You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by James Green <ja...@gmail.com> on 2012/10/26 17:34:31 UTC
AMQ 5.7.0: Stomp trace does not log frames
log4j.properties:
log4j.rootLogger=INFO, console, logfile
log4j.logger.org.apache.activemq.spring=WARN
log4j.logger.org.apache.activemq.web.handler=WARN
log4j.logger.org.springframework=WARN
log4j.logger.org.apache.xbean=WARN
log4j.logger.org.apache.camel=ERROR
log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
# Or for more fine grained debug logging uncomment one of these
log4j.logger.org.apache.activemq=DEBUG
#log4j.logger.org.apache.camel=DEBUG
# Console appender
log4j.appender.console=org.apache.log4j.ConsoleAppender
log4j.appender.console.layout=org.apache.log4j.PatternLayout
log4j.appender.console.layout.ConversionPattern=%5p | %m%n
log4j.appender.console.threshold=INFO
# File appender
log4j.appender.logfile=org.apache.log4j.RollingFileAppender
log4j.appender.logfile.file=${activemq.base}/data/activemq.log
log4j.appender.logfile.maxFileSize=1024KB
log4j.appender.logfile.maxBackupIndex=5
log4j.appender.logfile.append=true
log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c | %t%n
#log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
#log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
#log4j.appender.kahadb.maxFileSize=1024KB
#log4j.appender.kahadb.maxBackupIndex=5
#log4j.appender.kahadb.append=true
#log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
#log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
%-30.30c{1} - %m%n
#log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE, kahadb
log4j.appender.stomp=org.apache.log4j.RollingFileAppender
log4j.appender.stomp.file=${activemq.base}/data/stomp.log
log4j.appender.stomp.maxFileSize=1024KB
log4j.appender.stomp.maxBackupIndex=5
log4j.appender.stomp.append=true
log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
%-30.30c{1} - %m%n
# enable this line and disable the above if you just want the frame IO.
#log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
log4j.additivity.org.apache.activemq.transport.stomp=false
TransportConnector:
<transportConnector name="stomp" uri="stomp://localhost:61612?trace=true"/>
The stomp.log holds only:
2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
write check: 0
2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
write check: 0
2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
write check: 0
2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
write check: 0
2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
write check: 0
2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
Where are the frames?
I need to understand why a consumer is being starved of messages after a
while.
Thanks,
James
Re: AMQ 5.7.0: Stomp trace does not log frames
Posted by Christian Posta <ch...@gmail.com>.
Fixed in https://issues.apache.org/jira/browse/AMQ-4145
On Tue, Oct 30, 2012 at 8:30 AM, Christian Posta
<ch...@gmail.com>wrote:
> James,
>
> so using ?transport.trace=true should work for your case here.
>
> There is a bug with our introspection utils class that sets trace on the
> transport when configured using ?trace=true
>
> I opened this JIRA (https://issues.apache.org/jira/browse/AMQ-4145) and
> we resolve asap.
>
> Thanks,
> Christian
>
>
> On Tue, Oct 30, 2012 at 6:57 AM, Christian Posta <
> christian.posta@gmail.com> wrote:
>
>> James,
>>
>> I was wrong. The correct log4j logger would be this...
>>
>> log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE
>>
>> (therefore, your original setting would have been correct)
>>
>> but even so, there does seem to be an issue with "trace" being set on the
>> Stomp transport filter. I'm digging to see why...
>>
>>
>>
>> On Tue, Oct 30, 2012 at 2:26 AM, James Green <ja...@gmail.com>wrote:
>>
>>> That made no difference :(
>>>
>>> The entire log4j.properties file is below. If it helps the JMX console
>>> says
>>> that the stompURL property of the broker is
>>> stomp://localhost:61612?trace=true
>>>
>>> log4j.rootLogger=INFO, console, logfile
>>> log4j.logger.org.apache.activemq.spring=WARN
>>> log4j.logger.org.apache.activemq.web.handler=WARN
>>> log4j.logger.org.springframework=WARN
>>> log4j.logger.org.apache.xbean=WARN
>>> log4j.logger.org.apache.camel=ERROR
>>> log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
>>> log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
>>>
>>> # When debugging or reporting problems to the ActiveMQ team,
>>> # comment out the above lines and uncomment the next.
>>>
>>> #log4j.rootLogger=DEBUG, logfile, console
>>>
>>> # Or for more fine grained debug logging uncomment one of these
>>> log4j.logger.org.apache.activemq=DEBUG
>>> #log4j.logger.org.apache.camel=DEBUG
>>>
>>> # Console appender
>>> log4j.appender.console=org.apache.log4j.ConsoleAppender
>>> log4j.appender.console.layout=org.apache.log4j.PatternLayout
>>> log4j.appender.console.layout.ConversionPattern=%5p | %m%n
>>> log4j.appender.console.threshold=INFO
>>>
>>> # File appender
>>> log4j.appender.logfile=org.apache.log4j.RollingFileAppender
>>> log4j.appender.logfile.file=${activemq.base}/data/activemq.log
>>> log4j.appender.logfile.maxFileSize=20MB
>>> log4j.appender.logfile.maxBackupIndex=20
>>> log4j.appender.logfile.append=true
>>> log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
>>> log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c |
>>> %t%n
>>>
>>> #log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
>>> #log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
>>> #log4j.appender.kahadb.maxFileSize=1024KB
>>> #log4j.appender.kahadb.maxBackupIndex=5
>>> #log4j.appender.kahadb.append=true
>>> #log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
>>> #log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
>>> %-30.30c{1} - %m%n
>>> #log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE,
>>> kahadb
>>>
>>> log4j.appender.stomp=org.apache.log4j.RollingFileAppender
>>> log4j.appender.stomp.file=${activemq.base}/data/stomp.log
>>> log4j.appender.stomp.maxFileSize=1024KB
>>> log4j.appender.stomp.maxBackupIndex=5
>>> log4j.appender.stomp.append=true
>>> log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
>>> log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
>>> %-30.30c{1} - %m%n
>>>
>>> # enable this line and disable the above if you just want the frame IO.
>>> #log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
>>> log4j.additivity.org.apache.activemq.transport.stomp=false
>>>
>>> Thanks again,
>>>
>>> James
>>>
>>> On 29 October 2012 23:07, Christian Posta <ch...@gmail.com>
>>> wrote:
>>>
>>> > So setting ?trace=true should add a transport filter to the transports
>>> that
>>> > is in this class:
>>> > org.apache.activemq.transport.TransportLogger
>>> >
>>> > Can you try with the following settings
>>> >
>>> > log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
>>> >
>>> >
>>> > to get the logging you want?
>>> >
>>> > On Fri, Oct 26, 2012 at 8:34 AM, James Green <james.mk.green@gmail.com
>>> > >wrote:
>>> >
>>> > > log4j.properties:
>>> > >
>>> > > log4j.rootLogger=INFO, console, logfile
>>> > > log4j.logger.org.apache.activemq.spring=WARN
>>> > > log4j.logger.org.apache.activemq.web.handler=WARN
>>> > > log4j.logger.org.springframework=WARN
>>> > > log4j.logger.org.apache.xbean=WARN
>>> > > log4j.logger.org.apache.camel=ERROR
>>> > > log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
>>> > >
>>> > > # Or for more fine grained debug logging uncomment one of these
>>> > > log4j.logger.org.apache.activemq=DEBUG
>>> > > #log4j.logger.org.apache.camel=DEBUG
>>> > >
>>> > > # Console appender
>>> > > log4j.appender.console=org.apache.log4j.ConsoleAppender
>>> > > log4j.appender.console.layout=org.apache.log4j.PatternLayout
>>> > > log4j.appender.console.layout.ConversionPattern=%5p | %m%n
>>> > > log4j.appender.console.threshold=INFO
>>> > >
>>> > > # File appender
>>> > > log4j.appender.logfile=org.apache.log4j.RollingFileAppender
>>> > > log4j.appender.logfile.file=${activemq.base}/data/activemq.log
>>> > > log4j.appender.logfile.maxFileSize=1024KB
>>> > > log4j.appender.logfile.maxBackupIndex=5
>>> > > log4j.appender.logfile.append=true
>>> > > log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
>>> > > log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c |
>>> > %t%n
>>> > >
>>> > > #log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
>>> > > #log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
>>> > > #log4j.appender.kahadb.maxFileSize=1024KB
>>> > > #log4j.appender.kahadb.maxBackupIndex=5
>>> > > #log4j.appender.kahadb.append=true
>>> > > #log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
>>> > > #log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
>>> > > %-30.30c{1} - %m%n
>>> > > #log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE,
>>> > > kahadb
>>> > >
>>> > > log4j.appender.stomp=org.apache.log4j.RollingFileAppender
>>> > > log4j.appender.stomp.file=${activemq.base}/data/stomp.log
>>> > > log4j.appender.stomp.maxFileSize=1024KB
>>> > > log4j.appender.stomp.maxBackupIndex=5
>>> > > log4j.appender.stomp.append=true
>>> > > log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
>>> > > log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
>>> > > %-30.30c{1} - %m%n
>>> > >
>>> > > # enable this line and disable the above if you just want the frame
>>> IO.
>>> > > #log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE,
>>> stomp
>>> > > log4j.additivity.org.apache.activemq.transport.stomp=false
>>> > >
>>> > >
>>> > > TransportConnector:
>>> > > <transportConnector name="stomp"
>>> > uri="stomp://localhost:61612?trace=true"/>
>>> > >
>>> > > The stomp.log holds only:
>>> > > 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
>>> > > StompInactivityMonitor - Stomp Inactivity Monitor read
>>> check: 0,
>>> > > write check: 0
>>> > > 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
>>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>>> > > 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
>>> > > StompInactivityMonitor - Stomp Inactivity Monitor read
>>> check: 0,
>>> > > write check: 0
>>> > > 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
>>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>>> > > 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
>>> > > StompInactivityMonitor - Stomp Inactivity Monitor read
>>> check: 0,
>>> > > write check: 0
>>> > > 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
>>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>>> > > 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
>>> > > StompInactivityMonitor - Stomp Inactivity Monitor read
>>> check: 0,
>>> > > write check: 0
>>> > > 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
>>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>>> > > 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
>>> > > StompInactivityMonitor - Stomp Inactivity Monitor read
>>> check: 0,
>>> > > write check: 0
>>> > > 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
>>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>>> > >
>>> > > Where are the frames?
>>> > >
>>> > > I need to understand why a consumer is being starved of messages
>>> after a
>>> > > while.
>>> > >
>>> > > Thanks,
>>> > >
>>> > > James
>>> > >
>>> >
>>> >
>>> >
>>> > --
>>> > *Christian Posta*
>>> > http://www.christianposta.com/blog
>>> > twitter: @christianposta
>>> >
>>>
>>
>>
>>
>> --
>> *Christian Posta*
>> http://www.christianposta.com/blog
>> twitter: @christianposta
>>
>>
>
>
> --
> *Christian Posta*
> http://www.christianposta.com/blog
> twitter: @christianposta
>
>
--
*Christian Posta*
http://www.christianposta.com/blog
twitter: @christianposta
Re: AMQ 5.7.0: Stomp trace does not log frames
Posted by Christian Posta <ch...@gmail.com>.
James,
so using ?transport.trace=true should work for your case here.
There is a bug with our introspection utils class that sets trace on the
transport when configured using ?trace=true
I opened this JIRA (https://issues.apache.org/jira/browse/AMQ-4145) and we
resolve asap.
Thanks,
Christian
On Tue, Oct 30, 2012 at 6:57 AM, Christian Posta
<ch...@gmail.com>wrote:
> James,
>
> I was wrong. The correct log4j logger would be this...
>
> log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE
>
> (therefore, your original setting would have been correct)
>
> but even so, there does seem to be an issue with "trace" being set on the
> Stomp transport filter. I'm digging to see why...
>
>
>
> On Tue, Oct 30, 2012 at 2:26 AM, James Green <ja...@gmail.com>wrote:
>
>> That made no difference :(
>>
>> The entire log4j.properties file is below. If it helps the JMX console
>> says
>> that the stompURL property of the broker is
>> stomp://localhost:61612?trace=true
>>
>> log4j.rootLogger=INFO, console, logfile
>> log4j.logger.org.apache.activemq.spring=WARN
>> log4j.logger.org.apache.activemq.web.handler=WARN
>> log4j.logger.org.springframework=WARN
>> log4j.logger.org.apache.xbean=WARN
>> log4j.logger.org.apache.camel=ERROR
>> log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
>> log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
>>
>> # When debugging or reporting problems to the ActiveMQ team,
>> # comment out the above lines and uncomment the next.
>>
>> #log4j.rootLogger=DEBUG, logfile, console
>>
>> # Or for more fine grained debug logging uncomment one of these
>> log4j.logger.org.apache.activemq=DEBUG
>> #log4j.logger.org.apache.camel=DEBUG
>>
>> # Console appender
>> log4j.appender.console=org.apache.log4j.ConsoleAppender
>> log4j.appender.console.layout=org.apache.log4j.PatternLayout
>> log4j.appender.console.layout.ConversionPattern=%5p | %m%n
>> log4j.appender.console.threshold=INFO
>>
>> # File appender
>> log4j.appender.logfile=org.apache.log4j.RollingFileAppender
>> log4j.appender.logfile.file=${activemq.base}/data/activemq.log
>> log4j.appender.logfile.maxFileSize=20MB
>> log4j.appender.logfile.maxBackupIndex=20
>> log4j.appender.logfile.append=true
>> log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
>> log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c | %t%n
>>
>> #log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
>> #log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
>> #log4j.appender.kahadb.maxFileSize=1024KB
>> #log4j.appender.kahadb.maxBackupIndex=5
>> #log4j.appender.kahadb.append=true
>> #log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
>> #log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
>> %-30.30c{1} - %m%n
>> #log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE,
>> kahadb
>>
>> log4j.appender.stomp=org.apache.log4j.RollingFileAppender
>> log4j.appender.stomp.file=${activemq.base}/data/stomp.log
>> log4j.appender.stomp.maxFileSize=1024KB
>> log4j.appender.stomp.maxBackupIndex=5
>> log4j.appender.stomp.append=true
>> log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
>> log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
>> %-30.30c{1} - %m%n
>>
>> # enable this line and disable the above if you just want the frame IO.
>> #log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
>> log4j.additivity.org.apache.activemq.transport.stomp=false
>>
>> Thanks again,
>>
>> James
>>
>> On 29 October 2012 23:07, Christian Posta <ch...@gmail.com>
>> wrote:
>>
>> > So setting ?trace=true should add a transport filter to the transports
>> that
>> > is in this class:
>> > org.apache.activemq.transport.TransportLogger
>> >
>> > Can you try with the following settings
>> >
>> > log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
>> >
>> >
>> > to get the logging you want?
>> >
>> > On Fri, Oct 26, 2012 at 8:34 AM, James Green <james.mk.green@gmail.com
>> > >wrote:
>> >
>> > > log4j.properties:
>> > >
>> > > log4j.rootLogger=INFO, console, logfile
>> > > log4j.logger.org.apache.activemq.spring=WARN
>> > > log4j.logger.org.apache.activemq.web.handler=WARN
>> > > log4j.logger.org.springframework=WARN
>> > > log4j.logger.org.apache.xbean=WARN
>> > > log4j.logger.org.apache.camel=ERROR
>> > > log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
>> > >
>> > > # Or for more fine grained debug logging uncomment one of these
>> > > log4j.logger.org.apache.activemq=DEBUG
>> > > #log4j.logger.org.apache.camel=DEBUG
>> > >
>> > > # Console appender
>> > > log4j.appender.console=org.apache.log4j.ConsoleAppender
>> > > log4j.appender.console.layout=org.apache.log4j.PatternLayout
>> > > log4j.appender.console.layout.ConversionPattern=%5p | %m%n
>> > > log4j.appender.console.threshold=INFO
>> > >
>> > > # File appender
>> > > log4j.appender.logfile=org.apache.log4j.RollingFileAppender
>> > > log4j.appender.logfile.file=${activemq.base}/data/activemq.log
>> > > log4j.appender.logfile.maxFileSize=1024KB
>> > > log4j.appender.logfile.maxBackupIndex=5
>> > > log4j.appender.logfile.append=true
>> > > log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
>> > > log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c |
>> > %t%n
>> > >
>> > > #log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
>> > > #log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
>> > > #log4j.appender.kahadb.maxFileSize=1024KB
>> > > #log4j.appender.kahadb.maxBackupIndex=5
>> > > #log4j.appender.kahadb.append=true
>> > > #log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
>> > > #log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
>> > > %-30.30c{1} - %m%n
>> > > #log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE,
>> > > kahadb
>> > >
>> > > log4j.appender.stomp=org.apache.log4j.RollingFileAppender
>> > > log4j.appender.stomp.file=${activemq.base}/data/stomp.log
>> > > log4j.appender.stomp.maxFileSize=1024KB
>> > > log4j.appender.stomp.maxBackupIndex=5
>> > > log4j.appender.stomp.append=true
>> > > log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
>> > > log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
>> > > %-30.30c{1} - %m%n
>> > >
>> > > # enable this line and disable the above if you just want the frame
>> IO.
>> > > #log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
>> > > log4j.additivity.org.apache.activemq.transport.stomp=false
>> > >
>> > >
>> > > TransportConnector:
>> > > <transportConnector name="stomp"
>> > uri="stomp://localhost:61612?trace=true"/>
>> > >
>> > > The stomp.log holds only:
>> > > 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
>> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
>> 0,
>> > > write check: 0
>> > > 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>> > > 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
>> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
>> 0,
>> > > write check: 0
>> > > 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>> > > 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
>> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
>> 0,
>> > > write check: 0
>> > > 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>> > > 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
>> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
>> 0,
>> > > write check: 0
>> > > 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>> > > 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
>> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
>> 0,
>> > > write check: 0
>> > > 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
>> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>> > >
>> > > Where are the frames?
>> > >
>> > > I need to understand why a consumer is being starved of messages
>> after a
>> > > while.
>> > >
>> > > Thanks,
>> > >
>> > > James
>> > >
>> >
>> >
>> >
>> > --
>> > *Christian Posta*
>> > http://www.christianposta.com/blog
>> > twitter: @christianposta
>> >
>>
>
>
>
> --
> *Christian Posta*
> http://www.christianposta.com/blog
> twitter: @christianposta
>
>
--
*Christian Posta*
http://www.christianposta.com/blog
twitter: @christianposta
Re: AMQ 5.7.0: Stomp trace does not log frames
Posted by Christian Posta <ch...@gmail.com>.
James,
I was wrong. The correct log4j logger would be this...
log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE
(therefore, your original setting would have been correct)
but even so, there does seem to be an issue with "trace" being set on the
Stomp transport filter. I'm digging to see why...
On Tue, Oct 30, 2012 at 2:26 AM, James Green <ja...@gmail.com>wrote:
> That made no difference :(
>
> The entire log4j.properties file is below. If it helps the JMX console says
> that the stompURL property of the broker is
> stomp://localhost:61612?trace=true
>
> log4j.rootLogger=INFO, console, logfile
> log4j.logger.org.apache.activemq.spring=WARN
> log4j.logger.org.apache.activemq.web.handler=WARN
> log4j.logger.org.springframework=WARN
> log4j.logger.org.apache.xbean=WARN
> log4j.logger.org.apache.camel=ERROR
> log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
> log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
>
> # When debugging or reporting problems to the ActiveMQ team,
> # comment out the above lines and uncomment the next.
>
> #log4j.rootLogger=DEBUG, logfile, console
>
> # Or for more fine grained debug logging uncomment one of these
> log4j.logger.org.apache.activemq=DEBUG
> #log4j.logger.org.apache.camel=DEBUG
>
> # Console appender
> log4j.appender.console=org.apache.log4j.ConsoleAppender
> log4j.appender.console.layout=org.apache.log4j.PatternLayout
> log4j.appender.console.layout.ConversionPattern=%5p | %m%n
> log4j.appender.console.threshold=INFO
>
> # File appender
> log4j.appender.logfile=org.apache.log4j.RollingFileAppender
> log4j.appender.logfile.file=${activemq.base}/data/activemq.log
> log4j.appender.logfile.maxFileSize=20MB
> log4j.appender.logfile.maxBackupIndex=20
> log4j.appender.logfile.append=true
> log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
> log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c | %t%n
>
> #log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
> #log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
> #log4j.appender.kahadb.maxFileSize=1024KB
> #log4j.appender.kahadb.maxBackupIndex=5
> #log4j.appender.kahadb.append=true
> #log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
> #log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
> %-30.30c{1} - %m%n
> #log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE,
> kahadb
>
> log4j.appender.stomp=org.apache.log4j.RollingFileAppender
> log4j.appender.stomp.file=${activemq.base}/data/stomp.log
> log4j.appender.stomp.maxFileSize=1024KB
> log4j.appender.stomp.maxBackupIndex=5
> log4j.appender.stomp.append=true
> log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
> log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
> %-30.30c{1} - %m%n
>
> # enable this line and disable the above if you just want the frame IO.
> #log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
> log4j.additivity.org.apache.activemq.transport.stomp=false
>
> Thanks again,
>
> James
>
> On 29 October 2012 23:07, Christian Posta <ch...@gmail.com>
> wrote:
>
> > So setting ?trace=true should add a transport filter to the transports
> that
> > is in this class:
> > org.apache.activemq.transport.TransportLogger
> >
> > Can you try with the following settings
> >
> > log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
> >
> >
> > to get the logging you want?
> >
> > On Fri, Oct 26, 2012 at 8:34 AM, James Green <james.mk.green@gmail.com
> > >wrote:
> >
> > > log4j.properties:
> > >
> > > log4j.rootLogger=INFO, console, logfile
> > > log4j.logger.org.apache.activemq.spring=WARN
> > > log4j.logger.org.apache.activemq.web.handler=WARN
> > > log4j.logger.org.springframework=WARN
> > > log4j.logger.org.apache.xbean=WARN
> > > log4j.logger.org.apache.camel=ERROR
> > > log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
> > >
> > > # Or for more fine grained debug logging uncomment one of these
> > > log4j.logger.org.apache.activemq=DEBUG
> > > #log4j.logger.org.apache.camel=DEBUG
> > >
> > > # Console appender
> > > log4j.appender.console=org.apache.log4j.ConsoleAppender
> > > log4j.appender.console.layout=org.apache.log4j.PatternLayout
> > > log4j.appender.console.layout.ConversionPattern=%5p | %m%n
> > > log4j.appender.console.threshold=INFO
> > >
> > > # File appender
> > > log4j.appender.logfile=org.apache.log4j.RollingFileAppender
> > > log4j.appender.logfile.file=${activemq.base}/data/activemq.log
> > > log4j.appender.logfile.maxFileSize=1024KB
> > > log4j.appender.logfile.maxBackupIndex=5
> > > log4j.appender.logfile.append=true
> > > log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
> > > log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c |
> > %t%n
> > >
> > > #log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
> > > #log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
> > > #log4j.appender.kahadb.maxFileSize=1024KB
> > > #log4j.appender.kahadb.maxBackupIndex=5
> > > #log4j.appender.kahadb.append=true
> > > #log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
> > > #log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
> > > %-30.30c{1} - %m%n
> > > #log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE,
> > > kahadb
> > >
> > > log4j.appender.stomp=org.apache.log4j.RollingFileAppender
> > > log4j.appender.stomp.file=${activemq.base}/data/stomp.log
> > > log4j.appender.stomp.maxFileSize=1024KB
> > > log4j.appender.stomp.maxBackupIndex=5
> > > log4j.appender.stomp.append=true
> > > log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
> > > log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
> > > %-30.30c{1} - %m%n
> > >
> > > # enable this line and disable the above if you just want the frame IO.
> > > #log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
> > > log4j.additivity.org.apache.activemq.transport.stomp=false
> > >
> > >
> > > TransportConnector:
> > > <transportConnector name="stomp"
> > uri="stomp://localhost:61612?trace=true"/>
> > >
> > > The stomp.log holds only:
> > > 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
> 0,
> > > write check: 0
> > > 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > > 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
> 0,
> > > write check: 0
> > > 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > > 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
> 0,
> > > write check: 0
> > > 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > > 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
> 0,
> > > write check: 0
> > > 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > > 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
> > > StompInactivityMonitor - Stomp Inactivity Monitor read check:
> 0,
> > > write check: 0
> > > 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
> > > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > >
> > > Where are the frames?
> > >
> > > I need to understand why a consumer is being starved of messages after
> a
> > > while.
> > >
> > > Thanks,
> > >
> > > James
> > >
> >
> >
> >
> > --
> > *Christian Posta*
> > http://www.christianposta.com/blog
> > twitter: @christianposta
> >
>
--
*Christian Posta*
http://www.christianposta.com/blog
twitter: @christianposta
Re: AMQ 5.7.0: Stomp trace does not log frames
Posted by James Green <ja...@gmail.com>.
That made no difference :(
The entire log4j.properties file is below. If it helps the JMX console says
that the stompURL property of the broker is
stomp://localhost:61612?trace=true
log4j.rootLogger=INFO, console, logfile
log4j.logger.org.apache.activemq.spring=WARN
log4j.logger.org.apache.activemq.web.handler=WARN
log4j.logger.org.springframework=WARN
log4j.logger.org.apache.xbean=WARN
log4j.logger.org.apache.camel=ERROR
log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
# When debugging or reporting problems to the ActiveMQ team,
# comment out the above lines and uncomment the next.
#log4j.rootLogger=DEBUG, logfile, console
# Or for more fine grained debug logging uncomment one of these
log4j.logger.org.apache.activemq=DEBUG
#log4j.logger.org.apache.camel=DEBUG
# Console appender
log4j.appender.console=org.apache.log4j.ConsoleAppender
log4j.appender.console.layout=org.apache.log4j.PatternLayout
log4j.appender.console.layout.ConversionPattern=%5p | %m%n
log4j.appender.console.threshold=INFO
# File appender
log4j.appender.logfile=org.apache.log4j.RollingFileAppender
log4j.appender.logfile.file=${activemq.base}/data/activemq.log
log4j.appender.logfile.maxFileSize=20MB
log4j.appender.logfile.maxBackupIndex=20
log4j.appender.logfile.append=true
log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c | %t%n
#log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
#log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
#log4j.appender.kahadb.maxFileSize=1024KB
#log4j.appender.kahadb.maxBackupIndex=5
#log4j.appender.kahadb.append=true
#log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
#log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
%-30.30c{1} - %m%n
#log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE, kahadb
log4j.appender.stomp=org.apache.log4j.RollingFileAppender
log4j.appender.stomp.file=${activemq.base}/data/stomp.log
log4j.appender.stomp.maxFileSize=1024KB
log4j.appender.stomp.maxBackupIndex=5
log4j.appender.stomp.append=true
log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
%-30.30c{1} - %m%n
# enable this line and disable the above if you just want the frame IO.
#log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
log4j.additivity.org.apache.activemq.transport.stomp=false
Thanks again,
James
On 29 October 2012 23:07, Christian Posta <ch...@gmail.com> wrote:
> So setting ?trace=true should add a transport filter to the transports that
> is in this class:
> org.apache.activemq.transport.TransportLogger
>
> Can you try with the following settings
>
> log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
>
>
> to get the logging you want?
>
> On Fri, Oct 26, 2012 at 8:34 AM, James Green <james.mk.green@gmail.com
> >wrote:
>
> > log4j.properties:
> >
> > log4j.rootLogger=INFO, console, logfile
> > log4j.logger.org.apache.activemq.spring=WARN
> > log4j.logger.org.apache.activemq.web.handler=WARN
> > log4j.logger.org.springframework=WARN
> > log4j.logger.org.apache.xbean=WARN
> > log4j.logger.org.apache.camel=ERROR
> > log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
> >
> > # Or for more fine grained debug logging uncomment one of these
> > log4j.logger.org.apache.activemq=DEBUG
> > #log4j.logger.org.apache.camel=DEBUG
> >
> > # Console appender
> > log4j.appender.console=org.apache.log4j.ConsoleAppender
> > log4j.appender.console.layout=org.apache.log4j.PatternLayout
> > log4j.appender.console.layout.ConversionPattern=%5p | %m%n
> > log4j.appender.console.threshold=INFO
> >
> > # File appender
> > log4j.appender.logfile=org.apache.log4j.RollingFileAppender
> > log4j.appender.logfile.file=${activemq.base}/data/activemq.log
> > log4j.appender.logfile.maxFileSize=1024KB
> > log4j.appender.logfile.maxBackupIndex=5
> > log4j.appender.logfile.append=true
> > log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
> > log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c |
> %t%n
> >
> > #log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
> > #log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
> > #log4j.appender.kahadb.maxFileSize=1024KB
> > #log4j.appender.kahadb.maxBackupIndex=5
> > #log4j.appender.kahadb.append=true
> > #log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
> > #log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
> > %-30.30c{1} - %m%n
> > #log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE,
> > kahadb
> >
> > log4j.appender.stomp=org.apache.log4j.RollingFileAppender
> > log4j.appender.stomp.file=${activemq.base}/data/stomp.log
> > log4j.appender.stomp.maxFileSize=1024KB
> > log4j.appender.stomp.maxBackupIndex=5
> > log4j.appender.stomp.append=true
> > log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
> > log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
> > %-30.30c{1} - %m%n
> >
> > # enable this line and disable the above if you just want the frame IO.
> > #log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
> > log4j.additivity.org.apache.activemq.transport.stomp=false
> >
> >
> > TransportConnector:
> > <transportConnector name="stomp"
> uri="stomp://localhost:61612?trace=true"/>
> >
> > The stomp.log holds only:
> > 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
> > StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> > write check: 0
> > 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
> > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
> > StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> > write check: 0
> > 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
> > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
> > StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> > write check: 0
> > 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
> > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
> > StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> > write check: 0
> > 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
> > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> > 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
> > StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> > write check: 0
> > 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
> > ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> >
> > Where are the frames?
> >
> > I need to understand why a consumer is being starved of messages after a
> > while.
> >
> > Thanks,
> >
> > James
> >
>
>
>
> --
> *Christian Posta*
> http://www.christianposta.com/blog
> twitter: @christianposta
>
Re: AMQ 5.7.0: Stomp trace does not log frames
Posted by Christian Posta <ch...@gmail.com>.
So setting ?trace=true should add a transport filter to the transports that
is in this class:
org.apache.activemq.transport.TransportLogger
Can you try with the following settings
log4j.logger.org.apache.activemq.transport.TransportLogger=TRACE, stomp
to get the logging you want?
On Fri, Oct 26, 2012 at 8:34 AM, James Green <ja...@gmail.com>wrote:
> log4j.properties:
>
> log4j.rootLogger=INFO, console, logfile
> log4j.logger.org.apache.activemq.spring=WARN
> log4j.logger.org.apache.activemq.web.handler=WARN
> log4j.logger.org.springframework=WARN
> log4j.logger.org.apache.xbean=WARN
> log4j.logger.org.apache.camel=ERROR
> log4j.logger.org.apache.activemq.transport.stomp=TRACE, stomp
>
> # Or for more fine grained debug logging uncomment one of these
> log4j.logger.org.apache.activemq=DEBUG
> #log4j.logger.org.apache.camel=DEBUG
>
> # Console appender
> log4j.appender.console=org.apache.log4j.ConsoleAppender
> log4j.appender.console.layout=org.apache.log4j.PatternLayout
> log4j.appender.console.layout.ConversionPattern=%5p | %m%n
> log4j.appender.console.threshold=INFO
>
> # File appender
> log4j.appender.logfile=org.apache.log4j.RollingFileAppender
> log4j.appender.logfile.file=${activemq.base}/data/activemq.log
> log4j.appender.logfile.maxFileSize=1024KB
> log4j.appender.logfile.maxBackupIndex=5
> log4j.appender.logfile.append=true
> log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
> log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c | %t%n
>
> #log4j.appender.kahadb=org.apache.log4j.RollingFileAppender
> #log4j.appender.kahadb.file=${activemq.base}/data/kahadb.log
> #log4j.appender.kahadb.maxFileSize=1024KB
> #log4j.appender.kahadb.maxBackupIndex=5
> #log4j.appender.kahadb.append=true
> #log4j.appender.kahadb.layout=org.apache.log4j.PatternLayout
> #log4j.appender.kahadb.layout.ConversionPattern=%d [%-15.15t] %-5p
> %-30.30c{1} - %m%n
> #log4j.logger.org.apache.activemq.store.kahadb.MessageDatabase=TRACE,
> kahadb
>
> log4j.appender.stomp=org.apache.log4j.RollingFileAppender
> log4j.appender.stomp.file=${activemq.base}/data/stomp.log
> log4j.appender.stomp.maxFileSize=1024KB
> log4j.appender.stomp.maxBackupIndex=5
> log4j.appender.stomp.append=true
> log4j.appender.stomp.layout=org.apache.log4j.PatternLayout
> log4j.appender.stomp.layout.ConversionPattern=%d [%-15.15t] %-5p
> %-30.30c{1} - %m%n
>
> # enable this line and disable the above if you just want the frame IO.
> #log4j.logger.org.apache.activemq.transport.stomp.StompIO=TRACE, stomp
> log4j.additivity.org.apache.activemq.transport.stomp=false
>
>
> TransportConnector:
> <transportConnector name="stomp" uri="stomp://localhost:61612?trace=true"/>
>
> The stomp.log holds only:
> 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
> StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> write check: 0
> 2012-10-26 16:22:41,443 [0.1:57638@61612] DEBUG
> ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
> StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> write check: 0
> 2012-10-26 16:22:52,812 [0.1:57640@61612] DEBUG
> ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
> StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> write check: 0
> 2012-10-26 16:22:52,842 [0.1:57641@61612] DEBUG
> ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
> StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> write check: 0
> 2012-10-26 16:23:04,054 [0.1:57643@61612] DEBUG
> ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
> 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
> StompInactivityMonitor - Stomp Inactivity Monitor read check: 0,
> write check: 0
> 2012-10-26 16:23:15,386 [0.1:57645@61612] DEBUG
> ProtocolConverter - Stomp Connect heartbeat conf RW[0,0]
>
> Where are the frames?
>
> I need to understand why a consumer is being starved of messages after a
> while.
>
> Thanks,
>
> James
>
--
*Christian Posta*
http://www.christianposta.com/blog
twitter: @christianposta