You are viewing a plain text version of this content. The canonical link for it is here.

Posted to dev@hawq.apache.org by Radar Lei <rl...@pivotal.io> on 2017/12/01 02:08:43 UTC

Re: Travis CI failing for Hawq

Hi Shubham,

Thanks for help addressing this issue. I think you can just go ahead and
fix it.

For the question why master is still green, I think there is no PR was
merged to master in the passed, so only PRs were tested by Travis.

Regards,
Radar

On Fri, Dec 1, 2017 at 3:04 AM, Shubham Sharma <ss...@pivotal.io> wrote:

> Hello folks,
>
> It looks like our Travis build is broken. I first noticed this for my own
> fork's build and saw the same behavior in apache github repo as well. It is
> failing with the error below
>
> configure: error: Please install apr from http://apr.apache.org/ and
> add dir of 'apr-1-config' to env variable
> '/Users/travis/.rvm/gems/ruby-2.4.2/bin:/Users/travis/.rvm/
> gems/ruby-2.4.2@global/bin:/Users/travis/.rvm/rubies/ruby-
> 2.4.2/bin:/Users/travis/.rvm/bin:/Users/travis/bin:/Users/
> travis/.local/bin:/Users/travis/.nvm/versions/node/v6.
> 11.4/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin'.
>
> The command "./configure" failed and exited with 1 during .
>
> Your build has been stopped.
>
> /Users/travis/.travis/job_stages: line 166: shell_session_update:
> command not found
>
> Looked into it, the builds started failing November 28th. This is around
> the same time when Travis CI upgraded their default xcode version to 8.3.
> Here
> is the notification
> <https://blog.travis-ci.com/2017-11-21-xcode8-3-default-image-announce> .
>
> Have identified a potential fix and tested it for my fork, the build
> completes successfully. Currently we don't install apr using brew install,
> which is one of the pre-requisites as mentioned in the hawq incubator wiki.
> The fix is to "brew install apr" and then force link it to the path using
> "brew link apr --force. This resolves the problem.
>
> But I have couple of additional questions -
>
> 1. How did the apr get installed before, was it installed with some other
> package. Asking this as few packages have been removed from the default
> image in xcode 8.3
>
> 2. Though the build for branches is failing continuously, why the build
> status for master is still green ?
>
> Anyhow, since apr is a dependency for our project my proposal is to add a
> brew install to travis.yml to avoid failure due to such upgrade in future.
>
> Let me know your thoughts, I can create a JIRA and already have a PR ready.
>
> --
> Regards,
> Shubham
>

回复：Travis CI failing for Hawq

Posted by "刘奎恩(局外)" <ku...@alibaba-inc.com>.

Thanks Shubham.
If necessary, anyway to re-trigger my submissions to pass the Travis CI? 
Two of them are submitted 2 days ago:https://github.com/apache/incubator-hawq/pull/1315https://github.com/apache/incubator-hawq/pull/1316
One is updated yesterday:
https://github.com/apache/incubator-hawq/pull/1292



-------------——
Kuien Liu/奎恩
------------------------------------------------------------------发件人：Radar Lei <rl...@pivotal.io>发送时间：2017年12月1日(星期五) 10:32收件人：dev <de...@hawq.incubator.apache.org>主　题：Re: Travis CI failing for Hawq
Thanks you Shubham.

The fix is merged to master.

Regards,
Radar

On Fri, Dec 1, 2017 at 10:27 AM, Shubham Sharma <ss...@pivotal.io> wrote:

> Travis CI build is green again.
> 
>
> On Thu, Nov 30, 2017 at 6:12 PM, Shubham Sharma <ss...@pivotal.io>
> wrote:
>
> > Thanks Radar, already submitted a PR https://github.com/apache/
> > incubator-hawq/pull/1317 . The build is in progress and passed the
> > failure stage. Hopefully build should complete in another 10 minutes.
> >
> > On Thu, Nov 30, 2017 at 6:08 PM, Radar Lei <rl...@pivotal.io> wrote:
> >
> >> Hi Shubham,
> >>
> >> Thanks for help addressing this issue. I think you can just go ahead and
> >> fix it.
> >>
> >> For the question why master is still green, I think there is no PR was
> >> merged to master in the passed, so only PRs were tested by Travis.
> >>
> >> Regards,
> >> Radar
> >>
> >> On Fri, Dec 1, 2017 at 3:04 AM, Shubham Sharma <ss...@pivotal.io>
> >> wrote:
> >>
> >> > Hello folks,
> >> >
> >> > It looks like our Travis build is broken. I first noticed this for my
> >> own
> >> > fork's build and saw the same behavior in apache github repo as well.
> >> It is
> >> > failing with the error below
> >> >
> >> > configure: error: Please install apr from http://apr.apache.org/ and
> >> > add dir of 'apr-1-config' to env variable
> >> > '/Users/travis/.rvm/gems/ruby-2.4.2/bin:/Users/travis/.rvm/
> >> > gems/ruby-2.4.2@global/bin:/Users/travis/.rvm/rubies/ruby-
> >> > 2.4.2/bin:/Users/travis/.rvm/bin:/Users/travis/bin:/Users/
> >> > travis/.local/bin:/Users/travis/.nvm/versions/node/v6.
> >> > 11.4/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin'.
> >> >
> >> > The command "./configure" failed and exited with 1 during .
> >> >
> >> > Your build has been stopped.
> >> >
> >> > /Users/travis/.travis/job_stages: line 166: shell_session_update:
> >> > command not found
> >> >
> >> > Looked into it, the builds started failing November 28th. This is
> around
> >> > the same time when Travis CI upgraded their default xcode version to
> >> 8.3.
> >> > Here
> >> > is the notification
> >> > <https://blog.travis-ci.com/2017-11-21-xcode8-3-default-
> image-announce>
> >> .
> >> >
> >> > Have identified a potential fix and tested it for my fork, the build
> >> > completes successfully. Currently we don't install apr using brew
> >> install,
> >> > which is one of the pre-requisites as mentioned in the hawq incubator
> >> wiki.
> >> > The fix is to "brew install apr" and then force link it to the path
> >> using
> >> > "brew link apr --force. This resolves the problem.
> >> >
> >> > But I have couple of additional questions -
> >> >
> >> > 1. How did the apr get installed before, was it installed with some
> >> other
> >> > package. Asking this as few packages have been removed from the
> default
> >> > image in xcode 8.3
> >> >
> >> > 2. Though the build for branches is failing continuously, why the
> build
> >> > status for master is still green ?
> >> >
> >> > Anyhow, since apr is a dependency for our project my proposal is to
> add
> >> a
> >> > brew install to travis.yml to avoid failure due to such upgrade in
> >> future.
> >> >
> >> > Let me know your thoughts, I can create a JIRA and already have a PR
> >> ready.
> >> >
> >> > --
> >> > Regards,
> >> > Shubham
> >> >
> >>
> >
> >
> >
> > --
> > Regards,
> > Shubham Sharma
> > Staff Customer Engineer
> > Pivotal Global Support Services
> > ssharma@pivotal.io
> > Direct Tel: +1(510)-304-8201 <(510)%20304-8201>
> > Office Hours: Mon-Fri 9:00 am to 5:00 pm PDT
> > Out of Office Hours Contact +1 877-477-2269 <(877)%20477-2269>
> >
>
>
>
> --
> Regards,
> Shubham Sharma
> Staff Customer Engineer
> Pivotal Global Support Services
> ssharma@pivotal.io
> Direct Tel: +1(510)-304-8201
> Office Hours: Mon-Fri 9:00 am to 5:00 pm PDT
> Out of Office Hours Contact +1 877-477-2269
>

Re: Travis CI failing for Hawq

Posted by Radar Lei <rl...@pivotal.io>.

Thanks you Shubham.

The fix is merged to master.

Regards,
Radar

On Fri, Dec 1, 2017 at 10:27 AM, Shubham Sharma <ss...@pivotal.io> wrote:

> Travis CI build is green again.
> 
>
> On Thu, Nov 30, 2017 at 6:12 PM, Shubham Sharma <ss...@pivotal.io>
> wrote:
>
> > Thanks Radar, already submitted a PR https://github.com/apache/
> > incubator-hawq/pull/1317 . The build is in progress and passed the
> > failure stage. Hopefully build should complete in another 10 minutes.
> >
> > On Thu, Nov 30, 2017 at 6:08 PM, Radar Lei <rl...@pivotal.io> wrote:
> >
> >> Hi Shubham,
> >>
> >> Thanks for help addressing this issue. I think you can just go ahead and
> >> fix it.
> >>
> >> For the question why master is still green, I think there is no PR was
> >> merged to master in the passed, so only PRs were tested by Travis.
> >>
> >> Regards,
> >> Radar
> >>
> >> On Fri, Dec 1, 2017 at 3:04 AM, Shubham Sharma <ss...@pivotal.io>
> >> wrote:
> >>
> >> > Hello folks,
> >> >
> >> > It looks like our Travis build is broken. I first noticed this for my
> >> own
> >> > fork's build and saw the same behavior in apache github repo as well.
> >> It is
> >> > failing with the error below
> >> >
> >> > configure: error: Please install apr from http://apr.apache.org/ and
> >> > add dir of 'apr-1-config' to env variable
> >> > '/Users/travis/.rvm/gems/ruby-2.4.2/bin:/Users/travis/.rvm/
> >> > gems/ruby-2.4.2@global/bin:/Users/travis/.rvm/rubies/ruby-
> >> > 2.4.2/bin:/Users/travis/.rvm/bin:/Users/travis/bin:/Users/
> >> > travis/.local/bin:/Users/travis/.nvm/versions/node/v6.
> >> > 11.4/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin'.
> >> >
> >> > The command "./configure" failed and exited with 1 during .
> >> >
> >> > Your build has been stopped.
> >> >
> >> > /Users/travis/.travis/job_stages: line 166: shell_session_update:
> >> > command not found
> >> >
> >> > Looked into it, the builds started failing November 28th. This is
> around
> >> > the same time when Travis CI upgraded their default xcode version to
> >> 8.3.
> >> > Here
> >> > is the notification
> >> > <https://blog.travis-ci.com/2017-11-21-xcode8-3-default-
> image-announce>
> >> .
> >> >
> >> > Have identified a potential fix and tested it for my fork, the build
> >> > completes successfully. Currently we don't install apr using brew
> >> install,
> >> > which is one of the pre-requisites as mentioned in the hawq incubator
> >> wiki.
> >> > The fix is to "brew install apr" and then force link it to the path
> >> using
> >> > "brew link apr --force. This resolves the problem.
> >> >
> >> > But I have couple of additional questions -
> >> >
> >> > 1. How did the apr get installed before, was it installed with some
> >> other
> >> > package. Asking this as few packages have been removed from the
> default
> >> > image in xcode 8.3
> >> >
> >> > 2. Though the build for branches is failing continuously, why the
> build
> >> > status for master is still green ?
> >> >
> >> > Anyhow, since apr is a dependency for our project my proposal is to
> add
> >> a
> >> > brew install to travis.yml to avoid failure due to such upgrade in
> >> future.
> >> >
> >> > Let me know your thoughts, I can create a JIRA and already have a PR
> >> ready.
> >> >
> >> > --
> >> > Regards,
> >> > Shubham
> >> >
> >>
> >
> >
> >
> > --
> > Regards,
> > Shubham Sharma
> > Staff Customer Engineer
> > Pivotal Global Support Services
> > ssharma@pivotal.io
> > Direct Tel: +1(510)-304-8201 <(510)%20304-8201>
> > Office Hours: Mon-Fri 9:00 am to 5:00 pm PDT
> > Out of Office Hours Contact +1 877-477-2269 <(877)%20477-2269>
> >
>
>
>
> --
> Regards,
> Shubham Sharma
> Staff Customer Engineer
> Pivotal Global Support Services
> ssharma@pivotal.io
> Direct Tel: +1(510)-304-8201
> Office Hours: Mon-Fri 9:00 am to 5:00 pm PDT
> Out of Office Hours Contact +1 877-477-2269
>

Re: Travis CI failing for Hawq

Posted by Shubham Sharma <ss...@pivotal.io>.

Travis CI build is green again.


On Thu, Nov 30, 2017 at 6:12 PM, Shubham Sharma <ss...@pivotal.io> wrote:

> Thanks Radar, already submitted a PR https://github.com/apache/
> incubator-hawq/pull/1317 . The build is in progress and passed the
> failure stage. Hopefully build should complete in another 10 minutes.
>
> On Thu, Nov 30, 2017 at 6:08 PM, Radar Lei <rl...@pivotal.io> wrote:
>
>> Hi Shubham,
>>
>> Thanks for help addressing this issue. I think you can just go ahead and
>> fix it.
>>
>> For the question why master is still green, I think there is no PR was
>> merged to master in the passed, so only PRs were tested by Travis.
>>
>> Regards,
>> Radar
>>
>> On Fri, Dec 1, 2017 at 3:04 AM, Shubham Sharma <ss...@pivotal.io>
>> wrote:
>>
>> > Hello folks,
>> >
>> > It looks like our Travis build is broken. I first noticed this for my
>> own
>> > fork's build and saw the same behavior in apache github repo as well.
>> It is
>> > failing with the error below
>> >
>> > configure: error: Please install apr from http://apr.apache.org/ and
>> > add dir of 'apr-1-config' to env variable
>> > '/Users/travis/.rvm/gems/ruby-2.4.2/bin:/Users/travis/.rvm/
>> > gems/ruby-2.4.2@global/bin:/Users/travis/.rvm/rubies/ruby-
>> > 2.4.2/bin:/Users/travis/.rvm/bin:/Users/travis/bin:/Users/
>> > travis/.local/bin:/Users/travis/.nvm/versions/node/v6.
>> > 11.4/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin'.
>> >
>> > The command "./configure" failed and exited with 1 during .
>> >
>> > Your build has been stopped.
>> >
>> > /Users/travis/.travis/job_stages: line 166: shell_session_update:
>> > command not found
>> >
>> > Looked into it, the builds started failing November 28th. This is around
>> > the same time when Travis CI upgraded their default xcode version to
>> 8.3.
>> > Here
>> > is the notification
>> > <https://blog.travis-ci.com/2017-11-21-xcode8-3-default-image-announce>
>> .
>> >
>> > Have identified a potential fix and tested it for my fork, the build
>> > completes successfully. Currently we don't install apr using brew
>> install,
>> > which is one of the pre-requisites as mentioned in the hawq incubator
>> wiki.
>> > The fix is to "brew install apr" and then force link it to the path
>> using
>> > "brew link apr --force. This resolves the problem.
>> >
>> > But I have couple of additional questions -
>> >
>> > 1. How did the apr get installed before, was it installed with some
>> other
>> > package. Asking this as few packages have been removed from the default
>> > image in xcode 8.3
>> >
>> > 2. Though the build for branches is failing continuously, why the build
>> > status for master is still green ?
>> >
>> > Anyhow, since apr is a dependency for our project my proposal is to add
>> a
>> > brew install to travis.yml to avoid failure due to such upgrade in
>> future.
>> >
>> > Let me know your thoughts, I can create a JIRA and already have a PR
>> ready.
>> >
>> > --
>> > Regards,
>> > Shubham
>> >
>>
>
>
>
> --
> Regards,
> Shubham Sharma
> Staff Customer Engineer
> Pivotal Global Support Services
> ssharma@pivotal.io
> Direct Tel: +1(510)-304-8201 <(510)%20304-8201>
> Office Hours: Mon-Fri 9:00 am to 5:00 pm PDT
> Out of Office Hours Contact +1 877-477-2269 <(877)%20477-2269>
>



-- 
Regards,
Shubham Sharma
Staff Customer Engineer
Pivotal Global Support Services
ssharma@pivotal.io
Direct Tel: +1(510)-304-8201
Office Hours: Mon-Fri 9:00 am to 5:00 pm PDT
Out of Office Hours Contact +1 877-477-2269

Re: Travis CI failing for Hawq

Posted by Shubham Sharma <ss...@pivotal.io>.

Thanks Radar, already submitted a PR
https://github.com/apache/incubator-hawq/pull/1317 . The build is in
progress and passed the failure stage. Hopefully build should complete in
another 10 minutes.

On Thu, Nov 30, 2017 at 6:08 PM, Radar Lei <rl...@pivotal.io> wrote:

> Hi Shubham,
>
> Thanks for help addressing this issue. I think you can just go ahead and
> fix it.
>
> For the question why master is still green, I think there is no PR was
> merged to master in the passed, so only PRs were tested by Travis.
>
> Regards,
> Radar
>
> On Fri, Dec 1, 2017 at 3:04 AM, Shubham Sharma <ss...@pivotal.io> wrote:
>
> > Hello folks,
> >
> > It looks like our Travis build is broken. I first noticed this for my own
> > fork's build and saw the same behavior in apache github repo as well. It
> is
> > failing with the error below
> >
> > configure: error: Please install apr from http://apr.apache.org/ and
> > add dir of 'apr-1-config' to env variable
> > '/Users/travis/.rvm/gems/ruby-2.4.2/bin:/Users/travis/.rvm/
> > gems/ruby-2.4.2@global/bin:/Users/travis/.rvm/rubies/ruby-
> > 2.4.2/bin:/Users/travis/.rvm/bin:/Users/travis/bin:/Users/
> > travis/.local/bin:/Users/travis/.nvm/versions/node/v6.
> > 11.4/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin'.
> >
> > The command "./configure" failed and exited with 1 during .
> >
> > Your build has been stopped.
> >
> > /Users/travis/.travis/job_stages: line 166: shell_session_update:
> > command not found
> >
> > Looked into it, the builds started failing November 28th. This is around
> > the same time when Travis CI upgraded their default xcode version to 8.3.
> > Here
> > is the notification
> > <https://blog.travis-ci.com/2017-11-21-xcode8-3-default-image-announce>
> .
> >
> > Have identified a potential fix and tested it for my fork, the build
> > completes successfully. Currently we don't install apr using brew
> install,
> > which is one of the pre-requisites as mentioned in the hawq incubator
> wiki.
> > The fix is to "brew install apr" and then force link it to the path using
> > "brew link apr --force. This resolves the problem.
> >
> > But I have couple of additional questions -
> >
> > 1. How did the apr get installed before, was it installed with some other
> > package. Asking this as few packages have been removed from the default
> > image in xcode 8.3
> >
> > 2. Though the build for branches is failing continuously, why the build
> > status for master is still green ?
> >
> > Anyhow, since apr is a dependency for our project my proposal is to add a
> > brew install to travis.yml to avoid failure due to such upgrade in
> future.
> >
> > Let me know your thoughts, I can create a JIRA and already have a PR
> ready.
> >
> > --
> > Regards,
> > Shubham
> >
>



-- 
Regards,
Shubham Sharma
Staff Customer Engineer
Pivotal Global Support Services
ssharma@pivotal.io
Direct Tel: +1(510)-304-8201
Office Hours: Mon-Fri 9:00 am to 5:00 pm PDT
Out of Office Hours Contact +1 877-477-2269