You are viewing a plain text version of this content. The canonical link for it is here.
Posted to server-user@james.apache.org by Chris Lindley <ch...@zuuk.com> on 2006/12/11 13:12:39 UTC
Upgrade has caused CBL listing
Hi,
We've been using James 2.2 for a while now but recently upgraded to 2.3.0.
Shortly after the upgrade we were listed on the CBL (cbl.abuseat.org)
block list apparently because our mail server sends "localhost" as the
HELO when doing RemoteDelivery. We have tried pretty much everything to
specify the domain name - short of patching the class to hard code the
domain. We've followed all of CBL's suggestions and found
notes about the <bind> tag to RemoteDelivery, but mail is still being
sent out with the HELO of "localhost" (see mail headers) so CBL will not
de-list us.
Please help as we have a lot of people relying on this mail server!
Is this a common issue? Or is there something strange about our server?
I've attached the current configuration - please advise us on what we
need to do to get RemoteDelivery to send "mail.zuuk.com" rather than
"localhost" as the Helo.
Thanks,
Chris Lindley
ZUUK Ltd.
P.S.
Here's what the machine reports for it's network settings:
> [root@mail root]# ifconfig
> eth0 Link encap:Ethernet HWaddr 00:40:63:C7:A1:80
> inet addr:217.160.216.106 Bcast:217.160.216.106 Mask:255.255.255.255
> UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
> RX packets:962181 errors:0 dropped:0 overruns:0 frame:0
> TX packets:536519 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:186222421 (177.5 Mb) TX bytes:263581321 (251.3 Mb)
> Interrupt:23 Base address:0xe000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:363067 errors:0 dropped:0 overruns:0 frame:0
> TX packets:363067 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:175534872 (167.4 Mb) TX bytes:175534872 (167.4 Mb)
>
> [root@mail root]# uname -a
> Linux mail.zuuk.com 2.4.18-10custom #1 SMP Fri Feb 7 12:31:28 CET 2003 i686 unknown
Re: Upgrade has caused CBL listing
Posted by Vincenzo Gianferrari Pini <vi...@praxis.it>.
This is a problem I know. It may happen both in 2.2 and 2.3: during
startup James attempts to get the name of the local computer to use in
the helo string. For some strange reason the thread that does this work
may do it later than needed by the RemoteDelivery mailet, and in such
case the mailet will use 'localhost'. To avoid it there is a time wait
of some seconds (I think 60), but it may not be enough.
When it happened to me I made a patch to RemoteDelivery to accept a name
hardcoded in config.xml, but never applied such patch to the official
James code.
Please report it to jira and I will prepare such patch.
In the meantime, check the following: one reason for the problem to
occur is having lots of messages sitting in inboxes or repositories; in
this case the timing problem we are talking about may occur. Get rid of
such messages and the problem will disappear.
Hope it helps,
Vincenzo
Chris Lindley wrote:
> Hi,
>
> We've been using James 2.2 for a while now but recently upgraded to
> 2.3.0.
>
> Shortly after the upgrade we were listed on the CBL (cbl.abuseat.org)
> block list apparently because our mail server sends "localhost" as the
> HELO when doing RemoteDelivery. We have tried pretty much everything to
> specify the domain name - short of patching the class to hard code the
> domain. We've followed all of CBL's suggestions and found
> notes about the <bind> tag to RemoteDelivery, but mail is still being
> sent out with the HELO of "localhost" (see mail headers) so CBL will not
> de-list us.
>
> Please help as we have a lot of people relying on this mail server!
>
> Is this a common issue? Or is there something strange about our server?
>
> I've attached the current configuration - please advise us on what we
> need to do to get RemoteDelivery to send "mail.zuuk.com" rather than
> "localhost" as the Helo.
>
> Thanks,
>
> Chris Lindley
> ZUUK Ltd.
>
> P.S.
>
> Here's what the machine reports for it's network settings:
>
>> [root@mail root]# ifconfig
>> eth0 Link encap:Ethernet HWaddr 00:40:63:C7:A1:80
>> inet addr:217.160.216.106 Bcast:217.160.216.106
>> Mask:255.255.255.255
>> UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
>> RX packets:962181 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:536519 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:100
>> RX bytes:186222421 (177.5 Mb) TX bytes:263581321 (251.3 Mb)
>> Interrupt:23 Base address:0xe000
>>
>> lo Link encap:Local Loopback
>> inet addr:127.0.0.1 Mask:255.0.0.0
>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>> RX packets:363067 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:363067 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:0
>> RX bytes:175534872 (167.4 Mb) TX bytes:175534872 (167.4 Mb)
>>
>> [root@mail root]# uname -a
>> Linux mail.zuuk.com 2.4.18-10custom #1 SMP Fri Feb 7 12:31:28 CET
>> 2003 i686 unknown
>
>
> ------------------------------------------------------------------------
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: Upgrade has caused CBL listing
Posted by spamsucks <sp...@rhoderunner.com>.
Just some questions:
Did you use the Helo testing facility that they have and independently
verify results?
Did you change the config since this happened? Your config looks correct.
Are you sure it's the HELO related error. This can happen if you email
server is behind a router...
Phillip
----- Original Message -----
From: "Chris Lindley" <ch...@zuuk.com>
To: <se...@james.apache.org>
Sent: Monday, December 11, 2006 7:12 AM
Subject: Upgrade has caused CBL listing
> Hi,
>
> We've been using James 2.2 for a while now but recently upgraded to 2.3.0.
>
> Shortly after the upgrade we were listed on the CBL (cbl.abuseat.org)
> block list apparently because our mail server sends "localhost" as the
> HELO when doing RemoteDelivery. We have tried pretty much everything to
> specify the domain name - short of patching the class to hard code the
> domain. We've followed all of CBL's suggestions and found
> notes about the <bind> tag to RemoteDelivery, but mail is still being
> sent out with the HELO of "localhost" (see mail headers) so CBL will not
> de-list us.
>
> Please help as we have a lot of people relying on this mail server!
>
> Is this a common issue? Or is there something strange about our server?
>
> I've attached the current configuration - please advise us on what we
> need to do to get RemoteDelivery to send "mail.zuuk.com" rather than
> "localhost" as the Helo.
>
> Thanks,
>
> Chris Lindley
> ZUUK Ltd.
>
> P.S.
>
> Here's what the machine reports for it's network settings:
>
>> [root@mail root]# ifconfig
>> eth0 Link encap:Ethernet HWaddr 00:40:63:C7:A1:80
>> inet addr:217.160.216.106 Bcast:217.160.216.106
>> Mask:255.255.255.255
>> UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
>> RX packets:962181 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:536519 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:100
>> RX bytes:186222421 (177.5 Mb) TX bytes:263581321 (251.3 Mb)
>> Interrupt:23 Base address:0xe000
>>
>> lo Link encap:Local Loopback
>> inet addr:127.0.0.1 Mask:255.0.0.0
>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>> RX packets:363067 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:363067 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:0
>> RX bytes:175534872 (167.4 Mb) TX bytes:175534872 (167.4 Mb)
>>
>> [root@mail root]# uname -a
>> Linux mail.zuuk.com 2.4.18-10custom #1 SMP Fri Feb 7 12:31:28 CET 2003
>> i686 unknown
>
>
>
--------------------------------------------------------------------------------
> <?xml version="1.0"?>
> <!DOCTYPE config [
> <!ENTITY listserverConfig SYSTEM "../conf/james-listmanager.xml">
> <!ENTITY listserverStores SYSTEM "../conf/james-liststores.xml">
> <!ENTITY fetchmailConfig SYSTEM "../conf/james-fetchmail.xml">
> <!ENTITY smtphandlerchainConfig SYSTEM
> "../conf/james-smtphandlerchain.xml">
> ]>
>
> <!-- Configuration file for the ASF James server -->
>
> <!-- This file contains important settings that control the behaviour -->
> <!-- of all of the services and repositories. -->
>
> <!-- README! -->
>
> <!-- This configuration file is designed to run without alteration for
> simple tests. -->
> <!-- It assumes you have a DNS server on localhost and assigns a root
> password of root. -->
>
> <!-- In case the defaults do not suit you, the items you are most likely
> to need to change -->
> <!-- are preceded by a CHECKME! or CONFIRM? comment in the left
> margin. -->
>
> <!-- For production use you will probably need to make more extensive
> changes, see -->
> <!-- http://james.apache.org/server/2.3.0/ -->
>
> <!-- $Revision: 450377 $ Committed on $Date: 2006-09-27 04:18:09 -0400
> (Wed, 27 Sep 2006) $ by: $Author: bago $ -->
>
> <config>
> <James>
>
> <!-- CHECKME! -->
> <!-- This is the postmaster email address for this mail server. -->
> <!-- Set this to the appropriate email address for error reports -->
> <!-- If this is set to a non-local email address, the mail server -->
> <!-- will still function, but will generate a warning on startup. -->
> <postmaster>devnull@zuuk.com</postmaster>
>
> <!-- servernames identifies the DNS namespace served by this instance
> of James. -->
> <!-- These servernames are used for both matcher/mailet processing
> and SMTP auth -->
> <!-- to determine when a mail is intended for local delivery. -->
> <!-- -->
> <!-- If autodetect is TRUE, James wil attempt to discover its own
> host name AND -->
> <!-- use any explicitly specified servernames. -->
> <!-- If autodetect is FALSE, James will use only the specified
> servernames. -->
> <!-- -->
> <!-- If autodetectIP is not FALSE, James will also allow add the IP
> address for each servername. -->
> <!-- The automatic IP detection is to support RFC 2821, Sec 4.1.3,
> address literals. -->
> <!-- -->
> <!-- To override autodetected server names simply add explicit
> servername elements. -->
> <!-- In most cases this will be necessary. -->
> <!-- By default, the servername 'localhost' is specified. This can be
> removed, if required. -->
> <!-- -->
> <!-- Warning: If you are using fetchmail it is important to include
> the -->
> <!-- fetched domains in the server name list to prevent
> g. -->
> <servernames autodetect="false" autodetectIP="false">
> <!-- CONFIRM? -->
> <servername>zuuk.com</servername>
> <servername>localhost</servername>
> <servername>zuuk.co.uk</servername>
> <servername>bubblebank.com</servername>
> <servername>cwaudit.org.uk</servername>
> <servername>engreen.co.uk</servername>
> <servername>businesscapability.co.uk</servername>
> <servername>naturopathic-health.co.uk</servername>
> </servernames>
>
> <!-- Set whether user names are case sensitive or case
> insensitive -->
> <!-- Set whether to enable local aliases -->
> <!-- Set whether to enable forwarding -->
> <usernames ignoreCase="true" enableAliases="true"
> enableForwarding="true"/>
>
> <!-- The inbox repository is the location for users inboxes -->
> <!-- Default setting: file based repository - enter path ( use
> "file:///" for absolute) -->
> <inboxRepository>
> <repository destinationURL="file://var/mail/inboxes/"
> type="MAIL"/>
> </inboxRepository>
>
> <!-- Alternative inbox repository definition for DB use. -->
> <!-- The format for the destinationURL is
> "db://<data-source>/<table>" -->
> <!-- <data-source> is the datasource name set up in the
> database-connections block, below -->
> <!-- <table> is the name of the table to store user inboxes in -->
> <!-- The user name is used as <repositoryName> for this repository
> config. -->
> <!--
> <inboxRepository>
> <repository destinationURL="db://maildb/inbox/" type="MAIL"/>
> </inboxRepository>
> -->
>
> <!-- Alternative inbox repository definition for DB use. -->
> <!-- Stores message body in file system, rest in database -->
> <!--
> <inboxRepository>
> <repository destinationURL="dbfile://maildb/inbox/" type="MAIL"/>
> </inboxRepository>
> -->
>
> <!-- Alternative inbox repository definition for mbox use. -->
> <!-- This method uses UNIX standard mbox files and is meant for
> people using mbox files -->
> <!-- with systems such as mail list archive displayers -->
> <!-- Note that dot-locking is not currently supported -->
> <!-- so network (write) accesses may cause mbox corruption -->
> <!-- the sample mbox URL is an absolute URL; mbox:///var/mail will
> put the users mbox files in /var/mail/-->
> <!--
> <inboxRepository>
> <repository destinationURL="mbox:///var/mail/" type="MAIL"/>
> </inboxRepository>
> -->
> </James>
>
> <!-- This is an example configuration for FetchMail, a JavaMail based
> gateway -->
> <!-- service that pulls messages from other sources, and inserts them
> into the -->
> <!-- spool. They are then processed normally, although FetchMail
> generally -->
> <!-- has to fabricate some of the envelope information. FetchMail
> should be -->
> <!-- considered a mail gateway, rather than a relay, in RFC
> -->
> <!-- Fetchmail is a functionally richer replacement for
> -->
> <!-- CHECKME: FetchMail is disabled by default, and must be configured
> to use. -->
> <!-- Edit the file referred to by fetchmailConfig to enable and
> configure. -->
> &fetchmailConfig;
>
> <!-- Set the Java packages from which to load mailets and matchers -->
> <mailetpackages>
> <mailetpackage>org.apache.james.transport.mailets</mailetpackage>
>
> <mailetpackage>org.apache.james.transport.mailets.smime</mailetpackage>
> <mailetpackage>com.claudeduguay.mailets</mailetpackage>
> </mailetpackages>
> <matcherpackages>
> <matcherpackage>org.apache.james.transport.matchers</matcherpackage>
>
> <matcherpackage>org.apache.james.transport.matchers.smime</matcherpackage>
> <matcherpackage>com.claudeduguay.mailets</matcherpackage>
> </matcherpackages>
>
> <!-- The James Spool Manager block -->
> <!-- -->
> <!-- This block is responsible for processing messages on the spool. -->
> <spoolmanager>
> <!-- Number of spool threads -->
> <threads> 10 </threads>
>
> <!-- The root processor is a required processor - James routes all
> mail on the spool -->
> <!-- through this processor first. -->
> <!-- -->
> <!-- This configuration is a sample configuration for the root
> processor. -->
> <processor name="root">
>
> <!-- This mailet redirects mail for the user 'postmaster' at any
> local domain to -->
> <!-- the postmaster address specified for the server. The
> postmaster address -->
> <!-- is required by rfc822. Do not remove this mailet unless you
> are meeting -->
> <!-- this requirement through other means (e.g. a
> XML/JDBCVirtualUserTable mailet) -->
> <mailet match="All" class="PostmasterAlias"/>
>
> <!-- always allow mail from linuxone -->
> <mailet match="SenderIs=root@linuxone.localdomain"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <mailet match="SenderIs=nagios@linuxone.localdomain"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
>
> <mailet match="RecipientIs=deboranmo@bubblebank.com"
> class="Null"/>
>
> <!-- Checks that the email Sender is associated with a valid
> domain. -->
> <!-- Useful for detecting and eliminating spam. -->
> <!-- For this block to function, the spam processor must be
> configured. -->
> <mailet
> match="SenderInFakeDomain=64.55.105.9,64.94.110.11,194.205.62.122,194.205.62.62,195.7.77.20,206.253.214.102,212.181.91.6,219.88.106.80,194.205.62.42,216.35.187.246,203.119.4.6"
> class="ToProcessor">
> <processor> spam </processor>
> </mailet>
>
> <!-- Important check to avoid looping -->
> <mailet match="RelayLimit=30" class="Null"/>
>
> <!-- Check for viruses -->
> <!-- -->
> <!-- Does an antivirus scan check using a ClamAV daemon
> (CLAMD). -->
> <!-- -->
> <!-- Interacts directly with the daemon using the "stream"
> method, -->
> <!-- which should have the lowest possible overhead. -->
> <!-- The CLAMD daemon will typically reside on localhost, but
> could reside on a -->
> <!-- different host. -->
> <!-- It may also consist on a set of multiple daemons, each
> residing on a different -->
> <!-- server and on different IP number. -->
> <!-- In such case a DNS host name with multiple IP addresses
> (round-robin load sharing) -->
> <!-- is supported by the mailet (but on the same port number). -->
> <!-- -->
> <!-- Handles the following init parameters: -->
> <!-- <debug> -->
> <!-- <host>: the host name of the server where CLAMD runs. It can
> either be -->
> <!-- a machine name, such as -->
> <!-- "java.sun.com", or a textual representation of its -->
> <!-- IP address. If a literal IP address is supplied, only
> the -->
> <!-- validity of the address format is checked. -->
> <!-- If the machine name resolves to multiple IP addresses,
> round-robin load sharing will -->
> <!-- be used. -->
> <!-- The default is "localhost". -->
> <!-- <port>: the port on which CLAMD listens. The default is
> "3310". -->
> <!-- <maxPings>: the maximum number of connection retries during
> startup. -->
> <!-- If the value is "0" no startup test will be done. -->
> <!-- The default is "6". -->
> <!-- <pingIntervalMilli>: the interval (in milliseconds) -->
> <!-- between each connection retry during startup. -->
> <!-- The default is "30000" (30 seconds). -->
> <!-- <streamBufferSize>: the BufferedOutputStream buffer size to
> use -->
> <!-- writing to the stream connection. The default is
> "8192". -->
> <mailet match="All" class="ClamAVScan" onMailetException="ignore">
> <debug> true </debug>
> </mailet>
>
> <!-- If infected go to virus processor -->
> <mailet
> match="HasMailAttributeWithValue=org.apache.james.infected, true"
> class="ToProcessor">
> <processor> virus </processor>
> </mailet>
>
> <!-- Check attachment extensions for possible viruses -->
> <!-- The "-z" option requests the check to be non-recursively
> applied -->
> <!-- to the contents of any attached '*.zip' file. -->
> <mailet match="AttachmentFileNameIs=-d -z *.exe *.com *.bat *.cmd
> *.pif *.scr *.vbs *.avi *.mp3 *.mpeg *.shs" class="Bounce"
> onMatchException="error">
> <inline>heads</inline>
> <attachment>none</attachment>
> <passThrough>false</passThrough>
> <prefix>[REJECTED]</prefix>
> <notice>
> The Security Policy of ZUUK does not allow to forward messages containing
> attachments having any of the extensions .exe, .com, .bat, .cmd, .pif,
> .scr, .vbs, .avi, .mp3, .mpeg, .shs, therefore your message has been
> rejected.
>
> Please don't reply to this e-mail as it has been automatically sent by the
> antivirus system.
>
> Regards, Postmaster ZUUK
> .....................................
> </notice>
> </mailet>
>
> <!-- Whitelist Management -->
> <!-- Manages for each local user a "white list" of remote
> addresses whose messages -->
> <!-- should never be blocked as spam. -->
> <!-- -->
> <!-- If <automaticInsert> is true, it will check, for a local
> sender, if a remote recipient -->
> <!-- is already in the list: if not, it will be automatically
> inserted. -->
> <!-- This is under the interpretation that if a local sender X
> sends a message to a -->
> <!-- remote recipient Y, then later on if a message is sent by Y
> to X it should be -->
> <!-- considered always valid and never blocked; hence Y should be
> in the white list -->
> <!-- of X. -->
> <!-- -->
> <!-- Another mode of operations is when a local sender sends a
> message to <whitelistManagerAddress> -->
> <!-- with one of three specific values in the subject, to -->
> <!-- (i) send back a message displaying a list of the addresses in
> his own list (<displayFlag>); -->
> <!-- (ii) insert some new addresses in his own list
> (<insertFlag>); -->
> <!-- (iii) remove some addresses from his own list
> (<removeFlag>). -->
> <!-- In all of the three above cases the message will be ghosted
> and the postmaster will reply -->
> <!-- to the sender. -->
> <!-- -->
> <!-- The sender name is always converted to its primary name
> (handling aliases). -->
> <mailet match="SMTPAuthSuccessful" class="WhiteListManager"
> onMailetException="ignore">
> <repositoryPath>db://maildb</repositoryPath>
> <automaticInsert>true</automaticInsert>
>
> <whitelistManagerAddress>whitelist.manager@zuuk.com</whitelistManagerAddress>
> <displayFlag>display</displayFlag>
> <insertFlag>insert</insertFlag>
> <removeFlag>remove</removeFlag>
> </mailet>
>
> <!-- "not spam" bayesian analysis feeder. -->
> <mailet match="RecipientIs=not.spam@zuuk.com"
> class="BayesianAnalysisFeeder">
> <repositoryPath> db://maildb </repositoryPath>
> <feedType>ham</feedType>
> <maxSize>200000</maxSize>
> </mailet>
>
> <!-- "spam" bayesian analysis feeder. -->
> <mailet match="RecipientIs=spam@zuuk.com"
> class="BayesianAnalysisFeeder">
> <repositoryPath> db://maildb </repositoryPath>
> <feedType>spam</feedType>
> <maxSize>200000</maxSize>
> </mailet>
>
> <!-- sample SMIME mailets configuration -->
> <!-- In order to use SMIME capabilities you need to install the
> bouncycastle JCE -->
> <!-- provider in your environment (james/lib) -->
> <!-- e.g: bcprov-jdk14-129.jar from
> http://www.bouncycastle.org/latest_releases.html -->
> <!--
> <mailet match="IsSMIMEEncrypted" class="SMIMEDecrypt">
> <keyStoreType>pkcs12</keyStoreType>
> <keyStoreFileName>c:/path.pfx</keyStoreFileName>
> <keyStorePassword>myKeyStorePass</keyStorePassword>
> <keyAlias>myKeyAlias</keyAlias>
> <keyAliasPassword>myKeyPass</keyAliasPassword>
> </mailet>
>
> <mailet match="IsSMIMESigned" class="SMIMECheckSignature">
> <keyStoreType>pkcs12</keyStoreType>
> <keyStoreFileName>c:/path.pfx</keyStoreFileName>
> <keyStorePassword>myKeyStorePass</keyStorePassword>
> <strip>false</strip>
> <onlyTrusted>true</onlyTrusted>
> </mailet>
> -->
>
> <!--
> <mailet match="All" class="XMLVirtualUserTable">
> <!- 1:1 mapping ->
> <mapping>morgoth@middle-earth=sauron@mordor</mapping>
> <!- 1:n mapping ->
>
> <mapping>istari@middle-earth=saruman@isengard;radigast;gandalf</mapping>
> <!- DSN mapping ->
> <mapping>boromir@osgilliath=error:550 Requested action not
> taken: no such user here</mapping>
> <!- regex based mapping ->
>
> <mapping>*@osgilliath=regex:(.*)@osgilliath:${1}@minas-tirith</mapping>
> <!- both standard and regex mapping ->
>
> <mapping>ring@*=onering@mordor;regex:ring@(.*):ring@${1}</mapping>
> <!- conditional regex mapping example ->
>
> <mapping>*@listserver=regex:(.*)-on@listserver:${1}-subscribe@listserver;
>
> regex:(.*)-off@listserver:${1}-unsubscribe@listserver
> </mapping>
> </mailet>
> -->
> <mailet match="All" class="XMLVirtualUserTable">
>
> <mapping>info@engreen.co.uk=stephen.mcfarlane@engreen.co.uk</mapping>
>
> <mapping>andy.needham@cwaudit.org.uk=andrew.needham@cwaudit.org.uk</mapping>
>
> <mapping>lisa.measures@cwaudit.org.uk=lisa.hines@cwaudit.org.uk</mapping>
>
> <mapping>liannecoates@businesscapability.co.uk=lianne.coates@businesscapability.co.uk</mapping>
>
> <mapping>*@zuuk.co.uk=regex:(.*)@zuuk.co.uk:${1}@zuuk.com</mapping>
> </mailet>
>
> <!-- Add in the vacation auto-responder -->
> <mailet
> match="MatchSingleRecipient=unavailable@cwaudit.org.uk"
> class="UnavailableMessageSave">
> <folder>/opt/james/apps/james/var/mail/unavailable</folder>
> <subject>You have been marked as UNAVAILABLE</subject>
> <content>Send a message to available@cwaudit.org.uk to
> reset.</content>
> </mailet>
> <mailet
> match="MatchSingleRecipient=available@cwaudit.org.uk"
> class="UnavailableMessageDrop">
> <folder>/opt/james/apps/james/var/mail/unavailable</folder>
> <subject>You have been marked as AVAILABLE</subject>
> <content>Send a message to unavailable@cwaudit.org.uk to send
> the
> message to users when you are unavailable.</content>
> </mailet>
> <mailet
>
> match="MatchUnavailableUser=/opt/james/apps/james/var/mail/unavailable"
> class="UnavailableMessageSend">
> <folder>/opt/james/apps/james/var/mail/unavailable</folder>
> <skip>available@cwaudit.org.uk;unavailable@cwaudit.org.uk</skip>
> </mailet>
>
> <!-- Anti-spam processing -->
> <!-- The following two entries avoid double anti-spam analysis -->
> <!-- for forwarded messages. -->
> <!-- Has spam checking already been done? -->
> <mailet match="HasMailAttribute=spamChecked" class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <!-- Spam checking will not be done twice -->
> <mailet match="All" class="SetMailAttribute">
> <spamChecked>true</spamChecked>
> </mailet>
>
> <!-- White List:
> If you use block lists, you will probably want to check
> for known permitted senders. This is particularly true
> if you use more aggressive block lists, such as SPEWS,
> that are prone to block entire subnets without regard
> for non-spamming senders.
> -->
>
> <!-- Messages from authenticated senders never are spam -->
> <mailet match="SMTPAuthSuccessful" class="ToProcessor">
> <processor> transport </processor>
> </mailet>
>
> <!-- Messages signed by trusted users never are spam -->
> <!-- Uncommenting the following entry, messages with valid
> signatures will never be considered spam. -->
> <!-- This can be a valid policy *if* SMIMECheckSignature was
> invoked -->
> <!-- with <onlyTrusted>true</onlyTrusted> set -->
> <!--
> <mailet
> match="HasMailAttribute=org.apache.james.SMIMECheckSignature"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> -->
>
> <!-- specific known senders -->
> <!--
> <mailet match="SenderIs=goodboy@goodhost"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> -->
> <!-- specific known senders -->
> <mailet match="SenderIs=chris.lindley@zuuk.com"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <mailet match="SenderIs=jude.hankamer@zuuk.com"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <mailet match="SenderIs=josef.pogadl@zuuk.com"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <mailet match="SenderIs=mailer@bubblebank.com"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <mailet match="SenderIsRegex=(.*)@cwaudit\.(.*)"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <mailet match="SenderIsRegex=(.*)@(.*)\.nhs\.uk"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <mailet match="SenderIsRegex=(.*)@uk\.pwc\.com"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> <mailet match="SenderIs=martin.purcell@refugepress.fsnet.co.uk"
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
>
> <!-- People on this list agree to pay a penalty if they send
> spam -->
> <mailet match="InSpammerBlacklist=query.bondedsender.org."
> class="ToProcessor">
> <processor> transport </processor>
> </mailet>
>
> <!-- E-mail legally required not to be spam (see:
> http://www.habeas.com) -->
> <!--
> <mailet match="HasHabeasWarrantMark" class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> -->
>
> <!-- If the sender is in a recipient's whitelist, it is a valid
> sender, -->
> <!-- and as such the message should not be considered spam for
> such recipient. -->
> <mailet match="IsInWhiteList=db://maildb" class="ToProcessor"
> onMatchException="noMatch">
> <processor> transport </processor>
> </mailet>
>
> <!-- End of White List -->
>
> <!-- Check for delivery from a known spam server -->
> <!-- This set of matchers/mailets redirect all emails from
> known -->
> <!-- black holes, open relays, and spam servers to the spam
> processor -->
> <!-- For this set to function properly, the spam processor must be
> configured. -->
> <mailet match="InSpammerBlacklist=dnsbl.njabl.org."
> class="ToProcessor">
> <processor> spam </processor>
> <notice>550 Requested action not taken: rejected - see
> http://njabl.org/ </notice>
> </mailet>
>
> <mailet match="InSpammerBlacklist=relays.ordb.org."
> class="ToProcessor">
> <processor> spam </processor>
> <notice>550 Requested action not taken: rejected - see
> http://www.ordb.org/ </notice>
> </mailet>
>
> <!-- Sample matching to kill a message (send to Null) -->
> <!--
> <mailet match="RecipientIs=badboy@badhost" class="Null"/>
> -->
> <!-- spoofed e-mail senders that we never use! -->
> <mailet match="SenderIs=oedozuuk@zuuk.com" class="Null"/>
> <mailet match="SenderIs=webmaster@zuuk.com" class="Null"/>
> <mailet match="SenderIs=register@zuuk.com" class="Null"/>
> <mailet match="SenderIs=support@zuuk.com" class="Null"/>
> <mailet match="SenderIs=mail@zuuk.com" class="Null"/>
> <mailet match="SenderIs=hostmaster@zuuk.com" class="Null"/>
> <mailet match="SenderIs=administrator@zuuk.com" class="Null"/>
> <mailet match="SenderIs=info@zuuk.com" class="Null"/>
> <mailet match="SenderIs=service@zuuk.com" class="Null"/>
> <!-- unused mail addresses that get lots of spam -->
> <mailet match="RecipientIs=webmaster@bubblebank.com"
> class="Null"/>
> <mailet match="RecipientIs=webmaster@cwaudit.org.uk"
> class="Null"/>
> <mailet match="RecipientIs=info@cwaudit.org" class="Null"/>
> <mailet match="RecipientIs=info@cwaudit.org.uk" class="Null"/>
> <mailet match="RecipientIs=sales@bubblebank.com" class="Null"/>
> <mailet match="RecipientIs=sales@cwaudit.co.uk" class="Null"/>
> <mailet match="RecipientIs=sales@cwaudit.org.uk" class="Null"/>
> <mailet match="RecipientIs=sales@cwaudit.org" class="Null"/>
> <mailet match="RecipientIs=eedham@cwaudit.org.uk" class="Null"/>
> <mailet match="RecipientIs=stephen.mangan@cwaudit.org.uk"
> class="Null"/>
> <mailet match="RecipientIs=steve.mangan@cwaudit.org.uk"
> class="Null"/>
> <mailet match="RecipientIs=david.mcbride@cwaudit.org.uk"
> class="Null"/>
> <mailet match="RecipientIs=oedozuuk@zuuk.com" class="Null"/>
> <mailet match="RecipientIs=zuuk@zuuk.com" class="Null"/>
> <mailet match="RecipientIs=deboranmo@bubblebank.com"
> class="Null"/>
> <mailet match="RecipientIs=oedozuuk@zuuk.com" class="Null"/>
> <mailet match="RecipientIs=greendavid.green@engreen.co.uk"
> class="Null"/>
> <mailet match="RecipientIs=martianorbit@zuuk.com" class="Null"/>
> <mailet match="RecipientIs=tyrrellwill.tyrrell@cwaudit.org.uk"
> class="Null"/>
> <mailet match="RecipientIs=paul.dudfieldd@cwaudit.org.uk"
> class="Null"/>
> <mailet match="RecipientIs=paul.dudfielddd@cwaudit.org.uk"
> class="Null"/>
>
> <!-- Anti spam bayesian analysis -->
> <mailet match="All" class="BayesianAnalysis"
> onMailetException="ignore">
> <repositoryPath>db://maildb</repositoryPath>
> <maxSize>200000</maxSize>
> <headerName>X-MessageIsSpamProbability</headerName>
> <ignoreLocalSender>true</ignoreLocalSender>
> </mailet>
>
> <mailet
> match="CompareNumericHeaderValue=X-MessageIsSpamProbability > 0.85"
> class="SetMailAttribute" onMatchException="noMatch">
> <isSpam>true</isSpam>
> </mailet>
>
> <mailet
> match="CompareNumericHeaderValue=X-MessageIsSpamProbability > 0.85"
> class="SetMimeHeader" onMatchException="noMatch">
> <name>X-MessageIsSpam</name>
> <value>true</value>
> </mailet>
>
> <!--
> <mailet
> match="CompareNumericHeaderValue=X-MessageIsSpamProbability > 0.99"
> class="ToProcessor" onMatchException="noMatch">
> <processor> spam </processor>
> <notice>Spam not accepted</notice>
> </mailet>
> -->
>
> <!-- test spamassassin maillet -->
> <!-- do we need 2 spam checkers - the inbuilt one seems OK
> <mailet match="SenderHostIsNotLocal" class="SpamAssassin">
> <subjectPrefix>***SPAM***</subjectPrefix>
> </mailet>
> -->
>
> <!-- forwarding of CWAS mail -->
> <mailet match="RecipientIs=suzanne.brooks@cwaudit.org.uk"
> class="Forward">
> <forwardto>Suzanne.Brooks@uhcw.nhs.uk</forwardto>
> </mailet>
>
> <!-- Send remaining mails to the transport processor for either
> local or remote delivery -->
> <mailet match="All" class="ToProcessor">
> <processor> transport </processor>
> </mailet>
> </processor>
>
> <!-- The error processor is required. James may internally set
> emails to the -->
> <!-- error state. The error processor is generally invoked when
> there is an -->
> <!-- unexpected error either in the mailet chain or internal to
> James. -->
> <!-- -->
> <!-- By default configuration all email that generates an error in
> placed in -->
> <!-- an error repository. -->
> <processor name="error">
> <!-- If you want to notify the sender their message generated an
> error, uncomment this -->
> <!--
> <mailet match="All" class="Bounce"/>
> -->
> <!-- If you want to notify the postmaster that a message generated
> an error, uncomment this -->
> <!--
> <mailet match="All" class="NotifyPostmaster"/>
> -->
>
> <!-- Logs any messages to the repository specified -->
> <mailet match="All" class="ToRepository">
> <repositoryPath> file://var/mail/error/</repositoryPath>
> <!-- An alternative database repository example follows. -->
> <!--
> <repositoryPath> db://maildb/deadletter/error </repositoryPath>
> -->
> </mailet>
> </processor>
>
> <!-- Processor CONFIGURATION SAMPLE: transport is a sample custom
> processor for local or -->
> <!-- remote delivery -->
> <processor name="transport">
>
> <!-- This is an example configuration including configuration for a
> list server. -->
> <!-- CHECKME: before uncommenting this, edit the configuration
> file's contents -->
> <!--
> &listserverConfig;
> -->
>
> <mailet match="SMTPAuthSuccessful" class="SetMimeHeader">
> <name>X-UserIsAuth</name>
> <value>true</value>
> </mailet>
>
> <mailet
> match="HasMailAttribute=org.apache.james.SMIMECheckSignature"
> class="SetMimeHeader">
> <name>X-WasSigned</name>
> <value>true</value>
> </mailet>
>
> <!-- Add a server-side signature -->
> <!-- In order to use SMIME capabilities you need to install the
> bouncycastle JCE -->
> <!-- provider in your environment (james/lib) -->
> <!-- e.g: bcprov-jdk14-129.jar from
> http://www.bouncycastle.org/latest_releases.html -->
> <!--
> <mailet match="All" class="SMIMESign" onMailetException="ignore">
> <keyStoreType>jks</keyStoreType>
> <keyStoreFileName>path.keystore</keyStoreFileName>
> <keyStorePassword>myKeyStorePass</keyStorePassword>
> <keyAlias>myKeyAlias</keyAlias>
> <keyAliasPassword>myKeyPass</keyAliasPassword>
> <signerName>XXX Trusted Server</signerName>
> <rebuildFrom>true</rebuildFrom>
> <postmasterSigns>true</postmasterSigns>
> <debug>true</debug>
> </mailet>
> -->
>
> <!-- Check if over quota -->
> <!--
> <mailet match="RecipientIsOverFixedQuota=20M" class="Resend">
> <sender>postmaster</sender>
> <replyTo>postmaster</replyTo>
> <reversePath>null</reversePath>
> <inline>none</inline>
> <attachment>message</attachment>
> <prefix>[OVER QUOTA WARNING]</prefix>
> <message>
> When receiving the attached message, your mailbox is larger than 20 MB,
> which is the maximum allowed quota. The mailbox will not be blocked, but
> we ask you to empty it ASAP.
>
> It is likely that you have set, in your mail client account, the option
> "leave a copy of messages on server". For any help ask your
> administrators.
>
> Regards, Postmaster XXX.YYY
> .....................................
> </message>
> </mailet>
> -->
>
> <!-- Is the recipient is for a local account, deliver it
> locally -->
> <mailet match="RecipientIsLocal" class="LocalDelivery"/>
>
> <!-- If the host is handled by this server and it did not get -->
> <!-- locally delivered, this is an invalid recipient -->
> <!--
> <mailet match="HostIsLocal" class="ToProcessor">
> <processor> local-address-error </processor>
> <notice>550 - Requested action not taken: no such user
> here</notice>
> </mailet>
> -->
> <mailet match="HostIsLocal" class="Forward">
> <forwardTo>devnull@zuuk.com</forwardTo>
> </mailet>
>
> <!-- CHECKME! -->
> <!-- This is an anti-relay matcher/mailet combination -->
> <!-- -->
> <!-- Emails sent from servers not in the network list are -->
> <!-- rejected as spam. This is one method of preventing your -->
> <!-- server from being used as an open relay. Make sure you
> understand -->
> <!-- how to prevent your server from becoming an open relay
> before -->
> <!-- changing this configuration. See also <authorizedAddresses>
> in SMTP Server -->
> <!-- -->
> <!-- This matcher/mailet combination must come after local
> delivery has -->
> <!-- been performed. Otherwise local users will not be able to
> receive -->
> <!-- email from senders not in this remote address list. -->
> <!-- -->
> <!-- If you are using this matcher/mailet you will probably want
> to -->
> <!-- update the configuration to include your own
> network/addresses. The -->
> <!-- matcher can be configured with a comma separated list of IP
> addresses -->
> <!-- wildcarded IP subnets, and wildcarded hostname subnets. -->
> <!-- e.g. "RemoteAddrNotInNetwork=127.0.0.1, abc.de.*,
> 192.168.0.*" -->
> <!-- -->
> <!-- If you are using SMTP authentication then you can (and
> generally -->
> <!-- should) disable this matcher/mailet pair. -->
> <!--CBL
> <mailet match="RemoteAddrNotInNetwork=127.0.0.1"
> class="ToProcessor">
> <processor> relay-denied </processor>
> <notice>550 - Requested action not taken: relaying
> denied</notice>
> </mailet>
> -->
>
> <!-- Attempt remote delivery using the specified repository for
> the spool, -->
> <!-- using delay time to retry delivery and the maximum number of
> retries -->
> <mailet match="All" class="RemoteDelivery">
> <!--<bind>217.160.216.106</bind>-->
> <bind>mail.zuuk.com</bind>
> <outgoing> file://var/mail/outgoing/ </outgoing>
> <!-- alternative database repository example below -->
> <!--
> <outgoing> db://maildb/spool/outgoing </outgoing>
> -->
>
> <!-- Delivery Schedule based upon RFC 2821, 4.5.4.1 -->
> <!-- 5 day retry period, with 4 attempts in the first
> hour, two more within the first 6 hours, and then
> every 6 hours for the rest of the period. -->
> <delayTime> 5 minutes </delayTime>
> <delayTime> 10 minutes </delayTime>
> <delayTime> 45 minutes </delayTime>
> <delayTime> 2 hours </delayTime>
> <delayTime> 3 hours </delayTime>
> <delayTime> 6 hours </delayTime>
> <maxRetries> 25 </maxRetries>
>
> <!-- The number of threads that should be trying to deliver
> outgoing messages -->
> <deliveryThreads> 1 </deliveryThreads>
>
> <!-- If false the message will not be sent to given server if
> any recipients fail -->
> <sendpartial>false</sendpartial>
>
> <!-- By default we send bounces to the "bounce" processor -->
> <!-- By removing this configuration James will fallback to
> hardcoded bounce -->
> <!-- notifications -->
> <bounceProcessor>bounces</bounceProcessor>
>
> <!-- A single mail server to deliver all outgoing messages. -->
> <!-- This is useful if this server is a backup or failover
> machine, -->
> <!-- or if you want all messages to be routed through a
> particular mail server, -->
> <!-- regardless of the email addresses specified in the
> message -->
> <!-- -->
> <!-- The gateway element specifies the gateway SMTP server
> name. -->
> <!-- If your gateway mail server is listening on a port other
> than 25, -->
> <!-- you can set James to connect to it on that port using the
> gatewayPort -->
> <!-- element. -->
> <!-- Although normally multiple addresses are implemented
> through proper -->
> <!-- DNS configuration, the RemoteDelivery mail does allow
> specifying -->
> <!-- multiple gateway elements, each of which may also have a
> port -->
> <!-- e.g., mygateway:2525 -->
> <!-- the gatewayPort element is used as a default -->
> <!--
> <gateway> otherserver.mydomain.com </gateway>
> <gatewayPort>25</gatewayPort>
> -->
> </mailet>
>
> </processor>
>
> <!-- Processor CONFIGURATION SAMPLE: spam is a sample custom
> processor for handling -->
> <!-- spam. -->
> <!-- You can either log these, bounce these, or just ignore them. -->
> <processor name="spam">
> <!-- To destroy all messages, uncomment this matcher/mailet
> configuration -->
> <!--
> <mailet match="All" class="Null"/>
> -->
>
> <!-- To notify the sender their message was marked as spam,
> uncomment this matcher/mailet configuration -->
> <!--
> <mailet match="All" class="Bounce"/>
> -->
>
> <!-- To notify the postmaster that a message was marked as spam,
> uncomment this matcher/mailet configuration -->
> <!--
> <mailet match="All" class="NotifyPostmaster"/>
> -->
>
> <!-- To log the message to a repository, this matcher/mailet
> configuration should be uncommented. -->
> <!-- This is the default configuration. -->
> <mailet match="All" class="ToRepository">
> <repositoryPath>file://var/mail/spam/</repositoryPath>
>
> <!-- Changing the repositoryPath, as in this commented out
> example, will -->
> <!-- cause the mails to be stored in a database
> epository. -->
> <!-- Please note that only one repositoryPath element can be
> present for the mailet -->
> <!-- configuration. -->
> <!--
> <repositoryPath> db://maildb/deadletter/spam </repositoryPath>
> -->
> </mailet>
> </processor>
>
> <!-- messages containing viruses. -->
> <processor name="virus">
>
> <!-- To avoid a loop while bouncing -->
> <mailet match="All" class="SetMailAttribute">
> <org.apache.james.infected>true,
> bouncing</org.apache.james.infected>
> </mailet>
>
> <!-- If the sender is authenticated, notify the infection -->
> <mailet match="SMTPAuthSuccessful" class="Bounce">
> <inline>heads</inline>
> <attachment>none</attachment>
> <notice> Warning: We were unable to deliver the message below
> because it was found infected by virus(es). </notice>
> </mailet>
>
> <!-- In any other situation ghost it, -->
> <!-- as viruses almost always spoof the sender's address -->
> <mailet match="All" class="Null" />
> </processor>
>
> <!-- This processor handles messages that are for local domains,
> where the user is unknown -->
> <processor name="local-address-error">
> <!-- To avoid bouncing/archiving spam, uncomment this
> matcher/mailet configuration -->
> <!--
> <mailet match="HasMailAttribute=isSpam" class="Null"
> onMatchException="noMatch"/>
> -->
>
> <!-- To notify the sender the address was invalid, uncomment this
> matcher/mailet configuration -->
> <!-- The original message is not attached to keep the bounce
> processor from deliverying spam -->
> <mailet match="All" class="Bounce">
> <attachment>none</attachment>
> </mailet>
>
> <!-- To notify the postmaster that a message had an invalid
> address, uncomment this matcher/mailet configuration -->
> <!--
> <mailet match="All" class="NotifyPostmaster"/>
> -->
>
> <mailet match="All" class="ToRepository">
> <repositoryPath>
> file://var/mail/address-error/</repositoryPath>
> <!-- An alternative database repository example follows. -->
> <!--
> <repositoryPath> db://maildb/deadletter/address-error
> </repositoryPath>
> -->
> </mailet>
> </processor>
>
> <!-- This processor handles messages that are for foreign domains,
> where relaying is denied -->
> <!-- As of James v2.2, this processor can be deprecated by using the
> <authorizedAddresses> tag
> in the SMTP Server, and rejecting the message in the protocol
> transaction. -->
> <processor name="relay-denied">
> <!-- To notify the sender the address was invalid, uncomment this
> matcher/mailet configuration -->
> <!-- The original message is not attached to keep the bounce
> processor from deliverying spam -->
> <!--
> <mailet match="All" class="Bounce">
> <attachment>none</attachment>
> </mailet>
> -->
>
> <!-- To notify the postmaster that a relay request was denied,
> uncomment this matcher/mailet configuration -->
> <!--
> <mailet match="All" class="NotifyPostmaster"/>
> -->
>
> <mailet match="All" class="ToRepository">
> <repositoryPath>file://var/mail/relay-denied/</repositoryPath>
> <!-- An alternative database repository example follows. -->
> <!--
> <repositoryPath> db://maildb/deadletter/relay-denied
> </repositoryPath>
> -->
> </mailet>
> </processor>
>
> <!-- This processor handle the bounces from RemoteDelivery: As of
> James v2.3, this is the new -->
> <!-- Default. -->
> <!-- -->
> <!-- DSNBounce properly create a DSN compliant bounce -->
> <processor name="bounces">
> <mailet match="All" class="DSNBounce">
> <passThrough>false</passThrough>
>
> <!-- optional subject prefix prepended to the original
> message -->
> <!--
> <prefix>[bounce]</prefix>
> -->
>
> <!-- message, heads or none, default=message -->
> <!--
> <attachment>heads</attachment>
> -->
>
> <!-- the message sent in the bounce, the first occurrence of
> the pattern [machine] is -->
> <!-- replaced with the name of the executing machine -->
> <!-- Default: Hi. This is the James mail server at [machine]
> ... -->
> <!--
> <messageString>Here is [machine]. I'm not able to deliver this
> message.</messageString>
> -->
> </mailet>
> </processor>
> </spoolmanager>
>
> <!-- DNS Server Block -->
> <!-- -->
> <!-- Specifies DNS Server information for use by various components
> inside -->
> <!-- James. -->
> <!-- -->
> <!-- If autodiscover is true, James will attempt to autodiscover the DNS
> servers configured on your underlying system.-->
> <!-- Currently, this works if the OS has a unix-like
> /etc/resolv.conf,-->
> <!-- or the system is Windows based with ipconfig or winipcfg.-->
> <!-- -->
> <!-- If no DNS servers are found and you have not specified any below,
> 127.0.0.1 will be used-->
> <!-- If you use autodiscover and add DNS servers manually a combination
> of all the dns servers will be used -->
> <!-- -->
> <!-- Information includes a list of DNS Servers to be used by James.
> These are -->
> <!-- specified by the server elements, each of which is a child element
> of the -->
> <!-- servers element. Each server element is the IP address of a single
> DNS server. -->
> <!-- The servers element can have multiple server children. -->
> <dnsserver>
> <servers>
> <!--Enter ip address of your DNS server, one IP address per
> server -->
> <!-- element. -->
> <!--
> <server>127.0.0.1</server>
> -->
> <server>localhost</server>
> </servers>
> <!-- Change autodiscover to false if you would like to turn off
> autodiscovery -->
> <!-- and set the DNS servers manually in the <servers> section -->
> <!--<autodiscover>true</autodiscover>-->
> <autodiscover>true</autodiscover>
> <authoritative>false</authoritative>
> <!--
> <autodiscover>false</autodiscover>
> <authoritative>false</authoritative>
> -->
>
> <!-- Maximum number of entries to maintain in the DNS cache -->
> <maxcachesize>50000</maxcachesize>
> </dnsserver>
>
> <!-- The RemoteManager server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <remotemanager enabled="true">
> <port>4555</port>
> <!-- Uncomment this if you want to bind to a specific
> inetaddress -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <!--
> <useTLS>true</useTLS>
> -->
> <handler>
> <!-- This is the name used by the server to identify itself in the
> RemoteManager -->
> <!-- protocol. If autodetect is TRUE, the server will discover
> its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is FALSE,
> James -->
> <!-- will use the specified value. -->
> <helloName autodetect="false">mail.zuuk.com</helloName>
> <administrator_accounts>
> <!-- CHECKME! -->
> <!-- Change the default login/password. -->
> <account login="root" password="XXXXXXXXXX"/>
> </administrator_accounts>
> <connectiontimeout> 60000 </connectiontimeout>
> <!-- The prompt directive adds a prompt to every output from
> RemoteManager -->
> <!--
> <prompt>james></prompt>
> -->
> </handler>
> </remotemanager>
>
> <!-- The POP3 server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <pop3server enabled="true">
> <!-- port 995 is the well-known/IANA registered port for POP3S ie
> over SSL/TLS -->
> <!-- port 110 is the well-known/IANA registered port for Standard
> POP3 -->
> <port>110</port>
>
> <!-- Uncomment this if you want to bind to a specific inetaddress -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <!--
> <useTLS>true</useTLS>
> -->
>
> <handler>
> <!-- This is the name used by the server to identify itself in the
> POP3 -->
> <!-- protocol. If autodetect is TRUE, the server will discover
> its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is FALSE,
> James -->
> <!-- will use the specified value. -->
> <helloName autodetect="false">mail.zuuk.com</helloName>
> <connectiontimeout>120000</connectiontimeout>
> </handler>
> </pop3server>
>
> <!-- The POP3S server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <pop3server-tls enabled="false">
> <!-- port 995 is the well-known/IANA registered port for POP3S ie
> over SSL/TLS -->
> <!-- port 110 is the well-known/IANA registered port for Standard
> POP3 -->
> <port>995</port>
>
> <!-- Uncomment this if you want to bind to a specific inetaddress -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <useTLS>true</useTLS>
>
> <handler>
> <!-- This is the name used by the server to identify itself in the
> POP3 -->
> <!-- protocol. If autodetect is TRUE, the server will discover
> its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is FALSE,
> James -->
> <!-- will use the specified value. -->
> <helloName autodetect="false">mail.zuuk.com</helloName>
> <connectiontimeout>120000</connectiontimeout>
> </handler>
> </pop3server-tls>
>
> <!-- The SMTP server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <smtpserver enabled="true">
> <!-- port 25 is the well-known/IANA registered port for SMTP -->
> <port>25</port>
>
> <!-- Uncomment this if you want to bind to a specific inetaddress -->
> <!-- Please NOTE: you should add this IP also to your
> RemoteAddrNotInNetwork -->
> <!-- in order to avoid relay check for locallly generated bounces -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <!--
> <useTLS>true</useTLS>
> -->
>
> <handler>
> <!-- This is the name used by the server to identify itself in the
> SMTP -->
> <!-- protocol. If autodetect is TRUE, the server will discover
> its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is FALSE,
> James -->
> <!-- will use the specified value. -->
> <helloName autodetect="false">mail.zuuk.com</helloName>
> <connectiontimeout>360000</connectiontimeout>
>
> <!-- Uncomment this if you want to require SMTP authentication.
>
> supported values:
> true: required but announced only to not authorizedAddresses
> false: don't use AUTH
> announce: like true, but always announce AUTH capability to
> clients
>
> The correct behaviour per RFC value would be false or
> announce
> but we still support true for backward compatibility and
> because
> some webmail client fails when AUTH is announced but no
> authentication
> information has been provided
> -->
> <authRequired>true</authRequired>
> <!--
> <authRequired>announce</authRequired>
> -->
>
> <!-- CHECKME! -->
> <!-- Uncomment this if you want to authorize specific
> addresses/networks.
> If you use SMTP AUTH, addresses that match those specified
> here will
> be permitted to relay without SMTP AUTH. If you do not use
> SMTP
> AUTH, and you specify addreses here, then only addresses
> that match
> those specified will be permitted to relay.
>
> Addresses may be specified as a an IP address or domain
> name, with an
> optional netmask, e.g.,
>
> 127.*, 127.0.0.0/8, 127.0.0.0/255.0.0.0, and localhost/8 are
> all the same
>
> See also the RemoteAddrNotInNetwork matcher in the transport
> processor.
> You would generally use one OR the other approach.
> -->
> <!--CBL
> <authorizedAddresses>127.0.0.0/8</authorizedAddresses>
> -->
>
> <!-- Uncomment this if you want to verify sender addresses,
> ensuring that -->
> <!-- the sender address matches the user who has
> authenticated. -->
> <!-- This prevents a user of your mail server from acting as
> someone else -->
> <verifyIdentity>true</verifyIdentity>
>
> <!-- This sets the maximum allowed message size (in kilobytes)
> for this -->
> <!-- SMTP service. If unspecified, the value defaults to 0, which
> means no limit. -->
> <maxmessagesize>0</maxmessagesize>
>
> <!-- This sets wether to enforce the use of HELO/EHLO salutation
> before a -->
> <!-- MAIL command is accepted. If unspecified, the value defaults
> to true -->
> <heloEhloEnforcement>true</heloEhloEnforcement>
>
> <!-- SMTP Handler Chain customization -->
> <!-- Uncomment this and edit james-smtphandlerchain.xml
> configuration file to -->
> <!-- enable the experimental fastfail features. Look at the
> james-smtphandlerchain.xml -->
> <!-- for further informations -->
> <!--
> &smtphandlerchainConfig;
> -->
>
> </handler>
> </smtpserver>
>
> <!-- The SMTPS server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <smtpserver-tls enabled="false">
> <!-- port 25 is the well-known/IANA registered port for SMTP -->
> <port>465</port>
>
> <!-- Uncomment this if you want to bind to a specific inetaddress -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <useTLS>true</useTLS>
>
> <handler>
> <!-- This is the name used by the server to identify itself in the
> SMTP -->
> <!-- protocol. If autodetect is TRUE, the server will discover
> its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is FALSE,
> James -->
> <!-- will use the specified value. -->
> <helloName autodetect="false">mail.zuuk.com</helloName>
> <connectiontimeout>360000</connectiontimeout>
>
> <!-- Uncomment this if you want to require SMTP
> authentication. -->
> <authRequired>true</authRequired>
>
> <!-- Uncomment this if you want to verify sender addresses,
> ensuring that -->
> <!-- the sender address matches the user who has
> authenticated. -->
> <!-- This prevents a user of your mail server from acting as
> someone else -->
> <verifyIdentity>true</verifyIdentity>
>
> <!-- This sets the maximum allowed message size (in kilobytes)
> for this -->
> <!-- SMTP service. If unspecified, the value defaults to 0, which
> means no limit. -->
> <maxmessagesize>10485760</maxmessagesize>
> </handler>
> </smtpserver-tls>
>
> <!-- The NNTP server is enabled by default -->
> <!-- Disabling blocks will stop them from listening, -->
> <!-- but does not free as many resources as removing them would -->
> <!-- NNTP-specific: if you disable the NNTP Server, you should also set
> the nntp-repository's
> threadCount to 0, otherwise there will be threads active and
> polling -->
> <nntpserver enabled="false">
> <!-- THE NNTP PROTOCOL IS EXPERIMENTAL AND NOT AS WELL TESTED AS SMTP
> AND POP3 IN THIS RELEASE.
> The James project recommends that you check the James web site for
> updates to the NNTP
> service. -->
> <!-- port 563 is the well-known/IANA registered port for NNTP over
> SSL/TLS -->
> <!-- port 119 is the well-known/IANA registered port for Standard
> NNTP -->
> <port>119</port>
>
> <!-- Uncomment this if you want to bind to a specific inetaddress -->
> <!--
> <bind> </bind>
> -->
> <!-- Uncomment this if you want to use TLS (SSL) on this port -->
> <!--
> <useTLS>true</useTLS>
> -->
>
> <handler>
> <!-- This is the name used by the server to identify itself in the
> NNTP -->
> <!-- protocol. If autodetect is TRUE, the server will discover
> its -->
> <!-- own host name and use that in the protocol. If discovery
> fails, -->
> <!-- the value of 'localhost' is used. If autodetect is FALSE,
> James -->
> <!-- will use the specified value. -->
> <helloName autodetect="false">mail.zuuk.com</helloName>
> <connectiontimeout>120000</connectiontimeout>
> <!-- Set the authRequired value to true to enable authenticated
> NNTP -->
> <authRequired>false</authRequired>
> </handler>
> </nntpserver>
>
> <nntp-repository>
> <!-- If this is set to true, posting will be disallowed. -->
> <readOnly>false</readOnly>
>
> <rootPath>file://var/nntp/groups</rootPath>
> <tempPath>file://var/nntp/temp</tempPath>
> <articleIDPath>file://var/nntp/articleid</articleIDPath>
> <articleIDDomainSuffix>news.james.apache.org</articleIDDomainSuffix>
>
> <!-- The news groups hosted in this NNTP repository. -->
> <!-- Groups here will be added to those found in the file system,
> but removing groups from here will NOT remove them from the
> server. Change <newsgroups> to <newsgroups only="true"> to
> restrict newsgroups to ONLY those found in this list. -->
> <newsgroups>
> <newsgroup>org.apache.james.dev</newsgroup>
> <newsgroup>org.apache.james.user</newsgroup>
> <newsgroup>org.apache.avalon.dev</newsgroup>
> <newsgroup>org.apache.avalon.user</newsgroup>
> </newsgroups>
>
> <spool>
> <configuration>
> <spoolPath>file://var/nntp/spool</spoolPath>
> <!-- The number of threads that process spooler related
> tasks. -->
> <threadCount>1</threadCount>
> <!-- The spool thread(s) should idle for some time, if it has
> nothing to do -->
> <threadIdleTime>60000</threadIdleTime>
> </configuration>
> </spool>
> </nntp-repository>
>
> <!-- Spool repository configuration -->
> <!-- The spool repository is the location where incoming mails are
> temporarily stored -->
> <!-- before being processed. -->
> <spoolrepository destinationURL="file://var/mail/spool/" type="SPOOL"/>
>
> <!-- Alternative spool repository definition for JDBC use -->
> <!--
> <spoolrepository destinationURL="db://maildb/spool/spool" type="SPOOL"/>
> -->
>
> <!-- Alternative spool repository definition for JDBC use -->
> <!-- Stores message body in file system, rest in database -->
> <!--
> <spoolrepository destinationURL="dbfile://maildb/spool/spool"
> type="SPOOL"/>
> -->
>
> <!-- The Mailstore block -->
> <mailstore>
> <repositories>
>
> <!-- File based repositories. These repositories store all
> message data -->
> <!-- in the file system. -->
> <repository
> class="org.apache.james.mailrepository.AvalonMailRepository">
> <protocols>
> <protocol>file</protocol>
> </protocols>
> <types>
> <type>MAIL</type>
> </types>
> </repository>
> <repository
> class="org.apache.james.mailrepository.AvalonSpoolRepository">
> <protocols>
> <protocol>file</protocol>
> </protocols>
> <types>
> <type>SPOOL</type>
> </types>
> </repository>
>
> <!-- JDBC based repositories. These repositories store all
> message data -->
> <!-- in the database. -->
> <repository
> class="org.apache.james.mailrepository.JDBCMailRepository">
> <protocols>
> <protocol>db</protocol>
> </protocols>
> <types>
> <type>MAIL</type>
> </types>
> <config>
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> <!-- Set the size threshold for in memory handling of
> storing operations -->
> <!-- Default is currently 409600000 due to a bug with mysql
> and binary stream -->
> <!-- currently under investigation. Please change this only
> if you know what -->
> <!-- you do, this is EXPERIMENTAL -->
> <!--
> <inMemorySizeLimit>4096</inMemorySizeLimit>
> -->
> </config>
> </repository>
>
> <repository
> class="org.apache.james.mailrepository.JDBCSpoolRepository">
> <protocols>
> <protocol>db</protocol>
> </protocols>
> <types>
> <type>SPOOL</type>
> </types>
> <config>
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> <maxcache>1000</maxcache>
> <!-- Set the size threshold for in memory handling of
> storing operations -->
> <!-- Default is currently 409600000 due to a bug with mysql
> and binary stream -->
> <!-- currently under investigation. Please change this only
> if you know what -->
> <!-- you do, this is EXPERIMENTAL -->
> <!--
> <inMemorySizeLimit>4096</inMemorySizeLimit>
> -->
> </config>
> </repository>
>
> <!-- These repositories store message delivery and headers in the
> DB, and the body to the filesystem -->
> <repository
> class="org.apache.james.mailrepository.JDBCMailRepository">
> <protocols>
> <protocol>dbfile</protocol>
> </protocols>
> <types>
> <type>MAIL</type>
> </types>
> <config>
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> <filestore>file://var/dbmail</filestore>
> </config>
> </repository>
>
> <repository
> class="org.apache.james.mailrepository.JDBCSpoolRepository">
> <protocols>
> <protocol>dbfile</protocol>
> </protocols>
> <types>
> <type>SPOOL</type>
> </types>
> <config>
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> <filestore>file://var/dbmail</filestore>
> <maxcache>1000</maxcache>
> </config>
> </repository>
>
> <!-- The mbox repository is designed for MAIL only; SPOOL
> performance would be less than ideal-->
> <repository
> class="org.apache.james.mailrepository.MBoxMailRepository">
> <protocols>
> <protocol>mbox</protocol>
> </protocols>
> <types>
> <type>MAIL</type>
> </types>
> </repository>
>
> <repository
> class="org.apache.james.mailrepository.filepair.File_Persistent_Object_Repository">
> <protocols>
> <protocol>file</protocol>
> </protocols>
> <types>
> <type>OBJECT</type>
> </types>
> <models>
> <model>SYNCHRONOUS</model>
> <model>ASYNCHRONOUS</model>
> <model>CACHE</model>
> </models>
> </repository>
>
> <repository
> class="org.apache.james.mailrepository.filepair.File_Persistent_Stream_Repository">
> <protocols>
> <protocol>file</protocol>
> </protocols>
> <types>
> <type>STREAM</type>
> </types>
> <models>
> <model>SYNCHRONOUS</model>
> <model>ASYNCHRONOUS</model>
> <model>CACHE</model>
> </models>
> </repository>
> </repositories>
>
> </mailstore>
>
>
> <!-- The User Storage block -->
> <users-store>
> <!-- Configure User Repositories here. -->
> <!-- -->
> <!-- User repositories are required for the following purposes: -->
> <!-- - storing James user information, including forwards,
> aliases, -->
> <!-- and authentication data. -->
> <!-- - holding lists of users for the listserv mailet -->
> <!-- Currently, two different storage options are available: -->
> <!-- - file-based storage using Java serialization -->
> <!-- - database-backed storage -->
> <!-- (Use of database or file-system is defined on a "per-repository"
> basis) -->
> <!-- -->
> <!-- Note: One user repository is required for James: -->
> <!-- LocalUsers - the users for whom you are providing POP3, NNTP,
> or SMTP service -->
> <!-- -->
> <!-- Other repositories may be used by matchers or mailets. -->
>
> <!-- Default: File-based user repositories Use these configurations
> to store user info in the filesystem -->
> <!-- The LocalUsers repository, for storing James' User info. -->
> <!--CBL
> <repository name="LocalUsers"
> class="org.apache.james.userrepository.UsersFileRepository">
> <destination URL="file://var/users/"/>
> </repository>
> -->
>
>
> <!-- Database backed user repositories -->
> <!-- -->
> <!-- Use these configurations to store user info in a database. -->
> <!-- Note: The <data-source> element must refer to a connection
> configured -->
> <!-- in the <database-connections> configuration section. -->
>
> <!-- The LocalUsers repository, for storing James' User info. -->
> <repository name="LocalUsers"
> class="org.apache.james.userrepository.JamesUsersJdbcRepository"
> destinationURL="db://maildb/users">
> <sqlFile>file://conf/sqlResources.xml</sqlFile>
> </repository>
>
> <!-- This is an example configuration including configuration for a
> list server. -->
> <!-- CHECKME: before uncommenting this, edit the configuration file's
> contents -->
> <!--
> &listserverStores;
> -->
>
> </users-store>
>
> <!-- The database-connections block -->
> <database-connections>
> <!-- These connections are referred to by name elsewhere in the
> config file -->
> <!-- CHECKME! -->
> <!-- To allow James to use a database you must configure the database
> connection here. -->
> <!-- If you are not using a database, you can leave this section
> unchanged. -->
> <!-- These connections are referred to by name in URLs elsewhere in
> the config file. -->
> <!--
> James has previously used an in-house connection pool, Mordred.
> Mordred is being deprecated in favor of Jakarta Commons DBCP.
> To use DBCP: org.apache.james.util.dbcp.JdbcDataSource
> To use Mordred: org.apache.james.util.mordred.JdbcDataSource
>
> Change it back, of course, to use Mordred.
>
> NOTE: DBCP is configured to recover from a database server
> outage.
> This, alone, may be reason for you to give it a try.
> -->
>
> <!-- Default James distribution includes Apache Derby database, -->
> <!-- which is easy to embed - but we support all the major SQL -->
> <!-- databases - just reconfigure your JDBC configuration -->
> <!--
> <data-source name="maildb"
> class="org.apache.james.util.dbcp.JdbcDataSource">
> <driver>org.apache.derby.jdbc.EmbeddedDriver</driver>
> <dburl>jdbc:derby:../apps/james/var/derbydb;create=true</dburl>
> <user></user>
> <password></password>
> <poolPreparedStatements>true</poolPreparedStatements>
> <max>20</max>
> </data-source>
> -->
>
> <!-- JDBC driver .jar libraries for other RDBMS can be placed in
> ~james/lib/ -->
>
> <!-- You can download latest Connector/J from -->
> <!-- http://dev.mysql.com/downloads/connector/j/3.1.html -->
> <!-- -->
> <!-- Example, connecting to a MySQL database called "mail" on
> localhost-->
> <!-- -->
> <!-- The max value is the maximum number of concurrent connections
> James will -->
> <!-- open to this database-->
> <!-- If you see "SQLException: Giving up... no connections
> available." in your -->
> <!-- log files or bounced mail you should increase this value -->
> <!--
> <data-source name="maildb"
> class="org.apache.james.util.dbcp.JdbcDataSource">
> <driver>com.mysql.jdbc.Driver</driver>
> <dburl>jdbc:mysql://127.0.0.1/mail?autoReconnect=true</dburl>
> <user>username</user>
> <password>password</password>
> <max>20</max>
> </data-source>
> -->
> <data-source name="maildb"
> class="org.apache.james.util.mordred.JdbcDataSource">
> <driver>org.gjt.mm.mysql.Driver</driver>
>
> <dburl>jdbc:mysql://localhost.localdomain/james?autoReconnect=true</dburl>
> <user>james</user>
> <password>XXXXXXXXX</password>
> <max>35</max>
> </data-source>
>
> <!-- Example, connecting to a Microsoft MSSQL database called "mail"
> on localhost-->
> <!-- -->
> <!-- The max value is the maximum number of concurrent connections
> James will -->
> <!-- open to this database-->
> <!-- If you see "SQLException: Giving up... no connections
> available." in your -->
> <!-- log files or bounced mail you should increase this value -->
> <!--
> <data-source name="maildb"
> class="org.apache.james.util.dbcp.JdbcDataSource">
> <driver>com.inet.tds.TdsDriver</driver>
> <dburl>jdbc:inetdae7:127.0.0.1?database=James</dburl>
> <user>sa_james</user>
> <password>blahblah</password>
> <max>20</max>
> </data-source>
> -->
>
> <!-- Here is a configuration for hsqldb (formerly HypersonicSQL) -->
> <!-- You can download the db from http://www.hsqldb.org/ . Just put
> the -->
> <!-- hsqldb.jar in the lib directory and uncomment the following
> block -->
> <!--
> <data-source name="maildb"
> class="org.apache.james.util.dbcp.JdbcDataSource">
> <driver>org.hsqldb.jdbcDriver</driver>
> <dburl>jdbc:hsqldb:target/data/hsqldb</dburl>
> <user>sa</user>
> <password></password>
> <max>20</max>
> </data-source>
> -->
>
> </database-connections>
>
> <!-- Configuration for Cornerstone Services -->
> <!-- -->
> <!-- For a simple configuration, nothing beneath this line should
> require -->
> <!-- alteration. -->
> <!-- -->
> <!-- You will need to adjust the Socket Manager service configuration if
> you want -->
> <!-- to enable secure sockets (TLS) for any James
> -->
> <!-- -->
> <!-- Complex or high volume configurations may require changes to the
> parameters -->
> <!-- in this section. Please read the James and Avalon documentation
> before -->
> <!-- attempting to adjust this section. -->
> <!-- -->
>
> <!-- The Connection Manager block -->
> <!-- -->
> <!-- The idle-timeout is the number of milliseconds that it will take
> for idle -->
> <!-- client connections managed by this connection manager to be marked
> at timed out. -->
> <!-- If no value is specified, the value defaults to 5 minutes, 300000
> milliseconds -->
> <!-- A value of 0 means that client sockets will not timeout. -->
> <!-- -->
> <!-- The max-connections parameter specifies the default maximum number
> of client -->
> <!-- connections that this connection manager will allow per managed
> server socket. -->
> <!-- This value can be overridden by each individual service. -->
> <!-- If no value is specified, the value defaults to 30. -->
> <!-- A value of 0 creates a maximum of 1 connection due to the use of
> the HardResourceLimiting -->
> <!-- thread pool by the ServerConnection class. -->
> <!-- Resource limitations imposed by other components (i.e. max # of
> threads) may -->
> <!-- serve to limit the number of open connections. -->
> <!-- -->
> <connections>
> <idle-timeout>300000</idle-timeout>
> <max-connections>30</max-connections>
> </connections>
>
> <!-- The Socket Manager block -->
> <!-- -->
> <!-- The server-sockets element has a number of factory
> sub-elements. -->
> <!-- Each of the factory elements has a name and class attribute -->
> <!-- The name attribute for each factory element must be unique. -->
> <!-- The class attribute is the name of a class that implements the -->
> <!-- interface
> org.apache.avalon.cornerstone.services.ServerSocketFactory -->
> <!-- Specific factory elements may require some sub-elements. This
> is -->
> <!-- factory class dependent. -->
> <!-- -->
> <!-- The client-sockets element has a number of factory
> sub-elements. -->
> <!-- Each of the factory elements has a name and class attribute -->
> <!-- The name attribute for each factory element must be unique. -->
> <!-- The class attribute is the name of a class that implements the -->
> <!-- interface org.apache.avalon.cornerstone.services.SocketFactory -->
> <!-- Specific factory elements may require some sub-elements. This
> is -->
> <!-- factory class dependent. -->
> <!-- -->
> <!-- In order to use the ssl factory under Java 1.5 and support all
> Clients -->
> <!-- (particularly Mozilla Thunderbird) you need to install the Sun
> JCE -->
> <!-- provider in your environment (james/lib) -->
> <!-- e.g: jre/lib/ext/sunjce_provider.jar -->
> <!-- -->
> <sockets>
> <server-sockets>
> <factory name="plain"
> class="org.apache.avalon.cornerstone.blocks.sockets.DefaultServerSocketFactory"/>
> <factory name="ssl"
> class="org.apache.avalon.cornerstone.blocks.sockets.TLSServerSocketFactory">
> <ssl-factory>
> <keystore>
> <file>conf/mail.zuuk.com.jks</file>
> <password>XXXXXXXXX</password>
> <key-password>XXXXXXXXX</key-password>
> <type>JKS</type>
> <protocol>TLS</protocol>
> <algorithm>SunX509</algorithm>
> <authenticate-client>false</authenticate-client>
> </keystore>
> </ssl-factory>
> </factory>
> </server-sockets>
> <client-sockets>
> <factory name="plain"
> class="org.apache.avalon.cornerstone.blocks.sockets.DefaultSocketFactory"/>
> </client-sockets>
> </sockets>
>
> <!-- The Thread Manager block -->
> <!-- -->
> <!-- The thread manager provides thread pools for use throughout the
> server. -->
> <!-- -->
> <!-- A thread pool with the name "default" must be defined in this
> thread manager -->
> <!-- configuration. -->
> <!-- -->
> <!-- Each thread pool is defined with a "thread-group" element. -->
> <!-- Each of these elements has the following required sub-elements: -->
> <!-- name - the name of the thread pool, used by other components
> to -->
> <!-- lookup the thread pool -->
> <!-- priority - the thread priority for threads in the pool. This
> is -->
> <!-- a value between 0 and 10, with 5 being the normal -->
> <!-- priority and 10 being the maximum. -->
> <!-- is-daemon - whether the threads in the pool are daemon
> threads. -->
> <!-- max-threads - the maximum number of threads allowed in the
> pool. -->
> <!-- min-threads - the minimum number of threads allowed in the pool.
> (not implemented) -->
> <!-- min-spare-threads - (not implemented) -->
> <thread-manager>
> <thread-group>
> <name>default</name>
> <priority>5</priority>
> <is-daemon>false</is-daemon>
> <max-threads>100</max-threads>
> <min-threads>20</min-threads>
> <min-spare-threads>20</min-spare-threads>
> </thread-group>
> </thread-manager>
> </config>
>
>
>
--------------------------------------------------------------------------------
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org