You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by ad...@apache.org on 2016/06/17 23:39:34 UTC
[49/63] [abbrv] [partial] incubator-mynewt-site git commit: remove
untarred files for openocd
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/README.Windows
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/README.Windows b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/README.Windows
deleted file mode 100755
index 6c616f3..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/README.Windows
+++ /dev/null
@@ -1,60 +0,0 @@
-Building OpenOCD for Windows
-----------------------------
-
-You can build OpenOCD for Windows natively with either MinGW-w64/MSYS
-or Cygwin (plain MinGW might work with --disable-werror but is not
-recommended as it doesn't provide enough C99 compatibility).
-Alternatively, one can cross-compile it using MinGW-w64 on a *nix
-host. See README for the generic instructions.
-
-Also, the MSYS2 project provides both ready-made binaries and an easy
-way to self-compile from their software repository out of the box.
-
-Native MinGW-w64/MSYS compilation
------------------------------
-
-As MSYS doesn't come with pkg-config pre-installed, you need to add it
-manually. The easiest way to do that is to download pkg-config-lite
-from:
-
- http://sourceforge.net/projects/pkgconfiglite/
-
-Then simply unzip the archive to the root directory of your MinGW-w64
-installation.
-
-USB adapters
-------------
-
-For the adapters that use a HID-based protocol, e.g. CMSIS-DAP, you do
-not need to perform any additional configuration.
-
-For all the others you usually need to have WinUSB.sys (or
-libusbK.sys) driver installed. Some vendor software (e.g. for
-ST-LINKv2) does it on its own. For the other cases the easiest way to
-assign WinUSB to a device is to use the latest Zadig installer:
-
- http://zadig.akeo.ie
-
-When using a composite USB device, it's often necessary to assign
-WinUSB.sys to the composite parent instead of the specific
-interface. To do that one needs to activate an advanced option in the
-Zadig installer.
-
-For the old drivers that use libusb-0.1 API you might need to link
-against libusb-win32 headers and install the corresponding driver with
-Zadig.
-
-If you need to use the same adapter with other applications that may
-require another driver, a solution for Windows Vista and above is to
-activate the IgnoreHWSerNum registry setting for the USB device.
-
-That setting forces Windows to associate the driver per port instead of
-per serial number, the same behaviour as when the device does not contain
-a serial number. So different drivers can be installed for the adapter on
-different ports and you just need to plug the adapter into the correct
-port depending on which application to use.
-
-For more information, see:
-
- http://msdn.microsoft.com/en-us/library/windows/hardware/jj649944(v=vs.85).aspx
- http://www.ftdichip.com/Support/Knowledgebase/index.html?ignorehardwareserialnumber.htm
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/TODO
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/TODO b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/TODO
deleted file mode 100755
index 8aac157..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/TODO
+++ /dev/null
@@ -1,380 +0,0 @@
-// This file is part of the Doxygen Developer Manual
-/** @page tasks Pending and Open Tasks
-
-This page lists pending and open tasks being considered or worked upon
-by the OpenOCD community.
-
-@section thelist The List
-
-Most items are open for the taking, but please post to the mailing list
-before spending much time working on anything lists here. The community
-may have evolved an idea since it was added here.
-
-Feel free to send patches to add or clarify items on this list, too.
-
-@section thelisttcl TCL
-
-This section provides possible things to improve with OpenOCD's TCL support.
-
-- Fix problem with incorrect line numbers reported for a syntax
- error in a reset init event.
-
-- organize the TCL configurations:
- - provide more directory structure for boards/targets?
- - factor configurations into layers (encapsulation and re-use)
-
-- Fix handling of variables between multiple command line "-c" and "-f"
- parameters. Currently variables assigned through one such parameter
- command/script are unset before the next one is invoked.
-
-- Isolate all TCL command support:
- - Pure C CLI implementations using --disable-builtin-tcl.
- - Allow developers to build new dongles using OpenOCD's JTAG core.
- - At first, provide only low-level JTAG support; target layer and
- above rely heavily on scripting event mechanisms.
- - Allow full TCL support? add --with-tcl=/path/to/installed/tcl
- - Move TCL support out of foo.[ch] and into foo_tcl.[ch] (other ideas?)
- - See src/jtag/core.c and src/jtag/tcl.c for an example.
- - allow some of these TCL command modules to be dynamically loadable?
-
-@section thelistjtag JTAG
-
-This section list issues that need to be resolved in the JTAG layer.
-
-@subsection thelistjtagcore JTAG Core
-
-The following tasks have been suggested for cleaning up the JTAG layer:
-
-- use tap_set_state everywhere to allow logging TAP state transitions
-- Encapsulate cmd_queue_cur_state and related variable handling.
-- add slick 32 bit versions of jtag_add_xxx_scan() that avoids
-buf_set_u32() calls and other evidence of poor impedance match between
-API and calling code. New API should cut down # of lines in calling
-code by 100's and make things clearer. Also potentially be supported
-directly in minidriver API for better embedded host performance.
-
-The following tasks have been suggested for adding new core JTAG support:
-
-- Improve autodetection of TAPs by supporting tcl escape procedures that
- can configure discovered TAPs based on IDCODE value ... they could:
- - Remove guessing for irlen
- - Allow non-default irmask/ircapture values
-- SPI/UART emulation:
- - (ab)use bit-banging JTAG interfaces to emulate SPI/UART
- - allow SPI to program flash, MCUs, etc.
-
-@subsection thelistjtaginterfaces JTAG Interfaces
-
-There are some known bugs to fix in JTAG adapter drivers:
-
-- For JTAG_STATEMOVE to TAP_RESET, all drivers must ignore the current
- recorded state. The tap_get_state() call won't necessarily return
- the correct value, especially at server startup. Fix is easy: in
- that case, always issue five clocks with TMS high.
- - amt_jtagaccel.c
- - arm-jtag-ew.c
- - bitbang.c
- - bitq.c
- - gw16012.c
- - jlink.c
- - usbprog.c
- - vsllink.c
- - rlink/rlink.c
-- bug: USBprog is broken with new tms sequence; it needs 7-clock cycles.
- Fix promised from Peter Denison openwrt at marshadder.org
- Workaround: use "tms_sequence long" @par
- https://lists.berlios.de/pipermail/openocd-development/2009-July/009426.html
-
-The following tasks have been suggested for improving OpenOCD's JTAG
-interface support:
-
-- rework USB communication to be more robust. Two possible options are:
- -# use libusb-1.0.1 with libusb-compat-0.1.1 (non-blocking I/O wrapper)
- -# rewrite implementation to use non-blocking I/O
-- J-Link driver:
- - fix to work with long scan chains, such as R.Doss's svf test.
-- FT2232 (libftdi):
- - make performance comparable to alternatives (on Win32, D2XX is faster)
- - make usability comparable to alternatives
-- Autodetect USB based adapters; this should be easy on Linux. If there's
- more than one, list the options; otherwise, just select that one.
-
-The following tasks have been suggested for adding new JTAG interfaces:
-
-- TCP driver: allow client/server for remote JTAG interface control.
-This requires a client and a server. The server is built into the
-normal OpenOCD and takes commands from the client and executes
-them on the interface returning the result of TCP/IP. The client
-is an OpenOCD which is built with a TCP/IP minidriver. The use
-of a minidriver is required to capture all the jtag_add_xxx()
-fn's at a high enough level and repackage these cmd's as
-TCP/IP packets handled by the server.
-
-@section thelistswd Serial Wire Debug
-
-- implement Serial Wire Debug interface
-
-@section thelistbs Boundary Scan Support
-
-- add STAPL support?
-- add BSDL support?
-
-A few possible options for the above:
- -# Fake a TCL equivalent?
- -# Integrate an existing library?
- -# Write a new C implementation a la Jim?
-
-Once the above are completed:
-- add support for programming flash using boundary scan techniques
-- add integration with a modified gerber view program:
- - provide means to view the PCB and select pins and traces
- - allow use-cases such as the following:
- - @b Stimulus
- -# Double-click on a pin (or trace) with the mouse.
- - @b Effects
- -# The trace starts blinking, and
- -# OpenOCD toggles the pin(s) 0/1.
-
-@section thelisttargets Target Support
-
-- Many common ARM cores could be autodetected using IDCODE
-- general layer cleanup: @par
- https://lists.berlios.de/pipermail/openocd-development/2009-May/006590.html
-- regression: "reset halt" between 729(works) and 788(fails): @par
-https://lists.berlios.de/pipermail/openocd-development/2009-July/009206.html
-- registers
- - add flush-value operation, call them all on resume/reset
-- mcr/mrc target->type support
- - missing from ARM920t, ARM966e, XScale.
- It's possible that the current syntax is unable to support read-modify-write
- operations(see arm966e).
- - mcr/mrc - retire cp15 commands when there the mrc/mrc commands have been
- tested from: arm926ejs, arm720t, cortex_a8
-- ARM7/9:
- - clean up "arm9tdmi vector_catch". Available for some arm7 cores? @par
-https://lists.berlios.de/pipermail/openocd-development/2009-October/011488.html
-https://lists.berlios.de/pipermail/openocd-development/2009-October/011506.html
- - add reset option to allow programming embedded ice while srst is asserted.
- Some CPUs will gate the JTAG clock when srst is asserted and in this case,
- it is necessary to program embedded ice and then assert srst afterwards.
-- ARM926EJS:
- - reset run/halt/step is not robust; needs testing to map out problems.
-- ARM11 improvements (MB?)
- - add support for asserting srst to reset the core.
- - Single stepping works, but should automatically
- use hardware stepping if available.
- - mdb can return garbage data if read byte operation fails for
- a memory region(16 & 32 byte access modes may be supported). Is this
- a bug in the .MX31 PDK init script? Try on i.MX31 PDK:
- mdw 0xb80005f0 0x8, mdh 0xb80005f0 0x10, mdb 0xb80005f0 0x20. mdb returns
- garabage.
- - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...)
-- Thumb2 single stepping: ARM1156T2 needs simulator support
-- Cortex A8 support (ML)
- - add target implementation (ML)
-- Cortex M3 support
- - when stepping, only write dirtied registers (be faster)
- - when connecting to halted core, fetch registers (startup is quirky)
-- Generic ARM run_algorithm() interface
- - tagged struct wrapping ARM instructions and metadata
- - not revision-specific (current: ARMv4+ARMv5 -or- ARMv6 -or- ARMv7)
- - usable with at least arm_nandwrite() and generic CFI drivers
-- ETM
- - don't show FIFOFULL registers if they're not supported
- - use comparators to get more breakpoints and watchpoints
- - add "etm drivers" command
- - trace driver init() via examine() paths only, not setup()/reset
-- MC1322x support (JW/DE?)
- - integrate and test support from JW (and DE?)
- - get working with a known good interface (i.e. not today's jlink)
-- AT91SAM92xx:
- - improvements for unknown-board-atmel-at91sam9260.cfg (RD)
-- STR9x: (ZW)
- - improvements to str912.cfg to be more general purpose
-- AVR: (SQ)
- - independently verify implementation
- - incrementally improve working prototype in trunk. (SQ)
- - work out how to debug this target
- - AVR debugging protocol.
-- FPGA:
- - Altera Nios Soft-CPU support
-- Coldfire (suggested by NC)
- - can we draw from the BDM project? @par
- http://bdm.sourceforge.net/
-
- or the OSBDM package @par
- http://forums.freescale.com/freescale/board/message?board.id=OSBDM08&thread.id=422
-
-@section thelistsvf SVF/XSVF
-
-- develop SVF unit tests
-- develop XSVF unit tests
-
-@section thelistflash Flash Support
-
-- finish documentation for the following flash drivers:
- - avr
- - pic32mx
- - ocl
- - str9xpec
-
-- Don't expect writing all-ones to be a safe way to write without
- changing bit values. Minimally it loses on flash modules with
- internal ECC, where it may change the ECC.
- - NOR flash_write_unlock() does that between sectors
- - there may be other cases too
-
-- Make sure all commands accept either a bank name or a bank number,
- and be sure both identifiers show up in "flash banks" and "nand list".
- Right now the user-friendly names are pretty much hidden...
-
-@subsection thelistflashcfi CFI
-
-- finish implementing bus width/chip width handling (suggested by NC)
-- factor vendor-specific code into separate source files
- - add new callback interface for vendor-specific code
-- investigate/implement "thin wrapper" to use eCos CFI drivers (�H)
-
-@section thelistdebug Debugger Support
-
-- add support for masks in watchpoints? @par
- https://lists.berlios.de/pipermail/openocd-development/2009-October/011507.html
-- breakpoints can get lost in some circumstances: @par
- https://lists.berlios.de/pipermail/openocd-development/2009-June/008853.html
-- add support for masks in watchpoints. The trick is that GDB does not
- support a breakpoint mask in the remote protocol. One way to work around
- this is to add a separate command "watchpoint_mask add/rem <addr> <mask>", that
- is run to register a list of masks that the gdb_server knows to use with
- a particular watchpoint address.
-- integrate Keil AGDI interface to OpenOCD? (submitted by Dario Vecchio)
-
-@section thelisttesting Testing Suite
-
-This section includes several related groups of ideas:
-- @ref thelistunittests
-- @ref thelistsmoketests
-- @ref thelisttestreports
-- @ref thelisttestgenerichw
-
-@subsection thelistunittests Unit Tests
-
-- add testing skeleton to provide frameworks for adding tests
-- implement server unit tests
-- implement JTAG core unit tests
-- implement JTAG interface unit tests
-- implement flash unit tests
-- implement target unit tests
-
-@subsection thelistsmoketests Smoke Test Tools
-
--# extend 'make check' with a smoketest app
- - checks for OOCD_TEST_CONFIG, etc. in environment (or config file)
- - if properly set, runs the smoke test with specified parameters
- - openocd -f ${OOCD_TEST_CONFIG}
- - implies a modular test suite (see below)
- - should be able to run some minimal tests with dummy interface:
- - compare results of baseline sanity checks with expected results
-
--# builds a more complete test suite:
- - existing testing/examples/ look like a great start
- - all targets should be tested fully and for all capabilities
- - we do NOT want a "lowest common denominator" test suite
- - ... but can we start with one to get going?
- - probably requires one test configuration file per board/target
- - modularization can occur here, just like with targets/boards/chips
- - coverage can increase over time, building up bundles of tests
-
--# add new 'smoketest' Makefile target:
- - calls 'make check' (and the smoketest app)
- - gather inputs and output into a report file
-
-@subsection thelisttestreports Test Feedback Tools
-
-These ideas were first introduced here: @par
- https://lists.berlios.de/pipermail/openocd-development/2009-May/006358.html
-
-- provide report submission scripts for e-mail and web forms
-- add new Makefile targets to post the report:
- - 'checkreportsend' -- send to list via e-mail (via sendmail)
- - 'checkreportpost' -- send web form (via curl or other script)
-
-@subsection thelisttestgenerichw Generic Hardware Tester
-
-- implement VHDL to use for FPGA-based JTAG TAP testing device
-- develop test suite that utilizes this testing device
-
-@section thelistautotools Autotools Build System
-
-- make entire configure process require less user consideration:
- - automatically detect the features that are available, unless
- options were specifically provided to configure
- - provide a report of the drivers that will be build at the end of
- running configure, so the users can verify which drivers will be
- built during 'make' (and their options) .
-- eliminate sources of confusion in @c bootstrap script:
- -# Make @c bootstrap call 'configure --enable-maintainer-mode \<opts\>'?
- -# Add @c buildstrap script to assist with bootstrap and configure steps.
-- automatically build tool-chains required for cross-compiling
- - produce mingw32, arm-elf, others using in-tree scripts
- - build all required target code from sources
-- make JTAG and USB debug output a run-time configuration option
-
-@section thelistarchitecture Architectural Tasks
-
-The following architectural tasks need to be accomplished and should be
-fairly easy to complete:
-
-
-- use dynamic allocations for working memory. Scan & fix code
-for excessive stack allocations. take linux/scripts/checkstack.pl and
-see what the worst offenders are. Dynamic stack allocations are found
-at the bottom of the list below. Example, on amd64:
-
- $ objdump -d | checkstack.pl | head -10
- 0x004311e3 image_open [openocd]: 13464
- 0x00431301 image_open [openocd]: 13464
- 0x004237a4 target_array2mem [openocd]: 4376
- 0x0042382b target_array2mem [openocd]: 4376
- 0x00423e74 target_mem2array [openocd]: 4360
- 0x00423ef9 target_mem2array [openocd]: 4360
- 0x00404aed handle_svf_command [openocd]: 2248
- 0x00404b7e handle_svf_command [openocd]: 2248
- 0x00413581 handle_flash_fill_command [openocd]: 2200
- 0x004135fa handle_flash_fill_command [openocd]: 2200
-- clean-up code to match style guides
-- factor code to eliminate duplicated functionality
-- rewrite code that uses casts to access 16-bit and larger types
- from unaligned memory addresses
-- libopenocd support: @par
- https://lists.berlios.de/pipermail/openocd-development/2009-May/006405.html
-- review and clean up interface/target/flash APIs
-
-The following strategic tasks will require ambition, knowledge, and time
-to complete:
-
-- overhaul use of types to improve 32/64-bit portability
- - types for both host and target word sizes?
- - can we use GDB's CORE_TYPE support?
-- Allow N:M:P mapping of servers, targets, and interfaces
-- loadable module support for interface/target/flash drivers and commands
- - support both static and dynamic modules.
- - should probably use libltdl for dynamic library handing.
-
-@section thelistadmin Documentation Tasks
-
-- Develop milestone and release guidelines, processes, and scripts.
-- Develop "style" guidelines (and scripts) for maintainers:
- - reviewing patches
- - committing to git
-- Review Users' Guide for documentation errors or omissions
- - "capture" and "ocd_find" commands
- - "ocd_" prefix on various stuff
-- Update Developer's Manual (doxygen output)
- - Add documentation describing the architecture of each module
- - Provide more Technical Primers to bootstrap contributor knowledge
-
-*/
-/** @file
-This file contains the @ref thelist page.
-*/
-
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/bootstrap
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/bootstrap b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/bootstrap
deleted file mode 100755
index 3b60fc6..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/bootstrap
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-# Run the autotools bootstrap sequence to create the configure script
-
-# Abort execution on error
-set -e
-
-if which libtoolize > /dev/null; then
- libtoolize="libtoolize"
-elif which glibtoolize >/dev/null; then
- libtoolize="glibtoolize"
-else
- echo "$0: Error: libtool is required" >&2
- exit 1
-fi
-
-if [ "$1" = "nosubmodule" ]; then
- SKIP_SUBMODULE=1
-elif [ -n "$1" ]; then
- echo "$0: Illegal argument $1"
- echo "USAGE: $0 [nosubmodule]"
- exit 1
-fi
-
-# bootstrap the autotools
-(
-set -x
-aclocal
-${libtoolize} --automake --copy
-autoconf
-autoheader
-automake --gnu --add-missing --copy
-)
-
-if [ -n "$SKIP_SUBMODULE" ]; then
- echo "Skipping submodule setup"
-else
- echo "Setting up submodules"
- git submodule init
- git submodule update
-fi
-
-echo "Bootstrap complete. Quick build instructions:"
-echo "./configure ...."
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/common.mk
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/common.mk b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/common.mk
deleted file mode 100755
index f301c3a..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/common.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-
-# common flags used in openocd build
-AM_CPPFLAGS = -I$(top_srcdir)/src \
- -I$(top_builddir)/src \
- -I$(top_srcdir)/src/helper \
- -DPKGDATADIR=\"$(pkgdatadir)\" \
- -DBINDIR=\"$(bindir)\"
-
-if INTERNAL_JIMTCL
-AM_CPPFLAGS += -I$(top_srcdir)/jimtcl \
- -I$(top_builddir)/jimtcl
-endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/config_subdir.m4
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/config_subdir.m4 b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/config_subdir.m4
deleted file mode 100755
index 1c79098..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/config_subdir.m4
+++ /dev/null
@@ -1,26 +0,0 @@
-dnl
-dnl If needed, define the m4_ifblank and m4_ifnblank macros from autoconf 2.64
-dnl This allows us to run with earlier Autoconfs as well.
-ifdef([m4_ifblank],[],[
-m4_define([m4_ifblank],
-[m4_if(m4_translit([[$1]], [ ][ ][
-]), [], [$2], [$3])])])
-dnl
-ifdef([m4_ifnblank],[],[
-m4_define([m4_ifnblank],
-[m4_if(m4_translit([[$1]], [ ][ ][
-]), [], [$3], [$2])])])
-dnl
-
-dnl AC_CONFIG_SUBDIRS does not allow configure options to be passed
-dnl to subdirs, this function allows that by creating a configure.gnu
-dnl script that prepends configure options and then calls the real
-dnl configure script
-AC_DEFUN([AX_CONFIG_SUBDIR_OPTION],
-[
-AC_CONFIG_SUBDIRS([$1])
-
-m4_ifblank([$2], [rm -f $srcdir/$1/configure.gnu],
-[echo -e '#!/bin/sh\nexec "`dirname "'\$'0"`/configure" $2 "'\$'@"' > "$srcdir/$1/configure.gnu"
-])
-])
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/configure.ac
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/configure.ac b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/configure.ac
deleted file mode 100755
index aed8bce..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/configure.ac
+++ /dev/null
@@ -1,1343 +0,0 @@
-AC_PREREQ(2.64)
-AC_INIT([openocd], [0.10.0-dev],
- [OpenOCD Mailing List <op...@lists.sourceforge.net>])
-AC_CONFIG_SRCDIR([src/openocd.c])
-
-m4_include([config_subdir.m4])dnl
-
-# check for makeinfo before calling AM_INIT_AUTOMAKE
-AC_CHECK_PROG([MAKEINFO], [makeinfo], [makeinfo])
-if test "x$MAKEINFO" = "x"; then
- MAKEINFO='echo makeinfo missing; true'
- AC_MSG_WARN([Info documentation will not be built.])
-fi
-AC_SUBST([MAKEINFO])
-
-AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip subdir-objects])
-
-AC_CONFIG_HEADERS([config.h])
-AH_BOTTOM([
-#include <helper/system.h>
-#include <helper/types.h>
-#include <helper/replacements.h>
-])
-
-AC_LANG_C
-AC_PROG_CC
-AC_PROG_CC_C99
-AM_PROG_CC_C_O
-AC_PROG_RANLIB
-PKG_PROG_PKG_CONFIG([0.23])
-
-dnl disable checks for C++, Fortran and GNU Java Compiler
-m4_defun([_LT_AC_LANG_CXX_CONFIG], [:])
-m4_defun([_LT_AC_LANG_F77_CONFIG], [:])
-m4_defun([_LT_AC_LANG_GCJ_CONFIG], [:])
-AC_DISABLE_SHARED
-AC_PROG_LIBTOOL
-AC_SUBST([LIBTOOL_DEPS])
-
-dnl configure checks required for Jim files (these are obsolete w/ C99)
-AC_C_CONST
-AC_TYPE_LONG_LONG_INT
-
-AC_SEARCH_LIBS([ioperm], [ioperm])
-AC_SEARCH_LIBS([dlopen], [dl])
-
-AC_CHECK_HEADERS([sys/socket.h])
-AC_CHECK_HEADERS([arpa/inet.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
-AC_CHECK_HEADERS([elf.h])
-AC_CHECK_HEADERS([dirent.h])
-AC_CHECK_HEADERS([fcntl.h])
-AC_CHECK_HEADERS([ifaddrs.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
-AC_CHECK_HEADERS([malloc.h])
-AC_CHECK_HEADERS([netdb.h])
-AC_CHECK_HEADERS([netinet/in.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
-AC_CHECK_HEADERS([netinet/tcp.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
-AC_CHECK_HEADERS([poll.h])
-AC_CHECK_HEADERS([pthread.h])
-AC_CHECK_HEADERS([strings.h])
-AC_CHECK_HEADERS([sys/ioctl.h])
-AC_CHECK_HEADERS([sys/param.h])
-AC_CHECK_HEADERS([sys/select.h])
-AC_CHECK_HEADERS([sys/stat.h])
-AC_CHECK_HEADERS([sys/time.h])
-AC_CHECK_HEADERS([sys/types.h])
-AC_CHECK_HEADERS([unistd.h])
-AC_CHECK_HEADERS([net/if.h], [], [], [dnl
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-])
-
-AC_HEADER_ASSERT
-AC_HEADER_STDBOOL
-AC_HEADER_TIME
-
-AC_C_BIGENDIAN
-
-AC_CHECK_FUNCS([strndup])
-AC_CHECK_FUNCS([strnlen])
-AC_CHECK_FUNCS([gettimeofday])
-AC_CHECK_FUNCS([usleep])
-AC_CHECK_FUNCS([vasprintf])
-
-build_bitbang=no
-build_bitq=no
-is_cygwin=no
-is_mingw=no
-is_win32=no
-is_darwin=no
-
-# guess-rev.sh only exists in the repository, not in the released archives
-AC_MSG_CHECKING([whether to build a release])
-if test -x $srcdir/guess-rev.sh ; then
- build_release=no
-else
- build_release=yes
-fi
-AC_MSG_RESULT([$build_release])
-
-AC_ARG_WITH(ftd2xx,
- AS_HELP_STRING([--with-ftd2xx=<PATH>],[This option has been removed.]),
- [
-# Option Given.
-cat << __EOF__
-
-The option: --with-ftd2xx=<PATH> has been removed.
-On Linux, the new option is:
-
- --with-ftd2xx-linux-tardir=/path/to/files
-
-Where <path> is the path the the directory where the "tar.gz" file
-from FTDICHIP.COM was unpacked, for example:
-
- --with-ftd2xx-linux-tardir=${HOME}/libftd2xx0.4.16
-
-On Cygwin/MingW32, the new option is:
-
- --with-ftd2xx-win32-zipdir=/path/to/files
-
-Where <path> is the path to the directory where the "zip" file from
-FTDICHIP.COM was unpacked, for example:
-
- --with-ftd2xx-win32-zipdir=${HOME}/ftd2xx.cdm.files
-
-__EOF__
-
- AC_MSG_ERROR([Sorry Cannot continue])
- ], [true])
-
-# Adapter drivers
-# 1st column -- configure option
-# 2nd column -- description
-# 3rd column -- symbol used for both config.h and automake
-m4_define([ADAPTER_ARG], [m4_argn([1], $1)])
-m4_define([ADAPTER_DESC], [m4_argn([2], $1)])
-m4_define([ADAPTER_SYM], [m4_argn([3], $1)])
-m4_define([ADAPTER_VAR], [enable_[]ADAPTER_ARG($1)])
-m4_define([ADAPTER_OPT], [m4_translit(ADAPTER_ARG($1), [_], [-])])
-
-m4_define([USB1_ADAPTERS],
- [[[ftdi], [MPSSE mode of FTDI based devices], [FTDI]],
- [[jlink], [Segger J-Link JTAG Programmer], [JLINK]],
- [[stlink], [ST-Link JTAG Programmer], [HLADAPTER_STLINK]],
- [[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]],
- [[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
- [[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
- [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]]])
-
-m4_define([USB_ADAPTERS],
- [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
- [[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]],
- [[aice], [Andes JTAG Programmer], [AICE]]])
-
-m4_define([USB0_ADAPTERS],
- [[[usbprog], [USBProg JTAG Programmer], [USBPROG]],
- [[rlink], [Raisonance RLink JTAG Programmer], [RLINK]],
- [[armjtagew], [Olimex ARM-JTAG-EW Programmer], [ARMJTAGEW]]])
-
-m4_define([HIDAPI_ADAPTERS],
- [[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]]])
-
-#========================================
-# FTD2XXX support comes in 4 forms.
-# (1) win32 - via a zip file
-# (2) linux - via a tar file
-# (3) linux/cygwin/mingw - via libftdi
-# (4) darwin - installed under /usr/local
-#
-# In case (1) and (2) we need to know where the package was unpacked.
-
-AC_ARG_WITH(ftd2xx-win32-zipdir,
- AS_HELP_STRING([--with-ftd2xx-win32-zipdir],[Where (CYGWIN/MINGW) the zip file from ftdichip.com was unpacked (default=search)]),
- [
- # option present
- if test -d $with_ftd2xx_win32_zipdir
- then
- with_ftd2xx_win32_zipdir=`cd $with_ftd2xx_win32_zipdir && pwd`
- AC_MSG_NOTICE([Using: ftdichip.com library: $with_ftd2xx_win32_zipdir])
- else
- AC_MSG_ERROR([Parameter to --with-ftd2xx-win32-zipdir is not a dir: $with_ftd2xx_win32_zipdir])
- fi
- ], [true])
-
-AC_ARG_WITH(ftd2xx-linux-tardir,
- AS_HELP_STRING([--with-ftd2xx-linux-tardir], [Where (Linux/Unix) the tar file from ftdichip.com was unpacked (default=search)]),
- [
- # Option present
- if test $is_win32 = yes ; then
- AC_MSG_ERROR([The option: --with-ftd2xx-linux-tardir is only usable on linux])
- fi
- if test -d $with_ftd2xx_linux_tardir
- then
- with_ftd2xx_linux_tardir=`cd $with_ftd2xx_linux_tardir && pwd`
- AC_MSG_NOTICE([Using: ftdichip.com library: $with_ftd2xx_linux_tardir])
- else
- AC_MSG_ERROR([Parameter to --with-ftd2xx-linux-tardir is not a dir: $with_ftd2xx_linux_tardir])
- fi
- ], [true])
-
-AC_ARG_WITH(ftd2xx-lib,
- AS_HELP_STRING([--with-ftd2xx-lib],
- [Use static or shared ftd2xx libs (default=static)]),
- [
- case "$withval" in
- static)
- with_ftd2xx_lib=$withval
- ;;
- shared)
- with_ftd2xx_lib=$withval
- ;;
- *)
- AC_MSG_ERROR([Option: --with-ftd2xx-lib=static or --with-ftd2xx-lib=shared not, $withval])
- ;;
- esac
- ], [
- # Default is static - it is simpler :-(
- with_ftd2xx_lib=static
- ])
-
-AC_ARG_ENABLE([doxygen-html],
- AS_HELP_STRING([--disable-doxygen-html],
- [Disable building Doxygen manual as HTML.]),
- [doxygen_as_html=$enableval], [doxygen_as_html=yes])
-AC_SUBST([doxygen_as_html])
-AC_MSG_CHECKING([whether to build Doxygen as HTML])
-AC_MSG_RESULT([$doxygen_as_html])
-
-AC_ARG_ENABLE([doxygen-pdf],
- AS_HELP_STRING([--enable-doxygen-pdf],
- [Enable building Doxygen manual as PDF.]),
- [doxygen_as_pdf=$enableval], [doxygen_as_pdf=no])
-AC_SUBST([doxygen_as_pdf])
-AC_MSG_CHECKING([whether to build Doxygen as PDF])
-AC_MSG_RESULT([$doxygen_as_pdf])
-
-AC_ARG_ENABLE([gccwarnings],
- AS_HELP_STRING([--disable-gccwarnings], [Disable compiler warnings]),
- [gcc_warnings=$enableval], [gcc_warnings=yes])
-
-AC_ARG_ENABLE([wextra],
- AS_HELP_STRING([--disable-wextra], [Disable extra compiler warnings]),
- [gcc_wextra=$enableval], [gcc_wextra=$gcc_warnings])
-
-AC_ARG_ENABLE([werror],
- AS_HELP_STRING([--disable-werror], [Do not treat warnings as errors]),
- [gcc_werror=$enableval], [gcc_werror=$gcc_warnings])
-
-# set default verbose options, overridden by following options
-debug_jtag_io=no
-debug_usb_io=no
-debug_usb_comms=no
-
-AC_ARG_ENABLE([verbose],
- AS_HELP_STRING([--enable-verbose],
- [Enable verbose JTAG I/O messages (for debugging).]),
- [
- debug_jtag_io=$enableval
- debug_usb_io=$enableval
- debug_usb_comms=$enableval
- ], [])
-
-AC_ARG_ENABLE([verbose_jtag_io],
- AS_HELP_STRING([--enable-verbose-jtag-io],
- [Enable verbose JTAG I/O messages (for debugging).]),
- [debug_jtag_io=$enableval], [])
-
-AC_ARG_ENABLE([verbose_usb_io],
- AS_HELP_STRING([--enable-verbose-usb-io],
- [Enable verbose USB I/O messages (for debugging)]),
- [debug_usb_io=$enableval], [])
-
-AC_ARG_ENABLE([verbose_usb_comms],
- AS_HELP_STRING([--enable-verbose-usb-comms],
- [Enable verbose USB communication messages (for debugging)]),
- [debug_usb_comms=$enableval], [])
-
-AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]);
-AC_MSG_RESULT([$debug_jtag_io])
-if test $debug_jtag_io = yes; then
- AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages])
-fi
-
-AC_MSG_CHECKING([whether to enable verbose USB I/O messages]);
-AC_MSG_RESULT([$debug_usb_io])
-if test $debug_usb_io = yes; then
- AC_DEFINE([_DEBUG_USB_IO_],[1], [Print verbose USB I/O messages])
-fi
-
-AC_MSG_CHECKING([whether to enable verbose USB communication messages]);
-AC_MSG_RESULT([$debug_usb_comms])
-if test $debug_usb_comms = yes; then
- AC_DEFINE([_DEBUG_USB_COMMS_],[1], [Print verbose USB communication messages])
-fi
-
-debug_malloc=no
-AC_ARG_ENABLE([malloc_logging],
- AS_HELP_STRING([--enable-malloc-logging],
- [Include free space in logging messages (requires malloc.h).]),
- [debug_malloc=$enableval], [])
-
-AC_MSG_CHECKING([whether to enable malloc free space logging]);
-AC_MSG_RESULT([$debug_malloc])
-if test $debug_malloc = yes; then
- AC_DEFINE([_DEBUG_FREE_SPACE_],[1], [Include malloc free space in logging])
-fi
-
-AC_ARG_ENABLE([dummy],
- AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
- [build_dummy=$enableval], [build_dummy=no])
-
-m4_define([AC_ARG_ADAPTERS], [
- m4_foreach([adapter], [$1],
- [AC_ARG_ENABLE(ADAPTER_OPT([adapter]),
- AS_HELP_STRING([--enable-ADAPTER_OPT([adapter])],
- [Enable building support for the ]ADAPTER_DESC([adapter])[ (default is $2)]),
- [], [ADAPTER_VAR([adapter])=$2])
- ])
-])
-
-AC_ARG_ADAPTERS([USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS, HIDAPI_ADAPTERS], [auto])
-
-AC_ARG_ENABLE([parport],
- AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]),
- [build_parport=$enableval], [build_parport=no])
-
-AC_ARG_ENABLE([parport_ppdev],
- AS_HELP_STRING([--disable-parport-ppdev],
- [Disable use of ppdev (/dev/parportN) for parport (for x86 only)]),
- [parport_use_ppdev=$enableval], [parport_use_ppdev=yes])
-
-AC_ARG_ENABLE([parport_giveio],
- AS_HELP_STRING([--enable-parport-giveio],
- [Enable use of giveio for parport (for CygWin only)]),
- [parport_use_giveio=$enableval], [parport_use_giveio=])
-
-AC_ARG_ENABLE([ft2232_libftdi], [], [
-if test $enableval = yes; then
- AC_MSG_ERROR([The ft2232 driver is deprecated, use --enable-ftdi to build its replacement, or force the old driver with --enable-legacy-ft2232_libftdi])
-fi
-])
-
-AC_ARG_ENABLE([ft2232_ftd2xx], [], [
-if test $enableval = yes; then
- AC_MSG_ERROR([The ft2232 driver is deprecated, use --enable-ftdi to build its replacement, or force the old driver with --enable-legacy-ft2232_ftd2xx])
-fi
-])
-
-AC_ARG_ENABLE([legacy-ft2232_libftdi],
- AS_HELP_STRING([--enable-legacy-ft2232_libftdi], [(DEPRECATED) Enable building support for FT2232 based devices using the libftdi library]),
- [build_ft2232_libftdi=$enableval], [build_ft2232_libftdi=no])
-
-AC_ARG_ENABLE([legacy-ft2232_ftd2xx],
- AS_HELP_STRING([--enable-legacy-ft2232_ftd2xx], [(DEPRECATED) Enable building support for FT2232 based devices using the D2XX library from ftdichip.com]),
- [build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no])
-
-AC_ARG_ENABLE([jtag_vpi],
- AS_HELP_STRING([--enable-jtag_vpi], [Enable building support for JTAG VPI]),
- [build_jtag_vpi=$enableval], [build_jtag_vpi=no])
-
-AC_ARG_ENABLE([usb_blaster_libftdi],
- AS_HELP_STRING([--enable-usb_blaster_libftdi], [Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX]),
- [build_usb_blaster_libftdi=$enableval], [build_usb_blaster_libftdi=no])
-
-AC_ARG_ENABLE([usb_blaster_ftd2xx],
- AS_HELP_STRING([--enable-usb_blaster_ftd2xx], [Enable building support for the Altera USB-Blaster using the FTD2XX driver from ftdichip.com]),
- [build_usb_blaster_ftd2xx=$enableval], [build_usb_blaster_ftd2xx=no])
-
-AC_ARG_ENABLE([amtjtagaccel],
- AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
- [build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
-
-AC_ARG_ENABLE([zy1000_master],
- AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]),
- [build_zy1000_master=$enableval], [build_zy1000_master=no])
-
-AC_ARG_ENABLE([zy1000],
- AS_HELP_STRING([--enable-zy1000], [Enable ZY1000 interface]),
- [build_zy1000=$enableval], [build_zy1000=no])
-
-AC_ARG_ENABLE([ioutil],
- AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
- [build_ioutil=$enableval], [build_ioutil=no])
-
-case "${host_cpu}" in
- arm*)
- AC_ARG_ENABLE([ep93xx],
- AS_HELP_STRING([--enable-ep93xx], [Enable building support for EP93xx based SBCs]),
- [build_ep93xx=$enableval], [build_ep93xx=no])
-
- AC_ARG_ENABLE([at91rm9200],
- AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
- [build_at91rm9200=$enableval], [build_at91rm9200=no])
-
- AC_ARG_ENABLE([bcm2835gpio],
- AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
- [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
- ;;
-
- *)
- build_ep93xx=no
- build_at91rm9200=no
- build_bcm2835gpio=no
- ;;
-esac
-
-AC_ARG_ENABLE([gw16012],
- AS_HELP_STRING([--enable-gw16012], [Enable building support for the Gateworks GW16012 JTAG Programmer]),
- [build_gw16012=$enableval], [build_gw16012=no])
-
-AC_ARG_ENABLE([presto_libftdi],
- AS_HELP_STRING([--enable-presto_libftdi], [Enable building support for ASIX Presto Programmer using the libftdi driver]),
- [build_presto_libftdi=$enableval], [build_presto_libftdi=no])
-
-AC_ARG_ENABLE([presto_ftd2xx],
- AS_HELP_STRING([--enable-presto_ftd2xx], [Enable building support for ASIX Presto Programmer using the FTD2XX driver]),
- [build_presto_ftd2xx=$enableval], [build_presto_ftd2xx=no])
-
-AC_ARG_ENABLE([openjtag_ftd2xx],
- AS_HELP_STRING([--enable-openjtag_ftd2xx], [Enable building support for the OpenJTAG Programmer with ftd2xx driver]),
- [build_openjtag_ftd2xx=$enableval], [build_openjtag_ftd2xx=no])
-
-AC_ARG_ENABLE([openjtag_ftdi],
- AS_HELP_STRING([--enable-openjtag_ftdi], [Enable building support for the OpenJTAG Programmer with ftdi driver]),
- [build_openjtag_ftdi=$enableval], [build_openjtag_ftdi=no])
-
-AC_ARG_ENABLE([oocd_trace],
- AS_HELP_STRING([--enable-oocd_trace],
- [Enable building support for some prototype OpenOCD+trace ETM capture hardware]),
- [build_oocd_trace=$enableval], [build_oocd_trace=no])
-
-AC_ARG_ENABLE([buspirate],
- AS_HELP_STRING([--enable-buspirate], [Enable building support for the Buspirate]),
- [build_buspirate=$enableval], [build_buspirate=no])
-
-AC_ARG_ENABLE([sysfsgpio],
- AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
- [build_sysfsgpio=$enableval], [build_sysfsgpio=no])
-
-AC_ARG_ENABLE([minidriver_dummy],
- AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
- [build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
-
-AC_ARG_ENABLE([internal-jimtcl],
- AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]),
- [use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes])
-
-AC_ARG_ENABLE([internal-libjaylink],
- AS_HELP_STRING([--disable-internal-libjaylink],
- [Disable building internal libjaylink]),
- [use_internal_libjaylink=$enableval], [use_internal_libjaylink=yes])
-
-build_minidriver=no
-AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
-if test $build_zy1000 = yes; then
- if test $build_minidriver = yes; then
- AC_MSG_ERROR([Multiple minidriver options have been enabled.])
- fi
- AC_DEFINE([HAVE_JTAG_MINIDRIVER_H], [1],
- [Define to 1 if you have the <jtag_minidriver.h> header file.])
- build_minidriver=yes
-fi
-AC_MSG_RESULT([$build_zy1000])
-
-AC_ARG_ENABLE([remote-bitbang],
- AS_HELP_STRING([--enable-remote-bitbang], [Enable building support for the Remote Bitbang jtag driver]),
- [build_remote_bitbang=$enableval], [build_remote_bitbang=no])
-
-AC_MSG_CHECKING([whether to enable dummy minidriver])
-if test $build_minidriver_dummy = yes; then
- if test $build_minidriver = yes; then
- AC_MSG_ERROR([Multiple minidriver options have been enabled.])
- fi
- build_minidriver=yes
- AC_DEFINE([BUILD_MINIDRIVER_DUMMY], [1], [Use the dummy minidriver.])
- AC_DEFINE([HAVE_JTAG_MINIDRIVER_H], [1],
- [Define to 1 if you have the <jtag_minidriver.h> header file.])
-fi
-AC_MSG_RESULT([$build_minidriver_dummy])
-
-AC_MSG_CHECKING([whether standard drivers can be built])
-if test "$build_minidriver" = yes; then
- AC_MSG_RESULT([no])
- AC_MSG_WARN([Using the minidriver disables all other drivers.])
- sleep 2
-else
- AC_MSG_RESULT([yes])
-fi
-
-case "${host_cpu}" in
- i?86|x86*)
- ;;
- *)
- if test x$parport_use_ppdev = xno; then
- AC_MSG_WARN([--disable-parport-ppdev is not supported by the host CPU])
- fi
- parport_use_ppdev=yes
- ;;
-esac
-
-case $host in
- *-cygwin*)
- is_win32=yes
- parport_use_ppdev=no
-
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [[return __MINGW32__;]])],
- [is_mingw=yes],[is_mingw=no])
- if test $is_mingw = yes; then
- AC_DEFINE([IS_MINGW], [1], [1 if building for MinGW.])
- if test x$parport_use_giveio = xno; then
- AC_MSG_WARN([--disable-parport-giveio is not supported by MinGW32 hosts])
- fi
- parport_use_giveio=yes
- is_cygwin=no
- else
- is_cygwin=yes
- AC_DEFINE([IS_CYGWIN], [1], [1 if building for Cygwin.])
- # sys/io.h needed under cygwin for parport access
- if test $build_parport = yes; then
- AC_CHECK_HEADERS([sys/io.h],[],AC_MSG_ERROR([Please install the cygwin ioperm package]))
- fi
- fi
-
- AC_DEFINE([IS_WIN32], [1], [1 if building for Win32.])
- AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
- ;;
- *-mingw*)
- is_mingw=yes
- is_win32=yes
- parport_use_ppdev=no
-
- if test x$parport_use_giveio = xno; then
- AC_MSG_WARN([--disable-parport-giveio is not supported by MinGW32 hosts])
- fi
- parport_use_giveio=yes
-
- if test x$build_buspirate = xyes; then
- AC_MSG_ERROR([buspirate currently not supported by MinGW32 hosts])
- fi
-
- CFLAGS="$CFLAGS -D__USE_MINGW_ANSI_STDIO"
-
- AC_DEFINE([IS_MINGW], [1], [1 if building for MinGW.])
- AC_DEFINE([IS_WIN32], [1], [1 if building for Win32.])
- AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
- ;;
- *darwin*)
- is_darwin=yes
-
- if test x$parport_use_giveio = xyes; then
- AC_MSG_WARN([--enable-parport-giveio cannot be used by Darwin hosts])
- fi
- parport_use_giveio=no
-
- AC_DEFINE([IS_CYGWIN], [0], [0 if not building for Cygwin.])
- AC_DEFINE([IS_WIN32], [0], [0 if not building for Win32.])
- AC_DEFINE([IS_DARWIN], [1], [1 if building for Darwin.])
- ;;
- *)
- if test x$parport_use_giveio = xyes; then
- AC_MSG_WARN([--enable-parport-giveio cannot be used by ]$host[ hosts])
- fi
- parport_use_giveio=no
- AC_DEFINE([IS_CYGWIN], [0], [0 if not building for Cygwin.])
- AC_DEFINE([IS_WIN32], [0], [0 if not building for Win32.])
- AC_DEFINE([IS_DARWIN], [0], [0 if not building for Darwin.])
- ;;
-esac
-
-if test $is_win32 = yes; then
- AC_DEFINE([WIN32_LEAN_AND_MEAN], [1], [1 to exclude old conflicting definitions when building on Windows])
-fi
-
-if test $build_parport = yes; then
- build_bitbang=yes
- AC_DEFINE([BUILD_PARPORT], [1], [1 if you want parport.])
-else
- AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
-fi
-
-if test $build_dummy = yes; then
- build_bitbang=yes
- AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.])
-else
- AC_DEFINE([BUILD_DUMMY], [0], [0 if you don't want dummy driver.])
-fi
-
-if test $build_ep93xx = yes; then
- build_bitbang=yes
- AC_DEFINE([BUILD_EP93XX], [1], [1 if you want ep93xx.])
-else
- AC_DEFINE([BUILD_EP93XX], [0], [0 if you don't want ep93xx.])
-fi
-
-if test $build_zy1000 = yes; then
- AC_DEFINE([BUILD_ZY1000], [1], [1 if you want ZY1000.])
-else
- AC_DEFINE([BUILD_ZY1000], [0], [0 if you don't want ZY1000.])
-fi
-
-if test $build_zy1000_master = yes; then
- AC_DEFINE([BUILD_ZY1000_MASTER], [1], [1 if you want ZY1000 JTAG master registers.])
-else
- AC_DEFINE([BUILD_ZY1000_MASTER], [0], [0 if you don't want ZY1000 JTAG master registers.])
-fi
-
-if test $build_at91rm9200 = yes; then
- build_bitbang=yes
- AC_DEFINE([BUILD_AT91RM9200], [1], [1 if you want at91rm9200.])
-else
- AC_DEFINE([BUILD_AT91RM9200], [0], [0 if you don't want at91rm9200.])
-fi
-
-if test $build_bcm2835gpio = yes; then
- build_bitbang=yes
- AC_DEFINE([BUILD_BCM2835GPIO], [1], [1 if you want bcm2835gpio.])
-else
- AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.])
-fi
-
-if test x$parport_use_ppdev = xyes; then
- AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
-else
- AC_DEFINE([PARPORT_USE_PPDEV], [0], [0 if you don't want parport to use ppdev.])
-fi
-
-if test x$parport_use_giveio = xyes; then
- AC_DEFINE([PARPORT_USE_GIVEIO], [1], [1 if you want parport to use giveio.])
-else
- AC_DEFINE([PARPORT_USE_GIVEIO], [0], [0 if you don't want parport to use giveio.])
-fi
-
-if test $build_bitbang = yes; then
- AC_DEFINE([BUILD_BITBANG], [1], [1 if you want a bitbang interface.])
-else
- AC_DEFINE([BUILD_BITBANG], [0], [0 if you don't want a bitbang interface.])
-fi
-
-if test $build_ft2232_libftdi = yes; then
- AC_DEFINE([BUILD_FT2232_LIBFTDI], [1], [1 if you want libftdi ft2232.])
-else
- AC_DEFINE([BUILD_FT2232_LIBFTDI], [0], [0 if you don't want libftdi ft2232.])
-fi
-
-if test $build_ft2232_ftd2xx = yes; then
- AC_DEFINE([BUILD_FT2232_FTD2XX], [1], [1 if you want ftd2xx ft2232.])
-else
- AC_DEFINE([BUILD_FT2232_FTD2XX], [0], [0 if you don't want ftd2xx ft2232.])
-fi
-
-if test $build_usb_blaster_libftdi = yes; then
- AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [1], [1 if you want libftdi usb_blaster.])
-else
- AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [0], [0 if you don't want libftdi usb_blaster.])
-fi
-
-if test $build_jtag_vpi = yes; then
- AC_DEFINE([BUILD_JTAG_VPI], [1], [1 if you want JTAG VPI.])
-else
- AC_DEFINE([BUILD_JTAG_VPI], [0], [0 if you don't want JTAG VPI.])
-fi
-
-if test $build_usb_blaster_ftd2xx = yes; then
- AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [1], [1 if you want ftd2xx usb_blaster.])
-else
- AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [0], [0 if you don't want ftd2xx usb_blaster.])
-fi
-
-if test $build_amtjtagaccel = yes; then
- AC_DEFINE([BUILD_AMTJTAGACCEL], [1], [1 if you want the Amontec JTAG-Accelerator driver.])
-else
- AC_DEFINE([BUILD_AMTJTAGACCEL], [0], [0 if you don't want the Amontec JTAG-Accelerator driver.])
-fi
-
-if test $build_gw16012 = yes; then
- AC_DEFINE([BUILD_GW16012], [1], [1 if you want the Gateworks GW16012 driver.])
-else
- AC_DEFINE([BUILD_GW16012], [0], [0 if you don't want the Gateworks GW16012 driver.])
-fi
-
-if test $build_presto_libftdi = yes; then
- build_bitq=yes
- AC_DEFINE([BUILD_PRESTO_LIBFTDI], [1], [1 if you want the ASIX PRESTO driver using libftdi.])
-else
- AC_DEFINE([BUILD_PRESTO_LIBFTDI], [0], [0 if you don't want the ASIX PRESTO driver using libftdi.])
-fi
-
-if test $build_presto_ftd2xx = yes; then
- build_bitq=yes
- AC_DEFINE([BUILD_PRESTO_FTD2XX], [1], [1 if you want the ASIX PRESTO driver using FTD2XX.])
-else
- AC_DEFINE([BUILD_PRESTO_FTD2XX], [0], [0 if you don't want the ASIX PRESTO driver using FTD2XX.])
-fi
-
-if test $build_bitq = yes; then
- AC_DEFINE([BUILD_BITQ], [1], [1 if you want a bitq interface.])
-else
- AC_DEFINE([BUILD_BITQ], [0], [0 if you don't want a bitq interface.])
-fi
-
-AC_DEFINE([BUILD_OPENJTAG], [0], [0 if you don't want the OpenJTAG driver.])
-AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [0], [0 if you don't want the OpenJTAG driver with FTD2XX driver.])
-AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [0], [0 if you don't want to build OpenJTAG driver with libftdi.])
-
-if test $build_openjtag_ftd2xx = yes; then
- AC_DEFINE([BUILD_OPENJTAG], [1], [1 if you want the OpenJTAG driver.])
- AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [1], [1 if you want the OpenJTAG driver with FTD2XX driver.])
-fi
-if test $build_openjtag_ftdi = yes; then
- AC_DEFINE([BUILD_OPENJTAG], [1], [1 if you want the OpenJTAG drvier.])
- AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [1], [1 if you want to build OpenJTAG with FTDI driver.])
-fi
-
-if test $build_oocd_trace = yes; then
- AC_DEFINE([BUILD_OOCD_TRACE], [1], [1 if you want the OpenOCD+trace ETM capture driver.])
-else
- AC_DEFINE([BUILD_OOCD_TRACE], [0], [0 if you don't want the OpenOCD+trace ETM capture driver.])
-fi
-
-if test $build_buspirate = yes; then
- AC_DEFINE([BUILD_BUSPIRATE], [1], [1 if you want the Buspirate JTAG driver.])
-else
- AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.])
-fi
-
-if test $use_internal_jimtcl = yes; then
- if test -f "$srcdir/jimtcl/configure.ac"; then
- AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim])
- else
- AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.])
- fi
-fi
-
-if test $use_internal_libjaylink = yes; then
- if test -f "$srcdir/src/jtag/drivers/libjaylink/configure.ac"; then
- ( cd $srcdir/src/jtag/drivers/libjaylink/ && ./autogen.sh )
- AX_CONFIG_SUBDIR_OPTION([src/jtag/drivers/libjaylink],
- [--enable-subproject-build])
- else
- AC_MSG_ERROR([Internal libjaylink not found, run either 'git submodule init' and 'git submodule update' or disable internal libjaylink with --disable-internal-libjaylink.])
- fi
-else
- PKG_CHECK_MODULES([libjaylink], [libjaylink >= 0.1],
- [CFLAGS="$CFLAGS $libjaylink_CFLAGS"; LIBS="$LIBS $libjaylink_LIBS"; HAVE_LIBJAYLINK=yes], [HAVE_LIBJAYLINK=no])
-fi
-
-if test $build_remote_bitbang = yes; then
- build_bitbang=yes
- AC_DEFINE([BUILD_REMOTE_BITBANG], [1], [1 if you want the Remote Bitbang JTAG driver.])
-else
- AC_DEFINE([BUILD_REMOTE_BITBANG], [0], [0 if you don't want the Remote Bitbang JTAG driver.])
-fi
-
-if test $build_sysfsgpio = yes; then
- build_bitbang=yes
- AC_DEFINE([BUILD_SYSFSGPIO], [1], [1 if you want the SysfsGPIO driver.])
-else
- AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
-fi
-#-- Deal with MingW/Cygwin FTD2XX issues
-
-if test $is_win32 = yes; then
-if test "${with_ftd2xx_linux_tardir+set}" = set
-then
- AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
-fi
-
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
- AC_MSG_CHECKING([for ftd2xx.lib exists (win32)])
-
- # if we are given a zipdir...
- if test "${with_ftd2xx_win32_zipdir+set}" = set
- then
- # Set the CFLAGS for "ftd2xx.h"
- f=$with_ftd2xx_win32_zipdir/ftd2xx.h
- if test ! -f $f ; then
- AC_MSG_ERROR([File: $f cannot be found])
- fi
- CFLAGS="$CFLAGS -I$with_ftd2xx_win32_zipdir"
-
- # And calculate the LDFLAGS for the machine
- case "$host_cpu" in
- i?86|x86_32)
- LDFLAGS="$LDFLAGS -L$with_ftd2xx_win32_zipdir/i386"
- LIBS="$LIBS -lftd2xx"
- f=$with_ftd2xx_win32_zipdir/i386/ftd2xx.lib
- ;;
- amd64|x86_64)
- LDFLAGS="$LDFLAGS -L$with_ftd2xx_win32_zipdir/amd64"
- LIBS="$LIBS -lftd2xx"
- f=$with_ftd2xx_win32_zipdir/amd64/ftd2xx.lib
- ;;
- *)
- AC_MSG_ERROR([Unknown Win32 host cpu: $host_cpu])
- ;;
- esac
- if test ! -f $f ; then
- AC_MSG_ERROR([Library: $f not found])
- fi
- else
- LIBS="$LIBS -lftd2xx"
- AC_MSG_WARN([ASSUMPTION: The (win32) FTDICHIP.COM files: ftd2xx.h and ftd2xx.lib are in a proper place])
- fi
-fi
-fi # win32
-
-if test $is_darwin = yes ; then
-if test "${with_ftd2xx_win32_zipdir+set}" = set
-then
- AC_MSG_ERROR([The option: --with-ftd2xx-win32-zipdir is for win32 only])
-fi
-if test "${with_ftd2xx_linux_tardir+set}" = set
-then
- AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
-fi
-
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
- AC_MSG_CHECKING([for libftd2xx.a (darwin)])
-
- if test ! -f /usr/local/include/ftd2xx.h ; then
- AC_MSG_ERROR([ftd2xx library from FTDICHIP.com seems to be missing, cannot find: /usr/local/include/ftd2xx.h])
- fi
-
- CFLAGS="$CFLAGS -I/usr/local/include"
- LDFLAGS="$LDFLAGS -L/usr/local/lib"
- LIBS="$LIBS -lftd2xx"
- AC_MSG_RESULT([-L/usr/local/lib -lftd2xx])
-fi
-fi # darwin
-
-if test $is_win32 = no && test $is_darwin = no ; then
-
-if test "${with_ftd2xx_win32_zipdir+set}" = set
-then
- AC_MSG_ERROR([The option: --with-ftd2xx-win32-zipdir is for win32 only])
-fi
-
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
- # Must be linux
- if test $host_os != linux-gnu && test $host_os != linux ; then
- AC_MSG_ERROR([The (linux) ftd2xx library from FTDICHIP.com is linux only. Try --enable-ft2232-libftdi instead])
- fi
- # Are we given a TAR directory?
- if test "${with_ftd2xx_linux_tardir+set}" = set
- then
- AC_MSG_CHECKING([uninstalled ftd2xx distribution])
- # The .H file is simple..
- FTD2XX_H=$with_ftd2xx_linux_tardir/ftd2xx.h
- if test ! -f "${FTD2XX_H}"; then
- AC_MSG_ERROR([Option: --with-ftd2xx-linux-tardir appears wrong, cannot find: ${FTD2XX_H}])
- fi
- CFLAGS="$CFLAGS -I$with_ftd2xx_linux_tardir"
- if test $with_ftd2xx_lib = shared; then
- FTD2XX_LDFLAGS="-L$with_ftd2xx_linux_tardir"
- FTD2XX_LIB="-lftd2xx"
- else
- # Test #1 - v1.0.x
- case "$host_cpu" in
- i?86|x86_32)
- dir=build/i386;;
- amd64|x86_64)
- dir=build/x86_64;;
- *)
- dir=none;;
- esac
- if test -f "$with_ftd2xx_linux_tardir/$dir/libftd2xx.a"; then
- FTD2XX_LDFLAGS="-L$with_ftd2xx_linux_tardir/$dir"
- # Also needs -lrt
- FTD2XX_LIB="-lftd2xx -lrt"
- else
- # Test Number2.
- # Grr.. perhaps it exists as a version number?
- FTD2XX_LIB="$with_ftd2xx_linux_tardir/static_lib/libftd2xx.a.*.*.*"
- count=`ls ${FTD2XX_LIB} | wc -l`
- if test $count -gt 1 ; then
- AC_MSG_ERROR([Multiple libftd2xx.a files found in: $with_ftd2xx_linux_tardir/static_lib sorry cannot handle this yet])
- fi
- if test $count -ne 1 ; then
- AC_MSG_ERROR([Not found: $f, option: --with-ftd2xx-linux-tardir appears to be wrong])
- fi
- # Because the "-l" rules do not understand version numbers...
- # we will just stuff the absolute path onto the LIBS variable
- FTD2XX_LIB="`ls ${FTD2XX_LIB}` -lpthread"
- FTD2XX_LDFLAGS=""
- fi
- fi
- LDFLAGS="${LDFLAGS} ${FTD2XX_LDFLAGS}"
- LIBS="${FTD2XX_LIB} ${LIBS}"
- AC_MSG_RESULT([${FTD2XX_LDFLAGS} ${FTD2XX_LIB}])
- else
- AC_CHECK_HEADER([ftd2xx.h],[],[
- AC_MSG_ERROR([You seem to be missing the FTD2xx driver header file.])
- ])
- AC_SEARCH_LIBS([FT_GetLibraryVersion],[ftd2xx],,[
- AC_MSG_ERROR([You appear to be missing the FTD2xx driver library.])
- ],[-lrt -lusb-1.0])
- fi
-fi
-fi # linux
-
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
-
-# Before we go any further - make sure we can *BUILD* and *RUN*
-# a simple app with the "ftd2xx.lib" file - in what ever form we where given
-# We should be able to compile, link and run this test program now
-AC_MSG_CHECKING([whether ftd2xx library works])
-
-#
-# Save the LDFLAGS for later..
-LDFLAGS_SAVE=$LDFLAGS
-CFLAGS_SAVE=$CFLAGS
-_LDFLAGS=`eval echo $LDFLAGS`
-_CFLAGS=`eval echo $CFLAGS`
-LDFLAGS=$_LDFLAGS
-CFLAGS=$_CFLAGS
-
-AC_RUN_IFELSE([AC_LANG_PROGRAM([[
-#include "confdefs.h"
-#if IS_WIN32
-#include "windows.h"
-#endif
-#include <stdio.h>
-#include <ftd2xx.h>
- ]], [[
- DWORD x;
- FT_GetLibraryVersion( &x );
- ]])], [
- AC_MSG_RESULT([Success!])
- ], [
- AC_MSG_ERROR([Cannot build & run test program using ftd2xx.lib])
- ], [
- AC_MSG_RESULT([Skipping as we are cross-compiling])
- ])
-
-AC_MSG_CHECKING([for ftd2xx highspeed device support])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include "confdefs.h"
-#if IS_WIN32
-#include "windows.h"
-#endif
-#include <stdio.h>
-#include <ftd2xx.h>
-
-DWORD x = FT_DEVICE_4232H;
- ]], [])], [
- AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1],
- [Support FT2232H/FT4232HS with FTD2XX or libftdi.])
- build_ft2232_highspeed=yes
- ], [
- build_ft2232_highspeed=no
- ])
- AC_MSG_RESULT([$build_ft2232_highspeed])
-
- if test $build_ft2232_highspeed = no; then
- AC_MSG_WARN([You need a newer FTD2XX driver (version 2.04.16 or later).])
- fi
-
-AC_MSG_CHECKING([for ftd2xx FT232H device support])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include "confdefs.h"
-#if IS_WIN32
-#include "windows.h"
-#endif
-#include <stdio.h>
-#include <ftd2xx.h>
-
-DWORD x = FT_DEVICE_232H;
- ]], [])], [
- AC_DEFINE([HAS_ENUM_FT232H], [1],
- [Support FT232H with FTD2XX or libftdi.])
- has_enum_ft232h=yes
- ], [
- has_enum_ft232h=no
- ])
- AC_MSG_RESULT([$has_enum_ft232h])
-
- if test $has_enum_ft232h = no; then
- AC_MSG_WARN([You need a newer FTD2XX driver (version 2.08.12 or later).])
- fi
-
-LDFLAGS=$LDFLAGS_SAVE
-CFLAGS=$CFLAGS_SAVE
-fi
-
-if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes -o \
- $build_openjtag_ftdi = yes -o $build_presto_libftdi = yes; then
-
- # we can have libftdi or libftdi1, so check it and use the latest one
- PKG_CHECK_MODULES([LIBFTDI], [libftdi1], [use_libftdi=yes], [use_libftdi=no])
- if test $use_libftdi = no; then
- PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no])
- fi
- if test $use_libftdi = no; then
- AC_MSG_ERROR([The libftdi driver is not present on your system.])
- fi
-
- #
- # Try to build a small program.
- AC_MSG_CHECKING([Build & Link with libftdi...])
-
- LDFLAGS_SAVE=$LDFLAGS
- CFLAGS_SAVE=$CFLAGS
- LIBS_SAVE=$LIBS
- _LDFLAGS=`eval echo $LDFLAGS`
- _CFLAGS=`eval echo $CFLAGS`
- _LIBS=`eval echo $LIBS`
- LDFLAGS=$_LDFLAGS
- CFLAGS="$_CFLAGS $LIBFTDI_CFLAGS"
- LIBS="$_LIBS $LIBFTDI_LIBS"
-
- AC_RUN_IFELSE([AC_LANG_PROGRAM([[
-#include <stdio.h>
-#include <ftdi.h>
- ]], [[
- struct ftdi_context *p;
- p = ftdi_new();
- if( p != NULL ){
- return 0;
- } else {
- fprintf( stderr, "calling ftdi_new() failed\n");
- return 1;
- }
- ]])], [
- AC_MSG_RESULT([Success])
- ], [
- AC_MSG_ERROR([Cannot build & run test program using libftdi])
- ], [
- AC_MSG_RESULT([Skipping as we are cross-compiling, trying build only])
- AC_SEARCH_LIBS([ftdi_new], [], [], [AC_MSG_ERROR([Cannot link with libftdi])])
- ])
-
-AC_MSG_CHECKING([for libftdi highspeed device support])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include <stdio.h>
-#include <ftdi.h>
- ]], [[
-enum ftdi_chip_type x = TYPE_2232H;
- ]])], [
- AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1],
- [Support FT2232H/FT4232HS with FTD2XX or libftdi.])
- build_ft2232_highspeed=yes
- ], [
- build_ft2232_highspeed=no
- ])
- AC_MSG_RESULT([$build_ft2232_highspeed])
-
- if test $build_ft2232_highspeed = no; then
- AC_MSG_WARN([You need a newer libftdi version (0.16 or later).])
- fi
-
-AC_MSG_CHECKING([for libftdi FT232H device support])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include <stdio.h>
-#include <ftdi.h>
- ]], [[
-enum ftdi_chip_type x = TYPE_232H;
- ]])], [
- AC_DEFINE([HAS_ENUM_FT232H], [1],
- [Support FT232H with FTD2XX or libftdi.])
- has_enum_ft232h=yes
- ], [
- has_enum_ft232h=no
- ])
- AC_MSG_RESULT([$has_enum_ft232h])
-
- if test $has_enum_ft232h = no; then
- AC_MSG_WARN([You need a newer libftdi version (0.20 or later).])
- fi
-
- # Restore the 'unexpanded ldflags'
- LDFLAGS=$LDFLAGS_SAVE
- CFLAGS=$CFLAGS_SAVE
- LIBS=$LIBS_SAVE
-fi
-
-PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
- use_libusb1=yes
- AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
- PKG_CHECK_EXISTS([libusb-1.0 >= 1.0.9],
- [AC_DEFINE([HAVE_LIBUSB_ERROR_NAME], [1], [Define if your libusb has libusb_error_name()])],
- [AC_MSG_WARN([libusb-1.x older than 1.0.9 detected, consider updating])])
- LIBUSB1_CFLAGS=`echo $LIBUSB1_CFLAGS | sed 's/-I/-isystem /'`
- AC_MSG_NOTICE([libusb-1.0 header bug workaround: LIBUSB1_CFLAGS changed to "$LIBUSB1_CFLAGS"])
- PKG_CHECK_EXISTS([libusb-1.0 >= 1.0.16],
- [AC_DEFINE([HAVE_LIBUSB_GET_PORT_NUMBERS], [1], [Define if your libusb has libusb_get_port_numbers()])])
- ], [
- use_libusb1=no
- AC_MSG_WARN([libusb-1.x not found, trying legacy libusb-0.1 as a fallback; consider installing libusb-1.x instead])
-])
-
-PKG_CHECK_MODULES([LIBUSB0], [libusb], [use_libusb0=yes], [use_libusb0=no])
-
-for hidapi_lib in hidapi hidapi-hidraw hidapi-libusb; do
- PKG_CHECK_MODULES([HIDAPI],[$hidapi_lib],[
- use_hidapi=yes
- break
- ],[
- use_hidapi=no
- ])
-done
-
-m4_define([PROCESS_ADAPTERS], [
- m4_foreach([adapter], [$1], [
- if test $2; then
- if test $ADAPTER_VAR([adapter]) != no; then
- AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).)
- else
- AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [0], [0 if you do not want the ]ADAPTER_DESC([adapter]).)
- fi
- else
- if test $ADAPTER_VAR([adapter]) = yes; then
- AC_MSG_ERROR([$3 is required for the ADAPTER_DESC([adapter])])
- fi
- ADAPTER_VAR([adapter])=no
- fi
- AM_CONDITIONAL(ADAPTER_SYM([adapter]), [test $ADAPTER_VAR([adapter]) != no])
- ])
-])
-
-PROCESS_ADAPTERS([USB1_ADAPTERS], [$use_libusb1 = yes], [libusb-1.x])
-PROCESS_ADAPTERS([USB_ADAPTERS], [$use_libusb1 = yes -o $use_libusb0 = yes], [libusb-1.x or libusb-0.1])
-PROCESS_ADAPTERS([USB0_ADAPTERS], [$use_libusb0 = yes], [libusb-0.1])
-PROCESS_ADAPTERS([HIDAPI_ADAPTERS], [$use_hidapi = yes], [hidapi])
-
-if test $enable_stlink != no -o $enable_ti_icdi != no; then
- AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.])
-else
- AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you want the High Level JTAG driver.])
-fi
-AM_CONDITIONAL([HLADAPTER], [test $enable_stlink != no -o $enable_ti_icdi != no])
-
-# Disable J-Link driver if internal libjaylink is disabled and libjaylink was
-# not found by pkg-config.
-if test $enable_jlink != no; then
- if test $use_internal_libjaylink$HAVE_LIBJAYLINK = nono; then
- enable_jlink=no
- fi
-fi
-
-AM_CONDITIONAL([RELEASE], [test $build_release = yes])
-AM_CONDITIONAL([PARPORT], [test $build_parport = yes])
-AM_CONDITIONAL([DUMMY], [test $build_dummy = yes])
-AM_CONDITIONAL([GIVEIO], [test x$parport_use_giveio = xyes])
-AM_CONDITIONAL([EP93XX], [test $build_ep93xx = yes])
-AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes])
-AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
-AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
-AM_CONDITIONAL([AT91RM9200], [test $build_at91rm9200 = yes])
-AM_CONDITIONAL([BCM2835GPIO], [test $build_bcm2835gpio = yes])
-AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes])
-AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes])
-AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes])
-AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
-AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
-AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes])
-AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no])
-AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
-AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
-AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
-AM_CONDITIONAL([PRESTO_DRIVER], [test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes])
-AM_CONDITIONAL([OPENJTAG], [test $build_openjtag_ftd2xx = yes -o $build_openjtag_ftdi = yes])
-AM_CONDITIONAL([OOCD_TRACE], [test $build_oocd_trace = yes])
-AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes])
-AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes])
-AM_CONDITIONAL([SYSFSGPIO], [test $build_sysfsgpio = yes])
-AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes])
-AM_CONDITIONAL([USE_LIBUSB1], [test $use_libusb1 = yes])
-AM_CONDITIONAL([IS_CYGWIN], [test $is_cygwin = yes])
-AM_CONDITIONAL([IS_MINGW], [test $is_mingw = yes])
-AM_CONDITIONAL([IS_WIN32], [test $is_win32 = yes])
-AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = yes])
-AM_CONDITIONAL([BITQ], [test $build_bitq = yes])
-AM_CONDITIONAL([CMSIS_DAP], [test $use_hidapi = yes])
-
-AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = yes])
-AM_CONDITIONAL([MINIDRIVER_DUMMY], [test $build_minidriver_dummy = yes])
-
-AM_CONDITIONAL([INTERNAL_JIMTCL], [test $use_internal_jimtcl = yes])
-AM_CONDITIONAL([INTERNAL_LIBJAYLINK], [test $use_internal_libjaylink = yes])
-
-# Look for environ alternatives. Possibility #1: is environ in unistd.h or stdlib.h?
-AC_MSG_CHECKING([for environ in unistd.h and stdlib.h])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#define _GNU_SOURCE
-#include <unistd.h>
-#include <stdlib.h>
- ]], [[char **ep = environ;]]
- )], [
- AC_MSG_RESULT([yes])
- has_environ=yes
- ], [
- AC_MSG_RESULT([no])
-
- # Possibility #2: can environ be found in an available library?
- AC_MSG_CHECKING([for extern environ])
- AC_LINK_IFELSE([AC_LANG_PROGRAM([[
- extern char **environ;
- ]], [[char **ep = environ;]]
- )], [
- AC_DEFINE(NEED_ENVIRON_EXTERN, [1], [Must declare 'environ' to use it.])
- has_environ=yes
- ], [
- has_environ=no
- ])
- AC_MSG_RESULT([${has_environ}])
- ])
-
-if test "${has_environ}" != "yes" ; then
- AC_MSG_FAILURE([Could not find 'environ' in unistd.h or available libraries.])
-fi
-
-AC_DEFINE([_GNU_SOURCE],[1],[Use GNU C library extensions (e.g. stdndup).])
-
-# set default gcc warnings
-GCC_WARNINGS="-Wall -Wstrict-prototypes -Wformat-security -Wshadow"
-if test "${gcc_wextra}" = yes; then
- GCC_WARNINGS="${GCC_WARNINGS} -Wextra -Wno-unused-parameter"
- GCC_WARNINGS="${GCC_WARNINGS} -Wbad-function-cast"
- GCC_WARNINGS="${GCC_WARNINGS} -Wcast-align"
- GCC_WARNINGS="${GCC_WARNINGS} -Wredundant-decls"
-fi
-if test "${gcc_werror}" = yes; then
- GCC_WARNINGS="${GCC_WARNINGS} -Werror"
-fi
-
-# overide default gcc cflags
-if test $gcc_warnings = yes; then
- CFLAGS="$CFLAGS $GCC_WARNINGS"
-fi
-
-AC_CONFIG_FILES([
- Makefile
- src/Makefile
- src/helper/Makefile
- src/jtag/Makefile
- src/jtag/drivers/Makefile
- src/jtag/drivers/usb_blaster/Makefile
- src/jtag/hla/Makefile
- src/jtag/aice/Makefile
- src/transport/Makefile
- src/target/openrisc/Makefile
- src/xsvf/Makefile
- src/svf/Makefile
- src/target/Makefile
- src/rtos/Makefile
- src/server/Makefile
- src/flash/Makefile
- src/flash/nor/Makefile
- src/flash/nand/Makefile
- src/pld/Makefile
- doc/Makefile
-])
-AC_OUTPUT
-
-echo
-echo
-echo OpenOCD configuration summary
-echo --------------------------------------------------
-m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS, HIDAPI_ADAPTERS],
- [s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))
- case $ADAPTER_VAR([adapter]) in
- auto)
- echo "$s"yes '(auto)'
- ;;
- yes)
- echo "$s"yes
- ;;
- no)
- echo "$s"no
- ;;
- esac
-])
-echo
-
-if test $build_ft2232_libftdi = yes -o $build_ft2232_ftd2xx = yes; then
- if test $enable_ftdi = no; then
- AC_MSG_WARN([Building the deprecated 'ft2232' adapter driver but not its replacement!])
- AC_MSG_WARN([Please consider using --enable-ftdi instead.])
- else
- AC_MSG_WARN([Building the deprecated 'ft2232' adapter driver.])
- fi
-fi
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/99-openocd.rules
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/99-openocd.rules b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/99-openocd.rules
deleted file mode 100755
index 057c4b7..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/99-openocd.rules
+++ /dev/null
@@ -1,134 +0,0 @@
-# Copy this file to /etc/udev/rules.d/
-
-ACTION!="add|change", GOTO="openocd_rules_end"
-SUBSYSTEM!="usb|tty|hidraw", GOTO="openocd_rules_end"
-
-# Please keep this list sorted by VID:PID
-
-# opendous and estick
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="664", GROUP="plugdev"
-
-# Original FT232/FT245 VID:PID
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="664", GROUP="plugdev"
-
-# Original FT2232 VID:PID
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", MODE="664", GROUP="plugdev"
-
-# Original FT4232 VID:PID
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", MODE="664", GROUP="plugdev"
-
-# Original FT232H VID:PID
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6014", MODE="664", GROUP="plugdev"
-
-# DISTORTEC JTAG-lock-pick Tiny 2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="664", GROUP="plugdev"
-
-# TUMPA, TUMPA Lite
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a98", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a99", MODE="664", GROUP="plugdev"
-
-# XDS100v2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="664", GROUP="plugdev"
-
-# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE)
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca0", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca1", MODE="664", GROUP="plugdev"
-
-# TI/Luminary Stellaris Evaluation Board FTDI (several)
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd9", MODE="664", GROUP="plugdev"
-
-# TI/Luminary Stellaris In-Circuit Debug Interface FTDI (ICDI) Board
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcda", MODE="664", GROUP="plugdev"
-
-# egnite Turtelizer 2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="664", GROUP="plugdev"
-
-# Section5 ICEbear
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c140", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c141", MODE="664", GROUP="plugdev"
-
-# Amontec JTAGkey and JTAGkey-tiny
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="664", GROUP="plugdev"
-
-# TI ICDI
-ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="664", GROUP="plugdev"
-
-# STLink v1
-ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3744", MODE="664", GROUP="plugdev"
-
-# STLink v2
-ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3748", MODE="664", GROUP="plugdev"
-
-# STLink v2-1
-ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374b", MODE="664", GROUP="plugdev"
-
-# Hilscher NXHX Boards
-ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="664", GROUP="plugdev"
-
-# Hitex STR9-comStick
-ATTRS{idVendor}=="0640", ATTRS{idProduct}=="002c", MODE="664", GROUP="plugdev"
-
-# Hitex STM32-PerformanceStick
-ATTRS{idVendor}=="0640", ATTRS{idProduct}=="002d", MODE="664", GROUP="plugdev"
-
-# Altera USB Blaster
-ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="664", GROUP="plugdev"
-
-# Amontec JTAGkey-HiSpeed
-ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="664", GROUP="plugdev"
-
-# SEGGER J-Link
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0101", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0102", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0103", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0104", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0105", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0107", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0108", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1010", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1011", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1012", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1013", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1014", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1015", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1016", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1017", MODE="664", GROUP="plugdev"
-ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1018", MODE="664", GROUP="plugdev"
-
-# Raisonance RLink
-ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="664", GROUP="plugdev"
-
-# Debug Board for Neo1973
-ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="664", GROUP="plugdev"
-
-# Olimex ARM-USB-OCD
-ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0003", MODE="664", GROUP="plugdev"
-
-# Olimex ARM-USB-OCD-TINY
-ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0004", MODE="664", GROUP="plugdev"
-
-# Olimex ARM-JTAG-EW
-ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="001e", MODE="664", GROUP="plugdev"
-
-# Olimex ARM-USB-OCD-TINY-H
-ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002a", MODE="664", GROUP="plugdev"
-
-# Olimex ARM-USB-OCD-H
-ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002b", MODE="664", GROUP="plugdev"
-
-# USBprog with OpenOCD firmware
-ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="664", GROUP="plugdev"
-
-# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
-ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="664", GROUP="plugdev"
-
-# Marvell Sheevaplug
-ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="664", GROUP="plugdev"
-
-# Keil Software, Inc. ULink
-ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="664", GROUP="plugdev"
-
-# CMSIS-DAP compatible adapters
-ATTRS{product}=="*CMSIS-DAP*", MODE="664", GROUP="plugdev"
-
-LABEL="openocd_rules_end"
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/coresight-trace.txt
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/coresight-trace.txt b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/coresight-trace.txt
deleted file mode 100755
index c093c20..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/coresight-trace.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-+OpenOCD and CoreSight Tracing
-+
-Many recent ARM chips (Using e..g. Cortex-M3 and
-Cortex-M4 cores) support CoreSight debug/trace.
-This note sketches an approach currently planned for those cores
-with OpenOCD.
-
- This tracing data can help debug and tune ARM software, but not
-all cores support tracing. Some support more extensive tracing
-other cores with trace support +should be able to use the same
-approach and maybe some of the same analysis code.
-
-+the Cortex-M3 is assumed here to be the
-+core in use, for simplicity and to reflect current OpenOCD users.
-
-
-This note summarizes a software model to generate, collect, and
-analyze such trace data . That is not fully implemented as of early
-January 2011, +and thus is not *yet* usable.
-+
-+
-+Some microcontroller cores support a low pin-count Single-wire trace,
-with a mode where +trace data is emitted (usually to a UART. To use
-this mode, +SWD must be in use.
-+At this writing, OpenOCD SWD support is not yet complete either.
-
-(There are also multi-wire trace ports requiring more complex debug
-adapters than OpenOCD currently supports, and offering richer data.
-+
-+
-+* ENABLING involves activating SWD and (single wire) trace.
-+
-+current expectations are that OpenOCD itself will handle enabling;
-activating single wire trace involves a debug adapter interaction, and
-collecting that trace data requires particular (re)wiring.
-+
-+* CONFIGURATION involves setting up ITM and/or ETM modules to emit the
-+desired data from the Cortex core. (This might include dumping
-+event counters printf-style messages; code profiling; and more. Not all
-+cores offer the same trace capabilities.
-+
-+current expectations are that Tcl scripts will be used to configure these
-+modules for the desired tracing, by direct writes to registers. In some
-+cases (as with RTOS event tracking and similar messaging, this might
-+be augmented or replaced by user code running on the ARM core.
-+
-+COLLECTION involves reading that trace data, probably through UART, and
-+saving it in a useful format to analyse For now, deferred analysis modes
-are assumed, not than real-time or interactive ones.
-+
-+
-+current expectations are to to dump data in text using contrib/itmdump.c
-+or derived tools, and to post-process it into reports. Such reports might
-+include program messaging (such as application data streams via ITM, maybe
-+using printf type messaging; code coverage analysis or so forth. Recent
-+versions of CMSIS software reserve some ITM codespace for RTOS event
-tracing and include ITM messaging support.
-Clearly some of that data would be valuable for interactive debugging.
-+
-+Should someone get ambitious, GUI reports should be possible. GNU tools
-+for simpler reports like gprof may be simpler to support at first.
-+In any case, OpenOCD is not currently GUI-oriented. Accordingly, we now
-+expect any such graphics to come from postprocessing.
-
- measurments for RTOS event timings should also be easy to collect.
-+Examples include context and message switch times, as well as times
-for application interactions.
-+
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/cross-build.sh
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/cross-build.sh b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/cross-build.sh
deleted file mode 100755
index 74ab0f4..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/cross-build.sh
+++ /dev/null
@@ -1,119 +0,0 @@
-#!/bin/sh
-
-# This is an example of how to do a cross-build of OpenOCD using pkg-config.
-# Cross-building with pkg-config is deceptively hard and most guides and
-# tutorials are incomplete or give bad advice. Some of the traps that are easy
-# to fall in but handled by this script are:
-#
-# * Polluting search paths and flags with values from the build system.
-# * Faulty pkg-config wrappers shipped with distribution packaged cross-
-# toolchains.
-# * Build failing because pkg-config discards some paths even though they are
-# correctly listed in the .pc file.
-# * Getting successfully built binaries that cannot find runtime data because
-# paths refer to the build file system.
-#
-# This script is probably more useful as a reference than as a complete build
-# tool but for some configurations it may be usable as-is. It only cross-
-# builds libusb-1.0 from source, but the script can be extended to build other
-# prerequisities in a similar manner.
-#
-# Usage:
-# export LIBUSB1_SRC=/path/to/libusb-1.0
-# export HIDAPI_SRC=/path/to/hidapi
-# export OPENOCD_CONFIG="--enable-..."
-# cd /work/dir
-# /path/to/openocd/contrib/cross-build.sh <host-triplet>
-#
-# For static linking, a workaround is to
-# export LIBUSB1_CONFIG="--enable-static --disable-shared"
-#
-# All the paths must not contain any spaces.
-
-set -e -x
-
-WORK_DIR=$PWD
-
-## Source code paths, customize as necessary
-: ${OPENOCD_SRC:="`dirname "$0"`/.."}
-: ${LIBUSB1_SRC:=/path/to/libusb}
-: ${HIDAPI_SRC:=/path/to/hidapi}
-
-OPENOCD_SRC=`readlink -m $OPENOCD_SRC`
-LIBUSB1_SRC=`readlink -m $LIBUSB1_SRC`
-HIDAPI_SRC=`readlink -m $HIDAPI_SRC`
-
-HOST_TRIPLET=$1
-BUILD_DIR=$WORK_DIR/$HOST_TRIPLET-build
-LIBUSB1_BUILD_DIR=$BUILD_DIR/libusb1
-HIDAPI_BUILD_DIR=$BUILD_DIR/hidapi
-OPENOCD_BUILD_DIR=$BUILD_DIR/openocd
-
-## Root of host file tree
-SYSROOT=$WORK_DIR/$HOST_TRIPLET-root
-
-## Install location within host file tree
-: ${PREFIX=/usr}
-
-## OpenOCD-only install dir for packaging
-PACKAGE_DIR=$WORK_DIR/openocd_`git --git-dir=$OPENOCD_SRC/.git describe`_$HOST_TRIPLET
-
-#######
-
-# Create pkg-config wrapper and make sure it's used
-export PKG_CONFIG=$WORK_DIR/$HOST_TRIPLET-pkg-config
-
-cat > $PKG_CONFIG <<EOF
-#!/bin/sh
-
-SYSROOT=$SYSROOT
-
-export PKG_CONFIG_DIR=
-export PKG_CONFIG_LIBDIR=\${SYSROOT}$PREFIX/lib/pkgconfig:\${SYSROOT}$PREFIX/share/pkgconfig
-export PKG_CONFIG_SYSROOT_DIR=\${SYSROOT}
-
-# The following have to be set to avoid pkg-config to strip /usr/include and /usr/lib from paths
-# before they are prepended with the sysroot path. Feels like a pkg-config bug.
-export PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=
-export PKG_CONFIG_ALLOW_SYSTEM_LIBS=
-
-exec pkg-config "\$@"
-EOF
-chmod +x $PKG_CONFIG
-
-# Clear out work dir
-rm -rf $SYSROOT $BUILD_DIR
-mkdir -p $SYSROOT
-
-# libusb-1.0 build & install into sysroot
-mkdir -p $LIBUSB1_BUILD_DIR
-cd $LIBUSB1_BUILD_DIR
-$LIBUSB1_SRC/configure --build=`$LIBUSB1_SRC/config.guess` --host=$HOST_TRIPLET \
---with-sysroot=$SYSROOT --prefix=$PREFIX \
-$LIBUSB1_CONFIG
-make
-make install DESTDIR=$SYSROOT
-
-# hidapi build & install into sysroot
-if [ -d $HIDAPI_SRC ] ; then
- mkdir -p $HIDAPI_BUILD_DIR
- cd $HIDAPI_BUILD_DIR
- $HIDAPI_SRC/configure --build=`$HIDAPI_SRC/config.guess` --host=$HOST_TRIPLET \
- --with-sysroot=$SYSROOT --prefix=$PREFIX \
- $HIDAPI_CONFIG
- make
- make install DESTDIR=$SYSROOT
-fi
-
-# OpenOCD build & install into sysroot
-mkdir -p $OPENOCD_BUILD_DIR
-cd $OPENOCD_BUILD_DIR
-$OPENOCD_SRC/configure --build=`$OPENOCD_SRC/config.guess` --host=$HOST_TRIPLET \
---with-sysroot=$SYSROOT --prefix=$PREFIX \
-$OPENOCD_CONFIG
-make
-make install DESTDIR=$SYSROOT
-
-# Separate OpenOCD install w/o dependencies. OpenOCD will have to be linked
-# statically or have dependencies packaged/installed separately.
-make install DESTDIR=$PACKAGE_DIR
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/gen-stellaris-part-header.pl
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/gen-stellaris-part-header.pl b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/gen-stellaris-part-header.pl
deleted file mode 100755
index 68f2889..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/contrib/gen-stellaris-part-header.pl
+++ /dev/null
@@ -1,124 +0,0 @@
-#!/usr/bin/perl
-# Automatically generates the StellarisParts struct in src/flash/nor/stellaris.c
-# Uses the header files from TI/Luminary's StellarisWare complete Firmware Development Package
-# available from: http://www.luminarymicro.com/products/software_updates.html
-
-$comment = "// Autogenerated by contrib/gen-stellaris-part-header.pl
-// From Stellaris Firmware Development Package revision";
-
-$struct_header = "static const struct {
- uint8_t class;
- uint8_t partno;
- const char *partname;
-} StellarisParts[] = {
-";
-
-$struct_footer = "\t{0xFF, 0x00, \"Unknown Part\"}\n};\n";
-
-$#ARGV == 1 || die "Usage: $0 <inc directory> <output file>\n";
--d $ARGV[0] || die $ARGV[0]." is not a directory\n";
-$dir = $ARGV[0];
--f $ARGV[1] || die $ARGV[1]." is not a file\n";
-$file = $ARGV[1];
-print STDERR "Scanning $dir, Updating $file\n";
-
-opendir(DIR, $dir) || die "can't open $dir: $!";
-@files = readdir(DIR);
-closedir(DIR);
-
-@header_files = sort(grep(/lm.+\.h/, @files));
-
-$ver = 0;
-$new_struct = $struct_header;
-process_file(@header_files);
-$new_struct .= $struct_footer;
-
-$dump = "$comment $ver\n$new_struct";
-{
- local($/, *INPUT);
- open(INPUT, $file) || die "can't open $file: $!";
- $contents = <INPUT>;
- close(INPUT);
-}
-
-$old_struct = qr/((^\/\/.*?\n)*)\Q$struct_header\E.*?$struct_footer/sm;
-$contents =~ s/$old_struct/$dump/;
-open(OUTPUT, ">$file") || die "can't open file $file for writing: $!";
-print OUTPUT $contents;
-close(OUTPUT);
-
-sub process_file {
- foreach $h_file (@_) {
- ($base) = ($h_file =~ m/lm..(.{3,7})\.h/ig);
- $base = uc($base);
- local($/, *FILE);
- open(FILE, "$dir/$h_file");
- $content = <FILE>;
- close(FILE);
- $invalid = 0;
- if ($content =~ /This is part of revision (\d+) of/) {
- if ($ver != 0 and $ver != $1) {
- print STDERR "File version mismatch: $ver != $1\n";
- $ver = max($ver, $1);
- } else {
- $ver = $1;
- }
- }
-
- if ($content =~ /SYSCTL_DID0_CLASS_[^M].+?0x(\S+)/s) {
- $class = hex($1) >> 16;
- } else {
- # attempt another way to get class
- if ($content =~ /\s(\S+)-class/) {
- $class = getclass($1);
- if ($class eq 0xFF) {
- print STDERR "$h_file unknown class\n";
- $invalid = 1;
- }
- } else {
- print STDERR "$h_file is missing SYSCTL_DID0_CLASS_\n";
- $class = 0;
- $invalid = 1;
- }
- }
-
- if ($content =~ /SYSCTL_DID1_PRTNO_$base.+0x(\S+)/) {
- $prtno = hex($1);
- $base = "LM3S" . $base;
- } else {
- # LM4F have a changed header
- if ($content =~ /SYSCTL_DID1_PRTNO_LM4F$base.+?0x(\S+)/s) {
- $prtno = hex($1);
- $base = "LM4F" . $base;
- } else {
- print STDERR "$h_file is missing SYSCTL_DID1_PRTNO\n";
- $prtno = 0;
- $invalid = 1;
- }
- }
- $new_member = sprintf "{0x%02X, 0x%02X, \"%s\"},", $class, $prtno >> 16, $base;
- if ($invalid == 1) {
- #$new_struct .= "\t//$new_member\t// Invalid\n";
- } else {
- $new_struct .= "\t$new_member\n";
- }
- }
-}
-
-sub getclass {
- $class = $_[0];
- if ($class =~ /Sandstorm/i) {
- return 0;
- } elsif ($class =~ /Fury/i) {
- return 1;
- } elsif ($class =~ /DustDevil/i) {
- return 3;
- } elsif ($class =~ /Tempest/i) {
- return 4;
- } elsif ($class =~ /Blizzard/i) {
- return 5;
- } elsif ($class =~ /Firestorm/i) {
- return 6;
- }
- return 0xFF;
-}