You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@accumulo.apache.org by ameet kini <am...@gmail.com> on 2012/09/21 16:42:32 UTC
bulk ingested table showing zero entries on the monitor page
I'm ingesting a table using the AccumuloFileOutputFormat similar to the
bulk ingest example. Scanning the table via the shell, I see that the
entries are there. But on the monitor page, the table shows up as having
zero entries. So I went back to running the bulk ingest example itself, and
indeed, the "test_table" shows up as also having zero entries. Any one else
seen this? I'm guessing/hoping its just a UI issue and won't affect
querying the contents of the table.
Thanks,
Ameet
Re: bulk ingested table showing zero entries on the monitor page
Posted by Eric Newton <er...@gmail.com>.
This should be fixed. See ACCUMULO-771.
On Fri, Sep 21, 2012 at 4:45 PM, Adam Fuchs <af...@apache.org> wrote:
> John is referring to the streaming ingest, not the bulk ingest. Dave is
> correct on this one. Basically, we don't count the records when you bulk
> ingest so that we can get sub-linear runtime on the bulk ingest operation.
>
> Adam
>
>
> On Fri, Sep 21, 2012 at 4:22 PM, ameet kini <am...@gmail.com> wrote:
>
>>
>> I was expecting that to be updated, but it doesn't.
>>
>> Thanks,
>> Ameet
>>
>>
>> On Fri, Sep 21, 2012 at 11:30 AM, John Vines <vi...@apache.org> wrote:
>>
>>> You should see the stats for entries in memory update on the master
>>> portion of the monitor page. It may take a few seconds for it to update.
>>>
>>> John
>>>
>>>
>>> On Fri, Sep 21, 2012 at 10:53 AM, ameet kini <am...@gmail.com>wrote:
>>>
>>>>
>>>> Got it, I just forced a compaction and saw the entries show up on the
>>>> monitor.
>>>>
>>>> Thanks!
>>>>
>>>> Ameet
>>>>
>>>>
>>>> On Fri, Sep 21, 2012 at 10:44 AM, <dl...@comcast.net> wrote:
>>>>
>>>>> The number of entries will show up on the monitor after a compaction.
>>>>>
>>>>>
>>>>>
>>>>> Dave
>>>>>
>>>>> ------------------------------
>>>>>
>>>>> *From: *"ameet kini" <am...@gmail.com>
>>>>> *To: *user@accumulo.apache.org
>>>>> *Sent: *Friday, September 21, 2012 10:42:32 AM
>>>>> *Subject: *bulk ingested table showing zero entries on the monitor
>>>>> page
>>>>>
>>>>>
>>>>>
>>>>> I'm ingesting a table using the AccumuloFileOutputFormat similar to
>>>>> the bulk ingest example. Scanning the table via the shell, I see that the
>>>>> entries are there. But on the monitor page, the table shows up as having
>>>>> zero entries. So I went back to running the bulk ingest example itself, and
>>>>> indeed, the "test_table" shows up as also having zero entries. Any one else
>>>>> seen this? I'm guessing/hoping its just a UI issue and won't affect
>>>>> querying the contents of the table.
>>>>>
>>>>> Thanks,
>>>>> Ameet
>>>>>
>>>>
>>>>
>>>
>>
>
Re: bulk ingested table showing zero entries on the monitor page
Posted by Adam Fuchs <af...@apache.org>.
John is referring to the streaming ingest, not the bulk ingest. Dave is
correct on this one. Basically, we don't count the records when you bulk
ingest so that we can get sub-linear runtime on the bulk ingest operation.
Adam
On Fri, Sep 21, 2012 at 4:22 PM, ameet kini <am...@gmail.com> wrote:
>
> I was expecting that to be updated, but it doesn't.
>
> Thanks,
> Ameet
>
>
> On Fri, Sep 21, 2012 at 11:30 AM, John Vines <vi...@apache.org> wrote:
>
>> You should see the stats for entries in memory update on the master
>> portion of the monitor page. It may take a few seconds for it to update.
>>
>> John
>>
>>
>> On Fri, Sep 21, 2012 at 10:53 AM, ameet kini <am...@gmail.com> wrote:
>>
>>>
>>> Got it, I just forced a compaction and saw the entries show up on the
>>> monitor.
>>>
>>> Thanks!
>>>
>>> Ameet
>>>
>>>
>>> On Fri, Sep 21, 2012 at 10:44 AM, <dl...@comcast.net> wrote:
>>>
>>>> The number of entries will show up on the monitor after a compaction.
>>>>
>>>>
>>>>
>>>> Dave
>>>>
>>>> ------------------------------
>>>>
>>>> *From: *"ameet kini" <am...@gmail.com>
>>>> *To: *user@accumulo.apache.org
>>>> *Sent: *Friday, September 21, 2012 10:42:32 AM
>>>> *Subject: *bulk ingested table showing zero entries on the monitor page
>>>>
>>>>
>>>>
>>>> I'm ingesting a table using the AccumuloFileOutputFormat similar to the
>>>> bulk ingest example. Scanning the table via the shell, I see that the
>>>> entries are there. But on the monitor page, the table shows up as having
>>>> zero entries. So I went back to running the bulk ingest example itself, and
>>>> indeed, the "test_table" shows up as also having zero entries. Any one else
>>>> seen this? I'm guessing/hoping its just a UI issue and won't affect
>>>> querying the contents of the table.
>>>>
>>>> Thanks,
>>>> Ameet
>>>>
>>>
>>>
>>
>
Re: bulk ingested table showing zero entries on the monitor page
Posted by ameet kini <am...@gmail.com>.
I was expecting that to be updated, but it doesn't.
Thanks,
Ameet
On Fri, Sep 21, 2012 at 11:30 AM, John Vines <vi...@apache.org> wrote:
> You should see the stats for entries in memory update on the master
> portion of the monitor page. It may take a few seconds for it to update.
>
> John
>
>
> On Fri, Sep 21, 2012 at 10:53 AM, ameet kini <am...@gmail.com> wrote:
>
>>
>> Got it, I just forced a compaction and saw the entries show up on the
>> monitor.
>>
>> Thanks!
>>
>> Ameet
>>
>>
>> On Fri, Sep 21, 2012 at 10:44 AM, <dl...@comcast.net> wrote:
>>
>>> The number of entries will show up on the monitor after a compaction.
>>>
>>>
>>>
>>> Dave
>>>
>>> ------------------------------
>>>
>>> *From: *"ameet kini" <am...@gmail.com>
>>> *To: *user@accumulo.apache.org
>>> *Sent: *Friday, September 21, 2012 10:42:32 AM
>>> *Subject: *bulk ingested table showing zero entries on the monitor page
>>>
>>>
>>>
>>> I'm ingesting a table using the AccumuloFileOutputFormat similar to the
>>> bulk ingest example. Scanning the table via the shell, I see that the
>>> entries are there. But on the monitor page, the table shows up as having
>>> zero entries. So I went back to running the bulk ingest example itself, and
>>> indeed, the "test_table" shows up as also having zero entries. Any one else
>>> seen this? I'm guessing/hoping its just a UI issue and won't affect
>>> querying the contents of the table.
>>>
>>> Thanks,
>>> Ameet
>>>
>>
>>
>
Re: bulk ingested table showing zero entries on the monitor page
Posted by John Vines <vi...@apache.org>.
You should see the stats for entries in memory update on the master portion
of the monitor page. It may take a few seconds for it to update.
John
On Fri, Sep 21, 2012 at 10:53 AM, ameet kini <am...@gmail.com> wrote:
>
> Got it, I just forced a compaction and saw the entries show up on the
> monitor.
>
> Thanks!
>
> Ameet
>
>
> On Fri, Sep 21, 2012 at 10:44 AM, <dl...@comcast.net> wrote:
>
>> The number of entries will show up on the monitor after a compaction.
>>
>>
>>
>> Dave
>>
>> ------------------------------
>>
>> *From: *"ameet kini" <am...@gmail.com>
>> *To: *user@accumulo.apache.org
>> *Sent: *Friday, September 21, 2012 10:42:32 AM
>> *Subject: *bulk ingested table showing zero entries on the monitor page
>>
>>
>>
>> I'm ingesting a table using the AccumuloFileOutputFormat similar to the
>> bulk ingest example. Scanning the table via the shell, I see that the
>> entries are there. But on the monitor page, the table shows up as having
>> zero entries. So I went back to running the bulk ingest example itself, and
>> indeed, the "test_table" shows up as also having zero entries. Any one else
>> seen this? I'm guessing/hoping its just a UI issue and won't affect
>> querying the contents of the table.
>>
>> Thanks,
>> Ameet
>>
>
>
Re: bulk ingested table showing zero entries on the monitor page
Posted by ameet kini <am...@gmail.com>.
Got it, I just forced a compaction and saw the entries show up on the
monitor.
Thanks!
Ameet
On Fri, Sep 21, 2012 at 10:44 AM, <dl...@comcast.net> wrote:
> The number of entries will show up on the monitor after a compaction.
>
>
>
> Dave
>
> ------------------------------
>
> *From: *"ameet kini" <am...@gmail.com>
> *To: *user@accumulo.apache.org
> *Sent: *Friday, September 21, 2012 10:42:32 AM
> *Subject: *bulk ingested table showing zero entries on the monitor page
>
>
>
> I'm ingesting a table using the AccumuloFileOutputFormat similar to the
> bulk ingest example. Scanning the table via the shell, I see that the
> entries are there. But on the monitor page, the table shows up as having
> zero entries. So I went back to running the bulk ingest example itself, and
> indeed, the "test_table" shows up as also having zero entries. Any one else
> seen this? I'm guessing/hoping its just a UI issue and won't affect
> querying the contents of the table.
>
> Thanks,
> Ameet
>
Re: bulk ingested table showing zero entries on the monitor page
Posted by dl...@comcast.net.
The number of entries will show up on the monitor after a compaction.
Dave
----- Original Message -----
From: "ameet kini" <am...@gmail.com>
To: user@accumulo.apache.org
Sent: Friday, September 21, 2012 10:42:32 AM
Subject: bulk ingested table showing zero entries on the monitor page
I'm ingesting a table using the AccumuloFileOutputFormat similar to the bulk ingest example. Scanning the table via the shell, I see that the entries are there. But on the monitor page, the table shows up as having zero entries. So I went back to running the bulk ingest example itself, and indeed, the "test_table" shows up as also having zero entries. Any one else seen this? I'm guessing/hoping its just a UI issue and won't affect querying the contents of the table.
Thanks,
Ameet