You are viewing a plain text version of this content. The canonical link for it is here.
Posted to server-user@james.apache.org by Gerry Matte <Ge...@shaw.ca> on 2010/11/10 05:49:08 UTC
Gerry cant test for a little while
I also encountered this problem and used Eric's solution (commented out
RemoteAddrNotInNetwork in mailetcontainer.xml) because I require AUTH in my
SMTP.
I have still encountered unusual results - connections being refused for
example so I have reverted back to james 2.3.2 temporarily.
I mostly wanted to let Norman and Eric know that due to a death in the
family and associated travel, I am unable to do much with James until
sometime next week. I'll be back onto the testing trail after about a
week's delay.
Once I have James 3 in production, I plan to start working on the schema for
the CONF files.
Gerry
--------------------------------------------------
From: "Eric Charles" <er...@apache.org>
Sent: Tuesday, November 09, 2010 10:35 AM
To: "James Users List" <se...@james.apache.org>
Subject: Re: Sending mails always gets relayed denied (not localhost)
> Good.
> (I will also remove remaining unneeded mailets: check for virus header
> without running virus scan,...).
> Tks,
> Eric
>
>
> On 9/11/2010 19:26, Norman Maurer wrote:
>> I think we should remove it..
>>
>> Bye,
>> Norman
>>
>> 2010/11/9 Eric Charles<er...@apache.org>:
>>> Hi,
>>>
>>> RemoteAddrNotInNetwork is still in the default conf for M2.
>>> Should we leave it as such and document it or simply remove it.
>>> The smtp auth being now enabled in smtpserver.xml, the remove should not
>>> arm.
>>> WDYT?
>>>
>>> Eric
>>>
>>>
>>> On 9/11/2010 18:23, Norman Maurer wrote:
>>>> Hi Craig,
>>>>
>>>> make sure you don't have the RemoteAddrNotInNetwork configured in
>>>> mailetcontainer.xml. This needs to get removed when you use smtp auth.
>>>>
>>>> Bye,
>>>> Norman
>>>>
>>>>
>>>> 2010/11/9 Craig Greenhalgh<cr...@intersoftsolutions.co.uk>:
>>>>> Hi I have tried this and i get similar results, here is my log:
>>>>>
>>>>> The authenication seams to work, "AUTH method PLAIN succeeded"&
>>>>> "Sender
>>>>> allowed" but I still get "Storing mail Mail1289320653918-1 in
>>>>> file://var/mail/relay-denied/"
>>>>> and nothing is delivered
>>>>>
>>>>> Any ideas?
>>>>>
>>>>> Thanks
>>>>>
>>>>> Craig
>>>>>
>>>>>
>>>>> DEBUG 16:37:33,622 | james.smtpserver | Lookup command handler for
>>>>> command:
>>>>> EHLO
>>>>> DEBUG 16:37:33,665 | james.smtpserver | Lookup command handler for
>>>>> command:
>>>>> AUTH
>>>>> DEBUG 16:37:33,677 | james.smtpserver | executing hook
>>>>> org.apache.james.smtpserver.UsersRepositoryAuthHook@109aca82
>>>>> DEBUG 16:37:33,693 | james.smtpserver | AUTH method PLAIN succeeded
>>>>> DEBUG 16:37:33,728 | james.smtpserver | Lookup command handler for
>>>>> command:
>>>>> MAIL
>>>>> DEBUG 16:37:33,764 | james.smtpserver | Lookup command handler for
>>>>> command:
>>>>> RCPT
>>>>> DEBUG 16:37:33,765 | james.smtpserver | executing hook
>>>>> org.apache.james.smtpserver.AuthRequiredToRelayRcptHook
>>>>> DEBUG 16:37:33,766 | james.smtpserver | executing hook
>>>>> org.apache.james.smtpserver.SenderAuthIdentifyVerificationRcptHook
>>>>> DEBUG 16:37:33,771 | james.smtpserver | executing hook
>>>>> org.apache.james.protocols.smtp.core.PostmasterAbuseRcptHook
>>>>> DEBUG 16:37:33,771 | james.smtpserver | executing hook
>>>>> org.apache.james.smtpserver.fastfail.ValidRcptHandler
>>>>> DEBUG 16:37:33,772 | james.smtpserver | Sender allowed
>>>>> DEBUG 16:37:33,810 | james.smtpserver | Lookup command handler for
>>>>> command:
>>>>> DATA
>>>>> DEBUG 16:37:33,946 | james.smtpserver | executing james message
>>>>> handler
>>>>>
>>>>> org.apache.james.protocols.smtp.core.esmtp.MailSizeEsmtpExtension@6efde050
>>>>> DEBUG 16:37:33,948 | james.smtpserver | executing james message
>>>>> handler
>>>>> org.apache.james.smtpserver.AddDefaultAttributesMessageHook@5e4f12c2
>>>>> DEBUG 16:37:33,949 | james.smtpserver | executing james message
>>>>> handler
>>>>> org.apache.james.smtpserver.SendMailHandler@191e0eb
>>>>> DEBUG 16:37:33,949 | james.smtpserver | sending mail
>>>>> INFO 16:37:33,977 | james.smtpserver | Successfully spooled mail
>>>>> Mail1289320653918-1 from test@trouble-ticket.co.uk on 84.9.164.34 for
>>>>> [Craig.Greenhalgh@IntersoftSolutions.co.uk]
>>>>> DEBUG 16:37:34,028 | james.smtpserver | Lookup command handler for
>>>>> command:
>>>>> QUIT
>>>>> DEBUG 16:37:34,031 | james.smtpserver | Dispose objects while closing
>>>>> channel 1382067420
>>>>> INFO 16:37:34,354 | james.mailetcontext | Storing mail
>>>>> Mail1289320653918-1
>>>>> in file://var/mail/relay-denied/
>>>>>
>>>>>
>>>>>
>>>>> On 09/11/2010 16:17, Eric Charles wrote:
>>>>>> Hi Graig,
>>>>>>
>>>>>> The following conf file should do the job
>>>>>>
>>>>>>
>>>>>> https://svn.apache.org/repos/asf/james/server/trunk/container-spring/src/main/config/james/smtpserver.xml
>>>>>>
>>>>>> If you've already tested it and it still does not work, can you send
>>>>>> the
>>>>>> log message written in ./log/james-server.log ?
>>>>>> (You of course have to send with smtp auth enable in your mail
>>>>>> client,
>>>>>> james should ask for it).
>>>>>>
>>>>>> Tks,
>>>>>>
>>>>>> Eric
>>>>>>
>>>>>>
>>>>>> On 9/11/2010 16:49, Craig Greenhalgh wrote:
>>>>>>> Hi I'm using 3.0M1, I have set up my server and all works fine
>>>>>>> locally.
>>>>>>>
>>>>>>> When I send a mail from a different machine, it always results in
>>>>>>> this
>>>>>>> being placed in relay-denied.
>>>>>>>
>>>>>>> I have tried all combinations of authRequired and
>>>>>>> authorizedAddresses
>>>>>>>
>>>>>>> Am I missing something stupid?
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Craig
>>>>>>>
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>
>>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>
>>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>> For additional commands, e-mail: server-user-help@james.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: Gerry cant test for a little while
Posted by Norman Maurer <no...@apache.org>.
Same here.. I'm really sorry to hear that. Take your time..
Bye,
Norman
2010/11/10 Eric Charles <er...@apache.org>:
> Dear Gerry,
> All my condolences for the death in you family.
> Eric
>
> PS : Many tks for all your tests and help. We hope to have M2 within the
> week.
>
>
> On 10/11/2010 05:49, Gerry Matte wrote:
>>
>> I also encountered this problem and used Eric's solution (commented out
>> RemoteAddrNotInNetwork in mailetcontainer.xml) because I require AUTH in my
>> SMTP.
>> I have still encountered unusual results - connections being refused for
>> example so I have reverted back to james 2.3.2 temporarily.
>>
>> I mostly wanted to let Norman and Eric know that due to a death in the
>> family and associated travel, I am unable to do much with James until
>> sometime next week. I'll be back onto the testing trail after about a
>> week's delay.
>>
>> Once I have James 3 in production, I plan to start working on the schema
>> for the CONF files.
>> Gerry
>>
>> --------------------------------------------------
>> From: "Eric Charles" <er...@apache.org>
>> Sent: Tuesday, November 09, 2010 10:35 AM
>> To: "James Users List" <se...@james.apache.org>
>> Subject: Re: Sending mails always gets relayed denied (not localhost)
>>
>>> Good.
>>> (I will also remove remaining unneeded mailets: check for virus header
>>> without running virus scan,...).
>>> Tks,
>>> Eric
>>>
>>>
>>> On 9/11/2010 19:26, Norman Maurer wrote:
>>>>
>>>> I think we should remove it..
>>>>
>>>> Bye,
>>>> Norman
>>>>
>>>> 2010/11/9 Eric Charles<er...@apache.org>:
>>>>>
>>>>> Hi,
>>>>>
>>>>> RemoteAddrNotInNetwork is still in the default conf for M2.
>>>>> Should we leave it as such and document it or simply remove it.
>>>>> The smtp auth being now enabled in smtpserver.xml, the remove should
>>>>> not
>>>>> arm.
>>>>> WDYT?
>>>>>
>>>>> Eric
>>>>>
>>>>>
>>>>> On 9/11/2010 18:23, Norman Maurer wrote:
>>>>>>
>>>>>> Hi Craig,
>>>>>>
>>>>>> make sure you don't have the RemoteAddrNotInNetwork configured in
>>>>>> mailetcontainer.xml. This needs to get removed when you use smtp auth.
>>>>>>
>>>>>> Bye,
>>>>>> Norman
>>>>>>
>>>>>>
>>>>>> 2010/11/9 Craig Greenhalgh<cr...@intersoftsolutions.co.uk>:
>>>>>>>
>>>>>>> Hi I have tried this and i get similar results, here is my log:
>>>>>>>
>>>>>>> The authenication seams to work, "AUTH method PLAIN succeeded"&
>>>>>>> "Sender
>>>>>>> allowed" but I still get "Storing mail Mail1289320653918-1 in
>>>>>>> file://var/mail/relay-denied/"
>>>>>>> and nothing is delivered
>>>>>>>
>>>>>>> Any ideas?
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Craig
>>>>>>>
>>>>>>>
>>>>>>> DEBUG 16:37:33,622 | james.smtpserver | Lookup command handler for
>>>>>>> command:
>>>>>>> EHLO
>>>>>>> DEBUG 16:37:33,665 | james.smtpserver | Lookup command handler for
>>>>>>> command:
>>>>>>> AUTH
>>>>>>> DEBUG 16:37:33,677 | james.smtpserver | executing hook
>>>>>>> org.apache.james.smtpserver.UsersRepositoryAuthHook@109aca82
>>>>>>> DEBUG 16:37:33,693 | james.smtpserver | AUTH method PLAIN succeeded
>>>>>>> DEBUG 16:37:33,728 | james.smtpserver | Lookup command handler for
>>>>>>> command:
>>>>>>> MAIL
>>>>>>> DEBUG 16:37:33,764 | james.smtpserver | Lookup command handler for
>>>>>>> command:
>>>>>>> RCPT
>>>>>>> DEBUG 16:37:33,765 | james.smtpserver | executing hook
>>>>>>> org.apache.james.smtpserver.AuthRequiredToRelayRcptHook
>>>>>>> DEBUG 16:37:33,766 | james.smtpserver | executing hook
>>>>>>> org.apache.james.smtpserver.SenderAuthIdentifyVerificationRcptHook
>>>>>>> DEBUG 16:37:33,771 | james.smtpserver | executing hook
>>>>>>> org.apache.james.protocols.smtp.core.PostmasterAbuseRcptHook
>>>>>>> DEBUG 16:37:33,771 | james.smtpserver | executing hook
>>>>>>> org.apache.james.smtpserver.fastfail.ValidRcptHandler
>>>>>>> DEBUG 16:37:33,772 | james.smtpserver | Sender allowed
>>>>>>> DEBUG 16:37:33,810 | james.smtpserver | Lookup command handler for
>>>>>>> command:
>>>>>>> DATA
>>>>>>> DEBUG 16:37:33,946 | james.smtpserver | executing james message
>>>>>>> handler
>>>>>>>
>>>>>>>
>>>>>>> org.apache.james.protocols.smtp.core.esmtp.MailSizeEsmtpExtension@6efde050
>>>>>>> DEBUG 16:37:33,948 | james.smtpserver | executing james message
>>>>>>> handler
>>>>>>> org.apache.james.smtpserver.AddDefaultAttributesMessageHook@5e4f12c2
>>>>>>> DEBUG 16:37:33,949 | james.smtpserver | executing james message
>>>>>>> handler
>>>>>>> org.apache.james.smtpserver.SendMailHandler@191e0eb
>>>>>>> DEBUG 16:37:33,949 | james.smtpserver | sending mail
>>>>>>> INFO 16:37:33,977 | james.smtpserver | Successfully spooled mail
>>>>>>> Mail1289320653918-1 from test@trouble-ticket.co.uk on 84.9.164.34 for
>>>>>>> [Craig.Greenhalgh@IntersoftSolutions.co.uk]
>>>>>>> DEBUG 16:37:34,028 | james.smtpserver | Lookup command handler for
>>>>>>> command:
>>>>>>> QUIT
>>>>>>> DEBUG 16:37:34,031 | james.smtpserver | Dispose objects while closing
>>>>>>> channel 1382067420
>>>>>>> INFO 16:37:34,354 | james.mailetcontext | Storing mail
>>>>>>> Mail1289320653918-1
>>>>>>> in file://var/mail/relay-denied/
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 09/11/2010 16:17, Eric Charles wrote:
>>>>>>>>
>>>>>>>> Hi Graig,
>>>>>>>>
>>>>>>>> The following conf file should do the job
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> https://svn.apache.org/repos/asf/james/server/trunk/container-spring/src/main/config/james/smtpserver.xml
>>>>>>>>
>>>>>>>> If you've already tested it and it still does not work, can you send
>>>>>>>> the
>>>>>>>> log message written in ./log/james-server.log ?
>>>>>>>> (You of course have to send with smtp auth enable in your mail
>>>>>>>> client,
>>>>>>>> james should ask for it).
>>>>>>>>
>>>>>>>> Tks,
>>>>>>>>
>>>>>>>> Eric
>>>>>>>>
>>>>>>>>
>>>>>>>> On 9/11/2010 16:49, Craig Greenhalgh wrote:
>>>>>>>>>
>>>>>>>>> Hi I'm using 3.0M1, I have set up my server and all works fine
>>>>>>>>> locally.
>>>>>>>>>
>>>>>>>>> When I send a mail from a different machine, it always results in
>>>>>>>>> this
>>>>>>>>> being placed in relay-denied.
>>>>>>>>>
>>>>>>>>> I have tried all combinations of authRequired and
>>>>>>>>> authorizedAddresses
>>>>>>>>>
>>>>>>>>> Am I missing something stupid?
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>>
>>>>>>>>> Craig
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>>>>
>>>>>>>>
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>>>
>>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>>
>>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>
>>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>> For additional commands, e-mail: server-user-help@james.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: Gerry cant test for a little while
Posted by Eric Charles <er...@apache.org>.
Dear Gerry,
All my condolences for the death in you family.
Eric
PS : Many tks for all your tests and help. We hope to have M2 within the
week.
On 10/11/2010 05:49, Gerry Matte wrote:
> I also encountered this problem and used Eric's solution (commented
> out RemoteAddrNotInNetwork in mailetcontainer.xml) because I require
> AUTH in my SMTP.
> I have still encountered unusual results - connections being refused
> for example so I have reverted back to james 2.3.2 temporarily.
>
> I mostly wanted to let Norman and Eric know that due to a death in the
> family and associated travel, I am unable to do much with James until
> sometime next week. I'll be back onto the testing trail after about a
> week's delay.
>
> Once I have James 3 in production, I plan to start working on the
> schema for the CONF files.
> Gerry
>
> --------------------------------------------------
> From: "Eric Charles" <er...@apache.org>
> Sent: Tuesday, November 09, 2010 10:35 AM
> To: "James Users List" <se...@james.apache.org>
> Subject: Re: Sending mails always gets relayed denied (not localhost)
>
>> Good.
>> (I will also remove remaining unneeded mailets: check for virus
>> header without running virus scan,...).
>> Tks,
>> Eric
>>
>>
>> On 9/11/2010 19:26, Norman Maurer wrote:
>>> I think we should remove it..
>>>
>>> Bye,
>>> Norman
>>>
>>> 2010/11/9 Eric Charles<er...@apache.org>:
>>>> Hi,
>>>>
>>>> RemoteAddrNotInNetwork is still in the default conf for M2.
>>>> Should we leave it as such and document it or simply remove it.
>>>> The smtp auth being now enabled in smtpserver.xml, the remove
>>>> should not
>>>> arm.
>>>> WDYT?
>>>>
>>>> Eric
>>>>
>>>>
>>>> On 9/11/2010 18:23, Norman Maurer wrote:
>>>>> Hi Craig,
>>>>>
>>>>> make sure you don't have the RemoteAddrNotInNetwork configured in
>>>>> mailetcontainer.xml. This needs to get removed when you use smtp
>>>>> auth.
>>>>>
>>>>> Bye,
>>>>> Norman
>>>>>
>>>>>
>>>>> 2010/11/9 Craig
>>>>> Greenhalgh<cr...@intersoftsolutions.co.uk>:
>>>>>> Hi I have tried this and i get similar results, here is my log:
>>>>>>
>>>>>> The authenication seams to work, "AUTH method PLAIN succeeded"&
>>>>>> "Sender
>>>>>> allowed" but I still get "Storing mail Mail1289320653918-1 in
>>>>>> file://var/mail/relay-denied/"
>>>>>> and nothing is delivered
>>>>>>
>>>>>> Any ideas?
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> Craig
>>>>>>
>>>>>>
>>>>>> DEBUG 16:37:33,622 | james.smtpserver | Lookup command handler for
>>>>>> command:
>>>>>> EHLO
>>>>>> DEBUG 16:37:33,665 | james.smtpserver | Lookup command handler for
>>>>>> command:
>>>>>> AUTH
>>>>>> DEBUG 16:37:33,677 | james.smtpserver | executing hook
>>>>>> org.apache.james.smtpserver.UsersRepositoryAuthHook@109aca82
>>>>>> DEBUG 16:37:33,693 | james.smtpserver | AUTH method PLAIN succeeded
>>>>>> DEBUG 16:37:33,728 | james.smtpserver | Lookup command handler for
>>>>>> command:
>>>>>> MAIL
>>>>>> DEBUG 16:37:33,764 | james.smtpserver | Lookup command handler for
>>>>>> command:
>>>>>> RCPT
>>>>>> DEBUG 16:37:33,765 | james.smtpserver | executing hook
>>>>>> org.apache.james.smtpserver.AuthRequiredToRelayRcptHook
>>>>>> DEBUG 16:37:33,766 | james.smtpserver | executing hook
>>>>>> org.apache.james.smtpserver.SenderAuthIdentifyVerificationRcptHook
>>>>>> DEBUG 16:37:33,771 | james.smtpserver | executing hook
>>>>>> org.apache.james.protocols.smtp.core.PostmasterAbuseRcptHook
>>>>>> DEBUG 16:37:33,771 | james.smtpserver | executing hook
>>>>>> org.apache.james.smtpserver.fastfail.ValidRcptHandler
>>>>>> DEBUG 16:37:33,772 | james.smtpserver | Sender allowed
>>>>>> DEBUG 16:37:33,810 | james.smtpserver | Lookup command handler for
>>>>>> command:
>>>>>> DATA
>>>>>> DEBUG 16:37:33,946 | james.smtpserver | executing james message
>>>>>> handler
>>>>>>
>>>>>> org.apache.james.protocols.smtp.core.esmtp.MailSizeEsmtpExtension@6efde050
>>>>>>
>>>>>> DEBUG 16:37:33,948 | james.smtpserver | executing james message
>>>>>> handler
>>>>>> org.apache.james.smtpserver.AddDefaultAttributesMessageHook@5e4f12c2
>>>>>> DEBUG 16:37:33,949 | james.smtpserver | executing james message
>>>>>> handler
>>>>>> org.apache.james.smtpserver.SendMailHandler@191e0eb
>>>>>> DEBUG 16:37:33,949 | james.smtpserver | sending mail
>>>>>> INFO 16:37:33,977 | james.smtpserver | Successfully spooled mail
>>>>>> Mail1289320653918-1 from test@trouble-ticket.co.uk on 84.9.164.34
>>>>>> for
>>>>>> [Craig.Greenhalgh@IntersoftSolutions.co.uk]
>>>>>> DEBUG 16:37:34,028 | james.smtpserver | Lookup command handler for
>>>>>> command:
>>>>>> QUIT
>>>>>> DEBUG 16:37:34,031 | james.smtpserver | Dispose objects while
>>>>>> closing
>>>>>> channel 1382067420
>>>>>> INFO 16:37:34,354 | james.mailetcontext | Storing mail
>>>>>> Mail1289320653918-1
>>>>>> in file://var/mail/relay-denied/
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 09/11/2010 16:17, Eric Charles wrote:
>>>>>>> Hi Graig,
>>>>>>>
>>>>>>> The following conf file should do the job
>>>>>>>
>>>>>>>
>>>>>>> https://svn.apache.org/repos/asf/james/server/trunk/container-spring/src/main/config/james/smtpserver.xml
>>>>>>>
>>>>>>>
>>>>>>> If you've already tested it and it still does not work, can you
>>>>>>> send the
>>>>>>> log message written in ./log/james-server.log ?
>>>>>>> (You of course have to send with smtp auth enable in your mail
>>>>>>> client,
>>>>>>> james should ask for it).
>>>>>>>
>>>>>>> Tks,
>>>>>>>
>>>>>>> Eric
>>>>>>>
>>>>>>>
>>>>>>> On 9/11/2010 16:49, Craig Greenhalgh wrote:
>>>>>>>> Hi I'm using 3.0M1, I have set up my server and all works fine
>>>>>>>> locally.
>>>>>>>>
>>>>>>>> When I send a mail from a different machine, it always results
>>>>>>>> in this
>>>>>>>> being placed in relay-denied.
>>>>>>>>
>>>>>>>> I have tried all combinations of authRequired and
>>>>>>>> authorizedAddresses
>>>>>>>>
>>>>>>>> Am I missing something stupid?
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> Craig
>>>>>>>>
>>>>>>>>
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>
>>>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>>
>>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>>
>>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>>
>>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>>
>>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>>
>>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>> For additional commands, e-mail: server-user-help@james.apache.org
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org