You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@flex.apache.org by fl...@gmail.com on 2013/06/18 12:39:40 UTC
Build failed in Jenkins: flex-sdk_mustella #175
See <http://localhost:8080/job/flex-sdk_mustella/175/>
------------------------------------------
[...truncated 82944 lines...]
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs\DataGrid_LockedRC.swf (2268599 bytes)
[java] Choosing local runner bitmap save
[java] okey doke, going to compile C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.mxml
[java] Loading configuration file C:\jenkins_slave\workspace\flex-sdk_mustella\frameworks\flex-config.xml
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf (1384955 bytes)
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf (5765581 bytes)
[java] Choosing local runner bitmap save
[java] okey doke, going to compile C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.mxml
[java] Loading configuration file C:\jenkins_slave\workspace\flex-sdk_mustella\frameworks\flex-config.xml
[java] Choosing local runner bitmap save
[java] okey doke, going to compile C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.mxml
[java] Loading configuration file C:\jenkins_slave\workspace\flex-sdk_mustella\frameworks\flex-config.xml
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf (733356 bytes)
[java] nothing left to do
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.mxml(181): Warning: The CSS type selector 'spark.components.CheckBox' was not processed, because the type was not used in the application.
[java]
[java] s|CheckBox{
[java]
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf (1491235 bytes)
[java] All done with the compile
[java] leaving the compile, elapsed: 50
[java] ...via exit
[echo] compileswfs jreturn is 0
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
do_fail:
compileswfs:
getExcludes:
getExcludeIds:
populateExcludeTable:
[echo] populate exclude, got this for db time: 2013/06/18 05:37:33
justrun:
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
delete_cache:
[echo] delete cache: /Users/ApacheFlex/Library/Caches/Adobe/Flash Player/AssetCache
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
delete_cache:
[echo] delete cache: /Users/ApacheFlex/AppData/Roaming/Adobe/Flash Player/AssetCache
[delete] Deleting directory C:\Users\ApacheFlex\AppData\Roaming\Adobe\Flash Player\AssetCache\B2GMBUP4
[delete] Deleting directory C:\Users\ApacheFlex\AppData\Roaming\Adobe\Flash Player\AssetCache
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
delete_cache:
[echo] delete cache: C:\Users\ApacheFlex/Application Data/Adobe/Flash Player/AssetCache
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
android_runner:
ios_runner:
qnx_runner:
desktop_runner:
[echo] **** Willkommen auf Runner ****
[java] starting results server
[java] starting baseline server
[java] test script count: 6
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs
[java] starting the baseline server: Tue Jun 18 05:39:04 ACT 2013
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs
[java] time: 05:39:04.333
[java] Wrote file: c:/jenkins_slave/workspace/flex-sdk_mustella/mustella/tests/LangPacks/Japanese/SWFs/../tests/baselines/JA_PhoneNumberValidator_wrongLengthError.png.bad.png.xml length: 23679
[java] Wrote file: c:/jenkins_slave/workspace/flex-sdk_mustella/mustella/tests/LangPacks/Japanese/SWFs/../tests/baselines/JA_PhoneNumberValidator_wrongLengthError.png.bad.png length: 1769
[java] FAIL: LangPacks/Japanese/tests/phoneNumberValidatorTests JA_PhoneNumberValidator_wrongLengthError
[java] SCRIPTDONE! 05:39:08.991
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 05:39:08.991 waiting = 0
[java] After Wait loop 05:39:08.991 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 1
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs
[java] time: 05:39:11.286
[java] waited 2000
[java] ClobberProcess, it was already null
[java] SCRIPTDONE! 05:39:14.770
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 05:39:14.770 waiting = 0
[java] After Wait loop 05:39:14.770 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 2
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs\DataGrid_LockedRC.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs\DataGrid_LockedRC.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs\DataGrid_LockedRC.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs\DataGrid_LockedRC.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs\DataGrid_LockedRC.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs
[java] time: 05:39:17.043
[java] waited 2000
[java] ClobberProcess, it was already null
[java] SCRIPTDONE! 05:39:21.513
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 05:39:21.513 waiting = 0
[java] After Wait loop 05:39:21.513 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 3
[java] waited 2000
[java] ClobberProcess, it was already null
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\DataGrid\SWFs\DataGrid_LockedRC.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs
[java] time: 05:39:23.834
[java] SCRIPTDONE! 05:39:27.354
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 05:39:27.354 waiting = 0
[java] After Wait loop 05:39:27.354 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 4
[java] waited 1900
[java] ClobberProcess, it was already null
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs
[java] time: 05:39:29.589
[java] SCRIPTDONE! 05:39:33.344
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 05:39:33.344 waiting = 0
[java] After Wait loop 05:39:33.344 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 5
[java] waited 1900
[java] ClobberProcess, it was already null
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs
[java] time: 05:39:35.568
[java] SCRIPTDONE! 05:39:38.475
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 05:39:38.475 waiting = 0
[java] After Wait loop 05:39:38.475 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 6
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.log
[java] at the end of main
[java] Shutting down the results server
[java] shutting down the baseline server
[java] done waiting for results...bye
[java] =====================================================
[java] Passes: 5
[java] Fails: 1
[java] =====================================================
[java]
[java] =====================================================
[java] =====================================================
[java] Passed:
[java] =====================================================
[java] gumbo/components/Application/properties/Application_Properties Application_Properties_skin_test7 Passed
[java] gumbo/components/DataGrid/Properties/DataGrid_Properties_lockedRC DataGrid_Properties_LRC_runtimeLock_lockedRowCount10_hScroll Passed
[java] itemRenderers/Halo/List/test_scripts/List_itemRenderer DateFieldRenderer_Scrolling Passed
[java] itemRenderers/Spark/List/test_scripts/List_itemRenderer_spark DateFieldRenderer_Scrolling Passed
[java] resources/ResourceManager/Integration/ResourceManager_Integration_UIComponent_resourcesChanged ResourceManager_Integration_UIComponent_resourcesChanged_localeChain Passed
[java] =====================================================
[java] Failed:
[java] =====================================================
[java] LangPacks/Japanese/tests/phoneNumberValidatorTests JA_PhoneNumberValidator_wrongLengthError Failed CompareBitmap(body:step 7) compare returned[object BitmapData]
[java]
[java]
[java] =====================================================
[java] Passes: 5
[java] Fails: 1
[java] =====================================================
[java]
[java]
[java] Wrote summary to results.txt
[java] Wrote failures to failures.txt
BUILD FAILED
C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\build.xml:1538: The following error occurred while executing this line:
C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\build.xml:1656: Java returned: 1
Total time: 2 minutes 13 seconds
Build step 'Execute shell' marked build as failure
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Alex Harui <ah...@adobe.com>.
I would just be creating more png.xml files and checking them in. This
will have the side-effect of making a repo clone take longer, and slow
down git status further, but once done just about any player version
should work.
The process I use to create png.xml files is:
1) pick a folder of test that failed.
2) run that folder with -createImages (you can't always just run the
failures because prior tests can affect the display list)
3) run git status to make sure the png files for the failing tests have
not changed
4) if they haven't, add the png.xml files for the failing tests to git and
delete all of the others.
5) if the png files show up as modified, investigate further.
On 6/20/13 8:17 AM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>And if we solve them... will there be as many failures when we go back
>to 11.1? We were thinking we might run once a day against 11.1 and
>once a day against 11.7...
>
>EdB
>
>
>
>On Thu, Jun 20, 2013 at 5:12 PM, Alex Harui <ah...@adobe.com> wrote:
>> OK, but a reminder that there will be lots of bitmap compare failures
>>when
>> you switch to 11.7 and resolving them are not my favorite thing to do.
>>
>> On 6/20/13 4:19 AM, "Justin Mclean" <ju...@classsoftware.com> wrote:
>>
>>>Hi,
>>>
>>>> 3.7, I think... how can I be sure? I looked at the 'airsdk.xml' in
>>>> AIR_HOME and that has "<airSdk
>>>>xmlns="http://ns.adobe.com/air/sdk/3.7">"
>>>
>>>Sound right. Probably need to run the normal SDK tests with FP 11.7 as
>>>well.
>>>
>>>Perhaps it would be good to alternate what version of FP the tests are
>>>using ie stock standard 11.1, then 11.7 (latest release) and then 11.8
>>>beta?
>>>
>>>I noticed Adobe has moved to 11.7 as the extended support release () so
>>>perhaps we should target that but make sure it all work on 11.1?
>>>
>>>http://blogs.adobe.com/flashplayer/2013/05/extended-support-release-upda
>>>te
>>>d-to-flash-player-11-7.html
>>>
>>>Thanks,
>>>Justin
>>>
>>>
>>
>
>
>
>--
>Ix Multimedia Software
>
>Jan Luykenstraat 27
>3521 VB Utrecht
>
>T. 06-51952295
>I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
And if we solve them... will there be as many failures when we go back
to 11.1? We were thinking we might run once a day against 11.1 and
once a day against 11.7...
EdB
On Thu, Jun 20, 2013 at 5:12 PM, Alex Harui <ah...@adobe.com> wrote:
> OK, but a reminder that there will be lots of bitmap compare failures when
> you switch to 11.7 and resolving them are not my favorite thing to do.
>
> On 6/20/13 4:19 AM, "Justin Mclean" <ju...@classsoftware.com> wrote:
>
>>Hi,
>>
>>> 3.7, I think... how can I be sure? I looked at the 'airsdk.xml' in
>>> AIR_HOME and that has "<airSdk xmlns="http://ns.adobe.com/air/sdk/3.7">"
>>
>>Sound right. Probably need to run the normal SDK tests with FP 11.7 as
>>well.
>>
>>Perhaps it would be good to alternate what version of FP the tests are
>>using ie stock standard 11.1, then 11.7 (latest release) and then 11.8
>>beta?
>>
>>I noticed Adobe has moved to 11.7 as the extended support release () so
>>perhaps we should target that but make sure it all work on 11.1?
>>
>>http://blogs.adobe.com/flashplayer/2013/05/extended-support-release-update
>>d-to-flash-player-11-7.html
>>
>>Thanks,
>>Justin
>>
>>
>
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> Ok, having to pick two, would you rather run against 11.1 and 11.7
> (both 'long term support') or against 11.1 and the latest and greatest
> released version (currently 11.7, but soon 11.8)?
+1 for 11.1 and 11.7 from me but other people may think differently.
Justin
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
Ok, having to pick two, would you rather run against 11.1 and 11.7
(both 'long term support') or against 11.1 and the latest and greatest
released version (currently 11.7, but soon 11.8)?
For AIR we'll always run against the most recent release (non-beta).
EdB
On Thu, Jun 20, 2013 at 1:42 PM, Justin Mclean <ju...@classsoftware.com> wrote:
> Hi,
>
>> If 11.7 is the new long term support version, why not move to that as
>> the "default" FP version for Apache Flex? Why stick with 11.1?
> We don't want to force people to use the very latest, many enterprises have locked down systems and may not be able to move to FP 11.7.
>
>> And how about the AIR version?
> Re AIR version it's no so much an issue as above (captive runtime etc). Most people expect the latest to work and we've had a few complaints that the installer get the latest.
>
> Thanks,
> Justin
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> If 11.7 is the new long term support version, why not move to that as
> the "default" FP version for Apache Flex? Why stick with 11.1?
We don't want to force people to use the very latest, many enterprises have locked down systems and may not be able to move to FP 11.7.
> And how about the AIR version?
Re AIR version it's no so much an issue as above (captive runtime etc). Most people expect the latest to work and we've had a few complaints that the installer get the latest.
Thanks,
Justin
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
If 11.7 is the new long term support version, why not move to that as
the "default" FP version for Apache Flex? Why stick with 11.1?
Also, I think we can squeeze 2 full runs of all three targets in a
day. I can set up two sets of tests (e.g. 11.7 and the latests and
greatest - currently the 11.8 beta) or run the same set twice (my
suggestion would be 11.7).
And how about the AIR version?
EdB
On Thu, Jun 20, 2013 at 1:19 PM, Justin Mclean <ju...@classsoftware.com> wrote:
> Hi,
>
>> 3.7, I think... how can I be sure? I looked at the 'airsdk.xml' in
>> AIR_HOME and that has "<airSdk xmlns="http://ns.adobe.com/air/sdk/3.7">"
>
> Sound right. Probably need to run the normal SDK tests with FP 11.7 as well.
>
> Perhaps it would be good to alternate what version of FP the tests are using ie stock standard 11.1, then 11.7 (latest release) and then 11.8 beta?
>
> I noticed Adobe has moved to 11.7 as the extended support release () so perhaps we should target that but make sure it all work on 11.1?
>
> http://blogs.adobe.com/flashplayer/2013/05/extended-support-release-updated-to-flash-player-11-7.html
>
> Thanks,
> Justin
>
>
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Alex Harui <ah...@adobe.com>.
OK, but a reminder that there will be lots of bitmap compare failures when
you switch to 11.7 and resolving them are not my favorite thing to do.
On 6/20/13 4:19 AM, "Justin Mclean" <ju...@classsoftware.com> wrote:
>Hi,
>
>> 3.7, I think... how can I be sure? I looked at the 'airsdk.xml' in
>> AIR_HOME and that has "<airSdk xmlns="http://ns.adobe.com/air/sdk/3.7">"
>
>Sound right. Probably need to run the normal SDK tests with FP 11.7 as
>well.
>
>Perhaps it would be good to alternate what version of FP the tests are
>using ie stock standard 11.1, then 11.7 (latest release) and then 11.8
>beta?
>
>I noticed Adobe has moved to 11.7 as the extended support release () so
>perhaps we should target that but make sure it all work on 11.1?
>
>http://blogs.adobe.com/flashplayer/2013/05/extended-support-release-update
>d-to-flash-player-11-7.html
>
>Thanks,
>Justin
>
>
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> 3.7, I think... how can I be sure? I looked at the 'airsdk.xml' in
> AIR_HOME and that has "<airSdk xmlns="http://ns.adobe.com/air/sdk/3.7">"
Sound right. Probably need to run the normal SDK tests with FP 11.7 as well.
Perhaps it would be good to alternate what version of FP the tests are using ie stock standard 11.1, then 11.7 (latest release) and then 11.8 beta?
I noticed Adobe has moved to 11.7 as the extended support release () so perhaps we should target that but make sure it all work on 11.1?
http://blogs.adobe.com/flashplayer/2013/05/extended-support-release-updated-to-flash-player-11-7.html
Thanks,
Justin
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Alex Harui <ah...@adobe.com>.
FWIW, I think the tests are still running in some earlier namespace.
On 6/20/13 2:56 AM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>3.7, I think... how can I be sure? I looked at the 'airsdk.xml' in
>AIR_HOME and that has "<airSdk
>xmlns="http://ns.adobe.com/air/sdk/3.7">"
>
>EdB
>
>
>
>On Thu, Jun 20, 2013 at 11:52 AM, Justin Mclean
><ju...@classsoftware.com> wrote:
>> Hi,
>>
>>> I just ran "-apollo" successfully on the VM. The initial run reports
>>> 1055 passing and 68 failing tests.
>> What version of AIR out of interest?
>>
>> Justin
>
>
>
>--
>Ix Multimedia Software
>
>Jan Luykenstraat 27
>3521 VB Utrecht
>
>T. 06-51952295
>I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
3.7, I think... how can I be sure? I looked at the 'airsdk.xml' in
AIR_HOME and that has "<airSdk
xmlns="http://ns.adobe.com/air/sdk/3.7">"
EdB
On Thu, Jun 20, 2013 at 11:52 AM, Justin Mclean
<ju...@classsoftware.com> wrote:
> Hi,
>
>> I just ran "-apollo" successfully on the VM. The initial run reports
>> 1055 passing and 68 failing tests.
> What version of AIR out of interest?
>
> Justin
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> I just ran "-apollo" successfully on the VM. The initial run reports
> 1055 passing and 68 failing tests.
What version of AIR out of interest?
Justin
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Alex Harui <ah...@adobe.com>.
On 6/20/13 5:04 AM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>Interesting...
>
>Ran "-apollo", this time got 1059 passing and 68 failing. Note the 4
>'extra' passing results, while there are still 68 failing tests...
>Where did those come from?
Sometimes a SWF just doesn't startup. I have no idea why. But there is
no infrastructure to catch that and report how many tests were in it.
>
>The "-apollo -failures" no works, but reports 0 passing and 52
>failing... What happened to the remaining 16 failures?
This could be an error in the testDir properties of the missing tests.
>
>I'm going to combine what I have and do a full run for 'main',
>'apollo' and 'mobile' combined. That'll take the next 12 hours or so
>;-)
>
>EdB
>
>
>
>On Thu, Jun 20, 2013 at 11:23 AM, Erik de Bruin <er...@ixsoftware.nl>
>wrote:
>> Hi,
>>
>> I just ran "-apollo" successfully on the VM. The initial run reports
>> 1055 passing and 68 failing tests. The -failures run reports 0 passing
>> and 0 failures, so something is wrong there...
>>
>> Now moving on to the "-mobile" tests...
>>
>> EdB
>>
>>
>>
>> On Wed, Jun 19, 2013 at 10:01 PM, Alex Harui <ah...@adobe.com> wrote:
>>> I forgot we added a -mobile option to mini_run.sh. You have to set up
>>>a
>>> local.properties as specified in the wiki except but leave adl_extras
>>>and
>>> run_mobile_tests and use_apollo commented out. They will get set by
>>>the
>>> -mobile option.
>>>
>>> On 6/19/13 12:49 PM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>>>
>>>>> 20 minutes for AIR.
>>>>> 82 minutes for mobile.
>>>>> Add more for -failures runs if needed.
>>>>
>>>>Ok, I'll add these 2 runs to jenkins.sh. Might be a good idea to keep
>>>>the 'failures.txt' of each completed set (regular + -failures)?
>>> I suppose, or you could just bail at whatever run first produces
>>>failures
>>> that a -failures run won't clean up. The -failures run must also have
>>>the
>>> -apollo or -mobile option.
>>>
>>>>
>>>>> I got a lot of bitmap failures that I'm looking into now. Which
>>>>>reminded
>>>>> me that if a check-in goes bad and generates a lot of bitmap failures
>>>>>that
>>>>> slows things down (all the bad pngs have to be written to disk). Is
>>>>>there
>>>>> any way to set up jenkins to wait N minutes after a job completes
>>>>>before
>>>>> starting the next job? What would happen if we run every 12 hours
>>>>>but
>>>>> sometimes a job doesn't complete in those 12 hours?
>>>>
>>>>I don't think Jenkins will stop one job just to start it again because
>>>>of a schedule... But I'll read up on it. The current run is 9 hrs, so
>>>>adding 1.5 hrs still leaves us with plenty of room on 'reasonably
>>>>clean' runs, right?
>>>>
>>>>EdB
>>>>
>>>>
>>>>
>>>>--
>>>>Ix Multimedia Software
>>>>
>>>>Jan Luykenstraat 27
>>>>3521 VB Utrecht
>>>>
>>>>T. 06-51952295
>>>>I. www.ixsoftware.nl
>>>
>>
>>
>>
>> --
>> Ix Multimedia Software
>>
>> Jan Luykenstraat 27
>> 3521 VB Utrecht
>>
>> T. 06-51952295
>> I. www.ixsoftware.nl
>
>
>
>--
>Ix Multimedia Software
>
>Jan Luykenstraat 27
>3521 VB Utrecht
>
>T. 06-51952295
>I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
Interesting...
Ran "-apollo", this time got 1059 passing and 68 failing. Note the 4
'extra' passing results, while there are still 68 failing tests...
Where did those come from?
The "-apollo -failures" no works, but reports 0 passing and 52
failing... What happened to the remaining 16 failures?
I'm going to combine what I have and do a full run for 'main',
'apollo' and 'mobile' combined. That'll take the next 12 hours or so
;-)
EdB
On Thu, Jun 20, 2013 at 11:23 AM, Erik de Bruin <er...@ixsoftware.nl> wrote:
> Hi,
>
> I just ran "-apollo" successfully on the VM. The initial run reports
> 1055 passing and 68 failing tests. The -failures run reports 0 passing
> and 0 failures, so something is wrong there...
>
> Now moving on to the "-mobile" tests...
>
> EdB
>
>
>
> On Wed, Jun 19, 2013 at 10:01 PM, Alex Harui <ah...@adobe.com> wrote:
>> I forgot we added a -mobile option to mini_run.sh. You have to set up a
>> local.properties as specified in the wiki except but leave adl_extras and
>> run_mobile_tests and use_apollo commented out. They will get set by the
>> -mobile option.
>>
>> On 6/19/13 12:49 PM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>>
>>>> 20 minutes for AIR.
>>>> 82 minutes for mobile.
>>>> Add more for -failures runs if needed.
>>>
>>>Ok, I'll add these 2 runs to jenkins.sh. Might be a good idea to keep
>>>the 'failures.txt' of each completed set (regular + -failures)?
>> I suppose, or you could just bail at whatever run first produces failures
>> that a -failures run won't clean up. The -failures run must also have the
>> -apollo or -mobile option.
>>
>>>
>>>> I got a lot of bitmap failures that I'm looking into now. Which
>>>>reminded
>>>> me that if a check-in goes bad and generates a lot of bitmap failures
>>>>that
>>>> slows things down (all the bad pngs have to be written to disk). Is
>>>>there
>>>> any way to set up jenkins to wait N minutes after a job completes before
>>>> starting the next job? What would happen if we run every 12 hours but
>>>> sometimes a job doesn't complete in those 12 hours?
>>>
>>>I don't think Jenkins will stop one job just to start it again because
>>>of a schedule... But I'll read up on it. The current run is 9 hrs, so
>>>adding 1.5 hrs still leaves us with plenty of room on 'reasonably
>>>clean' runs, right?
>>>
>>>EdB
>>>
>>>
>>>
>>>--
>>>Ix Multimedia Software
>>>
>>>Jan Luykenstraat 27
>>>3521 VB Utrecht
>>>
>>>T. 06-51952295
>>>I. www.ixsoftware.nl
>>
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
Ok, the "-mobile" target also runs now. I see 3932 passing and 18 failing tests.
Now I'll re-run the "-apollo" target to see if the changes to the
-failures command have a positive effect...
EdB
On Thu, Jun 20, 2013 at 12:26 PM, Erik de Bruin <er...@ixsoftware.nl> wrote:
>> 1055 passing and 68 failing tests. The -failures run reports 0 passing
>> and 0 failures, so something is wrong there...
>
> Ah, it looks like what's wrong was me... I didn't put in '-apollo' on
> the failures run. The full command for failures on the AIR tests is
> now: "sh ./mini_run.sh -apollo -failures" Is that correct?
>
> EdB
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Alex Harui <ah...@adobe.com>.
On 6/20/13 3:26 AM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>> 1055 passing and 68 failing tests. The -failures run reports 0 passing
>> and 0 failures, so something is wrong there...
>
>Ah, it looks like what's wrong was me... I didn't put in '-apollo' on
>the failures run. The full command for failures on the AIR tests is
>now: "sh ./mini_run.sh -apollo -failures" Is that correct?
Yup.
Also note that there is a -mobile option that won't require you to muck
with the local.properties file. You can setup local.properties once but
leave run_mobile_tests and adl_extras commented out and when you run with
-mobile it will set those properties for you.
>
>EdB
>
>
>
>--
>Ix Multimedia Software
>
>Jan Luykenstraat 27
>3521 VB Utrecht
>
>T. 06-51952295
>I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
> 1055 passing and 68 failing tests. The -failures run reports 0 passing
> and 0 failures, so something is wrong there...
Ah, it looks like what's wrong was me... I didn't put in '-apollo' on
the failures run. The full command for failures on the AIR tests is
now: "sh ./mini_run.sh -apollo -failures" Is that correct?
EdB
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
Hi,
I just ran "-apollo" successfully on the VM. The initial run reports
1055 passing and 68 failing tests. The -failures run reports 0 passing
and 0 failures, so something is wrong there...
Now moving on to the "-mobile" tests...
EdB
On Wed, Jun 19, 2013 at 10:01 PM, Alex Harui <ah...@adobe.com> wrote:
> I forgot we added a -mobile option to mini_run.sh. You have to set up a
> local.properties as specified in the wiki except but leave adl_extras and
> run_mobile_tests and use_apollo commented out. They will get set by the
> -mobile option.
>
> On 6/19/13 12:49 PM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>
>>> 20 minutes for AIR.
>>> 82 minutes for mobile.
>>> Add more for -failures runs if needed.
>>
>>Ok, I'll add these 2 runs to jenkins.sh. Might be a good idea to keep
>>the 'failures.txt' of each completed set (regular + -failures)?
> I suppose, or you could just bail at whatever run first produces failures
> that a -failures run won't clean up. The -failures run must also have the
> -apollo or -mobile option.
>
>>
>>> I got a lot of bitmap failures that I'm looking into now. Which
>>>reminded
>>> me that if a check-in goes bad and generates a lot of bitmap failures
>>>that
>>> slows things down (all the bad pngs have to be written to disk). Is
>>>there
>>> any way to set up jenkins to wait N minutes after a job completes before
>>> starting the next job? What would happen if we run every 12 hours but
>>> sometimes a job doesn't complete in those 12 hours?
>>
>>I don't think Jenkins will stop one job just to start it again because
>>of a schedule... But I'll read up on it. The current run is 9 hrs, so
>>adding 1.5 hrs still leaves us with plenty of room on 'reasonably
>>clean' runs, right?
>>
>>EdB
>>
>>
>>
>>--
>>Ix Multimedia Software
>>
>>Jan Luykenstraat 27
>>3521 VB Utrecht
>>
>>T. 06-51952295
>>I. www.ixsoftware.nl
>
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Alex Harui <ah...@adobe.com>.
I forgot we added a -mobile option to mini_run.sh. You have to set up a
local.properties as specified in the wiki except but leave adl_extras and
run_mobile_tests and use_apollo commented out. They will get set by the
-mobile option.
On 6/19/13 12:49 PM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>> 20 minutes for AIR.
>> 82 minutes for mobile.
>> Add more for -failures runs if needed.
>
>Ok, I'll add these 2 runs to jenkins.sh. Might be a good idea to keep
>the 'failures.txt' of each completed set (regular + -failures)?
I suppose, or you could just bail at whatever run first produces failures
that a -failures run won't clean up. The -failures run must also have the
-apollo or -mobile option.
>
>> I got a lot of bitmap failures that I'm looking into now. Which
>>reminded
>> me that if a check-in goes bad and generates a lot of bitmap failures
>>that
>> slows things down (all the bad pngs have to be written to disk). Is
>>there
>> any way to set up jenkins to wait N minutes after a job completes before
>> starting the next job? What would happen if we run every 12 hours but
>> sometimes a job doesn't complete in those 12 hours?
>
>I don't think Jenkins will stop one job just to start it again because
>of a schedule... But I'll read up on it. The current run is 9 hrs, so
>adding 1.5 hrs still leaves us with plenty of room on 'reasonably
>clean' runs, right?
>
>EdB
>
>
>
>--
>Ix Multimedia Software
>
>Jan Luykenstraat 27
>3521 VB Utrecht
>
>T. 06-51952295
>I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
> 20 minutes for AIR.
> 82 minutes for mobile.
> Add more for -failures runs if needed.
Ok, I'll add these 2 runs to jenkins.sh. Might be a good idea to keep
the 'failures.txt' of each completed set (regular + -failures)?
> I got a lot of bitmap failures that I'm looking into now. Which reminded
> me that if a check-in goes bad and generates a lot of bitmap failures that
> slows things down (all the bad pngs have to be written to disk). Is there
> any way to set up jenkins to wait N minutes after a job completes before
> starting the next job? What would happen if we run every 12 hours but
> sometimes a job doesn't complete in those 12 hours?
I don't think Jenkins will stop one job just to start it again because
of a schedule... But I'll read up on it. The current run is 9 hrs, so
adding 1.5 hrs still leaves us with plenty of room on 'reasonably
clean' runs, right?
EdB
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Alex Harui <ah...@adobe.com>.
I just tried it on my Mac.
20 minutes for AIR.
82 minutes for mobile.
Add more for -failures runs if needed.
I got a lot of bitmap failures that I'm looking into now. Which reminded
me that if a check-in goes bad and generates a lot of bitmap failures that
slows things down (all the bad pngs have to be written to disk). Is there
any way to set up jenkins to wait N minutes after a job completes before
starting the next job? What would happen if we run every 12 hours but
sometimes a job doesn't complete in those 12 hours?
-Alex
On 6/19/13 7:28 AM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>Can you give me an indication how long a run of each type takes?
>
>EdB
>
>
>
>On Wednesday, June 19, 2013, Alex Harui wrote:
>
>> For AIR it should be ./mini_run.sh -apollo tests/apollo
>>
>> For mobile you'll need to swap in a different local.properties before
>> running mini_run on the mobile directory. See the wiki page for how to
>> set that up.
>>
>> -Alex
>>
>> On 6/19/13 2:48 AM, "Erik de Bruin" <erik@ixsoftware.nl <javascript:;>>
>> wrote:
>>
>> >11.1, indeed.
>> >
>> >And I guess not on the AIR and mobile tests... what ant
>> >targets/switches make that happen?
>> >
>> >EdB
>> >
>> >
>> >
>> >On Wed, Jun 19, 2013 at 11:41 AM, Justin Mclean
>><jmclean@apache.org<javascript:;>
>> >
>> >wrote:
>> >> Hi,
>> >>
>> >>> Cool, we had a clean run!!!
>> >>
>> >> What version of FP was being used? (Windows and 11.1????)
>> >>
>> >> And you'll probably hate me for bringing this up but did we run the
>> >>mobile or AIR tests?
>> >>
>> >> Thanks,
>> >> Justin
>> >
>> >
>> >
>> >--
>> >Ix Multimedia Software
>> >
>> >Jan Luykenstraat 27
>> >3521 VB Utrecht
>> >
>> >T. 06-51952295
>> >I. www.ixsoftware.nl
>>
>>
>
>--
>Ix Multimedia Software
>
>Jan Luykenstraat 27
>3521 VB Utrecht
>
>T. 06-51952295
>I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
Can you give me an indication how long a run of each type takes?
EdB
On Wednesday, June 19, 2013, Alex Harui wrote:
> For AIR it should be ./mini_run.sh -apollo tests/apollo
>
> For mobile you'll need to swap in a different local.properties before
> running mini_run on the mobile directory. See the wiki page for how to
> set that up.
>
> -Alex
>
> On 6/19/13 2:48 AM, "Erik de Bruin" <erik@ixsoftware.nl <javascript:;>>
> wrote:
>
> >11.1, indeed.
> >
> >And I guess not on the AIR and mobile tests... what ant
> >targets/switches make that happen?
> >
> >EdB
> >
> >
> >
> >On Wed, Jun 19, 2013 at 11:41 AM, Justin Mclean <jmclean@apache.org<javascript:;>
> >
> >wrote:
> >> Hi,
> >>
> >>> Cool, we had a clean run!!!
> >>
> >> What version of FP was being used? (Windows and 11.1????)
> >>
> >> And you'll probably hate me for bringing this up but did we run the
> >>mobile or AIR tests?
> >>
> >> Thanks,
> >> Justin
> >
> >
> >
> >--
> >Ix Multimedia Software
> >
> >Jan Luykenstraat 27
> >3521 VB Utrecht
> >
> >T. 06-51952295
> >I. www.ixsoftware.nl
>
>
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Alex Harui <ah...@adobe.com>.
For AIR it should be ./mini_run.sh -apollo tests/apollo
For mobile you'll need to swap in a different local.properties before
running mini_run on the mobile directory. See the wiki page for how to
set that up.
-Alex
On 6/19/13 2:48 AM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
>11.1, indeed.
>
>And I guess not on the AIR and mobile tests... what ant
>targets/switches make that happen?
>
>EdB
>
>
>
>On Wed, Jun 19, 2013 at 11:41 AM, Justin Mclean <jm...@apache.org>
>wrote:
>> Hi,
>>
>>> Cool, we had a clean run!!!
>>
>> What version of FP was being used? (Windows and 11.1????)
>>
>> And you'll probably hate me for bringing this up but did we run the
>>mobile or AIR tests?
>>
>> Thanks,
>> Justin
>
>
>
>--
>Ix Multimedia Software
>
>Jan Luykenstraat 27
>3521 VB Utrecht
>
>T. 06-51952295
>I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
11.1, indeed.
And I guess not on the AIR and mobile tests... what ant
targets/switches make that happen?
EdB
On Wed, Jun 19, 2013 at 11:41 AM, Justin Mclean <jm...@apache.org> wrote:
> Hi,
>
>> Cool, we had a clean run!!!
>
> What version of FP was being used? (Windows and 11.1????)
>
> And you'll probably hate me for bringing this up but did we run the mobile or AIR tests?
>
> Thanks,
> Justin
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Justin Mclean <jm...@apache.org>.
Hi,
> Cool, we had a clean run!!!
What version of FP was being used? (Windows and 11.1????)
And you'll probably hate me for bringing this up but did we run the mobile or AIR tests?
Thanks,
Justin
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by OmPrakash Muppirala <bi...@gmail.com>.
This is definitely a great milestone :-)
Om
On Jun 19, 2013 2:32 AM, "Erik de Bruin" <er...@ixsoftware.nl> wrote:
> Cool, we had a clean run!!!
>
> Let the games begin ;-)
>
> EdB
>
>
>
> On Wed, Jun 19, 2013 at 11:01 AM, <fl...@gmail.com> wrote:
> > See <http://localhost:8080/job/flex-sdk_mustella/177/changes>
> >
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
>
Re: Jenkins build is back to normal : flex-sdk_mustella #177
Posted by Erik de Bruin <er...@ixsoftware.nl>.
Cool, we had a clean run!!!
Let the games begin ;-)
EdB
On Wed, Jun 19, 2013 at 11:01 AM, <fl...@gmail.com> wrote:
> See <http://localhost:8080/job/flex-sdk_mustella/177/changes>
>
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Jenkins build is back to normal : flex-sdk_mustella #177
Posted by fl...@gmail.com.
See <http://localhost:8080/job/flex-sdk_mustella/177/changes>
Build failed in Jenkins: flex-sdk_mustella #176
Posted by fl...@gmail.com.
See <http://localhost:8080/job/flex-sdk_mustella/176/changes>
Changes:
[jmclean] FLEX-24257 Fixed measured width of date field as it may vary month by month based on format.
[jmclean] Change out of range month should only be in range 0 -11
------------------------------------------
[...truncated 82919 lines...]
[java] Loading configuration file C:\jenkins_slave\workspace\flex-sdk_mustella\frameworks\flex-config.xml
[java] Loading configuration file C:\jenkins_slave\workspace\flex-sdk_mustella\frameworks\flex-config.xml
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf (1385028 bytes)
[java] Choosing local runner bitmap save
[java] okey doke, going to compile C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.mxml
[java] Loading configuration file C:\jenkins_slave\workspace\flex-sdk_mustella\frameworks\flex-config.xml
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf (5765684 bytes)
[java] Choosing local runner bitmap save
[java] okey doke, going to compile C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.mxml
[java] Loading configuration file C:\jenkins_slave\workspace\flex-sdk_mustella\frameworks\flex-config.xml
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf (733355 bytes)
[java] nothing left to do
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.mxml(181): Warning: The CSS type selector 'spark.components.CheckBox' was not processed, because the type was not used in the application.
[java]
[java] s|CheckBox{
[java]
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf (1491248 bytes)
[java] All done with the compile
[java] leaving the compile, elapsed: 50
[java] ...via exit
[echo] compileswfs jreturn is 0
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
do_fail:
compileswfs:
getExcludes:
getExcludeIds:
populateExcludeTable:
[echo] populate exclude, got this for db time: 2013/06/18 16:00:53
justrun:
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
delete_cache:
[echo] delete cache: /Users/ApacheFlex/Library/Caches/Adobe/Flash Player/AssetCache
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
delete_cache:
[echo] delete cache: /Users/ApacheFlex/AppData/Roaming/Adobe/Flash Player/AssetCache
[delete] Deleting directory C:\Users\ApacheFlex\AppData\Roaming\Adobe\Flash Player\AssetCache\PNR3PQEF
[delete] Deleting directory C:\Users\ApacheFlex\AppData\Roaming\Adobe\Flash Player\AssetCache
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
delete_cache:
[echo] delete cache: C:\Users\ApacheFlex/Application Data/Adobe/Flash Player/AssetCache
[loadfile] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\local.properties doesn't exist
android_runner:
ios_runner:
qnx_runner:
desktop_runner:
[echo] **** Willkommen auf Runner ****
[java] starting results server
[java] starting baseline server
[java] test script count: 6
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs
[java] starting the baseline server: Tue Jun 18 16:02:26 ACT 2013
[java] time: 16:02:26.416
[java] Wrote file: c:/jenkins_slave/workspace/flex-sdk_mustella/mustella/tests/LangPacks/Japanese/SWFs/../tests/baselines/JA_PhoneNumberValidator_wrongLengthError.png.bad.png.xml length: 23679
[java] Wrote file: c:/jenkins_slave/workspace/flex-sdk_mustella/mustella/tests/LangPacks/Japanese/SWFs/../tests/baselines/JA_PhoneNumberValidator_wrongLengthError.png.bad.png length: 1769
[java] FAIL: LangPacks/Japanese/tests/phoneNumberValidatorTests JA_PhoneNumberValidator_wrongLengthError
[java] SCRIPTDONE! 16:02:30.805
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 16:02:30.805 waiting = 0
[java] After Wait loop 16:02:30.805 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 1
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\LangPacks\Japanese\SWFs\LangPackApp.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs
[java] time: 16:02:33.063
[java] waited 2000
[java] ClobberProcess, it was already null
[java] SCRIPTDONE! 16:02:36.509
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 16:02:36.509 waiting = 0
[java] After Wait loop 16:02:36.509 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 2
[java] waited 2000
[java] ClobberProcess, it was already null
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\Application\SWFs\Application_Properties_App1.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\ListDragDrop\swfs\SparkDNDListBasic.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\ListDragDrop\swfs\SparkDNDListBasic.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\ListDragDrop\swfs\SparkDNDListBasic.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\ListDragDrop\swfs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\ListDragDrop\swfs\SparkDNDListBasic.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\ListDragDrop\swfs\SparkDNDListBasic.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\ListDragDrop\swfs
[java] time: 16:02:38.852
[java] SCRIPTDONE! 16:02:43.626
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 16:02:43.626 waiting = 0
[java] After Wait loop 16:02:43.626 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 3
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\gumbo\components\ListDragDrop\swfs\SparkDNDListBasic.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs
[java] time: 16:02:45.917
[java] waited 2000
[java] ClobberProcess, it was already null
[java] SCRIPTDONE! 16:02:49.388
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 16:02:49.388 waiting = 0
[java] After Wait loop 16:02:49.388 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 4
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Halo\List\SWFs\List_itemRendererTests.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs
[java] time: 16:02:51.670
[java] waited 2000
[java] ClobberProcess, it was already null
[java] SCRIPTDONE! 16:02:55.499
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 16:02:55.499 waiting = 0
[java] After Wait loop 16:02:55.499 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 5
[java] waited 1900
[java] ClobberProcess, it was already null
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\itemRenderers\Spark\List\SWFs\List_itemRendererTests_spark.log
[java] new test file: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf
[java] ******** cmdArr before:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf
[java] ******** moreParameters before:
[java] ******** cmdArr after:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe
[java] C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf
[java] getting directory from the swf file
[java] derived directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs
[java] Launching:
[java] C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf Launching: C:\Program Files (x86)\flashplayer11_1r102_55_win_sa_debug_32bit.exe C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.swf
[java] USING directory: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs
[java] time: 16:02:57.730
[java] SCRIPTDONE! 16:03:00.725
[java] GET /ScriptComplete?0 HTTP/1.1
[java] Before Wait loop 16:03:00.725 waiting = 0
[java] After Wait loop 16:03:00.725 waiting = 0
[java] clobberProcess false
[java] Total Results so far: 6
[java] Grab log, do parse = false
[java] Grabbing the log from: C:\Users\ApacheFlex\AppData/Roaming\Macromedia/Flash Player/Logs/flashlog.txt to: C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\tests\resources\ResourceManager\SWFs\ResourceManagerApp.log
[java] at the end of main
[java] Shutting down the results server
[java] shutting down the baseline server
[java] done waiting for results...bye
[java] =====================================================
[java] Passes: 5
[java] Fails: 1
[java] =====================================================
[java]
[java] =====================================================
[java] =====================================================
[java] Passed:
[java] =====================================================
[java] gumbo/components/Application/properties/Application_Properties Application_Properties_skin_test7 Passed
[java] gumbo/components/ListDragDrop/events/SparkDNDList_events HListAbcDND1_dragComplete Passed
[java] itemRenderers/Halo/List/test_scripts/List_itemRenderer DateFieldRenderer_Scrolling Passed
[java] itemRenderers/Spark/List/test_scripts/List_itemRenderer_spark DateFieldRenderer_Scrolling Passed
[java] resources/ResourceManager/Integration/ResourceManager_Integration_UIComponent_resourcesChanged ResourceManager_Integration_UIComponent_resourcesChanged_localeChain Passed
[java] =====================================================
[java] Failed:
[java] =====================================================
[java] LangPacks/Japanese/tests/phoneNumberValidatorTests JA_PhoneNumberValidator_wrongLengthError Failed CompareBitmap(body:step 7) compare returned[object BitmapData]
[java]
[java]
[java] =====================================================
[java] Passes: 5
[java] Fails: 1
[java] =====================================================
[java]
[java]
[java] Wrote summary to results.txt
[java] Wrote failures to failures.txt
BUILD FAILED
C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\build.xml:1538: The following error occurred while executing this line:
C:\jenkins_slave\workspace\flex-sdk_mustella\mustella\build.xml:1656: Java returned: 1
Total time: 2 minutes 14 seconds
waited 2000
ClobberProcess, it was already null
Build step 'Execute shell' marked build as failure