You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@commons.apache.org by mt...@apache.org on 2009/11/11 22:20:15 UTC
svn commit: r835075 [2/5] - in
/commons/sandbox/runtime/trunk/src/main/native: Makefile.in Makefile.msc.in
configure srclib/sqlite/ srclib/sqlite/README srclib/sqlite/config.h
srclib/sqlite/sqlite3.c srclib/sqlite/sqlite3.h srclib/sqlite/sqlite3ext.h
Added: commons/sandbox/runtime/trunk/src/main/native/srclib/sqlite/sqlite3.c
URL: http://svn.apache.org/viewvc/commons/sandbox/runtime/trunk/src/main/native/srclib/sqlite/sqlite3.c?rev=835075&view=auto
==============================================================================
--- commons/sandbox/runtime/trunk/src/main/native/srclib/sqlite/sqlite3.c (added)
+++ commons/sandbox/runtime/trunk/src/main/native/srclib/sqlite/sqlite3.c Wed Nov 11 21:20:09 2009
@@ -0,0 +1,110843 @@
+/******************************************************************************
+** This file is an amalgamation of many separate C source files from SQLite
+** version 3.6.20. By combining all the individual C code files into this
+** single large file, the entire code can be compiled as a one translation
+** unit. This allows many compilers to do optimizations that would not be
+** possible if the files were compiled separately. Performance improvements
+** of 5% are more are commonly seen when SQLite is compiled as a single
+** translation unit.
+**
+** This file is all you need to compile SQLite. To use SQLite in other
+** programs, you need this file and the "sqlite3.h" header file that defines
+** the programming interface to the SQLite library. (If you do not have
+** the "sqlite3.h" header file at hand, you will find a copy embedded within
+** the text of this file. Search for "Begin file sqlite3.h" to find the start
+** of the embedded sqlite3.h header file.) Additional code files may be needed
+** if you want a wrapper to interface SQLite with your choice of programming
+** language. The code for the "sqlite3" command-line shell is also in a
+** separate file. This file contains only code for the core SQLite library.
+*/
+#define SQLITE_CORE 1
+#define SQLITE_AMALGAMATION 1
+#ifndef SQLITE_PRIVATE
+# define SQLITE_PRIVATE static
+#endif
+#ifndef SQLITE_API
+# define SQLITE_API
+#endif
+/************** Begin file sqliteInt.h ***************************************/
+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** Internal interface definitions for SQLite.
+**
+*/
+#ifndef _SQLITEINT_H_
+#define _SQLITEINT_H_
+
+/*
+** These #defines should enable >2GB file support on POSIX if the
+** underlying operating system supports it. If the OS lacks
+** large file support, or if the OS is windows, these should be no-ops.
+**
+** Ticket #2739: The _LARGEFILE_SOURCE macro must appear before any
+** system #includes. Hence, this block of code must be the very first
+** code in all source files.
+**
+** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch
+** on the compiler command line. This is necessary if you are compiling
+** on a recent machine (ex: Red Hat 7.2) but you want your code to work
+** on an older machine (ex: Red Hat 6.0). If you compile on Red Hat 7.2
+** without this option, LFS is enable. But LFS does not exist in the kernel
+** in Red Hat 6.0, so the code won't work. Hence, for maximum binary
+** portability you should omit LFS.
+**
+** Similar is true for Mac OS X. LFS is only supported on Mac OS X 9 and later.
+*/
+#ifndef SQLITE_DISABLE_LFS
+# define _LARGE_FILE 1
+# ifndef _FILE_OFFSET_BITS
+# define _FILE_OFFSET_BITS 64
+# endif
+# define _LARGEFILE_SOURCE 1
+#endif
+
+/*
+** Include the configuration header output by 'configure' if we're using the
+** autoconf-based build
+*/
+#ifdef _HAVE_SQLITE_CONFIG_H
+#include "config.h"
+#endif
+
+/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/
+/************** Begin file sqliteLimit.h *************************************/
+/*
+** 2007 May 7
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+**
+** This file defines various limits of what SQLite can process.
+**
+** @(#) $Id: sqliteLimit.h,v 1.10 2009/01/10 16:15:09 danielk1977 Exp $
+*/
+
+/*
+** The maximum length of a TEXT or BLOB in bytes. This also
+** limits the size of a row in a table or index.
+**
+** The hard limit is the ability of a 32-bit signed integer
+** to count the size: 2^31-1 or 2147483647.
+*/
+#ifndef SQLITE_MAX_LENGTH
+# define SQLITE_MAX_LENGTH 1000000000
+#endif
+
+/*
+** This is the maximum number of
+**
+** * Columns in a table
+** * Columns in an index
+** * Columns in a view
+** * Terms in the SET clause of an UPDATE statement
+** * Terms in the result set of a SELECT statement
+** * Terms in the GROUP BY or ORDER BY clauses of a SELECT statement.
+** * Terms in the VALUES clause of an INSERT statement
+**
+** The hard upper limit here is 32676. Most database people will
+** tell you that in a well-normalized database, you usually should
+** not have more than a dozen or so columns in any table. And if
+** that is the case, there is no point in having more than a few
+** dozen values in any of the other situations described above.
+*/
+#ifndef SQLITE_MAX_COLUMN
+# define SQLITE_MAX_COLUMN 2000
+#endif
+
+/*
+** The maximum length of a single SQL statement in bytes.
+**
+** It used to be the case that setting this value to zero would
+** turn the limit off. That is no longer true. It is not possible
+** to turn this limit off.
+*/
+#ifndef SQLITE_MAX_SQL_LENGTH
+# define SQLITE_MAX_SQL_LENGTH 1000000000
+#endif
+
+/*
+** The maximum depth of an expression tree. This is limited to
+** some extent by SQLITE_MAX_SQL_LENGTH. But sometime you might
+** want to place more severe limits on the complexity of an
+** expression.
+**
+** A value of 0 used to mean that the limit was not enforced.
+** But that is no longer true. The limit is now strictly enforced
+** at all times.
+*/
+#ifndef SQLITE_MAX_EXPR_DEPTH
+# define SQLITE_MAX_EXPR_DEPTH 1000
+#endif
+
+/*
+** The maximum number of terms in a compound SELECT statement.
+** The code generator for compound SELECT statements does one
+** level of recursion for each term. A stack overflow can result
+** if the number of terms is too large. In practice, most SQL
+** never has more than 3 or 4 terms. Use a value of 0 to disable
+** any limit on the number of terms in a compount SELECT.
+*/
+#ifndef SQLITE_MAX_COMPOUND_SELECT
+# define SQLITE_MAX_COMPOUND_SELECT 500
+#endif
+
+/*
+** The maximum number of opcodes in a VDBE program.
+** Not currently enforced.
+*/
+#ifndef SQLITE_MAX_VDBE_OP
+# define SQLITE_MAX_VDBE_OP 25000
+#endif
+
+/*
+** The maximum number of arguments to an SQL function.
+*/
+#ifndef SQLITE_MAX_FUNCTION_ARG
+# define SQLITE_MAX_FUNCTION_ARG 127
+#endif
+
+/*
+** The maximum number of in-memory pages to use for the main database
+** table and for temporary tables. The SQLITE_DEFAULT_CACHE_SIZE
+*/
+#ifndef SQLITE_DEFAULT_CACHE_SIZE
+# define SQLITE_DEFAULT_CACHE_SIZE 2000
+#endif
+#ifndef SQLITE_DEFAULT_TEMP_CACHE_SIZE
+# define SQLITE_DEFAULT_TEMP_CACHE_SIZE 500
+#endif
+
+/*
+** The maximum number of attached databases. This must be between 0
+** and 30. The upper bound on 30 is because a 32-bit integer bitmap
+** is used internally to track attached databases.
+*/
+#ifndef SQLITE_MAX_ATTACHED
+# define SQLITE_MAX_ATTACHED 10
+#endif
+
+
+/*
+** The maximum value of a ?nnn wildcard that the parser will accept.
+*/
+#ifndef SQLITE_MAX_VARIABLE_NUMBER
+# define SQLITE_MAX_VARIABLE_NUMBER 999
+#endif
+
+/* Maximum page size. The upper bound on this value is 32768. This a limit
+** imposed by the necessity of storing the value in a 2-byte unsigned integer
+** and the fact that the page size must be a power of 2.
+**
+** If this limit is changed, then the compiled library is technically
+** incompatible with an SQLite library compiled with a different limit. If
+** a process operating on a database with a page-size of 65536 bytes
+** crashes, then an instance of SQLite compiled with the default page-size
+** limit will not be able to rollback the aborted transaction. This could
+** lead to database corruption.
+*/
+#ifndef SQLITE_MAX_PAGE_SIZE
+# define SQLITE_MAX_PAGE_SIZE 32768
+#endif
+
+
+/*
+** The default size of a database page.
+*/
+#ifndef SQLITE_DEFAULT_PAGE_SIZE
+# define SQLITE_DEFAULT_PAGE_SIZE 1024
+#endif
+#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE
+# undef SQLITE_DEFAULT_PAGE_SIZE
+# define SQLITE_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE
+#endif
+
+/*
+** Ordinarily, if no value is explicitly provided, SQLite creates databases
+** with page size SQLITE_DEFAULT_PAGE_SIZE. However, based on certain
+** device characteristics (sector-size and atomic write() support),
+** SQLite may choose a larger value. This constant is the maximum value
+** SQLite will choose on its own.
+*/
+#ifndef SQLITE_MAX_DEFAULT_PAGE_SIZE
+# define SQLITE_MAX_DEFAULT_PAGE_SIZE 8192
+#endif
+#if SQLITE_MAX_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE
+# undef SQLITE_MAX_DEFAULT_PAGE_SIZE
+# define SQLITE_MAX_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE
+#endif
+
+
+/*
+** Maximum number of pages in one database file.
+**
+** This is really just the default value for the max_page_count pragma.
+** This value can be lowered (or raised) at run-time using that the
+** max_page_count macro.
+*/
+#ifndef SQLITE_MAX_PAGE_COUNT
+# define SQLITE_MAX_PAGE_COUNT 1073741823
+#endif
+
+/*
+** Maximum length (in bytes) of the pattern in a LIKE or GLOB
+** operator.
+*/
+#ifndef SQLITE_MAX_LIKE_PATTERN_LENGTH
+# define SQLITE_MAX_LIKE_PATTERN_LENGTH 50000
+#endif
+
+/*
+** Maximum depth of recursion for triggers.
+**
+** A value of 1 means that a trigger program will not be able to itself
+** fire any triggers. A value of 0 means that no trigger programs at all
+** may be executed.
+*/
+#ifndef SQLITE_MAX_TRIGGER_DEPTH
+#if defined(SQLITE_SMALL_STACK)
+# define SQLITE_MAX_TRIGGER_DEPTH 10
+#else
+# define SQLITE_MAX_TRIGGER_DEPTH 1000
+#endif
+#endif
+
+/************** End of sqliteLimit.h *****************************************/
+/************** Continuing where we left off in sqliteInt.h ******************/
+
+/* Disable nuisance warnings on Borland compilers */
+#if defined(__BORLANDC__)
+#pragma warn -rch /* unreachable code */
+#pragma warn -ccc /* Condition is always true or false */
+#pragma warn -aus /* Assigned value is never used */
+#pragma warn -csu /* Comparing signed and unsigned */
+#pragma warn -spa /* Suspicious pointer arithmetic */
+#endif
+
+/* Needed for various definitions... */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE
+#endif
+
+/*
+** Include standard header files as necessary
+*/
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+
+#define SQLITE_INDEX_SAMPLES 10
+
+/*
+** This macro is used to "hide" some ugliness in casting an int
+** value to a ptr value under the MSVC 64-bit compiler. Casting
+** non 64-bit values to ptr types results in a "hard" error with
+** the MSVC 64-bit compiler which this attempts to avoid.
+**
+** A simple compiler pragma or casting sequence could not be found
+** to correct this in all situations, so this macro was introduced.
+**
+** It could be argued that the intptr_t type could be used in this
+** case, but that type is not available on all compilers, or
+** requires the #include of specific headers which differs between
+** platforms.
+**
+** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on
+** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)).
+** So we have to define the macros in different ways depending on the
+** compiler.
+*/
+#if defined(__GNUC__)
+# if defined(HAVE_STDINT_H)
+# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X))
+# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X))
+# else
+# define SQLITE_INT_TO_PTR(X) ((void*)(X))
+# define SQLITE_PTR_TO_INT(X) ((int)(X))
+# endif
+#else
+# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X])
+# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0))
+#endif
+
+
+/*
+** The SQLITE_THREADSAFE macro must be defined as either 0 or 1.
+** Older versions of SQLite used an optional THREADSAFE macro.
+** We support that for legacy
+*/
+#if !defined(SQLITE_THREADSAFE)
+#if defined(THREADSAFE)
+# define SQLITE_THREADSAFE THREADSAFE
+#else
+# define SQLITE_THREADSAFE 1
+#endif
+#endif
+
+/*
+** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1.
+** It determines whether or not the features related to
+** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can
+** be overridden at runtime using the sqlite3_config() API.
+*/
+#if !defined(SQLITE_DEFAULT_MEMSTATUS)
+# define SQLITE_DEFAULT_MEMSTATUS 1
+#endif
+
+/*
+** Exactly one of the following macros must be defined in order to
+** specify which memory allocation subsystem to use.
+**
+** SQLITE_SYSTEM_MALLOC // Use normal system malloc()
+** SQLITE_MEMDEBUG // Debugging version of system malloc()
+** SQLITE_MEMORY_SIZE // internal allocator #1
+** SQLITE_MMAP_HEAP_SIZE // internal mmap() allocator
+** SQLITE_POW2_MEMORY_SIZE // internal power-of-two allocator
+**
+** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as
+** the default.
+*/
+#if defined(SQLITE_SYSTEM_MALLOC)+defined(SQLITE_MEMDEBUG)+\
+ defined(SQLITE_MEMORY_SIZE)+defined(SQLITE_MMAP_HEAP_SIZE)+\
+ defined(SQLITE_POW2_MEMORY_SIZE)>1
+# error "At most one of the following compile-time configuration options\
+ is allows: SQLITE_SYSTEM_MALLOC, SQLITE_MEMDEBUG, SQLITE_MEMORY_SIZE,\
+ SQLITE_MMAP_HEAP_SIZE, SQLITE_POW2_MEMORY_SIZE"
+#endif
+#if defined(SQLITE_SYSTEM_MALLOC)+defined(SQLITE_MEMDEBUG)+\
+ defined(SQLITE_MEMORY_SIZE)+defined(SQLITE_MMAP_HEAP_SIZE)+\
+ defined(SQLITE_POW2_MEMORY_SIZE)==0
+# define SQLITE_SYSTEM_MALLOC 1
+#endif
+
+/*
+** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the
+** sizes of memory allocations below this value where possible.
+*/
+#if !defined(SQLITE_MALLOC_SOFT_LIMIT)
+# define SQLITE_MALLOC_SOFT_LIMIT 1024
+#endif
+
+/*
+** We need to define _XOPEN_SOURCE as follows in order to enable
+** recursive mutexes on most Unix systems. But Mac OS X is different.
+** The _XOPEN_SOURCE define causes problems for Mac OS X we are told,
+** so it is omitted there. See ticket #2673.
+**
+** Later we learn that _XOPEN_SOURCE is poorly or incorrectly
+** implemented on some systems. So we avoid defining it at all
+** if it is already defined or if it is unneeded because we are
+** not doing a threadsafe build. Ticket #2681.
+**
+** See also ticket #2741.
+*/
+#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) && SQLITE_THREADSAFE
+# define _XOPEN_SOURCE 500 /* Needed to enable pthread recursive mutexes */
+#endif
+
+/*
+** The TCL headers are only needed when compiling the TCL bindings.
+*/
+#if defined(SQLITE_TCL) || defined(TCLSH)
+# include <tcl.h>
+#endif
+
+/*
+** Many people are failing to set -DNDEBUG=1 when compiling SQLite.
+** Setting NDEBUG makes the code smaller and run faster. So the following
+** lines are added to automatically set NDEBUG unless the -DSQLITE_DEBUG=1
+** option is set. Thus NDEBUG becomes an opt-in rather than an opt-out
+** feature.
+*/
+#if !defined(NDEBUG) && !defined(SQLITE_DEBUG)
+# define NDEBUG 1
+#endif
+
+/*
+** The testcase() macro is used to aid in coverage testing. When
+** doing coverage testing, the condition inside the argument to
+** testcase() must be evaluated both true and false in order to
+** get full branch coverage. The testcase() macro is inserted
+** to help ensure adequate test coverage in places where simple
+** condition/decision coverage is inadequate. For example, testcase()
+** can be used to make sure boundary values are tested. For
+** bitmask tests, testcase() can be used to make sure each bit
+** is significant and used at least once. On switch statements
+** where multiple cases go to the same block of code, testcase()
+** can insure that all cases are evaluated.
+**
+*/
+#ifdef SQLITE_COVERAGE_TEST
+SQLITE_PRIVATE void sqlite3Coverage(int);
+# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); }
+#else
+# define testcase(X)
+#endif
+
+/*
+** The TESTONLY macro is used to enclose variable declarations or
+** other bits of code that are needed to support the arguments
+** within testcase() and assert() macros.
+*/
+#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST)
+# define TESTONLY(X) X
+#else
+# define TESTONLY(X)
+#endif
+
+/*
+** Sometimes we need a small amount of code such as a variable initialization
+** to setup for a later assert() statement. We do not want this code to
+** appear when assert() is disabled. The following macro is therefore
+** used to contain that setup code. The "VVA" acronym stands for
+** "Verification, Validation, and Accreditation". In other words, the
+** code within VVA_ONLY() will only run during verification processes.
+*/
+#ifndef NDEBUG
+# define VVA_ONLY(X) X
+#else
+# define VVA_ONLY(X)
+#endif
+
+/*
+** The ALWAYS and NEVER macros surround boolean expressions which
+** are intended to always be true or false, respectively. Such
+** expressions could be omitted from the code completely. But they
+** are included in a few cases in order to enhance the resilience
+** of SQLite to unexpected behavior - to make the code "self-healing"
+** or "ductile" rather than being "brittle" and crashing at the first
+** hint of unplanned behavior.
+**
+** In other words, ALWAYS and NEVER are added for defensive code.
+**
+** When doing coverage testing ALWAYS and NEVER are hard-coded to
+** be true and false so that the unreachable code then specify will
+** not be counted as untested code.
+*/
+#if defined(SQLITE_COVERAGE_TEST)
+# define ALWAYS(X) (1)
+# define NEVER(X) (0)
+#elif !defined(NDEBUG)
+# define ALWAYS(X) ((X)?1:(assert(0),0))
+# define NEVER(X) ((X)?(assert(0),1):0)
+#else
+# define ALWAYS(X) (X)
+# define NEVER(X) (X)
+#endif
+
+/*
+** The macro unlikely() is a hint that surrounds a boolean
+** expression that is usually false. Macro likely() surrounds
+** a boolean expression that is usually true. GCC is able to
+** use these hints to generate better code, sometimes.
+*/
+#if defined(__GNUC__) && 0
+# define likely(X) __builtin_expect((X),1)
+# define unlikely(X) __builtin_expect((X),0)
+#else
+# define likely(X) !!(X)
+# define unlikely(X) !!(X)
+#endif
+
+/************** Include sqlite3.h in the middle of sqliteInt.h ***************/
+/************** Begin file sqlite3.h *****************************************/
+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** This header file defines the interface that the SQLite library
+** presents to client programs. If a C-function, structure, datatype,
+** or constant definition does not appear in this file, then it is
+** not a published API of SQLite, is subject to change without
+** notice, and should not be referenced by programs that use SQLite.
+**
+** Some of the definitions that are in this file are marked as
+** "experimental". Experimental interfaces are normally new
+** features recently added to SQLite. We do not anticipate changes
+** to experimental interfaces but reserve the right to make minor changes
+** if experience from use "in the wild" suggest such changes are prudent.
+**
+** The official C-language API documentation for SQLite is derived
+** from comments in this file. This file is the authoritative source
+** on how SQLite interfaces are suppose to operate.
+**
+** The name of this file under configuration management is "sqlite.h.in".
+** The makefile makes some minor changes to this file (such as inserting
+** the version number) and changes its name to "sqlite3.h" as
+** part of the build process.
+*/
+#ifndef _SQLITE3_H_
+#define _SQLITE3_H_
+#include <stdarg.h> /* Needed for the definition of va_list */
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#if 0
+extern "C" {
+#endif
+
+
+/*
+** Add the ability to override 'extern'
+*/
+#ifndef SQLITE_EXTERN
+# define SQLITE_EXTERN extern
+#endif
+
+#ifndef SQLITE_API
+# define SQLITE_API
+#endif
+
+
+/*
+** These no-op macros are used in front of interfaces to mark those
+** interfaces as either deprecated or experimental. New applications
+** should not use deprecated interfaces - they are support for backwards
+** compatibility only. Application writers should be aware that
+** experimental interfaces are subject to change in point releases.
+**
+** These macros used to resolve to various kinds of compiler magic that
+** would generate warning messages when they were used. But that
+** compiler magic ended up generating such a flurry of bug reports
+** that we have taken it all out and gone back to using simple
+** noop macros.
+*/
+#define SQLITE_DEPRECATED
+#define SQLITE_EXPERIMENTAL
+
+/*
+** Ensure these symbols were not defined by some previous header file.
+*/
+#ifdef SQLITE_VERSION
+# undef SQLITE_VERSION
+#endif
+#ifdef SQLITE_VERSION_NUMBER
+# undef SQLITE_VERSION_NUMBER
+#endif
+
+/*
+** CAPI3REF: Compile-Time Library Version Numbers {H10010} <S60100>
+**
+** The SQLITE_VERSION and SQLITE_VERSION_NUMBER #defines in
+** the sqlite3.h file specify the version of SQLite with which
+** that header file is associated.
+**
+** The "version" of SQLite is a string of the form "W.X.Y" or "W.X.Y.Z".
+** The W value is major version number and is always 3 in SQLite3.
+** The W value only changes when backwards compatibility is
+** broken and we intend to never break backwards compatibility.
+** The X value is the minor version number and only changes when
+** there are major feature enhancements that are forwards compatible
+** but not backwards compatible.
+** The Y value is the release number and is incremented with
+** each release but resets back to 0 whenever X is incremented.
+** The Z value only appears on branch releases.
+**
+** The SQLITE_VERSION_NUMBER is an integer that is computed as
+** follows:
+**
+** <blockquote><pre>
+** SQLITE_VERSION_NUMBER = W*1000000 + X*1000 + Y
+** </pre></blockquote>
+**
+** Since version 3.6.18, SQLite source code has been stored in the
+** <a href="http://www.fossil-scm.org/">fossil configuration management
+** system</a>. The SQLITE_SOURCE_ID
+** macro is a string which identifies a particular check-in of SQLite
+** within its configuration management system. The string contains the
+** date and time of the check-in (UTC) and an SHA1 hash of the entire
+** source tree.
+**
+** See also: [sqlite3_libversion()],
+** [sqlite3_libversion_number()], [sqlite3_sourceid()],
+** [sqlite_version()] and [sqlite_source_id()].
+**
+** Requirements: [H10011] [H10014]
+*/
+#define SQLITE_VERSION "3.6.20"
+#define SQLITE_VERSION_NUMBER 3006020
+#define SQLITE_SOURCE_ID "2009-11-04 13:30:02 eb7a544fe49d1626bacecfe53ddc03fe082e3243"
+
+/*
+** CAPI3REF: Run-Time Library Version Numbers {H10020} <S60100>
+** KEYWORDS: sqlite3_version
+**
+** These interfaces provide the same information as the [SQLITE_VERSION],
+** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] #defines in the header,
+** but are associated with the library instead of the header file. Cautious
+** programmers might include assert() statements in their application to
+** verify that values returned by these interfaces match the macros in
+** the header, and thus insure that the application is
+** compiled with matching library and header files.
+**
+** <blockquote><pre>
+** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
+** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
+** assert( strcmp(sqlite3_libversion,SQLITE_VERSION)==0 );
+** </pre></blockquote>
+**
+** The sqlite3_libversion() function returns the same information as is
+** in the sqlite3_version[] string constant. The function is provided
+** for use in DLLs since DLL users usually do not have direct access to string
+** constants within the DLL. Similarly, the sqlite3_sourceid() function
+** returns the same information as is in the [SQLITE_SOURCE_ID] #define of
+** the header file.
+**
+** See also: [sqlite_version()] and [sqlite_source_id()].
+**
+** Requirements: [H10021] [H10022] [H10023]
+*/
+SQLITE_API const char sqlite3_version[] = SQLITE_VERSION;
+SQLITE_API const char *sqlite3_libversion(void);
+SQLITE_API const char *sqlite3_sourceid(void);
+SQLITE_API int sqlite3_libversion_number(void);
+
+/*
+** CAPI3REF: Test To See If The Library Is Threadsafe {H10100} <S60100>
+**
+** SQLite can be compiled with or without mutexes. When
+** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
+** are enabled and SQLite is threadsafe. When the
+** [SQLITE_THREADSAFE] macro is 0,
+** the mutexes are omitted. Without the mutexes, it is not safe
+** to use SQLite concurrently from more than one thread.
+**
+** Enabling mutexes incurs a measurable performance penalty.
+** So if speed is of utmost importance, it makes sense to disable
+** the mutexes. But for maximum safety, mutexes should be enabled.
+** The default behavior is for mutexes to be enabled.
+**
+** This interface can be used by an application to make sure that the
+** version of SQLite that it is linking against was compiled with
+** the desired setting of the [SQLITE_THREADSAFE] macro.
+**
+** This interface only reports on the compile-time mutex setting
+** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with
+** SQLITE_THREADSAFE=1 then mutexes are enabled by default but
+** can be fully or partially disabled using a call to [sqlite3_config()]
+** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
+** or [SQLITE_CONFIG_MUTEX]. The return value of this function shows
+** only the default compile-time setting, not any run-time changes
+** to that setting.
+**
+** See the [threading mode] documentation for additional information.
+**
+** Requirements: [H10101] [H10102]
+*/
+SQLITE_API int sqlite3_threadsafe(void);
+
+/*
+** CAPI3REF: Database Connection Handle {H12000} <S40200>
+** KEYWORDS: {database connection} {database connections}
+**
+** Each open SQLite database is represented by a pointer to an instance of
+** the opaque structure named "sqlite3". It is useful to think of an sqlite3
+** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and
+** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()]
+** is its destructor. There are many other interfaces (such as
+** [sqlite3_prepare_v2()], [sqlite3_create_function()], and
+** [sqlite3_busy_timeout()] to name but three) that are methods on an
+** sqlite3 object.
+*/
+typedef struct sqlite3 sqlite3;
+
+/*
+** CAPI3REF: 64-Bit Integer Types {H10200} <S10110>
+** KEYWORDS: sqlite_int64 sqlite_uint64
+**
+** Because there is no cross-platform way to specify 64-bit integer types
+** SQLite includes typedefs for 64-bit signed and unsigned integers.
+**
+** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions.
+** The sqlite_int64 and sqlite_uint64 types are supported for backwards
+** compatibility only.
+**
+** Requirements: [H10201] [H10202]
+*/
+#ifdef SQLITE_INT64_TYPE
+ typedef SQLITE_INT64_TYPE sqlite_int64;
+ typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+#elif defined(_MSC_VER) || defined(__BORLANDC__)
+ typedef __int64 sqlite_int64;
+ typedef unsigned __int64 sqlite_uint64;
+#else
+ typedef long long int sqlite_int64;
+ typedef unsigned long long int sqlite_uint64;
+#endif
+typedef sqlite_int64 sqlite3_int64;
+typedef sqlite_uint64 sqlite3_uint64;
+
+/*
+** If compiling for a processor that lacks floating point support,
+** substitute integer for floating-point.
+*/
+#ifdef SQLITE_OMIT_FLOATING_POINT
+# define double sqlite3_int64
+#endif
+
+/*
+** CAPI3REF: Closing A Database Connection {H12010} <S30100><S40200>
+**
+** This routine is the destructor for the [sqlite3] object.
+**
+** Applications must [sqlite3_finalize | finalize] all [prepared statements]
+** and [sqlite3_blob_close | close] all [BLOB handles] associated with
+** the [sqlite3] object prior to attempting to close the object.
+**
+** If [sqlite3_close()] is invoked while a transaction is open,
+** the transaction is automatically rolled back.
+**
+** The C parameter to [sqlite3_close(C)] must be either a NULL
+** pointer or an [sqlite3] object pointer obtained
+** from [sqlite3_open()], [sqlite3_open16()], or
+** [sqlite3_open_v2()], and not previously closed.
+**
+** Requirements:
+** [H12011] [H12012] [H12013] [H12014] [H12015] [H12019]
+*/
+SQLITE_API int sqlite3_close(sqlite3 *);
+
+/*
+** The type for a callback function.
+** This is legacy and deprecated. It is included for historical
+** compatibility and is not documented.
+*/
+typedef int (*sqlite3_callback)(void*,int,char**, char**);
+
+/*
+** CAPI3REF: One-Step Query Execution Interface {H12100} <S10000>
+**
+** The sqlite3_exec() interface is a convenient way of running one or more
+** SQL statements without having to write a lot of C code. The UTF-8 encoded
+** SQL statements are passed in as the second parameter to sqlite3_exec().
+** The statements are evaluated one by one until either an error or
+** an interrupt is encountered, or until they are all done. The 3rd parameter
+** is an optional callback that is invoked once for each row of any query
+** results produced by the SQL statements. The 5th parameter tells where
+** to write any error messages.
+**
+** The error message passed back through the 5th parameter is held
+** in memory obtained from [sqlite3_malloc()]. To avoid a memory leak,
+** the calling application should call [sqlite3_free()] on any error
+** message returned through the 5th parameter when it has finished using
+** the error message.
+**
+** If the SQL statement in the 2nd parameter is NULL or an empty string
+** or a string containing only whitespace and comments, then no SQL
+** statements are evaluated and the database is not changed.
+**
+** The sqlite3_exec() interface is implemented in terms of
+** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
+** The sqlite3_exec() routine does nothing to the database that cannot be done
+** by [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
+**
+** The first parameter to [sqlite3_exec()] must be an valid and open
+** [database connection].
+**
+** The database connection must not be closed while
+** [sqlite3_exec()] is running.
+**
+** The calling function should use [sqlite3_free()] to free
+** the memory that *errmsg is left pointing at once the error
+** message is no longer needed.
+**
+** The SQL statement text in the 2nd parameter to [sqlite3_exec()]
+** must remain unchanged while [sqlite3_exec()] is running.
+**
+** Requirements:
+** [H12101] [H12102] [H12104] [H12105] [H12107] [H12110] [H12113] [H12116]
+** [H12119] [H12122] [H12125] [H12131] [H12134] [H12137] [H12138]
+*/
+SQLITE_API int sqlite3_exec(
+ sqlite3*, /* An open database */
+ const char *sql, /* SQL to be evaluated */
+ int (*callback)(void*,int,char**,char**), /* Callback function */
+ void *, /* 1st argument to callback */
+ char **errmsg /* Error msg written here */
+);
+
+/*
+** CAPI3REF: Result Codes {H10210} <S10700>
+** KEYWORDS: SQLITE_OK {error code} {error codes}
+** KEYWORDS: {result code} {result codes}
+**
+** Many SQLite functions return an integer result code from the set shown
+** here in order to indicates success or failure.
+**
+** New error codes may be added in future versions of SQLite.
+**
+** See also: [SQLITE_IOERR_READ | extended result codes]
+*/
+#define SQLITE_OK 0 /* Successful result */
+/* beginning-of-error-codes */
+#define SQLITE_ERROR 1 /* SQL error or missing database */
+#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */
+#define SQLITE_PERM 3 /* Access permission denied */
+#define SQLITE_ABORT 4 /* Callback routine requested an abort */
+#define SQLITE_BUSY 5 /* The database file is locked */
+#define SQLITE_LOCKED 6 /* A table in the database is locked */
+#define SQLITE_NOMEM 7 /* A malloc() failed */
+#define SQLITE_READONLY 8 /* Attempt to write a readonly database */
+#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/
+#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */
+#define SQLITE_CORRUPT 11 /* The database disk image is malformed */
+#define SQLITE_NOTFOUND 12 /* NOT USED. Table or record not found */
+#define SQLITE_FULL 13 /* Insertion failed because database is full */
+#define SQLITE_CANTOPEN 14 /* Unable to open the database file */
+#define SQLITE_PROTOCOL 15 /* NOT USED. Database lock protocol error */
+#define SQLITE_EMPTY 16 /* Database is empty */
+#define SQLITE_SCHEMA 17 /* The database schema changed */
+#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */
+#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */
+#define SQLITE_MISMATCH 20 /* Data type mismatch */
+#define SQLITE_MISUSE 21 /* Library used incorrectly */
+#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */
+#define SQLITE_AUTH 23 /* Authorization denied */
+#define SQLITE_FORMAT 24 /* Auxiliary database format error */
+#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */
+#define SQLITE_NOTADB 26 /* File opened that is not a database file */
+#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */
+#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */
+/* end-of-error-codes */
+
+/*
+** CAPI3REF: Extended Result Codes {H10220} <S10700>
+** KEYWORDS: {extended error code} {extended error codes}
+** KEYWORDS: {extended result code} {extended result codes}
+**
+** In its default configuration, SQLite API routines return one of 26 integer
+** [SQLITE_OK | result codes]. However, experience has shown that many of
+** these result codes are too coarse-grained. They do not provide as
+** much information about problems as programmers might like. In an effort to
+** address this, newer versions of SQLite (version 3.3.8 and later) include
+** support for additional result codes that provide more detailed information
+** about errors. The extended result codes are enabled or disabled
+** on a per database connection basis using the
+** [sqlite3_extended_result_codes()] API.
+**
+** Some of the available extended result codes are listed here.
+** One may expect the number of extended result codes will be expand
+** over time. Software that uses extended result codes should expect
+** to see new result codes in future releases of SQLite.
+**
+** The SQLITE_OK result code will never be extended. It will always
+** be exactly zero.
+*/
+#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8))
+#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8))
+#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8))
+#define SQLITE_IOERR_FSYNC (SQLITE_IOERR | (4<<8))
+#define SQLITE_IOERR_DIR_FSYNC (SQLITE_IOERR | (5<<8))
+#define SQLITE_IOERR_TRUNCATE (SQLITE_IOERR | (6<<8))
+#define SQLITE_IOERR_FSTAT (SQLITE_IOERR | (7<<8))
+#define SQLITE_IOERR_UNLOCK (SQLITE_IOERR | (8<<8))
+#define SQLITE_IOERR_RDLOCK (SQLITE_IOERR | (9<<8))
+#define SQLITE_IOERR_DELETE (SQLITE_IOERR | (10<<8))
+#define SQLITE_IOERR_BLOCKED (SQLITE_IOERR | (11<<8))
+#define SQLITE_IOERR_NOMEM (SQLITE_IOERR | (12<<8))
+#define SQLITE_IOERR_ACCESS (SQLITE_IOERR | (13<<8))
+#define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8))
+#define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8))
+#define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8))
+#define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8))
+#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8) )
+
+/*
+** CAPI3REF: Flags For File Open Operations {H10230} <H11120> <H12700>
+**
+** These bit values are intended for use in the
+** 3rd parameter to the [sqlite3_open_v2()] interface and
+** in the 4th parameter to the xOpen method of the
+** [sqlite3_vfs] object.
+*/
+#define SQLITE_OPEN_READONLY 0x00000001 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_READWRITE 0x00000002 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_CREATE 0x00000004 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_DELETEONCLOSE 0x00000008 /* VFS only */
+#define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */
+#define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */
+#define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */
+#define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */
+#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800 /* VFS only */
+#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000 /* VFS only */
+#define SQLITE_OPEN_SUBJOURNAL 0x00002000 /* VFS only */
+#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000 /* VFS only */
+#define SQLITE_OPEN_NOMUTEX 0x00008000 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_FULLMUTEX 0x00010000 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_SHAREDCACHE 0x00020000 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_PRIVATECACHE 0x00040000 /* Ok for sqlite3_open_v2() */
+
+/*
+** CAPI3REF: Device Characteristics {H10240} <H11120>
+**
+** The xDeviceCapabilities method of the [sqlite3_io_methods]
+** object returns an integer which is a vector of the these
+** bit values expressing I/O characteristics of the mass storage
+** device that holds the file that the [sqlite3_io_methods]
+** refers to.
+**
+** The SQLITE_IOCAP_ATOMIC property means that all writes of
+** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values
+** mean that writes of blocks that are nnn bytes in size and
+** are aligned to an address which is an integer multiple of
+** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means
+** that when data is appended to a file, the data is appended
+** first then the size of the file is extended, never the other
+** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
+** information is written to disk in the same order as calls
+** to xWrite().
+*/
+#define SQLITE_IOCAP_ATOMIC 0x00000001
+#define SQLITE_IOCAP_ATOMIC512 0x00000002
+#define SQLITE_IOCAP_ATOMIC1K 0x00000004
+#define SQLITE_IOCAP_ATOMIC2K 0x00000008
+#define SQLITE_IOCAP_ATOMIC4K 0x00000010
+#define SQLITE_IOCAP_ATOMIC8K 0x00000020
+#define SQLITE_IOCAP_ATOMIC16K 0x00000040
+#define SQLITE_IOCAP_ATOMIC32K 0x00000080
+#define SQLITE_IOCAP_ATOMIC64K 0x00000100
+#define SQLITE_IOCAP_SAFE_APPEND 0x00000200
+#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
+
+/*
+** CAPI3REF: File Locking Levels {H10250} <H11120> <H11310>
+**
+** SQLite uses one of these integer values as the second
+** argument to calls it makes to the xLock() and xUnlock() methods
+** of an [sqlite3_io_methods] object.
+*/
+#define SQLITE_LOCK_NONE 0
+#define SQLITE_LOCK_SHARED 1
+#define SQLITE_LOCK_RESERVED 2
+#define SQLITE_LOCK_PENDING 3
+#define SQLITE_LOCK_EXCLUSIVE 4
+
+/*
+** CAPI3REF: Synchronization Type Flags {H10260} <H11120>
+**
+** When SQLite invokes the xSync() method of an
+** [sqlite3_io_methods] object it uses a combination of
+** these integer values as the second argument.
+**
+** When the SQLITE_SYNC_DATAONLY flag is used, it means that the
+** sync operation only needs to flush data to mass storage. Inode
+** information need not be flushed. If the lower four bits of the flag
+** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics.
+** If the lower four bits equal SQLITE_SYNC_FULL, that means
+** to use Mac OS X style fullsync instead of fsync().
+*/
+#define SQLITE_SYNC_NORMAL 0x00002
+#define SQLITE_SYNC_FULL 0x00003
+#define SQLITE_SYNC_DATAONLY 0x00010
+
+/*
+** CAPI3REF: OS Interface Open File Handle {H11110} <S20110>
+**
+** An [sqlite3_file] object represents an open file in the
+** [sqlite3_vfs | OS interface layer]. Individual OS interface
+** implementations will
+** want to subclass this object by appending additional fields
+** for their own use. The pMethods entry is a pointer to an
+** [sqlite3_io_methods] object that defines methods for performing
+** I/O operations on the open file.
+*/
+typedef struct sqlite3_file sqlite3_file;
+struct sqlite3_file {
+ const struct sqlite3_io_methods *pMethods; /* Methods for an open file */
+};
+
+/*
+** CAPI3REF: OS Interface File Virtual Methods Object {H11120} <S20110>
+**
+** Every file opened by the [sqlite3_vfs] xOpen method populates an
+** [sqlite3_file] object (or, more commonly, a subclass of the
+** [sqlite3_file] object) with a pointer to an instance of this object.
+** This object defines the methods used to perform various operations
+** against the open file represented by the [sqlite3_file] object.
+**
+** If the xOpen method sets the sqlite3_file.pMethods element
+** to a non-NULL pointer, then the sqlite3_io_methods.xClose method
+** may be invoked even if the xOpen reported that it failed. The
+** only way to prevent a call to xClose following a failed xOpen
+** is for the xOpen to set the sqlite3_file.pMethods element to NULL.
+**
+** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or
+** [SQLITE_SYNC_FULL]. The first choice is the normal fsync().
+** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY]
+** flag may be ORed in to indicate that only the data of the file
+** and not its inode needs to be synced.
+**
+** The integer values to xLock() and xUnlock() are one of
+** <ul>
+** <li> [SQLITE_LOCK_NONE],
+** <li> [SQLITE_LOCK_SHARED],
+** <li> [SQLITE_LOCK_RESERVED],
+** <li> [SQLITE_LOCK_PENDING], or
+** <li> [SQLITE_LOCK_EXCLUSIVE].
+** </ul>
+** xLock() increases the lock. xUnlock() decreases the lock.
+** The xCheckReservedLock() method checks whether any database connection,
+** either in this process or in some other process, is holding a RESERVED,
+** PENDING, or EXCLUSIVE lock on the file. It returns true
+** if such a lock exists and false otherwise.
+**
+** The xFileControl() method is a generic interface that allows custom
+** VFS implementations to directly control an open file using the
+** [sqlite3_file_control()] interface. The second "op" argument is an
+** integer opcode. The third argument is a generic pointer intended to
+** point to a structure that may contain arguments or space in which to
+** write return values. Potential uses for xFileControl() might be
+** functions to enable blocking locks with timeouts, to change the
+** locking strategy (for example to use dot-file locks), to inquire
+** about the status of a lock, or to break stale locks. The SQLite
+** core reserves all opcodes less than 100 for its own use.
+** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available.
+** Applications that define a custom xFileControl method should use opcodes
+** greater than 100 to avoid conflicts.
+**
+** The xSectorSize() method returns the sector size of the
+** device that underlies the file. The sector size is the
+** minimum write that can be performed without disturbing
+** other bytes in the file. The xDeviceCharacteristics()
+** method returns a bit vector describing behaviors of the
+** underlying device:
+**
+** <ul>
+** <li> [SQLITE_IOCAP_ATOMIC]
+** <li> [SQLITE_IOCAP_ATOMIC512]
+** <li> [SQLITE_IOCAP_ATOMIC1K]
+** <li> [SQLITE_IOCAP_ATOMIC2K]
+** <li> [SQLITE_IOCAP_ATOMIC4K]
+** <li> [SQLITE_IOCAP_ATOMIC8K]
+** <li> [SQLITE_IOCAP_ATOMIC16K]
+** <li> [SQLITE_IOCAP_ATOMIC32K]
+** <li> [SQLITE_IOCAP_ATOMIC64K]
+** <li> [SQLITE_IOCAP_SAFE_APPEND]
+** <li> [SQLITE_IOCAP_SEQUENTIAL]
+** </ul>
+**
+** The SQLITE_IOCAP_ATOMIC property means that all writes of
+** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values
+** mean that writes of blocks that are nnn bytes in size and
+** are aligned to an address which is an integer multiple of
+** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means
+** that when data is appended to a file, the data is appended
+** first then the size of the file is extended, never the other
+** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
+** information is written to disk in the same order as calls
+** to xWrite().
+**
+** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill
+** in the unread portions of the buffer with zeros. A VFS that
+** fails to zero-fill short reads might seem to work. However,
+** failure to zero-fill short reads will eventually lead to
+** database corruption.
+*/
+typedef struct sqlite3_io_methods sqlite3_io_methods;
+struct sqlite3_io_methods {
+ int iVersion;
+ int (*xClose)(sqlite3_file*);
+ int (*xRead)(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
+ int (*xWrite)(sqlite3_file*, const void*, int iAmt, sqlite3_int64 iOfst);
+ int (*xTruncate)(sqlite3_file*, sqlite3_int64 size);
+ int (*xSync)(sqlite3_file*, int flags);
+ int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize);
+ int (*xLock)(sqlite3_file*, int);
+ int (*xUnlock)(sqlite3_file*, int);
+ int (*xCheckReservedLock)(sqlite3_file*, int *pResOut);
+ int (*xFileControl)(sqlite3_file*, int op, void *pArg);
+ int (*xSectorSize)(sqlite3_file*);
+ int (*xDeviceCharacteristics)(sqlite3_file*);
+ /* Additional methods may be added in future releases */
+};
+
+/*
+** CAPI3REF: Standard File Control Opcodes {H11310} <S30800>
+**
+** These integer constants are opcodes for the xFileControl method
+** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
+** interface.
+**
+** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This
+** opcode causes the xFileControl method to write the current state of
+** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
+** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
+** into an integer that the pArg argument points to. This capability
+** is used during testing and only needs to be supported when SQLITE_TEST
+** is defined.
+*/
+#define SQLITE_FCNTL_LOCKSTATE 1
+#define SQLITE_GET_LOCKPROXYFILE 2
+#define SQLITE_SET_LOCKPROXYFILE 3
+#define SQLITE_LAST_ERRNO 4
+
+/*
+** CAPI3REF: Mutex Handle {H17110} <S20130>
+**
+** The mutex module within SQLite defines [sqlite3_mutex] to be an
+** abstract type for a mutex object. The SQLite core never looks
+** at the internal representation of an [sqlite3_mutex]. It only
+** deals with pointers to the [sqlite3_mutex] object.
+**
+** Mutexes are created using [sqlite3_mutex_alloc()].
+*/
+typedef struct sqlite3_mutex sqlite3_mutex;
+
+/*
+** CAPI3REF: OS Interface Object {H11140} <S20100>
+**
+** An instance of the sqlite3_vfs object defines the interface between
+** the SQLite core and the underlying operating system. The "vfs"
+** in the name of the object stands for "virtual file system".
+**
+** The value of the iVersion field is initially 1 but may be larger in
+** future versions of SQLite. Additional fields may be appended to this
+** object when the iVersion value is increased. Note that the structure
+** of the sqlite3_vfs object changes in the transaction between
+** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not
+** modified.
+**
+** The szOsFile field is the size of the subclassed [sqlite3_file]
+** structure used by this VFS. mxPathname is the maximum length of
+** a pathname in this VFS.
+**
+** Registered sqlite3_vfs objects are kept on a linked list formed by
+** the pNext pointer. The [sqlite3_vfs_register()]
+** and [sqlite3_vfs_unregister()] interfaces manage this list
+** in a thread-safe way. The [sqlite3_vfs_find()] interface
+** searches the list. Neither the application code nor the VFS
+** implementation should use the pNext pointer.
+**
+** The pNext field is the only field in the sqlite3_vfs
+** structure that SQLite will ever modify. SQLite will only access
+** or modify this field while holding a particular static mutex.
+** The application should never modify anything within the sqlite3_vfs
+** object once the object has been registered.
+**
+** The zName field holds the name of the VFS module. The name must
+** be unique across all VFS modules.
+**
+** SQLite will guarantee that the zFilename parameter to xOpen
+** is either a NULL pointer or string obtained
+** from xFullPathname(). SQLite further guarantees that
+** the string will be valid and unchanged until xClose() is
+** called. Because of the previous sentence,
+** the [sqlite3_file] can safely store a pointer to the
+** filename if it needs to remember the filename for some reason.
+** If the zFilename parameter is xOpen is a NULL pointer then xOpen
+** must invent its own temporary name for the file. Whenever the
+** xFilename parameter is NULL it will also be the case that the
+** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
+**
+** The flags argument to xOpen() includes all bits set in
+** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()]
+** or [sqlite3_open16()] is used, then flags includes at least
+** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE].
+** If xOpen() opens a file read-only then it sets *pOutFlags to
+** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set.
+**
+** SQLite will also add one of the following flags to the xOpen()
+** call, depending on the object being opened:
+**
+** <ul>
+** <li> [SQLITE_OPEN_MAIN_DB]
+** <li> [SQLITE_OPEN_MAIN_JOURNAL]
+** <li> [SQLITE_OPEN_TEMP_DB]
+** <li> [SQLITE_OPEN_TEMP_JOURNAL]
+** <li> [SQLITE_OPEN_TRANSIENT_DB]
+** <li> [SQLITE_OPEN_SUBJOURNAL]
+** <li> [SQLITE_OPEN_MASTER_JOURNAL]
+** </ul>
+**
+** The file I/O implementation can use the object type flags to
+** change the way it deals with files. For example, an application
+** that does not care about crash recovery or rollback might make
+** the open of a journal file a no-op. Writes to this journal would
+** also be no-ops, and any attempt to read the journal would return
+** SQLITE_IOERR. Or the implementation might recognize that a database
+** file will be doing page-aligned sector reads and writes in a random
+** order and set up its I/O subsystem accordingly.
+**
+** SQLite might also add one of the following flags to the xOpen method:
+**
+** <ul>
+** <li> [SQLITE_OPEN_DELETEONCLOSE]
+** <li> [SQLITE_OPEN_EXCLUSIVE]
+** </ul>
+**
+** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
+** deleted when it is closed. The [SQLITE_OPEN_DELETEONCLOSE]
+** will be set for TEMP databases, journals and for subjournals.
+**
+** The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction
+** with the [SQLITE_OPEN_CREATE] flag, which are both directly
+** analogous to the O_EXCL and O_CREAT flags of the POSIX open()
+** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the
+** SQLITE_OPEN_CREATE, is used to indicate that file should always
+** be created, and that it is an error if it already exists.
+** It is <i>not</i> used to indicate the file should be opened
+** for exclusive access.
+**
+** At least szOsFile bytes of memory are allocated by SQLite
+** to hold the [sqlite3_file] structure passed as the third
+** argument to xOpen. The xOpen method does not have to
+** allocate the structure; it should just fill it in. Note that
+** the xOpen method must set the sqlite3_file.pMethods to either
+** a valid [sqlite3_io_methods] object or to NULL. xOpen must do
+** this even if the open fails. SQLite expects that the sqlite3_file.pMethods
+** element will be valid after xOpen returns regardless of the success
+** or failure of the xOpen call.
+**
+** The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
+** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to
+** test whether a file is readable and writable, or [SQLITE_ACCESS_READ]
+** to test whether a file is at least readable. The file can be a
+** directory.
+**
+** SQLite will always allocate at least mxPathname+1 bytes for the
+** output buffer xFullPathname. The exact size of the output buffer
+** is also passed as a parameter to both methods. If the output buffer
+** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is
+** handled as a fatal error by SQLite, vfs implementations should endeavor
+** to prevent this by setting mxPathname to a sufficiently large value.
+**
+** The xRandomness(), xSleep(), and xCurrentTime() interfaces
+** are not strictly a part of the filesystem, but they are
+** included in the VFS structure for completeness.
+** The xRandomness() function attempts to return nBytes bytes
+** of good-quality randomness into zOut. The return value is
+** the actual number of bytes of randomness obtained.
+** The xSleep() method causes the calling thread to sleep for at
+** least the number of microseconds given. The xCurrentTime()
+** method returns a Julian Day Number for the current date and time.
+**
+*/
+typedef struct sqlite3_vfs sqlite3_vfs;
+struct sqlite3_vfs {
+ int iVersion; /* Structure version number */
+ int szOsFile; /* Size of subclassed sqlite3_file */
+ int mxPathname; /* Maximum file pathname length */
+ sqlite3_vfs *pNext; /* Next registered VFS */
+ const char *zName; /* Name of this virtual file system */
+ void *pAppData; /* Pointer to application-specific data */
+ int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*,
+ int flags, int *pOutFlags);
+ int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir);
+ int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut);
+ int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut);
+ void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename);
+ void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg);
+ void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void);
+ void (*xDlClose)(sqlite3_vfs*, void*);
+ int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut);
+ int (*xSleep)(sqlite3_vfs*, int microseconds);
+ int (*xCurrentTime)(sqlite3_vfs*, double*);
+ int (*xGetLastError)(sqlite3_vfs*, int, char *);
+ /* New fields may be appended in figure versions. The iVersion
+ ** value will increment whenever this happens. */
+};
+
+/*
+** CAPI3REF: Flags for the xAccess VFS method {H11190} <H11140>
+**
+** These integer constants can be used as the third parameter to
+** the xAccess method of an [sqlite3_vfs] object. {END} They determine
+** what kind of permissions the xAccess method is looking for.
+** With SQLITE_ACCESS_EXISTS, the xAccess method
+** simply checks whether the file exists.
+** With SQLITE_ACCESS_READWRITE, the xAccess method
+** checks whether the file is both readable and writable.
+** With SQLITE_ACCESS_READ, the xAccess method
+** checks whether the file is readable.
+*/
+#define SQLITE_ACCESS_EXISTS 0
+#define SQLITE_ACCESS_READWRITE 1
+#define SQLITE_ACCESS_READ 2
+
+/*
+** CAPI3REF: Initialize The SQLite Library {H10130} <S20000><S30100>
+**
+** The sqlite3_initialize() routine initializes the
+** SQLite library. The sqlite3_shutdown() routine
+** deallocates any resources that were allocated by sqlite3_initialize().
+** This routines are designed to aid in process initialization and
+** shutdown on embedded systems. Workstation applications using
+** SQLite normally do not need to invoke either of these routines.
+**
+** A call to sqlite3_initialize() is an "effective" call if it is
+** the first time sqlite3_initialize() is invoked during the lifetime of
+** the process, or if it is the first time sqlite3_initialize() is invoked
+** following a call to sqlite3_shutdown(). Only an effective call
+** of sqlite3_initialize() does any initialization. All other calls
+** are harmless no-ops.
+**
+** A call to sqlite3_shutdown() is an "effective" call if it is the first
+** call to sqlite3_shutdown() since the last sqlite3_initialize(). Only
+** an effective call to sqlite3_shutdown() does any deinitialization.
+** All other valid calls to sqlite3_shutdown() are harmless no-ops.
+**
+** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown()
+** is not. The sqlite3_shutdown() interface must only be called from a
+** single thread. All open [database connections] must be closed and all
+** other SQLite resources must be deallocated prior to invoking
+** sqlite3_shutdown().
+**
+** Among other things, sqlite3_initialize() will invoke
+** sqlite3_os_init(). Similarly, sqlite3_shutdown()
+** will invoke sqlite3_os_end().
+**
+** The sqlite3_initialize() routine returns [SQLITE_OK] on success.
+** If for some reason, sqlite3_initialize() is unable to initialize
+** the library (perhaps it is unable to allocate a needed resource such
+** as a mutex) it returns an [error code] other than [SQLITE_OK].
+**
+** The sqlite3_initialize() routine is called internally by many other
+** SQLite interfaces so that an application usually does not need to
+** invoke sqlite3_initialize() directly. For example, [sqlite3_open()]
+** calls sqlite3_initialize() so the SQLite library will be automatically
+** initialized when [sqlite3_open()] is called if it has not be initialized
+** already. However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT]
+** compile-time option, then the automatic calls to sqlite3_initialize()
+** are omitted and the application must call sqlite3_initialize() directly
+** prior to using any other SQLite interface. For maximum portability,
+** it is recommended that applications always invoke sqlite3_initialize()
+** directly prior to using any other SQLite interface. Future releases
+** of SQLite may require this. In other words, the behavior exhibited
+** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the
+** default behavior in some future release of SQLite.
+**
+** The sqlite3_os_init() routine does operating-system specific
+** initialization of the SQLite library. The sqlite3_os_end()
+** routine undoes the effect of sqlite3_os_init(). Typical tasks
+** performed by these routines include allocation or deallocation
+** of static resources, initialization of global variables,
+** setting up a default [sqlite3_vfs] module, or setting up
+** a default configuration using [sqlite3_config()].
+**
+** The application should never invoke either sqlite3_os_init()
+** or sqlite3_os_end() directly. The application should only invoke
+** sqlite3_initialize() and sqlite3_shutdown(). The sqlite3_os_init()
+** interface is called automatically by sqlite3_initialize() and
+** sqlite3_os_end() is called by sqlite3_shutdown(). Appropriate
+** implementations for sqlite3_os_init() and sqlite3_os_end()
+** are built into SQLite when it is compiled for Unix, Windows, or OS/2.
+** When [custom builds | built for other platforms]
+** (using the [SQLITE_OS_OTHER=1] compile-time
+** option) the application must supply a suitable implementation for
+** sqlite3_os_init() and sqlite3_os_end(). An application-supplied
+** implementation of sqlite3_os_init() or sqlite3_os_end()
+** must return [SQLITE_OK] on success and some other [error code] upon
+** failure.
+*/
+SQLITE_API int sqlite3_initialize(void);
+SQLITE_API int sqlite3_shutdown(void);
+SQLITE_API int sqlite3_os_init(void);
+SQLITE_API int sqlite3_os_end(void);
+
+/*
+** CAPI3REF: Configuring The SQLite Library {H14100} <S20000><S30200>
+** EXPERIMENTAL
+**
+** The sqlite3_config() interface is used to make global configuration
+** changes to SQLite in order to tune SQLite to the specific needs of
+** the application. The default configuration is recommended for most
+** applications and so this routine is usually not necessary. It is
+** provided to support rare applications with unusual needs.
+**
+** The sqlite3_config() interface is not threadsafe. The application
+** must insure that no other SQLite interfaces are invoked by other
+** threads while sqlite3_config() is running. Furthermore, sqlite3_config()
+** may only be invoked prior to library initialization using
+** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
+** Note, however, that sqlite3_config() can be called as part of the
+** implementation of an application-defined [sqlite3_os_init()].
+**
+** The first argument to sqlite3_config() is an integer
+** [SQLITE_CONFIG_SINGLETHREAD | configuration option] that determines
+** what property of SQLite is to be configured. Subsequent arguments
+** vary depending on the [SQLITE_CONFIG_SINGLETHREAD | configuration option]
+** in the first argument.
+**
+** When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
+** If the option is unknown or SQLite is unable to set the option
+** then this routine returns a non-zero [error code].
+**
+** Requirements:
+** [H14103] [H14106] [H14120] [H14123] [H14126] [H14129] [H14132] [H14135]
+** [H14138] [H14141] [H14144] [H14147] [H14150] [H14153] [H14156] [H14159]
+** [H14162] [H14165] [H14168]
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_config(int, ...);
+
+/*
+** CAPI3REF: Configure database connections {H14200} <S20000>
+** EXPERIMENTAL
+**
+** The sqlite3_db_config() interface is used to make configuration
+** changes to a [database connection]. The interface is similar to
+** [sqlite3_config()] except that the changes apply to a single
+** [database connection] (specified in the first argument). The
+** sqlite3_db_config() interface can only be used immediately after
+** the database connection is created using [sqlite3_open()],
+** [sqlite3_open16()], or [sqlite3_open_v2()].
+**
+** The second argument to sqlite3_db_config(D,V,...) is the
+** configuration verb - an integer code that indicates what
+** aspect of the [database connection] is being configured.
+** The only choice for this value is [SQLITE_DBCONFIG_LOOKASIDE].
+** New verbs are likely to be added in future releases of SQLite.
+** Additional arguments depend on the verb.
+**
+** Requirements:
+** [H14203] [H14206] [H14209] [H14212] [H14215]
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_db_config(sqlite3*, int op, ...);
+
+/*
+** CAPI3REF: Memory Allocation Routines {H10155} <S20120>
+** EXPERIMENTAL
+**
+** An instance of this object defines the interface between SQLite
+** and low-level memory allocation routines.
+**
+** This object is used in only one place in the SQLite interface.
+** A pointer to an instance of this object is the argument to
+** [sqlite3_config()] when the configuration option is
+** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC].
+** By creating an instance of this object
+** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC])
+** during configuration, an application can specify an alternative
+** memory allocation subsystem for SQLite to use for all of its
+** dynamic memory needs.
+**
+** Note that SQLite comes with several [built-in memory allocators]
+** that are perfectly adequate for the overwhelming majority of applications
+** and that this object is only useful to a tiny minority of applications
+** with specialized memory allocation requirements. This object is
+** also used during testing of SQLite in order to specify an alternative
+** memory allocator that simulates memory out-of-memory conditions in
+** order to verify that SQLite recovers gracefully from such
+** conditions.
+**
+** The xMalloc and xFree methods must work like the
+** malloc() and free() functions from the standard C library.
+** The xRealloc method must work like realloc() from the standard C library
+** with the exception that if the second argument to xRealloc is zero,
+** xRealloc must be a no-op - it must not perform any allocation or
+** deallocation. SQLite guaranteeds that the second argument to
+** xRealloc is always a value returned by a prior call to xRoundup.
+** And so in cases where xRoundup always returns a positive number,
+** xRealloc can perform exactly as the standard library realloc() and
+** still be in compliance with this specification.
+**
+** xSize should return the allocated size of a memory allocation
+** previously obtained from xMalloc or xRealloc. The allocated size
+** is always at least as big as the requested size but may be larger.
+**
+** The xRoundup method returns what would be the allocated size of
+** a memory allocation given a particular requested size. Most memory
+** allocators round up memory allocations at least to the next multiple
+** of 8. Some allocators round up to a larger multiple or to a power of 2.
+** Every memory allocation request coming in through [sqlite3_malloc()]
+** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0,
+** that causes the corresponding memory allocation to fail.
+**
+** The xInit method initializes the memory allocator. (For example,
+** it might allocate any require mutexes or initialize internal data
+** structures. The xShutdown method is invoked (indirectly) by
+** [sqlite3_shutdown()] and should deallocate any resources acquired
+** by xInit. The pAppData pointer is used as the only parameter to
+** xInit and xShutdown.
+**
+** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes
+** the xInit method, so the xInit method need not be threadsafe. The
+** xShutdown method is only called from [sqlite3_shutdown()] so it does
+** not need to be threadsafe either. For all other methods, SQLite
+** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the
+** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which
+** it is by default) and so the methods are automatically serialized.
+** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other
+** methods must be threadsafe or else make their own arrangements for
+** serialization.
+**
+** SQLite will never invoke xInit() more than once without an intervening
+** call to xShutdown().
+*/
+typedef struct sqlite3_mem_methods sqlite3_mem_methods;
+struct sqlite3_mem_methods {
+ void *(*xMalloc)(int); /* Memory allocation function */
+ void (*xFree)(void*); /* Free a prior allocation */
+ void *(*xRealloc)(void*,int); /* Resize an allocation */
+ int (*xSize)(void*); /* Return the size of an allocation */
+ int (*xRoundup)(int); /* Round up request size to allocation size */
+ int (*xInit)(void*); /* Initialize the memory allocator */
+ void (*xShutdown)(void*); /* Deinitialize the memory allocator */
+ void *pAppData; /* Argument to xInit() and xShutdown() */
+};
+
+/*
+** CAPI3REF: Configuration Options {H10160} <S20000>
+** EXPERIMENTAL
+**
+** These constants are the available integer configuration options that
+** can be passed as the first argument to the [sqlite3_config()] interface.
+**
+** New configuration options may be added in future releases of SQLite.
+** Existing configuration options might be discontinued. Applications
+** should check the return code from [sqlite3_config()] to make sure that
+** the call worked. The [sqlite3_config()] interface will return a
+** non-zero [error code] if a discontinued or unsupported configuration option
+** is invoked.
+**
+** <dl>
+** <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
+** <dd>There are no arguments to this option. This option disables
+** all mutexing and puts SQLite into a mode where it can only be used
+** by a single thread.</dd>
+**
+** <dt>SQLITE_CONFIG_MULTITHREAD</dt>
+** <dd>There are no arguments to this option. This option disables
+** mutexing on [database connection] and [prepared statement] objects.
+** The application is responsible for serializing access to
+** [database connections] and [prepared statements]. But other mutexes
+** are enabled so that SQLite will be safe to use in a multi-threaded
+** environment as long as no two threads attempt to use the same
+** [database connection] at the same time. See the [threading mode]
+** documentation for additional information.</dd>
+**
+** <dt>SQLITE_CONFIG_SERIALIZED</dt>
+** <dd>There are no arguments to this option. This option enables
+** all mutexes including the recursive
+** mutexes on [database connection] and [prepared statement] objects.
+** In this mode (which is the default when SQLite is compiled with
+** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access
+** to [database connections] and [prepared statements] so that the
+** application is free to use the same [database connection] or the
+** same [prepared statement] in different threads at the same time.
+** See the [threading mode] documentation for additional information.</dd>
+**
+** <dt>SQLITE_CONFIG_MALLOC</dt>
+** <dd>This option takes a single argument which is a pointer to an
+** instance of the [sqlite3_mem_methods] structure. The argument specifies
+** alternative low-level memory allocation routines to be used in place of
+** the memory allocation routines built into SQLite.</dd>
+**
+** <dt>SQLITE_CONFIG_GETMALLOC</dt>
+** <dd>This option takes a single argument which is a pointer to an
+** instance of the [sqlite3_mem_methods] structure. The [sqlite3_mem_methods]
+** structure is filled with the currently defined memory allocation routines.
+** This option can be used to overload the default memory allocation
+** routines with a wrapper that simulations memory allocation failure or
+** tracks memory usage, for example.</dd>
+**
+** <dt>SQLITE_CONFIG_MEMSTATUS</dt>
+** <dd>This option takes single argument of type int, interpreted as a
+** boolean, which enables or disables the collection of memory allocation
+** statistics. When disabled, the following SQLite interfaces become
+** non-operational:
+** <ul>
+** <li> [sqlite3_memory_used()]
+** <li> [sqlite3_memory_highwater()]
+** <li> [sqlite3_soft_heap_limit()]
+** <li> [sqlite3_status()]
+** </ul>
+** </dd>
+**
+** <dt>SQLITE_CONFIG_SCRATCH</dt>
+** <dd>This option specifies a static memory buffer that SQLite can use for
+** scratch memory. There are three arguments: A pointer an 8-byte
+** aligned memory buffer from which the scrach allocations will be
+** drawn, the size of each scratch allocation (sz),
+** and the maximum number of scratch allocations (N). The sz
+** argument must be a multiple of 16. The sz parameter should be a few bytes
+** larger than the actual scratch space required due to internal overhead.
+** The first argument should pointer to an 8-byte aligned buffer
+** of at least sz*N bytes of memory.
+** SQLite will use no more than one scratch buffer at once per thread, so
+** N should be set to the expected maximum number of threads. The sz
+** parameter should be 6 times the size of the largest database page size.
+** Scratch buffers are used as part of the btree balance operation. If
+** The btree balancer needs additional memory beyond what is provided by
+** scratch buffers or if no scratch buffer space is specified, then SQLite
+** goes to [sqlite3_malloc()] to obtain the memory it needs.</dd>
+**
+** <dt>SQLITE_CONFIG_PAGECACHE</dt>
+** <dd>This option specifies a static memory buffer that SQLite can use for
+** the database page cache with the default page cache implemenation.
+** This configuration should not be used if an application-define page
+** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option.
+** There are three arguments to this option: A pointer to 8-byte aligned
+** memory, the size of each page buffer (sz), and the number of pages (N).
+** The sz argument should be the size of the largest database page
+** (a power of two between 512 and 32768) plus a little extra for each
+** page header. The page header size is 20 to 40 bytes depending on
+** the host architecture. It is harmless, apart from the wasted memory,
+** to make sz a little too large. The first
+** argument should point to an allocation of at least sz*N bytes of memory.
+** SQLite will use the memory provided by the first argument to satisfy its
+** memory needs for the first N pages that it adds to cache. If additional
+** page cache memory is needed beyond what is provided by this option, then
+** SQLite goes to [sqlite3_malloc()] for the additional storage space.
+** The implementation might use one or more of the N buffers to hold
+** memory accounting information. The pointer in the first argument must
+** be aligned to an 8-byte boundary or subsequent behavior of SQLite
+** will be undefined.</dd>
+**
+** <dt>SQLITE_CONFIG_HEAP</dt>
+** <dd>This option specifies a static memory buffer that SQLite will use
+** for all of its dynamic memory allocation needs beyond those provided
+** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE].
+** There are three arguments: An 8-byte aligned pointer to the memory,
+** the number of bytes in the memory buffer, and the minimum allocation size.
+** If the first pointer (the memory pointer) is NULL, then SQLite reverts
+** to using its default memory allocator (the system malloc() implementation),
+** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. If the
+** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or
+** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
+** allocator is engaged to handle all of SQLites memory allocation needs.
+** The first pointer (the memory pointer) must be aligned to an 8-byte
+** boundary or subsequent behavior of SQLite will be undefined.</dd>
+**
+** <dt>SQLITE_CONFIG_MUTEX</dt>
+** <dd>This option takes a single argument which is a pointer to an
+** instance of the [sqlite3_mutex_methods] structure. The argument specifies
+** alternative low-level mutex routines to be used in place
+** the mutex routines built into SQLite.</dd>
+**
+** <dt>SQLITE_CONFIG_GETMUTEX</dt>
+** <dd>This option takes a single argument which is a pointer to an
+** instance of the [sqlite3_mutex_methods] structure. The
+** [sqlite3_mutex_methods]
+** structure is filled with the currently defined mutex routines.
+** This option can be used to overload the default mutex allocation
+** routines with a wrapper used to track mutex usage for performance
+** profiling or testing, for example.</dd>
+**
+** <dt>SQLITE_CONFIG_LOOKASIDE</dt>
+** <dd>This option takes two arguments that determine the default
+** memory allocation lookaside optimization. The first argument is the
+** size of each lookaside buffer slot and the second is the number of
+** slots allocated to each database connection. This option sets the
+** <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
+** verb to [sqlite3_db_config()] can be used to change the lookaside
+** configuration on individual connections.</dd>
+**
+** <dt>SQLITE_CONFIG_PCACHE</dt>
+** <dd>This option takes a single argument which is a pointer to
+** an [sqlite3_pcache_methods] object. This object specifies the interface
+** to a custom page cache implementation. SQLite makes a copy of the
+** object and uses it for page cache memory allocations.</dd>
+**
+** <dt>SQLITE_CONFIG_GETPCACHE</dt>
+** <dd>This option takes a single argument which is a pointer to an
+** [sqlite3_pcache_methods] object. SQLite copies of the current
+** page cache implementation into that object.</dd>
+**
+** </dl>
+*/
+#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */
+#define SQLITE_CONFIG_MULTITHREAD 2 /* nil */
+#define SQLITE_CONFIG_SERIALIZED 3 /* nil */
+#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */
+#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */
+#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */
+#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */
+#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */
+#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */
+#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */
+#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */
+/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */
+#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */
+#define SQLITE_CONFIG_PCACHE 14 /* sqlite3_pcache_methods* */
+#define SQLITE_CONFIG_GETPCACHE 15 /* sqlite3_pcache_methods* */
+
+/*
+** CAPI3REF: Configuration Options {H10170} <S20000>
+** EXPERIMENTAL
+**
+** These constants are the available integer configuration options that
+** can be passed as the second argument to the [sqlite3_db_config()] interface.
+**
+** New configuration options may be added in future releases of SQLite.
+** Existing configuration options might be discontinued. Applications
+** should check the return code from [sqlite3_db_config()] to make sure that
+** the call worked. The [sqlite3_db_config()] interface will return a
+** non-zero [error code] if a discontinued or unsupported configuration option
+** is invoked.
+**
+** <dl>
+** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
+** <dd>This option takes three additional arguments that determine the
+** [lookaside memory allocator] configuration for the [database connection].
+** The first argument (the third parameter to [sqlite3_db_config()] is a
+** pointer to an memory buffer to use for lookaside memory.
+** The first argument may be NULL in which case SQLite will allocate the
+** lookaside buffer itself using [sqlite3_malloc()]. The second argument is the
+** size of each lookaside buffer slot and the third argument is the number of
+** slots. The size of the buffer in the first argument must be greater than
+** or equal to the product of the second and third arguments. The buffer
+** must be aligned to an 8-byte boundary. If the second argument is not
+** a multiple of 8, it is internally rounded down to the next smaller
+** multiple of 8. See also: [SQLITE_CONFIG_LOOKASIDE]</dd>
+**
+** </dl>
+*/
+#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
+
+
+/*
+** CAPI3REF: Enable Or Disable Extended Result Codes {H12200} <S10700>
+**
+** The sqlite3_extended_result_codes() routine enables or disables the
+** [extended result codes] feature of SQLite. The extended result
+** codes are disabled by default for historical compatibility considerations.
+**
+** Requirements:
+** [H12201] [H12202]
+*/
+SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
+
+/*
+** CAPI3REF: Last Insert Rowid {H12220} <S10700>
+**
+** Each entry in an SQLite table has a unique 64-bit signed
+** integer key called the [ROWID | "rowid"]. The rowid is always available
+** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
+** names are not also used by explicitly declared columns. If
+** the table has a column of type [INTEGER PRIMARY KEY] then that column
+** is another alias for the rowid.
+**
+** This routine returns the [rowid] of the most recent
+** successful [INSERT] into the database from the [database connection]
+** in the first argument. If no successful [INSERT]s
+** have ever occurred on that database connection, zero is returned.
+**
+** If an [INSERT] occurs within a trigger, then the [rowid] of the inserted
+** row is returned by this routine as long as the trigger is running.
+** But once the trigger terminates, the value returned by this routine
+** reverts to the last value inserted before the trigger fired.
+**
+** An [INSERT] that fails due to a constraint violation is not a
+** successful [INSERT] and does not change the value returned by this
+** routine. Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
+** and INSERT OR ABORT make no changes to the return value of this
+** routine when their insertion fails. When INSERT OR REPLACE
+** encounters a constraint violation, it does not fail. The
+** INSERT continues to completion after deleting rows that caused
+** the constraint problem so INSERT OR REPLACE will always change
+** the return value of this interface.
+**
+** For the purposes of this routine, an [INSERT] is considered to
+** be successful even if it is subsequently rolled back.
+**
+** Requirements:
+** [H12221] [H12223]
+**
+** If a separate thread performs a new [INSERT] on the same
+** database connection while the [sqlite3_last_insert_rowid()]
+** function is running and thus changes the last insert [rowid],
+** then the value returned by [sqlite3_last_insert_rowid()] is
+** unpredictable and might not equal either the old or the new
+** last insert [rowid].
+*/
+SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
+
+/*
+** CAPI3REF: Count The Number Of Rows Modified {H12240} <S10600>
+**
+** This function returns the number of database rows that were changed
+** or inserted or deleted by the most recently completed SQL statement
+** on the [database connection] specified by the first parameter.
+** Only changes that are directly specified by the [INSERT], [UPDATE],
+** or [DELETE] statement are counted. Auxiliary changes caused by
+** triggers or [foreign key actions] are not counted. Use the
+** [sqlite3_total_changes()] function to find the total number of changes
+** including changes caused by triggers and foreign key actions.
+**
+** Changes to a view that are simulated by an [INSTEAD OF trigger]
+** are not counted. Only real table changes are counted.
+**
+** A "row change" is a change to a single row of a single table
+** caused by an INSERT, DELETE, or UPDATE statement. Rows that
+** are changed as side effects of [REPLACE] constraint resolution,
+** rollback, ABORT processing, [DROP TABLE], or by any other
+** mechanisms do not count as direct row changes.
+**
+** A "trigger context" is a scope of execution that begins and
+** ends with the script of a [CREATE TRIGGER | trigger].
+** Most SQL statements are
+** evaluated outside of any trigger. This is the "top level"
+** trigger context. If a trigger fires from the top level, a
+** new trigger context is entered for the duration of that one
+** trigger. Subtriggers create subcontexts for their duration.
+**
+** Calling [sqlite3_exec()] or [sqlite3_step()] recursively does
+** not create a new trigger context.
+**
+** This function returns the number of direct row changes in the
+** most recent INSERT, UPDATE, or DELETE statement within the same
+** trigger context.
+**
+** Thus, when called from the top level, this function returns the
+** number of changes in the most recent INSERT, UPDATE, or DELETE
+** that also occurred at the top level. Within the body of a trigger,
+** the sqlite3_changes() interface can be called to find the number of
+** changes in the most recently completed INSERT, UPDATE, or DELETE
+** statement within the body of the same trigger.
+** However, the number returned does not include changes
+** caused by subtriggers since those have their own context.
+**
+** See also the [sqlite3_total_changes()] interface and the
+** [count_changes pragma].
+**
+** Requirements:
+** [H12241] [H12243]
+**
+** If a separate thread makes changes on the same database connection
+** while [sqlite3_changes()] is running then the value returned
+** is unpredictable and not meaningful.
+*/
+SQLITE_API int sqlite3_changes(sqlite3*);
+
+/*
+** CAPI3REF: Total Number Of Rows Modified {H12260} <S10600>
+**
+** This function returns the number of row changes caused by [INSERT],
+** [UPDATE] or [DELETE] statements since the [database connection] was opened.
+** The count includes all changes from all [CREATE TRIGGER | trigger]
+** contexts and changes made by [foreign key actions]. However,
+** the count does not include changes used to implement [REPLACE] constraints,
+** do rollbacks or ABORT processing, or [DROP TABLE] processing. The
+** count does not include rows of views that fire an [INSTEAD OF trigger],
+** though if the INSTEAD OF trigger makes changes of its own, those changes
+** are counted.
+** The changes are counted as soon as the statement that makes them is
+** completed (when the statement handle is passed to [sqlite3_reset()] or
+** [sqlite3_finalize()]).
+**
+** See also the [sqlite3_changes()] interface and the
+** [count_changes pragma].
+**
+** Requirements:
+** [H12261] [H12263]
+**
+** If a separate thread makes changes on the same database connection
+** while [sqlite3_total_changes()] is running then the value
+** returned is unpredictable and not meaningful.
+*/
+SQLITE_API int sqlite3_total_changes(sqlite3*);
+
+/*
+** CAPI3REF: Interrupt A Long-Running Query {H12270} <S30500>
+**
+** This function causes any pending database operation to abort and
+** return at its earliest opportunity. This routine is typically
+** called in response to a user action such as pressing "Cancel"
+** or Ctrl-C where the user wants a long query operation to halt
+** immediately.
+**
+** It is safe to call this routine from a thread different from the
+** thread that is currently running the database operation. But it
+** is not safe to call this routine with a [database connection] that
+** is closed or might close before sqlite3_interrupt() returns.
+**
+** If an SQL operation is very nearly finished at the time when
+** sqlite3_interrupt() is called, then it might not have an opportunity
+** to be interrupted and might continue to completion.
+**
+** An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
+** If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
+** that is inside an explicit transaction, then the entire transaction
+** will be rolled back automatically.
+**
+** The sqlite3_interrupt(D) call is in effect until all currently running
+** SQL statements on [database connection] D complete. Any new SQL statements
+** that are started after the sqlite3_interrupt() call and before the
+** running statements reaches zero are interrupted as if they had been
+** running prior to the sqlite3_interrupt() call. New SQL statements
+** that are started after the running statement count reaches zero are
+** not effected by the sqlite3_interrupt().
+** A call to sqlite3_interrupt(D) that occurs when there are no running
+** SQL statements is a no-op and has no effect on SQL statements
+** that are started after the sqlite3_interrupt() call returns.
+**
+** Requirements:
+** [H12271] [H12272]
+**
+** If the database connection closes while [sqlite3_interrupt()]
+** is running then bad things will likely happen.
+*/
+SQLITE_API void sqlite3_interrupt(sqlite3*);
+
+/*
+** CAPI3REF: Determine If An SQL Statement Is Complete {H10510} <S70200>
+**
+** These routines are useful during command-line input to determine if the
+** currently entered text seems to form a complete SQL statement or
+** if additional input is needed before sending the text into
+** SQLite for parsing. These routines return 1 if the input string
+** appears to be a complete SQL statement. A statement is judged to be
+** complete if it ends with a semicolon token and is not a prefix of a
+** well-formed CREATE TRIGGER statement. Semicolons that are embedded within
+** string literals or quoted identifier names or comments are not
+** independent tokens (they are part of the token in which they are
+** embedded) and thus do not count as a statement terminator. Whitespace
+** and comments that follow the final semicolon are ignored.
+**
+** These routines return 0 if the statement is incomplete. If a
+** memory allocation fails, then SQLITE_NOMEM is returned.
+**
+** These routines do not parse the SQL statements thus
+** will not detect syntactically incorrect SQL.
+**
+** If SQLite has not been initialized using [sqlite3_initialize()] prior
+** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked
+** automatically by sqlite3_complete16(). If that initialization fails,
+** then the return value from sqlite3_complete16() will be non-zero
+** regardless of whether or not the input SQL is complete.
+**
+** Requirements: [H10511] [H10512]
+**
+** The input to [sqlite3_complete()] must be a zero-terminated
+** UTF-8 string.
+**
+** The input to [sqlite3_complete16()] must be a zero-terminated
+** UTF-16 string in native byte order.
+*/
+SQLITE_API int sqlite3_complete(const char *sql);
+SQLITE_API int sqlite3_complete16(const void *sql);
+
+/*
+** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors {H12310} <S40400>
+**
+** This routine sets a callback function that might be invoked whenever
+** an attempt is made to open a database table that another thread
+** or process has locked.
+**
+** If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
+** is returned immediately upon encountering the lock. If the busy callback
+** is not NULL, then the callback will be invoked with two arguments.
+**
+** The first argument to the handler is a copy of the void* pointer which
+** is the third argument to sqlite3_busy_handler(). The second argument to
+** the handler callback is the number of times that the busy handler has
[... 108826 lines stripped ...]