You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@jmeter.apache.org by "Woodcock, Simon" <sw...@qualcomm.com> on 2009/01/07 15:07:39 UTC

Generate Summary Results - Incorrect Calculations?

Help please . .

I'm I misinterpreting the summary results? Take the following for example . .

Generate Summary Results +   127 in  14.4s =    8.8/s Avg:   122 Min:     7 Max: 783 Err:     0 (0.00%)
Generate Summary Results +  7681 in 179.9s =   42.7/s Avg:  1269 Min:     1 Max: 17388 Err:     0 (0.00%)
Generate Summary Results =  7808 in 194.3s =   40.2/s Avg:  1251 Min:     1 Max: 17388 Err:     0 (0.00%)
Generate Summary Results + 10258 in 192.9s =   53.2/s Avg:  3589 Min:     1 Max: 43845 Err:     3 (0.03%)
Generate Summary Results = 18066 in 374.3s =   48.3/s Avg:  2578 Min:     1 Max: 43845 Err:     3 (0.02%)
Generate Summary Results + 11856 in 188.9s =   62.8/s Avg:  2683 Min:     0 Max: 45321 Err:     6 (0.05%)
Generate Summary Results = 29922 in 554.4s =   54.0/s Avg:  2620 Min:     0 Max: 45321 Err:     9 (0.03%)

Total number of requests are an addition of requests made in each interval -  127+7681+10258+11856 = 29922

Total time would then, you would assume, be an addition of each of the interval times - 14.4+179.9+192.9+188.9 = 576.1s
However, total time seems to be calculated as -  14.4+180+180+180 = 554.4s

Where 180s is the default interval time.

When calculating total request per second, the calculation is:

29922 / 554.4 = 53.97 requests per second

As opposed to:

29922 / 576.1 = 51.94 requests per second

Is there not a discrepancy in the total elapsed time and therefore the requests per second or am I completely misunderstanding the results given?

Any help clarifying this would be greatly appreciated.


Thanks in advance,


Simon.

--
Simon Woodcock
Staff Engineer / Manager

QUALCOMM Poole Limited
Voyager House, 253-257 High Street North, Poole, Dorset, BH15 1DX UK
Tel: +44 (0)1202 440610, Fax: +44 (0)1202 440601
www.qualcomm.com<http://www.qualcomm.com>
This e-mail transmission, and any documents, files or previous e-mail messages attached to it, may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. Interception of e-mail is a crime under the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and 2107-2709. If you have received this transmission in error, please immediately notify me by reply e-mail at simon.woodcock@qualcomm.com<ma...@qualcomm.com> or by telephone at +44 (0)1202 207397 and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you.


Re: Generate Summary Results - Incorrect Calculations?

Posted by Peter Lin <wo...@gmail.com>.
the min time is the first record in the .jtl file.  The max time is
the last record.

the duraction is max - min.

peter

On Wed, Jan 7, 2009 at 10:40 AM, Woodcock, Simon <sw...@qualcomm.com> wrote:
> Sebb,
>
> The results are logging to a .jtl file, the test is set to loop 'forever'.
>
> Could you explain in more detail what you mean by checking the 'min start time' and the 'max end time'.
>
> Thanks,
>
>
> Simon.
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


Re: Generate Summary Results - Incorrect Calculations?

Posted by sebb <se...@gmail.com>.
Assuming that you are using the default timestamp - which is start time.
(This is defined in jmeter.properties and logged in jmeter.log)

then you need minimum(timestamp) and maximum(timestamp + elapsed).

If using end times, then you would need:

minimum(timestamp-elapsed) and the maximum(timestamp)

but that is not likely.

On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
> Sebb,
>
>  The results are logging to a .jtl file, the test is set to loop 'forever'.
>
>  Could you explain in more detail what you mean by checking the 'min start time' and the 'max end time'.
>
>  Thanks,
>
>
>
>  Simon.
>
>  -----Original Message-----
>  From: sebb [mailto:sebbaz@gmail.com]
>
> Sent: 07 January 2009 15:06
>  To: JMeter Users List
>  Subject: Re: Generate Summary Results - Incorrect Calculations?
>
>  On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
>  > Thanks for your prompt response Sebb. Apologies for the cross-post.
>  >
>  >  So you are confident that results given ( requests per second ) for both the interval and total times are accurate and that there are no known bugs in this area?
>
>  Reasonably so.
>
>  If you have saved the individual results to a JTL file you can check
>  the overall results for yourself, by checking for the min start time
>  and the max end time.
>
>  >  Regards,
>  >
>  >
>  >  Simon.
>  >
>  >
>  >  -----Original Message-----
>  >  From: sebb [mailto:sebbaz@gmail.com]
>  >  Sent: 07 January 2009 14:29
>  >  To: JMeter Users List
>  >  Subject: Re: Generate Summary Results - Incorrect Calculations?
>  >
>  >  [Cross-post to JMeter-dev list removed]
>  >
>  >  On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
>  >  > Help please . .
>  >  >
>  >  >  I'm I misinterpreting the summary results? Take the following for example . .
>  >  >
>  >  >  Generate Summary Results +   127 in  14.4s =    8.8/s Avg:   122 Min:     7 Max: 783 Err:     0 (0.00%)
>  >  >  Generate Summary Results +  7681 in 179.9s =   42.7/s Avg:  1269 Min:     1 Max: 17388 Err:     0 (0.00%)
>  >  >  Generate Summary Results =  7808 in 194.3s =   40.2/s Avg:  1251 Min:     1 Max: 17388 Err:     0 (0.00%)
>  >  >  Generate Summary Results + 10258 in 192.9s =   53.2/s Avg:  3589 Min:     1 Max: 43845 Err:     3 (0.03%)
>  >  >  Generate Summary Results = 18066 in 374.3s =   48.3/s Avg:  2578 Min:     1 Max: 43845 Err:     3 (0.02%)
>  >  >  Generate Summary Results + 11856 in 188.9s =   62.8/s Avg:  2683 Min:     0 Max: 45321 Err:     6 (0.05%)
>  >  >  Generate Summary Results = 29922 in 554.4s =   54.0/s Avg:  2620 Min:     0 Max: 45321 Err:     9 (0.03%)
>  >  >
>  >  >  Total number of requests are an addition of requests made in each interval -  127+7681+10258+11856 = 29922
>  >
>  >  Agreed.
>  >
>  >  >  Total time would then, you would assume, be an addition of each of the interval times - 14.4+179.9+192.9+188.9 = 576.1s
>  >
>  >  No, the total time is calculated independently from the first and last
>  >  times seen.
>  >
>  >  The variation is due to timer resolution.
>  >
>  >  >  However, total time seems to be calculated as -  14.4+180+180+180 = 554.4s
>  >  >
>  >  >  Where 180s is the default interval time.
>  >  >
>  >  >  When calculating total request per second, the calculation is:
>  >  >
>  >  >  29922 / 554.4 = 53.97 requests per second
>  >  >
>  >  >  As opposed to:
>  >  >
>  >  >  29922 / 576.1 = 51.94 requests per second
>  >  >
>  >  >  Is there not a discrepancy in the total elapsed time and therefore the requests per second or am I completely misunderstanding the results given?
>  >
>  >  See above.
>  >
>  >  >  Any help clarifying this would be greatly appreciated.
>  >  >
>  >  >
>  >  >  Thanks in advance,
>  >  >
>  >  >
>  >  >  Simon.
>  >  >
>  >  >  --
>  >  >  Simon Woodcock
>  >  >  Staff Engineer / Manager
>  >  >
>  >  >  QUALCOMM Poole Limited
>  >  >  Voyager House, 253-257 High Street North, Poole, Dorset, BH15 1DX UK
>  >  >  Tel: +44 (0)1202 440610, Fax: +44 (0)1202 440601
>  >  >  www.qualcomm.com<http://www.qualcomm.com>
>  >  >  This e-mail transmission, and any documents, files or previous e-mail messages attached to it, may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. Interception of e-mail is a crime under the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and 2107-2709. If you have received this transmission in error, please immediately notify me by reply e-mail at simon.woodcock@qualcomm.com<ma...@qualcomm.com> or by telephone at +44 (0)1202 207397 and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you.
>  >  >
>  >  >
>  >
>  >
>  > ---------------------------------------------------------------------
>  >  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  >  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>  >
>  >
>  >  ---------------------------------------------------------------------
>  >  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  >  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>  >
>  >
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


RE: Generate Summary Results - Incorrect Calculations?

Posted by "Woodcock, Simon" <sw...@qualcomm.com>.
Sebb,

The results are logging to a .jtl file, the test is set to loop 'forever'.

Could you explain in more detail what you mean by checking the 'min start time' and the 'max end time'.

Thanks,


Simon.

-----Original Message-----
From: sebb [mailto:sebbaz@gmail.com] 
Sent: 07 January 2009 15:06
To: JMeter Users List
Subject: Re: Generate Summary Results - Incorrect Calculations?

On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
> Thanks for your prompt response Sebb. Apologies for the cross-post.
>
>  So you are confident that results given ( requests per second ) for both the interval and total times are accurate and that there are no known bugs in this area?

Reasonably so.

If you have saved the individual results to a JTL file you can check
the overall results for yourself, by checking for the min start time
and the max end time.

>  Regards,
>
>
>  Simon.
>
>
>  -----Original Message-----
>  From: sebb [mailto:sebbaz@gmail.com]
>  Sent: 07 January 2009 14:29
>  To: JMeter Users List
>  Subject: Re: Generate Summary Results - Incorrect Calculations?
>
>  [Cross-post to JMeter-dev list removed]
>
>  On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
>  > Help please . .
>  >
>  >  I'm I misinterpreting the summary results? Take the following for example . .
>  >
>  >  Generate Summary Results +   127 in  14.4s =    8.8/s Avg:   122 Min:     7 Max: 783 Err:     0 (0.00%)
>  >  Generate Summary Results +  7681 in 179.9s =   42.7/s Avg:  1269 Min:     1 Max: 17388 Err:     0 (0.00%)
>  >  Generate Summary Results =  7808 in 194.3s =   40.2/s Avg:  1251 Min:     1 Max: 17388 Err:     0 (0.00%)
>  >  Generate Summary Results + 10258 in 192.9s =   53.2/s Avg:  3589 Min:     1 Max: 43845 Err:     3 (0.03%)
>  >  Generate Summary Results = 18066 in 374.3s =   48.3/s Avg:  2578 Min:     1 Max: 43845 Err:     3 (0.02%)
>  >  Generate Summary Results + 11856 in 188.9s =   62.8/s Avg:  2683 Min:     0 Max: 45321 Err:     6 (0.05%)
>  >  Generate Summary Results = 29922 in 554.4s =   54.0/s Avg:  2620 Min:     0 Max: 45321 Err:     9 (0.03%)
>  >
>  >  Total number of requests are an addition of requests made in each interval -  127+7681+10258+11856 = 29922
>
>  Agreed.
>
>  >  Total time would then, you would assume, be an addition of each of the interval times - 14.4+179.9+192.9+188.9 = 576.1s
>
>  No, the total time is calculated independently from the first and last
>  times seen.
>
>  The variation is due to timer resolution.
>
>  >  However, total time seems to be calculated as -  14.4+180+180+180 = 554.4s
>  >
>  >  Where 180s is the default interval time.
>  >
>  >  When calculating total request per second, the calculation is:
>  >
>  >  29922 / 554.4 = 53.97 requests per second
>  >
>  >  As opposed to:
>  >
>  >  29922 / 576.1 = 51.94 requests per second
>  >
>  >  Is there not a discrepancy in the total elapsed time and therefore the requests per second or am I completely misunderstanding the results given?
>
>  See above.
>
>  >  Any help clarifying this would be greatly appreciated.
>  >
>  >
>  >  Thanks in advance,
>  >
>  >
>  >  Simon.
>  >
>  >  --
>  >  Simon Woodcock
>  >  Staff Engineer / Manager
>  >
>  >  QUALCOMM Poole Limited
>  >  Voyager House, 253-257 High Street North, Poole, Dorset, BH15 1DX UK
>  >  Tel: +44 (0)1202 440610, Fax: +44 (0)1202 440601
>  >  www.qualcomm.com<http://www.qualcomm.com>
>  >  This e-mail transmission, and any documents, files or previous e-mail messages attached to it, may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. Interception of e-mail is a crime under the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and 2107-2709. If you have received this transmission in error, please immediately notify me by reply e-mail at simon.woodcock@qualcomm.com<ma...@qualcomm.com> or by telephone at +44 (0)1202 207397 and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you.
>  >
>  >
>
>
> ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


Re: Generate Summary Results - Incorrect Calculations?

Posted by sebb <se...@gmail.com>.
On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
> Thanks for your prompt response Sebb. Apologies for the cross-post.
>
>  So you are confident that results given ( requests per second ) for both the interval and total times are accurate and that there are no known bugs in this area?

Reasonably so.

If you have saved the individual results to a JTL file you can check
the overall results for yourself, by checking for the min start time
and the max end time.

>  Regards,
>
>
>  Simon.
>
>
>  -----Original Message-----
>  From: sebb [mailto:sebbaz@gmail.com]
>  Sent: 07 January 2009 14:29
>  To: JMeter Users List
>  Subject: Re: Generate Summary Results - Incorrect Calculations?
>
>  [Cross-post to JMeter-dev list removed]
>
>  On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
>  > Help please . .
>  >
>  >  I'm I misinterpreting the summary results? Take the following for example . .
>  >
>  >  Generate Summary Results +   127 in  14.4s =    8.8/s Avg:   122 Min:     7 Max: 783 Err:     0 (0.00%)
>  >  Generate Summary Results +  7681 in 179.9s =   42.7/s Avg:  1269 Min:     1 Max: 17388 Err:     0 (0.00%)
>  >  Generate Summary Results =  7808 in 194.3s =   40.2/s Avg:  1251 Min:     1 Max: 17388 Err:     0 (0.00%)
>  >  Generate Summary Results + 10258 in 192.9s =   53.2/s Avg:  3589 Min:     1 Max: 43845 Err:     3 (0.03%)
>  >  Generate Summary Results = 18066 in 374.3s =   48.3/s Avg:  2578 Min:     1 Max: 43845 Err:     3 (0.02%)
>  >  Generate Summary Results + 11856 in 188.9s =   62.8/s Avg:  2683 Min:     0 Max: 45321 Err:     6 (0.05%)
>  >  Generate Summary Results = 29922 in 554.4s =   54.0/s Avg:  2620 Min:     0 Max: 45321 Err:     9 (0.03%)
>  >
>  >  Total number of requests are an addition of requests made in each interval -  127+7681+10258+11856 = 29922
>
>  Agreed.
>
>  >  Total time would then, you would assume, be an addition of each of the interval times - 14.4+179.9+192.9+188.9 = 576.1s
>
>  No, the total time is calculated independently from the first and last
>  times seen.
>
>  The variation is due to timer resolution.
>
>  >  However, total time seems to be calculated as -  14.4+180+180+180 = 554.4s
>  >
>  >  Where 180s is the default interval time.
>  >
>  >  When calculating total request per second, the calculation is:
>  >
>  >  29922 / 554.4 = 53.97 requests per second
>  >
>  >  As opposed to:
>  >
>  >  29922 / 576.1 = 51.94 requests per second
>  >
>  >  Is there not a discrepancy in the total elapsed time and therefore the requests per second or am I completely misunderstanding the results given?
>
>  See above.
>
>  >  Any help clarifying this would be greatly appreciated.
>  >
>  >
>  >  Thanks in advance,
>  >
>  >
>  >  Simon.
>  >
>  >  --
>  >  Simon Woodcock
>  >  Staff Engineer / Manager
>  >
>  >  QUALCOMM Poole Limited
>  >  Voyager House, 253-257 High Street North, Poole, Dorset, BH15 1DX UK
>  >  Tel: +44 (0)1202 440610, Fax: +44 (0)1202 440601
>  >  www.qualcomm.com<http://www.qualcomm.com>
>  >  This e-mail transmission, and any documents, files or previous e-mail messages attached to it, may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. Interception of e-mail is a crime under the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and 2107-2709. If you have received this transmission in error, please immediately notify me by reply e-mail at simon.woodcock@qualcomm.com<ma...@qualcomm.com> or by telephone at +44 (0)1202 207397 and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you.
>  >
>  >
>
>
> ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


RE: Generate Summary Results - Incorrect Calculations?

Posted by "Woodcock, Simon" <sw...@qualcomm.com>.
Thanks for your prompt response Sebb. Apologies for the cross-post.

So you are confident that results given ( requests per second ) for both the interval and total times are accurate and that there are no known bugs in this area?

Regards,


Simon. 

-----Original Message-----
From: sebb [mailto:sebbaz@gmail.com] 
Sent: 07 January 2009 14:29
To: JMeter Users List
Subject: Re: Generate Summary Results - Incorrect Calculations?

[Cross-post to JMeter-dev list removed]

On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
> Help please . .
>
>  I'm I misinterpreting the summary results? Take the following for example . .
>
>  Generate Summary Results +   127 in  14.4s =    8.8/s Avg:   122 Min:     7 Max: 783 Err:     0 (0.00%)
>  Generate Summary Results +  7681 in 179.9s =   42.7/s Avg:  1269 Min:     1 Max: 17388 Err:     0 (0.00%)
>  Generate Summary Results =  7808 in 194.3s =   40.2/s Avg:  1251 Min:     1 Max: 17388 Err:     0 (0.00%)
>  Generate Summary Results + 10258 in 192.9s =   53.2/s Avg:  3589 Min:     1 Max: 43845 Err:     3 (0.03%)
>  Generate Summary Results = 18066 in 374.3s =   48.3/s Avg:  2578 Min:     1 Max: 43845 Err:     3 (0.02%)
>  Generate Summary Results + 11856 in 188.9s =   62.8/s Avg:  2683 Min:     0 Max: 45321 Err:     6 (0.05%)
>  Generate Summary Results = 29922 in 554.4s =   54.0/s Avg:  2620 Min:     0 Max: 45321 Err:     9 (0.03%)
>
>  Total number of requests are an addition of requests made in each interval -  127+7681+10258+11856 = 29922

Agreed.

>  Total time would then, you would assume, be an addition of each of the interval times - 14.4+179.9+192.9+188.9 = 576.1s

No, the total time is calculated independently from the first and last
times seen.

The variation is due to timer resolution.

>  However, total time seems to be calculated as -  14.4+180+180+180 = 554.4s
>
>  Where 180s is the default interval time.
>
>  When calculating total request per second, the calculation is:
>
>  29922 / 554.4 = 53.97 requests per second
>
>  As opposed to:
>
>  29922 / 576.1 = 51.94 requests per second
>
>  Is there not a discrepancy in the total elapsed time and therefore the requests per second or am I completely misunderstanding the results given?

See above.

>  Any help clarifying this would be greatly appreciated.
>
>
>  Thanks in advance,
>
>
>  Simon.
>
>  --
>  Simon Woodcock
>  Staff Engineer / Manager
>
>  QUALCOMM Poole Limited
>  Voyager House, 253-257 High Street North, Poole, Dorset, BH15 1DX UK
>  Tel: +44 (0)1202 440610, Fax: +44 (0)1202 440601
>  www.qualcomm.com<http://www.qualcomm.com>
>  This e-mail transmission, and any documents, files or previous e-mail messages attached to it, may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. Interception of e-mail is a crime under the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and 2107-2709. If you have received this transmission in error, please immediately notify me by reply e-mail at simon.woodcock@qualcomm.com<ma...@qualcomm.com> or by telephone at +44 (0)1202 207397 and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you.
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


Re: Generate Summary Results - Incorrect Calculations?

Posted by sebb <se...@gmail.com>.
[Cross-post to JMeter-dev list removed]

On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
> Help please . .
>
>  I'm I misinterpreting the summary results? Take the following for example . .
>
>  Generate Summary Results +   127 in  14.4s =    8.8/s Avg:   122 Min:     7 Max: 783 Err:     0 (0.00%)
>  Generate Summary Results +  7681 in 179.9s =   42.7/s Avg:  1269 Min:     1 Max: 17388 Err:     0 (0.00%)
>  Generate Summary Results =  7808 in 194.3s =   40.2/s Avg:  1251 Min:     1 Max: 17388 Err:     0 (0.00%)
>  Generate Summary Results + 10258 in 192.9s =   53.2/s Avg:  3589 Min:     1 Max: 43845 Err:     3 (0.03%)
>  Generate Summary Results = 18066 in 374.3s =   48.3/s Avg:  2578 Min:     1 Max: 43845 Err:     3 (0.02%)
>  Generate Summary Results + 11856 in 188.9s =   62.8/s Avg:  2683 Min:     0 Max: 45321 Err:     6 (0.05%)
>  Generate Summary Results = 29922 in 554.4s =   54.0/s Avg:  2620 Min:     0 Max: 45321 Err:     9 (0.03%)
>
>  Total number of requests are an addition of requests made in each interval -  127+7681+10258+11856 = 29922

Agreed.

>  Total time would then, you would assume, be an addition of each of the interval times - 14.4+179.9+192.9+188.9 = 576.1s

No, the total time is calculated independently from the first and last
times seen.

The variation is due to timer resolution.

>  However, total time seems to be calculated as -  14.4+180+180+180 = 554.4s
>
>  Where 180s is the default interval time.
>
>  When calculating total request per second, the calculation is:
>
>  29922 / 554.4 = 53.97 requests per second
>
>  As opposed to:
>
>  29922 / 576.1 = 51.94 requests per second
>
>  Is there not a discrepancy in the total elapsed time and therefore the requests per second or am I completely misunderstanding the results given?

See above.

>  Any help clarifying this would be greatly appreciated.
>
>
>  Thanks in advance,
>
>
>  Simon.
>
>  --
>  Simon Woodcock
>  Staff Engineer / Manager
>
>  QUALCOMM Poole Limited
>  Voyager House, 253-257 High Street North, Poole, Dorset, BH15 1DX UK
>  Tel: +44 (0)1202 440610, Fax: +44 (0)1202 440601
>  www.qualcomm.com<http://www.qualcomm.com>
>  This e-mail transmission, and any documents, files or previous e-mail messages attached to it, may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. Interception of e-mail is a crime under the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and 2107-2709. If you have received this transmission in error, please immediately notify me by reply e-mail at simon.woodcock@qualcomm.com<ma...@qualcomm.com> or by telephone at +44 (0)1202 207397 and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you.
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


Re: Generate Summary Results - Incorrect Calculations?

Posted by sebb <se...@gmail.com>.
Please don't cross-post. This is not a message for the JMeter-dev list.

On 07/01/2009, Woodcock, Simon <sw...@qualcomm.com> wrote:
> Help please . .
>
>  I'm I misinterpreting the summary results? Take the following for example . .
>
>  Generate Summary Results +   127 in  14.4s =    8.8/s Avg:   122 Min:     7 Max: 783 Err:     0 (0.00%)
>  Generate Summary Results +  7681 in 179.9s =   42.7/s Avg:  1269 Min:     1 Max: 17388 Err:     0 (0.00%)
>  Generate Summary Results =  7808 in 194.3s =   40.2/s Avg:  1251 Min:     1 Max: 17388 Err:     0 (0.00%)
>  Generate Summary Results + 10258 in 192.9s =   53.2/s Avg:  3589 Min:     1 Max: 43845 Err:     3 (0.03%)
>  Generate Summary Results = 18066 in 374.3s =   48.3/s Avg:  2578 Min:     1 Max: 43845 Err:     3 (0.02%)
>  Generate Summary Results + 11856 in 188.9s =   62.8/s Avg:  2683 Min:     0 Max: 45321 Err:     6 (0.05%)
>  Generate Summary Results = 29922 in 554.4s =   54.0/s Avg:  2620 Min:     0 Max: 45321 Err:     9 (0.03%)
>
>  Total number of requests are an addition of requests made in each interval -  127+7681+10258+11856 = 29922
>
>  Total time would then, you would assume, be an addition of each of the interval times - 14.4+179.9+192.9+188.9 = 576.1s
>  However, total time seems to be calculated as -  14.4+180+180+180 = 554.4s
>
>  Where 180s is the default interval time.
>
>  When calculating total request per second, the calculation is:
>
>  29922 / 554.4 = 53.97 requests per second
>
>  As opposed to:
>
>  29922 / 576.1 = 51.94 requests per second
>
>  Is there not a discrepancy in the total elapsed time and therefore the requests per second or am I completely misunderstanding the results given?
>
>  Any help clarifying this would be greatly appreciated.
>
>
>  Thanks in advance,
>
>
>  Simon.
>
>  --
>  Simon Woodcock
>  Staff Engineer / Manager
>
>  QUALCOMM Poole Limited
>  Voyager House, 253-257 High Street North, Poole, Dorset, BH15 1DX UK
>  Tel: +44 (0)1202 440610, Fax: +44 (0)1202 440601
>  www.qualcomm.com<http://www.qualcomm.com>
>  This e-mail transmission, and any documents, files or previous e-mail messages attached to it, may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. Interception of e-mail is a crime under the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and 2107-2709. If you have received this transmission in error, please immediately notify me by reply e-mail at simon.woodcock@qualcomm.com<ma...@qualcomm.com> or by telephone at +44 (0)1202 207397 and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you.
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-dev-help@jakarta.apache.org