm uncomfortable voting without checking
> out all the source releases as I have no way of knowing that the zip ==
> the bz2 release without inspecting both.
> 
> - Preferably, there'd be no binary release in the artifacts you're
> asking to have voted on. Convenience binaries are fine, but they're not
> an official release, so it'd be better not to include them with the
> files we're meant to be voting on. 
> 
> - I have to -1 this as there are several binary (.jar) files included in
> the release that don't belong in a source release. (under
> third_party/codegen/*) 
> 
> Best,
> 
> jzb
> -- 
> Joe Brockmeier
> jzb@zonker.net
> Twitter: @jzb
> http://www.dissociatedpress.net/


Best,

jzb
-- 
Joe Brockmeier
jzb@zonker.net
Twitter: @jzb
http://www.dissociatedpress.net/

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by sebb <se...@gmail.com>.
On 21 June 2013 00:59, Joe Brockmeier <jz...@zonker.net> wrote:
> Hi Ali,
>
> Comments inline.
>
> On Sat, Jun 15, 2013, at 05:24 PM, Ali Lown wrote:
>
>> The result from the wave-dev vote can be found at:
>> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
>
> I find this slightly confusing as I expected at least 3 PPMC votes, but
> I guess Wave has opted for the committer == PPMC model?
>
>> Wave 0.4 RC3 artefacts are available at:
>> https://people.apache.org/~al/wave_rc/0.4-rc3/
>> Note: The checksums are SHA-512's
>
> A couple of things:
>
> - Preferably, you'd only include *one* set of artifacts to vote on.
> Am I voting on the zip, the bz2?

If the source is to be release in multiple archive formats, then they
must all be voted on.
Only source that has passed the vote may be released.

> I'm uncomfortable voting without checking
> out all the source releases as I have no way of knowing that the zip ==
> the bz2 release without inspecting both.

That is part of the release checking process, tedious though it is.

There is a Perl script that can be used to compare directory structures:

https://svn.apache.org/repos/private/committers/tools/releases/compare_dirs.pl

> - Preferably, there'd be no binary release in the artifacts you're
> asking to have voted on. Convenience binaries are fine, but they're not
> an official release, so it'd be better not to include them with the
> files we're meant to be voting on.

I disagree here - if a project releases binaries, it's important that
these are reviewed to check that the contents look OK.
For example, LICENSE and NOTICE files appropriate to the contents,
DISCLAIMER file for Incubator releases etc.

> - I have to -1 this as there are several binary (.jar) files included in
> the release that don't belong in a source release. (under
> third_party/codegen/*)

I agree here.

> Best,
>
> jzb
> --
> Joe Brockmeier
> jzb@zonker.net
> Twitter: @jzb
> http://www.dissociatedpress.net/
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> For additional commands, e-mail: general-help@incubator.apache.org
>

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by Joe Brockmeier <jz...@zonker.net>.
Hi Ali, 

Comments inline. 

On Sat, Jun 15, 2013, at 05:24 PM, Ali Lown wrote:

> The result from the wave-dev vote can be found at:
> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E

I find this slightly confusing as I expected at least 3 PPMC votes, but
I guess Wave has opted for the committer == PPMC model? 

> Wave 0.4 RC3 artefacts are available at:
> https://people.apache.org/~al/wave_rc/0.4-rc3/
> Note: The checksums are SHA-512's

A couple of things:

- Preferably, you'd only include *one* set of artifacts to vote on. Am I
voting on the zip, the bz2? I'm uncomfortable voting without checking
out all the source releases as I have no way of knowing that the zip ==
the bz2 release without inspecting both.

- Preferably, there'd be no binary release in the artifacts you're
asking to have voted on. Convenience binaries are fine, but they're not
an official release, so it'd be better not to include them with the
files we're meant to be voting on. 

- I have to -1 this as there are several binary (.jar) files included in
the release that don't belong in a source release. (under
third_party/codegen/*) 

Best,

jzb
-- 
Joe Brockmeier
jzb@zonker.net
Twitter: @jzb
http://www.dissociatedpress.net/

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by Craig L Russell <cr...@oracle.com>.
Just one quick question. I notice that you include the bouncy-castle jar in the distribution. 

Have you looked into the need to file an ECCN for crypto?

Regards,

Craig

On Jun 20, 2013, at 5:00 PM, David Nalley wrote:

> On Sat, Jun 15, 2013 at 6:24 PM, Ali Lown <al...@apache.org> wrote:
>> The Wave community has voted on and approved the proposal to release
>> Apache Wave 0.4 (incubating) based on RC3.
>> 
>> This will be the initial incubator release for Wave.
>> 
>> The proposal for release can be found at:
>> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVd6n5_LLWUUfaEkY4kzLDUmd-txyadkMqWKmTfbWTGkSA@mail.gmail.com%3E
>> 
>> The result from the wave-dev vote can be found at:
>> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
>> 
>> Wave 0.4 RC3 artefacts are available at:
>> https://people.apache.org/~al/wave_rc/0.4-rc3/
>> Note: The checksums are SHA-512's
>> 
>> This is a build from the subversion tag wave-0.4-rc3 at:
>> https://svn.apache.org/repos/asf/incubator/wave/tags/
>> 
>> A summary about the project and other information can be found in the
>> RELEASE-NOTES at:
>> https://people.apache.org/~al/wave_rc/0.4-rc3/RELEASE-NOTES
>> and is included in the tarballs.
>> 
>> Votes, please. This vote will close at 0000 GMT 19-June 2013.
>> 
>> [  ] +1   Release these artefacts
>> [  ] +0   OK, but...
>> [  ] -0    OK, but really should fix...
>> [  ] -1    I oppose this release because...
>> 
>> Thanks.
>> Ali
>> 
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
>> For additional commands, e-mail: general-help@incubator.apache.org
>> 
> 
> So I spent a little bit of time looking through this, and am confused.
> 
> There are a ton of jar files (read that as binaries) in the source
> release. Specifically:
> ./third_party/codegen/antlr/antlr-3.2.jar
> ./third_party/codegen/gwt/gwt-dev.jar
> ./third_party/codegen/gwt/gwt-user.jar
> ./third_party/codegen/socketio/socketio-gwt-0.1-SNAPSHOT-sources.jar
> ./third_party/codegen/socketio/socketio-gwt-0.1-SNAPSHOT.jar
> ./third_party/codegen/velocity/velocity-1.6.3-dep.jar
> ./third_party/codegen/velocity/velocity-1.6.3.jar
> ./third_party/runtime/aopalliance/aopalliance.jar
> ./third_party/runtime/bouncycastle/bcprov-jdk16-145.jar
> ./third_party/runtime/commons-fileupload/commons-fileupload.jar
> ./third_party/runtime/commons_cli/commons-cli-1.2.jar
> ./third_party/runtime/commons_codec/commons-codec-1.4-sources.jar
> ./third_party/runtime/commons_codec/commons-codec-1.4.jar
> ./third_party/runtime/commons_collections/commons-collections-3.2.1.jar
> ./third_party/runtime/commons_configuration/commons-configuration-1.6.jar
> ./third_party/runtime/commons_httpclient/commons-httpclient-3.1.jar
> ./third_party/runtime/commons_lang/commons-lang-2.5.jar
> ./third_party/runtime/commons_logging/commons-logging-1.1.1-sources.jar
> ./third_party/runtime/commons_logging/commons-logging-1.1.1.jar
> ./third_party/runtime/commons_logging/commons-logging-adapters-1.1.1.jar
> ./third_party/runtime/commons_logging/commons-logging-api-1.1.1.jar
> ./third_party/runtime/dom4j/dom4j-1.6.1.jar
> ./third_party/runtime/gson/gson-1.4.jar
> ./third_party/runtime/guava/guava-r09-gwt.jar
> ./third_party/runtime/guava/guava-r09.jar
> ./third_party/runtime/guice/guice-3.0.jar
> ./third_party/runtime/guice/guice-assistedinject-3.0.jar
> ./third_party/runtime/guice/guice-servlet-3.0.jar
> ./third_party/runtime/guice/javax.inject.jar
> ./third_party/runtime/gxp/gxp-0.2.4-beta.jar
> ./third_party/runtime/jackson/jackson-core-asl-1.5.2.jar
> ./third_party/runtime/jdo/jdo2-api-2.2.jar
> ./third_party/runtime/jdom/jdom.jar
> ./third_party/runtime/jetty/jetty-client-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-continuation-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-http-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-io-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-security-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-server-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-servlet-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-servlets-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-util-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-webapp-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-websocket-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/jetty-xml-8.1.1.v20120215.jar
> ./third_party/runtime/jetty/servlet-api-3.0.jar
> ./third_party/runtime/jline/jline-0.9.94.jar
> ./third_party/runtime/joda_time/joda-time-1.6.jar
> ./third_party/runtime/jsr305/jsr305-src.jar
> ./third_party/runtime/jsr305/jsr305.jar
> ./third_party/runtime/libidn/libidn-1.15.jar
> ./third_party/runtime/libidn/libidn-1.26.jar
> ./third_party/runtime/lucene/lucene-core-3.5.0-javadoc.jar
> ./third_party/runtime/lucene/lucene-core-3.5.0.jar
> ./third_party/runtime/mongo-driver/mongo-2.1.jar
> ./third_party/runtime/oauth/oauth-common-src.jar
> ./third_party/runtime/oauth/oauth-common.jar
> ./third_party/runtime/oauth/oauth-consumer-src.jar
> ./third_party/runtime/oauth/oauth-consumer.jar
> ./third_party/runtime/oauth/oauth-provider-src.jar
> ./third_party/runtime/oauth/oauth-provider.jar
> ./third_party/runtime/protobuf/protobuf-2.3.0-src.jar
> ./third_party/runtime/protobuf/protobuf-java-2.3.0.jar
> ./third_party/runtime/protobuf-format-java/protobuf-format-java-1.1.jar
> ./third_party/runtime/socketio/socketio-core-0.1-SNAPSHOT-sources.jar
> ./third_party/runtime/socketio/socketio-core-0.1-SNAPSHOT.jar
> ./third_party/runtime/socketio/socketio-jetty-0.1-SNAPSHOT-sources.jar
> ./third_party/runtime/socketio/socketio-jetty-0.1-SNAPSHOT.jar
> ./third_party/runtime/websocket/websocket.jar
> ./third_party/runtime/whack/whack.jar
> ./third_party/runtime/whack/xmpp.jar
> ./third_party/runtime/xpp3/xpp3-1.1.4c.jar
> ./third_party/runtime/xpp3/xpp3_xpath-1.1.4c.jar
> ./third_party/test/ant-junit/ant-junit.jar
> ./third_party/test/asm/asm-3.2.jar
> ./third_party/test/cglib/cglib-2.2.jar
> ./third_party/test/hamcrest/hamcrest-all-1.2.jar
> ./third_party/test/jmock/jmock-2.5.1.jar
> ./third_party/test/jmock/jmock-junit3-2.5.1.jar
> ./third_party/test/mockito/mockito-all-1.8.2.jar
> 
> 
> A number of the files do not have the correct/appropriate source header from:
> http://www.apache.org/legal/src-headers.html
> Specifically all of the python files under src/python/api, and a
> number of files with incorrect headers in the root of the archive.
> 
> 
> The NOTICE file doesn't appear complete, but it's lack of completeness
> appears to be from the binaries, so I won't dig into that.
> 
> Sorry I have to vote -1 (binding).
> 
> --David
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> For additional commands, e-mail: general-help@incubator.apache.org
> 

Craig L Russell
Architect, Oracle
http://db.apache.org/jdo
408 276-5638 mailto:Craig.Russell@oracle.com
P.S. A good JDO? O, Gasp!


---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by David Nalley <da...@gnsa.us>.
On Sat, Jun 15, 2013 at 6:24 PM, Ali Lown <al...@apache.org> wrote:
> The Wave community has voted on and approved the proposal to release
> Apache Wave 0.4 (incubating) based on RC3.
>
> This will be the initial incubator release for Wave.
>
> The proposal for release can be found at:
> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVd6n5_LLWUUfaEkY4kzLDUmd-txyadkMqWKmTfbWTGkSA@mail.gmail.com%3E
>
> The result from the wave-dev vote can be found at:
> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
>
> Wave 0.4 RC3 artefacts are available at:
> https://people.apache.org/~al/wave_rc/0.4-rc3/
> Note: The checksums are SHA-512's
>
> This is a build from the subversion tag wave-0.4-rc3 at:
> https://svn.apache.org/repos/asf/incubator/wave/tags/
>
> A summary about the project and other information can be found in the
> RELEASE-NOTES at:
> https://people.apache.org/~al/wave_rc/0.4-rc3/RELEASE-NOTES
> and is included in the tarballs.
>
> Votes, please. This vote will close at 0000 GMT 19-June 2013.
>
> [  ] +1   Release these artefacts
> [  ] +0   OK, but...
> [  ] -0    OK, but really should fix...
> [  ] -1    I oppose this release because...
>
> Thanks.
> Ali
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> For additional commands, e-mail: general-help@incubator.apache.org
>

So I spent a little bit of time looking through this, and am confused.

There are a ton of jar files (read that as binaries) in the source
release. Specifically:
./third_party/codegen/antlr/antlr-3.2.jar
./third_party/codegen/gwt/gwt-dev.jar
./third_party/codegen/gwt/gwt-user.jar
./third_party/codegen/socketio/socketio-gwt-0.1-SNAPSHOT-sources.jar
./third_party/codegen/socketio/socketio-gwt-0.1-SNAPSHOT.jar
./third_party/codegen/velocity/velocity-1.6.3-dep.jar
./third_party/codegen/velocity/velocity-1.6.3.jar
./third_party/runtime/aopalliance/aopalliance.jar
./third_party/runtime/bouncycastle/bcprov-jdk16-145.jar
./third_party/runtime/commons-fileupload/commons-fileupload.jar
./third_party/runtime/commons_cli/commons-cli-1.2.jar
./third_party/runtime/commons_codec/commons-codec-1.4-sources.jar
./third_party/runtime/commons_codec/commons-codec-1.4.jar
./third_party/runtime/commons_collections/commons-collections-3.2.1.jar
./third_party/runtime/commons_configuration/commons-configuration-1.6.jar
./third_party/runtime/commons_httpclient/commons-httpclient-3.1.jar
./third_party/runtime/commons_lang/commons-lang-2.5.jar
./third_party/runtime/commons_logging/commons-logging-1.1.1-sources.jar
./third_party/runtime/commons_logging/commons-logging-1.1.1.jar
./third_party/runtime/commons_logging/commons-logging-adapters-1.1.1.jar
./third_party/runtime/commons_logging/commons-logging-api-1.1.1.jar
./third_party/runtime/dom4j/dom4j-1.6.1.jar
./third_party/runtime/gson/gson-1.4.jar
./third_party/runtime/guava/guava-r09-gwt.jar
./third_party/runtime/guava/guava-r09.jar
./third_party/runtime/guice/guice-3.0.jar
./third_party/runtime/guice/guice-assistedinject-3.0.jar
./third_party/runtime/guice/guice-servlet-3.0.jar
./third_party/runtime/guice/javax.inject.jar
./third_party/runtime/gxp/gxp-0.2.4-beta.jar
./third_party/runtime/jackson/jackson-core-asl-1.5.2.jar
./third_party/runtime/jdo/jdo2-api-2.2.jar
./third_party/runtime/jdom/jdom.jar
./third_party/runtime/jetty/jetty-client-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-continuation-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-http-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-io-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-security-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-server-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-servlet-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-servlets-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-util-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-webapp-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-websocket-8.1.1.v20120215.jar
./third_party/runtime/jetty/jetty-xml-8.1.1.v20120215.jar
./third_party/runtime/jetty/servlet-api-3.0.jar
./third_party/runtime/jline/jline-0.9.94.jar
./third_party/runtime/joda_time/joda-time-1.6.jar
./third_party/runtime/jsr305/jsr305-src.jar
./third_party/runtime/jsr305/jsr305.jar
./third_party/runtime/libidn/libidn-1.15.jar
./third_party/runtime/libidn/libidn-1.26.jar
./third_party/runtime/lucene/lucene-core-3.5.0-javadoc.jar
./third_party/runtime/lucene/lucene-core-3.5.0.jar
./third_party/runtime/mongo-driver/mongo-2.1.jar
./third_party/runtime/oauth/oauth-common-src.jar
./third_party/runtime/oauth/oauth-common.jar
./third_party/runtime/oauth/oauth-consumer-src.jar
./third_party/runtime/oauth/oauth-consumer.jar
./third_party/runtime/oauth/oauth-provider-src.jar
./third_party/runtime/oauth/oauth-provider.jar
./third_party/runtime/protobuf/protobuf-2.3.0-src.jar
./third_party/runtime/protobuf/protobuf-java-2.3.0.jar
./third_party/runtime/protobuf-format-java/protobuf-format-java-1.1.jar
./third_party/runtime/socketio/socketio-core-0.1-SNAPSHOT-sources.jar
./third_party/runtime/socketio/socketio-core-0.1-SNAPSHOT.jar
./third_party/runtime/socketio/socketio-jetty-0.1-SNAPSHOT-sources.jar
./third_party/runtime/socketio/socketio-jetty-0.1-SNAPSHOT.jar
./third_party/runtime/websocket/websocket.jar
./third_party/runtime/whack/whack.jar
./third_party/runtime/whack/xmpp.jar
./third_party/runtime/xpp3/xpp3-1.1.4c.jar
./third_party/runtime/xpp3/xpp3_xpath-1.1.4c.jar
./third_party/test/ant-junit/ant-junit.jar
./third_party/test/asm/asm-3.2.jar
./third_party/test/cglib/cglib-2.2.jar
./third_party/test/hamcrest/hamcrest-all-1.2.jar
./third_party/test/jmock/jmock-2.5.1.jar
./third_party/test/jmock/jmock-junit3-2.5.1.jar
./third_party/test/mockito/mockito-all-1.8.2.jar


A number of the files do not have the correct/appropriate source header from:
http://www.apache.org/legal/src-headers.html
Specifically all of the python files under src/python/api, and a
number of files with incorrect headers in the root of the archive.


The NOTICE file doesn't appear complete, but it's lack of completeness
appears to be from the binaries, so I won't dig into that.

Sorry I have to vote -1 (binding).

--David

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by Joe Brockmeier <jz...@zonker.net>.
Hi Ali, 

On Wed, Jun 19, 2013, at 03:06 PM, Ali Lown wrote:
> The voting period has now passed, and we have received no votes from
> anyone
> here :(

Sorry, folks are too busy debating the problems of the Incubator to take
time to review Incubator releases. ;-) 

I'll try to take a look tonight and nudge a few other IPMC folks do to
the same. 

Best,

jzb
-- 
Joe Brockmeier
jzb@zonker.net
Twitter: @jzb
http://www.dissociatedpress.net/

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by Christian Grobmeier <gr...@gmail.com>.
Hi Ali,

unfortunately i have not seen the IPMC reviewing the release within
the three days voting period.
Please leave the vote open and write a reminder from time to time.

here is some more information on the voting status:
http://people.apache.org/~brane/incubator/votes.html

Cheers

On Wed, Jun 19, 2013 at 10:06 PM, Ali Lown <al...@lown.me.uk> wrote:
> The voting period has now passed, and we have received no votes from anyone
> here :(
>
> Could some IPMC please look at this (we need at least 2 more +1)? Being an
> initial release, it is very important for it to be 'accepted', since it
> will dictate how Wave's releases look in the future.
>
> Thanks,
> Ali
> On 15 Jun 2013 23:24, "Ali Lown" <al...@apache.org> wrote:
>
>> The Wave community has voted on and approved the proposal to release
>> Apache Wave 0.4 (incubating) based on RC3.
>>
>> This will be the initial incubator release for Wave.
>>
>> The proposal for release can be found at:
>>
>> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVd6n5_LLWUUfaEkY4kzLDUmd-txyadkMqWKmTfbWTGkSA@mail.gmail.com%3E
>>
>> The result from the wave-dev vote can be found at:
>>
>> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
>>
>> Wave 0.4 RC3 artefacts are available at:
>> https://people.apache.org/~al/wave_rc/0.4-rc3/
>> Note: The checksums are SHA-512's
>>
>> This is a build from the subversion tag wave-0.4-rc3 at:
>> https://svn.apache.org/repos/asf/incubator/wave/tags/
>>
>> A summary about the project and other information can be found in the
>> RELEASE-NOTES at:
>> https://people.apache.org/~al/wave_rc/0.4-rc3/RELEASE-NOTES
>> and is included in the tarballs.
>>
>> Votes, please. This vote will close at 0000 GMT 19-June 2013.
>>
>> [  ] +1   Release these artefacts
>> [  ] +0   OK, but...
>> [  ] -0    OK, but really should fix...
>> [  ] -1    I oppose this release because...
>>
>> Thanks.
>> Ali
>>



-- 
http://www.grobmeier.de
https://www.timeandbill.de

---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org


Re: [VOTE] Release Apache Wave 0.4 based on RC3

Posted by Ali Lown <al...@lown.me.uk>.
The voting period has now passed, and we have received no votes from anyone
here :(

Could some IPMC please look at this (we need at least 2 more +1)? Being an
initial release, it is very important for it to be 'accepted', since it
will dictate how Wave's releases look in the future.

Thanks,
Ali
On 15 Jun 2013 23:24, "Ali Lown" <al...@apache.org> wrote:

> The Wave community has voted on and approved the proposal to release
> Apache Wave 0.4 (incubating) based on RC3.
>
> This will be the initial incubator release for Wave.
>
> The proposal for release can be found at:
>
> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVd6n5_LLWUUfaEkY4kzLDUmd-txyadkMqWKmTfbWTGkSA@mail.gmail.com%3E
>
> The result from the wave-dev vote can be found at:
>
> https://mail-archives.apache.org/mod_mbox/incubator-wave-dev/201306.mbox/%3CCABRGrVfPOwN3E8N-uScruYbxdezpfZzAJHMp8dN%2BUfpF6s%2BDGw%40mail.gmail.com%3E
>
> Wave 0.4 RC3 artefacts are available at:
> https://people.apache.org/~al/wave_rc/0.4-rc3/
> Note: The checksums are SHA-512's
>
> This is a build from the subversion tag wave-0.4-rc3 at:
> https://svn.apache.org/repos/asf/incubator/wave/tags/
>
> A summary about the project and other information can be found in the
> RELEASE-NOTES at:
> https://people.apache.org/~al/wave_rc/0.4-rc3/RELEASE-NOTES
> and is included in the tarballs.
>
> Votes, please. This vote will close at 0000 GMT 19-June 2013.
>
> [  ] +1   Release these artefacts
> [  ] +0   OK, but...
> [  ] -0    OK, but really should fix...
> [  ] -1    I oppose this release because...
>
> Thanks.
> Ali
>