You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@nuttx.apache.org by Milan Obuch <nu...@dino.sk> on 2023/08/12 17:43:28 UTC
Building NuttX for PineCone (on FreeBSD)
Hi,
after some tests, with some hints and discussion with Lup, I am able to
build NuttX for PineCone (BL602 based evaluation board) on FreeBSD. I
am able to build almost all configurations present in recent sources (I
used sources from git, snapshot old maybe a week or two), with
configuration as follows:
tools/configure.sh bl602evb:dma BUILDS
tools/configure.sh bl602evb:elf FAILS
tools/configure.sh bl602evb:fpu BUILDS
tools/configure.sh bl602evb:gpio BUILDS
tools/configure.sh bl602evb:i2c BUILDS
tools/configure.sh bl602evb:nsh BUILDS
tools/configure.sh bl602evb:spi BUILDS
tools/configure.sh bl602evb:spiflash FAILS
tools/configure.sh bl602evb:timer BUILDS
tools/configure.sh bl602evb:wifi FAILS
I have no idea what elf and spiflash configurations are for, maybe
nothing interesting for me, but I'd like to get wifi configuration to
build. It fails with following:
CC: tcpblaster_cmdline.c
tcpblaster_cmdline.c:121:23: error: use of undeclared identifier 'AF_INET'
ret = inet_pton(AF_INET, argv[1], &g_tcpblasterserver_ipv4);
^
1 error generated.
gmake[3]: *** [Makefile:92: tcpblaster_cmdline.hobj] Error 1
gmake[2]: *** [Makefile:55: /wrk/usr/ports/devel/apache-nuttx/work/apps/examples/tcpblaster_context] Error 2
gmake[1]: *** [Makefile:168: context] Error 2
gmake: *** [tools/Unix.mk:443: /wrk/usr/ports/devel/apache-nuttx/work/apps/.context] Error 2
I was able to fix this one, more on the issue in next mail.
However, generated binaries (most of them) have a problem - 'help'
command does not work, it does not output anything, just new shell
prompt is displayed.
So, did anybody work with PineCone (or some BL602 based board)
recently? Could we get that fixed? It is small, cheap board usable for
many devices, worth having it working well, in my oppinion...
Regards,
Milan
Re: Building NuttX for PineCone (on FreeBSD)
Posted by Milan Obuch <nu...@dino.sk>.
On Sun, 13 Aug 2023 08:35:21 -0400
Nathan Hartman <ha...@gmail.com> wrote:
> On Sat, Aug 12, 2023 at 1:43 PM Milan Obuch <nu...@dino.sk> wrote:
>
> > Hi,
> >
> > after some tests, with some hints and discussion with Lup, I am
> > able to build NuttX for PineCone (BL602 based evaluation board) on
> > FreeBSD. I am able to build almost all configurations present in
> > recent sources (I used sources from git, snapshot old maybe a week
> > or two), with configuration as follows:
> >
> > tools/configure.sh bl602evb:dma BUILDS
> > tools/configure.sh bl602evb:elf FAILS
> > tools/configure.sh bl602evb:fpu BUILDS
> > tools/configure.sh bl602evb:gpio BUILDS
> > tools/configure.sh bl602evb:i2c BUILDS
> > tools/configure.sh bl602evb:nsh BUILDS
> > tools/configure.sh bl602evb:spi BUILDS
> > tools/configure.sh bl602evb:spiflash FAILS
> > tools/configure.sh bl602evb:timer BUILDS
> > tools/configure.sh bl602evb:wifi FAILS
> >
> > I have no idea what elf and spiflash configurations are for, maybe
> > nothing interesting for me, but I'd like to get wifi configuration
> > to build. It fails with following:
> >
> > CC: tcpblaster_cmdline.c
> > tcpblaster_cmdline.c:121:23: error: use of undeclared identifier
> > 'AF_INET' ret = inet_pton(AF_INET, argv[1],
> > &g_tcpblasterserver_ipv4); ^
> > 1 error generated.
> > gmake[3]: *** [Makefile:92: tcpblaster_cmdline.hobj] Error 1
> > gmake[2]: *** [Makefile:55:
> > /wrk/usr/ports/devel/apache-nuttx/work/apps/examples/tcpblaster_context]
> > Error 2
> > gmake[1]: *** [Makefile:168: context] Error 2
> > gmake: *** [tools/Unix.mk:443:
> > /wrk/usr/ports/devel/apache-nuttx/work/apps/.context] Error 2
> >
> > I was able to fix this one, more on the issue in next mail.
> >
> > However, generated binaries (most of them) have a problem - 'help'
> > command does not work, it does not output anything, just new shell
> > prompt is displayed.
>
> Do any other commands work?
>
I did not test everything, but in general, 'help' yields no output,
thus new prompt comes out, 'getprime' or 'timer' shows something, some
garbled command does not show anything. I am using 'help' to get
quickly list of available commands, when it works, and then I test all
of them. Maybe configurations needs some small changes, when some
refactoring was done in the past, those config files were not touched,
no idea.
What about elf and spiflash configurations? I don't know what they are
intended for, I was just trying every one as part of verification of a
build process.
Regards,
Milan
Re: Building NuttX for PineCone (on FreeBSD)
Posted by Nathan Hartman <ha...@gmail.com>.
On Sat, Aug 12, 2023 at 1:43 PM Milan Obuch <nu...@dino.sk> wrote:
> Hi,
>
> after some tests, with some hints and discussion with Lup, I am able to
> build NuttX for PineCone (BL602 based evaluation board) on FreeBSD. I
> am able to build almost all configurations present in recent sources (I
> used sources from git, snapshot old maybe a week or two), with
> configuration as follows:
>
> tools/configure.sh bl602evb:dma BUILDS
> tools/configure.sh bl602evb:elf FAILS
> tools/configure.sh bl602evb:fpu BUILDS
> tools/configure.sh bl602evb:gpio BUILDS
> tools/configure.sh bl602evb:i2c BUILDS
> tools/configure.sh bl602evb:nsh BUILDS
> tools/configure.sh bl602evb:spi BUILDS
> tools/configure.sh bl602evb:spiflash FAILS
> tools/configure.sh bl602evb:timer BUILDS
> tools/configure.sh bl602evb:wifi FAILS
>
> I have no idea what elf and spiflash configurations are for, maybe
> nothing interesting for me, but I'd like to get wifi configuration to
> build. It fails with following:
>
> CC: tcpblaster_cmdline.c
> tcpblaster_cmdline.c:121:23: error: use of undeclared identifier 'AF_INET'
> ret = inet_pton(AF_INET, argv[1], &g_tcpblasterserver_ipv4);
> ^
> 1 error generated.
> gmake[3]: *** [Makefile:92: tcpblaster_cmdline.hobj] Error 1
> gmake[2]: *** [Makefile:55:
> /wrk/usr/ports/devel/apache-nuttx/work/apps/examples/tcpblaster_context]
> Error 2
> gmake[1]: *** [Makefile:168: context] Error 2
> gmake: *** [tools/Unix.mk:443:
> /wrk/usr/ports/devel/apache-nuttx/work/apps/.context] Error 2
>
> I was able to fix this one, more on the issue in next mail.
>
> However, generated binaries (most of them) have a problem - 'help'
> command does not work, it does not output anything, just new shell
> prompt is displayed.
Do any other commands work?
Cheers
Nathan