You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users-cn@cloudstack.apache.org by zhangyan <zy...@neusoft.com> on 2015/05/26 09:38:56 UTC
CLoudStack 添加KVM后 系统虚拟机状态为空
各位好:
遇到一个问题,VMware上的一台VM上安装KVM及CloudStack Agent,将其添加
到CS4.3(简单网络)中去,系统虚拟机agent状态为空,console进去系统虚拟机,发
现它与来宾网络网关不通!!!这是什么原因?
篇日志如下:
KVM所在虚拟机网卡使用桥接模式:
eth0配置如下:
DEVICE=eth0
TYPE=Ethernet
ONBOOT=yes
HOTPLUG=no
BOOTPROTO=none
BRIDGE=cloudbr0
cloudbr0配置如下:
DEVICE=cloudbr0
ONBOOT=yes
BOOTPROTO=static
IPADDR=10.4.41.101
NETMASK=255.255.254.0
GATEWAY=10.4.40.1
DNS1=210.83.210.155
IPV6INIT=no
IPV6_AUTOCONF=no
DELAY=5
STP=off
TYPE=Bridge
---------------------------------------------------------------------------------------------------
Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s)
is intended only for the use of the intended recipient and may be confidential and/or privileged of
Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is
not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying
is strictly prohibited, and may be unlawful.If you have received this communication in error,please
immediately notify the sender by return e-mail, and delete the original message and all copies from
your system. Thank you.
---------------------------------------------------------------------------------------------------