You are viewing a plain text version of this content. The canonical link for it is here.
Posted to general@incubator.apache.org by Chunjin Mu <mu...@apache.org> on 2023/06/26 02:44:47 UTC
[VOTE] Release Apache StreamPark(Incubating) 2.1.1-rc1
Hello Incubator Community:
This is a call for a vote to release Apache StreamPark(Incubating) version
2.1.1-RC1.
The Apache StreamPark community has voted on and approved a proposal to
release Apache StreamPark(Incubating) version 2.1.1-RC1.
We now kindly request the Incubator PMC members review and vote on this
incubator release.
Apache StreamPark, Make stream processing easier! easy-to-use streaming
application development framework and operation platform.
StreamPark community vote thread:
https://lists.apache.org/thread/mxrp760t5xy1fd6rs3fggj0cxrh7lohb
Vote result thread:
https://lists.apache.org/thread/6rhodhnblrs8n1vwcoxzmb0knb81sw66
The release candidates:
https://dist.apache.org/repos/dist/dev/incubator/streampark/2.1.1-RC1/
Git tag for the release:
https://github.com/apache/incubator-streampark/releases/tag/v2.1.1-rc1
The artifacts signed with PGP key [E3E3F36B], corresponding to [
muchunjin@apache.org], that can be found in keys file:
https://downloads.apache.org/incubator/streampark/KEYS
The vote will be open for at least 72 hours or until the necessary number
of votes are reached.
Please vote accordingly:
[ ] +1 approve
[ ] +0 no opinion
[ ] -1 disapprove with the reason
More detailed checklist please refer:
•
https://cwiki.apache.org/confluence/display/INCUBATOR/Incubator+Release+Checklist
Steps to validate the release， Please refer to:
• https://www.apache.org/info/verification.html
• https://streampark.apache.org/community/release/how-to-verify
How to Build:
1) clone source code:
> git clone -b v2.1.1-rc1 git@github.com:apache/incubator-streampark.git
2) build project:
> cd incubator-streampark && sh ./build.sh
or compile by
mvn -Pscala-2.11,shaded,webapp,dist -DskipTests clean install
mvn -Pscala-2.12,shaded,webapp,dist -DskipTests clean install
Thanks,
On behalf of Apache StreamPark(Incubating) community
Best,
ChunJin Mu
Re: [VOTE] Release Apache StreamPark(Incubating) 2.1.1-rc1
Posted by tison <wa...@gmail.com>.
+1 (binding)
I checked:
* The checksums and signatures are validated.
* The LICENSE and NOTICE files look good to me.
* There is DISCLAIMER-WIP
* No binary files in the source release
* I can build the binary from the source kit.
Best,
tison.
Kent Yao <ya...@apache.org> 于2023年6月29日周四 10:58写道：
> +1 (nonbinding), I have checked:
>
> [✓] The checksums and signatures are validated
> [✓] The LICENSE and NOTICE are fine
> [✓] DISCLAIMER-WIP is present
> [✓] No binary files in the source release
> [✓] Successfully build the binary from the source
>
> Kent Yao
>
>
> On 2023/06/29 02:44:02 Huajie Wang wrote:
> > hi PJ:
> >
> >
> > this issue[1] has been fixed[2]. Thanks for your careful review work and
> voting.
> >
> > [1] https://github.com/apache/incubator-streampark/issues/2815
> >
> > [2] https://github.com/apache/incubator-streampark/pull/2817
> >
> >
> > Best,
> > Huajie Wang
> >
> >
> >
> > PJ Fanning <fa...@apache.org> 于2023年6月27日周二 23:19写道：
> >
> > > +1 (binding)
> > >
> > > I checked the source and binary tar.gz files.
> > > - asc and sha512 files are valid
> > > - LICENSE and NOTICE look ok - I did raise an small issue in your
> GitHub
> > > issues [1]
> > > - DISCLAIMER is in the tar.gz files
> > > - no jars in src tar.gz
> > > - I built the jars from scratch using the src tar.gz with no issues
> > >
> > > [1] https://github.com/apache/incubator-streampark/issues/2815
> > >
> > > On 2023/06/27 11:34:52 Willem Jiang wrote:
> > > > +1 (binding)
> > > > Here is what I checked:
> > > > - The checksums and signatures are validated.
> > > > - The LICENSE and NOTICE files look good to me.
> > > > - There is DISCLAIMER-WIP
> > > > - No binary files in the source release
> > > > - I can build the binary from the source kit.
> > > >
> > > >
> > > > Willem Jiang
> > > >
> > > > Twitter: willemjiang
> > > > Weibo: 姜宁willem
> > > >
> > > >
> > > > On Mon, Jun 26, 2023 at 10:44 AM Chunjin Mu <mu...@apache.org>
> > > wrote:
> > > > >
> > > > > Hello Incubator Community:
> > > > >
> > > > > This is a call for a vote to release Apache StreamPark(Incubating)
> > > version 2.1.1-RC1.
> > > > > The Apache StreamPark community has voted on and approved a
> proposal
> > > to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> > > > > We now kindly request the Incubator PMC members review and vote on
> > > this incubator release.
> > > > > Apache StreamPark, Make stream processing easier! easy-to-use
> > > streaming application development framework and operation platform.
> > > > >
> > > > > StreamPark community vote thread:
> > > > > https://lists.apache.org/thread/mxrp760t5xy1fd6rs3fggj0cxrh7lohb
> > > > >
> > > > > Vote result thread:
> > > > > https://lists.apache.org/thread/6rhodhnblrs8n1vwcoxzmb0knb81sw66
> > > > >
> > > > > The release candidates:
> > > > >
> https://dist.apache.org/repos/dist/dev/incubator/streampark/2.1.1-RC1/
> > > > >
> > > > > Git tag for the release:
> > > > >
> https://github.com/apache/incubator-streampark/releases/tag/v2.1.1-rc1
> > > > >
> > > > > The artifacts signed with PGP key [E3E3F36B], corresponding to [
> > > muchunjin@apache.org], that can be found in keys file:
> > > > > https://downloads.apache.org/incubator/streampark/KEYS
> > > > >
> > > > > The vote will be open for at least 72 hours or until the necessary
> > > number of votes are reached.
> > > > >
> > > > > Please vote accordingly:
> > > > > [ ] +1 approve
> > > > > [ ] +0 no opinion
> > > > > [ ] -1 disapprove with the reason
> > > > >
> > > > > More detailed checklist please refer:
> > > > > •
> > >
> https://cwiki.apache.org/confluence/display/INCUBATOR/Incubator+Release+Checklist
> > > > >
> > > > > Steps to validate the release， Please refer to:
> > > > > • https://www.apache.org/info/verification.html
> > > > > • https://streampark.apache.org/community/release/how-to-verify
> > > > >
> > > > >
> > > > > How to Build:
> > > > >
> > > > > 1) clone source code:
> > > > > > git clone -b v2.1.1-rc1 git@github.com:
> > > apache/incubator-streampark.git
> > > > >
> > > > > 2) build project:
> > > > > > cd incubator-streampark && sh ./build.sh
> > > > >
> > > > > or compile by
> > > > > mvn -Pscala-2.11,shaded,webapp,dist -DskipTests clean install
> > > > > mvn -Pscala-2.12,shaded,webapp,dist -DskipTests clean install
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Thanks,
> > > > >
> > > > > On behalf of Apache StreamPark(Incubating) community
> > > > >
> > > > >
> > > > > Best,
> > > > > ChunJin Mu
> > > >
> > > > ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> > > > For additional commands, e-mail: general-help@incubator.apache.org
> > > >
> > > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> > > For additional commands, e-mail: general-help@incubator.apache.org
> > >
> > >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> For additional commands, e-mail: general-help@incubator.apache.org
>
>
Re: [VOTE] Release Apache StreamPark(Incubating) 2.1.1-rc1
Posted by Kent Yao <ya...@apache.org>.
+1 (nonbinding), I have checked:
[✓] The checksums and signatures are validated
[✓] The LICENSE and NOTICE are fine
[✓] DISCLAIMER-WIP is present
[✓] No binary files in the source release
[✓] Successfully build the binary from the source
Kent Yao
On 2023/06/29 02:44:02 Huajie Wang wrote:
> hi PJ:
>
>
> this issue[1] has been fixed[2]. Thanks for your careful review work and voting.
>
> [1] https://github.com/apache/incubator-streampark/issues/2815
>
> [2] https://github.com/apache/incubator-streampark/pull/2817
>
>
> Best,
> Huajie Wang
>
>
>
> PJ Fanning <fa...@apache.org> 于2023年6月27日周二 23:19写道：
>
> > +1 (binding)
> >
> > I checked the source and binary tar.gz files.
> > - asc and sha512 files are valid
> > - LICENSE and NOTICE look ok - I did raise an small issue in your GitHub
> > issues [1]
> > - DISCLAIMER is in the tar.gz files
> > - no jars in src tar.gz
> > - I built the jars from scratch using the src tar.gz with no issues
> >
> > [1] https://github.com/apache/incubator-streampark/issues/2815
> >
> > On 2023/06/27 11:34:52 Willem Jiang wrote:
> > > +1 (binding)
> > > Here is what I checked:
> > > - The checksums and signatures are validated.
> > > - The LICENSE and NOTICE files look good to me.
> > > - There is DISCLAIMER-WIP
> > > - No binary files in the source release
> > > - I can build the binary from the source kit.
> > >
> > >
> > > Willem Jiang
> > >
> > > Twitter: willemjiang
> > > Weibo: 姜宁willem
> > >
> > >
> > > On Mon, Jun 26, 2023 at 10:44 AM Chunjin Mu <mu...@apache.org>
> > wrote:
> > > >
> > > > Hello Incubator Community:
> > > >
> > > > This is a call for a vote to release Apache StreamPark(Incubating)
> > version 2.1.1-RC1.
> > > > The Apache StreamPark community has voted on and approved a proposal
> > to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> > > > We now kindly request the Incubator PMC members review and vote on
> > this incubator release.
> > > > Apache StreamPark, Make stream processing easier! easy-to-use
> > streaming application development framework and operation platform.
> > > >
> > > > StreamPark community vote thread:
> > > > https://lists.apache.org/thread/mxrp760t5xy1fd6rs3fggj0cxrh7lohb
> > > >
> > > > Vote result thread:
> > > > https://lists.apache.org/thread/6rhodhnblrs8n1vwcoxzmb0knb81sw66
> > > >
> > > > The release candidates:
> > > > https://dist.apache.org/repos/dist/dev/incubator/streampark/2.1.1-RC1/
> > > >
> > > > Git tag for the release:
> > > > https://github.com/apache/incubator-streampark/releases/tag/v2.1.1-rc1
> > > >
> > > > The artifacts signed with PGP key [E3E3F36B], corresponding to [
> > muchunjin@apache.org], that can be found in keys file:
> > > > https://downloads.apache.org/incubator/streampark/KEYS
> > > >
> > > > The vote will be open for at least 72 hours or until the necessary
> > number of votes are reached.
> > > >
> > > > Please vote accordingly:
> > > > [ ] +1 approve
> > > > [ ] +0 no opinion
> > > > [ ] -1 disapprove with the reason
> > > >
> > > > More detailed checklist please refer:
> > > > •
> > https://cwiki.apache.org/confluence/display/INCUBATOR/Incubator+Release+Checklist
> > > >
> > > > Steps to validate the release， Please refer to:
> > > > • https://www.apache.org/info/verification.html
> > > > • https://streampark.apache.org/community/release/how-to-verify
> > > >
> > > >
> > > > How to Build:
> > > >
> > > > 1) clone source code:
> > > > > git clone -b v2.1.1-rc1 git@github.com:
> > apache/incubator-streampark.git
> > > >
> > > > 2) build project:
> > > > > cd incubator-streampark && sh ./build.sh
> > > >
> > > > or compile by
> > > > mvn -Pscala-2.11,shaded,webapp,dist -DskipTests clean install
> > > > mvn -Pscala-2.12,shaded,webapp,dist -DskipTests clean install
> > > >
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > > On behalf of Apache StreamPark(Incubating) community
> > > >
> > > >
> > > > Best,
> > > > ChunJin Mu
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> > > For additional commands, e-mail: general-help@incubator.apache.org
> > >
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> > For additional commands, e-mail: general-help@incubator.apache.org
> >
> >
>
---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org
Re: [VOTE] Release Apache StreamPark(Incubating) 2.1.1-rc1
Posted by Huajie Wang <be...@apache.org>.
hi PJ:
this issue[1] has been fixed[2]. Thanks for your careful review work and voting.
[1] https://github.com/apache/incubator-streampark/issues/2815
[2] https://github.com/apache/incubator-streampark/pull/2817
Best,
Huajie Wang
PJ Fanning <fa...@apache.org> 于2023年6月27日周二 23:19写道：
> +1 (binding)
>
> I checked the source and binary tar.gz files.
> - asc and sha512 files are valid
> - LICENSE and NOTICE look ok - I did raise an small issue in your GitHub
> issues [1]
> - DISCLAIMER is in the tar.gz files
> - no jars in src tar.gz
> - I built the jars from scratch using the src tar.gz with no issues
>
> [1] https://github.com/apache/incubator-streampark/issues/2815
>
> On 2023/06/27 11:34:52 Willem Jiang wrote:
> > +1 (binding)
> > Here is what I checked:
> > - The checksums and signatures are validated.
> > - The LICENSE and NOTICE files look good to me.
> > - There is DISCLAIMER-WIP
> > - No binary files in the source release
> > - I can build the binary from the source kit.
> >
> >
> > Willem Jiang
> >
> > Twitter: willemjiang
> > Weibo: 姜宁willem
> >
> >
> > On Mon, Jun 26, 2023 at 10:44 AM Chunjin Mu <mu...@apache.org>
> wrote:
> > >
> > > Hello Incubator Community:
> > >
> > > This is a call for a vote to release Apache StreamPark(Incubating)
> version 2.1.1-RC1.
> > > The Apache StreamPark community has voted on and approved a proposal
> to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> > > We now kindly request the Incubator PMC members review and vote on
> this incubator release.
> > > Apache StreamPark, Make stream processing easier! easy-to-use
> streaming application development framework and operation platform.
> > >
> > > StreamPark community vote thread:
> > > https://lists.apache.org/thread/mxrp760t5xy1fd6rs3fggj0cxrh7lohb
> > >
> > > Vote result thread:
> > > https://lists.apache.org/thread/6rhodhnblrs8n1vwcoxzmb0knb81sw66
> > >
> > > The release candidates:
> > > https://dist.apache.org/repos/dist/dev/incubator/streampark/2.1.1-RC1/
> > >
> > > Git tag for the release:
> > > https://github.com/apache/incubator-streampark/releases/tag/v2.1.1-rc1
> > >
> > > The artifacts signed with PGP key [E3E3F36B], corresponding to [
> muchunjin@apache.org], that can be found in keys file:
> > > https://downloads.apache.org/incubator/streampark/KEYS
> > >
> > > The vote will be open for at least 72 hours or until the necessary
> number of votes are reached.
> > >
> > > Please vote accordingly:
> > > [ ] +1 approve
> > > [ ] +0 no opinion
> > > [ ] -1 disapprove with the reason
> > >
> > > More detailed checklist please refer:
> > > •
> https://cwiki.apache.org/confluence/display/INCUBATOR/Incubator+Release+Checklist
> > >
> > > Steps to validate the release， Please refer to:
> > > • https://www.apache.org/info/verification.html
> > > • https://streampark.apache.org/community/release/how-to-verify
> > >
> > >
> > > How to Build:
> > >
> > > 1) clone source code:
> > > > git clone -b v2.1.1-rc1 git@github.com:
> apache/incubator-streampark.git
> > >
> > > 2) build project:
> > > > cd incubator-streampark && sh ./build.sh
> > >
> > > or compile by
> > > mvn -Pscala-2.11,shaded,webapp,dist -DskipTests clean install
> > > mvn -Pscala-2.12,shaded,webapp,dist -DskipTests clean install
> > >
> > >
> > >
> > >
> > > Thanks,
> > >
> > > On behalf of Apache StreamPark(Incubating) community
> > >
> > >
> > > Best,
> > > ChunJin Mu
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> > For additional commands, e-mail: general-help@incubator.apache.org
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> For additional commands, e-mail: general-help@incubator.apache.org
>
>
Re: [VOTE] Release Apache StreamPark(Incubating) 2.1.1-rc1
Posted by PJ Fanning <fa...@apache.org>.
+1 (binding)
I checked the source and binary tar.gz files.
- asc and sha512 files are valid
- LICENSE and NOTICE look ok - I did raise an small issue in your GitHub issues [1]
- DISCLAIMER is in the tar.gz files
- no jars in src tar.gz
- I built the jars from scratch using the src tar.gz with no issues
[1] https://github.com/apache/incubator-streampark/issues/2815
On 2023/06/27 11:34:52 Willem Jiang wrote:
> +1 (binding)
> Here is what I checked:
> - The checksums and signatures are validated.
> - The LICENSE and NOTICE files look good to me.
> - There is DISCLAIMER-WIP
> - No binary files in the source release
> - I can build the binary from the source kit.
>
>
> Willem Jiang
>
> Twitter: willemjiang
> Weibo: 姜宁willem
>
>
> On Mon, Jun 26, 2023 at 10:44 AM Chunjin Mu <mu...@apache.org> wrote:
> >
> > Hello Incubator Community:
> >
> > This is a call for a vote to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> > The Apache StreamPark community has voted on and approved a proposal to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> > We now kindly request the Incubator PMC members review and vote on this incubator release.
> > Apache StreamPark, Make stream processing easier! easy-to-use streaming application development framework and operation platform.
> >
> > StreamPark community vote thread:
> > https://lists.apache.org/thread/mxrp760t5xy1fd6rs3fggj0cxrh7lohb
> >
> > Vote result thread:
> > https://lists.apache.org/thread/6rhodhnblrs8n1vwcoxzmb0knb81sw66
> >
> > The release candidates:
> > https://dist.apache.org/repos/dist/dev/incubator/streampark/2.1.1-RC1/
> >
> > Git tag for the release:
> > https://github.com/apache/incubator-streampark/releases/tag/v2.1.1-rc1
> >
> > The artifacts signed with PGP key [E3E3F36B], corresponding to [muchunjin@apache.org], that can be found in keys file:
> > https://downloads.apache.org/incubator/streampark/KEYS
> >
> > The vote will be open for at least 72 hours or until the necessary number of votes are reached.
> >
> > Please vote accordingly:
> > [ ] +1 approve
> > [ ] +0 no opinion
> > [ ] -1 disapprove with the reason
> >
> > More detailed checklist please refer:
> > • https://cwiki.apache.org/confluence/display/INCUBATOR/Incubator+Release+Checklist
> >
> > Steps to validate the release， Please refer to:
> > • https://www.apache.org/info/verification.html
> > • https://streampark.apache.org/community/release/how-to-verify
> >
> >
> > How to Build:
> >
> > 1) clone source code:
> > > git clone -b v2.1.1-rc1 git@github.com:apache/incubator-streampark.git
> >
> > 2) build project:
> > > cd incubator-streampark && sh ./build.sh
> >
> > or compile by
> > mvn -Pscala-2.11,shaded,webapp,dist -DskipTests clean install
> > mvn -Pscala-2.12,shaded,webapp,dist -DskipTests clean install
> >
> >
> >
> >
> > Thanks,
> >
> > On behalf of Apache StreamPark(Incubating) community
> >
> >
> > Best,
> > ChunJin Mu
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
> For additional commands, e-mail: general-help@incubator.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org
Re: [VOTE] Release Apache StreamPark(Incubating) 2.1.1-rc1
Posted by Willem Jiang <wi...@gmail.com>.
+1 (binding)
Here is what I checked:
- The checksums and signatures are validated.
- The LICENSE and NOTICE files look good to me.
- There is DISCLAIMER-WIP
- No binary files in the source release
- I can build the binary from the source kit.
Willem Jiang
Twitter: willemjiang
Weibo: 姜宁willem
On Mon, Jun 26, 2023 at 10:44 AM Chunjin Mu <mu...@apache.org> wrote:
>
> Hello Incubator Community:
>
> This is a call for a vote to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> The Apache StreamPark community has voted on and approved a proposal to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> We now kindly request the Incubator PMC members review and vote on this incubator release.
> Apache StreamPark, Make stream processing easier! easy-to-use streaming application development framework and operation platform.
>
> StreamPark community vote thread:
> https://lists.apache.org/thread/mxrp760t5xy1fd6rs3fggj0cxrh7lohb
>
> Vote result thread:
> https://lists.apache.org/thread/6rhodhnblrs8n1vwcoxzmb0knb81sw66
>
> The release candidates:
> https://dist.apache.org/repos/dist/dev/incubator/streampark/2.1.1-RC1/
>
> Git tag for the release:
> https://github.com/apache/incubator-streampark/releases/tag/v2.1.1-rc1
>
> The artifacts signed with PGP key [E3E3F36B], corresponding to [muchunjin@apache.org], that can be found in keys file:
> https://downloads.apache.org/incubator/streampark/KEYS
>
> The vote will be open for at least 72 hours or until the necessary number of votes are reached.
>
> Please vote accordingly:
> [ ] +1 approve
> [ ] +0 no opinion
> [ ] -1 disapprove with the reason
>
> More detailed checklist please refer:
> • https://cwiki.apache.org/confluence/display/INCUBATOR/Incubator+Release+Checklist
>
> Steps to validate the release， Please refer to:
> • https://www.apache.org/info/verification.html
> • https://streampark.apache.org/community/release/how-to-verify
>
>
> How to Build:
>
> 1) clone source code:
> > git clone -b v2.1.1-rc1 git@github.com:apache/incubator-streampark.git
>
> 2) build project:
> > cd incubator-streampark && sh ./build.sh
>
> or compile by
> mvn -Pscala-2.11,shaded,webapp,dist -DskipTests clean install
> mvn -Pscala-2.12,shaded,webapp,dist -DskipTests clean install
>
>
>
>
> Thanks,
>
> On behalf of Apache StreamPark(Incubating) community
>
>
> Best,
> ChunJin Mu
Re: [VOTE] Release Apache StreamPark(Incubating) 2.1.1-rc1
Posted by Willem Jiang <wi...@gmail.com>.
+1 (binding)
Here is what I checked:
- The checksums and signatures are validated.
- The LICENSE and NOTICE files look good to me.
- There is DISCLAIMER-WIP
- No binary files in the source release
- I can build the binary from the source kit.
Willem Jiang
Twitter: willemjiang
Weibo: 姜宁willem
On Mon, Jun 26, 2023 at 10:44 AM Chunjin Mu <mu...@apache.org> wrote:
>
> Hello Incubator Community:
>
> This is a call for a vote to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> The Apache StreamPark community has voted on and approved a proposal to release Apache StreamPark(Incubating) version 2.1.1-RC1.
> We now kindly request the Incubator PMC members review and vote on this incubator release.
> Apache StreamPark, Make stream processing easier! easy-to-use streaming application development framework and operation platform.
>
> StreamPark community vote thread:
> https://lists.apache.org/thread/mxrp760t5xy1fd6rs3fggj0cxrh7lohb
>
> Vote result thread:
> https://lists.apache.org/thread/6rhodhnblrs8n1vwcoxzmb0knb81sw66
>
> The release candidates:
> https://dist.apache.org/repos/dist/dev/incubator/streampark/2.1.1-RC1/
>
> Git tag for the release:
> https://github.com/apache/incubator-streampark/releases/tag/v2.1.1-rc1
>
> The artifacts signed with PGP key [E3E3F36B], corresponding to [muchunjin@apache.org], that can be found in keys file:
> https://downloads.apache.org/incubator/streampark/KEYS
>
> The vote will be open for at least 72 hours or until the necessary number of votes are reached.
>
> Please vote accordingly:
> [ ] +1 approve
> [ ] +0 no opinion
> [ ] -1 disapprove with the reason
>
> More detailed checklist please refer:
> • https://cwiki.apache.org/confluence/display/INCUBATOR/Incubator+Release+Checklist
>
> Steps to validate the release， Please refer to:
> • https://www.apache.org/info/verification.html
> • https://streampark.apache.org/community/release/how-to-verify
>
>
> How to Build:
>
> 1) clone source code:
> > git clone -b v2.1.1-rc1 git@github.com:apache/incubator-streampark.git
>
> 2) build project:
> > cd incubator-streampark && sh ./build.sh
>
> or compile by
> mvn -Pscala-2.11,shaded,webapp,dist -DskipTests clean install
> mvn -Pscala-2.12,shaded,webapp,dist -DskipTests clean install
>
>
>
>
> Thanks,
>
> On behalf of Apache StreamPark(Incubating) community
>
>
> Best,
> ChunJin Mu
---------------------------------------------------------------------
To unsubscribe, e-mail: general-unsubscribe@incubator.apache.org
For additional commands, e-mail: general-help@incubator.apache.org