You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@ws.apache.org by Colm O hEigeartaigh <co...@apache.org> on 2010/09/27 17:57:36 UTC
[VOTE] Release WSS4J 1.5.9
To the Apache Web Services Community,
This is a call for votes for the wss4j-1.5.9 release. It's been well
over a year since 1.5.8 was released, and 32 bugs have been fixed in
1.5.9.
The distribution can be found at the following URL:
http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
You can also point maven at the following URL to pull down the 1.5.9
release POM, source, and class JARs:
http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
Additionally, the generated version of the web site can be found at
http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
This vote will stay open for at least 72 hours.
Here is my (non-binding and advisory) +1.
Thanks,
Colm.
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
On Tue, Sep 28, 2010 at 17:49, Daniel Kulp <dk...@apache.org> wrote:
> On Tuesday 28 September 2010 11:14:54 am Andreas Veithen wrote:
>> We found a JDK with unlimited strength encryption and the build is
>> successfully running on Hudson. There are still three things to do:
>>
>> 1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
>> that the developers will receive notifications about failed builds. I
>> don't know who can do this.
>
> I don't think we can. Last I checked, it only works if it's posting to a
> moderated list, which most of the ws.a.o lists are not moderated. (which I
> think is bogus)
>
>
>
>> 2. Figure out why only the POMs, but not the JARs are deployed to the
>> snapshot repository [1]. Anybody seen this before?
>
> That's interesting. No idea. We probably should switch wss4j completely over
> to nexus though. Right now, it still points to the old area in the pom. If
> the pom is update, we could just have hudson do "mvn deploy" and be able to
> test the same way hudson is doing it.
Updated the distributionManagement section and reconfigured the Hudson
job to do a mvn clean deploy. Now it's working.
>
> Dan
>
>
>> 3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
>> continuous integration becomes effective. I'll do that.
>>
>> Andreas
>>
>> [1]
>> http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10
>> -SNAPSHOT/
>>
>> On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
>>
>> <an...@gmail.com> wrote:
>> > I've created a job [1] in Hudson, but the test suite fails because the
>> > JDK is not configured with unlimited strength encryption. I've asked
>> > builds@apache.org for advice.
>> >
>> > Andreas
>> >
>> > [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>> >
>> > On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org>
> wrote:
>> >> Done.
>> >>
>> >> Colm.
>> >>
>> >> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> >>
>> >> <an...@gmail.com> wrote:
>> >>> Confirmed.
>> >>>
>> >>> I would like to set up continuous integration between WSS4J and
>> >>> Rampart. If you update the version of the 1.5 branch to
>> >>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> >>> automatic deployment of snapshots to the Nexus repository).
>> >>>
>> >>> Andreas
>> >>>
>> >>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org>
> wrote:
>> >>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>> >>>>
>> >>>> Colm.
>> >>>>
>> >>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com>
> wrote:
>> >>>>> Hi Colm, all,
>> >>>>>
>> >>>>> Thanks for the push of this release - I'll take a look at the
>> >>>>> artifacts later this afternoon. One question to you and to the
>> >>>>> Rampart devs, which is of course "has this been tested with
>> >>>>> Rampart?"
>> >>>>>
>> >>>>> Thanks,
>> >>>>> --Glen
>> >>>>>
>> >>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>> >>>>>> To the Apache Web Services Community,
>> >>>>>>
>> >>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>> >>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>> >>>>>> 1.5.9.
>> >>>>>>
>> >>>>>> The distribution can be found at the following URL:
>> >>>>>>
>> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>> >>>>>>
>> >>>>>> You can also point maven at the following URL to pull down the 1.5.9
>> >>>>>> release POM, source, and class JARs:
>> >>>>>>
>> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>> >>>>>>
>> >>>>>> Additionally, the generated version of the web site can be found at
>> >>>>>>
>> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>> >>>>>>
>> >>>>>> This vote will stay open for at least 72 hours.
>> >>>>>>
>> >>>>>> Here is my (non-binding and advisory) +1.
>> >>>>>>
>> >>>>>> Thanks,
>> >>>>>>
>> >>>>>> Colm.
>> >>>>>>
>> >>>>>> --------------------------------------------------------------------
>> >>>>>> - To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org For
>> >>>>>> additional commands, e-mail: wss4j-dev-help@ws.apache.org
>> >>>>
>> >>>> ---------------------------------------------------------------------
>> >>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> >>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>> >>>
>> >>> ---------------------------------------------------------------------
>> >>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> >>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
> --
> Daniel Kulp
> dkulp@apache.org
> http://dankulp.com/blog
>
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
On Tue, Sep 28, 2010 at 17:49, Daniel Kulp <dk...@apache.org> wrote:
> On Tuesday 28 September 2010 11:14:54 am Andreas Veithen wrote:
>> We found a JDK with unlimited strength encryption and the build is
>> successfully running on Hudson. There are still three things to do:
>>
>> 1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
>> that the developers will receive notifications about failed builds. I
>> don't know who can do this.
>
> I don't think we can. Last I checked, it only works if it's posting to a
> moderated list, which most of the ws.a.o lists are not moderated. (which I
> think is bogus)
>
>
>
>> 2. Figure out why only the POMs, but not the JARs are deployed to the
>> snapshot repository [1]. Anybody seen this before?
>
> That's interesting. No idea. We probably should switch wss4j completely over
> to nexus though. Right now, it still points to the old area in the pom. If
> the pom is update, we could just have hudson do "mvn deploy" and be able to
> test the same way hudson is doing it.
Updated the distributionManagement section and reconfigured the Hudson
job to do a mvn clean deploy. Now it's working.
>
> Dan
>
>
>> 3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
>> continuous integration becomes effective. I'll do that.
>>
>> Andreas
>>
>> [1]
>> http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10
>> -SNAPSHOT/
>>
>> On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
>>
>> <an...@gmail.com> wrote:
>> > I've created a job [1] in Hudson, but the test suite fails because the
>> > JDK is not configured with unlimited strength encryption. I've asked
>> > builds@apache.org for advice.
>> >
>> > Andreas
>> >
>> > [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>> >
>> > On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org>
> wrote:
>> >> Done.
>> >>
>> >> Colm.
>> >>
>> >> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> >>
>> >> <an...@gmail.com> wrote:
>> >>> Confirmed.
>> >>>
>> >>> I would like to set up continuous integration between WSS4J and
>> >>> Rampart. If you update the version of the 1.5 branch to
>> >>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> >>> automatic deployment of snapshots to the Nexus repository).
>> >>>
>> >>> Andreas
>> >>>
>> >>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org>
> wrote:
>> >>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>> >>>>
>> >>>> Colm.
>> >>>>
>> >>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com>
> wrote:
>> >>>>> Hi Colm, all,
>> >>>>>
>> >>>>> Thanks for the push of this release - I'll take a look at the
>> >>>>> artifacts later this afternoon. One question to you and to the
>> >>>>> Rampart devs, which is of course "has this been tested with
>> >>>>> Rampart?"
>> >>>>>
>> >>>>> Thanks,
>> >>>>> --Glen
>> >>>>>
>> >>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>> >>>>>> To the Apache Web Services Community,
>> >>>>>>
>> >>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>> >>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>> >>>>>> 1.5.9.
>> >>>>>>
>> >>>>>> The distribution can be found at the following URL:
>> >>>>>>
>> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>> >>>>>>
>> >>>>>> You can also point maven at the following URL to pull down the 1.5.9
>> >>>>>> release POM, source, and class JARs:
>> >>>>>>
>> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>> >>>>>>
>> >>>>>> Additionally, the generated version of the web site can be found at
>> >>>>>>
>> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>> >>>>>>
>> >>>>>> This vote will stay open for at least 72 hours.
>> >>>>>>
>> >>>>>> Here is my (non-binding and advisory) +1.
>> >>>>>>
>> >>>>>> Thanks,
>> >>>>>>
>> >>>>>> Colm.
>> >>>>>>
>> >>>>>> --------------------------------------------------------------------
>> >>>>>> - To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org For
>> >>>>>> additional commands, e-mail: wss4j-dev-help@ws.apache.org
>> >>>>
>> >>>> ---------------------------------------------------------------------
>> >>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> >>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>> >>>
>> >>> ---------------------------------------------------------------------
>> >>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> >>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
> --
> Daniel Kulp
> dkulp@apache.org
> http://dankulp.com/blog
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Daniel Kulp <dk...@apache.org>.
On Tuesday 28 September 2010 11:14:54 am Andreas Veithen wrote:
> We found a JDK with unlimited strength encryption and the build is
> successfully running on Hudson. There are still three things to do:
>
> 1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
> that the developers will receive notifications about failed builds. I
> don't know who can do this.
I don't think we can. Last I checked, it only works if it's posting to a
moderated list, which most of the ws.a.o lists are not moderated. (which I
think is bogus)
> 2. Figure out why only the POMs, but not the JARs are deployed to the
> snapshot repository [1]. Anybody seen this before?
That's interesting. No idea. We probably should switch wss4j completely over
to nexus though. Right now, it still points to the old area in the pom. If
the pom is update, we could just have hudson do "mvn deploy" and be able to
test the same way hudson is doing it.
Dan
> 3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
> continuous integration becomes effective. I'll do that.
>
> Andreas
>
> [1]
> http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10
> -SNAPSHOT/
>
> On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
>
> <an...@gmail.com> wrote:
> > I've created a job [1] in Hudson, but the test suite fails because the
> > JDK is not configured with unlimited strength encryption. I've asked
> > builds@apache.org for advice.
> >
> > Andreas
> >
> > [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
> >
> > On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org>
wrote:
> >> Done.
> >>
> >> Colm.
> >>
> >> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> >>
> >> <an...@gmail.com> wrote:
> >>> Confirmed.
> >>>
> >>> I would like to set up continuous integration between WSS4J and
> >>> Rampart. If you update the version of the 1.5 branch to
> >>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
> >>> automatic deployment of snapshots to the Nexus repository).
> >>>
> >>> Andreas
> >>>
> >>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org>
wrote:
> >>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
> >>>>
> >>>> Colm.
> >>>>
> >>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com>
wrote:
> >>>>> Hi Colm, all,
> >>>>>
> >>>>> Thanks for the push of this release - I'll take a look at the
> >>>>> artifacts later this afternoon. One question to you and to the
> >>>>> Rampart devs, which is of course "has this been tested with
> >>>>> Rampart?"
> >>>>>
> >>>>> Thanks,
> >>>>> --Glen
> >>>>>
> >>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> >>>>>> To the Apache Web Services Community,
> >>>>>>
> >>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
> >>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> >>>>>> 1.5.9.
> >>>>>>
> >>>>>> The distribution can be found at the following URL:
> >>>>>>
> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
> >>>>>>
> >>>>>> You can also point maven at the following URL to pull down the 1.5.9
> >>>>>> release POM, source, and class JARs:
> >>>>>>
> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
> >>>>>>
> >>>>>> Additionally, the generated version of the web site can be found at
> >>>>>>
> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
> >>>>>>
> >>>>>> This vote will stay open for at least 72 hours.
> >>>>>>
> >>>>>> Here is my (non-binding and advisory) +1.
> >>>>>>
> >>>>>> Thanks,
> >>>>>>
> >>>>>> Colm.
> >>>>>>
> >>>>>> --------------------------------------------------------------------
> >>>>>> - To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org For
> >>>>>> additional commands, e-mail: wss4j-dev-help@ws.apache.org
> >>>>
> >>>> ---------------------------------------------------------------------
> >>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> >>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
> >>>
> >>> ---------------------------------------------------------------------
> >>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> >>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
--
Daniel Kulp
dkulp@apache.org
http://dankulp.com/blog
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Daniel Kulp <dk...@apache.org>.
On Tuesday 28 September 2010 11:14:54 am Andreas Veithen wrote:
> We found a JDK with unlimited strength encryption and the build is
> successfully running on Hudson. There are still three things to do:
>
> 1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
> that the developers will receive notifications about failed builds. I
> don't know who can do this.
I don't think we can. Last I checked, it only works if it's posting to a
moderated list, which most of the ws.a.o lists are not moderated. (which I
think is bogus)
> 2. Figure out why only the POMs, but not the JARs are deployed to the
> snapshot repository [1]. Anybody seen this before?
That's interesting. No idea. We probably should switch wss4j completely over
to nexus though. Right now, it still points to the old area in the pom. If
the pom is update, we could just have hudson do "mvn deploy" and be able to
test the same way hudson is doing it.
Dan
> 3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
> continuous integration becomes effective. I'll do that.
>
> Andreas
>
> [1]
> http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10
> -SNAPSHOT/
>
> On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
>
> <an...@gmail.com> wrote:
> > I've created a job [1] in Hudson, but the test suite fails because the
> > JDK is not configured with unlimited strength encryption. I've asked
> > builds@apache.org for advice.
> >
> > Andreas
> >
> > [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
> >
> > On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org>
wrote:
> >> Done.
> >>
> >> Colm.
> >>
> >> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> >>
> >> <an...@gmail.com> wrote:
> >>> Confirmed.
> >>>
> >>> I would like to set up continuous integration between WSS4J and
> >>> Rampart. If you update the version of the 1.5 branch to
> >>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
> >>> automatic deployment of snapshots to the Nexus repository).
> >>>
> >>> Andreas
> >>>
> >>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org>
wrote:
> >>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
> >>>>
> >>>> Colm.
> >>>>
> >>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com>
wrote:
> >>>>> Hi Colm, all,
> >>>>>
> >>>>> Thanks for the push of this release - I'll take a look at the
> >>>>> artifacts later this afternoon. One question to you and to the
> >>>>> Rampart devs, which is of course "has this been tested with
> >>>>> Rampart?"
> >>>>>
> >>>>> Thanks,
> >>>>> --Glen
> >>>>>
> >>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> >>>>>> To the Apache Web Services Community,
> >>>>>>
> >>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
> >>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> >>>>>> 1.5.9.
> >>>>>>
> >>>>>> The distribution can be found at the following URL:
> >>>>>>
> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
> >>>>>>
> >>>>>> You can also point maven at the following URL to pull down the 1.5.9
> >>>>>> release POM, source, and class JARs:
> >>>>>>
> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
> >>>>>>
> >>>>>> Additionally, the generated version of the web site can be found at
> >>>>>>
> >>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
> >>>>>>
> >>>>>> This vote will stay open for at least 72 hours.
> >>>>>>
> >>>>>> Here is my (non-binding and advisory) +1.
> >>>>>>
> >>>>>> Thanks,
> >>>>>>
> >>>>>> Colm.
> >>>>>>
> >>>>>> --------------------------------------------------------------------
> >>>>>> - To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org For
> >>>>>> additional commands, e-mail: wss4j-dev-help@ws.apache.org
> >>>>
> >>>> ---------------------------------------------------------------------
> >>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> >>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
> >>>
> >>> ---------------------------------------------------------------------
> >>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> >>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
--
Daniel Kulp
dkulp@apache.org
http://dankulp.com/blog
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
We found a JDK with unlimited strength encryption and the build is
successfully running on Hudson. There are still three things to do:
1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
that the developers will receive notifications about failed builds. I
don't know who can do this.
2. Figure out why only the POMs, but not the JARs are deployed to the
snapshot repository [1]. Anybody seen this before?
3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
continuous integration becomes effective. I'll do that.
Andreas
[1] http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10-SNAPSHOT/
On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
<an...@gmail.com> wrote:
> I've created a job [1] in Hudson, but the test suite fails because the
> JDK is not configured with unlimited strength encryption. I've asked
> builds@apache.org for advice.
>
> Andreas
>
> [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>
> On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
>> Done.
>>
>> Colm.
>>
>> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> <an...@gmail.com> wrote:
>>> Confirmed.
>>>
>>> I would like to set up continuous integration between WSS4J and
>>> Rampart. If you update the version of the 1.5 branch to
>>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>>> automatic deployment of snapshots to the Nexus repository).
>>>
>>> Andreas
>>>
>>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>>
>>>> Colm.
>>>>
>>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>>> Hi Colm, all,
>>>>>
>>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>>> course "has this been tested with Rampart?"
>>>>>
>>>>> Thanks,
>>>>> --Glen
>>>>>
>>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>>> To the Apache Web Services Community,
>>>>>>
>>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>>> 1.5.9.
>>>>>>
>>>>>> The distribution can be found at the following URL:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>>
>>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>>> release POM, source, and class JARs:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>>
>>>>>> Additionally, the generated version of the web site can be found at
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>>
>>>>>> This vote will stay open for at least 72 hours.
>>>>>>
>>>>>> Here is my (non-binding and advisory) +1.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Colm.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>>
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
We found a JDK with unlimited strength encryption and the build is
successfully running on Hudson. There are still three things to do:
1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
that the developers will receive notifications about failed builds. I
don't know who can do this.
2. Figure out why only the POMs, but not the JARs are deployed to the
snapshot repository [1]. Anybody seen this before?
3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
continuous integration becomes effective. I'll do that.
Andreas
[1] http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10-SNAPSHOT/
On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
<an...@gmail.com> wrote:
> I've created a job [1] in Hudson, but the test suite fails because the
> JDK is not configured with unlimited strength encryption. I've asked
> builds@apache.org for advice.
>
> Andreas
>
> [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>
> On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
>> Done.
>>
>> Colm.
>>
>> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> <an...@gmail.com> wrote:
>>> Confirmed.
>>>
>>> I would like to set up continuous integration between WSS4J and
>>> Rampart. If you update the version of the 1.5 branch to
>>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>>> automatic deployment of snapshots to the Nexus repository).
>>>
>>> Andreas
>>>
>>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>>
>>>> Colm.
>>>>
>>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>>> Hi Colm, all,
>>>>>
>>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>>> course "has this been tested with Rampart?"
>>>>>
>>>>> Thanks,
>>>>> --Glen
>>>>>
>>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>>> To the Apache Web Services Community,
>>>>>>
>>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>>> 1.5.9.
>>>>>>
>>>>>> The distribution can be found at the following URL:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>>
>>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>>> release POM, source, and class JARs:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>>
>>>>>> Additionally, the generated version of the web site can be found at
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>>
>>>>>> This vote will stay open for at least 72 hours.
>>>>>>
>>>>>> Here is my (non-binding and advisory) +1.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Colm.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>>
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
We found a JDK with unlimited strength encryption and the build is
successfully running on Hudson. There are still three things to do:
1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
that the developers will receive notifications about failed builds. I
don't know who can do this.
2. Figure out why only the POMs, but not the JARs are deployed to the
snapshot repository [1]. Anybody seen this before?
3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
continuous integration becomes effective. I'll do that.
Andreas
[1] http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10-SNAPSHOT/
On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
<an...@gmail.com> wrote:
> I've created a job [1] in Hudson, but the test suite fails because the
> JDK is not configured with unlimited strength encryption. I've asked
> builds@apache.org for advice.
>
> Andreas
>
> [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>
> On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
>> Done.
>>
>> Colm.
>>
>> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> <an...@gmail.com> wrote:
>>> Confirmed.
>>>
>>> I would like to set up continuous integration between WSS4J and
>>> Rampart. If you update the version of the 1.5 branch to
>>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>>> automatic deployment of snapshots to the Nexus repository).
>>>
>>> Andreas
>>>
>>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>>
>>>> Colm.
>>>>
>>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>>> Hi Colm, all,
>>>>>
>>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>>> course "has this been tested with Rampart?"
>>>>>
>>>>> Thanks,
>>>>> --Glen
>>>>>
>>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>>> To the Apache Web Services Community,
>>>>>>
>>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>>> 1.5.9.
>>>>>>
>>>>>> The distribution can be found at the following URL:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>>
>>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>>> release POM, source, and class JARs:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>>
>>>>>> Additionally, the generated version of the web site can be found at
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>>
>>>>>> This vote will stay open for at least 72 hours.
>>>>>>
>>>>>> Here is my (non-binding and advisory) +1.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Colm.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>>
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
We found a JDK with unlimited strength encryption and the build is
successfully running on Hudson. There are still three things to do:
1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
that the developers will receive notifications about failed builds. I
don't know who can do this.
2. Figure out why only the POMs, but not the JARs are deployed to the
snapshot repository [1]. Anybody seen this before?
3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
continuous integration becomes effective. I'll do that.
Andreas
[1] http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10-SNAPSHOT/
On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
<an...@gmail.com> wrote:
> I've created a job [1] in Hudson, but the test suite fails because the
> JDK is not configured with unlimited strength encryption. I've asked
> builds@apache.org for advice.
>
> Andreas
>
> [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>
> On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
>> Done.
>>
>> Colm.
>>
>> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> <an...@gmail.com> wrote:
>>> Confirmed.
>>>
>>> I would like to set up continuous integration between WSS4J and
>>> Rampart. If you update the version of the 1.5 branch to
>>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>>> automatic deployment of snapshots to the Nexus repository).
>>>
>>> Andreas
>>>
>>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>>
>>>> Colm.
>>>>
>>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>>> Hi Colm, all,
>>>>>
>>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>>> course "has this been tested with Rampart?"
>>>>>
>>>>> Thanks,
>>>>> --Glen
>>>>>
>>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>>> To the Apache Web Services Community,
>>>>>>
>>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>>> 1.5.9.
>>>>>>
>>>>>> The distribution can be found at the following URL:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>>
>>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>>> release POM, source, and class JARs:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>>
>>>>>> Additionally, the generated version of the web site can be found at
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>>
>>>>>> This vote will stay open for at least 72 hours.
>>>>>>
>>>>>> Here is my (non-binding and advisory) +1.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Colm.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>>
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
We found a JDK with unlimited strength encryption and the build is
successfully running on Hudson. There are still three things to do:
1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
that the developers will receive notifications about failed builds. I
don't know who can do this.
2. Figure out why only the POMs, but not the JARs are deployed to the
snapshot repository [1]. Anybody seen this before?
3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
continuous integration becomes effective. I'll do that.
Andreas
[1] http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10-SNAPSHOT/
On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
<an...@gmail.com> wrote:
> I've created a job [1] in Hudson, but the test suite fails because the
> JDK is not configured with unlimited strength encryption. I've asked
> builds@apache.org for advice.
>
> Andreas
>
> [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>
> On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
>> Done.
>>
>> Colm.
>>
>> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> <an...@gmail.com> wrote:
>>> Confirmed.
>>>
>>> I would like to set up continuous integration between WSS4J and
>>> Rampart. If you update the version of the 1.5 branch to
>>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>>> automatic deployment of snapshots to the Nexus repository).
>>>
>>> Andreas
>>>
>>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>>
>>>> Colm.
>>>>
>>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>>> Hi Colm, all,
>>>>>
>>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>>> course "has this been tested with Rampart?"
>>>>>
>>>>> Thanks,
>>>>> --Glen
>>>>>
>>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>>> To the Apache Web Services Community,
>>>>>>
>>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>>> 1.5.9.
>>>>>>
>>>>>> The distribution can be found at the following URL:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>>
>>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>>> release POM, source, and class JARs:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>>
>>>>>> Additionally, the generated version of the web site can be found at
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>>
>>>>>> This vote will stay open for at least 72 hours.
>>>>>>
>>>>>> Here is my (non-binding and advisory) +1.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Colm.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>>
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
We found a JDK with unlimited strength encryption and the build is
successfully running on Hudson. There are still three things to do:
1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
that the developers will receive notifications about failed builds. I
don't know who can do this.
2. Figure out why only the POMs, but not the JARs are deployed to the
snapshot repository [1]. Anybody seen this before?
3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
continuous integration becomes effective. I'll do that.
Andreas
[1] http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10-SNAPSHOT/
On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
<an...@gmail.com> wrote:
> I've created a job [1] in Hudson, but the test suite fails because the
> JDK is not configured with unlimited strength encryption. I've asked
> builds@apache.org for advice.
>
> Andreas
>
> [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>
> On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
>> Done.
>>
>> Colm.
>>
>> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> <an...@gmail.com> wrote:
>>> Confirmed.
>>>
>>> I would like to set up continuous integration between WSS4J and
>>> Rampart. If you update the version of the 1.5 branch to
>>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>>> automatic deployment of snapshots to the Nexus repository).
>>>
>>> Andreas
>>>
>>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>>
>>>> Colm.
>>>>
>>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>>> Hi Colm, all,
>>>>>
>>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>>> course "has this been tested with Rampart?"
>>>>>
>>>>> Thanks,
>>>>> --Glen
>>>>>
>>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>>> To the Apache Web Services Community,
>>>>>>
>>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>>> 1.5.9.
>>>>>>
>>>>>> The distribution can be found at the following URL:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>>
>>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>>> release POM, source, and class JARs:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>>
>>>>>> Additionally, the generated version of the web site can be found at
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>>
>>>>>> This vote will stay open for at least 72 hours.
>>>>>>
>>>>>> Here is my (non-binding and advisory) +1.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Colm.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>>
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
We found a JDK with unlimited strength encryption and the build is
successfully running on Hudson. There are still three things to do:
1. Allow hudson@hudson.apache.org to post to the wss4j-dev list, so
that the developers will receive notifications about failed builds. I
don't know who can do this.
2. Figure out why only the POMs, but not the JARs are deployed to the
snapshot repository [1]. Anybody seen this before?
3. Update Rampart's WSS4J dependency to 1.5.10-SNAPSHOT so that
continuous integration becomes effective. I'll do that.
Andreas
[1] http://repository.apache.org/snapshots/org/apache/ws/security/wss4j/1.5.10-SNAPSHOT/
On Tue, Sep 28, 2010 at 15:59, Andreas Veithen
<an...@gmail.com> wrote:
> I've created a job [1] in Hudson, but the test suite fails because the
> JDK is not configured with unlimited strength encryption. I've asked
> builds@apache.org for advice.
>
> Andreas
>
> [1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
>
> On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
>> Done.
>>
>> Colm.
>>
>> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
>> <an...@gmail.com> wrote:
>>> Confirmed.
>>>
>>> I would like to set up continuous integration between WSS4J and
>>> Rampart. If you update the version of the 1.5 branch to
>>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>>> automatic deployment of snapshots to the Nexus repository).
>>>
>>> Andreas
>>>
>>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>>
>>>> Colm.
>>>>
>>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>>> Hi Colm, all,
>>>>>
>>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>>> course "has this been tested with Rampart?"
>>>>>
>>>>> Thanks,
>>>>> --Glen
>>>>>
>>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>>> To the Apache Web Services Community,
>>>>>>
>>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>>> 1.5.9.
>>>>>>
>>>>>> The distribution can be found at the following URL:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>>
>>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>>> release POM, source, and class JARs:
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>>
>>>>>> Additionally, the generated version of the web site can be found at
>>>>>>
>>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>>
>>>>>> This vote will stay open for at least 72 hours.
>>>>>>
>>>>>> Here is my (non-binding and advisory) +1.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Colm.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>>
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
I've created a job [1] in Hudson, but the test suite fails because the
JDK is not configured with unlimited strength encryption. I've asked
builds@apache.org for advice.
Andreas
[1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
> Done.
>
> Colm.
>
> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> <an...@gmail.com> wrote:
>> Confirmed.
>>
>> I would like to set up continuous integration between WSS4J and
>> Rampart. If you update the version of the 1.5 branch to
>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> automatic deployment of snapshots to the Nexus repository).
>>
>> Andreas
>>
>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>
>>> Colm.
>>>
>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>> Hi Colm, all,
>>>>
>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>> course "has this been tested with Rampart?"
>>>>
>>>> Thanks,
>>>> --Glen
>>>>
>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>> To the Apache Web Services Community,
>>>>>
>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>> 1.5.9.
>>>>>
>>>>> The distribution can be found at the following URL:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>
>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>> release POM, source, and class JARs:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>
>>>>> Additionally, the generated version of the web site can be found at
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>
>>>>> This vote will stay open for at least 72 hours.
>>>>>
>>>>> Here is my (non-binding and advisory) +1.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Colm.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
I've created a job [1] in Hudson, but the test suite fails because the
JDK is not configured with unlimited strength encryption. I've asked
builds@apache.org for advice.
Andreas
[1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
> Done.
>
> Colm.
>
> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> <an...@gmail.com> wrote:
>> Confirmed.
>>
>> I would like to set up continuous integration between WSS4J and
>> Rampart. If you update the version of the 1.5 branch to
>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> automatic deployment of snapshots to the Nexus repository).
>>
>> Andreas
>>
>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>
>>> Colm.
>>>
>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>> Hi Colm, all,
>>>>
>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>> course "has this been tested with Rampart?"
>>>>
>>>> Thanks,
>>>> --Glen
>>>>
>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>> To the Apache Web Services Community,
>>>>>
>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>> 1.5.9.
>>>>>
>>>>> The distribution can be found at the following URL:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>
>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>> release POM, source, and class JARs:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>
>>>>> Additionally, the generated version of the web site can be found at
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>
>>>>> This vote will stay open for at least 72 hours.
>>>>>
>>>>> Here is my (non-binding and advisory) +1.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Colm.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
I've created a job [1] in Hudson, but the test suite fails because the
JDK is not configured with unlimited strength encryption. I've asked
builds@apache.org for advice.
Andreas
[1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
> Done.
>
> Colm.
>
> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> <an...@gmail.com> wrote:
>> Confirmed.
>>
>> I would like to set up continuous integration between WSS4J and
>> Rampart. If you update the version of the 1.5 branch to
>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> automatic deployment of snapshots to the Nexus repository).
>>
>> Andreas
>>
>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>
>>> Colm.
>>>
>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>> Hi Colm, all,
>>>>
>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>> course "has this been tested with Rampart?"
>>>>
>>>> Thanks,
>>>> --Glen
>>>>
>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>> To the Apache Web Services Community,
>>>>>
>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>> 1.5.9.
>>>>>
>>>>> The distribution can be found at the following URL:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>
>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>> release POM, source, and class JARs:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>
>>>>> Additionally, the generated version of the web site can be found at
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>
>>>>> This vote will stay open for at least 72 hours.
>>>>>
>>>>> Here is my (non-binding and advisory) +1.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Colm.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
I've created a job [1] in Hudson, but the test suite fails because the
JDK is not configured with unlimited strength encryption. I've asked
builds@apache.org for advice.
Andreas
[1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
> Done.
>
> Colm.
>
> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> <an...@gmail.com> wrote:
>> Confirmed.
>>
>> I would like to set up continuous integration between WSS4J and
>> Rampart. If you update the version of the 1.5 branch to
>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> automatic deployment of snapshots to the Nexus repository).
>>
>> Andreas
>>
>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>
>>> Colm.
>>>
>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>> Hi Colm, all,
>>>>
>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>> course "has this been tested with Rampart?"
>>>>
>>>> Thanks,
>>>> --Glen
>>>>
>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>> To the Apache Web Services Community,
>>>>>
>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>> 1.5.9.
>>>>>
>>>>> The distribution can be found at the following URL:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>
>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>> release POM, source, and class JARs:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>
>>>>> Additionally, the generated version of the web site can be found at
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>
>>>>> This vote will stay open for at least 72 hours.
>>>>>
>>>>> Here is my (non-binding and advisory) +1.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Colm.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
I've created a job [1] in Hudson, but the test suite fails because the
JDK is not configured with unlimited strength encryption. I've asked
builds@apache.org for advice.
Andreas
[1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
> Done.
>
> Colm.
>
> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> <an...@gmail.com> wrote:
>> Confirmed.
>>
>> I would like to set up continuous integration between WSS4J and
>> Rampart. If you update the version of the 1.5 branch to
>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> automatic deployment of snapshots to the Nexus repository).
>>
>> Andreas
>>
>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>
>>> Colm.
>>>
>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>> Hi Colm, all,
>>>>
>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>> course "has this been tested with Rampart?"
>>>>
>>>> Thanks,
>>>> --Glen
>>>>
>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>> To the Apache Web Services Community,
>>>>>
>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>> 1.5.9.
>>>>>
>>>>> The distribution can be found at the following URL:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>
>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>> release POM, source, and class JARs:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>
>>>>> Additionally, the generated version of the web site can be found at
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>
>>>>> This vote will stay open for at least 72 hours.
>>>>>
>>>>> Here is my (non-binding and advisory) +1.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Colm.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
I've created a job [1] in Hudson, but the test suite fails because the
JDK is not configured with unlimited strength encryption. I've asked
builds@apache.org for advice.
Andreas
[1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
> Done.
>
> Colm.
>
> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> <an...@gmail.com> wrote:
>> Confirmed.
>>
>> I would like to set up continuous integration between WSS4J and
>> Rampart. If you update the version of the 1.5 branch to
>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> automatic deployment of snapshots to the Nexus repository).
>>
>> Andreas
>>
>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>
>>> Colm.
>>>
>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>> Hi Colm, all,
>>>>
>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>> course "has this been tested with Rampart?"
>>>>
>>>> Thanks,
>>>> --Glen
>>>>
>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>> To the Apache Web Services Community,
>>>>>
>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>> 1.5.9.
>>>>>
>>>>> The distribution can be found at the following URL:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>
>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>> release POM, source, and class JARs:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>
>>>>> Additionally, the generated version of the web site can be found at
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>
>>>>> This vote will stay open for at least 72 hours.
>>>>>
>>>>> Here is my (non-binding and advisory) +1.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Colm.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
I've created a job [1] in Hudson, but the test suite fails because the
JDK is not configured with unlimited strength encryption. I've asked
builds@apache.org for advice.
Andreas
[1] https://hudson.apache.org/hudson/view/WS/job/wss4j-1.5/
On Tue, Sep 28, 2010 at 15:05, Colm O hEigeartaigh <co...@apache.org> wrote:
> Done.
>
> Colm.
>
> On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
> <an...@gmail.com> wrote:
>> Confirmed.
>>
>> I would like to set up continuous integration between WSS4J and
>> Rampart. If you update the version of the 1.5 branch to
>> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
>> automatic deployment of snapshots to the Nexus repository).
>>
>> Andreas
>>
>> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>>
>>> Colm.
>>>
>>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>>> Hi Colm, all,
>>>>
>>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>>> this afternoon. One question to you and to the Rampart devs, which is of
>>>> course "has this been tested with Rampart?"
>>>>
>>>> Thanks,
>>>> --Glen
>>>>
>>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>>> To the Apache Web Services Community,
>>>>>
>>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>>> 1.5.9.
>>>>>
>>>>> The distribution can be found at the following URL:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>>
>>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>>> release POM, source, and class JARs:
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>>
>>>>> Additionally, the generated version of the web site can be found at
>>>>>
>>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>>
>>>>> This vote will stay open for at least 72 hours.
>>>>>
>>>>> Here is my (non-binding and advisory) +1.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Colm.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Colm O hEigeartaigh <co...@apache.org>.
Done.
Colm.
On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
<an...@gmail.com> wrote:
> Confirmed.
>
> I would like to set up continuous integration between WSS4J and
> Rampart. If you update the version of the 1.5 branch to
> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
> automatic deployment of snapshots to the Nexus repository).
>
> Andreas
>
> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>
>> Colm.
>>
>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>> Hi Colm, all,
>>>
>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>> this afternoon. One question to you and to the Rampart devs, which is of
>>> course "has this been tested with Rampart?"
>>>
>>> Thanks,
>>> --Glen
>>>
>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>> To the Apache Web Services Community,
>>>>
>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>> 1.5.9.
>>>>
>>>> The distribution can be found at the following URL:
>>>>
>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>
>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>> release POM, source, and class JARs:
>>>>
>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>
>>>> Additionally, the generated version of the web site can be found at
>>>>
>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>
>>>> This vote will stay open for at least 72 hours.
>>>>
>>>> Here is my (non-binding and advisory) +1.
>>>>
>>>> Thanks,
>>>>
>>>> Colm.
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Colm O hEigeartaigh <co...@apache.org>.
Done.
Colm.
On Tue, Sep 28, 2010 at 1:35 PM, Andreas Veithen
<an...@gmail.com> wrote:
> Confirmed.
>
> I would like to set up continuous integration between WSS4J and
> Rampart. If you update the version of the 1.5 branch to
> 1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
> automatic deployment of snapshots to the Nexus repository).
>
> Andreas
>
> On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
>> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>>
>> Colm.
>>
>> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>>> Hi Colm, all,
>>>
>>> Thanks for the push of this release - I'll take a look at the artifacts later
>>> this afternoon. One question to you and to the Rampart devs, which is of
>>> course "has this been tested with Rampart?"
>>>
>>> Thanks,
>>> --Glen
>>>
>>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>>> To the Apache Web Services Community,
>>>>
>>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>>> 1.5.9.
>>>>
>>>> The distribution can be found at the following URL:
>>>>
>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>>
>>>> You can also point maven at the following URL to pull down the 1.5.9
>>>> release POM, source, and class JARs:
>>>>
>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>>
>>>> Additionally, the generated version of the web site can be found at
>>>>
>>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>>
>>>> This vote will stay open for at least 72 hours.
>>>>
>>>> Here is my (non-binding and advisory) +1.
>>>>
>>>> Thanks,
>>>>
>>>> Colm.
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
Confirmed.
I would like to set up continuous integration between WSS4J and
Rampart. If you update the version of the 1.5 branch to
1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
automatic deployment of snapshots to the Nexus repository).
Andreas
On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>
> Colm.
>
> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>> Hi Colm, all,
>>
>> Thanks for the push of this release - I'll take a look at the artifacts later
>> this afternoon. One question to you and to the Rampart devs, which is of
>> course "has this been tested with Rampart?"
>>
>> Thanks,
>> --Glen
>>
>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>> To the Apache Web Services Community,
>>>
>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>> 1.5.9.
>>>
>>> The distribution can be found at the following URL:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>
>>> You can also point maven at the following URL to pull down the 1.5.9
>>> release POM, source, and class JARs:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>
>>> Additionally, the generated version of the web site can be found at
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>
>>> This vote will stay open for at least 72 hours.
>>>
>>> Here is my (non-binding and advisory) +1.
>>>
>>> Thanks,
>>>
>>> Colm.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
Confirmed.
I would like to set up continuous integration between WSS4J and
Rampart. If you update the version of the 1.5 branch to
1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
automatic deployment of snapshots to the Nexus repository).
Andreas
On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>
> Colm.
>
> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>> Hi Colm, all,
>>
>> Thanks for the push of this release - I'll take a look at the artifacts later
>> this afternoon. One question to you and to the Rampart devs, which is of
>> course "has this been tested with Rampart?"
>>
>> Thanks,
>> --Glen
>>
>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>> To the Apache Web Services Community,
>>>
>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>> 1.5.9.
>>>
>>> The distribution can be found at the following URL:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>
>>> You can also point maven at the following URL to pull down the 1.5.9
>>> release POM, source, and class JARs:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>
>>> Additionally, the generated version of the web site can be found at
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>
>>> This vote will stay open for at least 72 hours.
>>>
>>> Here is my (non-binding and advisory) +1.
>>>
>>> Thanks,
>>>
>>> Colm.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
Confirmed.
I would like to set up continuous integration between WSS4J and
Rampart. If you update the version of the 1.5 branch to
1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
automatic deployment of snapshots to the Nexus repository).
Andreas
On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>
> Colm.
>
> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>> Hi Colm, all,
>>
>> Thanks for the push of this release - I'll take a look at the artifacts later
>> this afternoon. One question to you and to the Rampart devs, which is of
>> course "has this been tested with Rampart?"
>>
>> Thanks,
>> --Glen
>>
>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>> To the Apache Web Services Community,
>>>
>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>> 1.5.9.
>>>
>>> The distribution can be found at the following URL:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>
>>> You can also point maven at the following URL to pull down the 1.5.9
>>> release POM, source, and class JARs:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>
>>> Additionally, the generated version of the web site can be found at
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>
>>> This vote will stay open for at least 72 hours.
>>>
>>> Here is my (non-binding and advisory) +1.
>>>
>>> Thanks,
>>>
>>> Colm.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
Confirmed.
I would like to set up continuous integration between WSS4J and
Rampart. If you update the version of the 1.5 branch to
1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
automatic deployment of snapshots to the Nexus repository).
Andreas
On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>
> Colm.
>
> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>> Hi Colm, all,
>>
>> Thanks for the push of this release - I'll take a look at the artifacts later
>> this afternoon. One question to you and to the Rampart devs, which is of
>> course "has this been tested with Rampart?"
>>
>> Thanks,
>> --Glen
>>
>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>> To the Apache Web Services Community,
>>>
>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>> 1.5.9.
>>>
>>> The distribution can be found at the following URL:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>
>>> You can also point maven at the following URL to pull down the 1.5.9
>>> release POM, source, and class JARs:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>
>>> Additionally, the generated version of the web site can be found at
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>
>>> This vote will stay open for at least 72 hours.
>>>
>>> Here is my (non-binding and advisory) +1.
>>>
>>> Thanks,
>>>
>>> Colm.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
Confirmed.
I would like to set up continuous integration between WSS4J and
Rampart. If you update the version of the 1.5 branch to
1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
automatic deployment of snapshots to the Nexus repository).
Andreas
On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>
> Colm.
>
> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>> Hi Colm, all,
>>
>> Thanks for the push of this release - I'll take a look at the artifacts later
>> this afternoon. One question to you and to the Rampart devs, which is of
>> course "has this been tested with Rampart?"
>>
>> Thanks,
>> --Glen
>>
>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>> To the Apache Web Services Community,
>>>
>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>> 1.5.9.
>>>
>>> The distribution can be found at the following URL:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>
>>> You can also point maven at the following URL to pull down the 1.5.9
>>> release POM, source, and class JARs:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>
>>> Additionally, the generated version of the web site can be found at
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>
>>> This vote will stay open for at least 72 hours.
>>>
>>> Here is my (non-binding and advisory) +1.
>>>
>>> Thanks,
>>>
>>> Colm.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
Confirmed.
I would like to set up continuous integration between WSS4J and
Rampart. If you update the version of the 1.5 branch to
1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
automatic deployment of snapshots to the Nexus repository).
Andreas
On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>
> Colm.
>
> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>> Hi Colm, all,
>>
>> Thanks for the push of this release - I'll take a look at the artifacts later
>> this afternoon. One question to you and to the Rampart devs, which is of
>> course "has this been tested with Rampart?"
>>
>> Thanks,
>> --Glen
>>
>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>> To the Apache Web Services Community,
>>>
>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>> 1.5.9.
>>>
>>> The distribution can be found at the following URL:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>
>>> You can also point maven at the following URL to pull down the 1.5.9
>>> release POM, source, and class JARs:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>
>>> Additionally, the generated version of the web site can be found at
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>
>>> This vote will stay open for at least 72 hours.
>>>
>>> Here is my (non-binding and advisory) +1.
>>>
>>> Thanks,
>>>
>>> Colm.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Andreas Veithen <an...@gmail.com>.
Confirmed.
I would like to set up continuous integration between WSS4J and
Rampart. If you update the version of the 1.5 branch to
1.5.10-SNAPSHOT, then I can set up a Hudson job for WSS4J (including
automatic deployment of snapshots to the Nexus repository).
Andreas
On Tue, Sep 28, 2010 at 14:21, Colm O hEigeartaigh <co...@apache.org> wrote:
> All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
>
> Colm.
>
> On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
>> Hi Colm, all,
>>
>> Thanks for the push of this release - I'll take a look at the artifacts later
>> this afternoon. One question to you and to the Rampart devs, which is of
>> course "has this been tested with Rampart?"
>>
>> Thanks,
>> --Glen
>>
>> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>>> To the Apache Web Services Community,
>>>
>>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>>> 1.5.9.
>>>
>>> The distribution can be found at the following URL:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>>
>>> You can also point maven at the following URL to pull down the 1.5.9
>>> release POM, source, and class JARs:
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>>
>>> Additionally, the generated version of the web site can be found at
>>>
>>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>>
>>> This vote will stay open for at least 72 hours.
>>>
>>> Here is my (non-binding and advisory) +1.
>>>
>>> Thanks,
>>>
>>> Colm.
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Colm O hEigeartaigh <co...@apache.org>.
All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
Colm.
On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
> Hi Colm, all,
>
> Thanks for the push of this release - I'll take a look at the artifacts later
> this afternoon. One question to you and to the Rampart devs, which is of
> course "has this been tested with Rampart?"
>
> Thanks,
> --Glen
>
> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>> To the Apache Web Services Community,
>>
>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>> 1.5.9.
>>
>> The distribution can be found at the following URL:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>
>> You can also point maven at the following URL to pull down the 1.5.9
>> release POM, source, and class JARs:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>
>> Additionally, the generated version of the web site can be found at
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>
>> This vote will stay open for at least 72 hours.
>>
>> Here is my (non-binding and advisory) +1.
>>
>> Thanks,
>>
>> Colm.
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Colm O hEigeartaigh <co...@apache.org>.
All the tests pass when using Rampart Trunk and WSS4J 1.5.9.
Colm.
On Mon, Sep 27, 2010 at 5:17 PM, Glen Daniels <gl...@thoughtcraft.com> wrote:
> Hi Colm, all,
>
> Thanks for the push of this release - I'll take a look at the artifacts later
> this afternoon. One question to you and to the Rampart devs, which is of
> course "has this been tested with Rampart?"
>
> Thanks,
> --Glen
>
> On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
>> To the Apache Web Services Community,
>>
>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>> 1.5.9.
>>
>> The distribution can be found at the following URL:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>
>> You can also point maven at the following URL to pull down the 1.5.9
>> release POM, source, and class JARs:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>
>> Additionally, the generated version of the web site can be found at
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>
>> This vote will stay open for at least 72 hours.
>>
>> Here is my (non-binding and advisory) +1.
>>
>> Thanks,
>>
>> Colm.
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
>> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>>
>
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Glen Daniels <gl...@thoughtcraft.com>.
Hi Colm, all,
Thanks for the push of this release - I'll take a look at the artifacts later
this afternoon. One question to you and to the Rampart devs, which is of
course "has this been tested with Rampart?"
Thanks,
--Glen
On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Glen Daniels <gl...@thoughtcraft.com>.
Hi Colm, all,
Thanks for the push of this release - I'll take a look at the artifacts later
this afternoon. One question to you and to the Rampart devs, which is of
course "has this been tested with Rampart?"
Thanks,
--Glen
On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Glen Daniels <gl...@thoughtcraft.com>.
Hi Colm, all,
Thanks for the push of this release - I'll take a look at the artifacts later
this afternoon. One question to you and to the Rampart devs, which is of
course "has this been tested with Rampart?"
Thanks,
--Glen
On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
Re: [VOTE] Release WSS4J 1.5.9
Posted by Benson Margulies <bi...@gmail.com>.
It does not seem right to me to have to unpack the 'bin' distro to
build from the source. I think that there's a -1's worth of
unhappiness here, but I'll defer to Dan's judgement on the importance
of this issue.
On Mon, Sep 27, 2010 at 1:25 PM, Daniel Kulp <dk...@apache.org> wrote:
>
> My question is why is the "src" release not just a tarball of the svn checkout
> and thus include the libs and the maven pom and such? Probably historical.
>
> Dan
>
>
> On Monday 27 September 2010 1:23:19 pm Colm O hEigeartaigh wrote:
>> You need the
>> "http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/wss4j-bin-1.5.9
>> .zip" file as well to build the jar via "ant jar", as it runs the tests
>> before creating the jar.
>>
>> Colm.
>>
>> On Mon, Sep 27, 2010 at 5:41 PM, Benson Margulies <bi...@gmail.com>
> wrote:
>> > I'm having a bit of trouble building it. I unpacked source and
>> > otherjars and got:
>> >
>> > /Users/benson/Downloads/w/wss4j ant jar
>> > Buildfile: build.xml
>> >
>> > init:
>> >
>> > prepare:
>> > [mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build
>> > [mkdir] Created dir:
>> > /Users/benson/Downloads/w/wss4j/build/test-reports
>> >
>> > prepare-src:
>> > [mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build/classes
>> >
>> > compile.library:
>> > [javac] Compiling 111 source files to
>> > /Users/benson/Downloads/w/wss4j/build/classes
>> > [javac] Note: Some input files use or override a deprecated API.
>> > [javac] Note: Recompile with -Xlint:deprecation for details.
>> > [copy] Copying 4 files to
>> > /Users/benson/Downloads/w/wss4j/build/classes
>> >
>> > compile.samples:
>> >
>> > BUILD FAILED
>> > /Users/benson/Downloads/w/wss4j/build.xml:394: srcdir
>> > "/Users/benson/Downloads/w/wss4j/samples" does not exist!
>> >
>> >
>> >
>> >
>> > On Mon, Sep 27, 2010 at 11:57 AM, Colm O hEigeartaigh
>> >
>> > <co...@apache.org> wrote:
>> >> To the Apache Web Services Community,
>> >>
>> >> This is a call for votes for the wss4j-1.5.9 release. It's been well
>> >> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>> >> 1.5.9.
>> >>
>> >> The distribution can be found at the following URL:
>> >>
>> >> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>> >>
>> >> You can also point maven at the following URL to pull down the 1.5.9
>> >> release POM, source, and class JARs:
>> >>
>> >> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>> >>
>> >> Additionally, the generated version of the web site can be found at
>> >>
>> >> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>> >>
>> >> This vote will stay open for at least 72 hours.
>> >>
>> >> Here is my (non-binding and advisory) +1.
>> >>
>> >> Thanks,
>> >>
>> >> Colm.
>
> --
> Daniel Kulp
> dkulp@apache.org
> http://dankulp.com/blog
>
Re: [VOTE] Release WSS4J 1.5.9
Posted by Daniel Kulp <dk...@apache.org>.
My question is why is the "src" release not just a tarball of the svn checkout
and thus include the libs and the maven pom and such? Probably historical.
Dan
On Monday 27 September 2010 1:23:19 pm Colm O hEigeartaigh wrote:
> You need the
> "http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/wss4j-bin-1.5.9
> .zip" file as well to build the jar via "ant jar", as it runs the tests
> before creating the jar.
>
> Colm.
>
> On Mon, Sep 27, 2010 at 5:41 PM, Benson Margulies <bi...@gmail.com>
wrote:
> > I'm having a bit of trouble building it. I unpacked source and
> > otherjars and got:
> >
> > /Users/benson/Downloads/w/wss4j ant jar
> > Buildfile: build.xml
> >
> > init:
> >
> > prepare:
> > [mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build
> > [mkdir] Created dir:
> > /Users/benson/Downloads/w/wss4j/build/test-reports
> >
> > prepare-src:
> > [mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build/classes
> >
> > compile.library:
> > [javac] Compiling 111 source files to
> > /Users/benson/Downloads/w/wss4j/build/classes
> > [javac] Note: Some input files use or override a deprecated API.
> > [javac] Note: Recompile with -Xlint:deprecation for details.
> > [copy] Copying 4 files to
> > /Users/benson/Downloads/w/wss4j/build/classes
> >
> > compile.samples:
> >
> > BUILD FAILED
> > /Users/benson/Downloads/w/wss4j/build.xml:394: srcdir
> > "/Users/benson/Downloads/w/wss4j/samples" does not exist!
> >
> >
> >
> >
> > On Mon, Sep 27, 2010 at 11:57 AM, Colm O hEigeartaigh
> >
> > <co...@apache.org> wrote:
> >> To the Apache Web Services Community,
> >>
> >> This is a call for votes for the wss4j-1.5.9 release. It's been well
> >> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> >> 1.5.9.
> >>
> >> The distribution can be found at the following URL:
> >>
> >> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
> >>
> >> You can also point maven at the following URL to pull down the 1.5.9
> >> release POM, source, and class JARs:
> >>
> >> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
> >>
> >> Additionally, the generated version of the web site can be found at
> >>
> >> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
> >>
> >> This vote will stay open for at least 72 hours.
> >>
> >> Here is my (non-binding and advisory) +1.
> >>
> >> Thanks,
> >>
> >> Colm.
--
Daniel Kulp
dkulp@apache.org
http://dankulp.com/blog
Re: [VOTE] Release WSS4J 1.5.9
Posted by Colm O hEigeartaigh <co...@apache.org>.
You need the "http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/wss4j-bin-1.5.9.zip"
file as well to build the jar via "ant jar", as it runs the tests
before creating the jar.
Colm.
On Mon, Sep 27, 2010 at 5:41 PM, Benson Margulies <bi...@gmail.com> wrote:
> I'm having a bit of trouble building it. I unpacked source and
> otherjars and got:
>
> /Users/benson/Downloads/w/wss4j ant jar
> Buildfile: build.xml
>
> init:
>
> prepare:
> [mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build
> [mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build/test-reports
>
> prepare-src:
> [mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build/classes
>
> compile.library:
> [javac] Compiling 111 source files to
> /Users/benson/Downloads/w/wss4j/build/classes
> [javac] Note: Some input files use or override a deprecated API.
> [javac] Note: Recompile with -Xlint:deprecation for details.
> [copy] Copying 4 files to /Users/benson/Downloads/w/wss4j/build/classes
>
> compile.samples:
>
> BUILD FAILED
> /Users/benson/Downloads/w/wss4j/build.xml:394: srcdir
> "/Users/benson/Downloads/w/wss4j/samples" does not exist!
>
>
>
>
> On Mon, Sep 27, 2010 at 11:57 AM, Colm O hEigeartaigh
> <co...@apache.org> wrote:
>> To the Apache Web Services Community,
>>
>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>> 1.5.9.
>>
>> The distribution can be found at the following URL:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>
>> You can also point maven at the following URL to pull down the 1.5.9
>> release POM, source, and class JARs:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>
>> Additionally, the generated version of the web site can be found at
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>
>> This vote will stay open for at least 72 hours.
>>
>> Here is my (non-binding and advisory) +1.
>>
>> Thanks,
>>
>> Colm.
>>
>
Re: [VOTE] Release WSS4J 1.5.9
Posted by Benson Margulies <bi...@gmail.com>.
I'm having a bit of trouble building it. I unpacked source and
otherjars and got:
/Users/benson/Downloads/w/wss4j ant jar
Buildfile: build.xml
init:
prepare:
[mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build
[mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build/test-reports
prepare-src:
[mkdir] Created dir: /Users/benson/Downloads/w/wss4j/build/classes
compile.library:
[javac] Compiling 111 source files to
/Users/benson/Downloads/w/wss4j/build/classes
[javac] Note: Some input files use or override a deprecated API.
[javac] Note: Recompile with -Xlint:deprecation for details.
[copy] Copying 4 files to /Users/benson/Downloads/w/wss4j/build/classes
compile.samples:
BUILD FAILED
/Users/benson/Downloads/w/wss4j/build.xml:394: srcdir
"/Users/benson/Downloads/w/wss4j/samples" does not exist!
On Mon, Sep 27, 2010 at 11:57 AM, Colm O hEigeartaigh
<co...@apache.org> wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
Re: [VOTE] Release WSS4J 1.5.9
Posted by Colm O hEigeartaigh <co...@apache.org>.
There isn't any (yet). The release is built off the 1_5_x-fixes branch:
http://svn.apache.org/viewvc/webservices/wss4j/branches/1_5_x-fixes/
with the version numbers modified locally. When the vote passes I
usually svn copy the branch to tags/<version>.
Colm.
On Mon, Sep 27, 2010 at 5:37 PM, Andreas Veithen
<an...@gmail.com> wrote:
> Where is the Subversion tag for this release?
>
> Andreas
>
> On Mon, Sep 27, 2010 at 17:57, Colm O hEigeartaigh <co...@apache.org> wrote:
>> To the Apache Web Services Community,
>>
>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>> 1.5.9.
>>
>> The distribution can be found at the following URL:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>
>> You can also point maven at the following URL to pull down the 1.5.9
>> release POM, source, and class JARs:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>
>> Additionally, the generated version of the web site can be found at
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>
>> This vote will stay open for at least 72 hours.
>>
>> Here is my (non-binding and advisory) +1.
>>
>> Thanks,
>>
>> Colm.
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
Re: [VOTE] Release WSS4J 1.5.9
Posted by Colm O hEigeartaigh <co...@apache.org>.
There isn't any (yet). The release is built off the 1_5_x-fixes branch:
http://svn.apache.org/viewvc/webservices/wss4j/branches/1_5_x-fixes/
with the version numbers modified locally. When the vote passes I
usually svn copy the branch to tags/<version>.
Colm.
On Mon, Sep 27, 2010 at 5:37 PM, Andreas Veithen
<an...@gmail.com> wrote:
> Where is the Subversion tag for this release?
>
> Andreas
>
> On Mon, Sep 27, 2010 at 17:57, Colm O hEigeartaigh <co...@apache.org> wrote:
>> To the Apache Web Services Community,
>>
>> This is a call for votes for the wss4j-1.5.9 release. It's been well
>> over a year since 1.5.8 was released, and 32 bugs have been fixed in
>> 1.5.9.
>>
>> The distribution can be found at the following URL:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>>
>> You can also point maven at the following URL to pull down the 1.5.9
>> release POM, source, and class JARs:
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>>
>> Additionally, the generated version of the web site can be found at
>>
>> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>>
>> This vote will stay open for at least 72 hours.
>>
>> Here is my (non-binding and advisory) +1.
>>
>> Thanks,
>>
>> Colm.
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9
Posted by Andreas Veithen <an...@gmail.com>.
Where is the Subversion tag for this release?
Andreas
On Mon, Sep 27, 2010 at 17:57, Colm O hEigeartaigh <co...@apache.org> wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
---------------------------------------------------------------------
To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: wss4j-dev-help@ws.apache.org
Re: [VOTE] Release WSS4J 1.5.9
Posted by Andreas Veithen <an...@gmail.com>.
Where is the Subversion tag for this release?
Andreas
On Mon, Sep 27, 2010 at 17:57, Colm O hEigeartaigh <co...@apache.org> wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
Re: [VOTE] Release WSS4J 1.5.9
Posted by Benson Margulies <bi...@gmail.com>.
Also, does the existence of Xerces security fixes perhaps drive an
update of the copy of Xerces in endorsed?
On Mon, Sep 27, 2010 at 11:57 AM, Colm O hEigeartaigh
<co...@apache.org> wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Glen Daniels <gl...@thoughtcraft.com>.
Hi Colm, all,
Thanks for the push of this release - I'll take a look at the artifacts later
this afternoon. One question to you and to the Rampart devs, which is of
course "has this been tested with Rampart?"
Thanks,
--Glen
On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Glen Daniels <gl...@thoughtcraft.com>.
Hi Colm, all,
Thanks for the push of this release - I'll take a look at the artifacts later
this afternoon. One question to you and to the Rampart devs, which is of
course "has this been tested with Rampart?"
Thanks,
--Glen
On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Glen Daniels <gl...@thoughtcraft.com>.
Hi Colm, all,
Thanks for the push of this release - I'll take a look at the artifacts later
this afternoon. One question to you and to the Rampart devs, which is of
course "has this been tested with Rampart?"
Thanks,
--Glen
On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org
Re: [VOTE] Release WSS4J 1.5.9 [attn Rampart devs]
Posted by Glen Daniels <gl...@thoughtcraft.com>.
Hi Colm, all,
Thanks for the push of this release - I'll take a look at the artifacts later
this afternoon. One question to you and to the Rampart devs, which is of
course "has this been tested with Rampart?"
Thanks,
--Glen
On 9/27/2010 11:57 AM, Colm O hEigeartaigh wrote:
> To the Apache Web Services Community,
>
> This is a call for votes for the wss4j-1.5.9 release. It's been well
> over a year since 1.5.8 was released, and 32 bugs have been fixed in
> 1.5.9.
>
> The distribution can be found at the following URL:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/dist/
>
> You can also point maven at the following URL to pull down the 1.5.9
> release POM, source, and class JARs:
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/maven/
>
> Additionally, the generated version of the web site can be found at
>
> http://people.apache.org/~coheigea/stage/wss4j/1.5.9/site/
>
> This vote will stay open for at least 72 hours.
>
> Here is my (non-binding and advisory) +1.
>
> Thanks,
>
> Colm.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: wss4j-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: wss4j-dev-help@ws.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: java-dev-unsubscribe@axis.apache.org
For additional commands, e-mail: java-dev-help@axis.apache.org