You are viewing a plain text version of this content. The canonical link for it is here.
Posted to rivet-dev@tcl.apache.org by Georgios Petasis <pe...@iit.demokritos.gr> on 2014/12/15 16:25:02 UTC
Rivet SVN HEAD...
Hi all,
I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
14.10 64 bit.
While I don't get an error while calling a simple script (which contains
only a simple "puts hello"), nothing is returned.
Any ideas why?
(No error is printed in /var/log/apache2/error.log either.)
Regards,
George
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Massimo Manghi <ma...@unipr.it>.
OK, I have to rewrite the INSTALL file and explain well how to build the
code in trunk. Moreover I declared that I would have made the
experimental code as default (it passes all the tests, thus in principle
it shouldn't break the application level) and keep apache-2 as an option
-- Massimo
On 12/15/2014 05:37 PM, Georgios Petasis wrote:
> Dear Massimo,
>
> Switching MPM to prefork fixed the issue.
> (Experimental code does not seem to run with event MPM, at least for the
> returned body.)
>
> Thanks,
>
> George
>
> On 15/12/2014 18:29, Massimo Manghi wrote:
>> Hold on, if you built the apache-2 code you must run the prefork MPM,
>> with the experimental code you have the option of running also worker.
>> The event MPM should work with the threaded bridge but I have to check
>> if the right bridge gets loaded
>>
>> -- Massimo
>>
>> On 12/15/2014 05:26 PM, Georgios Petasis wrote:
>>> On 15/12/2014 18:16, Massimo Manghi wrote:
>>>> which MPM are you running? Do you have any error in the error log?
>>>
>>> Good question :D
>>> There is no error in the log, but it seems that ubuntu uses the event
>>> MPM:
>>>
>>> apachectl -V
>>> AH00558: apache2: Could not reliably determine the server's fully
>>> qualified domain name, using 127.0.1.1. Set the 'ServerName' directive
>>> globally to suppress this message
>>> Server version: Apache/2.4.10 (Ubuntu)
>>> Server built: Jul 25 2014 10:24:21
>>> Server's Module Magic Number: 20120211:36
>>> Server loaded: APR 1.5.1, APR-UTIL 1.5.3
>>> Compiled using: APR 1.5.1, APR-UTIL 1.5.3
>>> Architecture: 64-bit
>>> Server MPM: event
>>> threaded: yes (fixed thread count)
>>> forked: yes (variable process count)
>>> Server compiled with....
>>> -D APR_HAS_SENDFILE
>>> -D APR_HAS_MMAP
>>> -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
>>> -D APR_USE_SYSVSEM_SERIALIZE
>>> -D APR_USE_PTHREAD_SERIALIZE
>>> -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
>>> -D APR_HAS_OTHER_CHILD
>>> -D AP_HAVE_RELIABLE_PIPED_LOGS
>>> -D DYNAMIC_MODULE_LIMIT=256
>>> -D HTTPD_ROOT="/etc/apache2"
>>> -D SUEXEC_BIN="/usr/lib/apache2/suexec"
>>> -D DEFAULT_PIDLOG="/var/run/apache2.pid"
>>> -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
>>> -D DEFAULT_ERRORLOG="logs/error_log"
>>> -D AP_TYPES_CONFIG_FILE="mime.types"
>>> -D SERVER_CONFIG_FILE="apache2.conf"
>>>
>>> George
>>>>
>>>> -- Massimo
>>>>
>>>> On 12/15/2014 05:14 PM, Georgios Petasis wrote:
>>>>> Dear Massimo,
>>>>>
>>>>> Thanks for the info. I tried compiling both codes, and both return no
>>>>> result.
>>>>> I can see the returned headers, but the body is missing (completely).
>>>>>
>>>>> Best,
>>>>>
>>>>> George
>>>>>
>>>>>
>>>>> On 15/12/2014 17:48, Massimo Manghi wrote:
>>>>>> replace
>>>>>>
>>>>>> --with-apache-version=2
>>>>>> with
>>>>>>
>>>>>> --with-rivet-core=experimental or --with-rivet-code=apache-2
>>>>>>
>>>>>> -- Massimo
>>>>>>
>>>>>> On 12/15/2014 04:39 PM, Georgios Petasis wrote:
>>>>>>> On 15/12/2014 17:30, Massimo Manghi wrote:
>>>>>>>> Hi George
>>>>>>>>
>>>>>>>> did you build the experimental or the traditional (apache-2) code?
>>>>>>> Hm, I don't know. I followed (my) instractions here:
>>>>>>> http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Step 5:
>>>>>>>
>>>>>>> cd rivet
>>>>>>> sh genconf.sh(this may failwith an error)
>>>>>>> sh genconf.sh
>>>>>>> autoreconf-fi
>>>>>>> sh configure--enable-64bit --enable-threads \
>>>>>>> --with-tcl=/opt/ActiveTcl-8.6/lib \
>>>>>>> --with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
>>>>>>> --with-apxs=/usr/bin/apxs2 \
>>>>>>> --with-apache-version=2 \
>>>>>>> --with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
>>>>>>> --enable-version-display
>>>>>>>
>>>>>>>
>>>>>>> Best,
>>>>>>>
>>>>>>> George
>>>>>>>>
>>>>>>>> -- Massimo
>>>>>>>>
>>>>>>>> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>>>>>>>>> Hi all,
>>>>>>>>>
>>>>>>>>> I have just compiled the latest HEAD of Rivet from SVN under
>>>>>>>>> Ubuntu
>>>>>>>>> 14.10 64 bit.
>>>>>>>>> While I don't get an error while calling a simple script (which
>>>>>>>>> contains
>>>>>>>>> only a simple "puts hello"), nothing is returned.
>>>>>>>>> Any ideas why?
>>>>>>>>>
>>>>>>>>> (No error is printed in /var/log/apache2/error.log either.)
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> George
>>>>>>>>>
>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>>>>>>>>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Georgios Petasis <pe...@iit.demokritos.gr>.
Dear Massimo,
Switching MPM to prefork fixed the issue.
(Experimental code does not seem to run with event MPM, at least for the
returned body.)
Thanks,
George
On 15/12/2014 18:29, Massimo Manghi wrote:
> Hold on, if you built the apache-2 code you must run the prefork MPM,
> with the experimental code you have the option of running also worker.
> The event MPM should work with the threaded bridge but I have to check
> if the right bridge gets loaded
>
> -- Massimo
>
> On 12/15/2014 05:26 PM, Georgios Petasis wrote:
>> On 15/12/2014 18:16, Massimo Manghi wrote:
>>> which MPM are you running? Do you have any error in the error log?
>>
>> Good question :D
>> There is no error in the log, but it seems that ubuntu uses the event
>> MPM:
>>
>> apachectl -V
>> AH00558: apache2: Could not reliably determine the server's fully
>> qualified domain name, using 127.0.1.1. Set the 'ServerName' directive
>> globally to suppress this message
>> Server version: Apache/2.4.10 (Ubuntu)
>> Server built: Jul 25 2014 10:24:21
>> Server's Module Magic Number: 20120211:36
>> Server loaded: APR 1.5.1, APR-UTIL 1.5.3
>> Compiled using: APR 1.5.1, APR-UTIL 1.5.3
>> Architecture: 64-bit
>> Server MPM: event
>> threaded: yes (fixed thread count)
>> forked: yes (variable process count)
>> Server compiled with....
>> -D APR_HAS_SENDFILE
>> -D APR_HAS_MMAP
>> -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
>> -D APR_USE_SYSVSEM_SERIALIZE
>> -D APR_USE_PTHREAD_SERIALIZE
>> -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
>> -D APR_HAS_OTHER_CHILD
>> -D AP_HAVE_RELIABLE_PIPED_LOGS
>> -D DYNAMIC_MODULE_LIMIT=256
>> -D HTTPD_ROOT="/etc/apache2"
>> -D SUEXEC_BIN="/usr/lib/apache2/suexec"
>> -D DEFAULT_PIDLOG="/var/run/apache2.pid"
>> -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
>> -D DEFAULT_ERRORLOG="logs/error_log"
>> -D AP_TYPES_CONFIG_FILE="mime.types"
>> -D SERVER_CONFIG_FILE="apache2.conf"
>>
>> George
>>>
>>> -- Massimo
>>>
>>> On 12/15/2014 05:14 PM, Georgios Petasis wrote:
>>>> Dear Massimo,
>>>>
>>>> Thanks for the info. I tried compiling both codes, and both return no
>>>> result.
>>>> I can see the returned headers, but the body is missing (completely).
>>>>
>>>> Best,
>>>>
>>>> George
>>>>
>>>>
>>>> On 15/12/2014 17:48, Massimo Manghi wrote:
>>>>> replace
>>>>>
>>>>> --with-apache-version=2
>>>>> with
>>>>>
>>>>> --with-rivet-core=experimental or --with-rivet-code=apache-2
>>>>>
>>>>> -- Massimo
>>>>>
>>>>> On 12/15/2014 04:39 PM, Georgios Petasis wrote:
>>>>>> On 15/12/2014 17:30, Massimo Manghi wrote:
>>>>>>> Hi George
>>>>>>>
>>>>>>> did you build the experimental or the traditional (apache-2) code?
>>>>>> Hm, I don't know. I followed (my) instractions here:
>>>>>> http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Step 5:
>>>>>>
>>>>>> cd rivet
>>>>>> sh genconf.sh(this may failwith an error)
>>>>>> sh genconf.sh
>>>>>> autoreconf-fi
>>>>>> sh configure--enable-64bit --enable-threads \
>>>>>> --with-tcl=/opt/ActiveTcl-8.6/lib \
>>>>>> --with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
>>>>>> --with-apxs=/usr/bin/apxs2 \
>>>>>> --with-apache-version=2 \
>>>>>> --with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
>>>>>> --enable-version-display
>>>>>>
>>>>>>
>>>>>> Best,
>>>>>>
>>>>>> George
>>>>>>>
>>>>>>> -- Massimo
>>>>>>>
>>>>>>> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> I have just compiled the latest HEAD of Rivet from SVN under
>>>>>>>> Ubuntu
>>>>>>>> 14.10 64 bit.
>>>>>>>> While I don't get an error while calling a simple script (which
>>>>>>>> contains
>>>>>>>> only a simple "puts hello"), nothing is returned.
>>>>>>>> Any ideas why?
>>>>>>>>
>>>>>>>> (No error is printed in /var/log/apache2/error.log either.)
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> George
>>>>>>>>
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>>>>>>>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Massimo Manghi <ma...@unipr.it>.
Hold on, if you built the apache-2 code you must run the prefork MPM,
with the experimental code you have the option of running also worker.
The event MPM should work with the threaded bridge but I have to check
if the right bridge gets loaded
-- Massimo
On 12/15/2014 05:26 PM, Georgios Petasis wrote:
> On 15/12/2014 18:16, Massimo Manghi wrote:
>> which MPM are you running? Do you have any error in the error log?
>
> Good question :D
> There is no error in the log, but it seems that ubuntu uses the event MPM:
>
> apachectl -V
> AH00558: apache2: Could not reliably determine the server's fully
> qualified domain name, using 127.0.1.1. Set the 'ServerName' directive
> globally to suppress this message
> Server version: Apache/2.4.10 (Ubuntu)
> Server built: Jul 25 2014 10:24:21
> Server's Module Magic Number: 20120211:36
> Server loaded: APR 1.5.1, APR-UTIL 1.5.3
> Compiled using: APR 1.5.1, APR-UTIL 1.5.3
> Architecture: 64-bit
> Server MPM: event
> threaded: yes (fixed thread count)
> forked: yes (variable process count)
> Server compiled with....
> -D APR_HAS_SENDFILE
> -D APR_HAS_MMAP
> -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
> -D APR_USE_SYSVSEM_SERIALIZE
> -D APR_USE_PTHREAD_SERIALIZE
> -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
> -D APR_HAS_OTHER_CHILD
> -D AP_HAVE_RELIABLE_PIPED_LOGS
> -D DYNAMIC_MODULE_LIMIT=256
> -D HTTPD_ROOT="/etc/apache2"
> -D SUEXEC_BIN="/usr/lib/apache2/suexec"
> -D DEFAULT_PIDLOG="/var/run/apache2.pid"
> -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
> -D DEFAULT_ERRORLOG="logs/error_log"
> -D AP_TYPES_CONFIG_FILE="mime.types"
> -D SERVER_CONFIG_FILE="apache2.conf"
>
> George
>>
>> -- Massimo
>>
>> On 12/15/2014 05:14 PM, Georgios Petasis wrote:
>>> Dear Massimo,
>>>
>>> Thanks for the info. I tried compiling both codes, and both return no
>>> result.
>>> I can see the returned headers, but the body is missing (completely).
>>>
>>> Best,
>>>
>>> George
>>>
>>>
>>> On 15/12/2014 17:48, Massimo Manghi wrote:
>>>> replace
>>>>
>>>> --with-apache-version=2
>>>> with
>>>>
>>>> --with-rivet-core=experimental or --with-rivet-code=apache-2
>>>>
>>>> -- Massimo
>>>>
>>>> On 12/15/2014 04:39 PM, Georgios Petasis wrote:
>>>>> On 15/12/2014 17:30, Massimo Manghi wrote:
>>>>>> Hi George
>>>>>>
>>>>>> did you build the experimental or the traditional (apache-2) code?
>>>>> Hm, I don't know. I followed (my) instractions here:
>>>>> http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
>>>>>
>>>>>
>>>>>
>>>>> Step 5:
>>>>>
>>>>> cd rivet
>>>>> sh genconf.sh(this may failwith an error)
>>>>> sh genconf.sh
>>>>> autoreconf-fi
>>>>> sh configure--enable-64bit --enable-threads \
>>>>> --with-tcl=/opt/ActiveTcl-8.6/lib \
>>>>> --with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
>>>>> --with-apxs=/usr/bin/apxs2 \
>>>>> --with-apache-version=2 \
>>>>> --with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
>>>>> --enable-version-display
>>>>>
>>>>>
>>>>> Best,
>>>>>
>>>>> George
>>>>>>
>>>>>> -- Massimo
>>>>>>
>>>>>> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>>>>>>> Hi all,
>>>>>>>
>>>>>>> I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
>>>>>>> 14.10 64 bit.
>>>>>>> While I don't get an error while calling a simple script (which
>>>>>>> contains
>>>>>>> only a simple "puts hello"), nothing is returned.
>>>>>>> Any ideas why?
>>>>>>>
>>>>>>> (No error is printed in /var/log/apache2/error.log either.)
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> George
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>>
>>>>>>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>>>>>>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Massimo Manghi <ma...@unipr.it>.
try loading the worker or prefork MPM.
-- M
On 12/15/2014 05:26 PM, Georgios Petasis wrote:
> On 15/12/2014 18:16, Massimo Manghi wrote:
>> which MPM are you running? Do you have any error in the error log?
>
> Good question :D
> There is no error in the log, but it seems that ubuntu uses the event MPM:
>
> apachectl -V
> AH00558: apache2: Could not reliably determine the server's fully
> qualified domain name, using 127.0.1.1. Set the 'ServerName' directive
> globally to suppress this message
> Server version: Apache/2.4.10 (Ubuntu)
> Server built: Jul 25 2014 10:24:21
> Server's Module Magic Number: 20120211:36
> Server loaded: APR 1.5.1, APR-UTIL 1.5.3
> Compiled using: APR 1.5.1, APR-UTIL 1.5.3
> Architecture: 64-bit
> Server MPM: event
> threaded: yes (fixed thread count)
> forked: yes (variable process count)
> Server compiled with....
> -D APR_HAS_SENDFILE
> -D APR_HAS_MMAP
> -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
> -D APR_USE_SYSVSEM_SERIALIZE
> -D APR_USE_PTHREAD_SERIALIZE
> -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
> -D APR_HAS_OTHER_CHILD
> -D AP_HAVE_RELIABLE_PIPED_LOGS
> -D DYNAMIC_MODULE_LIMIT=256
> -D HTTPD_ROOT="/etc/apache2"
> -D SUEXEC_BIN="/usr/lib/apache2/suexec"
> -D DEFAULT_PIDLOG="/var/run/apache2.pid"
> -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
> -D DEFAULT_ERRORLOG="logs/error_log"
> -D AP_TYPES_CONFIG_FILE="mime.types"
> -D SERVER_CONFIG_FILE="apache2.conf"
>
> George
>>
>> -- Massimo
>>
>> On 12/15/2014 05:14 PM, Georgios Petasis wrote:
>>> Dear Massimo,
>>>
>>> Thanks for the info. I tried compiling both codes, and both return no
>>> result.
>>> I can see the returned headers, but the body is missing (completely).
>>>
>>> Best,
>>>
>>> George
>>>
>>>
>>> On 15/12/2014 17:48, Massimo Manghi wrote:
>>>> replace
>>>>
>>>> --with-apache-version=2
>>>> with
>>>>
>>>> --with-rivet-core=experimental or --with-rivet-code=apache-2
>>>>
>>>> -- Massimo
>>>>
>>>> On 12/15/2014 04:39 PM, Georgios Petasis wrote:
>>>>> On 15/12/2014 17:30, Massimo Manghi wrote:
>>>>>> Hi George
>>>>>>
>>>>>> did you build the experimental or the traditional (apache-2) code?
>>>>> Hm, I don't know. I followed (my) instractions here:
>>>>> http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
>>>>>
>>>>>
>>>>>
>>>>> Step 5:
>>>>>
>>>>> cd rivet
>>>>> sh genconf.sh(this may failwith an error)
>>>>> sh genconf.sh
>>>>> autoreconf-fi
>>>>> sh configure--enable-64bit --enable-threads \
>>>>> --with-tcl=/opt/ActiveTcl-8.6/lib \
>>>>> --with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
>>>>> --with-apxs=/usr/bin/apxs2 \
>>>>> --with-apache-version=2 \
>>>>> --with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
>>>>> --enable-version-display
>>>>>
>>>>>
>>>>> Best,
>>>>>
>>>>> George
>>>>>>
>>>>>> -- Massimo
>>>>>>
>>>>>> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>>>>>>> Hi all,
>>>>>>>
>>>>>>> I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
>>>>>>> 14.10 64 bit.
>>>>>>> While I don't get an error while calling a simple script (which
>>>>>>> contains
>>>>>>> only a simple "puts hello"), nothing is returned.
>>>>>>> Any ideas why?
>>>>>>>
>>>>>>> (No error is printed in /var/log/apache2/error.log either.)
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> George
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>>
>>>>>>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>>>>>>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Georgios Petasis <pe...@iit.demokritos.gr>.
On 15/12/2014 18:16, Massimo Manghi wrote:
> which MPM are you running? Do you have any error in the error log?
Good question :D
There is no error in the log, but it seems that ubuntu uses the event MPM:
apachectl -V
AH00558: apache2: Could not reliably determine the server's fully
qualified domain name, using 127.0.1.1. Set the 'ServerName' directive
globally to suppress this message
Server version: Apache/2.4.10 (Ubuntu)
Server built: Jul 25 2014 10:24:21
Server's Module Magic Number: 20120211:36
Server loaded: APR 1.5.1, APR-UTIL 1.5.3
Compiled using: APR 1.5.1, APR-UTIL 1.5.3
Architecture: 64-bit
Server MPM: event
threaded: yes (fixed thread count)
forked: yes (variable process count)
Server compiled with....
-D APR_HAS_SENDFILE
-D APR_HAS_MMAP
-D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
-D APR_USE_SYSVSEM_SERIALIZE
-D APR_USE_PTHREAD_SERIALIZE
-D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
-D APR_HAS_OTHER_CHILD
-D AP_HAVE_RELIABLE_PIPED_LOGS
-D DYNAMIC_MODULE_LIMIT=256
-D HTTPD_ROOT="/etc/apache2"
-D SUEXEC_BIN="/usr/lib/apache2/suexec"
-D DEFAULT_PIDLOG="/var/run/apache2.pid"
-D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
-D DEFAULT_ERRORLOG="logs/error_log"
-D AP_TYPES_CONFIG_FILE="mime.types"
-D SERVER_CONFIG_FILE="apache2.conf"
George
>
> -- Massimo
>
> On 12/15/2014 05:14 PM, Georgios Petasis wrote:
>> Dear Massimo,
>>
>> Thanks for the info. I tried compiling both codes, and both return no
>> result.
>> I can see the returned headers, but the body is missing (completely).
>>
>> Best,
>>
>> George
>>
>>
>> On 15/12/2014 17:48, Massimo Manghi wrote:
>>> replace
>>>
>>> --with-apache-version=2
>>> with
>>>
>>> --with-rivet-core=experimental or --with-rivet-code=apache-2
>>>
>>> -- Massimo
>>>
>>> On 12/15/2014 04:39 PM, Georgios Petasis wrote:
>>>> On 15/12/2014 17:30, Massimo Manghi wrote:
>>>>> Hi George
>>>>>
>>>>> did you build the experimental or the traditional (apache-2) code?
>>>> Hm, I don't know. I followed (my) instractions here:
>>>> http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
>>>>
>>>>
>>>>
>>>> Step 5:
>>>>
>>>> cd rivet
>>>> sh genconf.sh(this may failwith an error)
>>>> sh genconf.sh
>>>> autoreconf-fi
>>>> sh configure--enable-64bit --enable-threads \
>>>> --with-tcl=/opt/ActiveTcl-8.6/lib \
>>>> --with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
>>>> --with-apxs=/usr/bin/apxs2 \
>>>> --with-apache-version=2 \
>>>> --with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
>>>> --enable-version-display
>>>>
>>>>
>>>> Best,
>>>>
>>>> George
>>>>>
>>>>> -- Massimo
>>>>>
>>>>> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
>>>>>> 14.10 64 bit.
>>>>>> While I don't get an error while calling a simple script (which
>>>>>> contains
>>>>>> only a simple "puts hello"), nothing is returned.
>>>>>> Any ideas why?
>>>>>>
>>>>>> (No error is printed in /var/log/apache2/error.log either.)
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> George
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>>
>>>>>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>>>>>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Massimo Manghi <ma...@unipr.it>.
which MPM are you running? Do you have any error in the error log?
-- Massimo
On 12/15/2014 05:14 PM, Georgios Petasis wrote:
> Dear Massimo,
>
> Thanks for the info. I tried compiling both codes, and both return no
> result.
> I can see the returned headers, but the body is missing (completely).
>
> Best,
>
> George
>
>
> On 15/12/2014 17:48, Massimo Manghi wrote:
>> replace
>>
>> --with-apache-version=2
>> with
>>
>> --with-rivet-core=experimental or --with-rivet-code=apache-2
>>
>> -- Massimo
>>
>> On 12/15/2014 04:39 PM, Georgios Petasis wrote:
>>> On 15/12/2014 17:30, Massimo Manghi wrote:
>>>> Hi George
>>>>
>>>> did you build the experimental or the traditional (apache-2) code?
>>> Hm, I don't know. I followed (my) instractions here:
>>> http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
>>>
>>>
>>> Step 5:
>>>
>>> cd rivet
>>> sh genconf.sh(this may failwith an error)
>>> sh genconf.sh
>>> autoreconf-fi
>>> sh configure--enable-64bit --enable-threads \
>>> --with-tcl=/opt/ActiveTcl-8.6/lib \
>>> --with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
>>> --with-apxs=/usr/bin/apxs2 \
>>> --with-apache-version=2 \
>>> --with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
>>> --enable-version-display
>>>
>>>
>>> Best,
>>>
>>> George
>>>>
>>>> -- Massimo
>>>>
>>>> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>>>>> Hi all,
>>>>>
>>>>> I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
>>>>> 14.10 64 bit.
>>>>> While I don't get an error while calling a simple script (which
>>>>> contains
>>>>> only a simple "puts hello"), nothing is returned.
>>>>> Any ideas why?
>>>>>
>>>>> (No error is printed in /var/log/apache2/error.log either.)
>>>>>
>>>>> Regards,
>>>>>
>>>>> George
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>>>>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Georgios Petasis <pe...@iit.demokritos.gr>.
Dear Massimo,
Thanks for the info. I tried compiling both codes, and both return no
result.
I can see the returned headers, but the body is missing (completely).
Best,
George
On 15/12/2014 17:48, Massimo Manghi wrote:
> replace
>
> --with-apache-version=2
> with
>
> --with-rivet-core=experimental or --with-rivet-code=apache-2
>
> -- Massimo
>
> On 12/15/2014 04:39 PM, Georgios Petasis wrote:
>> On 15/12/2014 17:30, Massimo Manghi wrote:
>>> Hi George
>>>
>>> did you build the experimental or the traditional (apache-2) code?
>> Hm, I don't know. I followed (my) instractions here:
>> http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
>>
>>
>> Step 5:
>>
>> cd rivet
>> sh genconf.sh(this may failwith an error)
>> sh genconf.sh
>> autoreconf-fi
>> sh configure--enable-64bit --enable-threads \
>> --with-tcl=/opt/ActiveTcl-8.6/lib \
>> --with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
>> --with-apxs=/usr/bin/apxs2 \
>> --with-apache-version=2 \
>> --with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
>> --enable-version-display
>>
>>
>> Best,
>>
>> George
>>>
>>> -- Massimo
>>>
>>> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>>>> Hi all,
>>>>
>>>> I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
>>>> 14.10 64 bit.
>>>> While I don't get an error while calling a simple script (which
>>>> contains
>>>> only a simple "puts hello"), nothing is returned.
>>>> Any ideas why?
>>>>
>>>> (No error is printed in /var/log/apache2/error.log either.)
>>>>
>>>> Regards,
>>>>
>>>> George
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>>>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Massimo Manghi <ma...@unipr.it>.
replace
--with-apache-version=2
with
--with-rivet-core=experimental or --with-rivet-code=apache-2
-- Massimo
On 12/15/2014 04:39 PM, Georgios Petasis wrote:
> On 15/12/2014 17:30, Massimo Manghi wrote:
>> Hi George
>>
>> did you build the experimental or the traditional (apache-2) code?
> Hm, I don't know. I followed (my) instractions here:
> http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
>
> Step 5:
>
> cd rivet
> sh genconf.sh(this may failwith an error)
> sh genconf.sh
> autoreconf-fi
> sh configure--enable-64bit --enable-threads \
> --with-tcl=/opt/ActiveTcl-8.6/lib \
> --with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
> --with-apxs=/usr/bin/apxs2 \
> --with-apache-version=2 \
> --with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
> --enable-version-display
>
>
> Best,
>
> George
>>
>> -- Massimo
>>
>> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>>> Hi all,
>>>
>>> I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
>>> 14.10 64 bit.
>>> While I don't get an error while calling a simple script (which contains
>>> only a simple "puts hello"), nothing is returned.
>>> Any ideas why?
>>>
>>> (No error is printed in /var/log/apache2/error.log either.)
>>>
>>> Regards,
>>>
>>> George
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Georgios Petasis <pe...@iit.demokritos.gr>.
On 15/12/2014 17:30, Massimo Manghi wrote:
> Hi George
>
> did you build the experimental or the traditional (apache-2) code?
Hm, I don't know. I followed (my) instractions here:
http://www.ellogon.org/index.php/support/installing-ellogon-services/43-installing-ellogon-http-rest-services-ubuntu
Step 5:
cd rivet
sh genconf.sh(this may failwith an error)
sh genconf.sh
autoreconf-fi
sh configure--enable-64bit --enable-threads \
--with-tcl=/opt/ActiveTcl-8.6/lib \
--with-tclsh=/opt/ActiveTcl-8.6/bin/tclsh8.6 \
--with-apxs=/usr/bin/apxs2 \
--with-apache-version=2 \
--with-rivet-target-dir=/usr/lib/tcltk/rivet2.2 \
--enable-version-display
Best,
George
>
> -- Massimo
>
> On 12/15/2014 04:25 PM, Georgios Petasis wrote:
>> Hi all,
>>
>> I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
>> 14.10 64 bit.
>> While I don't get an error while calling a simple script (which contains
>> only a simple "puts hello"), nothing is returned.
>> Any ideas why?
>>
>> (No error is printed in /var/log/apache2/error.log either.)
>>
>> Regards,
>>
>> George
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
>> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org
Re: Rivet SVN HEAD...
Posted by Massimo Manghi <ma...@unipr.it>.
Hi George
did you build the experimental or the traditional (apache-2) code?
-- Massimo
On 12/15/2014 04:25 PM, Georgios Petasis wrote:
> Hi all,
>
> I have just compiled the latest HEAD of Rivet from SVN under Ubuntu
> 14.10 64 bit.
> While I don't get an error while calling a simple script (which contains
> only a simple "puts hello"), nothing is returned.
> Any ideas why?
>
> (No error is printed in /var/log/apache2/error.log either.)
>
> Regards,
>
> George
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
> For additional commands, e-mail: rivet-dev-help@tcl.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: rivet-dev-unsubscribe@tcl.apache.org
For additional commands, e-mail: rivet-dev-help@tcl.apache.org