You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@airavata.apache.org by Jeff <jk...@nd.edu> on 2016/05/10 15:05:53 UTC

WSO2 User Reg Confirmation

I'm finishing up my development environment so I can work on some JIRA 
issues during the remaining community bonding period (GSoC project), and 
am stuck at user confirmation on my local PGA.

After creating an account, the account confirmation email gets sent. 
However, clicking the link in the email does nothing. In 
email-admin-config.xml in my local WSO2, I tried the default link 
(|https://localhost:8443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name} 
<https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>|_&amp;tenantdomain={tenant-domain}_), 
changing the default link t use port 9443 
(|https://localhost:9443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name} 
<https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>|_&amp;tenantdomain={tenant-domain}_), 
and changing to the confirm account view on the PGA 
(_https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation={confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}_), 
but none of these work. Does anyone have any suggestions?

Also, is there a default admin account for the PGA? So far, I haven't 
seen any indication of one, and using the WSO2 tenant admin credentials 
in the PGA doesn't work either.

Best,
Jeff K.

Re: WSO2 User Reg Confirmation

Posted by Jeffery Kinnison <Je...@nd.edu>.
Hi Eroma,

I'm using a local install of WSO2-IS (localhost:9443), and have created a
tenant per the ReadTheDocs instructions. The tenant uses the default domain
(master.airavata) from the ReadTheDocs.

Best,
Jeff K.

On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
eroma.abeysinghe@gmail.com> wrote:

> Hi Jeff,
>
> Did you create a tenant for your PGA? or are you using the default that
> was in PGA_Config?
> Could you please share the identity server URL you are using?
>
> Thanks,
> Eroma
>
> On Tue, May 10, 2016 at 11:05 AM, Jeff <jk...@nd.edu> wrote:
>
>> I'm finishing up my development environment so I can work on some JIRA
>> issues during the remaining community bonding period (GSoC project), and am
>> stuck at user confirmation on my local PGA.
>>
>> After creating an account, the account confirmation email gets sent.
>> However, clicking the link in the email does nothing. In
>> email-admin-config.xml in my local WSO2, I tried the default link (
>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>> {confirmation-code}&amp;userName={user-name}
>> *&amp;tenantdomain={tenant-domain}*), changing the default link t use
>> port 9443 (
>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>> {confirmation-code}&amp;userName={user-name}
>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>> account view on the PGA (*https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>> but none of these work. Does anyone have any suggestions?
>>
>> Also, is there a default admin account for the PGA? So far, I haven't
>> seen any indication of one, and using the WSO2 tenant admin credentials in
>> the PGA doesn't work either.
>>
>> Best,
>> Jeff K.
>>
>
>
>
> --
> Thank You,
> Best Regards,
> Eroma
>

Re: WSO2 User Reg Confirmation

Posted by Suresh Marru <sm...@apache.org>.
Hi Jeff,

After you get through your issues, please try and contribute the corrections or FAQ’s to the docs. The source is here - https://github.com/apache/airavata-docs <https://github.com/apache/airavata-docs>

Suresh

> On May 10, 2016, at 8:35 AM, Jeffery Kinnison <Je...@nd.edu> wrote:
> 
> Hi Eroma,
> 
> Yes, I followed the directions in the ReadTheDocs and set up WSO2-IS as close to this as I could find--I'm using WSO2-IS 5.1.0, and it doesn't look exactly the same as what the ReadTheDocs describes but all of the described settings still exist.
> 
> Best,
> Jeff K.
> 
> 
> 
> 
> 
> On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe <eroma.abeysinghe@gmail.com <ma...@gmail.com>> wrote:
> Hi Jeff,
> 
> If you haven't already got this check this out as well
> http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/ <http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/>
> 
> Thanks,
> Eroma
> 
> On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <eroma.abeysinghe@gmail.com <ma...@gmail.com>> wrote:
> Hi Jeff,
> 
> Did you create a tenant for your PGA? or are you using the default that was in PGA_Config?
> Could you please share the identity server URL you are using?
> 
> Thanks,
> Eroma
> 
> On Tue, May 10, 2016 at 11:05 AM, Jeff <jkinniso@nd.edu <ma...@nd.edu>> wrote:
> I'm finishing up my development environment so I can work on some JIRA issues during the remaining community bonding period (GSoC project), and am stuck at user confirmation on my local PGA.
> 
> After creating an account, the account confirmation email gets sent. However, clicking the link in the email does nothing. In email-admin-config.xml in my local WSO2, I tried the default link ( <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>https://localhost:8443/InfoRecoverySample/confirmReg?confirmation= <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=>{confirmation-code}&amp;userName={user-name}&amp;tenantdomain={tenant-domain}), changing the default link t use port 9443 ( <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>https://localhost:9443/InfoRecoverySample/confirmReg?confirmation= <https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=>{confirmation-code}&amp;userName={user-name}&amp;tenantdomain={tenant-domain}), and changing to the confirm account view on the PGA (https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation= <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}), but none of these work. Does anyone have any suggestions?
> 
> Also, is there a default admin account for the PGA? So far, I haven't seen any indication of one, and using the WSO2 tenant admin credentials in the PGA doesn't work either.
> 
> Best,
> Jeff K.
> 
> 
> 
> -- 
> Thank You,
> Best Regards,
> Eroma
> 
> 
> 
> -- 
> Thank You,
> Best Regards,
> Eroma
> 


Re: WSO2 User Reg Confirmation

Posted by Jeff <jk...@nd.edu>.
And there we go, "Captcha Validation Failed" seems to be the issue. 
Given that there is no Captcha on my create page, I'm guessing that's 
the issue. I haven't seen anything about Captcha in the PGA docs--did I 
miss something?

On 05/10/2016 03:28 PM, Supun Nakandala wrote:
>
> Yes. It gets logged in IS-HOME/repository/logs/wso2carbon.log. can you 
> check what is the error there ?
>
> On May 10, 2016 12:25 PM, "Jeff" <jkinniso@nd.edu 
> <ma...@nd.edu>> wrote:
>
>     Okay, I changed my email configuration in WSO2IS to send http
>     links instead of https, but now I get the message "Account
>     confirmation failed!" every time with no explanation as to why.
>     Would that information be logged anywhere?
>
>     At this point, I'm beginning to wonder if I should just start
>     again from scratch.
>
>     Jeff K.
>
>
>     On 05/10/2016 12:44 PM, Supun Nakandala wrote:
>>     the link shouldn't have :9443 or any other port. It should be set
>>     blank defaulting to port 80 (your web server port). Can you try
>>     the link
>>     http://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>     <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata> in
>>     the email template and retry user creation.
>>
>>     On Tue, May 10, 2016 at 9:32 AM, Jeff <jkinniso@nd.edu
>>     <ma...@nd.edu>> wrote:
>>
>>         Ah, I just got it: https requests aren't going through. I can
>>         access the pages through http protocol, but not https. Any
>>         thoughts on what to do here?
>>
>>
>>         On 05/10/2016 12:22 PM, Supun Nakandala wrote:
>>>         Hi Jeff,
>>>
>>>         Can you send me the url for the home page in your local PGA.
>>>
>>>         On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe
>>>         <eroma.abeysinghe@gmail.com
>>>         <ma...@gmail.com>> wrote:
>>>
>>>             Hi Jeff,
>>>
>>>             Can you try another user registration but first in WSO2
>>>             ID email templates remove the 'public'
>>>             so it should look like
>>>
>>>             https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>>             <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>
>>>             Thanks,
>>>             Eroma
>>>
>>>             On Tue, May 10, 2016 at 12:13 PM, Jeff <jkinniso@nd.edu
>>>             <ma...@nd.edu>> wrote:
>>>
>>>                 Hi Eroma,
>>>
>>>                 Yes to both of those questions. The url looks like
>>>
>>>                 https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>>                 <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>
>>>                 When I clicked this link (when it was first sent), I
>>>                 was told that the server couldn't be found. However,
>>>                 everything is running. That's why I was asking about
>>>                 the url, because I'm not sure that it's actually
>>>                 correct. This points to my PGA installation, and I
>>>                 got the confirm-user-registration part from
>>>                 routes.php in the PGA.
>>>
>>>                 Best,
>>>                 Jeff K.
>>>
>>>
>>>                 On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>>>                 Hi Jeff,
>>>>
>>>>                 Hmmm.....
>>>>                 you might have done this as well...
>>>>                 1. is the link in email correct for account
>>>>                 confirmation? Does it contain your PGA URL?
>>>>                 2. Can you log into your WSO2 using tenant username
>>>>                 and password?
>>>>
>>>>                 Hope my questions would help.
>>>>
>>>>                 Thanks,
>>>>                 Eroma
>>>>
>>>>
>>>>
>>>>                 \u200b
>>>>
>>>>                 On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison
>>>>                 <Jeffery.D.Kinnison.1@nd.edu
>>>>                 <ma...@nd.edu>> wrote:
>>>>
>>>>                     Hi Eroma,
>>>>
>>>>                     Yes, I followed the directions in the
>>>>                     ReadTheDocs and set up WSO2-IS as close to this
>>>>                     as I could find--I'm using WSO2-IS 5.1.0, and
>>>>                     it doesn't look exactly the same as what the
>>>>                     ReadTheDocs describes but all of the described
>>>>                     settings still exist.
>>>>
>>>>                     Best,
>>>>                     Jeff K.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>                     On Tue, May 10, 2016 at 11:24 AM, Eroma
>>>>                     Abeysinghe <eroma.abeysinghe@gmail.com
>>>>                     <ma...@gmail.com>> wrote:
>>>>
>>>>                         Hi Jeff,
>>>>
>>>>                         If you haven't already got this check this
>>>>                         out as well
>>>>                         http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>>
>>>>                         Thanks,
>>>>                         Eroma
>>>>
>>>>                         On Tue, May 10, 2016 at 11:20 AM, Eroma
>>>>                         Abeysinghe <eroma.abeysinghe@gmail.com
>>>>                         <ma...@gmail.com>> wrote:
>>>>
>>>>                             Hi Jeff,
>>>>
>>>>                             Did you create a tenant for your PGA?
>>>>                             or are you using the default that was
>>>>                             in PGA_Config?
>>>>                             Could you please share the identity
>>>>                             server URL you are using?
>>>>
>>>>                             Thanks,
>>>>                             Eroma
>>>>
>>>>                             On Tue, May 10, 2016 at 11:05 AM, Jeff
>>>>                             <jkinniso@nd.edu
>>>>                             <ma...@nd.edu>> wrote:
>>>>
>>>>                                 I'm finishing up my development
>>>>                                 environment so I can work on some
>>>>                                 JIRA issues during the remaining
>>>>                                 community bonding period (GSoC
>>>>                                 project), and am stuck at user
>>>>                                 confirmation on my local PGA.
>>>>
>>>>                                 After creating an account, the
>>>>                                 account confirmation email gets
>>>>                                 sent. However, clicking the link in
>>>>                                 the email does nothing. In
>>>>                                 email-admin-config.xml in my local
>>>>                                 WSO2, I tried the default link
>>>>                                 (|https://localhost:8443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>>>                                 changing the default link t use
>>>>                                 port 9443
>>>>                                 (|https://localhost:9443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>>>                                 and changing to the confirm account
>>>>                                 view on the PGA
>>>>                                 (_https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation={confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}_),
>>>>                                 but none of these work. Does anyone
>>>>                                 have any suggestions?
>>>>
>>>>                                 Also, is there a default admin
>>>>                                 account for the PGA? So far, I
>>>>                                 haven't seen any indication of one,
>>>>                                 and using the WSO2 tenant admin
>>>>                                 credentials in the PGA doesn't work
>>>>                                 either.
>>>>
>>>>                                 Best,
>>>>                                 Jeff K.
>>>>
>>>>
>>>>
>>>>
>>>>                             -- 
>>>>                             Thank You,
>>>>                             Best Regards,
>>>>                             Eroma
>>>>
>>>>
>>>>
>>>>
>>>>                         -- 
>>>>                         Thank You,
>>>>                         Best Regards,
>>>>                         Eroma
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>                 -- 
>>>>                 Thank You,
>>>>                 Best Regards,
>>>>                 Eroma
>>>
>>>
>>>
>>>
>>>             -- 
>>>             Thank You,
>>>             Best Regards,
>>>             Eroma
>>>
>>>
>>>
>>>
>>>         -- 
>>>         Thank you
>>>         Supun Nakandala
>>>         Dept. Computer Science and Engineering
>>>         University of Moratuwa
>>
>>
>>
>>
>>     -- 
>>     Thank you
>>     Supun Nakandala
>>     Dept. Computer Science and Engineering
>>     University of Moratuwa
>


Re: WSO2 User Reg Confirmation

Posted by Jeff <jk...@nd.edu>.
Sure. Confirmation seems to be working now, I just can't log in with the 
confirmed accounts. I get a second email (at the admin email address) 
saying that the new account was created after clicking the link in the 
confirmation email.

ID: [-1] [] [2016-05-11 08:39:29,516]  WARN 
{org.apache.directory.shared.asn1.ber.Asn1Decoder} -  The PDU has been 
fully decoded but there are still bytes in the buffer.
TID: [-1234] [] [2016-05-11 08:39:29,521]  INFO 
{org.wso2.carbon.user.core.ldap.ReadWriteLDAPUserStoreManager} - LDAP 
connection created successfully in read-write mode
TID: [1] [] [2016-05-11 08:39:29,595] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.core.services.util.CarbonAuthenticationUtil} - 
'master@master.airavata [1]' logged in at [2016-05-11 08:39:29,594-0400]
TID: [1] [] [2016-05-11 08:39:29,604] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.core.multitenancy.TenantAxisConfigurator} -  
Creating tenant AxisConfiguration for tenant: master.airavata[1]
TID: [1] [] [2016-05-11 08:39:29,650] master@master.airavata [1] [IS] 
INFO 
{org.wso2.carbon.identity.user.store.configuration.deployer.UserStoreConfigurationDeployer} 
-  User Store Configuration Deployer initiated.
TID: [1] [] [2016-05-11 08:39:29,651] master@master.airavata [1] [IS] 
INFO 
{org.wso2.carbon.identity.user.store.configuration.deployer.UserStoreConfigurationDeployer} 
-  User Store Configuration Deployer initiated.
TID: [1] [] [2016-05-11 08:39:29,651] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.bpel.deployer.BPELDeployer} - Initializing BPEL 
Deployer for tenant 1.
TID: [1] [] [2016-05-11 08:39:29,652] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.humantask.deployer.HumanTaskDeployer} - 
Initializing HumanTask Deployer for tenant 1.
TID: [1] [] [2016-05-11 08:39:29,678] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.core.internal.permission.update.PermissionUpdater} 
-  Permission cache updated for tenant 1
TID: [1] [] [2016-05-11 08:39:29,693] @master.airavata [1] [IS] INFO 
{org.wso2.carbon.core.deployment.DeploymentInterceptor} -  Deploying 
Axis2 service: wso2carbon-sts {master.airavata[1]}
TID: [1] [] [2016-05-11 08:39:29,706] master@master.airavata [1] [IS] 
INFO {org.apache.axis2.deployment.DeploymentEngine} - Deploying Web 
service: org.wso2.carbon.sts -
TID: [1] [] [2016-05-11 08:39:29,708] @master.airavata [1] [IS] INFO 
{org.wso2.carbon.core.deployment.DeploymentInterceptor} -  Deploying 
Axis2 service: wso2carbon-sts {master.airavata[1]}
TID: [1] [] [2016-05-11 08:39:29,716] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.core.multitenancy.utils.TenantAxisUtils} -  Loaded 
tenant master.airavata in 118 ms
TID: [1] [] [2016-05-11 08:39:29,847] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.core.services.util.CarbonAuthenticationUtil} - 
'master@master.airavata [1]' logged in at [2016-05-11 08:39:29,847-0400]
TID: [1] [] [2016-05-11 08:39:30,058] @master.airavata [1] [IS] INFO 
{org.wso2.carbon.identity.mgt.mail.DefaultEmailSendingModule} - Sending 
user credentials configuration mail to jkinniso@nd.edu
TID: [-1] [] [2016-05-11 08:39:30,103]  WARN 
{org.apache.directory.shared.asn1.ber.Asn1Decoder} -  The PDU has been 
fully decoded but there are still bytes in the buffer.
TID: [1] [] [2016-05-11 08:39:32,350] @master.airavata [1] [IS] INFO 
{org.wso2.carbon.identity.mgt.mail.DefaultEmailSendingModule} - User 
credentials configuration mail has been sent to jkinniso@nd.edu
TID: [1] [] [2016-05-11 08:40:37,196] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.core.services.util.CarbonAuthenticationUtil} - 
'master@master.airavata [1]' logged in at [2016-05-11 08:40:37,196-0400]
TID: [1] [] [2016-05-11 08:40:37,382] master@master.airavata [1] [IS] 
INFO {org.wso2.carbon.core.services.util.CarbonAuthenticationUtil} - 
'master@master.airavata [1]' logged in at [2016-05-11 08:40:37,382-0400]


On 05/11/2016 01:40 AM, Supun Nakandala wrote:
> Hi Jeff,
>
> Can you share last few lines in your wso2carbon.log file.
>
> On Tue, May 10, 2016 at 1:20 PM, Jeff <jkinniso@nd.edu 
> <ma...@nd.edu>> wrote:
>
>     Okay, so by setting Captcha.Verification.Internally.Managed=false
>     in <WSO2_home>/repository/conf/identity/identity-mgt.properties, I
>     was able to get around the "Captcha validation failed!" issue.
>
>     However, I can't log in with this account now, and the user didn't
>     seem to be created. I just tried again with the same result. So
>     the conundrum is now this: I can create users without Captcha but
>     can't log them in, or I can use Captach and run into the issue
>     where new users can't be created.
>
>     Jeff K.
>
>     On 05/10/2016 03:28 PM, Supun Nakandala wrote:
>>
>>     Yes. It gets logged in IS-HOME/repository/logs/wso2carbon.log.
>>     can you check what is the error there ?
>>
>>     On May 10, 2016 12:25 PM, "Jeff" <jkinniso@nd.edu
>>     <ma...@nd.edu>> wrote:
>>
>>         Okay, I changed my email configuration in WSO2IS to send http
>>         links instead of https, but now I get the message "Account
>>         confirmation failed!" every time with no explanation as to
>>         why. Would that information be logged anywhere?
>>
>>         At this point, I'm beginning to wonder if I should just start
>>         again from scratch.
>>
>>         Jeff K.
>>
>>
>>         On 05/10/2016 12:44 PM, Supun Nakandala wrote:
>>>         the link shouldn't have :9443 or any other port. It should
>>>         be set blank defaulting to port 80 (your web server port).
>>>         Can you try the link
>>>         http://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>>         <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata> in
>>>         the email template and retry user creation.
>>>
>>>         On Tue, May 10, 2016 at 9:32 AM, Jeff <jkinniso@nd.edu
>>>         <ma...@nd.edu>> wrote:
>>>
>>>             Ah, I just got it: https requests aren't going through.
>>>             I can access the pages through http protocol, but not
>>>             https. Any thoughts on what to do here?
>>>
>>>
>>>             On 05/10/2016 12:22 PM, Supun Nakandala wrote:
>>>>             Hi Jeff,
>>>>
>>>>             Can you send me the url for the home page in your local
>>>>             PGA.
>>>>
>>>>             On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe
>>>>             <eroma.abeysinghe@gmail.com
>>>>             <ma...@gmail.com>> wrote:
>>>>
>>>>                 Hi Jeff,
>>>>
>>>>                 Can you try another user registration but first in
>>>>                 WSO2 ID email templates remove the 'public'
>>>>                 so it should look like
>>>>
>>>>                 https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>>>                 <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>>
>>>>                 Thanks,
>>>>                 Eroma
>>>>
>>>>                 On Tue, May 10, 2016 at 12:13 PM, Jeff
>>>>                 <jkinniso@nd.edu <ma...@nd.edu>> wrote:
>>>>
>>>>                     Hi Eroma,
>>>>
>>>>                     Yes to both of those questions. The url looks like
>>>>
>>>>                     https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>>>                     <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>>
>>>>                     When I clicked this link (when it was first
>>>>                     sent), I was told that the server couldn't be
>>>>                     found. However, everything is running. That's
>>>>                     why I was asking about the url, because I'm not
>>>>                     sure that it's actually correct. This points to
>>>>                     my PGA installation, and I got the
>>>>                     confirm-user-registration part from routes.php
>>>>                     in the PGA.
>>>>
>>>>                     Best,
>>>>                     Jeff K.
>>>>
>>>>
>>>>                     On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>>>>                     Hi Jeff,
>>>>>
>>>>>                     Hmmm.....
>>>>>                     you might have done this as well...
>>>>>                     1. is the link in email correct for account
>>>>>                     confirmation? Does it contain your PGA URL?
>>>>>                     2. Can you log into your WSO2 using tenant
>>>>>                     username and password?
>>>>>
>>>>>                     Hope my questions would help.
>>>>>
>>>>>                     Thanks,
>>>>>                     Eroma
>>>>>
>>>>>
>>>>>
>>>>>                     \u200b
>>>>>
>>>>>                     On Tue, May 10, 2016 at 11:35 AM, Jeffery
>>>>>                     Kinnison <Jeffery.D.Kinnison.1@nd.edu
>>>>>                     <ma...@nd.edu>> wrote:
>>>>>
>>>>>                         Hi Eroma,
>>>>>
>>>>>                         Yes, I followed the directions in the
>>>>>                         ReadTheDocs and set up WSO2-IS as close to
>>>>>                         this as I could find--I'm using WSO2-IS
>>>>>                         5.1.0, and it doesn't look exactly the
>>>>>                         same as what the ReadTheDocs describes but
>>>>>                         all of the described settings still exist.
>>>>>
>>>>>                         Best,
>>>>>                         Jeff K.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>                         On Tue, May 10, 2016 at 11:24 AM, Eroma
>>>>>                         Abeysinghe <eroma.abeysinghe@gmail.com
>>>>>                         <ma...@gmail.com>> wrote:
>>>>>
>>>>>                             Hi Jeff,
>>>>>
>>>>>                             If you haven't already got this check
>>>>>                             this out as well
>>>>>                             http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>>>
>>>>>                             Thanks,
>>>>>                             Eroma
>>>>>
>>>>>                             On Tue, May 10, 2016 at 11:20 AM,
>>>>>                             Eroma Abeysinghe
>>>>>                             <eroma.abeysinghe@gmail.com
>>>>>                             <ma...@gmail.com>>
>>>>>                             wrote:
>>>>>
>>>>>                                 Hi Jeff,
>>>>>
>>>>>                                 Did you create a tenant for your
>>>>>                                 PGA? or are you using the default
>>>>>                                 that was in PGA_Config?
>>>>>                                 Could you please share the
>>>>>                                 identity server URL you are using?
>>>>>
>>>>>                                 Thanks,
>>>>>                                 Eroma
>>>>>
>>>>>                                 On Tue, May 10, 2016 at 11:05 AM,
>>>>>                                 Jeff <jkinniso@nd.edu
>>>>>                                 <ma...@nd.edu>> wrote:
>>>>>
>>>>>                                     I'm finishing up my
>>>>>                                     development environment so I
>>>>>                                     can work on some JIRA issues
>>>>>                                     during the remaining community
>>>>>                                     bonding period (GSoC project),
>>>>>                                     and am stuck at user
>>>>>                                     confirmation on my local PGA.
>>>>>
>>>>>                                     After creating an account, the
>>>>>                                     account confirmation email
>>>>>                                     gets sent. However, clicking
>>>>>                                     the link in the email does
>>>>>                                     nothing. In
>>>>>                                     email-admin-config.xml in my
>>>>>                                     local WSO2, I tried the
>>>>>                                     default link
>>>>>                                     (|https://localhost:8443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>>>>                                     changing the default link t
>>>>>                                     use port 9443
>>>>>                                     (|https://localhost:9443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>>>>                                     and changing to the confirm
>>>>>                                     account view on the PGA
>>>>>                                     (_https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation={confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}_),
>>>>>                                     but none of these work. Does
>>>>>                                     anyone have any suggestions?
>>>>>
>>>>>                                     Also, is there a default admin
>>>>>                                     account for the PGA? So far, I
>>>>>                                     haven't seen any indication of
>>>>>                                     one, and using the WSO2 tenant
>>>>>                                     admin credentials in the PGA
>>>>>                                     doesn't work either.
>>>>>
>>>>>                                     Best,
>>>>>                                     Jeff K.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>                                 -- 
>>>>>                                 Thank You,
>>>>>                                 Best Regards,
>>>>>                                 Eroma
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>                             -- 
>>>>>                             Thank You,
>>>>>                             Best Regards,
>>>>>                             Eroma
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>                     -- 
>>>>>                     Thank You,
>>>>>                     Best Regards,
>>>>>                     Eroma
>>>>
>>>>
>>>>
>>>>
>>>>                 -- 
>>>>                 Thank You,
>>>>                 Best Regards,
>>>>                 Eroma
>>>>
>>>>
>>>>
>>>>
>>>>             -- 
>>>>             Thank you
>>>>             Supun Nakandala
>>>>             Dept. Computer Science and Engineering
>>>>             University of Moratuwa
>>>
>>>
>>>
>>>
>>>         -- 
>>>         Thank you
>>>         Supun Nakandala
>>>         Dept. Computer Science and Engineering
>>>         University of Moratuwa
>>
>
>
>
>
> -- 
> Thank you
> Supun Nakandala
> Dept. Computer Science and Engineering
> University of Moratuwa


Re: WSO2 User Reg Confirmation

Posted by Supun Nakandala <su...@gmail.com>.
Hi Jeff,

Can you share last few lines in your wso2carbon.log file.

On Tue, May 10, 2016 at 1:20 PM, Jeff <jk...@nd.edu> wrote:

> Okay, so by setting Captcha.Verification.Internally.Managed=false in
> <WSO2_home>/repository/conf/identity/identity-mgt.properties, I was able to
> get around the "Captcha validation failed!" issue.
>
> However, I can't log in with this account now, and the user didn't seem to
> be created. I just tried again with the same result. So the conundrum is
> now this: I can create users without Captcha but can't log them in, or I
> can use Captach and run into the issue where new users can't be created.
>
> Jeff K.
>
> On 05/10/2016 03:28 PM, Supun Nakandala wrote:
>
> Yes. It gets logged in IS-HOME/repository/logs/wso2carbon.log. can you
> check what is the error there ?
> On May 10, 2016 12:25 PM, "Jeff" < <jk...@nd.edu>
> wrote:
>
> Okay, I changed my email configuration in WSO2IS to send http links
> instead of https, but now I get the message "Account confirmation failed!"
> every time with no explanation as to why. Would that information be logged
> anywhere?
>
> At this point, I'm beginning to wonder if I should just start again from
> scratch.
>
> Jeff K.
>
>
> On 05/10/2016 12:44 PM, Supun Nakandala wrote:
>
> the link shouldn't have :9443 or any other port. It should be set blank
> defaulting to port 80 (your web server port). Can you try the link
> http://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata> in
> the email template and retry user creation.
>
> On Tue, May 10, 2016 at 9:32 AM, Jeff < <jk...@nd.edu>
> wrote:
>
>> Ah, I just got it: https requests aren't going through. I can access the
>> pages through http protocol, but not https. Any thoughts on what to do
>> here?
>>
>>
>> On 05/10/2016 12:22 PM, Supun Nakandala wrote:
>>
>> Hi Jeff,
>>
>> Can you send me the url for the home page in your local PGA.
>>
>> On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe <
>> <er...@gmail.com> wrote:
>>
>>> Hi Jeff,
>>>
>>> Can you try another user registration but first in WSO2 ID email
>>> templates remove the 'public'
>>> so it should look like
>>>
>>> https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>
>>> Thanks,
>>> Eroma
>>>
>>> On Tue, May 10, 2016 at 12:13 PM, Jeff < <jk...@nd.edu>
>>> jkinniso@nd.edu> wrote:
>>>
>>>> Hi Eroma,
>>>>
>>>> Yes to both of those questions. The url looks like
>>>>
>>>> https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>>
>>>> When I clicked this link (when it was first sent), I was told that the
>>>> server couldn't be found. However, everything is running. That's why I was
>>>> asking about the url, because I'm not sure that it's actually correct. This
>>>> points to my PGA installation, and I got the confirm-user-registration part
>>>> from routes.php in the PGA.
>>>>
>>>> Best,
>>>> Jeff K.
>>>>
>>>>
>>>> On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>>>
>>>> Hi Jeff,
>>>>
>>>> Hmmm.....
>>>> you might have done this as well...
>>>> 1. is the link in email correct for account confirmation? Does it
>>>> contain your PGA URL?
>>>> 2. Can you log into your WSO2 using tenant username and password?
>>>>
>>>> Hope my questions would help.
>>>>
>>>> Thanks,
>>>> Eroma
>>>>
>>>>
>>>>
>>>> ​
>>>>
>>>> On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison <
>>>> <Je...@nd.edu> wrote:
>>>>
>>>>> Hi Eroma,
>>>>>
>>>>> Yes, I followed the directions in the ReadTheDocs and set up WSO2-IS
>>>>> as close to this as I could find--I'm using WSO2-IS 5.1.0, and it doesn't
>>>>> look exactly the same as what the ReadTheDocs describes but all of the
>>>>> described settings still exist.
>>>>>
>>>>> Best,
>>>>> Jeff K.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe <
>>>>> <er...@gmail.com> wrote:
>>>>>
>>>>>> Hi Jeff,
>>>>>>
>>>>>> If you haven't already got this check this out as well
>>>>>> <http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/>
>>>>>> http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>>>>
>>>>>> Thanks,
>>>>>> Eroma
>>>>>>
>>>>>> On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
>>>>>> <er...@gmail.com> wrote:
>>>>>>
>>>>>>> Hi Jeff,
>>>>>>>
>>>>>>> Did you create a tenant for your PGA? or are you using the default
>>>>>>> that was in PGA_Config?
>>>>>>> Could you please share the identity server URL you are using?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Eroma
>>>>>>>
>>>>>>> On Tue, May 10, 2016 at 11:05 AM, Jeff < <jk...@nd.edu>
>>>>>>> jkinniso@nd.edu> wrote:
>>>>>>>
>>>>>>>> I'm finishing up my development environment so I can work on some
>>>>>>>> JIRA issues during the remaining community bonding period (GSoC project),
>>>>>>>> and am stuck at user confirmation on my local PGA.
>>>>>>>>
>>>>>>>> After creating an account, the account confirmation email gets
>>>>>>>> sent. However, clicking the link in the email does nothing. In
>>>>>>>> email-admin-config.xml in my local WSO2, I tried the default link (
>>>>>>>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=>
>>>>>>>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>>>>>>>> {confirmation-code}&amp;userName={user-name}
>>>>>>>> *&amp;tenantdomain={tenant-domain}*), changing the default link t
>>>>>>>> use port 9443 (
>>>>>>>> <https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=>
>>>>>>>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>>>>>>>> {confirmation-code}&amp;userName={user-name}
>>>>>>>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>>>>>>>> account view on the PGA (*https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>>>>>>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>>>>>>>> but none of these work. Does anyone have any suggestions?
>>>>>>>>
>>>>>>>> Also, is there a default admin account for the PGA? So far, I
>>>>>>>> haven't seen any indication of one, and using the WSO2 tenant admin
>>>>>>>> credentials in the PGA doesn't work either.
>>>>>>>>
>>>>>>>> Best,
>>>>>>>> Jeff K.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Thank You,
>>>>>>> Best Regards,
>>>>>>> Eroma
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Thank You,
>>>>>> Best Regards,
>>>>>> Eroma
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Thank You,
>>>> Best Regards,
>>>> Eroma
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Thank You,
>>> Best Regards,
>>> Eroma
>>>
>>
>>
>>
>> --
>> Thank you
>> Supun Nakandala
>> Dept. Computer Science and Engineering
>> University of Moratuwa
>>
>>
>>
>
>
> --
> Thank you
> Supun Nakandala
> Dept. Computer Science and Engineering
> University of Moratuwa
>
>
>
>


-- 
Thank you
Supun Nakandala
Dept. Computer Science and Engineering
University of Moratuwa

Re: WSO2 User Reg Confirmation

Posted by Jeff <jk...@nd.edu>.
Okay, so by setting Captcha.Verification.Internally.Managed=false in 
<WSO2_home>/repository/conf/identity/identity-mgt.properties, I was able 
to get around the "Captcha validation failed!" issue.

However, I can't log in with this account now, and the user didn't seem 
to be created. I just tried again with the same result. So the conundrum 
is now this: I can create users without Captcha but can't log them in, 
or I can use Captach and run into the issue where new users can't be 
created.

Jeff K.

On 05/10/2016 03:28 PM, Supun Nakandala wrote:
>
> Yes. It gets logged in IS-HOME/repository/logs/wso2carbon.log. can you 
> check what is the error there ?
>
> On May 10, 2016 12:25 PM, "Jeff" <jkinniso@nd.edu 
> <ma...@nd.edu>> wrote:
>
>     Okay, I changed my email configuration in WSO2IS to send http
>     links instead of https, but now I get the message "Account
>     confirmation failed!" every time with no explanation as to why.
>     Would that information be logged anywhere?
>
>     At this point, I'm beginning to wonder if I should just start
>     again from scratch.
>
>     Jeff K.
>
>
>     On 05/10/2016 12:44 PM, Supun Nakandala wrote:
>>     the link shouldn't have :9443 or any other port. It should be set
>>     blank defaulting to port 80 (your web server port). Can you try
>>     the link
>>     http://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>     <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata> in
>>     the email template and retry user creation.
>>
>>     On Tue, May 10, 2016 at 9:32 AM, Jeff <jkinniso@nd.edu
>>     <ma...@nd.edu>> wrote:
>>
>>         Ah, I just got it: https requests aren't going through. I can
>>         access the pages through http protocol, but not https. Any
>>         thoughts on what to do here?
>>
>>
>>         On 05/10/2016 12:22 PM, Supun Nakandala wrote:
>>>         Hi Jeff,
>>>
>>>         Can you send me the url for the home page in your local PGA.
>>>
>>>         On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe
>>>         <eroma.abeysinghe@gmail.com
>>>         <ma...@gmail.com>> wrote:
>>>
>>>             Hi Jeff,
>>>
>>>             Can you try another user registration but first in WSO2
>>>             ID email templates remove the 'public'
>>>             so it should look like
>>>
>>>             https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>>             <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>
>>>             Thanks,
>>>             Eroma
>>>
>>>             On Tue, May 10, 2016 at 12:13 PM, Jeff <jkinniso@nd.edu
>>>             <ma...@nd.edu>> wrote:
>>>
>>>                 Hi Eroma,
>>>
>>>                 Yes to both of those questions. The url looks like
>>>
>>>                 https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>>                 <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>
>>>                 When I clicked this link (when it was first sent), I
>>>                 was told that the server couldn't be found. However,
>>>                 everything is running. That's why I was asking about
>>>                 the url, because I'm not sure that it's actually
>>>                 correct. This points to my PGA installation, and I
>>>                 got the confirm-user-registration part from
>>>                 routes.php in the PGA.
>>>
>>>                 Best,
>>>                 Jeff K.
>>>
>>>
>>>                 On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>>>                 Hi Jeff,
>>>>
>>>>                 Hmmm.....
>>>>                 you might have done this as well...
>>>>                 1. is the link in email correct for account
>>>>                 confirmation? Does it contain your PGA URL?
>>>>                 2. Can you log into your WSO2 using tenant username
>>>>                 and password?
>>>>
>>>>                 Hope my questions would help.
>>>>
>>>>                 Thanks,
>>>>                 Eroma
>>>>
>>>>
>>>>
>>>>                 \u200b
>>>>
>>>>                 On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison
>>>>                 <Jeffery.D.Kinnison.1@nd.edu
>>>>                 <ma...@nd.edu>> wrote:
>>>>
>>>>                     Hi Eroma,
>>>>
>>>>                     Yes, I followed the directions in the
>>>>                     ReadTheDocs and set up WSO2-IS as close to this
>>>>                     as I could find--I'm using WSO2-IS 5.1.0, and
>>>>                     it doesn't look exactly the same as what the
>>>>                     ReadTheDocs describes but all of the described
>>>>                     settings still exist.
>>>>
>>>>                     Best,
>>>>                     Jeff K.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>                     On Tue, May 10, 2016 at 11:24 AM, Eroma
>>>>                     Abeysinghe <eroma.abeysinghe@gmail.com
>>>>                     <ma...@gmail.com>> wrote:
>>>>
>>>>                         Hi Jeff,
>>>>
>>>>                         If you haven't already got this check this
>>>>                         out as well
>>>>                         http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>>
>>>>                         Thanks,
>>>>                         Eroma
>>>>
>>>>                         On Tue, May 10, 2016 at 11:20 AM, Eroma
>>>>                         Abeysinghe <eroma.abeysinghe@gmail.com
>>>>                         <ma...@gmail.com>> wrote:
>>>>
>>>>                             Hi Jeff,
>>>>
>>>>                             Did you create a tenant for your PGA?
>>>>                             or are you using the default that was
>>>>                             in PGA_Config?
>>>>                             Could you please share the identity
>>>>                             server URL you are using?
>>>>
>>>>                             Thanks,
>>>>                             Eroma
>>>>
>>>>                             On Tue, May 10, 2016 at 11:05 AM, Jeff
>>>>                             <jkinniso@nd.edu
>>>>                             <ma...@nd.edu>> wrote:
>>>>
>>>>                                 I'm finishing up my development
>>>>                                 environment so I can work on some
>>>>                                 JIRA issues during the remaining
>>>>                                 community bonding period (GSoC
>>>>                                 project), and am stuck at user
>>>>                                 confirmation on my local PGA.
>>>>
>>>>                                 After creating an account, the
>>>>                                 account confirmation email gets
>>>>                                 sent. However, clicking the link in
>>>>                                 the email does nothing. In
>>>>                                 email-admin-config.xml in my local
>>>>                                 WSO2, I tried the default link
>>>>                                 (|https://localhost:8443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>>>                                 changing the default link t use
>>>>                                 port 9443
>>>>                                 (|https://localhost:9443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>>>                                 and changing to the confirm account
>>>>                                 view on the PGA
>>>>                                 (_https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation={confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}_),
>>>>                                 but none of these work. Does anyone
>>>>                                 have any suggestions?
>>>>
>>>>                                 Also, is there a default admin
>>>>                                 account for the PGA? So far, I
>>>>                                 haven't seen any indication of one,
>>>>                                 and using the WSO2 tenant admin
>>>>                                 credentials in the PGA doesn't work
>>>>                                 either.
>>>>
>>>>                                 Best,
>>>>                                 Jeff K.
>>>>
>>>>
>>>>
>>>>
>>>>                             -- 
>>>>                             Thank You,
>>>>                             Best Regards,
>>>>                             Eroma
>>>>
>>>>
>>>>
>>>>
>>>>                         -- 
>>>>                         Thank You,
>>>>                         Best Regards,
>>>>                         Eroma
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>                 -- 
>>>>                 Thank You,
>>>>                 Best Regards,
>>>>                 Eroma
>>>
>>>
>>>
>>>
>>>             -- 
>>>             Thank You,
>>>             Best Regards,
>>>             Eroma
>>>
>>>
>>>
>>>
>>>         -- 
>>>         Thank you
>>>         Supun Nakandala
>>>         Dept. Computer Science and Engineering
>>>         University of Moratuwa
>>
>>
>>
>>
>>     -- 
>>     Thank you
>>     Supun Nakandala
>>     Dept. Computer Science and Engineering
>>     University of Moratuwa
>


Re: WSO2 User Reg Confirmation

Posted by Supun Nakandala <su...@gmail.com>.
Yes. It gets logged in IS-HOME/repository/logs/wso2carbon.log. can you
check what is the error there ?
On May 10, 2016 12:25 PM, "Jeff" <jk...@nd.edu> wrote:

Okay, I changed my email configuration in WSO2IS to send http links instead
of https, but now I get the message "Account confirmation failed!" every
time with no explanation as to why. Would that information be logged
anywhere?

At this point, I'm beginning to wonder if I should just start again from
scratch.

Jeff K.


On 05/10/2016 12:44 PM, Supun Nakandala wrote:

the link shouldn't have :9443 or any other port. It should be set blank
defaulting to port 80 (your web server port). Can you try the link
http://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
<https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
in
the email template and retry user creation.

On Tue, May 10, 2016 at 9:32 AM, Jeff <jk...@nd.edu> wrote:

> Ah, I just got it: https requests aren't going through. I can access the
> pages through http protocol, but not https. Any thoughts on what to do
> here?
>
>
> On 05/10/2016 12:22 PM, Supun Nakandala wrote:
>
> Hi Jeff,
>
> Can you send me the url for the home page in your local PGA.
>
> On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe <
> eroma.abeysinghe@gmail.com> wrote:
>
>> Hi Jeff,
>>
>> Can you try another user registration but first in WSO2 ID email
>> templates remove the 'public'
>> so it should look like
>>
>> https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>
>> Thanks,
>> Eroma
>>
>> On Tue, May 10, 2016 at 12:13 PM, Jeff <jk...@nd.edu> wrote:
>>
>>> Hi Eroma,
>>>
>>> Yes to both of those questions. The url looks like
>>>
>>> https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>
>>> When I clicked this link (when it was first sent), I was told that the
>>> server couldn't be found. However, everything is running. That's why I was
>>> asking about the url, because I'm not sure that it's actually correct. This
>>> points to my PGA installation, and I got the confirm-user-registration part
>>> from routes.php in the PGA.
>>>
>>> Best,
>>> Jeff K.
>>>
>>>
>>> On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>>
>>> Hi Jeff,
>>>
>>> Hmmm.....
>>> you might have done this as well...
>>> 1. is the link in email correct for account confirmation? Does it
>>> contain your PGA URL?
>>> 2. Can you log into your WSO2 using tenant username and password?
>>>
>>> Hope my questions would help.
>>>
>>> Thanks,
>>> Eroma
>>>
>>>
>>>
>>> ​
>>>
>>> On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison <
>>> Jeffery.D.Kinnison.1@nd.edu> wrote:
>>>
>>>> Hi Eroma,
>>>>
>>>> Yes, I followed the directions in the ReadTheDocs and set up WSO2-IS as
>>>> close to this as I could find--I'm using WSO2-IS 5.1.0, and it doesn't look
>>>> exactly the same as what the ReadTheDocs describes but all of the described
>>>> settings still exist.
>>>>
>>>> Best,
>>>> Jeff K.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe <
>>>> eroma.abeysinghe@gmail.com> wrote:
>>>>
>>>>> Hi Jeff,
>>>>>
>>>>> If you haven't already got this check this out as well
>>>>> http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>>>
>>>>> Thanks,
>>>>> Eroma
>>>>>
>>>>> On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
>>>>> eroma.abeysinghe@gmail.com> wrote:
>>>>>
>>>>>> Hi Jeff,
>>>>>>
>>>>>> Did you create a tenant for your PGA? or are you using the default
>>>>>> that was in PGA_Config?
>>>>>> Could you please share the identity server URL you are using?
>>>>>>
>>>>>> Thanks,
>>>>>> Eroma
>>>>>>
>>>>>> On Tue, May 10, 2016 at 11:05 AM, Jeff <jk...@nd.edu> wrote:
>>>>>>
>>>>>>> I'm finishing up my development environment so I can work on some
>>>>>>> JIRA issues during the remaining community bonding period (GSoC project),
>>>>>>> and am stuck at user confirmation on my local PGA.
>>>>>>>
>>>>>>> After creating an account, the account confirmation email gets sent.
>>>>>>> However, clicking the link in the email does nothing. In
>>>>>>> email-admin-config.xml in my local WSO2, I tried the default link (
>>>>>>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>>>>>>> {confirmation-code}&amp;userName={user-name}
>>>>>>> *&amp;tenantdomain={tenant-domain}*), changing the default link t
>>>>>>> use port 9443 (
>>>>>>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>>>>>>> {confirmation-code}&amp;userName={user-name}
>>>>>>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>>>>>>> account view on the PGA (*https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>>>>>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>>>>>>> but none of these work. Does anyone have any suggestions?
>>>>>>>
>>>>>>> Also, is there a default admin account for the PGA? So far, I
>>>>>>> haven't seen any indication of one, and using the WSO2 tenant admin
>>>>>>> credentials in the PGA doesn't work either.
>>>>>>>
>>>>>>> Best,
>>>>>>> Jeff K.
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Thank You,
>>>>>> Best Regards,
>>>>>> Eroma
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Thank You,
>>>>> Best Regards,
>>>>> Eroma
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Thank You,
>>> Best Regards,
>>> Eroma
>>>
>>>
>>>
>>
>>
>> --
>> Thank You,
>> Best Regards,
>> Eroma
>>
>
>
>
> --
> Thank you
> Supun Nakandala
> Dept. Computer Science and Engineering
> University of Moratuwa
>
>
>


-- 
Thank you
Supun Nakandala
Dept. Computer Science and Engineering
University of Moratuwa

Re: WSO2 User Reg Confirmation

Posted by Jeff <jk...@nd.edu>.
Okay, I changed my email configuration in WSO2IS to send http links 
instead of https, but now I get the message "Account confirmation 
failed!" every time with no explanation as to why. Would that 
information be logged anywhere?

At this point, I'm beginning to wonder if I should just start again from 
scratch.

Jeff K.

On 05/10/2016 12:44 PM, Supun Nakandala wrote:
> the link shouldn't have :9443 or any other port. It should be set 
> blank defaulting to port 80 (your web server port). Can you try the 
> link 
> http://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata 
> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata> in 
> the email template and retry user creation.
>
> On Tue, May 10, 2016 at 9:32 AM, Jeff <jkinniso@nd.edu 
> <ma...@nd.edu>> wrote:
>
>     Ah, I just got it: https requests aren't going through. I can
>     access the pages through http protocol, but not https. Any
>     thoughts on what to do here?
>
>
>     On 05/10/2016 12:22 PM, Supun Nakandala wrote:
>>     Hi Jeff,
>>
>>     Can you send me the url for the home page in your local PGA.
>>
>>     On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe
>>     <eroma.abeysinghe@gmail.com <ma...@gmail.com>>
>>     wrote:
>>
>>         Hi Jeff,
>>
>>         Can you try another user registration but first in WSO2 ID
>>         email templates remove the 'public'
>>         so it should look like
>>
>>         https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>         <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>
>>         Thanks,
>>         Eroma
>>
>>         On Tue, May 10, 2016 at 12:13 PM, Jeff <jkinniso@nd.edu
>>         <ma...@nd.edu>> wrote:
>>
>>             Hi Eroma,
>>
>>             Yes to both of those questions. The url looks like
>>
>>             https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>>             <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>
>>             When I clicked this link (when it was first sent), I was
>>             told that the server couldn't be found. However,
>>             everything is running. That's why I was asking about the
>>             url, because I'm not sure that it's actually correct.
>>             This points to my PGA installation, and I got the
>>             confirm-user-registration part from routes.php in the PGA.
>>
>>             Best,
>>             Jeff K.
>>
>>
>>             On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>>             Hi Jeff,
>>>
>>>             Hmmm.....
>>>             you might have done this as well...
>>>             1. is the link in email correct for account
>>>             confirmation? Does it contain your PGA URL?
>>>             2. Can you log into your WSO2 using tenant username and
>>>             password?
>>>
>>>             Hope my questions would help.
>>>
>>>             Thanks,
>>>             Eroma
>>>
>>>
>>>
>>>             \u200b
>>>
>>>             On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison
>>>             <Jeffery.D.Kinnison.1@nd.edu
>>>             <ma...@nd.edu>> wrote:
>>>
>>>                 Hi Eroma,
>>>
>>>                 Yes, I followed the directions in the ReadTheDocs
>>>                 and set up WSO2-IS as close to this as I could
>>>                 find--I'm using WSO2-IS 5.1.0, and it doesn't look
>>>                 exactly the same as what the ReadTheDocs describes
>>>                 but all of the described settings still exist.
>>>
>>>                 Best,
>>>                 Jeff K.
>>>
>>>
>>>
>>>
>>>
>>>                 On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe
>>>                 <eroma.abeysinghe@gmail.com
>>>                 <ma...@gmail.com>> wrote:
>>>
>>>                     Hi Jeff,
>>>
>>>                     If you haven't already got this check this out
>>>                     as well
>>>                     http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>
>>>                     Thanks,
>>>                     Eroma
>>>
>>>                     On Tue, May 10, 2016 at 11:20 AM, Eroma
>>>                     Abeysinghe <eroma.abeysinghe@gmail.com
>>>                     <ma...@gmail.com>> wrote:
>>>
>>>                         Hi Jeff,
>>>
>>>                         Did you create a tenant for your PGA? or are
>>>                         you using the default that was in PGA_Config?
>>>                         Could you please share the identity server
>>>                         URL you are using?
>>>
>>>                         Thanks,
>>>                         Eroma
>>>
>>>                         On Tue, May 10, 2016 at 11:05 AM, Jeff
>>>                         <jkinniso@nd.edu <ma...@nd.edu>>
>>>                         wrote:
>>>
>>>                             I'm finishing up my development
>>>                             environment so I can work on some JIRA
>>>                             issues during the remaining community
>>>                             bonding period (GSoC project), and am
>>>                             stuck at user confirmation on my local PGA.
>>>
>>>                             After creating an account, the account
>>>                             confirmation email gets sent. However,
>>>                             clicking the link in the email does
>>>                             nothing. In email-admin-config.xml in my
>>>                             local WSO2, I tried the default link
>>>                             (|https://localhost:8443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>>                             changing the default link t use port
>>>                             9443
>>>                             (|https://localhost:9443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>>                             and changing to the confirm account view
>>>                             on the PGA
>>>                             (_https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation={confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}_),
>>>                             but none of these work. Does anyone have
>>>                             any suggestions?
>>>
>>>                             Also, is there a default admin account
>>>                             for the PGA? So far, I haven't seen any
>>>                             indication of one, and using the WSO2
>>>                             tenant admin credentials in the PGA
>>>                             doesn't work either.
>>>
>>>                             Best,
>>>                             Jeff K.
>>>
>>>
>>>
>>>
>>>                         -- 
>>>                         Thank You,
>>>                         Best Regards,
>>>                         Eroma
>>>
>>>
>>>
>>>
>>>                     -- 
>>>                     Thank You,
>>>                     Best Regards,
>>>                     Eroma
>>>
>>>
>>>
>>>
>>>
>>>             -- 
>>>             Thank You,
>>>             Best Regards,
>>>             Eroma
>>
>>
>>
>>
>>         -- 
>>         Thank You,
>>         Best Regards,
>>         Eroma
>>
>>
>>
>>
>>     -- 
>>     Thank you
>>     Supun Nakandala
>>     Dept. Computer Science and Engineering
>>     University of Moratuwa
>
>
>
>
> -- 
> Thank you
> Supun Nakandala
> Dept. Computer Science and Engineering
> University of Moratuwa


Re: WSO2 User Reg Confirmation

Posted by Supun Nakandala <su...@gmail.com>.
the link shouldn't have :9443 or any other port. It should be set blank
defaulting to port 80 (your web server port). Can you try the link
http://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
<https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
in
the email template and retry user creation.

On Tue, May 10, 2016 at 9:32 AM, Jeff <jk...@nd.edu> wrote:

> Ah, I just got it: https requests aren't going through. I can access the
> pages through http protocol, but not https. Any thoughts on what to do here?
>
>
> On 05/10/2016 12:22 PM, Supun Nakandala wrote:
>
> Hi Jeff,
>
> Can you send me the url for the home page in your local PGA.
>
> On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe <
> eroma.abeysinghe@gmail.com> wrote:
>
>> Hi Jeff,
>>
>> Can you try another user registration but first in WSO2 ID email
>> templates remove the 'public'
>> so it should look like
>>
>> https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>
>> Thanks,
>> Eroma
>>
>> On Tue, May 10, 2016 at 12:13 PM, Jeff < <jk...@nd.edu>jkinniso@nd.edu
>> > wrote:
>>
>>> Hi Eroma,
>>>
>>> Yes to both of those questions. The url looks like
>>>
>>> https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>>
>>> When I clicked this link (when it was first sent), I was told that the
>>> server couldn't be found. However, everything is running. That's why I was
>>> asking about the url, because I'm not sure that it's actually correct. This
>>> points to my PGA installation, and I got the confirm-user-registration part
>>> from routes.php in the PGA.
>>>
>>> Best,
>>> Jeff K.
>>>
>>>
>>> On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>>
>>> Hi Jeff,
>>>
>>> Hmmm.....
>>> you might have done this as well...
>>> 1. is the link in email correct for account confirmation? Does it
>>> contain your PGA URL?
>>> 2. Can you log into your WSO2 using tenant username and password?
>>>
>>> Hope my questions would help.
>>>
>>> Thanks,
>>> Eroma
>>>
>>>
>>>
>>> ​
>>>
>>> On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison <
>>> <Je...@nd.edu> wrote:
>>>
>>>> Hi Eroma,
>>>>
>>>> Yes, I followed the directions in the ReadTheDocs and set up WSO2-IS as
>>>> close to this as I could find--I'm using WSO2-IS 5.1.0, and it doesn't look
>>>> exactly the same as what the ReadTheDocs describes but all of the described
>>>> settings still exist.
>>>>
>>>> Best,
>>>> Jeff K.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe <
>>>> <er...@gmail.com> wrote:
>>>>
>>>>> Hi Jeff,
>>>>>
>>>>> If you haven't already got this check this out as well
>>>>> <http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/>
>>>>> http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>>>
>>>>> Thanks,
>>>>> Eroma
>>>>>
>>>>> On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
>>>>> <er...@gmail.com> wrote:
>>>>>
>>>>>> Hi Jeff,
>>>>>>
>>>>>> Did you create a tenant for your PGA? or are you using the default
>>>>>> that was in PGA_Config?
>>>>>> Could you please share the identity server URL you are using?
>>>>>>
>>>>>> Thanks,
>>>>>> Eroma
>>>>>>
>>>>>> On Tue, May 10, 2016 at 11:05 AM, Jeff < <jk...@nd.edu>
>>>>>> jkinniso@nd.edu> wrote:
>>>>>>
>>>>>>> I'm finishing up my development environment so I can work on some
>>>>>>> JIRA issues during the remaining community bonding period (GSoC project),
>>>>>>> and am stuck at user confirmation on my local PGA.
>>>>>>>
>>>>>>> After creating an account, the account confirmation email gets sent.
>>>>>>> However, clicking the link in the email does nothing. In
>>>>>>> email-admin-config.xml in my local WSO2, I tried the default link (
>>>>>>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=>
>>>>>>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>>>>>>> {confirmation-code}&amp;userName={user-name}
>>>>>>> *&amp;tenantdomain={tenant-domain}*), changing the default link t
>>>>>>> use port 9443 (
>>>>>>> <https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=>
>>>>>>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>>>>>>> {confirmation-code}&amp;userName={user-name}
>>>>>>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>>>>>>> account view on the PGA (*https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>>>>>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>>>>>>> but none of these work. Does anyone have any suggestions?
>>>>>>>
>>>>>>> Also, is there a default admin account for the PGA? So far, I
>>>>>>> haven't seen any indication of one, and using the WSO2 tenant admin
>>>>>>> credentials in the PGA doesn't work either.
>>>>>>>
>>>>>>> Best,
>>>>>>> Jeff K.
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Thank You,
>>>>>> Best Regards,
>>>>>> Eroma
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Thank You,
>>>>> Best Regards,
>>>>> Eroma
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Thank You,
>>> Best Regards,
>>> Eroma
>>>
>>>
>>>
>>
>>
>> --
>> Thank You,
>> Best Regards,
>> Eroma
>>
>
>
>
> --
> Thank you
> Supun Nakandala
> Dept. Computer Science and Engineering
> University of Moratuwa
>
>
>


-- 
Thank you
Supun Nakandala
Dept. Computer Science and Engineering
University of Moratuwa

Re: WSO2 User Reg Confirmation

Posted by Jeff <jk...@nd.edu>.
Ah, I just got it: https requests aren't going through. I can access the 
pages through http protocol, but not https. Any thoughts on what to do here?

On 05/10/2016 12:22 PM, Supun Nakandala wrote:
> Hi Jeff,
>
> Can you send me the url for the home page in your local PGA.
>
> On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe 
> <eroma.abeysinghe@gmail.com <ma...@gmail.com>> wrote:
>
>     Hi Jeff,
>
>     Can you try another user registration but first in WSO2 ID email
>     templates remove the 'public'
>     so it should look like
>
>     https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>     <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>
>     Thanks,
>     Eroma
>
>     On Tue, May 10, 2016 at 12:13 PM, Jeff <jkinniso@nd.edu
>     <ma...@nd.edu>> wrote:
>
>         Hi Eroma,
>
>         Yes to both of those questions. The url looks like
>
>         https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
>         <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>
>         When I clicked this link (when it was first sent), I was told
>         that the server couldn't be found. However, everything is
>         running. That's why I was asking about the url, because I'm
>         not sure that it's actually correct. This points to my PGA
>         installation, and I got the confirm-user-registration part
>         from routes.php in the PGA.
>
>         Best,
>         Jeff K.
>
>
>         On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>         Hi Jeff,
>>
>>         Hmmm.....
>>         you might have done this as well...
>>         1. is the link in email correct for account confirmation?
>>         Does it contain your PGA URL?
>>         2. Can you log into your WSO2 using tenant username and password?
>>
>>         Hope my questions would help.
>>
>>         Thanks,
>>         Eroma
>>
>>
>>
>>         \u200b
>>
>>         On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison
>>         <Jeffery.D.Kinnison.1@nd.edu
>>         <ma...@nd.edu>> wrote:
>>
>>             Hi Eroma,
>>
>>             Yes, I followed the directions in the ReadTheDocs and set
>>             up WSO2-IS as close to this as I could find--I'm using
>>             WSO2-IS 5.1.0, and it doesn't look exactly the same as
>>             what the ReadTheDocs describes but all of the described
>>             settings still exist.
>>
>>             Best,
>>             Jeff K.
>>
>>
>>
>>
>>
>>             On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe
>>             <eroma.abeysinghe@gmail.com
>>             <ma...@gmail.com>> wrote:
>>
>>                 Hi Jeff,
>>
>>                 If you haven't already got this check this out as well
>>                 http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>
>>                 Thanks,
>>                 Eroma
>>
>>                 On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe
>>                 <eroma.abeysinghe@gmail.com
>>                 <ma...@gmail.com>> wrote:
>>
>>                     Hi Jeff,
>>
>>                     Did you create a tenant for your PGA? or are you
>>                     using the default that was in PGA_Config?
>>                     Could you please share the identity server URL
>>                     you are using?
>>
>>                     Thanks,
>>                     Eroma
>>
>>                     On Tue, May 10, 2016 at 11:05 AM, Jeff
>>                     <jkinniso@nd.edu <ma...@nd.edu>> wrote:
>>
>>                         I'm finishing up my development environment
>>                         so I can work on some JIRA issues during the
>>                         remaining community bonding period (GSoC
>>                         project), and am stuck at user confirmation
>>                         on my local PGA.
>>
>>                         After creating an account, the account
>>                         confirmation email gets sent. However,
>>                         clicking the link in the email does nothing.
>>                         In email-admin-config.xml in my local WSO2, I
>>                         tried the default link
>>                         (|https://localhost:8443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>                         changing the default link t use port 9443
>>                         (|https://localhost:9443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>>                         and changing to the confirm account view on
>>                         the PGA
>>                         (_https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation={confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}_),
>>                         but none of these work. Does anyone have any
>>                         suggestions?
>>
>>                         Also, is there a default admin account for
>>                         the PGA? So far, I haven't seen any
>>                         indication of one, and using the WSO2 tenant
>>                         admin credentials in the PGA doesn't work either.
>>
>>                         Best,
>>                         Jeff K.
>>
>>
>>
>>
>>                     -- 
>>                     Thank You,
>>                     Best Regards,
>>                     Eroma
>>
>>
>>
>>
>>                 -- 
>>                 Thank You,
>>                 Best Regards,
>>                 Eroma
>>
>>
>>
>>
>>
>>         -- 
>>         Thank You,
>>         Best Regards,
>>         Eroma
>
>
>
>
>     -- 
>     Thank You,
>     Best Regards,
>     Eroma
>
>
>
>
> -- 
> Thank you
> Supun Nakandala
> Dept. Computer Science and Engineering
> University of Moratuwa


Re: WSO2 User Reg Confirmation

Posted by Supun Nakandala <su...@gmail.com>.
Hi Jeff,

Can you send me the url for the home page in your local PGA.

On Tue, May 10, 2016 at 9:20 AM, Eroma Abeysinghe <
eroma.abeysinghe@gmail.com> wrote:

> Hi Jeff,
>
> Can you try another user registration but first in WSO2 ID email
> templates remove the 'public'
> so it should look like
>
> https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>
> Thanks,
> Eroma
>
> On Tue, May 10, 2016 at 12:13 PM, Jeff <jk...@nd.edu> wrote:
>
>> Hi Eroma,
>>
>> Yes to both of those questions. The url looks like
>>
>> https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>>
>> When I clicked this link (when it was first sent), I was told that the
>> server couldn't be found. However, everything is running. That's why I was
>> asking about the url, because I'm not sure that it's actually correct. This
>> points to my PGA installation, and I got the confirm-user-registration part
>> from routes.php in the PGA.
>>
>> Best,
>> Jeff K.
>>
>>
>> On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>>
>> Hi Jeff,
>>
>> Hmmm.....
>> you might have done this as well...
>> 1. is the link in email correct for account confirmation? Does it contain
>> your PGA URL?
>> 2. Can you log into your WSO2 using tenant username and password?
>>
>> Hope my questions would help.
>>
>> Thanks,
>> Eroma
>>
>>
>>
>> ​
>>
>> On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison <
>> <Je...@nd.edu> wrote:
>>
>>> Hi Eroma,
>>>
>>> Yes, I followed the directions in the ReadTheDocs and set up WSO2-IS as
>>> close to this as I could find--I'm using WSO2-IS 5.1.0, and it doesn't look
>>> exactly the same as what the ReadTheDocs describes but all of the described
>>> settings still exist.
>>>
>>> Best,
>>> Jeff K.
>>>
>>>
>>>
>>>
>>>
>>> On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe <
>>> <er...@gmail.com> wrote:
>>>
>>>> Hi Jeff,
>>>>
>>>> If you haven't already got this check this out as well
>>>> <http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/>
>>>> http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>>
>>>> Thanks,
>>>> Eroma
>>>>
>>>> On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
>>>> eroma.abeysinghe@gmail.com> wrote:
>>>>
>>>>> Hi Jeff,
>>>>>
>>>>> Did you create a tenant for your PGA? or are you using the default
>>>>> that was in PGA_Config?
>>>>> Could you please share the identity server URL you are using?
>>>>>
>>>>> Thanks,
>>>>> Eroma
>>>>>
>>>>> On Tue, May 10, 2016 at 11:05 AM, Jeff < <jk...@nd.edu>
>>>>> jkinniso@nd.edu> wrote:
>>>>>
>>>>>> I'm finishing up my development environment so I can work on some
>>>>>> JIRA issues during the remaining community bonding period (GSoC project),
>>>>>> and am stuck at user confirmation on my local PGA.
>>>>>>
>>>>>> After creating an account, the account confirmation email gets sent.
>>>>>> However, clicking the link in the email does nothing. In
>>>>>> email-admin-config.xml in my local WSO2, I tried the default link (
>>>>>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=>
>>>>>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>>>>>> {confirmation-code}&amp;userName={user-name}
>>>>>> *&amp;tenantdomain={tenant-domain}*), changing the default link t
>>>>>> use port 9443 (
>>>>>> <https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=>
>>>>>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>>>>>> {confirmation-code}&amp;userName={user-name}
>>>>>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>>>>>> account view on the PGA (*
>>>>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>>>>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>>>>>> but none of these work. Does anyone have any suggestions?
>>>>>>
>>>>>> Also, is there a default admin account for the PGA? So far, I haven't
>>>>>> seen any indication of one, and using the WSO2 tenant admin credentials in
>>>>>> the PGA doesn't work either.
>>>>>>
>>>>>> Best,
>>>>>> Jeff K.
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Thank You,
>>>>> Best Regards,
>>>>> Eroma
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Thank You,
>>>> Best Regards,
>>>> Eroma
>>>>
>>>
>>>
>>
>>
>> --
>> Thank You,
>> Best Regards,
>> Eroma
>>
>>
>>
>
>
> --
> Thank You,
> Best Regards,
> Eroma
>



-- 
Thank you
Supun Nakandala
Dept. Computer Science and Engineering
University of Moratuwa

Re: WSO2 User Reg Confirmation

Posted by Eroma Abeysinghe <er...@gmail.com>.
Hi Jeff,

Can you try another user registration but first in WSO2 ID email
templates remove the 'public'
so it should look like

https://localhost/airavata-php-gateway/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata
<https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>

Thanks,
Eroma

On Tue, May 10, 2016 at 12:13 PM, Jeff <jk...@nd.edu> wrote:

> Hi Eroma,
>
> Yes to both of those questions. The url looks like
>
> https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=zerothehero33&tenantdomain=master.airavata>
>
> When I clicked this link (when it was first sent), I was told that the
> server couldn't be found. However, everything is running. That's why I was
> asking about the url, because I'm not sure that it's actually correct. This
> points to my PGA installation, and I got the confirm-user-registration part
> from routes.php in the PGA.
>
> Best,
> Jeff K.
>
>
> On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
>
> Hi Jeff,
>
> Hmmm.....
> you might have done this as well...
> 1. is the link in email correct for account confirmation? Does it contain
> your PGA URL?
> 2. Can you log into your WSO2 using tenant username and password?
>
> Hope my questions would help.
>
> Thanks,
> Eroma
>
>
>
> ​
>
> On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison <
> <Je...@nd.edu> wrote:
>
>> Hi Eroma,
>>
>> Yes, I followed the directions in the ReadTheDocs and set up WSO2-IS as
>> close to this as I could find--I'm using WSO2-IS 5.1.0, and it doesn't look
>> exactly the same as what the ReadTheDocs describes but all of the described
>> settings still exist.
>>
>> Best,
>> Jeff K.
>>
>>
>>
>>
>>
>> On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe <
>> <er...@gmail.com> wrote:
>>
>>> Hi Jeff,
>>>
>>> If you haven't already got this check this out as well
>>> <http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/>
>>> http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>>
>>> Thanks,
>>> Eroma
>>>
>>> On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
>>> eroma.abeysinghe@gmail.com> wrote:
>>>
>>>> Hi Jeff,
>>>>
>>>> Did you create a tenant for your PGA? or are you using the default that
>>>> was in PGA_Config?
>>>> Could you please share the identity server URL you are using?
>>>>
>>>> Thanks,
>>>> Eroma
>>>>
>>>> On Tue, May 10, 2016 at 11:05 AM, Jeff < <jk...@nd.edu>
>>>> jkinniso@nd.edu> wrote:
>>>>
>>>>> I'm finishing up my development environment so I can work on some JIRA
>>>>> issues during the remaining community bonding period (GSoC project), and am
>>>>> stuck at user confirmation on my local PGA.
>>>>>
>>>>> After creating an account, the account confirmation email gets sent.
>>>>> However, clicking the link in the email does nothing. In
>>>>> email-admin-config.xml in my local WSO2, I tried the default link (
>>>>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=>
>>>>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>>>>> {confirmation-code}&amp;userName={user-name}
>>>>> *&amp;tenantdomain={tenant-domain}*), changing the default link t use
>>>>> port 9443 (
>>>>> <https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=>
>>>>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>>>>> {confirmation-code}&amp;userName={user-name}
>>>>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>>>>> account view on the PGA (*
>>>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>>>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>>>>> but none of these work. Does anyone have any suggestions?
>>>>>
>>>>> Also, is there a default admin account for the PGA? So far, I haven't
>>>>> seen any indication of one, and using the WSO2 tenant admin credentials in
>>>>> the PGA doesn't work either.
>>>>>
>>>>> Best,
>>>>> Jeff K.
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Thank You,
>>>> Best Regards,
>>>> Eroma
>>>>
>>>
>>>
>>>
>>> --
>>> Thank You,
>>> Best Regards,
>>> Eroma
>>>
>>
>>
>
>
> --
> Thank You,
> Best Regards,
> Eroma
>
>
>


-- 
Thank You,
Best Regards,
Eroma

Re: WSO2 User Reg Confirmation

Posted by Jeff <jk...@nd.edu>.
Hi Eroma,

Yes to both of those questions. The url looks like

https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=6d9dbd05-8886-4056-8e8d-11d20dfa3714&userstoredomain=PRIMARY&username=jkinniso&tenantdomain=master.airavata

When I clicked this link (when it was first sent), I was told that the 
server couldn't be found. However, everything is running. That's why I 
was asking about the url, because I'm not sure that it's actually 
correct. This points to my PGA installation, and I got the 
confirm-user-registration part from routes.php in the PGA.

Best,
Jeff K.

On 05/10/2016 11:53 AM, Eroma Abeysinghe wrote:
> Hi Jeff,
>
> Hmmm.....
> you might have done this as well...
> 1. is the link in email correct for account confirmation? Does it 
> contain your PGA URL?
> 2. Can you log into your WSO2 using tenant username and password?
>
> Hope my questions would help.
>
> Thanks,
> Eroma
>
>
>
> \u200b
>
> On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison 
> <Jeffery.D.Kinnison.1@nd.edu <ma...@nd.edu>> wrote:
>
>     Hi Eroma,
>
>     Yes, I followed the directions in the ReadTheDocs and set up
>     WSO2-IS as close to this as I could find--I'm using WSO2-IS 5.1.0,
>     and it doesn't look exactly the same as what the ReadTheDocs
>     describes but all of the described settings still exist.
>
>     Best,
>     Jeff K.
>
>
>
>
>
>     On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe
>     <eroma.abeysinghe@gmail.com <ma...@gmail.com>>
>     wrote:
>
>         Hi Jeff,
>
>         If you haven't already got this check this out as well
>         http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>
>         Thanks,
>         Eroma
>
>         On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe
>         <eroma.abeysinghe@gmail.com
>         <ma...@gmail.com>> wrote:
>
>             Hi Jeff,
>
>             Did you create a tenant for your PGA? or are you using the
>             default that was in PGA_Config?
>             Could you please share the identity server URL you are using?
>
>             Thanks,
>             Eroma
>
>             On Tue, May 10, 2016 at 11:05 AM, Jeff <jkinniso@nd.edu
>             <ma...@nd.edu>> wrote:
>
>                 I'm finishing up my development environment so I can
>                 work on some JIRA issues during the remaining
>                 community bonding period (GSoC project), and am stuck
>                 at user confirmation on my local PGA.
>
>                 After creating an account, the account confirmation
>                 email gets sent. However, clicking the link in the
>                 email does nothing. In email-admin-config.xml in my
>                 local WSO2, I tried the default link
>                 (|https://localhost:8443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>                 changing the default link t use port 9443
>                 (|https://localhost:9443/InfoRecoverySample/confirmReg?confirmation={confirmation-code}&amp;userName={user-name}|_&amp;tenantdomain={tenant-domain}_),
>                 and changing to the confirm account view on the PGA
>                 (_https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation={confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}_),
>                 but none of these work. Does anyone have any suggestions?
>
>                 Also, is there a default admin account for the PGA? So
>                 far, I haven't seen any indication of one, and using
>                 the WSO2 tenant admin credentials in the PGA doesn't
>                 work either.
>
>                 Best,
>                 Jeff K.
>
>
>
>
>             -- 
>             Thank You,
>             Best Regards,
>             Eroma
>
>
>
>
>         -- 
>         Thank You,
>         Best Regards,
>         Eroma
>
>
>
>
>
> -- 
> Thank You,
> Best Regards,
> Eroma


Re: WSO2 User Reg Confirmation

Posted by Eroma Abeysinghe <er...@gmail.com>.
Hi Jeff,

Hmmm.....
you might have done this as well...
1. is the link in email correct for account confirmation? Does it contain
your PGA URL?
2. Can you log into your WSO2 using tenant username and password?

Hope my questions would help.

Thanks,
Eroma



​

On Tue, May 10, 2016 at 11:35 AM, Jeffery Kinnison <
Jeffery.D.Kinnison.1@nd.edu> wrote:

> Hi Eroma,
>
> Yes, I followed the directions in the ReadTheDocs and set up WSO2-IS as
> close to this as I could find--I'm using WSO2-IS 5.1.0, and it doesn't look
> exactly the same as what the ReadTheDocs describes but all of the described
> settings still exist.
>
> Best,
> Jeff K.
>
>
>
>
>
> On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe <
> eroma.abeysinghe@gmail.com> wrote:
>
>> Hi Jeff,
>>
>> If you haven't already got this check this out as well
>> http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>>
>> Thanks,
>> Eroma
>>
>> On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
>> eroma.abeysinghe@gmail.com> wrote:
>>
>>> Hi Jeff,
>>>
>>> Did you create a tenant for your PGA? or are you using the default that
>>> was in PGA_Config?
>>> Could you please share the identity server URL you are using?
>>>
>>> Thanks,
>>> Eroma
>>>
>>> On Tue, May 10, 2016 at 11:05 AM, Jeff <jk...@nd.edu> wrote:
>>>
>>>> I'm finishing up my development environment so I can work on some JIRA
>>>> issues during the remaining community bonding period (GSoC project), and am
>>>> stuck at user confirmation on my local PGA.
>>>>
>>>> After creating an account, the account confirmation email gets sent.
>>>> However, clicking the link in the email does nothing. In
>>>> email-admin-config.xml in my local WSO2, I tried the default link (
>>>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
>>>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>>>> {confirmation-code}&amp;userName={user-name}
>>>> *&amp;tenantdomain={tenant-domain}*), changing the default link t use
>>>> port 9443 (
>>>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
>>>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>>>> {confirmation-code}&amp;userName={user-name}
>>>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>>>> account view on the PGA (*https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>>>> but none of these work. Does anyone have any suggestions?
>>>>
>>>> Also, is there a default admin account for the PGA? So far, I haven't
>>>> seen any indication of one, and using the WSO2 tenant admin credentials in
>>>> the PGA doesn't work either.
>>>>
>>>> Best,
>>>> Jeff K.
>>>>
>>>
>>>
>>>
>>> --
>>> Thank You,
>>> Best Regards,
>>> Eroma
>>>
>>
>>
>>
>> --
>> Thank You,
>> Best Regards,
>> Eroma
>>
>
>


-- 
Thank You,
Best Regards,
Eroma

Re: WSO2 User Reg Confirmation

Posted by Jeffery Kinnison <Je...@nd.edu>.
Hi Eroma,

Yes, I followed the directions in the ReadTheDocs and set up WSO2-IS as
close to this as I could find--I'm using WSO2-IS 5.1.0, and it doesn't look
exactly the same as what the ReadTheDocs describes but all of the described
settings still exist.

Best,
Jeff K.





On Tue, May 10, 2016 at 11:24 AM, Eroma Abeysinghe <
eroma.abeysinghe@gmail.com> wrote:

> Hi Jeff,
>
> If you haven't already got this check this out as well
> http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/
>
> Thanks,
> Eroma
>
> On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
> eroma.abeysinghe@gmail.com> wrote:
>
>> Hi Jeff,
>>
>> Did you create a tenant for your PGA? or are you using the default that
>> was in PGA_Config?
>> Could you please share the identity server URL you are using?
>>
>> Thanks,
>> Eroma
>>
>> On Tue, May 10, 2016 at 11:05 AM, Jeff <jk...@nd.edu> wrote:
>>
>>> I'm finishing up my development environment so I can work on some JIRA
>>> issues during the remaining community bonding period (GSoC project), and am
>>> stuck at user confirmation on my local PGA.
>>>
>>> After creating an account, the account confirmation email gets sent.
>>> However, clicking the link in the email does nothing. In
>>> email-admin-config.xml in my local WSO2, I tried the default link (
>>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
>>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>>> {confirmation-code}&amp;userName={user-name}
>>> *&amp;tenantdomain={tenant-domain}*), changing the default link t use
>>> port 9443 (
>>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
>>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>>> {confirmation-code}&amp;userName={user-name}
>>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>>> account view on the PGA (*https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>>> but none of these work. Does anyone have any suggestions?
>>>
>>> Also, is there a default admin account for the PGA? So far, I haven't
>>> seen any indication of one, and using the WSO2 tenant admin credentials in
>>> the PGA doesn't work either.
>>>
>>> Best,
>>> Jeff K.
>>>
>>
>>
>>
>> --
>> Thank You,
>> Best Regards,
>> Eroma
>>
>
>
>
> --
> Thank You,
> Best Regards,
> Eroma
>

Re: WSO2 User Reg Confirmation

Posted by Eroma Abeysinghe <er...@gmail.com>.
Hi Jeff,

If you haven't already got this check this out as well
http://airavata.readthedocs.io/en/latest/WSO2-IS-Configuration/

Thanks,
Eroma

On Tue, May 10, 2016 at 11:20 AM, Eroma Abeysinghe <
eroma.abeysinghe@gmail.com> wrote:

> Hi Jeff,
>
> Did you create a tenant for your PGA? or are you using the default that
> was in PGA_Config?
> Could you please share the identity server URL you are using?
>
> Thanks,
> Eroma
>
> On Tue, May 10, 2016 at 11:05 AM, Jeff <jk...@nd.edu> wrote:
>
>> I'm finishing up my development environment so I can work on some JIRA
>> issues during the remaining community bonding period (GSoC project), and am
>> stuck at user confirmation on my local PGA.
>>
>> After creating an account, the account confirmation email gets sent.
>> However, clicking the link in the email does nothing. In
>> email-admin-config.xml in my local WSO2, I tried the default link (
>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
>> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
>> {confirmation-code}&amp;userName={user-name}
>> *&amp;tenantdomain={tenant-domain}*), changing the default link t use
>> port 9443 (
>> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
>> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
>> {confirmation-code}&amp;userName={user-name}
>> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm
>> account view on the PGA (*https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
>> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
>> but none of these work. Does anyone have any suggestions?
>>
>> Also, is there a default admin account for the PGA? So far, I haven't
>> seen any indication of one, and using the WSO2 tenant admin credentials in
>> the PGA doesn't work either.
>>
>> Best,
>> Jeff K.
>>
>
>
>
> --
> Thank You,
> Best Regards,
> Eroma
>



-- 
Thank You,
Best Regards,
Eroma

Re: WSO2 User Reg Confirmation

Posted by Eroma Abeysinghe <er...@gmail.com>.
Hi Jeff,

Did you create a tenant for your PGA? or are you using the default that was
in PGA_Config?
Could you please share the identity server URL you are using?

Thanks,
Eroma

On Tue, May 10, 2016 at 11:05 AM, Jeff <jk...@nd.edu> wrote:

> I'm finishing up my development environment so I can work on some JIRA
> issues during the remaining community bonding period (GSoC project), and am
> stuck at user confirmation on my local PGA.
>
> After creating an account, the account confirmation email gets sent.
> However, clicking the link in the email does nothing. In
> email-admin-config.xml in my local WSO2, I tried the default link (
> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
> https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=
> {confirmation-code}&amp;userName={user-name}
> *&amp;tenantdomain={tenant-domain}*), changing the default link t use
> port 9443 (
> <https://localhost:8443/InfoRecoverySample/confirmReg?confirmation=%7Bconfirmation-code%7D&amp;userName=%7Buser-name%7D>
> https://localhost:9443/InfoRecoverySample/confirmReg?confirmation=
> {confirmation-code}&amp;userName={user-name}
> *&amp;tenantdomain={tenant-domain}*), and changing to the confirm account
> view on the PGA (*https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=
> <https://localhost/airavata-php-gateway/public/confirm-user-registration?confirmation=>{confirmation-code}&amp;userstoredomain={userstore-domain}&amp;username={url:user-name}&amp;tenantdomain={tenant-domain}*),
> but none of these work. Does anyone have any suggestions?
>
> Also, is there a default admin account for the PGA? So far, I haven't seen
> any indication of one, and using the WSO2 tenant admin credentials in the
> PGA doesn't work either.
>
> Best,
> Jeff K.
>



-- 
Thank You,
Best Regards,
Eroma