You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@cloudstack.apache.org by ed...@apache.org on 2013/10/11 03:01:50 UTC
[47/67] [abbrv] [partial] Removing docs from master
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-clusters-vsphere.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-clusters-vsphere.xml b/docs/en-US/add-clusters-vsphere.xml
deleted file mode 100644
index c3a0902..0000000
--- a/docs/en-US/add-clusters-vsphere.xml
+++ /dev/null
@@ -1,178 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-clusters-vsphere">
- <title>Add Cluster: vSphere</title>
- <para>Host management for vSphere is done through a combination of vCenter and the &PRODUCT; admin
- UI. &PRODUCT; requires that all hosts be in a &PRODUCT; cluster, but the cluster may consist of
- a single host. As an administrator you must decide if you would like to use clusters of one host
- or of multiple hosts. Clusters of multiple hosts allow for features like live migration.
- Clusters also require shared storage such as NFS or iSCSI.</para>
- <para>For vSphere servers, we recommend creating the cluster of hosts in vCenter and then adding
- the entire cluster to &PRODUCT;. Follow these requirements:</para>
- <itemizedlist>
- <listitem>
- <para>Do not put more than 8 hosts in a vSphere cluster</para>
- </listitem>
- <listitem>
- <para>Make sure the hypervisor hosts do not have any VMs already running before you add them
- to &PRODUCT;.</para>
- </listitem>
- </itemizedlist>
- <para>To add a vSphere cluster to &PRODUCT;:</para>
- <orderedlist>
- <listitem>
- <para>Create the cluster of hosts in vCenter. Follow the vCenter instructions to do this. You
- will create a cluster that looks something like this in vCenter.</para>
- <mediaobject>
- <imageobject>
- <imagedata fileref="./images/vsphere-client.png"/>
- </imageobject>
- <textobject>
- <phrase>vsphereclient.png: vSphere client</phrase>
- </textobject>
- </mediaobject>
- </listitem>
- <listitem>
- <para>Log in to the UI.</para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Infrastructure. In Zones, click View More, then click the
- zone in which you want to add the cluster.</para>
- </listitem>
- <listitem>
- <para>Click the Compute tab, and click View All on Pods. Choose the pod to which you want to
- add the cluster.</para>
- </listitem>
- <listitem>
- <para>Click View Clusters.</para>
- </listitem>
- <listitem>
- <para>Click Add Cluster.</para>
- </listitem>
- <listitem>
- <para>In Hypervisor, choose VMware.</para>
- </listitem>
- <listitem>
- <para>Provide the following information in the dialog. The fields below make reference to the
- values from vCenter.</para>
- <mediaobject>
- <imageobject>
- <imagedata fileref="./images/add-cluster.png"/>
- </imageobject>
- <textobject>
- <phrase>addcluster.png: add a cluster</phrase>
- </textobject>
- </mediaobject>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Cluster Name</emphasis>: Enter the name of the cluster you
- created in vCenter. For example, "cloud.cluster.2.2.1"</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">vCenter Username</emphasis>: Enter the username that &PRODUCT;
- should use to connect to vCenter. This user must have all the administrative
- privileges.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">CPU overcommit ratio</emphasis>: Enter the CPU overcommit
- ratio for the cluster. The value you enter determines the CPU consumption of each VM in
- the selected cluster. By increasing the over-provisioning ratio, more resource capacity
- will be used. If no value is specified, the value is defaulted to 1, which implies no
- over-provisioning is done.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">RAM overcommit ratio</emphasis>: Enter the RAM overcommit
- ratio for the cluster. The value you enter determines the memory consumption of each VM
- in the selected cluster. By increasing the over-provisioning ratio, more resource
- capacity will be used. If no value is specified, the value is defaulted to 1, which
- implies no over-provisioning is done.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">vCenter Host</emphasis>: Enter the hostname or IP address of
- the vCenter server.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">vCenter Password</emphasis>: Enter the password for the user
- named above.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">vCenter Datacenter</emphasis>: Enter the vCenter datacenter
- that the cluster is in. For example, "cloud.dc.VM".</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Override Public Traffic</emphasis>: Enable this option to
- override the zone-wide public traffic for the cluster you are creating.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Public Traffic vSwitch Type</emphasis>: This option is
- displayed only if you enable the Override Public Traffic option. Select a desirable
- switch. If the vmware.use.dvswitch global parameter is true, the default option will be
- VMware vNetwork Distributed Virtual Switch.</para>
- <para>If you have enabled Nexus dvSwitch in the environment, the following parameters for
- dvSwitch configuration are displayed:</para>
- <itemizedlist>
- <listitem>
- <para>Nexus dvSwitch IP Address: The IP address of the Nexus VSM appliance.</para>
- </listitem>
- <listitem>
- <para>Nexus dvSwitch Username: The username required to access the Nexus VSM
- appliance.</para>
- </listitem>
- <listitem>
- <para>Nexus dvSwitch Password: The password associated with the username specified
- above.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Override Guest Traffic</emphasis>: Enable this option to
- override the zone-wide guest traffic for the cluster you are creating.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Guest Traffic vSwitch Type</emphasis>: This option is
- displayed only if you enable the Override Guest Traffic option. Select a desirable
- switch. </para>
- <para>If the vmware.use.dvswitch global parameter is true, the default option will be
- VMware vNetwork Distributed Virtual Switch.</para>
- <para>If you have enabled Nexus dvSwitch in the environment, the following parameters for
- dvSwitch configuration are displayed:</para>
- <itemizedlist>
- <listitem>
- <para>Nexus dvSwitch IP Address: The IP address of the Nexus VSM appliance.</para>
- </listitem>
- <listitem>
- <para>Nexus dvSwitch Username: The username required to access the Nexus VSM
- appliance.</para>
- </listitem>
- <listitem>
- <para>Nexus dvSwitch Password: The password associated with the username specified
- above.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>There might be a slight delay while the cluster is provisioned. It will
- automatically display in the UI.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- </orderedlist>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-gateway-vpc.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-gateway-vpc.xml b/docs/en-US/add-gateway-vpc.xml
deleted file mode 100644
index 403302d..0000000
--- a/docs/en-US/add-gateway-vpc.xml
+++ /dev/null
@@ -1,227 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-gateway-vpc">
- <title>Adding a Private Gateway to a VPC</title>
- <para>A private gateway can be added by the root admin only. The VPC private network has 1:1
- relationship with the NIC of the physical network. You can configure multiple private gateways
- to a single VPC. No gateways with duplicated VLAN and IP are allowed in the same data
- center.</para>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as an administrator or end user.</para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Network.</para>
- </listitem>
- <listitem>
- <para>In the Select view, select VPC.</para>
- <para>All the VPCs that you have created for the account is listed in the page.</para>
- </listitem>
- <listitem>
- <para>Click the Configure button of the VPC to which you want to configure load balancing
- rules.</para>
- <para>The VPC page is displayed where all the tiers you created are listed in a
- diagram.</para>
- </listitem>
- <listitem>
- <para>Click the Settings icon.</para>
- <para>The following options are displayed.</para>
- <itemizedlist>
- <listitem>
- <para>Internal LB</para>
- </listitem>
- <listitem>
- <para>Public LB IP</para>
- </listitem>
- <listitem>
- <para>Static NAT</para>
- </listitem>
- <listitem>
- <para>Virtual Machines</para>
- </listitem>
- <listitem>
- <para>CIDR</para>
- </listitem>
- </itemizedlist>
- <para>The following router information is displayed:</para>
- <itemizedlist>
- <listitem>
- <para>Private Gateways</para>
- </listitem>
- <listitem>
- <para>Public IP Addresses</para>
- </listitem>
- <listitem>
- <para>Site-to-Site VPNs</para>
- </listitem>
- <listitem>
- <para>Network ACL Lists</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>Select Private Gateways.</para>
- <para>The Gateways page is displayed.</para>
- </listitem>
- <listitem>
- <para>Click Add new gateway:</para>
- <mediaobject>
- <imageobject>
- <imagedata fileref="./images/add-new-gateway-vpc.png"/>
- </imageobject>
- <textobject>
- <phrase>add-new-gateway-vpc.png: adding a private gateway for the VPC.</phrase>
- </textobject>
- </mediaobject>
- </listitem>
- <listitem>
- <para>Specify the following:</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Physical Network</emphasis>: The physical network you have
- created in the zone.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">IP Address</emphasis>: The IP address associated with the VPC
- gateway.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Gateway</emphasis>: The gateway through which the traffic is
- routed to and from the VPC.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Netmask</emphasis>: The netmask associated with the VPC
- gateway.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">VLAN</emphasis>: The VLAN associated with the VPC
- gateway.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Source NAT</emphasis>: Select this option to enable the source
- NAT service on the VPC private gateway.</para>
- <para>See <xref linkend="sourcenat-private-gateway"/>.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">ACL</emphasis>: Controls both ingress and egress traffic on a
- VPC private gateway. By default, all the traffic is blocked.</para>
- <para>See <xref linkend="acl-private-gateway"/>.</para>
- </listitem>
- </itemizedlist>
- <para>The new gateway appears in the list. You can repeat these steps to add more gateway for
- this VPC.</para>
- </listitem>
- </orderedlist>
- <section id="sourcenat-private-gateway">
- <title>Source NAT on Private Gateway</title>
- <para>You might want to deploy multiple VPCs with the same super CIDR and guest tier CIDR.
- Therefore, multiple guest VMs from different VPCs can have the same IPs to reach a enterprise
- data center through the private gateway. In such cases, a NAT service need to be configured on
- the private gateway to avoid IP conflicts. If Source NAT is enabled, the guest VMs in VPC
- reaches the enterprise network via private gateway IP address by using the NAT service. </para>
- <para>The Source NAT service on a private gateway can be enabled while adding the private
- gateway. On deletion of a private gateway, source NAT rules specific to the private gateway
- are deleted.</para>
- <para>To enable source NAT on existing private gateways, delete them and create afresh with
- source NAT. </para>
- </section>
- <section id="acl-private-gateway">
- <title>ACL on Private Gateway</title>
- <para>The traffic on the VPC private gateway is controlled by creating both ingress and egress
- network ACL rules. The ACLs contains both allow and deny rules. As per the rule, all the
- ingress traffic to the private gateway interface and all the egress traffic out from the
- private gateway interface are blocked. </para>
- <para>You can change this default behaviour while creating a private gateway. Alternatively, you
- can do the following:</para>
- <orderedlist>
- <listitem>
- <para>In a VPC, identify the Private Gateway you want to work with.</para>
- </listitem>
- <listitem>
- <para>In the Private Gateway page, do either of the following:</para>
- <itemizedlist>
- <listitem>
- <para>Use the Quickview. See <xref linkend="quickview"/>.</para>
- </listitem>
- <listitem>
- <para>Use the Details tab. See <xref linkend="details-tab"/> through .</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem id="quickview">
- <para>In the Quickview of the selected Private Gateway, click Replace ACL, select the ACL
- rule, then click OK</para>
- </listitem>
- <listitem id="details-tab">
- <para>Click the IP address of the Private Gateway you want to work with.</para>
- </listitem>
- <listitem>
- <para>In the Detail tab, click the Replace ACL button. <inlinemediaobject>
- <imageobject>
- <imagedata fileref="./images/replace-acl-icon.png"/>
- </imageobject>
- <textobject>
- <phrase>replace-acl-icon.png: button to replace the default ACL behaviour.</phrase>
- </textobject>
- </inlinemediaobject></para>
- <para>The Replace ACL dialog is displayed.</para>
- </listitem>
- <listitem>
- <para>select the ACL rule, then click OK.</para>
- <para>Wait for few seconds. You can see that the new ACL rule is displayed in the Details
- page.</para>
- </listitem>
- </orderedlist>
- </section>
- <section id="static-route">
- <title>Creating a Static Route</title>
- <para>&PRODUCT; enables you to specify routing for the VPN connection you create. You can enter
- one or CIDR addresses to indicate which traffic is to be routed back to the gateway.</para>
- <orderedlist>
- <listitem>
- <para>In a VPC, identify the Private Gateway you want to work with.</para>
- </listitem>
- <listitem>
- <para>In the Private Gateway page, click the IP address of the Private Gateway you want to
- work with.</para>
- </listitem>
- <listitem>
- <para>Select the Static Routes tab.</para>
- </listitem>
- <listitem>
- <para>Specify the CIDR of destination network.</para>
- </listitem>
- <listitem>
- <para>Click Add.</para>
- <para>Wait for few seconds until the new route is created.</para>
- </listitem>
- </orderedlist>
- </section>
- <section id="blacklist-route">
- <title>Blacklisting Routes</title>
- <para>&PRODUCT; enables you to block a list of routes so that they are not assigned to any of
- the VPC private gateways. Specify the list of routes that you want to blacklist in the
- <code>blacklisted.routes</code> global parameter. Note that the parameter update affects
- only new static route creations. If you block an existing static route, it remains intact and
- continue functioning. You cannot add a static route if the route is blacklisted for the zone.
- </para>
- </section>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-ingress-egress-rules.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-ingress-egress-rules.xml b/docs/en-US/add-ingress-egress-rules.xml
deleted file mode 100644
index 2490cec..0000000
--- a/docs/en-US/add-ingress-egress-rules.xml
+++ /dev/null
@@ -1,131 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-ingress-egress-rules">
- <title>Adding Ingress and Egress Rules to a Security Group</title>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as an administrator or end user. </para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Network</para>
- </listitem>
- <listitem>
- <para>In Select view, choose Security Groups, then click the security group you want .</para>
- </listitem>
- <listitem>
- <para>To add an ingress rule, click the Ingress Rules tab and fill out the following fields to
- specify what network traffic is allowed into VM instances in this security group. If no
- ingress rules are specified, then no traffic will be allowed in, except for responses to any
- traffic that has been allowed out through an egress rule.</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Add by CIDR/Account</emphasis>. Indicate whether the source of
- the traffic will be defined by IP address (CIDR) or an existing security group in a
- &PRODUCT; account (Account). Choose Account if you want to allow incoming traffic from
- all VMs in another security group</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Protocol</emphasis>. The networking protocol that sources will
- use to send traffic to the security group. TCP and UDP are typically used for data
- exchange and end-user communications. ICMP is typically used to send error messages or
- network monitoring data.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Start Port, End Port</emphasis>. (TCP, UDP only) A range of
- listening ports that are the destination for the incoming traffic. If you are opening a
- single port, use the same number in both fields.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">ICMP Type, ICMP Code</emphasis>. (ICMP only) The type of
- message and error code that will be accepted.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">CIDR</emphasis>. (Add by CIDR only) To accept only traffic
- from IP addresses within a particular address block, enter a CIDR or a comma-separated
- list of CIDRs. The CIDR is the base IP address of the incoming traffic. For example,
- 192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Account, Security Group</emphasis>. (Add by Account only) To
- accept only traffic from another security group, enter the &PRODUCT; account and name of
- a security group that has already been defined in that account. To allow traffic between
- VMs within the security group you are editing now, enter the same name you used in step
- 7.</para>
- </listitem>
- </itemizedlist>
- <para>The following example allows inbound HTTP access from anywhere:</para>
- <mediaobject>
- <imageobject>
- <imagedata fileref="./images/http-access.png"/>
- </imageobject>
- <textobject>
- <phrase>httpaccess.png: allows inbound HTTP access from anywhere</phrase>
- </textobject>
- </mediaobject>
- </listitem>
- <listitem>
- <para>To add an egress rule, click the Egress Rules tab and fill out the following fields to
- specify what type of traffic is allowed to be sent out of VM instances in this security
- group. If no egress rules are specified, then all traffic will be allowed out. Once egress
- rules are specified, the following types of traffic are allowed out: traffic specified in
- egress rules; queries to DNS and DHCP servers; and responses to any traffic that has been
- allowed in through an ingress rule</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Add by CIDR/Account</emphasis>. Indicate whether the
- destination of the traffic will be defined by IP address (CIDR) or an existing security
- group in a &PRODUCT; account (Account). Choose Account if you want to allow outgoing
- traffic to all VMs in another security group.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Protocol</emphasis>. The networking protocol that VMs will use
- to send outgoing traffic. TCP and UDP are typically used for data exchange and end-user
- communications. ICMP is typically used to send error messages or network monitoring
- data.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Start Port, End Port</emphasis>. (TCP, UDP only) A range of
- listening ports that are the destination for the outgoing traffic. If you are opening a
- single port, use the same number in both fields.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">ICMP Type, ICMP Code</emphasis>. (ICMP only) The type of
- message and error code that will be sent</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">CIDR</emphasis>. (Add by CIDR only) To send traffic only to IP
- addresses within a particular address block, enter a CIDR or a comma-separated list of
- CIDRs. The CIDR is the base IP address of the destination. For example, 192.168.0.0/22.
- To allow all CIDRs, set to 0.0.0.0/0.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Account, Security Group</emphasis>. (Add by Account only) To
- allow traffic to be sent to another security group, enter the &PRODUCT; account and name
- of a security group that has already been defined in that account. To allow traffic
- between VMs within the security group you are editing now, enter its name.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>Click Add.</para>
- </listitem>
- </orderedlist>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-ip-range.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-ip-range.xml b/docs/en-US/add-ip-range.xml
deleted file mode 100644
index 6da0668..0000000
--- a/docs/en-US/add-ip-range.xml
+++ /dev/null
@@ -1,124 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-ip-range">
- <title>Multiple Subnets in Shared Network</title>
- <para>&PRODUCT; provides you with the flexibility to add guest IP ranges from different subnets in
- Basic zones and security groups-enabled Advanced zones. For security groups-enabled Advanced
- zones, it implies multiple subnets can be added to the same VLAN. With the addition of this
- feature, you will be able to add IP address ranges from the same subnet or from a different one
- when IP address are exhausted. This would in turn allows you to employ higher number of subnets
- and thus reduce the address management overhead. You can delete the IP ranges you have
- added.</para>
- <section id="guidelines-multiplesubnet">
- <title>Prerequisites and Guidelines</title>
- <itemizedlist>
- <listitem>
- <para>This feature can only be implemented:</para>
- <itemizedlist>
- <listitem>
- <para>on IPv4 addresses</para>
- </listitem>
- <listitem>
- <para>if virtual router is the DHCP provider</para>
- </listitem>
- <listitem>
- <para>on KVM, xenServer, and VMware hypervisors</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>Manually configure the gateway of the new subnet before adding the IP range. </para>
- </listitem>
- <listitem>
- <para>&PRODUCT; supports only one gateway for a subnet; overlapping subnets are not
- currently supported</para>
- </listitem>
- </itemizedlist>
- </section>
- <section id="how-to-add-ip">
- <title>Adding Multiple Subnets to a Shared Network</title>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as an administrator or end user.</para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Infrastructure. </para>
- </listitem>
- <listitem>
- <para>On Zones, click View More, then click the zone to which you want to work with..</para>
- </listitem>
- <listitem>
- <para>Click Physical Network.</para>
- </listitem>
- <listitem>
- <para>In the Guest node of the diagram, click Configure.</para>
- </listitem>
- <listitem>
- <para>Click Networks.</para>
- </listitem>
- <listitem>
- <para>Select the networks you want to work with.</para>
- </listitem>
- <listitem>
- <para>Click View IP Ranges.</para>
- </listitem>
- <listitem>
- <para>Click Add IP Range.</para>
- <para>The Add IP Range dialog is displayed, as follows:</para>
- <mediaobject>
- <imageobject>
- <imagedata fileref="./images/add-ip-range.png"/>
- </imageobject>
- <textobject>
- <phrase>add-ip-range.png: adding an IP range to a network.</phrase>
- </textobject>
- </mediaobject>
- </listitem>
- <listitem>
- <para>Specify the following:</para>
- <para>All the fields are mandatory.</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Gateway</emphasis>: The gateway for the tier you create.
- Ensure that the gateway is within the Super CIDR range that you specified while
- creating the VPC, and is not overlapped with the CIDR of any existing tier within the
- VPC.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Netmask</emphasis>: The netmask for the tier you create. </para>
- <para>For example, if the VPC CIDR is 10.0.0.0/16 and the network tier CIDR is
- 10.0.1.0/24, the gateway of the tier is 10.0.1.1, and the netmask of the tier is
- 255.255.255.0.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Start IP/ End IP</emphasis>: A range of IP addresses that
- are accessible from the Internet and will be allocated to guest VMs. Enter the first
- and last IP addresses that define a range that &PRODUCT; can assign to guest VMs
- .</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>Click OK.</para>
- </listitem>
- </orderedlist>
- </section>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-iso.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-iso.xml b/docs/en-US/add-iso.xml
deleted file mode 100644
index 25986e0..0000000
--- a/docs/en-US/add-iso.xml
+++ /dev/null
@@ -1,151 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-iso">
- <title>Adding an ISO</title>
- <para>To make additional operating system or other software available for use with guest VMs, you
- can add an ISO. The ISO is typically thought of as an operating system image, but you can also
- add ISOs for other types of software, such as desktop applications that you want to be installed
- as part of a template.</para>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as an administrator or end user.</para>
- </listitem>
- <listitem>
- <para>In the left navigation bar, click Templates.</para>
- </listitem>
- <listitem>
- <para>In Select View, choose ISOs.</para>
- </listitem>
- <listitem>
- <para>Click Add ISO.</para>
- </listitem>
- <listitem>
- <para>In the Add ISO screen, provide the following:</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Name</emphasis>: Short name for the ISO image. For example,
- CentOS 6.2 64-bit.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Description</emphasis>: Display test for the ISO image. For
- example, CentOS 6.2 64-bit.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">URL</emphasis>: The URL that hosts the ISO image. The
- Management Server must be able to access this location via HTTP. If needed you can place
- the ISO image directly on the Management Server</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Zone</emphasis>: Choose the zone where you want the ISO to be
- available, or All Zones to make it available throughout &PRODUCT;.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Bootable</emphasis>: Whether or not a guest could boot off
- this ISO image. For example, a CentOS ISO is bootable, a Microsoft Office ISO is not
- bootable.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">OS Type</emphasis>: This helps &PRODUCT; and the hypervisor
- perform certain operations and make assumptions that improve the performance of the
- guest. Select one of the following.</para>
- <itemizedlist>
- <listitem>
- <para>If the operating system of your desired ISO image is listed, choose it.</para>
- </listitem>
- <listitem>
- <para>If the OS Type of the ISO is not listed or if the ISO is not bootable, choose
- Other.</para>
- </listitem>
- <listitem>
- <para>(XenServer only) If you want to boot from this ISO in PV mode, choose Other PV
- (32-bit) or Other PV (64-bit)</para>
- </listitem>
- <listitem>
- <para>(KVM only) If you choose an OS that is PV-enabled, the VMs created from this ISO
- will have a SCSI (virtio) root disk. If the OS is not PV-enabled, the VMs will have
- an IDE root disk. The PV-enabled types are:</para>
- <informaltable>
- <tgroup cols="3" align="left" colsep="1" rowsep="1">
- <tbody>
- <row>
- <entry><para>Fedora 13</para></entry>
- <entry><para>Fedora 12</para></entry>
- <entry><para>Fedora 11</para></entry>
- </row>
- <row>
- <entry><para>Fedora 10</para></entry>
- <entry><para>Fedora 9</para></entry>
- <entry><para>Other PV</para></entry>
- </row>
- <row>
- <entry><para>Debian GNU/Linux</para></entry>
- <entry><para>CentOS 5.3</para></entry>
- <entry><para>CentOS 5.4</para></entry>
- </row>
- <row>
- <entry><para>CentOS 5.5</para></entry>
- <entry><para>Red Hat Enterprise Linux 5.3</para></entry>
- <entry><para>Red Hat Enterprise Linux 5.4</para></entry>
- </row>
- <row>
- <entry><para>Red Hat Enterprise Linux 5.5</para></entry>
- <entry><para>Red Hat Enterprise Linux 6</para></entry>
- <entry/>
- </row>
- </tbody>
- </tgroup>
- </informaltable>
- </listitem>
- </itemizedlist>
- <note>
- <para>It is not recommended to choose an older version of the OS than the version in the
- image. For example, choosing CentOS 5.4 to support a CentOS 6.2 image will usually not
- work. In these cases, choose Other.</para>
- </note>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Extractable</emphasis>: Choose Yes if the ISO should be
- available for extraction.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Public</emphasis>: Choose Yes if this ISO should be available
- to other users.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Featured</emphasis>: Choose Yes if you would like this ISO to
- be more prominent for users to select. The ISO will appear in the Featured ISOs list.
- Only an administrator can make an ISO Featured.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>Click OK.</para>
- <para>The Management Server will download the ISO. Depending on the size of the ISO, this may
- take a long time. The ISO status column will display Ready once it has been successfully
- downloaded into secondary storage. Clicking Refresh updates the download percentage.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Important</emphasis>: Wait for the ISO to finish downloading. If
- you move on to the next task and try to use the ISO right away, it will appear to fail. The
- entire ISO must be available before &PRODUCT; can work with it.</para>
- </listitem>
- </orderedlist>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-load-balancer-rule.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-load-balancer-rule.xml b/docs/en-US/add-load-balancer-rule.xml
deleted file mode 100644
index ef3305e..0000000
--- a/docs/en-US/add-load-balancer-rule.xml
+++ /dev/null
@@ -1,102 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-load-balancer-rule">
- <title>Adding a Load Balancer Rule</title>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as an administrator or end user. </para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Network.</para>
- </listitem>
- <listitem>
- <para>Click the name of the network where you want to load balance the traffic.</para>
- </listitem>
- <listitem>
- <para>Click View IP Addresses.</para>
- </listitem>
- <listitem>
- <para>Click the IP address for which you want to create the rule, then click the Configuration
- tab.</para>
- </listitem>
- <listitem>
- <para>In the Load Balancing node of the diagram, click View All.</para>
- <para>In a Basic zone, you can also create a load balancing rule without acquiring or
- selecting an IP address. &PRODUCT; internally assign an IP when you create the load
- balancing rule, which is listed in the IP Addresses page when the rule is created. </para>
- <para>To do that, select the name of the network, then click Add Load Balancer tab. Continue
- with <xref linkend="config-lb"/>.</para>
- </listitem>
- <listitem id="config-lb">
- <para>Fill in the following:</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Name</emphasis>: A name for the load balancer rule.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Public Port</emphasis>: The port receiving incoming traffic to
- be balanced.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Private Port</emphasis>: The port that the VMs will use to
- receive the traffic.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Algorithm</emphasis>: Choose the load balancing algorithm you
- want &PRODUCT; to use. &PRODUCT; supports a variety of well-known algorithms. If you are
- not familiar with these choices, you will find plenty of information about them on the
- Internet.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Stickiness</emphasis>: (Optional) Click Configure and choose
- the algorithm for the stickiness policy. See <xref
- linkend="sticky-session-policies-for-lb-rules"/>.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">AutoScale</emphasis>: Click Configure and complete the
- AutoScale configuration as explained in <xref linkend="autoscale"/>.</para>
- </listitem>
- <listitem><para><emphasis role="bold">Health Check</emphasis>: (Optional; NetScaler load balancers only) Click
- Configure and fill in the characteristics of the health check policy. See <xref
- linkend="health-checks-for-lb-rules"/>.</para>
- <itemizedlist>
- <listitem><para><emphasis role="bold">Ping path (Optional)</emphasis>: Sequence of destinations to which to send health check queries.
- Default: / (all).</para></listitem>
- <listitem><para><emphasis role="bold">Response time (Optional)</emphasis>: How long to wait for a response from the health check (2 - 60 seconds).
- Default: 5 seconds.</para></listitem>
- <listitem><para><emphasis role="bold">Interval time (Optional)</emphasis>: Amount of time between health checks (1 second - 5 minutes).
- Default value is set in the global configuration parameter lbrule_health check_time_interval.</para></listitem>
- <listitem><para><emphasis role="bold">Healthy threshold (Optional)</emphasis>: Number of consecutive health check successes
- that are required before declaring an instance healthy.
- Default: 2.</para></listitem>
- <listitem><para><emphasis role="bold">Unhealthy threshold (Optional)</emphasis>: Number of consecutive health check failures that are required before declaring an instance unhealthy.
- Default: 10.</para></listitem>
- </itemizedlist></listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>Click Add VMs, then select two or more VMs that will divide the load of incoming
- traffic, and click Apply.</para>
- <para>The new load balancer rule appears in the list. You can repeat these steps to add more
- load balancer rules for this IP address.</para>
- </listitem>
- </orderedlist>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-loadbalancer-rule-vpc.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-loadbalancer-rule-vpc.xml b/docs/en-US/add-loadbalancer-rule-vpc.xml
deleted file mode 100644
index 90247b0..0000000
--- a/docs/en-US/add-loadbalancer-rule-vpc.xml
+++ /dev/null
@@ -1,462 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-loadbalancer-rule-vpc">
- <title>Adding Load Balancing Rules on a VPC</title>
- <para>In a VPC, you can configure two types of load balancing—external LB and internal LB.
- External LB is nothing but a LB rule created to redirect the traffic received at a public IP of
- the VPC virtual router. The traffic is load balanced within a tier based on your configuration.
- Citrix NetScaler and VPC virtual router are supported for external LB. When you use internal LB
- service, traffic received at a tier is load balanced across different VMs within that tier. For
- example, traffic reached at Web tier is redirected to another VM in that tier. External load
- balancing devices are not supported for internal LB. The service is provided by a internal LB VM
- configured on the target tier.</para>
- <section id="curent-lb-vpc">
- <title>Load Balancing Within a Tier (External LB)</title>
- <para>A &PRODUCT; user or administrator may create load balancing rules that balance traffic
- received at a public IP to one or more VMs that belong to a network tier that provides load
- balancing service in a VPC. A user creates a rule, specifies an algorithm, and assigns the
- rule to a set of VMs within a tier.</para>
- <section id="enable-vpc-public-lb">
- <title>Enabling NetScaler as the LB Provider on a VPC Tier</title>
- <orderedlist>
- <listitem>
- <para>Add and enable Netscaler VPX in dedicated mode.</para>
- <para>Netscaler can be used in a VPC environment only if it is in dedicated mode.</para>
- </listitem>
- <listitem>
- <para>Create a network offering, as given in <xref linkend="ext-lb-offering"/>.</para>
- </listitem>
- <listitem>
- <para>Create a VPC with Netscaler as the Public LB provider.</para>
- <para>For more information, see <xref linkend="add-vpc"/>.</para>
- </listitem>
- <listitem>
- <para>For the VPC, acquire an IP.</para>
- </listitem>
- <listitem>
- <para>Create an external load balancing rule and apply, as given in <xref
- linkend="ext-lb-vpc"/>.</para>
- </listitem>
- </orderedlist>
- </section>
- <section id="ext-lb-offering">
- <title>Creating a Network Offering for External LB</title>
- <para>To have external LB support on VPC, create a network offering as follows: </para>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as a user or admin.</para>
- </listitem>
- <listitem>
- <para>From the Select Offering drop-down, choose Network Offering.</para>
- </listitem>
- <listitem>
- <para>Click Add Network Offering.</para>
- </listitem>
- <listitem>
- <para>In the dialog, make the following choices:</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Name</emphasis>: Any desired name for the network
- offering.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Description</emphasis>: A short description of the
- offering that can be displayed to users.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Network Rate</emphasis>: Allowed data transfer rate in MB
- per second.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Traffic Type</emphasis>: The type of network traffic that
- will be carried on the network.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Guest Type</emphasis>: Choose whether the guest network is
- isolated or shared.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Persistent</emphasis>: Indicate whether the guest network
- is persistent or not. The network that you can provision without having to deploy a
- VM on it is termed persistent network. </para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">VPC</emphasis>: This option indicate whether the guest
- network is Virtual Private Cloud-enabled. A Virtual Private Cloud (VPC) is a
- private, isolated part of &PRODUCT;. A VPC can have its own virtual network topology
- that resembles a traditional physical network. For more information on VPCs, see
- <xref linkend="vpc"/>.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Specify VLAN</emphasis>: (Isolated guest networks only)
- Indicate whether a VLAN should be specified when this offering is used.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Supported Services</emphasis>: Select Load Balancer. Use
- Netscaler or VpcVirtualRouter.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Load Balancer Type</emphasis>: Select Public LB from the
- drop-down.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">LB Isolation</emphasis>: Select Dedicated if Netscaler is
- used as the external LB provider.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">System Offering</emphasis>: Choose the system service
- offering that you want virtual routers to use in this network.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Conserve mode</emphasis>: Indicate whether to use conserve
- mode. In this mode, network resources are allocated only when the first virtual
- machine starts in the network.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>Click OK and the network offering is created.</para>
- </listitem>
- </orderedlist>
- </section>
- <section id="ext-lb-vpc">
- <title>Creating an External LB Rule</title>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as an administrator or end user.</para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Network.</para>
- </listitem>
- <listitem>
- <para>In the Select view, select VPC.</para>
- <para>All the VPCs that you have created for the account is listed in the page.</para>
- </listitem>
- <listitem>
- <para>Click the Configure button of the VPC, for which you want to configure load
- balancing rules.</para>
- <para>The VPC page is displayed where all the tiers you created listed in a
- diagram.</para>
- <para>For each tier, the following options are displayed:</para>
- <itemizedlist>
- <listitem>
- <para>Internal LB</para>
- </listitem>
- <listitem>
- <para>Public LB IP</para>
- </listitem>
- <listitem>
- <para>Static NAT</para>
- </listitem>
- <listitem>
- <para>Virtual Machines</para>
- </listitem>
- <listitem>
- <para>CIDR</para>
- </listitem>
- </itemizedlist>
- <para>The following router information is displayed:</para>
- <itemizedlist>
- <listitem>
- <para>Private Gateways</para>
- </listitem>
- <listitem>
- <para>Public IP Addresses</para>
- </listitem>
- <listitem>
- <para>Site-to-Site VPNs</para>
- </listitem>
- <listitem>
- <para>Network ACL Lists</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>In the Router node, select Public IP Addresses.</para>
- <para>The IP Addresses page is displayed.</para>
- </listitem>
- <listitem>
- <para>Click the IP address for which you want to create the rule, then click the
- Configuration tab.</para>
- </listitem>
- <listitem>
- <para>In the Load Balancing node of the diagram, click View All.</para>
- </listitem>
- <listitem>
- <para>Select the tier to which you want to apply the rule.</para>
- </listitem>
- <listitem>
- <para>Specify the following:</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Name</emphasis>: A name for the load balancer rule.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Public Port</emphasis>: The port that receives the
- incoming traffic to be balanced.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Private Port</emphasis>: The port that the VMs will use to
- receive the traffic.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Algorithm</emphasis>. Choose the load balancing algorithm
- you want &PRODUCT; to use. &PRODUCT; supports the following well-known
- algorithms:</para>
- <itemizedlist>
- <listitem>
- <para>Round-robin</para>
- </listitem>
- <listitem>
- <para>Least connections</para>
- </listitem>
- <listitem>
- <para>Source</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Stickiness</emphasis>. (Optional) Click Configure and
- choose the algorithm for the stickiness policy. See Sticky Session Policies for Load
- Balancer Rules.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Add VMs</emphasis>: Click Add VMs, then select two or more
- VMs that will divide the load of incoming traffic, and click Apply.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- </orderedlist>
- <para>The new load balancing rule appears in the list. You can repeat these steps to add more
- load balancing rules for this IP address.</para>
- </section>
- </section>
- <section id="acros-tiers-lb">
- <title>Load Balancing Across Tiers</title>
- <para>&PRODUCT; supports sharing workload across different tiers within your VPC. Assume that
- multiple tiers are set up in your environment, such as Web tier and Application tier. Traffic
- to each tier is balanced on the VPC virtual router on the public side, as explained in <xref
- linkend="add-loadbalancer-rule-vpc"/>. If you want the traffic coming from the Web tier to
- the Application tier to be balanced, use the internal load balancing feature offered by
- &PRODUCT;.</para>
- <section id="vpc-pic">
- <title>How Does Internal LB Work in VPC?</title>
- <para>In this figure, a public LB rule is created for the public IP 72.52.125.10 with public
- port 80 and private port 81. The LB rule, created on the VPC virtual router, is applied on
- the traffic coming from the Internet to the VMs on the Web tier. On the Application tier two
- internal load balancing rules are created. An internal LB rule for the guest IP 10.10.10.4
- with load balancer port 23 and instance port 25 is configured on the VM, InternalLBVM1.
- Another internal LB rule for the guest IP 10.10.10.4 with load balancer port 45 and instance
- port 46 is configured on the VM, InternalLBVM1. Another internal LB rule for the guest IP
- 10.10.10.6, with load balancer port 23 and instance port 25 is configured on the VM,
- InternalLBVM2.</para>
- <mediaobject>
- <imageobject>
- <imagedata fileref="./images/vpc-lb.png"/>
- </imageobject>
- <textobject>
- <phrase>vpc-lb.png: Configuring internal LB for VPC</phrase>
- </textobject>
- </mediaobject>
- </section>
- <section id="internallb-notes">
- <title>Guidelines</title>
- <itemizedlist>
- <listitem><para>Internal LB and Public LB are mutually exclusive on a tier. If the tier has LB on the public
- side, then it can't have the Internal LB.</para></listitem>
- <listitem><para>Internal LB is supported just on VPC networks in &PRODUCT; 4.2 release.</para></listitem>
- <listitem><para>Only Internal LB VM can act as the Internal LB provider in &PRODUCT; 4.2 release.</para></listitem>
- <listitem><para>Network upgrade is not supported from the network offering with Internal LB to the network
- offering with Public LB.</para></listitem>
- <listitem><para>Multiple tiers can have internal LB support in a VPC.</para></listitem>
- <listitem><para>Only one tier can have Public LB support in a VPC.</para></listitem>
- </itemizedlist>
- </section>
- <section id="enable-vpc-lb">
- <title>Enabling Internal LB on a VPC Tier</title>
- <orderedlist>
- <listitem>
- <para>Create a network offering, as given in <xref linkend="int-lb-vpc"/>.</para>
- </listitem>
- <listitem>
- <para>Create an internal load balancing rule and apply, as given in <xref
- linkend="int-lb-vpc"/>.</para>
- </listitem>
- </orderedlist>
- </section>
- <section id="int-lb-offering">
- <title>Creating a Network Offering for Internal LB</title>
- <para>To have internal LB support on VPC, either use the default offering,
- DefaultIsolatedNetworkOfferingForVpcNetworksWithInternalLB, or create a network offering as
- follows: </para>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as a user or admin.</para>
- </listitem>
- <listitem>
- <para>From the Select Offering drop-down, choose Network Offering.</para>
- </listitem>
- <listitem>
- <para>Click Add Network Offering.</para>
- </listitem>
- <listitem>
- <para>In the dialog, make the following choices:</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Name</emphasis>: Any desired name for the network
- offering.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Description</emphasis>: A short description of the
- offering that can be displayed to users.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Network Rate</emphasis>: Allowed data transfer rate in MB
- per second.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Traffic Type</emphasis>: The type of network traffic that
- will be carried on the network.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Guest Type</emphasis>: Choose whether the guest network is
- isolated or shared.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Persistent</emphasis>: Indicate whether the guest network
- is persistent or not. The network that you can provision without having to deploy a
- VM on it is termed persistent network. </para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">VPC</emphasis>: This option indicate whether the guest
- network is Virtual Private Cloud-enabled. A Virtual Private Cloud (VPC) is a
- private, isolated part of &PRODUCT;. A VPC can have its own virtual network topology
- that resembles a traditional physical network. For more information on VPCs, see
- <xref linkend="vpc"/>.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Specify VLAN</emphasis>: (Isolated guest networks only)
- Indicate whether a VLAN should be specified when this offering is used.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Supported Services</emphasis>: Select Load Balancer.
- Select <code>InternalLbVM</code> from the provider list.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Load Balancer Type</emphasis>: Select Internal LB from the
- drop-down.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">System Offering</emphasis>: Choose the system service
- offering that you want virtual routers to use in this network.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Conserve mode</emphasis>: Indicate whether to use conserve
- mode. In this mode, network resources are allocated only when the first virtual
- machine starts in the network.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>Click OK and the network offering is created.</para>
- </listitem>
- </orderedlist>
- </section>
- <section id="int-lb-vpc">
- <title>Creating an Internal LB Rule</title>
- <para>When you create the Internal LB rule and applies to a VM, an Internal LB VM, which is
- responsible for load balancing, is created. </para>
- <para>You can view the created Internal LB VM in the Instances page if you navigate to
- <emphasis role="bold">Infrastructure</emphasis> > <emphasis role="bold">Zones</emphasis> >
- <<emphasis role="italic">zone_ name</emphasis>> > <<emphasis role="italic"
- >physical_network_name</emphasis>> > <emphasis role="bold">Network Service
- Providers</emphasis> > <emphasis role="bold">Internal LB VM</emphasis>. You can manage the
- Internal LB VMs as and when required from the location.</para>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as an administrator or end user.</para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Network.</para>
- </listitem>
- <listitem>
- <para>In the Select view, select VPC.</para>
- <para>All the VPCs that you have created for the account is listed in the page.</para>
- </listitem>
- <listitem>
- <para>Locate the VPC for which you want to configure internal LB, then click
- Configure.</para>
- <para>The VPC page is displayed where all the tiers you created listed in a
- diagram.</para>
- </listitem>
- <listitem>
- <para>Locate the Tier for which you want to configure an internal LB rule, click Internal
- LB.</para>
- <para>In the Internal LB page, click Add Internal LB.</para>
- </listitem>
- <listitem>
- <para>In the dialog, specify the following:</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Name</emphasis>: A name for the load balancer rule.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Description</emphasis>: A short description of the rule
- that can be displayed to users.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Source IP Address</emphasis>: (Optional) The source IP
- from which traffic originates. The IP is acquired from the CIDR of that particular
- tier on which you want to create the Internal LB rule. If not specified, the IP
- address is automatically allocated from the network CIDR.</para>
- <para>For every Source IP, a new Internal LB VM is created for load balancing.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Source Port</emphasis>: The port associated with the
- source IP. Traffic on this port is load balanced. </para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Instance Port</emphasis>: The port of the internal LB
- VM.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Algorithm</emphasis>. Choose the load balancing algorithm
- you want &PRODUCT; to use. &PRODUCT; supports the following well-known
- algorithms:</para>
- <itemizedlist>
- <listitem>
- <para>Round-robin</para>
- </listitem>
- <listitem>
- <para>Least connections</para>
- </listitem>
- <listitem>
- <para>Source</para>
- </listitem>
- </itemizedlist>
- </listitem>
- </itemizedlist>
- </listitem>
- </orderedlist>
- </section>
- </section>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-members-to-projects.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-members-to-projects.xml b/docs/en-US/add-members-to-projects.xml
deleted file mode 100644
index 39c3edf..0000000
--- a/docs/en-US/add-members-to-projects.xml
+++ /dev/null
@@ -1,35 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-<section id="add-members-to-projects">
- <title>Adding Members to a Project</title>
- <para>New members can be added to a project by the project’s administrator, the domain administrator of the domain where the project resides or any parent domain, or the &PRODUCT; root administrator. There are two ways to add members in &PRODUCT;, but only one way is enabled at a time:</para>
- <itemizedlist>
- <listitem><para>If invitations have been enabled, you can send invitations to new members.</para></listitem>
- <listitem><para>If invitations are not enabled, you can add members directly through the UI.</para></listitem>
- </itemizedlist>
- <xi:include href="send-projects-membership-invitation.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="add-projects-members-from-ui.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- </section>
-
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-more-clusters.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-more-clusters.xml b/docs/en-US/add-more-clusters.xml
deleted file mode 100644
index 894b4d8..0000000
--- a/docs/en-US/add-more-clusters.xml
+++ /dev/null
@@ -1,29 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-more-clusters">
- <title>Add More Clusters (Optional)</title>
- <para>You need to tell &PRODUCT; about the hosts that it will manage. Hosts exist inside clusters,
- so before you begin adding hosts to the cloud, you must add at least one cluster.</para>
- <xi:include href="about-clusters.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
- <xi:include href="add-clusters-kvm-xenserver.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
- <!-- <xi:include href="add-clusters-ovm.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/> -->
- <xi:include href="add-clusters-vsphere.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-password-management-to-templates.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-password-management-to-templates.xml b/docs/en-US/add-password-management-to-templates.xml
deleted file mode 100644
index 60de951..0000000
--- a/docs/en-US/add-password-management-to-templates.xml
+++ /dev/null
@@ -1,42 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-password-management-to-templates">
- <title>Adding Password Management to Your Templates</title>
- <para>&PRODUCT; provides an optional password reset feature that allows users to set a temporary
- admin or root password as well as reset the existing admin or root password from the &PRODUCT;
- UI.</para>
- <para>To enable the Reset Password feature, you will need to download an additional script to
- patch your template. When you later upload the template into &PRODUCT;, you can specify whether
- reset admin/root password feature should be enabled for this template.</para>
- <para>The password management feature works always resets the account password on instance boot.
- The script does an HTTP call to the virtual router to retrieve the account password that should
- be set. As long as the virtual router is accessible the guest will have access to the account
- password that should be used. When the user requests a password reset the management server
- generates and sends a new password to the virtual router for the account. Thus an instance
- reboot is necessary to effect any password changes.</para>
- <para>If the script is unable to contact the virtual router during instance boot it will not set
- the password but boot will continue normally.</para>
- <xi:include href="linux-installation.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
- <xi:include href="windows-installation.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-portforward-rule-vpc.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-portforward-rule-vpc.xml b/docs/en-US/add-portforward-rule-vpc.xml
deleted file mode 100644
index 5b1bb49..0000000
--- a/docs/en-US/add-portforward-rule-vpc.xml
+++ /dev/null
@@ -1,117 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-portforward-vpc">
- <title>Adding a Port Forwarding Rule on a VPC</title>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI as an administrator or end user.</para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Network.</para>
- </listitem>
- <listitem>
- <para>In the Select view, select VPC.</para>
- <para>All the VPCs that you have created for the account is listed in the page.</para>
- </listitem>
- <listitem>
- <para>Click the Configure button of the VPC to which you want to deploy the VMs.</para>
- <para>The VPC page is displayed where all the tiers you created are listed in a
- diagram.</para>
- <para>For each tier, the following options are displayed:</para>
- <itemizedlist>
- <listitem>
- <para>Internal LB</para>
- </listitem>
- <listitem>
- <para>Public LB IP</para>
- </listitem>
- <listitem>
- <para>Static NAT</para>
- </listitem>
- <listitem>
- <para>Virtual Machines</para>
- </listitem>
- <listitem>
- <para>CIDR</para>
- </listitem>
- </itemizedlist>
- <para>The following router information is displayed:</para>
- <itemizedlist>
- <listitem>
- <para>Private Gateways</para>
- </listitem>
- <listitem>
- <para>Public IP Addresses</para>
- </listitem>
- <listitem>
- <para>Site-to-Site VPNs</para>
- </listitem>
- <listitem>
- <para>Network ACL Lists</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para>In the Router node, select Public IP Addresses.</para>
- <para>The IP Addresses page is displayed.</para>
- </listitem>
- <listitem>
- <para>Click the IP address for which you want to create the rule, then click the Configuration
- tab.</para>
- </listitem>
- <listitem>
- <para>In the Port Forwarding node of the diagram, click View All.</para>
- </listitem>
- <listitem>
- <para>Select the tier to which you want to apply the rule.</para>
- </listitem>
- <listitem>
- <para>Specify the following:</para>
- <itemizedlist>
- <listitem>
- <para><emphasis role="bold">Public Port</emphasis>: The port to which public traffic will
- be addressed on the IP address you acquired in the previous step.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Private Port</emphasis>: The port on which the instance is
- listening for forwarded public traffic.</para>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Protocol</emphasis>: The communication protocol in use between
- the two ports.</para>
- <itemizedlist>
- <listitem>
- <para>TCP</para>
- </listitem>
- <listitem>
- <para>UDP</para>
- </listitem>
- </itemizedlist>
- </listitem>
- <listitem>
- <para><emphasis role="bold">Add VM</emphasis>: Click Add VM. Select the name of the
- instance to which this rule applies, and click Apply.</para>
- <para>You can test the rule by opening an SSH session to the instance.</para>
- </listitem>
- </itemizedlist>
- </listitem>
- </orderedlist>
-</section>
http://git-wip-us.apache.org/repos/asf/cloudstack/blob/5586a221/docs/en-US/add-primary-storage.xml
----------------------------------------------------------------------
diff --git a/docs/en-US/add-primary-storage.xml b/docs/en-US/add-primary-storage.xml
deleted file mode 100644
index a43567f..0000000
--- a/docs/en-US/add-primary-storage.xml
+++ /dev/null
@@ -1,108 +0,0 @@
-<?xml version='1.0' encoding='utf-8' ?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-<!ENTITY % BOOK_ENTITIES SYSTEM "cloudstack.ent">
-%BOOK_ENTITIES;
-]>
-<!-- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-<section id="add-primary-storage">
- <title>Adding Primary Storage</title>
- <note>
- <para>Ensure that nothing stored on the server. Adding the server to CloudStack will destroy any
- existing data.</para>
- </note>
- <para>When you create a new zone, the first primary storage is added as part of that procedure.
- You can add primary storage servers at any time, such as when adding a new cluster or adding
- more servers to an existing cluster.</para>
- <orderedlist>
- <listitem>
- <para>Log in to the &PRODUCT; UI.</para>
- </listitem>
- <listitem>
- <para>In the left navigation, choose Infrastructure. In Zones, click View More, then click the
- zone in which you want to add the primary storage.</para>
- </listitem>
- <listitem>
- <para>Click the Compute tab.</para>
- </listitem>
- <listitem>
- <para>In the Primary Storage node of the diagram, click View All.</para>
- </listitem>
- <listitem>
- <para>Click Add Primary Storage.</para>
- </listitem>
- <listitem>
- <para>Provide the following information in the dialog. The information required varies
- depending on your choice in Protocol.</para>
- <itemizedlist>
- <listitem>
- <para>Pod. The pod for the storage device.</para>
- </listitem>
- <listitem>
- <para>Cluster. The cluster for the storage device.</para>
- </listitem>
- <listitem>
- <para>Name. The name of the storage device</para>
- </listitem>
- <listitem>
- <para>Protocol. For XenServer, choose either NFS, iSCSI, or PreSetup. For KVM, choose NFS
- or SharedMountPoint. For vSphere choose either VMFS (iSCSI or FiberChannel) or
- NFS</para>
- </listitem>
- <listitem>
- <para>Server (for NFS, iSCSI, or PreSetup). The IP address or DNS name of the storage
- device</para>
- </listitem>
- <listitem>
- <para>Server (for VMFS). The IP address or DNS name of the vCenter server.</para>
- </listitem>
- <listitem>
- <para>Path (for NFS). In NFS this is the exported path from the server.</para>
- </listitem>
- <listitem>
- <para>Path (for VMFS). In vSphere this is a combination of the datacenter name and the
- datastore name. The format is "/" datacenter name "/" datastore name. For example,
- "/cloud.dc.VM/cluster1datastore".</para>
- </listitem>
- <listitem>
- <para>Path (for SharedMountPoint). With KVM this is the path on each host that is where
- this primary storage is mounted. For example, "/mnt/primary".</para>
- </listitem>
- <listitem>
- <para>SR Name-Label (for PreSetup). Enter the name-label of the SR that has been set up
- outside &PRODUCT;.</para>
- </listitem>
- <listitem>
- <para>Target IQN (for iSCSI). In iSCSI this is the IQN of the target. For example,
- iqn.1986-03.com.sun:02:01ec9bb549-1271378984</para>
- </listitem>
- <listitem>
- <para>Lun # (for iSCSI). In iSCSI this is the LUN number. For example, 3.</para>
- </listitem>
- <listitem>
- <para>Tags (optional). The comma-separated list of tags for this storage device. It should
- be an equivalent set or superset of the tags on your disk offerings.</para>
- </listitem>
- </itemizedlist>
- <para>The tag sets on primary storage across clusters in a Zone must be identical. For
- example, if cluster A provides primary storage that has tags T1 and T2, all other clusters
- in the Zone must also provide primary storage that has tags T1 and T2.</para>
- </listitem>
- <listitem>
- <para>Click OK.</para>
- </listitem>
- </orderedlist>
-</section>