You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@nuttx.apache.org by Alin Jerpelea <je...@gmail.com> on 2021/05/01 06:50:24 UTC
[VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Hello all,
Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and it's
time to vote on accepting it for release. If approved we will seek
final release approval from the IPMC. Voting will be open for 72hr.
A minimum of 3 binding +1 votes and more binding +1 than binding -1 are
required to pass.
The Apache requirements for approving a release can be found here [3]
"Before voting +1 [P]PMC members are required to download the signed
source code package, compile it as provided, and test the resulting
executable on their own platform, along with also verifying that the
package meets the requirements of the ASF policy on releases."
A document to walk through some of this process has been published on
our project wiki and can be found here [4].
[ ] +1 accept (indicate what you validated - e.g. performed the non-RM
items in [4])
[ ] -1 reject (explanation required)
Thank you all,
Alin Jerpelea
SCM Information:
Release tag: nuttx-10.1.0-RC1
Hash for the release incubating-nuttx tag:
4348d91d1356335483089c3865282d80f13bedcd
Hash for the release incubating-nuttx-apps tag:
112d709609e4916b21e435152679cd0b5f3177fb
[1] https://dist.apache.org/repos/dist/dev/incubator/nuttx/10.1.0-RC1/
[2]https://raw.githubusercontent.com/apache/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes
[3] https://www.apache.org/dev/release.html#approving-a-release
[4]https://cwiki.apache.org/confluence/display/NUTTX/Validating+a+staged+Release
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Alan Carvalho de Assis <ac...@gmail.com>.
This is the final sizes for ESP32-Devkitc and STM32F4Discovery tested
on Ubuntu 20.04:
ESP32:
$ ./tools/configure.sh esp32-devkitc:nsh
$ xtensa-esp32-elf-size nuttx
text data bss dec hex filename
70576 92 4976 75644 1277c nuttx
$ ls -l nuttx.bin
-rwxrwxr-x 1 alan alan 123856 May 7 11:36 nuttx.bin
gcc version 8.2.0 (crosstool-NG esp-2020r2)
NuttShell (NSH) NuttX-10.1.0
nsh> free
total used free largest
Umem: 327536 5792 321744 190576
nsh>
STM32F407:
$ ./tools/configure.sh stm32f4discovery:nsh
$ arm-none-eabi-size nuttx
text data bss dec hex filename
68516 96 1732 70344 112c8 nuttx
$ ls -l nuttx.bin
-rwxrwxr-x 1 alan alan 68612 May 7 11:39 nuttx.bin
gcc version 9.2.1 20191025 (release) [ARM/arm-9-branch revision
277599] (15:9-2019-q4-0ubuntu1)
NuttShell (NSH) NuttX-10.1.0
nsh> free
total used free largest
Umem: 193408 5664 187744 127280
nsh>
On 5/7/21, Alan Carvalho de Assis <ac...@gmail.com> wrote:
> +1
>
> On 5/6/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
>> Hi all,
>>
>> 72h have passed
>> Can we get some votes to finish the 10.1 release?
>>
>> Thanks
>> Alin
>>
>>
>> -----Original Message-----
>> From: Alin.Jerpelea@sony.com <Al...@sony.com>
>> Sent: den 3 maj 2021 17:17
>> To: dev@nuttx.apache.org
>> Subject: RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>>
>> Hello all,
>>
>> This is the latest tarball
>>
>> I am sorry for the confusion
>>
>> Thanks
>> Alin
>>
>>
>> -----Original Message-----
>> From: Nathan Hartman <ha...@gmail.com>
>> Sent: den 3 maj 2021 17:14
>> To: dev@nuttx.apache.org
>> Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>>
>> On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
>>>
>>> Hello all,
>>> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
>>> it's time to vote on accepting it for release. If approved we will
>>> seek final release approval from the IPMC. Voting will be open for 72hr.
>>>
>>> A minimum of 3 binding +1 votes and more binding +1 than binding -1
>>> are required to pass.
>>>
>>> The Apache requirements for approving a release can be found here [3]
>>> "Before voting +1 [P]PMC members are required to download the signed
>>> source code package, compile it as provided, and test the resulting
>>> executable on their own platform, along with also verifying that the
>>> package meets the requirements of the ASF policy on releases."
>>>
>>> A document to walk through some of this process has been published on
>>> our project wiki and can be found here [4].
>>>
>>> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
>>> items in [4]) [ ] -1 reject (explanation required)
>>>
>>> Thank you all,
>>> Alin Jerpelea
>>>
>>> SCM Information:
>>> Release tag: nuttx-10.1.0-RC1
>>> Hash for the release incubating-nuttx tag:
>>> 3130ff691e386934eb276587a24d1efacf3bb30b
>>> Hash for the release incubating-nuttx-apps tag:
>>> 4348d91d1356335483089c3865282d80f13bedcd
>>>
>>> [1]
>>> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
>>> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
>>> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
>>> [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
>>> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
>>> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
>>> [3]
>>> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
>>> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
>>> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
>>> [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
>>> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
>>> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>>
>>
>> Just to be sure I don't misunderstand, this is the latest release
>> candidate
>> to be tested now?
>>
>> In the future, I recommend to increment the -RC numbers each time there
>> are
>> new tarballs, to avoid any potential confusion.
>>
>> If this is indeed the latest RC, I'll try to test it today.
>>
>> Thanks for all your hard work!!
>>
>> Cheers,
>> Nathan
>>
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Alan Carvalho de Assis <ac...@gmail.com>.
+1
On 5/6/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
> Hi all,
>
> 72h have passed
> Can we get some votes to finish the 10.1 release?
>
> Thanks
> Alin
>
>
> -----Original Message-----
> From: Alin.Jerpelea@sony.com <Al...@sony.com>
> Sent: den 3 maj 2021 17:17
> To: dev@nuttx.apache.org
> Subject: RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>
> Hello all,
>
> This is the latest tarball
>
> I am sorry for the confusion
>
> Thanks
> Alin
>
>
> -----Original Message-----
> From: Nathan Hartman <ha...@gmail.com>
> Sent: den 3 maj 2021 17:14
> To: dev@nuttx.apache.org
> Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>
> On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
>>
>> Hello all,
>> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
>> it's time to vote on accepting it for release. If approved we will
>> seek final release approval from the IPMC. Voting will be open for 72hr.
>>
>> A minimum of 3 binding +1 votes and more binding +1 than binding -1
>> are required to pass.
>>
>> The Apache requirements for approving a release can be found here [3]
>> "Before voting +1 [P]PMC members are required to download the signed
>> source code package, compile it as provided, and test the resulting
>> executable on their own platform, along with also verifying that the
>> package meets the requirements of the ASF policy on releases."
>>
>> A document to walk through some of this process has been published on
>> our project wiki and can be found here [4].
>>
>> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
>> items in [4]) [ ] -1 reject (explanation required)
>>
>> Thank you all,
>> Alin Jerpelea
>>
>> SCM Information:
>> Release tag: nuttx-10.1.0-RC1
>> Hash for the release incubating-nuttx tag:
>> 3130ff691e386934eb276587a24d1efacf3bb30b
>> Hash for the release incubating-nuttx-apps tag:
>> 4348d91d1356335483089c3865282d80f13bedcd
>>
>> [1]
>> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
>> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
>> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
>> [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
>> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
>> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
>> [3]
>> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
>> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
>> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
>> [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
>> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
>> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>
>
> Just to be sure I don't misunderstand, this is the latest release candidate
> to be tested now?
>
> In the future, I recommend to increment the -RC numbers each time there are
> new tarballs, to avoid any potential confusion.
>
> If this is indeed the latest RC, I'll try to test it today.
>
> Thanks for all your hard work!!
>
> Cheers,
> Nathan
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Alan Carvalho de Assis <ac...@gmail.com>.
Thank you Nathan!
On 5/6/21, Nathan Hartman <ha...@gmail.com> wrote:
> Summary:
> +1 to release
>
> Verified:
> * Signatures
> * SHA-512 sums
> * Incubating in artifact names
> * LICENSE, NOTICE, README.md, DISCLAIMER-WIP present in both tarballs
> * Build and run b-g474e-dpow1:nsh configuration successfully
> * ReleaseNotes LGTM
>
> Notes and observations:
> * apps/wireless/wapi contains a separate LICENSE file. I think this
> should be moved into apps/LICENSE. I'll send a PR for review...
>
> Dependencies:
> * gcc-arm-none-eabi-7-2017-q4-major: gcc version 7.2.1 20170904
> (release) [ARM/embedded-7-branch revision 255204] (GNU Tools for Arm
> Embedded Processors 7-2017-q4-major)
> * kconfig-conf from NuttX tools repository
>
> Other dependencies from Debian packages:
> * binutils-dev: 2.31.1-16
> * bison: 2:3.3.2.dfsg-1
> * flex: 2.6.4-6.2
> * gperf: 3.1-1
> * libelf-dev: 0.176-1.1
> * libgmp-dev: 2:6.1.2+dfsg-4
> * libisl-dev: 0.20-2
> * libmpc-dev: 1.1.0-1
> * libmpfr-dev: 4.0.2-1
> * libncurses5-dev: 6.1+20181013-2+deb10u2
> * libusb-1.0-0-dev: 2:1.0.22-2
> * libusb-dev: 2:0.1.12-32
> * openocd: 0.10.0-5
> * texinfo: 6.5.0.dfsg.1-4+b1
>
> Per Alan's request for size information:
>
> * NuttX-10.1.0-rc1, b-g474e-dpow1:nsh configuration:
>
> $ ls -l nuttx.bin
> -rwxr-xr-x 1 test test 113912 Apr 19 12:40 nuttx.bin
>
> $ arm-none-eabi-size nuttx
> text data bss dec hex filename
> 113303 608 2612 116523 1c72b nuttx
>
> * For comparison, same configuration on NuttX-10.0.0:
>
> $ arm-none-eabi-size nuttx
> text data bss dec hex filename
> 116315 620 3008 119943 1d487 nuttx
>
> * Sizes have improved! From NuttX-10.0.0 to NuttX-10.1.0-rc0:
> - text decreases by 3012 from 116315 to 113303
> - data decreases by 12 from 620 to 608
> - bss decreases by 396 from 3008 to 2612
> - total decreases by 3420 from 119943 to 116523
>
> Development system: Linux (Debian 4.19.181-1 x86_64)
>
> Thanks to everyone for making this release (candidate) possible!
>
> Cheers,
> Nathan
>
> On Thu, May 6, 2021 at 3:40 AM <Al...@sony.com> wrote:
>>
>> Hi all,
>>
>> 72h have passed
>> Can we get some votes to finish the 10.1 release?
>>
>> Thanks
>> Alin
>>
>>
>> -----Original Message-----
>> From: Alin.Jerpelea@sony.com <Al...@sony.com>
>> Sent: den 3 maj 2021 17:17
>> To: dev@nuttx.apache.org
>> Subject: RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>>
>> Hello all,
>>
>> This is the latest tarball
>>
>> I am sorry for the confusion
>>
>> Thanks
>> Alin
>>
>>
>> -----Original Message-----
>> From: Nathan Hartman <ha...@gmail.com>
>> Sent: den 3 maj 2021 17:14
>> To: dev@nuttx.apache.org
>> Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>>
>> On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
>> >
>> > Hello all,
>> > Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
>> > it's time to vote on accepting it for release. If approved we will
>> > seek final release approval from the IPMC. Voting will be open for
>> > 72hr.
>> >
>> > A minimum of 3 binding +1 votes and more binding +1 than binding -1
>> > are required to pass.
>> >
>> > The Apache requirements for approving a release can be found here [3]
>> > "Before voting +1 [P]PMC members are required to download the signed
>> > source code package, compile it as provided, and test the resulting
>> > executable on their own platform, along with also verifying that the
>> > package meets the requirements of the ASF policy on releases."
>> >
>> > A document to walk through some of this process has been published on
>> > our project wiki and can be found here [4].
>> >
>> > [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
>> > items in [4]) [ ] -1 reject (explanation required)
>> >
>> > Thank you all,
>> > Alin Jerpelea
>> >
>> > SCM Information:
>> > Release tag: nuttx-10.1.0-RC1
>> > Hash for the release incubating-nuttx tag:
>> > 3130ff691e386934eb276587a24d1efacf3bb30b
>> > Hash for the release incubating-nuttx-apps tag:
>> > 4348d91d1356335483089c3865282d80f13bedcd
>> >
>> > [1]
>> > https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
>> > ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
>> > HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
>> > [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
>> > e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
>> > 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
>> > [3]
>> > https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
>> > proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
>> > TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
>> > [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
>> > play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
>> > TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>>
>>
>> Just to be sure I don't misunderstand, this is the latest release
>> candidate to be tested now?
>>
>> In the future, I recommend to increment the -RC numbers each time there
>> are new tarballs, to avoid any potential confusion.
>>
>> If this is indeed the latest RC, I'll try to test it today.
>>
>> Thanks for all your hard work!!
>>
>> Cheers,
>> Nathan
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Nathan Hartman <ha...@gmail.com>.
Summary:
+1 to release
Verified:
* Signatures
* SHA-512 sums
* Incubating in artifact names
* LICENSE, NOTICE, README.md, DISCLAIMER-WIP present in both tarballs
* Build and run b-g474e-dpow1:nsh configuration successfully
* ReleaseNotes LGTM
Notes and observations:
* apps/wireless/wapi contains a separate LICENSE file. I think this
should be moved into apps/LICENSE. I'll send a PR for review...
Dependencies:
* gcc-arm-none-eabi-7-2017-q4-major: gcc version 7.2.1 20170904
(release) [ARM/embedded-7-branch revision 255204] (GNU Tools for Arm
Embedded Processors 7-2017-q4-major)
* kconfig-conf from NuttX tools repository
Other dependencies from Debian packages:
* binutils-dev: 2.31.1-16
* bison: 2:3.3.2.dfsg-1
* flex: 2.6.4-6.2
* gperf: 3.1-1
* libelf-dev: 0.176-1.1
* libgmp-dev: 2:6.1.2+dfsg-4
* libisl-dev: 0.20-2
* libmpc-dev: 1.1.0-1
* libmpfr-dev: 4.0.2-1
* libncurses5-dev: 6.1+20181013-2+deb10u2
* libusb-1.0-0-dev: 2:1.0.22-2
* libusb-dev: 2:0.1.12-32
* openocd: 0.10.0-5
* texinfo: 6.5.0.dfsg.1-4+b1
Per Alan's request for size information:
* NuttX-10.1.0-rc1, b-g474e-dpow1:nsh configuration:
$ ls -l nuttx.bin
-rwxr-xr-x 1 test test 113912 Apr 19 12:40 nuttx.bin
$ arm-none-eabi-size nuttx
text data bss dec hex filename
113303 608 2612 116523 1c72b nuttx
* For comparison, same configuration on NuttX-10.0.0:
$ arm-none-eabi-size nuttx
text data bss dec hex filename
116315 620 3008 119943 1d487 nuttx
* Sizes have improved! From NuttX-10.0.0 to NuttX-10.1.0-rc0:
- text decreases by 3012 from 116315 to 113303
- data decreases by 12 from 620 to 608
- bss decreases by 396 from 3008 to 2612
- total decreases by 3420 from 119943 to 116523
Development system: Linux (Debian 4.19.181-1 x86_64)
Thanks to everyone for making this release (candidate) possible!
Cheers,
Nathan
On Thu, May 6, 2021 at 3:40 AM <Al...@sony.com> wrote:
>
> Hi all,
>
> 72h have passed
> Can we get some votes to finish the 10.1 release?
>
> Thanks
> Alin
>
>
> -----Original Message-----
> From: Alin.Jerpelea@sony.com <Al...@sony.com>
> Sent: den 3 maj 2021 17:17
> To: dev@nuttx.apache.org
> Subject: RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>
> Hello all,
>
> This is the latest tarball
>
> I am sorry for the confusion
>
> Thanks
> Alin
>
>
> -----Original Message-----
> From: Nathan Hartman <ha...@gmail.com>
> Sent: den 3 maj 2021 17:14
> To: dev@nuttx.apache.org
> Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>
> On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
> >
> > Hello all,
> > Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
> > it's time to vote on accepting it for release. If approved we will
> > seek final release approval from the IPMC. Voting will be open for 72hr.
> >
> > A minimum of 3 binding +1 votes and more binding +1 than binding -1
> > are required to pass.
> >
> > The Apache requirements for approving a release can be found here [3]
> > "Before voting +1 [P]PMC members are required to download the signed
> > source code package, compile it as provided, and test the resulting
> > executable on their own platform, along with also verifying that the
> > package meets the requirements of the ASF policy on releases."
> >
> > A document to walk through some of this process has been published on
> > our project wiki and can be found here [4].
> >
> > [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> > items in [4]) [ ] -1 reject (explanation required)
> >
> > Thank you all,
> > Alin Jerpelea
> >
> > SCM Information:
> > Release tag: nuttx-10.1.0-RC1
> > Hash for the release incubating-nuttx tag:
> > 3130ff691e386934eb276587a24d1efacf3bb30b
> > Hash for the release incubating-nuttx-apps tag:
> > 4348d91d1356335483089c3865282d80f13bedcd
> >
> > [1]
> > https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
> > ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
> > HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
> > [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
> > e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
> > 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
> > [3]
> > https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
> > proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
> > TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
> > [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
> > play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
> > TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>
>
> Just to be sure I don't misunderstand, this is the latest release candidate to be tested now?
>
> In the future, I recommend to increment the -RC numbers each time there are new tarballs, to avoid any potential confusion.
>
> If this is indeed the latest RC, I'll try to test it today.
>
> Thanks for all your hard work!!
>
> Cheers,
> Nathan
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Brennan Ashton <ba...@brennanashton.com>.
+1 :
- LICENSE, NOTICE and DISCLAIMER files exit in both repos.
- Signatures and checksums valid.
- Can build from source.
Tested this specific release on:
Bl602
Nucleo-h743
Nucleo-h745
Nucleo-f413
Nucleo-f767
Launchpad TM4C123GXL
EOS S3 QuickFeather
--Brennan
On Thu, May 6, 2021, 1:41 AM Abdelatif Guettouche <
abdelatif.guettouche@gmail.com> wrote:
> Hi,
> +1 :
> - LICENSE, NOTICE and DISCLAIMER files exit in both repos.
> - Signatures and checksums valid.
> - Can build from source.
>
> On Thu, May 6, 2021 at 8:40 AM <Al...@sony.com> wrote:
> >
> > Hi all,
> >
> > 72h have passed
> > Can we get some votes to finish the 10.1 release?
> >
> > Thanks
> > Alin
> >
> >
> > -----Original Message-----
> > From: Alin.Jerpelea@sony.com <Al...@sony.com>
> > Sent: den 3 maj 2021 17:17
> > To: dev@nuttx.apache.org
> > Subject: RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
> >
> > Hello all,
> >
> > This is the latest tarball
> >
> > I am sorry for the confusion
> >
> > Thanks
> > Alin
> >
> >
> > -----Original Message-----
> > From: Nathan Hartman <ha...@gmail.com>
> > Sent: den 3 maj 2021 17:14
> > To: dev@nuttx.apache.org
> > Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
> >
> > On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
> > >
> > > Hello all,
> > > Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
> > > it's time to vote on accepting it for release. If approved we will
> > > seek final release approval from the IPMC. Voting will be open for
> 72hr.
> > >
> > > A minimum of 3 binding +1 votes and more binding +1 than binding -1
> > > are required to pass.
> > >
> > > The Apache requirements for approving a release can be found here [3]
> > > "Before voting +1 [P]PMC members are required to download the signed
> > > source code package, compile it as provided, and test the resulting
> > > executable on their own platform, along with also verifying that the
> > > package meets the requirements of the ASF policy on releases."
> > >
> > > A document to walk through some of this process has been published on
> > > our project wiki and can be found here [4].
> > >
> > > [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> > > items in [4]) [ ] -1 reject (explanation required)
> > >
> > > Thank you all,
> > > Alin Jerpelea
> > >
> > > SCM Information:
> > > Release tag: nuttx-10.1.0-RC1
> > > Hash for the release incubating-nuttx tag:
> > > 3130ff691e386934eb276587a24d1efacf3bb30b
> > > Hash for the release incubating-nuttx-apps tag:
> > > 4348d91d1356335483089c3865282d80f13bedcd
> > >
> > > [1]
> > > https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
> > > ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
> > > HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
> > > [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
> > > e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
> > > 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
> > > [3]
> > > https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
> > > proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
> > > TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
> > > [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
> > > play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
> > > TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
> >
> >
> > Just to be sure I don't misunderstand, this is the latest release
> candidate to be tested now?
> >
> > In the future, I recommend to increment the -RC numbers each time there
> are new tarballs, to avoid any potential confusion.
> >
> > If this is indeed the latest RC, I'll try to test it today.
> >
> > Thanks for all your hard work!!
> >
> > Cheers,
> > Nathan
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Abdelatif Guettouche <ab...@gmail.com>.
Hi,
+1 :
- LICENSE, NOTICE and DISCLAIMER files exit in both repos.
- Signatures and checksums valid.
- Can build from source.
On Thu, May 6, 2021 at 8:40 AM <Al...@sony.com> wrote:
>
> Hi all,
>
> 72h have passed
> Can we get some votes to finish the 10.1 release?
>
> Thanks
> Alin
>
>
> -----Original Message-----
> From: Alin.Jerpelea@sony.com <Al...@sony.com>
> Sent: den 3 maj 2021 17:17
> To: dev@nuttx.apache.org
> Subject: RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>
> Hello all,
>
> This is the latest tarball
>
> I am sorry for the confusion
>
> Thanks
> Alin
>
>
> -----Original Message-----
> From: Nathan Hartman <ha...@gmail.com>
> Sent: den 3 maj 2021 17:14
> To: dev@nuttx.apache.org
> Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>
> On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
> >
> > Hello all,
> > Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
> > it's time to vote on accepting it for release. If approved we will
> > seek final release approval from the IPMC. Voting will be open for 72hr.
> >
> > A minimum of 3 binding +1 votes and more binding +1 than binding -1
> > are required to pass.
> >
> > The Apache requirements for approving a release can be found here [3]
> > "Before voting +1 [P]PMC members are required to download the signed
> > source code package, compile it as provided, and test the resulting
> > executable on their own platform, along with also verifying that the
> > package meets the requirements of the ASF policy on releases."
> >
> > A document to walk through some of this process has been published on
> > our project wiki and can be found here [4].
> >
> > [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> > items in [4]) [ ] -1 reject (explanation required)
> >
> > Thank you all,
> > Alin Jerpelea
> >
> > SCM Information:
> > Release tag: nuttx-10.1.0-RC1
> > Hash for the release incubating-nuttx tag:
> > 3130ff691e386934eb276587a24d1efacf3bb30b
> > Hash for the release incubating-nuttx-apps tag:
> > 4348d91d1356335483089c3865282d80f13bedcd
> >
> > [1]
> > https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
> > ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
> > HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
> > [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
> > e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
> > 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
> > [3]
> > https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
> > proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
> > TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
> > [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
> > play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
> > TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>
>
> Just to be sure I don't misunderstand, this is the latest release candidate to be tested now?
>
> In the future, I recommend to increment the -RC numbers each time there are new tarballs, to avoid any potential confusion.
>
> If this is indeed the latest RC, I'll try to test it today.
>
> Thanks for all your hard work!!
>
> Cheers,
> Nathan
RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Al...@sony.com.
Hi all,
72h have passed
Can we get some votes to finish the 10.1 release?
Thanks
Alin
-----Original Message-----
From: Alin.Jerpelea@sony.com <Al...@sony.com>
Sent: den 3 maj 2021 17:17
To: dev@nuttx.apache.org
Subject: RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Hello all,
This is the latest tarball
I am sorry for the confusion
Thanks
Alin
-----Original Message-----
From: Nathan Hartman <ha...@gmail.com>
Sent: den 3 maj 2021 17:14
To: dev@nuttx.apache.org
Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
>
> Hello all,
> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
> it's time to vote on accepting it for release. If approved we will
> seek final release approval from the IPMC. Voting will be open for 72hr.
>
> A minimum of 3 binding +1 votes and more binding +1 than binding -1
> are required to pass.
>
> The Apache requirements for approving a release can be found here [3]
> "Before voting +1 [P]PMC members are required to download the signed
> source code package, compile it as provided, and test the resulting
> executable on their own platform, along with also verifying that the
> package meets the requirements of the ASF policy on releases."
>
> A document to walk through some of this process has been published on
> our project wiki and can be found here [4].
>
> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> items in [4]) [ ] -1 reject (explanation required)
>
> Thank you all,
> Alin Jerpelea
>
> SCM Information:
> Release tag: nuttx-10.1.0-RC1
> Hash for the release incubating-nuttx tag:
> 3130ff691e386934eb276587a24d1efacf3bb30b
> Hash for the release incubating-nuttx-apps tag:
> 4348d91d1356335483089c3865282d80f13bedcd
>
> [1]
> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
> [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
> [3]
> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
> [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
Just to be sure I don't misunderstand, this is the latest release candidate to be tested now?
In the future, I recommend to increment the -RC numbers each time there are new tarballs, to avoid any potential confusion.
If this is indeed the latest RC, I'll try to test it today.
Thanks for all your hard work!!
Cheers,
Nathan
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Abdelatif Guettouche <ab...@gmail.com>.
It's gonna be there: https://github.com/apache/incubator-nuttx-website/pull/52
On Fri, May 28, 2021 at 1:37 PM Maciej Wójcik <w8...@gmail.com> wrote:
>
> Hmm, it looks like it is still missing here https://nuttx.apache.org/download (or is it intended for some reason?)
>
> On Wed, 26 May 2021, 10:28 , <Al...@sony.com> wrote:
>>
>> Hello all,
>>
>> I sent the results email and created the release
>>
>> Best regards
>> Alin
>>
>>
>> -----Original Message-----
>> From: 张铎(Duo Zhang) <pa...@gmail.com>
>> Sent: den 26 maj 2021 04:10
>> To: dev@nuttx.apache.org
>> Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>>
>> We have enough binding votes from IPMC now, so let's close the vote and finish the release?
>>
>> Thanks.
>>
>> 张铎(Duo Zhang) <pa...@gmail.com> 于2021年5月20日周四 下午4:17写道：
>>
>> > As Nathan Hartman is an ASF member now, you could ask to join the
>> > IPMC, then we could have 2 binding votes when releasing...
>> >
>> > And let me contact our champion, he has been really busy recently...
>> >
>> > Thanks.
>> >
>> > Byron Ellacott <bj...@the-wanderers.org> 于2021年5月8日周六 下午1:28写道：
>> >
>> >> +1 with caveat that I need to backport the compiler patch.
>> >>
>> >> Toolchain:
>> >> clang version 13.0.0 (git@github.com:jacobly0/llvm-project.git
>> >> ff3f5b865edbac826fdd251f810da833dda775de)
>> >> Target: ez80-none-unknown-elf
>> >> Thread model: posix
>> >>
>> >> - LICENSE, NOTICE, README.md, DISCLAIMER-WIP present in both
>> >> repositories.
>> >> - Build for eZ80 using commit ID 9d4742af00 backported from master,
>> >> plus patch for Z80 ELF support (PR to happen when tested adequately)
>> >> - Build size is 253,610 text (down from 257,713 bytes for RC0), 197
>> >> bytes in data (unchanged from RC0)
>> >>
>> >> NuttShell (NSH) NuttX-10.1.0
>> >> nsh> free
>> >> total used free largest
>> >> Umem: 253856 66272 187584 184736
>> >>
>> >> --
>> >> bje
>> >>
>> >> On Tue, May 4, 2021 at 1:25 AM Alan Carvalho de Assis
>> >> <ac...@gmail.com>
>> >> wrote:
>> >>
>> >> > Hi Everyone, please submit some information when you test it:
>> >> >
>> >> > - Used toolchain: i.e. last line of "gcc -v" is enough
>> >> > - ELF nuttx size: i.e. "arm-none-eabi-size nuttx"
>> >> > - Result of internal nsh free command.
>> >> >
>> >> > It will help us to track the size increase from a release to another.
>> >> >
>> >> > BR,
>> >> >
>> >> > Alan
>> >> >
>> >> > On 5/3/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
>> >> > > Hello all,
>> >> > >
>> >> > > This is the latest tarball
>> >> > >
>> >> > > I am sorry for the confusion
>> >> > >
>> >> > > Thanks
>> >> > > Alin
>> >> > >
>> >> > >
>> >> > > -----Original Message-----
>> >> > > From: Nathan Hartman <ha...@gmail.com>
>> >> > > Sent: den 3 maj 2021 17:14
>> >> > > To: dev@nuttx.apache.org
>> >> > > Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>> >> > >
>> >> > > On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com>
>> >> wrote:
>> >> > >>
>> >> > >> Hello all,
>> >> > >> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1]
>> >> > >> and it's time to vote on accepting it for release. If approved
>> >> > >> we will seek final release approval from the IPMC. Voting will
>> >> > >> be open for
>> >> 72hr.
>> >> > >>
>> >> > >> A minimum of 3 binding +1 votes and more binding +1 than binding
>> >> > >> -1 are required to pass.
>> >> > >>
>> >> > >> The Apache requirements for approving a release can be found
>> >> > >> here [3] "Before voting +1 [P]PMC members are required to
>> >> > >> download the signed source code package, compile it as provided,
>> >> > >> and test the resulting executable on their own platform, along
>> >> > >> with also verifying that the package meets the requirements of the ASF policy on releases."
>> >> > >>
>> >> > >> A document to walk through some of this process has been
>> >> > >> published on our project wiki and can be found here [4].
>> >> > >>
>> >> > >> [ ] +1 accept (indicate what you validated - e.g. performed the
>> >> non-RM
>> >> > >> items in [4]) [ ] -1 reject (explanation required)
>> >> > >>
>> >> > >> Thank you all,
>> >> > >> Alin Jerpelea
>> >> > >>
>> >> > >> SCM Information:
>> >> > >> Release tag: nuttx-10.1.0-RC1
>> >> > >> Hash for the release incubating-nuttx tag:
>> >> > >> 3130ff691e386934eb276587a24d1efacf3bb30b
>> >> > >> Hash for the release incubating-nuttx-apps tag:
>> >> > >> 4348d91d1356335483089c3865282d80f13bedcd
>> >> > >>
>> >> > >> [1]
>> >> > >>
>> >> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/in
>> >> c
>> >> > >>
>> >> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz
>> >> 4
>> >> > >> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
>> >> > >> [2]
>> >> https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
>> >> > >>
>> >> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!
>> >> u
>> >> > >> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTX
>> >> > >> A$
>> >> > >> [3]
>> >> > >>
>> >> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*a
>> >> p
>> >> > >>
>> >> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T
>> >> 2
>> >> > >> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
>> >> > >> [4]
>> >> https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
>> >> > >>
>> >> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_
>> >> 5
>> >> > >> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>> >> > >
>> >> > >
>> >> > > Just to be sure I don't misunderstand, this is the latest release
>> >> > candidate
>> >> > > to be tested now?
>> >> > >
>> >> > > In the future, I recommend to increment the -RC numbers each time
>> >> there
>> >> > are
>> >> > > new tarballs, to avoid any potential confusion.
>> >> > >
>> >> > > If this is indeed the latest RC, I'll try to test it today.
>> >> > >
>> >> > > Thanks for all your hard work!!
>> >> > >
>> >> > > Cheers,
>> >> > > Nathan
>> >> > >
>> >> >
>> >>
>> >
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Maciej Wójcik <w8...@gmail.com>.
Hmm, it looks like it is still missing here
https://nuttx.apache.org/download (or is it intended for some reason?)
On Wed, 26 May 2021, 10:28 , <Al...@sony.com> wrote:
> Hello all,
>
> I sent the results email and created the release
>
> Best regards
> Alin
>
>
> -----Original Message-----
> From: 张铎(Duo Zhang) <pa...@gmail.com>
> Sent: den 26 maj 2021 04:10
> To: dev@nuttx.apache.org
> Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>
> We have enough binding votes from IPMC now, so let's close the vote and
> finish the release?
>
> Thanks.
>
> 张铎(Duo Zhang) <pa...@gmail.com> 于2021年5月20日周四 下午4:17写道：
>
> > As Nathan Hartman is an ASF member now, you could ask to join the
> > IPMC, then we could have 2 binding votes when releasing...
> >
> > And let me contact our champion, he has been really busy recently...
> >
> > Thanks.
> >
> > Byron Ellacott <bj...@the-wanderers.org> 于2021年5月8日周六 下午1:28写道：
> >
> >> +1 with caveat that I need to backport the compiler patch.
> >>
> >> Toolchain:
> >> clang version 13.0.0 (git@github.com:jacobly0/llvm-project.git
> >> ff3f5b865edbac826fdd251f810da833dda775de)
> >> Target: ez80-none-unknown-elf
> >> Thread model: posix
> >>
> >> - LICENSE, NOTICE, README.md, DISCLAIMER-WIP present in both
> >> repositories.
> >> - Build for eZ80 using commit ID 9d4742af00 backported from master,
> >> plus patch for Z80 ELF support (PR to happen when tested adequately)
> >> - Build size is 253,610 text (down from 257,713 bytes for RC0), 197
> >> bytes in data (unchanged from RC0)
> >>
> >> NuttShell (NSH) NuttX-10.1.0
> >> nsh> free
> >> total used free largest
> >> Umem: 253856 66272 187584 184736
> >>
> >> --
> >> bje
> >>
> >> On Tue, May 4, 2021 at 1:25 AM Alan Carvalho de Assis
> >> <ac...@gmail.com>
> >> wrote:
> >>
> >> > Hi Everyone, please submit some information when you test it:
> >> >
> >> > - Used toolchain: i.e. last line of "gcc -v" is enough
> >> > - ELF nuttx size: i.e. "arm-none-eabi-size nuttx"
> >> > - Result of internal nsh free command.
> >> >
> >> > It will help us to track the size increase from a release to another.
> >> >
> >> > BR,
> >> >
> >> > Alan
> >> >
> >> > On 5/3/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
> >> > > Hello all,
> >> > >
> >> > > This is the latest tarball
> >> > >
> >> > > I am sorry for the confusion
> >> > >
> >> > > Thanks
> >> > > Alin
> >> > >
> >> > >
> >> > > -----Original Message-----
> >> > > From: Nathan Hartman <ha...@gmail.com>
> >> > > Sent: den 3 maj 2021 17:14
> >> > > To: dev@nuttx.apache.org
> >> > > Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
> >> > >
> >> > > On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com>
> >> wrote:
> >> > >>
> >> > >> Hello all,
> >> > >> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1]
> >> > >> and it's time to vote on accepting it for release. If approved
> >> > >> we will seek final release approval from the IPMC. Voting will
> >> > >> be open for
> >> 72hr.
> >> > >>
> >> > >> A minimum of 3 binding +1 votes and more binding +1 than binding
> >> > >> -1 are required to pass.
> >> > >>
> >> > >> The Apache requirements for approving a release can be found
> >> > >> here [3] "Before voting +1 [P]PMC members are required to
> >> > >> download the signed source code package, compile it as provided,
> >> > >> and test the resulting executable on their own platform, along
> >> > >> with also verifying that the package meets the requirements of the
> ASF policy on releases."
> >> > >>
> >> > >> A document to walk through some of this process has been
> >> > >> published on our project wiki and can be found here [4].
> >> > >>
> >> > >> [ ] +1 accept (indicate what you validated - e.g. performed the
> >> non-RM
> >> > >> items in [4]) [ ] -1 reject (explanation required)
> >> > >>
> >> > >> Thank you all,
> >> > >> Alin Jerpelea
> >> > >>
> >> > >> SCM Information:
> >> > >> Release tag: nuttx-10.1.0-RC1
> >> > >> Hash for the release incubating-nuttx tag:
> >> > >> 3130ff691e386934eb276587a24d1efacf3bb30b
> >> > >> Hash for the release incubating-nuttx-apps tag:
> >> > >> 4348d91d1356335483089c3865282d80f13bedcd
> >> > >>
> >> > >> [1]
> >> > >>
> >> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/in
> >> c
> >> > >>
> >> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz
> >> 4
> >> > >> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
> >> > >> [2]
> >> https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
> >> > >>
> >> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!
> >> u
> >> > >> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTX
> >> > >> A$
> >> > >> [3]
> >> > >>
> >> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*a
> >> p
> >> > >>
> >> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T
> >> 2
> >> > >> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
> >> > >> [4]
> >> https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
> >> > >>
> >> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_
> >> 5
> >> > >> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
> >> > >
> >> > >
> >> > > Just to be sure I don't misunderstand, this is the latest release
> >> > candidate
> >> > > to be tested now?
> >> > >
> >> > > In the future, I recommend to increment the -RC numbers each time
> >> there
> >> > are
> >> > > new tarballs, to avoid any potential confusion.
> >> > >
> >> > > If this is indeed the latest RC, I'll try to test it today.
> >> > >
> >> > > Thanks for all your hard work!!
> >> > >
> >> > > Cheers,
> >> > > Nathan
> >> > >
> >> >
> >>
> >
>
RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Al...@sony.com.
Hello all,
I sent the results email and created the release
Best regards
Alin
-----Original Message-----
From: 张铎(Duo Zhang) <pa...@gmail.com>
Sent: den 26 maj 2021 04:10
To: dev@nuttx.apache.org
Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
We have enough binding votes from IPMC now, so let's close the vote and finish the release?
Thanks.
张铎(Duo Zhang) <pa...@gmail.com> 于2021年5月20日周四 下午4:17写道：
> As Nathan Hartman is an ASF member now, you could ask to join the
> IPMC, then we could have 2 binding votes when releasing...
>
> And let me contact our champion, he has been really busy recently...
>
> Thanks.
>
> Byron Ellacott <bj...@the-wanderers.org> 于2021年5月8日周六 下午1:28写道：
>
>> +1 with caveat that I need to backport the compiler patch.
>>
>> Toolchain:
>> clang version 13.0.0 (git@github.com:jacobly0/llvm-project.git
>> ff3f5b865edbac826fdd251f810da833dda775de)
>> Target: ez80-none-unknown-elf
>> Thread model: posix
>>
>> - LICENSE, NOTICE, README.md, DISCLAIMER-WIP present in both
>> repositories.
>> - Build for eZ80 using commit ID 9d4742af00 backported from master,
>> plus patch for Z80 ELF support (PR to happen when tested adequately)
>> - Build size is 253,610 text (down from 257,713 bytes for RC0), 197
>> bytes in data (unchanged from RC0)
>>
>> NuttShell (NSH) NuttX-10.1.0
>> nsh> free
>> total used free largest
>> Umem: 253856 66272 187584 184736
>>
>> --
>> bje
>>
>> On Tue, May 4, 2021 at 1:25 AM Alan Carvalho de Assis
>> <ac...@gmail.com>
>> wrote:
>>
>> > Hi Everyone, please submit some information when you test it:
>> >
>> > - Used toolchain: i.e. last line of "gcc -v" is enough
>> > - ELF nuttx size: i.e. "arm-none-eabi-size nuttx"
>> > - Result of internal nsh free command.
>> >
>> > It will help us to track the size increase from a release to another.
>> >
>> > BR,
>> >
>> > Alan
>> >
>> > On 5/3/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
>> > > Hello all,
>> > >
>> > > This is the latest tarball
>> > >
>> > > I am sorry for the confusion
>> > >
>> > > Thanks
>> > > Alin
>> > >
>> > >
>> > > -----Original Message-----
>> > > From: Nathan Hartman <ha...@gmail.com>
>> > > Sent: den 3 maj 2021 17:14
>> > > To: dev@nuttx.apache.org
>> > > Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>> > >
>> > > On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com>
>> wrote:
>> > >>
>> > >> Hello all,
>> > >> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1]
>> > >> and it's time to vote on accepting it for release. If approved
>> > >> we will seek final release approval from the IPMC. Voting will
>> > >> be open for
>> 72hr.
>> > >>
>> > >> A minimum of 3 binding +1 votes and more binding +1 than binding
>> > >> -1 are required to pass.
>> > >>
>> > >> The Apache requirements for approving a release can be found
>> > >> here [3] "Before voting +1 [P]PMC members are required to
>> > >> download the signed source code package, compile it as provided,
>> > >> and test the resulting executable on their own platform, along
>> > >> with also verifying that the package meets the requirements of the ASF policy on releases."
>> > >>
>> > >> A document to walk through some of this process has been
>> > >> published on our project wiki and can be found here [4].
>> > >>
>> > >> [ ] +1 accept (indicate what you validated - e.g. performed the
>> non-RM
>> > >> items in [4]) [ ] -1 reject (explanation required)
>> > >>
>> > >> Thank you all,
>> > >> Alin Jerpelea
>> > >>
>> > >> SCM Information:
>> > >> Release tag: nuttx-10.1.0-RC1
>> > >> Hash for the release incubating-nuttx tag:
>> > >> 3130ff691e386934eb276587a24d1efacf3bb30b
>> > >> Hash for the release incubating-nuttx-apps tag:
>> > >> 4348d91d1356335483089c3865282d80f13bedcd
>> > >>
>> > >> [1]
>> > >>
>> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/in
>> c
>> > >>
>> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz
>> 4
>> > >> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
>> > >> [2]
>> https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
>> > >>
>> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!
>> u
>> > >> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTX
>> > >> A$
>> > >> [3]
>> > >>
>> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*a
>> p
>> > >>
>> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T
>> 2
>> > >> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
>> > >> [4]
>> https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
>> > >>
>> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_
>> 5
>> > >> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>> > >
>> > >
>> > > Just to be sure I don't misunderstand, this is the latest release
>> > candidate
>> > > to be tested now?
>> > >
>> > > In the future, I recommend to increment the -RC numbers each time
>> there
>> > are
>> > > new tarballs, to avoid any potential confusion.
>> > >
>> > > If this is indeed the latest RC, I'll try to test it today.
>> > >
>> > > Thanks for all your hard work!!
>> > >
>> > > Cheers,
>> > > Nathan
>> > >
>> >
>>
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by "张铎 (Duo Zhang)" <pa...@gmail.com>.
We have enough binding votes from IPMC now, so let's close the vote and
finish the release?
Thanks.
张铎(Duo Zhang) <pa...@gmail.com> 于2021年5月20日周四 下午4:17写道：
> As Nathan Hartman is an ASF member now, you could ask to join the IPMC,
> then we could have 2 binding votes when releasing...
>
> And let me contact our champion, he has been really busy recently...
>
> Thanks.
>
> Byron Ellacott <bj...@the-wanderers.org> 于2021年5月8日周六 下午1:28写道：
>
>> +1 with caveat that I need to backport the compiler patch.
>>
>> Toolchain:
>> clang version 13.0.0 (git@github.com:jacobly0/llvm-project.git
>> ff3f5b865edbac826fdd251f810da833dda775de)
>> Target: ez80-none-unknown-elf
>> Thread model: posix
>>
>> - LICENSE, NOTICE, README.md, DISCLAIMER-WIP present in both
>> repositories.
>> - Build for eZ80 using commit ID 9d4742af00 backported from master, plus
>> patch for Z80 ELF support (PR to happen when tested adequately)
>> - Build size is 253,610 text (down from 257,713 bytes for RC0), 197 bytes
>> in data (unchanged from RC0)
>>
>> NuttShell (NSH) NuttX-10.1.0
>> nsh> free
>> total used free largest
>> Umem: 253856 66272 187584 184736
>>
>> --
>> bje
>>
>> On Tue, May 4, 2021 at 1:25 AM Alan Carvalho de Assis <ac...@gmail.com>
>> wrote:
>>
>> > Hi Everyone, please submit some information when you test it:
>> >
>> > - Used toolchain: i.e. last line of "gcc -v" is enough
>> > - ELF nuttx size: i.e. "arm-none-eabi-size nuttx"
>> > - Result of internal nsh free command.
>> >
>> > It will help us to track the size increase from a release to another.
>> >
>> > BR,
>> >
>> > Alan
>> >
>> > On 5/3/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
>> > > Hello all,
>> > >
>> > > This is the latest tarball
>> > >
>> > > I am sorry for the confusion
>> > >
>> > > Thanks
>> > > Alin
>> > >
>> > >
>> > > -----Original Message-----
>> > > From: Nathan Hartman <ha...@gmail.com>
>> > > Sent: den 3 maj 2021 17:14
>> > > To: dev@nuttx.apache.org
>> > > Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>> > >
>> > > On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com>
>> wrote:
>> > >>
>> > >> Hello all,
>> > >> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
>> > >> it's time to vote on accepting it for release. If approved we will
>> > >> seek final release approval from the IPMC. Voting will be open for
>> 72hr.
>> > >>
>> > >> A minimum of 3 binding +1 votes and more binding +1 than binding -1
>> > >> are required to pass.
>> > >>
>> > >> The Apache requirements for approving a release can be found here [3]
>> > >> "Before voting +1 [P]PMC members are required to download the signed
>> > >> source code package, compile it as provided, and test the resulting
>> > >> executable on their own platform, along with also verifying that the
>> > >> package meets the requirements of the ASF policy on releases."
>> > >>
>> > >> A document to walk through some of this process has been published on
>> > >> our project wiki and can be found here [4].
>> > >>
>> > >> [ ] +1 accept (indicate what you validated - e.g. performed the
>> non-RM
>> > >> items in [4]) [ ] -1 reject (explanation required)
>> > >>
>> > >> Thank you all,
>> > >> Alin Jerpelea
>> > >>
>> > >> SCM Information:
>> > >> Release tag: nuttx-10.1.0-RC1
>> > >> Hash for the release incubating-nuttx tag:
>> > >> 3130ff691e386934eb276587a24d1efacf3bb30b
>> > >> Hash for the release incubating-nuttx-apps tag:
>> > >> 4348d91d1356335483089c3865282d80f13bedcd
>> > >>
>> > >> [1]
>> > >>
>> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
>> > >>
>> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
>> > >> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
>> > >> [2]
>> https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
>> > >>
>> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
>> > >> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
>> > >> [3]
>> > >>
>> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
>> > >>
>> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
>> > >> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
>> > >> [4]
>> https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
>> > >>
>> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
>> > >> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>> > >
>> > >
>> > > Just to be sure I don't misunderstand, this is the latest release
>> > candidate
>> > > to be tested now?
>> > >
>> > > In the future, I recommend to increment the -RC numbers each time
>> there
>> > are
>> > > new tarballs, to avoid any potential confusion.
>> > >
>> > > If this is indeed the latest RC, I'll try to test it today.
>> > >
>> > > Thanks for all your hard work!!
>> > >
>> > > Cheers,
>> > > Nathan
>> > >
>> >
>>
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by "张铎 (Duo Zhang)" <pa...@gmail.com>.
As Nathan Hartman is an ASF member now, you could ask to join the IPMC,
then we could have 2 binding votes when releasing...
And let me contact our champion, he has been really busy recently...
Thanks.
Byron Ellacott <bj...@the-wanderers.org> 于2021年5月8日周六 下午1:28写道：
> +1 with caveat that I need to backport the compiler patch.
>
> Toolchain:
> clang version 13.0.0 (git@github.com:jacobly0/llvm-project.git
> ff3f5b865edbac826fdd251f810da833dda775de)
> Target: ez80-none-unknown-elf
> Thread model: posix
>
> - LICENSE, NOTICE, README.md, DISCLAIMER-WIP present in both repositories.
> - Build for eZ80 using commit ID 9d4742af00 backported from master, plus
> patch for Z80 ELF support (PR to happen when tested adequately)
> - Build size is 253,610 text (down from 257,713 bytes for RC0), 197 bytes
> in data (unchanged from RC0)
>
> NuttShell (NSH) NuttX-10.1.0
> nsh> free
> total used free largest
> Umem: 253856 66272 187584 184736
>
> --
> bje
>
> On Tue, May 4, 2021 at 1:25 AM Alan Carvalho de Assis <ac...@gmail.com>
> wrote:
>
> > Hi Everyone, please submit some information when you test it:
> >
> > - Used toolchain: i.e. last line of "gcc -v" is enough
> > - ELF nuttx size: i.e. "arm-none-eabi-size nuttx"
> > - Result of internal nsh free command.
> >
> > It will help us to track the size increase from a release to another.
> >
> > BR,
> >
> > Alan
> >
> > On 5/3/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
> > > Hello all,
> > >
> > > This is the latest tarball
> > >
> > > I am sorry for the confusion
> > >
> > > Thanks
> > > Alin
> > >
> > >
> > > -----Original Message-----
> > > From: Nathan Hartman <ha...@gmail.com>
> > > Sent: den 3 maj 2021 17:14
> > > To: dev@nuttx.apache.org
> > > Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
> > >
> > > On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com>
> wrote:
> > >>
> > >> Hello all,
> > >> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
> > >> it's time to vote on accepting it for release. If approved we will
> > >> seek final release approval from the IPMC. Voting will be open for
> 72hr.
> > >>
> > >> A minimum of 3 binding +1 votes and more binding +1 than binding -1
> > >> are required to pass.
> > >>
> > >> The Apache requirements for approving a release can be found here [3]
> > >> "Before voting +1 [P]PMC members are required to download the signed
> > >> source code package, compile it as provided, and test the resulting
> > >> executable on their own platform, along with also verifying that the
> > >> package meets the requirements of the ASF policy on releases."
> > >>
> > >> A document to walk through some of this process has been published on
> > >> our project wiki and can be found here [4].
> > >>
> > >> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> > >> items in [4]) [ ] -1 reject (explanation required)
> > >>
> > >> Thank you all,
> > >> Alin Jerpelea
> > >>
> > >> SCM Information:
> > >> Release tag: nuttx-10.1.0-RC1
> > >> Hash for the release incubating-nuttx tag:
> > >> 3130ff691e386934eb276587a24d1efacf3bb30b
> > >> Hash for the release incubating-nuttx-apps tag:
> > >> 4348d91d1356335483089c3865282d80f13bedcd
> > >>
> > >> [1]
> > >>
> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
> > >> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
> > >> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
> > >> [2]
> https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
> > >> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
> > >> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
> > >> [3]
> > >>
> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
> > >> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
> > >> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
> > >> [4]
> https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
> > >> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
> > >> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
> > >
> > >
> > > Just to be sure I don't misunderstand, this is the latest release
> > candidate
> > > to be tested now?
> > >
> > > In the future, I recommend to increment the -RC numbers each time there
> > are
> > > new tarballs, to avoid any potential confusion.
> > >
> > > If this is indeed the latest RC, I'll try to test it today.
> > >
> > > Thanks for all your hard work!!
> > >
> > > Cheers,
> > > Nathan
> > >
> >
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Byron Ellacott <bj...@the-wanderers.org>.
+1 with caveat that I need to backport the compiler patch.
Toolchain:
clang version 13.0.0 (git@github.com:jacobly0/llvm-project.git
ff3f5b865edbac826fdd251f810da833dda775de)
Target: ez80-none-unknown-elf
Thread model: posix
- LICENSE, NOTICE, README.md, DISCLAIMER-WIP present in both repositories.
- Build for eZ80 using commit ID 9d4742af00 backported from master, plus
patch for Z80 ELF support (PR to happen when tested adequately)
- Build size is 253,610 text (down from 257,713 bytes for RC0), 197 bytes
in data (unchanged from RC0)
NuttShell (NSH) NuttX-10.1.0
nsh> free
total used free largest
Umem: 253856 66272 187584 184736
--
bje
On Tue, May 4, 2021 at 1:25 AM Alan Carvalho de Assis <ac...@gmail.com>
wrote:
> Hi Everyone, please submit some information when you test it:
>
> - Used toolchain: i.e. last line of "gcc -v" is enough
> - ELF nuttx size: i.e. "arm-none-eabi-size nuttx"
> - Result of internal nsh free command.
>
> It will help us to track the size increase from a release to another.
>
> BR,
>
> Alan
>
> On 5/3/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
> > Hello all,
> >
> > This is the latest tarball
> >
> > I am sorry for the confusion
> >
> > Thanks
> > Alin
> >
> >
> > -----Original Message-----
> > From: Nathan Hartman <ha...@gmail.com>
> > Sent: den 3 maj 2021 17:14
> > To: dev@nuttx.apache.org
> > Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
> >
> > On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
> >>
> >> Hello all,
> >> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
> >> it's time to vote on accepting it for release. If approved we will
> >> seek final release approval from the IPMC. Voting will be open for 72hr.
> >>
> >> A minimum of 3 binding +1 votes and more binding +1 than binding -1
> >> are required to pass.
> >>
> >> The Apache requirements for approving a release can be found here [3]
> >> "Before voting +1 [P]PMC members are required to download the signed
> >> source code package, compile it as provided, and test the resulting
> >> executable on their own platform, along with also verifying that the
> >> package meets the requirements of the ASF policy on releases."
> >>
> >> A document to walk through some of this process has been published on
> >> our project wiki and can be found here [4].
> >>
> >> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> >> items in [4]) [ ] -1 reject (explanation required)
> >>
> >> Thank you all,
> >> Alin Jerpelea
> >>
> >> SCM Information:
> >> Release tag: nuttx-10.1.0-RC1
> >> Hash for the release incubating-nuttx tag:
> >> 3130ff691e386934eb276587a24d1efacf3bb30b
> >> Hash for the release incubating-nuttx-apps tag:
> >> 4348d91d1356335483089c3865282d80f13bedcd
> >>
> >> [1]
> >> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
> >> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
> >> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
> >> [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
> >> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
> >> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
> >> [3]
> >> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
> >> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
> >> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
> >> [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
> >> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
> >> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
> >
> >
> > Just to be sure I don't misunderstand, this is the latest release
> candidate
> > to be tested now?
> >
> > In the future, I recommend to increment the -RC numbers each time there
> are
> > new tarballs, to avoid any potential confusion.
> >
> > If this is indeed the latest RC, I'll try to test it today.
> >
> > Thanks for all your hard work!!
> >
> > Cheers,
> > Nathan
> >
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Alan Carvalho de Assis <ac...@gmail.com>.
Hi Everyone, please submit some information when you test it:
- Used toolchain: i.e. last line of "gcc -v" is enough
- ELF nuttx size: i.e. "arm-none-eabi-size nuttx"
- Result of internal nsh free command.
It will help us to track the size increase from a release to another.
BR,
Alan
On 5/3/21, Alin.Jerpelea@sony.com <Al...@sony.com> wrote:
> Hello all,
>
> This is the latest tarball
>
> I am sorry for the confusion
>
> Thanks
> Alin
>
>
> -----Original Message-----
> From: Nathan Hartman <ha...@gmail.com>
> Sent: den 3 maj 2021 17:14
> To: dev@nuttx.apache.org
> Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
>
> On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
>>
>> Hello all,
>> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
>> it's time to vote on accepting it for release. If approved we will
>> seek final release approval from the IPMC. Voting will be open for 72hr.
>>
>> A minimum of 3 binding +1 votes and more binding +1 than binding -1
>> are required to pass.
>>
>> The Apache requirements for approving a release can be found here [3]
>> "Before voting +1 [P]PMC members are required to download the signed
>> source code package, compile it as provided, and test the resulting
>> executable on their own platform, along with also verifying that the
>> package meets the requirements of the ASF policy on releases."
>>
>> A document to walk through some of this process has been published on
>> our project wiki and can be found here [4].
>>
>> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
>> items in [4]) [ ] -1 reject (explanation required)
>>
>> Thank you all,
>> Alin Jerpelea
>>
>> SCM Information:
>> Release tag: nuttx-10.1.0-RC1
>> Hash for the release incubating-nuttx tag:
>> 3130ff691e386934eb276587a24d1efacf3bb30b
>> Hash for the release incubating-nuttx-apps tag:
>> 4348d91d1356335483089c3865282d80f13bedcd
>>
>> [1]
>> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
>> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
>> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
>> [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
>> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
>> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
>> [3]
>> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
>> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
>> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
>> [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
>> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
>> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
>
>
> Just to be sure I don't misunderstand, this is the latest release candidate
> to be tested now?
>
> In the future, I recommend to increment the -RC numbers each time there are
> new tarballs, to avoid any potential confusion.
>
> If this is indeed the latest RC, I'll try to test it today.
>
> Thanks for all your hard work!!
>
> Cheers,
> Nathan
>
RE: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Al...@sony.com.
Hello all,
This is the latest tarball
I am sorry for the confusion
Thanks
Alin
-----Original Message-----
From: Nathan Hartman <ha...@gmail.com>
Sent: den 3 maj 2021 17:14
To: dev@nuttx.apache.org
Subject: Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
>
> Hello all,
> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
> it's time to vote on accepting it for release. If approved we will
> seek final release approval from the IPMC. Voting will be open for 72hr.
>
> A minimum of 3 binding +1 votes and more binding +1 than binding -1
> are required to pass.
>
> The Apache requirements for approving a release can be found here [3]
> "Before voting +1 [P]PMC members are required to download the signed
> source code package, compile it as provided, and test the resulting
> executable on their own platform, along with also verifying that the
> package meets the requirements of the ASF policy on releases."
>
> A document to walk through some of this process has been published on
> our project wiki and can be found here [4].
>
> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> items in [4]) [ ] -1 reject (explanation required)
>
> Thank you all,
> Alin Jerpelea
>
> SCM Information:
> Release tag: nuttx-10.1.0-RC1
> Hash for the release incubating-nuttx tag:
> 3130ff691e386934eb276587a24d1efacf3bb30b
> Hash for the release incubating-nuttx-apps tag:
> 4348d91d1356335483089c3865282d80f13bedcd
>
> [1]
> https://urldefense.com/v3/__https://dist.apache.org/repos/dist/dev/inc
> ubator/nuttx/10.1.0-RC1/__;!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4
> HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBF0cM9oFQ$
> [2]https://urldefense.com/v3/__https://raw.githubusercontent.com/apach
> e/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes__;!!JmoZiZGBv3RvKRSx!u
> 7bO_5TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBELDkRTXA$
> [3]
> https://urldefense.com/v3/__https://www.apache.org/dev/release.html*ap
> proving-a-release__;Iw!!JmoZiZGBv3RvKRSx!u7bO_5TgIUsO429c5U2xXTz4HI0T2
> TqnSm836Wse15R0SGxhUdWk3viAcBGKE_xsSw$
> [4]https://urldefense.com/v3/__https://cwiki.apache.org/confluence/dis
> play/NUTTX/Validating*a*staged*Release__;Kysr!!JmoZiZGBv3RvKRSx!u7bO_5
> TgIUsO429c5U2xXTz4HI0T2TqnSm836Wse15R0SGxhUdWk3viAcBE_QwknXQ$
Just to be sure I don't misunderstand, this is the latest release candidate to be tested now?
In the future, I recommend to increment the -RC numbers each time there are new tarballs, to avoid any potential confusion.
If this is indeed the latest RC, I'll try to test it today.
Thanks for all your hard work!!
Cheers,
Nathan
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Nathan Hartman <ha...@gmail.com>.
On Mon, May 3, 2021 at 1:22 AM Alin Jerpelea <je...@gmail.com> wrote:
>
> Hello all,
> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and it's
> time to vote on accepting it for release. If approved we will seek
> final release approval from the IPMC. Voting will be open for 72hr.
>
> A minimum of 3 binding +1 votes and more binding +1 than binding -1 are
> required to pass.
>
> The Apache requirements for approving a release can be found here [3]
> "Before voting +1 [P]PMC members are required to download the signed
> source code package, compile it as provided, and test the resulting
> executable on their own platform, along with also verifying that the
> package meets the requirements of the ASF policy on releases."
>
> A document to walk through some of this process has been published on
> our project wiki and can be found here [4].
>
> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> items in [4])
> [ ] -1 reject (explanation required)
>
> Thank you all,
> Alin Jerpelea
>
> SCM Information:
> Release tag: nuttx-10.1.0-RC1
> Hash for the release incubating-nuttx tag:
> 3130ff691e386934eb276587a24d1efacf3bb30b
> Hash for the release incubating-nuttx-apps tag:
> 4348d91d1356335483089c3865282d80f13bedcd
>
> [1] https://dist.apache.org/repos/dist/dev/incubator/nuttx/10.1.0-RC1/
> [2]https://raw.githubusercontent.com/apache/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes
> [3] https://www.apache.org/dev/release.html#approving-a-release
> [4]https://cwiki.apache.org/confluence/display/NUTTX/Validating+a+staged+Release
Just to be sure I don't misunderstand, this is the latest release
candidate to be tested now?
In the future, I recommend to increment the -RC numbers each time
there are new tarballs, to avoid any potential confusion.
If this is indeed the latest RC, I'll try to test it today.
Thanks for all your hard work!!
Cheers,
Nathan
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Alin Jerpelea <je...@gmail.com>.
Hello all,
Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and it's
time to vote on accepting it for release. If approved we will seek
final release approval from the IPMC. Voting will be open for 72hr.
A minimum of 3 binding +1 votes and more binding +1 than binding -1 are
required to pass.
The Apache requirements for approving a release can be found here [3]
"Before voting +1 [P]PMC members are required to download the signed
source code package, compile it as provided, and test the resulting
executable on their own platform, along with also verifying that the
package meets the requirements of the ASF policy on releases."
A document to walk through some of this process has been published on
our project wiki and can be found here [4].
[ ] +1 accept (indicate what you validated - e.g. performed the non-RM
items in [4])
[ ] -1 reject (explanation required)
Thank you all,
Alin Jerpelea
SCM Information:
Release tag: nuttx-10.1.0-RC1
Hash for the release incubating-nuttx tag:
3130ff691e386934eb276587a24d1efacf3bb30b
Hash for the release incubating-nuttx-apps tag:
4348d91d1356335483089c3865282d80f13bedcd
[1] https://dist.apache.org/repos/dist/dev/incubator/nuttx/10.1.0-RC1/
[2]https://raw.githubusercontent.com/apache/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes
[3] https://www.apache.org/dev/release.html#approving-a-release
[4]https://cwiki.apache.org/confluence/display/NUTTX/Validating+a+staged+Release
On Sat, May 1, 2021 at 2:54 PM Alin Jerpelea <je...@gmail.com> wrote:
> I created the PR for this fix and I will create RC again if there are no
> other concerns
>
> Thanks
> Alin
>
> On Sat, May 1, 2021, 14:13 Alan Carvalho de Assis <ac...@gmail.com>
> wrote:
>
>> Yes, this fix is important for all RISC-V MCUs
>>
>> BR,
>>
>> Alan
>>
>> On Saturday, May 1, 2021, Gustavo Henrique Nihei <gh...@gmail.com>
>> wrote:
>>
>> > Hi folks,
>> >
>> > I believe we still need to backport this PR
>> > https://github.com/apache/incubator-nuttx/pull/3636 (already labelled)
>> > It is a complement to
>> > https://github.com/apache/incubator-nuttx/pull/3614, which has been
>> > recently backported.
>> > Both address the issue of stack alignment for RISC-V chips.
>> >
>> > Best regards,
>> > Gustavo.
>> >
>> > On Sat, May 1, 2021 at 3:50 AM Alin Jerpelea <je...@gmail.com>
>> wrote:
>> > >
>> > > Hello all,
>> > > Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and
>> it's
>> > > time to vote on accepting it for release. If approved we will seek
>> > > final release approval from the IPMC. Voting will be open for 72hr.
>> > >
>> > > A minimum of 3 binding +1 votes and more binding +1 than binding -1
>> are
>> > > required to pass.
>> > >
>> > > The Apache requirements for approving a release can be found here [3]
>> > > "Before voting +1 [P]PMC members are required to download the signed
>> > > source code package, compile it as provided, and test the resulting
>> > > executable on their own platform, along with also verifying that the
>> > > package meets the requirements of the ASF policy on releases."
>> > >
>> > > A document to walk through some of this process has been published on
>> > > our project wiki and can be found here [4].
>> > >
>> > > [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
>> > > items in [4])
>> > > [ ] -1 reject (explanation required)
>> > >
>> > > Thank you all,
>> > > Alin Jerpelea
>> > >
>> > > SCM Information:
>> > > Release tag: nuttx-10.1.0-RC1
>> > > Hash for the release incubating-nuttx tag:
>> > > 4348d91d1356335483089c3865282d80f13bedcd
>> > > Hash for the release incubating-nuttx-apps tag:
>> > > 112d709609e4916b21e435152679cd0b5f3177fb
>> > >
>> > > [1]
>> https://dist.apache.org/repos/dist/dev/incubator/nuttx/10.1.0-RC1/
>> > > [2]https://raw.githubusercontent.com/apache/
>> > incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes
>> > > [3] https://www.apache.org/dev/release.html#approving-a-release
>> > > [4]https://cwiki.apache.org/confluence/display/NUTTX/
>> > Validating+a+staged+Release
>> >
>> >
>> >
>> > --
>> > Gustavo Henrique Nihei
>> >
>>
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Alin Jerpelea <je...@gmail.com>.
I created the PR for this fix and I will create RC again if there are no
other concerns
Thanks
Alin
On Sat, May 1, 2021, 14:13 Alan Carvalho de Assis <ac...@gmail.com> wrote:
> Yes, this fix is important for all RISC-V MCUs
>
> BR,
>
> Alan
>
> On Saturday, May 1, 2021, Gustavo Henrique Nihei <gh...@gmail.com>
> wrote:
>
> > Hi folks,
> >
> > I believe we still need to backport this PR
> > https://github.com/apache/incubator-nuttx/pull/3636 (already labelled)
> > It is a complement to
> > https://github.com/apache/incubator-nuttx/pull/3614, which has been
> > recently backported.
> > Both address the issue of stack alignment for RISC-V chips.
> >
> > Best regards,
> > Gustavo.
> >
> > On Sat, May 1, 2021 at 3:50 AM Alin Jerpelea <je...@gmail.com> wrote:
> > >
> > > Hello all,
> > > Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and it's
> > > time to vote on accepting it for release. If approved we will seek
> > > final release approval from the IPMC. Voting will be open for 72hr.
> > >
> > > A minimum of 3 binding +1 votes and more binding +1 than binding -1 are
> > > required to pass.
> > >
> > > The Apache requirements for approving a release can be found here [3]
> > > "Before voting +1 [P]PMC members are required to download the signed
> > > source code package, compile it as provided, and test the resulting
> > > executable on their own platform, along with also verifying that the
> > > package meets the requirements of the ASF policy on releases."
> > >
> > > A document to walk through some of this process has been published on
> > > our project wiki and can be found here [4].
> > >
> > > [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> > > items in [4])
> > > [ ] -1 reject (explanation required)
> > >
> > > Thank you all,
> > > Alin Jerpelea
> > >
> > > SCM Information:
> > > Release tag: nuttx-10.1.0-RC1
> > > Hash for the release incubating-nuttx tag:
> > > 4348d91d1356335483089c3865282d80f13bedcd
> > > Hash for the release incubating-nuttx-apps tag:
> > > 112d709609e4916b21e435152679cd0b5f3177fb
> > >
> > > [1] https://dist.apache.org/repos/dist/dev/incubator/nuttx/10.1.0-RC1/
> > > [2]https://raw.githubusercontent.com/apache/
> > incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes
> > > [3] https://www.apache.org/dev/release.html#approving-a-release
> > > [4]https://cwiki.apache.org/confluence/display/NUTTX/
> > Validating+a+staged+Release
> >
> >
> >
> > --
> > Gustavo Henrique Nihei
> >
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Alan Carvalho de Assis <ac...@gmail.com>.
Yes, this fix is important for all RISC-V MCUs
BR,
Alan
On Saturday, May 1, 2021, Gustavo Henrique Nihei <gh...@gmail.com> wrote:
> Hi folks,
>
> I believe we still need to backport this PR
> https://github.com/apache/incubator-nuttx/pull/3636 (already labelled)
> It is a complement to
> https://github.com/apache/incubator-nuttx/pull/3614, which has been
> recently backported.
> Both address the issue of stack alignment for RISC-V chips.
>
> Best regards,
> Gustavo.
>
> On Sat, May 1, 2021 at 3:50 AM Alin Jerpelea <je...@gmail.com> wrote:
> >
> > Hello all,
> > Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and it's
> > time to vote on accepting it for release. If approved we will seek
> > final release approval from the IPMC. Voting will be open for 72hr.
> >
> > A minimum of 3 binding +1 votes and more binding +1 than binding -1 are
> > required to pass.
> >
> > The Apache requirements for approving a release can be found here [3]
> > "Before voting +1 [P]PMC members are required to download the signed
> > source code package, compile it as provided, and test the resulting
> > executable on their own platform, along with also verifying that the
> > package meets the requirements of the ASF policy on releases."
> >
> > A document to walk through some of this process has been published on
> > our project wiki and can be found here [4].
> >
> > [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> > items in [4])
> > [ ] -1 reject (explanation required)
> >
> > Thank you all,
> > Alin Jerpelea
> >
> > SCM Information:
> > Release tag: nuttx-10.1.0-RC1
> > Hash for the release incubating-nuttx tag:
> > 4348d91d1356335483089c3865282d80f13bedcd
> > Hash for the release incubating-nuttx-apps tag:
> > 112d709609e4916b21e435152679cd0b5f3177fb
> >
> > [1] https://dist.apache.org/repos/dist/dev/incubator/nuttx/10.1.0-RC1/
> > [2]https://raw.githubusercontent.com/apache/
> incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes
> > [3] https://www.apache.org/dev/release.html#approving-a-release
> > [4]https://cwiki.apache.org/confluence/display/NUTTX/
> Validating+a+staged+Release
>
>
>
> --
> Gustavo Henrique Nihei
>
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Gustavo Henrique Nihei <gh...@gmail.com>.
Hi folks,
I believe we still need to backport this PR
https://github.com/apache/incubator-nuttx/pull/3636 (already labelled)
It is a complement to
https://github.com/apache/incubator-nuttx/pull/3614, which has been
recently backported.
Both address the issue of stack alignment for RISC-V chips.
Best regards,
Gustavo.
On Sat, May 1, 2021 at 3:50 AM Alin Jerpelea <je...@gmail.com> wrote:
>
> Hello all,
> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and it's
> time to vote on accepting it for release. If approved we will seek
> final release approval from the IPMC. Voting will be open for 72hr.
>
> A minimum of 3 binding +1 votes and more binding +1 than binding -1 are
> required to pass.
>
> The Apache requirements for approving a release can be found here [3]
> "Before voting +1 [P]PMC members are required to download the signed
> source code package, compile it as provided, and test the resulting
> executable on their own platform, along with also verifying that the
> package meets the requirements of the ASF policy on releases."
>
> A document to walk through some of this process has been published on
> our project wiki and can be found here [4].
>
> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> items in [4])
> [ ] -1 reject (explanation required)
>
> Thank you all,
> Alin Jerpelea
>
> SCM Information:
> Release tag: nuttx-10.1.0-RC1
> Hash for the release incubating-nuttx tag:
> 4348d91d1356335483089c3865282d80f13bedcd
> Hash for the release incubating-nuttx-apps tag:
> 112d709609e4916b21e435152679cd0b5f3177fb
>
> [1] https://dist.apache.org/repos/dist/dev/incubator/nuttx/10.1.0-RC1/
> [2]https://raw.githubusercontent.com/apache/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes
> [3] https://www.apache.org/dev/release.html#approving-a-release
> [4]https://cwiki.apache.org/confluence/display/NUTTX/Validating+a+staged+Release
--
Gustavo Henrique Nihei
Re: [VOTE] Apache NuttX 10.1.0 (incubating) RC1 release
Posted by Xiang Xiao <xi...@gmail.com>.
+1,
test with sim+wsl2
On Sat, May 1, 2021 at 2:50 PM Alin Jerpelea <je...@gmail.com> wrote:
> Hello all,
> Apache NuttX (Incubating) 10.1.0 RC1 has been staged under [1] and it's
> time to vote on accepting it for release. If approved we will seek
> final release approval from the IPMC. Voting will be open for 72hr.
>
> A minimum of 3 binding +1 votes and more binding +1 than binding -1 are
> required to pass.
>
> The Apache requirements for approving a release can be found here [3]
> "Before voting +1 [P]PMC members are required to download the signed
> source code package, compile it as provided, and test the resulting
> executable on their own platform, along with also verifying that the
> package meets the requirements of the ASF policy on releases."
>
> A document to walk through some of this process has been published on
> our project wiki and can be found here [4].
>
> [ ] +1 accept (indicate what you validated - e.g. performed the non-RM
> items in [4])
> [ ] -1 reject (explanation required)
>
> Thank you all,
> Alin Jerpelea
>
> SCM Information:
> Release tag: nuttx-10.1.0-RC1
> Hash for the release incubating-nuttx tag:
> 4348d91d1356335483089c3865282d80f13bedcd
> Hash for the release incubating-nuttx-apps tag:
> 112d709609e4916b21e435152679cd0b5f3177fb
>
> [1] https://dist.apache.org/repos/dist/dev/incubator/nuttx/10.1.0-RC1/
> [2]
> https://raw.githubusercontent.com/apache/incubator-nuttx/nuttx-10.1.0-RC1/ReleaseNotes
> [3] https://www.apache.org/dev/release.html#approving-a-release
> [4]
> https://cwiki.apache.org/confluence/display/NUTTX/Validating+a+staged+Release
>