You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@httpd.apache.org by Jonathon Koyle <li...@gmail.com> on 2018/10/31 16:07:37 UTC
Re: [users@httpd] invisible server
I'm sure he means 443 not 433 (80 and 443 being the standard ports for http
and https).
On Wed, Oct 31, 2018 at 7:37 AM Freek de Kruijf <f....@gmail.com>
wrote:
> Op woensdag 31 oktober 2018 12:48:42 CET schreef georg.chambert@telia.com:
> > Hi again, didnt work to turn DHCP off, just rendered the PC/server
> without
> > IP address (ie not even the local net)
>
> Right.
>
> > looking at WAN services, I get the following fields to fill (for "+ Add
> new
> > IPv4 port mapping" ):
> >
> > IPv4 Port forwarding table
> >
> > Name Protocol WAN port LAN port
> Destination IP Destination
> MAC
> >
> >
> >
> > so the "Destination" in this, would that actually be the PC/server IP
> (which
> > I then guess I have to set manually in the PC )
>
> Your PC/Server normally gets the same IP address from DHCP when it
> restarts,
> so you can use that address as Destination.
> For a web server you need to forward the external port 80 to the internal
> port
> 80 of your PC/Server. In case you use https you also need to forward 433
> to
> 433.
>
> --
> fr.gr.
>
> Freek de Kruijf
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
--
Jonathon Koyle
Re: [users@httpd] invisible server
Posted by Jonathon Koyle <li...@gmail.com>.
The protocol should be tcp. https://portforward.com/technicolor/ might
give you step by step instruction for you specific router. They recommend
static IP which probably isn't necessary for you, and they specify a
different port than you will likely use.
On Wed, Oct 31, 2018 at 10:07 AM Jonathon Koyle <li...@gmail.com>
wrote:
> I'm sure he means 443 not 433 (80 and 443 being the standard ports for
> http and https).
>
> On Wed, Oct 31, 2018 at 7:37 AM Freek de Kruijf <f....@gmail.com>
> wrote:
>
>> Op woensdag 31 oktober 2018 12:48:42 CET schreef georg.chambert@telia.com
>> :
>> > Hi again, didnt work to turn DHCP off, just rendered the PC/server
>> without
>> > IP address (ie not even the local net)
>>
>> Right.
>>
>> > looking at WAN services, I get the following fields to fill (for "+ Add
>> new
>> > IPv4 port mapping" ):
>> >
>> > IPv4 Port forwarding table
>> >
>> > Name Protocol WAN port LAN port
>> Destination IP Destination
>> MAC
>> >
>> >
>> >
>> > so the "Destination" in this, would that actually be the PC/server IP
>> (which
>> > I then guess I have to set manually in the PC )
>>
>> Your PC/Server normally gets the same IP address from DHCP when it
>> restarts,
>> so you can use that address as Destination.
>> For a web server you need to forward the external port 80 to the internal
>> port
>> 80 of your PC/Server. In case you use https you also need to forward 433
>> to
>> 433.
>>
>> --
>> fr.gr.
>>
>> Freek de Kruijf
>>
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>
> --
> Jonathon Koyle
>
--
Jonathon Koyle