You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@geode.apache.org by Mario Ivanac <ma...@est.tech> on 2019/08/08 11:27:59 UTC
geode-native ipv6
Hi,
can you tell me does geode-native client support ipv6?
BR,
Mario
Re: geode-native ipv6
Posted by Mark Hanson <mh...@pivotal.io>.
I just tried to connect to Geode with the native client and it did not go well. It exceptioned with an illegal argument error.
That said, it “seems" like it might not be complicated to make it IPv6 compliant.
Thanks,
Mark
> On Aug 8, 2019, at 9:56 AM, Mark Hanson <mh...@pivotal.io> wrote:
>
> The latest ACE framework seems to have support, but I don’t know how far off latest we are. I don’t think we test anything in an IPv6 context, so I would say no that we don’t officially support it in the client. Given some time, I could do some testing..
>
> Thanks,
> Mark
>
>> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
>>
>> I'm sure someone will chime in with a more definitive answer, but I'm
>> pretty certain the answer is no, sorry.
>>
>> Thanks,
>>
>> Blake
>>
>>
>> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech> wrote:
>>
>>> Hi,
>>>
>>>
>>> can you tell me does geode-native client support ipv6?
>>>
>>>
>>> BR,
>>>
>>> Mario
>>>
>
Odg: geode-native ipv6
Posted by Mario Ivanac <ma...@est.tech>.
Thanks for detailed answer.
________________________________
Šalje: Jacob Barrett <jb...@pivotal.io>
Poslano: 22. kolovoza 2019. 6:56
Prima: dev@geode.apache.org <de...@geode.apache.org>
Predmet: Re: geode-native ipv6
You might start by updating the framework’s Cluster class accept a hostname that would be used for both Locator and Server classes. Then in an IPv6 tests you could set the hostname to '0:0:0:0:0:0:0:1’, which is the loopback address. In theory this should work.
In Cluster.hpp:
Look for all the NamedType definitions and add.
using BindAddress = NamedType<std::string, struct BindAddressParameter>;
Plumb it though to Locator and Server.
In your test:
Cluster cluster(…, BindAddress(“0:0:0:0:0:0:0:1"));
Even more simple may be to not allow the hostname but just a flag for IPv4 or IPv6 and internally set the hostname to the IPv6 or IPv6 localhost address.
In Cluster.hpp:
using UseIpv6 = NamedType<std::bool, struct UseIpv6Parameter>;
Then plumb that through to Locator and Server and select the appropriate loopback address.
In your test:
Cluster cluster(…, UseIpv6(true));
I can help you in more detail if you want.
-Jake
> On Aug 21, 2019, at 12:34 AM, Mario Ivanac <ma...@est.tech> wrote:
>
> Hi,
>
>
> Can you help me, how to simulate ipv6 in new integration test framework?
>
>
> BR,
>
> Mario
>
> ________________________________
> Šalje: Jacob Barrett <jb...@pivotal.io>
> Poslano: 14. kolovoza 2019. 21:00:35
> Prima: dev@geode.apache.org <de...@geode.apache.org>
> Predmet: Re: geode-native ipv6
>
> Can you build an integration test in the new framework?
>
>> On Aug 14, 2019, at 11:25 AM, Mario Ivanac <ma...@est.tech> wrote:
>>
>> Hi,
>>
>>
>> created https://issues.apache.org/jira/browse/GEODE-7086, and PR with code impacts.
>>
>> Proposed solution was tried on IPv6 environment, and basic operations (PUT/GET) were successful.
>>
>> Additional test needed.
>>
>>
>> BR,
>>
>> Mario
>>
>> ________________________________
>> Šalje: Blake Bender <bb...@pivotal.io>
>> Poslano: 9. kolovoza 2019. 0:03:32
>> Prima: dev@geode.apache.org <de...@geode.apache.org>
>> Predmet: Re: geode-native ipv6
>>
>> This chunk of code in the client handshake code leads me to believe it is
>> still IPv4 only. Won't say it's definitive, cause I'm not 100% certain
>> hostaddr is used on the server side, but still...
>>
>> // writing first 4 bytes of the address. This will be same until
>> // IPV6 support is added in the client
>> uint32_t temp;
>> memcpy(&temp, hostAddr, 4);
>> m_memID.writeInt(static_cast<int32_t>(temp));
>>
>>
>>> On Thu, Aug 8, 2019 at 1:18 PM Jacob Barrett <jb...@pivotal.io> wrote:
>>>
>>> We are on the latest ACE.
>>>
>>>> On Aug 8, 2019, at 9:56 AM, Mark Hanson <mh...@pivotal.io> wrote:
>>>>
>>>> The latest ACE framework seems to have support, but I don’t know how far
>>> off latest we are. I don’t think we test anything in an IPv6 context, so I
>>> would say no that we don’t officially support it in the client. Given some
>>> time, I could do some testing..
>>>>
>>>> Thanks,
>>>> Mark
>>>>
>>>>> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
>>>>>
>>>>> I'm sure someone will chime in with a more definitive answer, but I'm
>>>>> pretty certain the answer is no, sorry.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Blake
>>>>>
>>>>>
>>>>>> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech>
>>> wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>>
>>>>>> can you tell me does geode-native client support ipv6?
>>>>>>
>>>>>>
>>>>>> BR,
>>>>>>
>>>>>> Mario
>>>>>>
>>>>
>>>
Re: geode-native ipv6
Posted by Jacob Barrett <jb...@pivotal.io>.
You might start by updating the framework’s Cluster class accept a hostname that would be used for both Locator and Server classes. Then in an IPv6 tests you could set the hostname to '0:0:0:0:0:0:0:1’, which is the loopback address. In theory this should work.
In Cluster.hpp:
Look for all the NamedType definitions and add.
using BindAddress = NamedType<std::string, struct BindAddressParameter>;
Plumb it though to Locator and Server.
In your test:
Cluster cluster(…, BindAddress(“0:0:0:0:0:0:0:1"));
Even more simple may be to not allow the hostname but just a flag for IPv4 or IPv6 and internally set the hostname to the IPv6 or IPv6 localhost address.
In Cluster.hpp:
using UseIpv6 = NamedType<std::bool, struct UseIpv6Parameter>;
Then plumb that through to Locator and Server and select the appropriate loopback address.
In your test:
Cluster cluster(…, UseIpv6(true));
I can help you in more detail if you want.
-Jake
> On Aug 21, 2019, at 12:34 AM, Mario Ivanac <ma...@est.tech> wrote:
>
> Hi,
>
>
> Can you help me, how to simulate ipv6 in new integration test framework?
>
>
> BR,
>
> Mario
>
> ________________________________
> Šalje: Jacob Barrett <jb...@pivotal.io>
> Poslano: 14. kolovoza 2019. 21:00:35
> Prima: dev@geode.apache.org <de...@geode.apache.org>
> Predmet: Re: geode-native ipv6
>
> Can you build an integration test in the new framework?
>
>> On Aug 14, 2019, at 11:25 AM, Mario Ivanac <ma...@est.tech> wrote:
>>
>> Hi,
>>
>>
>> created https://issues.apache.org/jira/browse/GEODE-7086, and PR with code impacts.
>>
>> Proposed solution was tried on IPv6 environment, and basic operations (PUT/GET) were successful.
>>
>> Additional test needed.
>>
>>
>> BR,
>>
>> Mario
>>
>> ________________________________
>> Šalje: Blake Bender <bb...@pivotal.io>
>> Poslano: 9. kolovoza 2019. 0:03:32
>> Prima: dev@geode.apache.org <de...@geode.apache.org>
>> Predmet: Re: geode-native ipv6
>>
>> This chunk of code in the client handshake code leads me to believe it is
>> still IPv4 only. Won't say it's definitive, cause I'm not 100% certain
>> hostaddr is used on the server side, but still...
>>
>> // writing first 4 bytes of the address. This will be same until
>> // IPV6 support is added in the client
>> uint32_t temp;
>> memcpy(&temp, hostAddr, 4);
>> m_memID.writeInt(static_cast<int32_t>(temp));
>>
>>
>>> On Thu, Aug 8, 2019 at 1:18 PM Jacob Barrett <jb...@pivotal.io> wrote:
>>>
>>> We are on the latest ACE.
>>>
>>>> On Aug 8, 2019, at 9:56 AM, Mark Hanson <mh...@pivotal.io> wrote:
>>>>
>>>> The latest ACE framework seems to have support, but I don’t know how far
>>> off latest we are. I don’t think we test anything in an IPv6 context, so I
>>> would say no that we don’t officially support it in the client. Given some
>>> time, I could do some testing..
>>>>
>>>> Thanks,
>>>> Mark
>>>>
>>>>> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
>>>>>
>>>>> I'm sure someone will chime in with a more definitive answer, but I'm
>>>>> pretty certain the answer is no, sorry.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Blake
>>>>>
>>>>>
>>>>>> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech>
>>> wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>>
>>>>>> can you tell me does geode-native client support ipv6?
>>>>>>
>>>>>>
>>>>>> BR,
>>>>>>
>>>>>> Mario
>>>>>>
>>>>
>>>
Re: geode-native ipv6
Posted by Mario Ivanac <ma...@est.tech>.
Hi,
Can you help me, how to simulate ipv6 in new integration test framework?
BR,
Mario
________________________________
Šalje: Jacob Barrett <jb...@pivotal.io>
Poslano: 14. kolovoza 2019. 21:00:35
Prima: dev@geode.apache.org <de...@geode.apache.org>
Predmet: Re: geode-native ipv6
Can you build an integration test in the new framework?
> On Aug 14, 2019, at 11:25 AM, Mario Ivanac <ma...@est.tech> wrote:
>
> Hi,
>
>
> created https://issues.apache.org/jira/browse/GEODE-7086, and PR with code impacts.
>
> Proposed solution was tried on IPv6 environment, and basic operations (PUT/GET) were successful.
>
> Additional test needed.
>
>
> BR,
>
> Mario
>
> ________________________________
> Šalje: Blake Bender <bb...@pivotal.io>
> Poslano: 9. kolovoza 2019. 0:03:32
> Prima: dev@geode.apache.org <de...@geode.apache.org>
> Predmet: Re: geode-native ipv6
>
> This chunk of code in the client handshake code leads me to believe it is
> still IPv4 only. Won't say it's definitive, cause I'm not 100% certain
> hostaddr is used on the server side, but still...
>
> // writing first 4 bytes of the address. This will be same until
> // IPV6 support is added in the client
> uint32_t temp;
> memcpy(&temp, hostAddr, 4);
> m_memID.writeInt(static_cast<int32_t>(temp));
>
>
>> On Thu, Aug 8, 2019 at 1:18 PM Jacob Barrett <jb...@pivotal.io> wrote:
>>
>> We are on the latest ACE.
>>
>>> On Aug 8, 2019, at 9:56 AM, Mark Hanson <mh...@pivotal.io> wrote:
>>>
>>> The latest ACE framework seems to have support, but I don’t know how far
>> off latest we are. I don’t think we test anything in an IPv6 context, so I
>> would say no that we don’t officially support it in the client. Given some
>> time, I could do some testing..
>>>
>>> Thanks,
>>> Mark
>>>
>>>> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
>>>>
>>>> I'm sure someone will chime in with a more definitive answer, but I'm
>>>> pretty certain the answer is no, sorry.
>>>>
>>>> Thanks,
>>>>
>>>> Blake
>>>>
>>>>
>>>>> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech>
>> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>>
>>>>> can you tell me does geode-native client support ipv6?
>>>>>
>>>>>
>>>>> BR,
>>>>>
>>>>> Mario
>>>>>
>>>
>>
Re: geode-native ipv6
Posted by Jacob Barrett <jb...@pivotal.io>.
Can you build an integration test in the new framework?
> On Aug 14, 2019, at 11:25 AM, Mario Ivanac <ma...@est.tech> wrote:
>
> Hi,
>
>
> created https://issues.apache.org/jira/browse/GEODE-7086, and PR with code impacts.
>
> Proposed solution was tried on IPv6 environment, and basic operations (PUT/GET) were successful.
>
> Additional test needed.
>
>
> BR,
>
> Mario
>
> ________________________________
> Šalje: Blake Bender <bb...@pivotal.io>
> Poslano: 9. kolovoza 2019. 0:03:32
> Prima: dev@geode.apache.org <de...@geode.apache.org>
> Predmet: Re: geode-native ipv6
>
> This chunk of code in the client handshake code leads me to believe it is
> still IPv4 only. Won't say it's definitive, cause I'm not 100% certain
> hostaddr is used on the server side, but still...
>
> // writing first 4 bytes of the address. This will be same until
> // IPV6 support is added in the client
> uint32_t temp;
> memcpy(&temp, hostAddr, 4);
> m_memID.writeInt(static_cast<int32_t>(temp));
>
>
>> On Thu, Aug 8, 2019 at 1:18 PM Jacob Barrett <jb...@pivotal.io> wrote:
>>
>> We are on the latest ACE.
>>
>>> On Aug 8, 2019, at 9:56 AM, Mark Hanson <mh...@pivotal.io> wrote:
>>>
>>> The latest ACE framework seems to have support, but I don’t know how far
>> off latest we are. I don’t think we test anything in an IPv6 context, so I
>> would say no that we don’t officially support it in the client. Given some
>> time, I could do some testing..
>>>
>>> Thanks,
>>> Mark
>>>
>>>> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
>>>>
>>>> I'm sure someone will chime in with a more definitive answer, but I'm
>>>> pretty certain the answer is no, sorry.
>>>>
>>>> Thanks,
>>>>
>>>> Blake
>>>>
>>>>
>>>>> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech>
>> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>>
>>>>> can you tell me does geode-native client support ipv6?
>>>>>
>>>>>
>>>>> BR,
>>>>>
>>>>> Mario
>>>>>
>>>
>>
Re: geode-native ipv6
Posted by Mario Ivanac <ma...@est.tech>.
Hi,
created https://issues.apache.org/jira/browse/GEODE-7086, and PR with code impacts.
Proposed solution was tried on IPv6 environment, and basic operations (PUT/GET) were successful.
Additional test needed.
BR,
Mario
________________________________
Šalje: Blake Bender <bb...@pivotal.io>
Poslano: 9. kolovoza 2019. 0:03:32
Prima: dev@geode.apache.org <de...@geode.apache.org>
Predmet: Re: geode-native ipv6
This chunk of code in the client handshake code leads me to believe it is
still IPv4 only. Won't say it's definitive, cause I'm not 100% certain
hostaddr is used on the server side, but still...
// writing first 4 bytes of the address. This will be same until
// IPV6 support is added in the client
uint32_t temp;
memcpy(&temp, hostAddr, 4);
m_memID.writeInt(static_cast<int32_t>(temp));
On Thu, Aug 8, 2019 at 1:18 PM Jacob Barrett <jb...@pivotal.io> wrote:
> We are on the latest ACE.
>
> > On Aug 8, 2019, at 9:56 AM, Mark Hanson <mh...@pivotal.io> wrote:
> >
> > The latest ACE framework seems to have support, but I don’t know how far
> off latest we are. I don’t think we test anything in an IPv6 context, so I
> would say no that we don’t officially support it in the client. Given some
> time, I could do some testing..
> >
> > Thanks,
> > Mark
> >
> >> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
> >>
> >> I'm sure someone will chime in with a more definitive answer, but I'm
> >> pretty certain the answer is no, sorry.
> >>
> >> Thanks,
> >>
> >> Blake
> >>
> >>
> >>> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech>
> wrote:
> >>>
> >>> Hi,
> >>>
> >>>
> >>> can you tell me does geode-native client support ipv6?
> >>>
> >>>
> >>> BR,
> >>>
> >>> Mario
> >>>
> >
>
Re: geode-native ipv6
Posted by Blake Bender <bb...@pivotal.io>.
This chunk of code in the client handshake code leads me to believe it is
still IPv4 only. Won't say it's definitive, cause I'm not 100% certain
hostaddr is used on the server side, but still...
// writing first 4 bytes of the address. This will be same until
// IPV6 support is added in the client
uint32_t temp;
memcpy(&temp, hostAddr, 4);
m_memID.writeInt(static_cast<int32_t>(temp));
On Thu, Aug 8, 2019 at 1:18 PM Jacob Barrett <jb...@pivotal.io> wrote:
> We are on the latest ACE.
>
> > On Aug 8, 2019, at 9:56 AM, Mark Hanson <mh...@pivotal.io> wrote:
> >
> > The latest ACE framework seems to have support, but I don’t know how far
> off latest we are. I don’t think we test anything in an IPv6 context, so I
> would say no that we don’t officially support it in the client. Given some
> time, I could do some testing..
> >
> > Thanks,
> > Mark
> >
> >> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
> >>
> >> I'm sure someone will chime in with a more definitive answer, but I'm
> >> pretty certain the answer is no, sorry.
> >>
> >> Thanks,
> >>
> >> Blake
> >>
> >>
> >>> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech>
> wrote:
> >>>
> >>> Hi,
> >>>
> >>>
> >>> can you tell me does geode-native client support ipv6?
> >>>
> >>>
> >>> BR,
> >>>
> >>> Mario
> >>>
> >
>
Re: geode-native ipv6
Posted by Jacob Barrett <jb...@pivotal.io>.
We are on the latest ACE.
> On Aug 8, 2019, at 9:56 AM, Mark Hanson <mh...@pivotal.io> wrote:
>
> The latest ACE framework seems to have support, but I don’t know how far off latest we are. I don’t think we test anything in an IPv6 context, so I would say no that we don’t officially support it in the client. Given some time, I could do some testing..
>
> Thanks,
> Mark
>
>> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
>>
>> I'm sure someone will chime in with a more definitive answer, but I'm
>> pretty certain the answer is no, sorry.
>>
>> Thanks,
>>
>> Blake
>>
>>
>>> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech> wrote:
>>>
>>> Hi,
>>>
>>>
>>> can you tell me does geode-native client support ipv6?
>>>
>>>
>>> BR,
>>>
>>> Mario
>>>
>
Re: geode-native ipv6
Posted by Mark Hanson <mh...@pivotal.io>.
The latest ACE framework seems to have support, but I don’t know how far off latest we are. I don’t think we test anything in an IPv6 context, so I would say no that we don’t officially support it in the client. Given some time, I could do some testing..
Thanks,
Mark
> On Aug 8, 2019, at 7:35 AM, Blake Bender <bb...@pivotal.io> wrote:
>
> I'm sure someone will chime in with a more definitive answer, but I'm
> pretty certain the answer is no, sorry.
>
> Thanks,
>
> Blake
>
>
> On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech> wrote:
>
>> Hi,
>>
>>
>> can you tell me does geode-native client support ipv6?
>>
>>
>> BR,
>>
>> Mario
>>
Re: geode-native ipv6
Posted by Blake Bender <bb...@pivotal.io>.
I'm sure someone will chime in with a more definitive answer, but I'm
pretty certain the answer is no, sorry.
Thanks,
Blake
On Thu, Aug 8, 2019 at 4:28 AM Mario Ivanac <ma...@est.tech> wrote:
> Hi,
>
>
> can you tell me does geode-native client support ipv6?
>
>
> BR,
>
> Mario
>