You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@turbine.apache.org by Quinton McCombs <qu...@bellsouth.net> on 2002/12/13 06:29:33 UTC
Documentation update
I have created some documentation for migrating from 2.1 to 2.2 and
updated the Extend User howto. I was hoping some of you could take a
moment to look over what I have done and comment. I did the docs in
xdoc format. The links below are to the generated HTML version.
Depending on feedback, I will submit the patches and new files to the
dev list in the next week.
Migration:
http://blaze.qdog.org/preview/howto/migration-from-2_1.html
Extend User:
http://blaze.qdog.org/preview/howto/extend-user-howto.html
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Documentation update
Posted by Quinton McCombs <qm...@nequalsone.com>.
This has already been corrected. The methods are still there even for
an extended TurbineUser.
-----Original Message-----
From: Eric Emminger [mailto:eric@ericemminger.com]
Sent: Friday, December 13, 2002 3:00 PM
To: Turbine Users List
Subject: Re: Documentation update
Great work Quinton!
I glanced over both. I have one question. On the Migration how-to, under
Extending Turbine User, you say "getTemp()) and setTemp() methods no
longer exist in TurbineUser." Does this only apply to an extended User?
It works fine with a non-extended User in 2.2-rc2, so unless this has
changed in the 2.2 production release, you might want to fix this.
Again, excellent job!
Eric
--
Eric Emminger
eric@ericemminger.com
--
To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Documentation update
Posted by Eric Emminger <er...@ericemminger.com>.
Great work Quinton!
I glanced over both. I have one question. On the Migration how-to, under
Extending Turbine User, you say "getTemp()) and setTemp() methods no
longer exist in TurbineUser." Does this only apply to an extended User?
It works fine with a non-extended User in 2.2-rc2, so unless this has
changed in the 2.2 production release, you might want to fix this.
Again, excellent job!
Eric
--
Eric Emminger
eric@ericemminger.com
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Eigen Technology Pty Ltd <mi...@eigentechnology.com>.
I am really baffled by this Velocity behaviour ...
The returned valued from the BaseXXX.java file for value A, B and C are
all int. However, only only condition for test B works, I tried:
#if ($entry.A < 0)
and
#if ($entry.A > 0)
both failed. This indicates that $entry.A is probably not even an integer
or numerical value. What is the type for return value like this? And why
does B work and not A ??
getting really confused here.
thanks for any help
michael
>
> all of your A, B, and C are in fact Integer, the java Object, so
> try
>
> #if ($entry.A.intValue() == 3)
> ....
> #end
>
> Eigen Technology Pty Ltd wrote:
>> Dear all,
>>
>> I have the following expression in one of my Velocity file:
>>
>> #foreach ($entry in $entries)
>> <tr>
>> #if($entry.A == 3)
>> #entryCell ($entry.Id)
>> #entryCell ($entry.A)
>> #entryCell ($entry.B)
>> #entryCell ($entry.C)
>> </tr>
>> #end
>> #end
>>
>> the comparison expression only works for $entry.B, neither $entry.A
>> nor $entry.C work, i.e. A and C return no result. All A, B and C are
>> int. I have tried to compare as number (3) and text ("3"), only
>> getting the same result. What is limiting the expression? Would
>> appreciate some hints.
>>
>> best wishes
>> michael
>>
>>
>>
>>
>> --
>> To unsubscribe, e-mail:
>> <ma...@jakarta.apache.org> For additional
>> commands, e-mail: <ma...@jakarta.apache.org>
>>
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org> For additional
> commands, e-mail: <ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by "Henning P. Schmiedehausen" <hp...@intermeta.de>.
"Eigen Technology Pty Ltd" <mi...@eigentechnology.com> writes:
>Alright guys, I may not sound very intelligent on this matter, but I am
>really frustrated with the outcome given by Velocity. I changed A and C
>to VARCHAR and it worked!!
Yep. That's an ongoing source of frustration for Velocity newcomers and
seasoned users. Geir wants it that way and there is no way around it.
You might even check if it really checks the value against 3 (value
three) or "3" (string containing '3' char).
>But I am not really satisfied with this outcome, there must be a logical
>explanation to this, why INT works for some but not others?
Uh, there is a _longish_ thread about this in the velocity-dev
archives. I even had some patches for Velocity 1.1 at some point to
fix this behaviour which Geir didn't want.
Conclusion was "Velocity is a templating language, not a programming
language. If you do business logic in it, you're doing something
wrong". No, that's not _my_ opinion.
Regards
Henning
--
Dipl.-Inf. (Univ.) Henning P. Schmiedehausen -- Geschaeftsfuehrer
INTERMETA - Gesellschaft fuer Mehrwertdienste mbH hps@intermeta.de
Am Schwabachgrund 22 Fon.: 09131 / 50654-0 info@intermeta.de
D-91054 Buckenhof Fax.: 09131 / 50654-20
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Eigen Technology Pty Ltd <mi...@eigentechnology.com>.
Alright guys, I may not sound very intelligent on this matter, but I am
really frustrated with the outcome given by Velocity. I changed A and C
to VARCHAR and it worked!!
But I am not really satisfied with this outcome, there must be a logical
explanation to this, why INT works for some but not others?
I am not unfamilia with programming, would really appreciate if anyone can
point out where I have done wrong.
best wishes
michael
> Thanks Wei,
>
> I have corrected the </tr> part, it gives the same result.
> Here is my schema file, I have modified it to A, B and C for the sake of
> simplicity, it is actually:
>
> <table name="INVOICEITEM">
> <column name="ID" required="true" autoIncrement="true"
> primaryKey="true" type="INTEGER"/>
> <column name="INVOICEREF" size="10" type="INTEGER"/>
> <column name="CUSTOMERREF" size="10" type="INTEGER"/>
> <column name="QUANTITY" size="10" type="INTEGER"/>
> <column name="PARTICULAR" size="50" type="VARCHAR"/>
> <column name="UNITPRICE" type="FLOAT"/>
> <column name="TAX" type="FLOAT"/>
> <column name="AMOUNT" type="FLOAT"/>
> <column name="COMMENT" type="LONGVARCHAR"/>
> <foreign-key foreignTable="CUSTOMER">
> <reference local="QUANTIT2" foreign="ID"/>
> </foreign-key>
> <foreign-key foreignTable="INVOICE">
> <reference local="INVOICEREF" foreign="ID"/>
> </foreign-key>
> </table>
>
> only Quantity worked, invoiceref, id, customerref, amount etc all failed
> the expression test.
>
> thanks
> michael
>
>
>
>
>>
>> what is your schema look like? also, i noticed that you <tr> should be
>> outside of inner #if #end block. this may cause problem in you
>> displayed result as well. do a view source in you browser to see if
>> the syntax is
>> correct.
>>
>> >>> #foreach ($entry in $entries)
>> >>> <tr>
>> >>> #if($entry.A == 3)
>> >>> #entryCell ($entry.Id)
>> >>> #entryCell ($entry.A)
>> >>> #entryCell ($entry.B)
>> >>> #entryCell ($entry.C)
>> >>> </tr>
>> >>> #end
>> >>> #end
>> >>>
>>
>> Eigen Technology Pty Ltd wrote:
>>> Thanks,
>>>
>>> I tried your method, but I got the same result, i.e B is working, A
>>> and C do not work. I tried to swap A and B in the database, again,
>>> only the new B worked, A still does not work. Help would
>>> appreciated.
>>>
>>> best wishes
>>> michael
>>>
>>>
>>>
>>>
>>>
>>>>all of your A, B, and C are in fact Integer, the java Object, so try
>>>>
>>>>#if ($entry.A.intValue() == 3)
>>>>....
>>>>#end
>>>>
>>>>Eigen Technology Pty Ltd wrote:
>>>>
>>>>>Dear all,
>>>>>
>>>>>I have the following expression in one of my Velocity file:
>>>>>
>>>>> #foreach ($entry in $entries)
>>>>> <tr>
>>>>> #if($entry.A == 3)
>>>>> #entryCell ($entry.Id)
>>>>> #entryCell ($entry.A)
>>>>> #entryCell ($entry.B)
>>>>> #entryCell ($entry.C)
>>>>> </tr>
>>>>> #end
>>>>> #end
>>>>>
>>>>>the comparison expression only works for $entry.B, neither $entry.A
>>>>> nor $entry.C work, i.e. A and C return no result. All A, B and C
>>>>> are int. I have tried to compare as number (3) and text ("3"), only
>>>>> getting the same result. What is limiting the expression? Would
>>>>> appreciate some hints.
>>>>>
>>>>>best wishes
>>>>>michael
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>--
>>>>>To unsubscribe, e-mail:
>>>>><ma...@jakarta.apache.org> For additional
>>>>> commands, e-mail: <ma...@jakarta.apache.org>
>>>>>
>>>>
>>>>--
>>>>To unsubscribe, e-mail:
>>>><ma...@jakarta.apache.org> For additional
>>>> commands, e-mail: <ma...@jakarta.apache.org>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> To unsubscribe, e-mail:
>>> <ma...@jakarta.apache.org> For additional
>>> commands, e-mail: <ma...@jakarta.apache.org>
>>>
>>
>>
>> --
>> Wei He, Ph.D.
>> Email: weihe@optonline.net
>> Voice: (845)359-5621
>> Fax: (845)359-1631
>>
>>
>> --
>> To unsubscribe, e-mail:
>> <ma...@jakarta.apache.org> For additional
>> commands, e-mail: <ma...@jakarta.apache.org>
>
>
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org> For additional
> commands, e-mail: <ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Rodney Schneider <ro...@actf.com.au>.
On Mon, 16 Dec 2002 16:26, you wrote:
> Thanks, that worked.
>
> These are crucial information that a website developer should know. I
> may have missed it in the documentations, if that is the case, please
> tell me where I can find info like that, so that I won't have to
> bother others.
Here is an exceprt from the TDK Howto:
"The java classes that Turbine uses to access your database are located
in the directory "webapps/APPNAME/WEB-INF/src/java/PACKAGE/om" Look at
them to get an idea of how the object-model portion of Turbine
operates. There should be one named after each of the tables that you
defined above in your schema. These classes will be used to interact
with the database while using Turbine."
Also see the Velocity User Guide:
http://jakarta.apache.org/velocity/user-guide.html
If you think the documentation should be clearer, you can always submit
a patch :)
Regards,
-- Rodney
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Eigen Technology Pty Ltd <mi...@eigentechnology.com>.
Thanks, that worked.
These are crucial information that a website developer should know. I may
have missed it in the documentations, if that is the case, please tell me
where I can find info like that, so that I won't have to bother others.
best wishes
michael
>
> OK, the ref columns are foreign-key columns, they are returned as
> NumberKey object, all numeric primar keys in your tables are directly
> returned as NumberKey as well.
>
> Here is what you can do:
>
> $entry.A.getBigDecimal().intValue()
>
> this should fix the problem, this is exactly what I was suspecting. I
> do not know if int actually gets returned for other cases as well,
> velocity handles Object only, not primitives, I think.
>
>
> Eigen Technology Pty Ltd wrote:
>> Thanks Wei,
>>
>> I have corrected the </tr> part, it gives the same result.
>> Here is my schema file, I have modified it to A, B and C for the sake
>> of simplicity, it is actually:
>>
>> <table name="INVOICEITEM">
>> <column name="ID" required="true" autoIncrement="true"
>> primaryKey="true" type="INTEGER"/>
>> <column name="INVOICEREF" size="10" type="INTEGER"/>
>> <column name="CUSTOMERREF" size="10" type="INTEGER"/>
>> <column name="QUANTITY" size="10" type="INTEGER"/>
>> <column name="PARTICULAR" size="50" type="VARCHAR"/>
>> <column name="UNITPRICE" type="FLOAT"/>
>> <column name="TAX" type="FLOAT"/>
>> <column name="AMOUNT" type="FLOAT"/>
>> <column name="COMMENT" type="LONGVARCHAR"/>
>> <foreign-key foreignTable="CUSTOMER">
>> <reference local="QUANTIT2" foreign="ID"/>
>> </foreign-key>
>> <foreign-key foreignTable="INVOICE">
>> <reference local="INVOICEREF" foreign="ID"/>
>> </foreign-key>
>> </table>
>>
>> only Quantity worked, invoiceref, id, customerref, amount etc all
>> failed the expression test.
>>
>> thanks
>> michael
>>
>>
>>
>>
>>
>>>what is your schema look like? also, i noticed that you <tr> should be
>>> outside of inner #if #end block. this may cause problem in you
>>> displayed result as well. do a view source in you browser to see if
>>> the syntax is
>>> correct.
>>>
>>> >>> #foreach ($entry in $entries)
>>> >>> <tr>
>>> >>> #if($entry.A == 3)
>>> >>> #entryCell ($entry.Id)
>>> >>> #entryCell ($entry.A)
>>> >>> #entryCell ($entry.B)
>>> >>> #entryCell ($entry.C)
>>> >>> </tr>
>>> >>> #end
>>> >>> #end
>>> >>>
>>>
>>>Eigen Technology Pty Ltd wrote:
>>>
>>>>Thanks,
>>>>
>>>>I tried your method, but I got the same result, i.e B is working, A
>>>> and C do not work. I tried to swap A and B in the database, again,
>>>> only the new B worked, A still does not work. Help would
>>>> appreciated.
>>>>
>>>>best wishes
>>>>michael
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>all of your A, B, and C are in fact Integer, the java Object, so try
>>>>>
>>>>>#if ($entry.A.intValue() == 3)
>>>>>....
>>>>>#end
>>>>>
>>>>>Eigen Technology Pty Ltd wrote:
>>>>>
>>>>>
>>>>>>Dear all,
>>>>>>
>>>>>>I have the following expression in one of my Velocity file:
>>>>>>
>>>>>> #foreach ($entry in $entries)
>>>>>> <tr>
>>>>>> #if($entry.A == 3)
>>>>>> #entryCell ($entry.Id)
>>>>>> #entryCell ($entry.A)
>>>>>> #entryCell ($entry.B)
>>>>>> #entryCell ($entry.C)
>>>>>> </tr>
>>>>>> #end
>>>>>> #end
>>>>>>
>>>>>>the comparison expression only works for $entry.B, neither $entry.A
>>>>>> nor $entry.C work, i.e. A and C return no result. All A, B and C
>>>>>> are int. I have tried to compare as number (3) and text ("3"), only
>>>>>> getting the same result. What is limiting the expression? Would
>>>>>> appreciate some hints.
>>>>>>
>>>>>>best wishes
>>>>>>michael
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>--
>>>>>>To unsubscribe, e-mail:
>>>>>><ma...@jakarta.apache.org> For additional
>>>>>> commands, e-mail: <ma...@jakarta.apache.org>
>>>>>>
>>>>>--
>>>>>To unsubscribe, e-mail:
>>>>><ma...@jakarta.apache.org> For additional
>>>>> commands, e-mail: <ma...@jakarta.apache.org>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>--
>>>>To unsubscribe, e-mail:
>>>><ma...@jakarta.apache.org> For additional
>>>> commands, e-mail: <ma...@jakarta.apache.org>
>>>>
>>>
>>>--
>>>Wei He, Ph.D.
>>>Email: weihe@optonline.net
>>>Voice: (845)359-5621
>>>Fax: (845)359-1631
>>>
>>>
>>>--
>>>To unsubscribe, e-mail:
>>><ma...@jakarta.apache.org> For additional
>>> commands, e-mail: <ma...@jakarta.apache.org>
>>
>>
>>
>>
>>
>> --
>> To unsubscribe, e-mail:
>> <ma...@jakarta.apache.org> For additional
>> commands, e-mail: <ma...@jakarta.apache.org>
>>
>
>
> --
> Wei He, Ph.D.
> Email: weihe@optonline.net
> Voice: (845)359-5621
> Fax: (845)359-1631
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org> For additional
> commands, e-mail: <ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Wei He <we...@ldeo.columbia.edu>.
OK, the ref columns are foreign-key columns, they are returned as
NumberKey object, all numeric primar keys in your tables are directly
returned as NumberKey as well.
Here is what you can do:
$entry.A.getBigDecimal().intValue()
this should fix the problem, this is exactly what I was suspecting. I
do not know if int actually gets returned for other cases as well,
velocity handles Object only, not primitives, I think.
Eigen Technology Pty Ltd wrote:
> Thanks Wei,
>
> I have corrected the </tr> part, it gives the same result.
> Here is my schema file, I have modified it to A, B and C for the sake of
> simplicity, it is actually:
>
> <table name="INVOICEITEM">
> <column name="ID" required="true" autoIncrement="true"
> primaryKey="true" type="INTEGER"/>
> <column name="INVOICEREF" size="10" type="INTEGER"/>
> <column name="CUSTOMERREF" size="10" type="INTEGER"/>
> <column name="QUANTITY" size="10" type="INTEGER"/>
> <column name="PARTICULAR" size="50" type="VARCHAR"/>
> <column name="UNITPRICE" type="FLOAT"/>
> <column name="TAX" type="FLOAT"/>
> <column name="AMOUNT" type="FLOAT"/>
> <column name="COMMENT" type="LONGVARCHAR"/>
> <foreign-key foreignTable="CUSTOMER">
> <reference local="QUANTIT2" foreign="ID"/>
> </foreign-key>
> <foreign-key foreignTable="INVOICE">
> <reference local="INVOICEREF" foreign="ID"/>
> </foreign-key>
> </table>
>
> only Quantity worked, invoiceref, id, customerref, amount etc all failed
> the expression test.
>
> thanks
> michael
>
>
>
>
>
>>what is your schema look like? also, i noticed that you <tr> should be
>>outside of inner #if #end block. this may cause problem in you displayed
>>result as well. do a view source in you browser to see if the syntax is
>> correct.
>>
>> >>> #foreach ($entry in $entries)
>> >>> <tr>
>> >>> #if($entry.A == 3)
>> >>> #entryCell ($entry.Id)
>> >>> #entryCell ($entry.A)
>> >>> #entryCell ($entry.B)
>> >>> #entryCell ($entry.C)
>> >>> </tr>
>> >>> #end
>> >>> #end
>> >>>
>>
>>Eigen Technology Pty Ltd wrote:
>>
>>>Thanks,
>>>
>>>I tried your method, but I got the same result, i.e B is working, A
>>>and C do not work. I tried to swap A and B in the database, again,
>>>only the new B worked, A still does not work. Help would appreciated.
>>>
>>>best wishes
>>>michael
>>>
>>>
>>>
>>>
>>>
>>>
>>>>all of your A, B, and C are in fact Integer, the java Object, so try
>>>>
>>>>#if ($entry.A.intValue() == 3)
>>>>....
>>>>#end
>>>>
>>>>Eigen Technology Pty Ltd wrote:
>>>>
>>>>
>>>>>Dear all,
>>>>>
>>>>>I have the following expression in one of my Velocity file:
>>>>>
>>>>> #foreach ($entry in $entries)
>>>>> <tr>
>>>>> #if($entry.A == 3)
>>>>> #entryCell ($entry.Id)
>>>>> #entryCell ($entry.A)
>>>>> #entryCell ($entry.B)
>>>>> #entryCell ($entry.C)
>>>>> </tr>
>>>>> #end
>>>>> #end
>>>>>
>>>>>the comparison expression only works for $entry.B, neither $entry.A
>>>>>nor $entry.C work, i.e. A and C return no result. All A, B and C are
>>>>>int. I have tried to compare as number (3) and text ("3"), only
>>>>>getting the same result. What is limiting the expression? Would
>>>>>appreciate some hints.
>>>>>
>>>>>best wishes
>>>>>michael
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>--
>>>>>To unsubscribe, e-mail:
>>>>><ma...@jakarta.apache.org> For additional
>>>>>commands, e-mail: <ma...@jakarta.apache.org>
>>>>>
>>>>--
>>>>To unsubscribe, e-mail:
>>>><ma...@jakarta.apache.org> For additional
>>>>commands, e-mail: <ma...@jakarta.apache.org>
>>>
>>>
>>>
>>>
>>>
>>>--
>>>To unsubscribe, e-mail:
>>><ma...@jakarta.apache.org> For additional
>>>commands, e-mail: <ma...@jakarta.apache.org>
>>>
>>
>>--
>>Wei He, Ph.D.
>>Email: weihe@optonline.net
>>Voice: (845)359-5621
>>Fax: (845)359-1631
>>
>>
>>--
>>To unsubscribe, e-mail:
>><ma...@jakarta.apache.org> For additional
>>commands, e-mail: <ma...@jakarta.apache.org>
>
>
>
>
>
> --
> To unsubscribe, e-mail: <ma...@jakarta.apache.org>
> For additional commands, e-mail: <ma...@jakarta.apache.org>
>
--
Wei He, Ph.D.
Email: weihe@optonline.net
Voice: (845)359-5621
Fax: (845)359-1631
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Eigen Technology Pty Ltd <mi...@eigentechnology.com>.
Thanks Wei,
I have corrected the </tr> part, it gives the same result.
Here is my schema file, I have modified it to A, B and C for the sake of
simplicity, it is actually:
<table name="INVOICEITEM">
<column name="ID" required="true" autoIncrement="true"
primaryKey="true" type="INTEGER"/>
<column name="INVOICEREF" size="10" type="INTEGER"/>
<column name="CUSTOMERREF" size="10" type="INTEGER"/>
<column name="QUANTITY" size="10" type="INTEGER"/>
<column name="PARTICULAR" size="50" type="VARCHAR"/>
<column name="UNITPRICE" type="FLOAT"/>
<column name="TAX" type="FLOAT"/>
<column name="AMOUNT" type="FLOAT"/>
<column name="COMMENT" type="LONGVARCHAR"/>
<foreign-key foreignTable="CUSTOMER">
<reference local="QUANTIT2" foreign="ID"/>
</foreign-key>
<foreign-key foreignTable="INVOICE">
<reference local="INVOICEREF" foreign="ID"/>
</foreign-key>
</table>
only Quantity worked, invoiceref, id, customerref, amount etc all failed
the expression test.
thanks
michael
>
> what is your schema look like? also, i noticed that you <tr> should be
> outside of inner #if #end block. this may cause problem in you displayed
> result as well. do a view source in you browser to see if the syntax is
> correct.
>
> >>> #foreach ($entry in $entries)
> >>> <tr>
> >>> #if($entry.A == 3)
> >>> #entryCell ($entry.Id)
> >>> #entryCell ($entry.A)
> >>> #entryCell ($entry.B)
> >>> #entryCell ($entry.C)
> >>> </tr>
> >>> #end
> >>> #end
> >>>
>
> Eigen Technology Pty Ltd wrote:
>> Thanks,
>>
>> I tried your method, but I got the same result, i.e B is working, A
>> and C do not work. I tried to swap A and B in the database, again,
>> only the new B worked, A still does not work. Help would appreciated.
>>
>> best wishes
>> michael
>>
>>
>>
>>
>>
>>>all of your A, B, and C are in fact Integer, the java Object, so try
>>>
>>>#if ($entry.A.intValue() == 3)
>>>....
>>>#end
>>>
>>>Eigen Technology Pty Ltd wrote:
>>>
>>>>Dear all,
>>>>
>>>>I have the following expression in one of my Velocity file:
>>>>
>>>> #foreach ($entry in $entries)
>>>> <tr>
>>>> #if($entry.A == 3)
>>>> #entryCell ($entry.Id)
>>>> #entryCell ($entry.A)
>>>> #entryCell ($entry.B)
>>>> #entryCell ($entry.C)
>>>> </tr>
>>>> #end
>>>> #end
>>>>
>>>>the comparison expression only works for $entry.B, neither $entry.A
>>>> nor $entry.C work, i.e. A and C return no result. All A, B and C are
>>>> int. I have tried to compare as number (3) and text ("3"), only
>>>> getting the same result. What is limiting the expression? Would
>>>> appreciate some hints.
>>>>
>>>>best wishes
>>>>michael
>>>>
>>>>
>>>>
>>>>
>>>>--
>>>>To unsubscribe, e-mail:
>>>><ma...@jakarta.apache.org> For additional
>>>> commands, e-mail: <ma...@jakarta.apache.org>
>>>>
>>>
>>>--
>>>To unsubscribe, e-mail:
>>><ma...@jakarta.apache.org> For additional
>>> commands, e-mail: <ma...@jakarta.apache.org>
>>
>>
>>
>>
>>
>> --
>> To unsubscribe, e-mail:
>> <ma...@jakarta.apache.org> For additional
>> commands, e-mail: <ma...@jakarta.apache.org>
>>
>
>
> --
> Wei He, Ph.D.
> Email: weihe@optonline.net
> Voice: (845)359-5621
> Fax: (845)359-1631
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org> For additional
> commands, e-mail: <ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Wei He <we...@ldeo.columbia.edu>.
what is your schema look like? also, i noticed that you <tr> should be
outside of inner #if #end block. this may cause problem in you displayed
result as well. do a view source in you browser to see if the syntax is
correct.
>>> #foreach ($entry in $entries)
>>> <tr>
>>> #if($entry.A == 3)
>>> #entryCell ($entry.Id)
>>> #entryCell ($entry.A)
>>> #entryCell ($entry.B)
>>> #entryCell ($entry.C)
>>> </tr>
>>> #end
>>> #end
>>>
Eigen Technology Pty Ltd wrote:
> Thanks,
>
> I tried your method, but I got the same result, i.e B is working, A and C
> do not work. I tried to swap A and B in the database, again, only the new
> B worked, A still does not work. Help would appreciated.
>
> best wishes
> michael
>
>
>
>
>
>>all of your A, B, and C are in fact Integer, the java Object, so
>>try
>>
>>#if ($entry.A.intValue() == 3)
>>....
>>#end
>>
>>Eigen Technology Pty Ltd wrote:
>>
>>>Dear all,
>>>
>>>I have the following expression in one of my Velocity file:
>>>
>>> #foreach ($entry in $entries)
>>> <tr>
>>> #if($entry.A == 3)
>>> #entryCell ($entry.Id)
>>> #entryCell ($entry.A)
>>> #entryCell ($entry.B)
>>> #entryCell ($entry.C)
>>> </tr>
>>> #end
>>> #end
>>>
>>>the comparison expression only works for $entry.B, neither $entry.A
>>>nor $entry.C work, i.e. A and C return no result. All A, B and C are
>>>int. I have tried to compare as number (3) and text ("3"), only
>>>getting the same result. What is limiting the expression? Would
>>>appreciate some hints.
>>>
>>>best wishes
>>>michael
>>>
>>>
>>>
>>>
>>>--
>>>To unsubscribe, e-mail:
>>><ma...@jakarta.apache.org> For additional
>>>commands, e-mail: <ma...@jakarta.apache.org>
>>>
>>
>>--
>>To unsubscribe, e-mail:
>><ma...@jakarta.apache.org> For additional
>>commands, e-mail: <ma...@jakarta.apache.org>
>
>
>
>
>
> --
> To unsubscribe, e-mail: <ma...@jakarta.apache.org>
> For additional commands, e-mail: <ma...@jakarta.apache.org>
>
--
Wei He, Ph.D.
Email: weihe@optonline.net
Voice: (845)359-5621
Fax: (845)359-1631
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Eigen Technology Pty Ltd <mi...@eigentechnology.com>.
Thanks,
I tried your method, but I got the same result, i.e B is working, A and C
do not work. I tried to swap A and B in the database, again, only the new
B worked, A still does not work. Help would appreciated.
best wishes
michael
> all of your A, B, and C are in fact Integer, the java Object, so
> try
>
> #if ($entry.A.intValue() == 3)
> ....
> #end
>
> Eigen Technology Pty Ltd wrote:
>> Dear all,
>>
>> I have the following expression in one of my Velocity file:
>>
>> #foreach ($entry in $entries)
>> <tr>
>> #if($entry.A == 3)
>> #entryCell ($entry.Id)
>> #entryCell ($entry.A)
>> #entryCell ($entry.B)
>> #entryCell ($entry.C)
>> </tr>
>> #end
>> #end
>>
>> the comparison expression only works for $entry.B, neither $entry.A
>> nor $entry.C work, i.e. A and C return no result. All A, B and C are
>> int. I have tried to compare as number (3) and text ("3"), only
>> getting the same result. What is limiting the expression? Would
>> appreciate some hints.
>>
>> best wishes
>> michael
>>
>>
>>
>>
>> --
>> To unsubscribe, e-mail:
>> <ma...@jakarta.apache.org> For additional
>> commands, e-mail: <ma...@jakarta.apache.org>
>>
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org> For additional
> commands, e-mail: <ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Velocity Expression
Posted by Wei He <we...@ldeo.columbia.edu>.
all of your A, B, and C are in fact Integer, the java Object, so
try
#if ($entry.A.intValue() == 3)
....
#end
Eigen Technology Pty Ltd wrote:
> Dear all,
>
> I have the following expression in one of my Velocity file:
>
> #foreach ($entry in $entries)
> <tr>
> #if($entry.A == 3)
> #entryCell ($entry.Id)
> #entryCell ($entry.A)
> #entryCell ($entry.B)
> #entryCell ($entry.C)
> </tr>
> #end
> #end
>
> the comparison expression only works for $entry.B, neither $entry.A nor
> $entry.C work, i.e. A and C return no result. All A, B and C are int. I
> have tried to compare as number (3) and text ("3"), only getting the same
> result. What is limiting the expression? Would appreciate some hints.
>
> best wishes
> michael
>
>
>
>
> --
> To unsubscribe, e-mail: <ma...@jakarta.apache.org>
> For additional commands, e-mail: <ma...@jakarta.apache.org>
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Velocity Expression
Posted by Eigen Technology Pty Ltd <mi...@eigentechnology.com>.
Dear all,
I have the following expression in one of my Velocity file:
#foreach ($entry in $entries)
<tr>
#if($entry.A == 3)
#entryCell ($entry.Id)
#entryCell ($entry.A)
#entryCell ($entry.B)
#entryCell ($entry.C)
</tr>
#end
#end
the comparison expression only works for $entry.B, neither $entry.A nor
$entry.C work, i.e. A and C return no result. All A, B and C are int. I
have tried to compare as number (3) and text ("3"), only getting the same
result. What is limiting the expression? Would appreciate some hints.
best wishes
michael
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: AW: more patches to Extending User update (was AW: Documentation update)
Posted by Rodney Schneider <ro...@actf.com.au>.
On Mon, 16 Dec 2002 12:31, you wrote:
> I tried with defaultJavaType="object".
> It works except for type tinyint. Torque generates things like Byte
> xx = new Byte(0); which does not work as Byte doesn't have a
> constructor for int. These columns need to be specified as
> javaType="primitive", e.g. <column name="GLOBAL_AVAILABILITY"
> type="TINYINT" size="1" default="0" javaType="primitive"/>
>
> I use mysql which has no support for boolean, so I simulate this
> using tinyint 1.
> It would be cool if Torque would allow a mapping to boolean.
Hi Marc,
See this post:
http://archives.apache.org/eyebrowse/ReadMsg?listName=turbine-torque-dev@jakarta.apache.org&msgNo=2162
If this fixes your problem, could you submit a patch to Scarab?
Thanks,
-- Rodney
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: more patches to Extending User update (was AW: Documentation update)
Posted by Quinton McCombs <qm...@nequalsone.com>.
Torque has booleanchar and booleanint. It does not generate the code
correctly for either one though. I created a defect issue in scarab for
it and submitted a patch. So far one one of the two file that need to
be patched have been.
> -----Original Message-----
> From: Marc Lustig [mailto:mail@marclustig.com]
> Sent: Sunday, December 15, 2002 7:31 PM
> To: Turbine Users List
> Subject: AW: more patches to Extending User update (was AW:
> Documentation update)
>
>
> > > That's interesting to know. What is the exact xml-syntax? Is it
> > > specified in the database-element like this? <database
> > > defaultJavaType="object"> Is it possible to specifiy this
> for each
> > > table individually? Probably this would cause trouble with
> > > TurbineUserAdapter.
> > >
> >
> > You are correct with the syntax. For the table it is
> > javaType="object". The code given in the how-to is based on using
> > defaultJavaType="object" for your project. The implementation of
> > TurbineUser in the o.a.t.om.security package is using primatives.
>
> I tried with defaultJavaType="object".
> It works except for type tinyint. Torque generates things
> like Byte xx = new Byte(0); which does not work as Byte
> doesn't have a constructor for int. These columns need to be
> specified as javaType="primitive", e.g. <column
> name="GLOBAL_AVAILABILITY" type="TINYINT" size="1"
> default="0" javaType="primitive"/>
>
> I use mysql which has no support for boolean, so I simulate
> this using tinyint 1. It would be cool if Torque would allow
> a mapping to boolean.
>
>
> Marc
>
>
> --
> To unsubscribe, e-mail:
> <mailto:turbine-user-> unsubscribe@jakarta.apache.org>
> For
> additional commands,
> e-mail: <ma...@jakarta.apache.org>
>
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
AW: more patches to Extending User update (was AW: Documentation update)
Posted by Marc Lustig <ma...@marclustig.com>.
> > That's interesting to know. What is the exact xml-syntax?
> > Is it specified in the database-element like this?
> > <database defaultJavaType="object">
> > Is it possible to specifiy this for each table individually?
> > Probably this would cause trouble with TurbineUserAdapter.
> >
>
> You are correct with the syntax. For the table it is javaType="object".
> The code given in the how-to is based on using defaultJavaType="object"
> for your project. The implementation of TurbineUser in the
> o.a.t.om.security package is using primatives.
I tried with defaultJavaType="object".
It works except for type tinyint. Torque generates things like Byte xx = new
Byte(0); which does not work as Byte doesn't have a constructor for int.
These columns need to be specified as javaType="primitive", e.g.
<column name="GLOBAL_AVAILABILITY" type="TINYINT" size="1" default="0"
javaType="primitive"/>
I use mysql which has no support for boolean, so I simulate this using
tinyint 1.
It would be cool if Torque would allow a mapping to boolean.
Marc
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: more patches to Extending User update (was AW: Documentation update)
Posted by Quinton McCombs <qm...@nequalsone.com>.
> -----Original Message-----
> From: Marc Lustig [mailto:mail@marclustig.com]
> Sent: Sunday, December 15, 2002 3:47 PM
> To: Turbine Users List
> Subject: AW: more patches to Extending User update (was AW:
> Documentation update)
>
>
<snip>
> > > since the Base* classes expect int values, not Integer.
> >
> > This is caused by the javaType of you extended user table
> definition.
> > I set the defaultJavaType in my database tag to "object".
> I think you
> > are using "primitive" which is the default. I use the
> other setting
> > simply because it is impossible to have a field defined as
> an int with
> > a null value. The same is true for other data types as well.
>
> That's interesting to know. What is the exact xml-syntax?
> Is it specified in the database-element like this?
> <database defaultJavaType="object">
> Is it possible to specifiy this for each table individually?
> Probably this would cause trouble with TurbineUserAdapter.
>
You are correct with the syntax. For the table it is javaType="object".
The code given in the how-to is based on using defaultJavaType="object"
for your project. The implementation of TurbineUser in the
o.a.t.om.security package is using primatives.
> Maybe I will try to change this in my project and get back to Integer.
>
>
> Marc
>
>
> --
> To unsubscribe, e-mail:
> <mailto:turbine-user-> unsubscribe@jakarta.apache.org>
> For
> additional commands,
> e-mail: <ma...@jakarta.apache.org>
>
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
AW: more patches to Extending User update (was AW: Documentation update)
Posted by Marc Lustig <ma...@marclustig.com>.
> > Hi Quinton,
> > it's good to understand finally that the Turbine* om-classes
> > are not needed at all. They don't need to be generated, as
> > Turbine uses the classes that come along with the
> > org.apache.turbine package. It's a miracle to me why the
> > turbine-schema.xml file has not been removed in the latest
> > Turbine-release, or at least put into a separate dir to make
> > clear it is not needed (or rather must not) to be generated
> > for a project.
>
> The turbine-schema.xml file, I think, is still used for the ant task to
> create you database for you. I probably need to figure out how to keep
Yeah, you are right. I forgot about that.
> Torque from generating objects from it but still allow it to be used to
> generate database schemas. I am assuming that you manually added the
> column to TURBINE_USER in the database as I did.
For now I didn't add any field to turbine_user. I need only the foreign key.
Rather maybe I will try later to delete some of the fields of turbine_user.
Btw, my table kunde is an extension of the user, and therefore has kunde_id
both as the foreign key to turbine_user and primary key.
> > Anyway, in order for the om-classes to compile I needed to
> > add the following changes to your patch:
> >
> > 1) TurbineUserAdapter.getUserId() must return int (not Integer)
> >
> > public int getUserId()
> > {
> > return ((NumberKey)getPrimaryKey()).intValue();
> > //NOT: return new
> > Integer(((NumberKey)getPrimaryKey()).intValue());
> > }
> >
> > since the Base* classes expect int values, not Integer.
>
> This is caused by the javaType of you extended user table definition. I
> set the defaultJavaType in my database tag to "object". I think you are
> using "primitive" which is the default. I use the other setting simply
> because it is impossible to have a field defined as an int with a null
> value. The same is true for other data types as well.
That's interesting to know. What is the exact xml-syntax?
Is it specified in the database-element like this?
<database defaultJavaType="object">
Is it possible to specifiy this for each table individually? Probably this
would cause trouble with TurbineUserAdapter.
Maybe I will try to change this in my project and get back to Integer.
Marc
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: more patches to Extending User update (was AW: Documentation update)
Posted by Quinton McCombs <qm...@nequalsone.com>.
> -----Original Message-----
> From: Marc Lustig [mailto:mail@marclustig.com]
> Sent: Sunday, December 15, 2002 9:10 AM
> To: Turbine Users List
> Subject: more patches to Extending User update (was AW:
> Documentation update)
>
>
> Hi Quinton,
> it's good to understand finally that the Turbine* om-classes
> are not needed at all. They don't need to be generated, as
> Turbine uses the classes that come along with the
> org.apache.turbine package. It's a miracle to me why the
> turbine-schema.xml file has not been removed in the latest
> Turbine-release, or at least put into a separate dir to make
> clear it is not needed (or rather must not) to be generated
> for a project.
The turbine-schema.xml file, I think, is still used for the ant task to
create you database for you. I probably need to figure out how to keep
Torque from generating objects from it but still allow it to be used to
generate database schemas. I am assuming that you manually added the
column to TURBINE_USER in the database as I did.
>
> Anyway, in order for the om-classes to compile I needed to
> add the following changes to your patch:
>
> 1) TurbineUserAdapter.getUserId() must return int (not Integer)
>
> public int getUserId()
> {
> return ((NumberKey)getPrimaryKey()).intValue();
> //NOT: return new
> Integer(((NumberKey)getPrimaryKey()).intValue());
> }
>
> since the Base* classes expect int values, not Integer.
This is caused by the javaType of you extended user table definition. I
set the defaultJavaType in my database tag to "object". I think you are
using "primitive" which is the default. I use the other setting simply
because it is impossible to have a field defined as an int with a null
value. The same is true for other data types as well.
I will point out this possible variation in my how-to.
>
> 2) TurbineUserAdapter needs to implements method setPrimaryKey:
>
> public void setPrimaryKey(String key) {
> try {
> super.setPrimaryKey(key);
> }
> catch (Exception ex) {
> }
>
> since
> org.apache.torque.om.BaseObject:
> public void setPrimaryKey(java.lang.String primaryKey)
> throws java.lang.Exception
> ^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> This relates to the fact that Torque is still evolving
> whereas the Turbine Security System
> (org.apache.turbine.om.security.*) seems at stand still.
Thanks. I will look into this one.
>
> I will check tomorrow if this solution will work as it is
> supposed to do.
>
Please let me know how it works for you.
> Greetings
> Marc
>
>
> > -----Ursprungliche Nachricht-----
> > Von: Quinton McCombs [mailto:qmccombs@nequalsone.com]
> > Gesendet: Sonntag, 15. Dezember 2002 02:37
> > An: 'Turbine Users List'
> > Betreff: RE: Documentation update
> >
> >
> > Ahh... You need to rename turbine-schema.xml to
> > turbine-schema.xml.nogenerate (or anything besides *-schema.xml).
> > Next, delete all of the om.Turbine*, om.BaseTurbine*,
> om.map.Turbine*
> > classes that were generated. These classes are not used.
> They only
> > make things more confusing.
> >
> > Now, your schema file.... You should not list TURBINE_USER
> as a table
> > in your schema file. Instead, use AUDIOTEX_USER with an alias of
> > TurbineUser. This will cause AudiotexUser,
> AudiotexUserPeer, and the
> > associated Base* classes to be generated. The Base* classes will
> > extend the adapters TurbineUserAdpater and TurbineUserPeerAdpaters,
> > respectively. Foreign key references in your schema file
> should use
> > the table name AUDIOTEX_USER.
> >
> > I have made the appropriate changes to your schema file below.
> >
> >
> > <table name="AUDIOTEX_USER" alias="TurbineUser"
> > baseClass="de.geoconnect.audiotex.om.TurbineUserAdapter"
> > basePeer="de.geoconnect.audiotex.om.TurbineUserPeerAdapter">
> > <column name="USER_ID" primaryKey="true"
> required="true"
> > type="INTEGER"/>
> > </table>
> > <table name="KUNDE">
> > <column name="KUNDE_ID" primaryKey="true"
> > required="true" type="INTEGER"/>
> > <foreign-key foreignTable="AUDIOTEX_USER">
> > <reference local="KUNDE_ID" foreign="USER_ID"/>
> > </foreign-key>
> > </table>
> >
> > This should get the om.* classes generating correctly for you. On
> > thing that I noticed is that the primary key of your KUNDE table is
> > also the foreign key to AUDIOTEX_USER. Was this your
> intent? Perhaps
> > you really just wanted to add a USER_ID column in the KUNDE
> table. If
> > so, change the definition of the KUNDE table as follows.
> >
> > <table name="KUNDE">
> > <column name="KUNDE_ID" primaryKey="true"
> > required="true" type="INTEGER"/>
> > <column name="USER_ID" required="true" type="INTEGER"/>
> > <foreign-key foreignTable="AUDIOTEX_USER">
> > <reference local="USER_ID" foreign="USER_ID"/>
> > </foreign-key>
> > </table>
> >
> > After making those changes, run the project-om task again. The only
> > Turbine* or BaseTurbine* classes that you should have in your om
> > package are TurbineUserAdapter and TurbineUserPeerAdapter.
> You should
> > not have any Turbine* classes in the om.map package.
> >
> >
> > Just FYI, here is the exact syntax from my schema file.
> The name of
> > my extend turbine user class is called NeoUser. I added
> clientId as a
> > column in TURBINE_USER.
> >
> > <table name="NEO_USER" alias="TurbineUser"
> > baseClass="com.nequalsone.om.TurbineUserAdapter"
> > basePeer="com.nequalsone.om.TurbineUserPeerAdapter">
> > <column name="USER_ID" required="true" primaryKey="true"
> > type="INTEGER"/>
> > </table>
> > <table name="ADDRESS">
> > <column name="OBJECT_ID" primaryKey="true" required="true"
> > type="INTEGER"/>
> > <column name="LINE_1" size="40" type="VARCHAR"/>
> > <column name="LINE_2" size="30" type="VARCHAR"/>
> > <column name="CITY" size="30" type="VARCHAR"/>
> > <column name="STATE" size="2" type="VARCHAR"/>
> > <column name="ZIP_CODE" size="5" type="VARCHAR"/>
> > <column name="ZIP_PLUS_4" size="4" type="VARCHAR"/>
> > <column name="CLIENT_ID" required="true" type="INTEGER"/>
> > <foreign-key foreignTable="CLIENT">
> > <reference foreign="OBJECT_ID" local="CLIENT_ID"/>
> > </foreign-key>
> > </table>
> >
> > Please let me know if this helps.
> >
> >
> > -----Original Message-----
> > From: Marc Lustig [mailto:mail@marclustig.com]
> > Sent: Saturday, December 14, 2002 4:02 PM
> > To: Turbine Users List
> > Subject: AW: Documentation update
> >
> >
> > Thanks, Quinton, that helped.
> > However there is another problem: torque generates two
> classes in all
> > of these files:
> >
> > BaseTurbineUser.java
> > BaseTurbineUserPeer.java
> > BaseTurbineUserManager.java
> >
> > For example, BaseTurbineUser.java contains both of these classes
> >
> > public abstract class BaseTurbineUser extends
> > de.geoconnect.audiotex.om.TurbineUserAdapter
> > implements org.apache.turbine.om.Retrievable
> > and
> > public abstract class BaseTurbineUser extends BaseObject
> > implements org.apache.turbine.om.Retrievable
> >
> > Apparently what happens is that Torque generates object TurbineUser
> > two times, first time from turbine-schema.xml, and second time from
> > project-schema.xml.
> >
> >
> > How did you got around this?
> >
> > My schema looks like this:
> >
> > <table name="TURBINE_USER" alias="AudiotexUser"
> > baseClass="de.geoconnect.audiotex.om.TurbineUserAdapter"
> > basePeer="de.geoconnect.audiotex.om.TurbineUserPeerAdapter">
> > <column name="USER_ID" primaryKey="true"
> required="true"
> > type="INTEGER"/>
> > </table>
> > <table name="KUNDE">
> > <column name="KUNDE_ID" primaryKey="true"
> > required="true" type="INTEGER"/>
> > <foreign-key foreignTable="TURBINE_USER">
> > <reference local="KUNDE_ID" foreign="USER_ID"/>
> > </foreign-key>
> > </table>
> >
> >
> > Marc
> >
> >
> >
> > > -----Ursprungliche Nachricht-----
> > > Von: Quinton McCombs [mailto:qmccombs@nequalsone.com]
> > > Gesendet: Samstag, 14. Dezember 2002 22:25
> > > An: 'Turbine Users List'
> > > Betreff: RE: Documentation update
> > >
> > >
> > > My applogies. It should have been getTitle(). This is the
> > > attribute that, in the example, we are adding to Turbine User.
> > > Sorry, I guess that was another reference that I over looked when
> > > converted the code that I am using into the example.
> > >
> > > -----Original Message-----
> > > From: Marc Lustig [mailto:mail@marclustig.com]
> > > Sent: Saturday, December 14, 2002 2:16 PM
> > > To: Turbine Users List
> > > Subject: AW: Documentation update
> > >
> > >
> > > Quinton, I tried out your Extend-User howto. I'm running into
> > > various problems, but first of all: you have this method in your
> > > TurbineMapBuilderAdapter
> > >
> > > public void doBuild() throws java.lang.Exception
> > > {
> > > super.doBuild();
> > >
> > > // Make dummy object - required for adding a
> column to the map
> > > Integer integer = new Integer(0);
> > >
> > > // Add extra User columns.
> > > TableMap tMap =
> > > Torque.getDatabaseMap().getTable(getTableUser());
> > > tMap.addColumn(getClientId(),integer);
> > > ^^^^^^^^^^^^
> > > }
> > >
> > > Problem is there is no method getCliendId() neither in
> > > TurbineMapBuilderAdapter nor in
> > > org.apache.turbine.util.db.map.TurbineMapBuilder.
> > >
> > > Could you please let me know how you implemented this method ?
> > > Thanks!
> > >
> > > Once, this is fixed all the other compilations errors might fade
> > > away.
> > >
> > > Marc
> > >
> > >
> > > --
> > > To unsubscribe, e-mail:
> > > <ma...@jakarta.apache.org>
> > > For additional commands, e-mail:
> > > <ma...@jakarta.apache.org>
> > >
> > >
> > >
> > > --
> > > To unsubscribe, e-mail:
> > <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> > <ma...@jakarta.apache.org>
> >
> >
> > --
> > To unsubscribe, e-mail:
> > <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> > <ma...@jakarta.apache.org>
> >
> >
> >
> > --
> > To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
>
> --
> To
> unsubscribe, e-mail:
> <mailto:turbine-user-> unsubscribe@jakarta.apache.org>
> For
> additional commands,
> e-mail: <ma...@jakarta.apache.org>
>
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
more patches to Extending User update (was AW: Documentation update)
Posted by Marc Lustig <ma...@marclustig.com>.
Hi Quinton,
it's good to understand finally that the Turbine* om-classes are not needed
at all.
They don't need to be generated, as Turbine uses the classes that come along
with the org.apache.turbine package.
It's a miracle to me why the turbine-schema.xml file has not been removed in
the latest Turbine-release, or at least put into a separate dir to make
clear it is not needed (or rather must not) to be generated for a project.
Anyway, in order for the om-classes to compile I needed to add the following
changes to your patch:
1) TurbineUserAdapter.getUserId() must return int (not Integer)
public int getUserId()
{
return ((NumberKey)getPrimaryKey()).intValue();
//NOT: return new Integer(((NumberKey)getPrimaryKey()).intValue());
}
since the Base* classes expect int values, not Integer.
2) TurbineUserAdapter needs to implements method setPrimaryKey:
public void setPrimaryKey(String key) {
try {
super.setPrimaryKey(key);
}
catch (Exception ex) {
}
since
org.apache.torque.om.BaseObject:
public void setPrimaryKey(java.lang.String primaryKey)
throws java.lang.Exception
^^^^^^^^^^^^^^^^^^^^^^^^^^
This relates to the fact that Torque is still evolving whereas the Turbine
Security System (org.apache.turbine.om.security.*) seems at stand still.
I will check tomorrow if this solution will work as it is supposed to do.
Greetings
Marc
> -----Ursprungliche Nachricht-----
> Von: Quinton McCombs [mailto:qmccombs@nequalsone.com]
> Gesendet: Sonntag, 15. Dezember 2002 02:37
> An: 'Turbine Users List'
> Betreff: RE: Documentation update
>
>
> Ahh... You need to rename turbine-schema.xml to
> turbine-schema.xml.nogenerate (or anything besides *-schema.xml). Next,
> delete all of the om.Turbine*, om.BaseTurbine*, om.map.Turbine* classes
> that were generated. These classes are not used. They only make things
> more confusing.
>
> Now, your schema file.... You should not list TURBINE_USER as a table
> in your schema file. Instead, use AUDIOTEX_USER with an alias of
> TurbineUser. This will cause AudiotexUser, AudiotexUserPeer, and the
> associated Base* classes to be generated. The Base* classes will extend
> the adapters TurbineUserAdpater and TurbineUserPeerAdpaters,
> respectively. Foreign key references in your schema file should use the
> table name AUDIOTEX_USER.
>
> I have made the appropriate changes to your schema file below.
>
>
> <table name="AUDIOTEX_USER" alias="TurbineUser"
> baseClass="de.geoconnect.audiotex.om.TurbineUserAdapter"
> basePeer="de.geoconnect.audiotex.om.TurbineUserPeerAdapter">
> <column name="USER_ID" primaryKey="true" required="true"
> type="INTEGER"/>
> </table>
> <table name="KUNDE">
> <column name="KUNDE_ID" primaryKey="true"
> required="true" type="INTEGER"/>
> <foreign-key foreignTable="AUDIOTEX_USER">
> <reference local="KUNDE_ID" foreign="USER_ID"/>
> </foreign-key>
> </table>
>
> This should get the om.* classes generating correctly for you. On thing
> that I noticed is that the primary key of your KUNDE table is also the
> foreign key to AUDIOTEX_USER. Was this your intent? Perhaps you really
> just wanted to add a USER_ID column in the KUNDE table. If so, change
> the definition of the KUNDE table as follows.
>
> <table name="KUNDE">
> <column name="KUNDE_ID" primaryKey="true"
> required="true" type="INTEGER"/>
> <column name="USER_ID" required="true" type="INTEGER"/>
> <foreign-key foreignTable="AUDIOTEX_USER">
> <reference local="USER_ID" foreign="USER_ID"/>
> </foreign-key>
> </table>
>
> After making those changes, run the project-om task again. The only
> Turbine* or BaseTurbine* classes that you should have in your om package
> are TurbineUserAdapter and TurbineUserPeerAdapter. You should not have
> any Turbine* classes in the om.map package.
>
>
> Just FYI, here is the exact syntax from my schema file. The name of my
> extend turbine user class is called NeoUser. I added clientId as a
> column in TURBINE_USER.
>
> <table name="NEO_USER" alias="TurbineUser"
> baseClass="com.nequalsone.om.TurbineUserAdapter"
> basePeer="com.nequalsone.om.TurbineUserPeerAdapter">
> <column name="USER_ID" required="true" primaryKey="true"
> type="INTEGER"/>
> </table>
> <table name="ADDRESS">
> <column name="OBJECT_ID" primaryKey="true" required="true"
> type="INTEGER"/>
> <column name="LINE_1" size="40" type="VARCHAR"/>
> <column name="LINE_2" size="30" type="VARCHAR"/>
> <column name="CITY" size="30" type="VARCHAR"/>
> <column name="STATE" size="2" type="VARCHAR"/>
> <column name="ZIP_CODE" size="5" type="VARCHAR"/>
> <column name="ZIP_PLUS_4" size="4" type="VARCHAR"/>
> <column name="CLIENT_ID" required="true" type="INTEGER"/>
> <foreign-key foreignTable="CLIENT">
> <reference foreign="OBJECT_ID" local="CLIENT_ID"/>
> </foreign-key>
> </table>
>
> Please let me know if this helps.
>
>
> -----Original Message-----
> From: Marc Lustig [mailto:mail@marclustig.com]
> Sent: Saturday, December 14, 2002 4:02 PM
> To: Turbine Users List
> Subject: AW: Documentation update
>
>
> Thanks, Quinton, that helped.
> However there is another problem: torque generates two classes in all of
> these files:
>
> BaseTurbineUser.java
> BaseTurbineUserPeer.java
> BaseTurbineUserManager.java
>
> For example, BaseTurbineUser.java contains both of these classes
>
> public abstract class BaseTurbineUser extends
> de.geoconnect.audiotex.om.TurbineUserAdapter
> implements org.apache.turbine.om.Retrievable
> and
> public abstract class BaseTurbineUser extends BaseObject
> implements org.apache.turbine.om.Retrievable
>
> Apparently what happens is that Torque generates object TurbineUser two
> times, first time from turbine-schema.xml, and second time from
> project-schema.xml.
>
>
> How did you got around this?
>
> My schema looks like this:
>
> <table name="TURBINE_USER" alias="AudiotexUser"
> baseClass="de.geoconnect.audiotex.om.TurbineUserAdapter"
> basePeer="de.geoconnect.audiotex.om.TurbineUserPeerAdapter">
> <column name="USER_ID" primaryKey="true" required="true"
> type="INTEGER"/>
> </table>
> <table name="KUNDE">
> <column name="KUNDE_ID" primaryKey="true"
> required="true" type="INTEGER"/>
> <foreign-key foreignTable="TURBINE_USER">
> <reference local="KUNDE_ID" foreign="USER_ID"/>
> </foreign-key>
> </table>
>
>
> Marc
>
>
>
> > -----Ursprungliche Nachricht-----
> > Von: Quinton McCombs [mailto:qmccombs@nequalsone.com]
> > Gesendet: Samstag, 14. Dezember 2002 22:25
> > An: 'Turbine Users List'
> > Betreff: RE: Documentation update
> >
> >
> > My applogies. It should have been getTitle(). This is the attribute
> > that, in the example, we are adding to Turbine User. Sorry, I guess
> > that was another reference that I over looked when converted the code
> > that I am using into the example.
> >
> > -----Original Message-----
> > From: Marc Lustig [mailto:mail@marclustig.com]
> > Sent: Saturday, December 14, 2002 2:16 PM
> > To: Turbine Users List
> > Subject: AW: Documentation update
> >
> >
> > Quinton, I tried out your Extend-User howto. I'm running into various
> > problems, but first of all: you have this method in your
> > TurbineMapBuilderAdapter
> >
> > public void doBuild() throws java.lang.Exception
> > {
> > super.doBuild();
> >
> > // Make dummy object - required for adding a column to the map
> > Integer integer = new Integer(0);
> >
> > // Add extra User columns.
> > TableMap tMap =
> > Torque.getDatabaseMap().getTable(getTableUser());
> > tMap.addColumn(getClientId(),integer);
> > ^^^^^^^^^^^^
> > }
> >
> > Problem is there is no method getCliendId() neither in
> > TurbineMapBuilderAdapter nor in
> > org.apache.turbine.util.db.map.TurbineMapBuilder.
> >
> > Could you please let me know how you implemented this method ? Thanks!
> >
> > Once, this is fixed all the other compilations errors might fade away.
> >
> > Marc
> >
> >
> > --
> > To unsubscribe, e-mail:
> > <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> > <ma...@jakarta.apache.org>
> >
> >
> >
> > --
> > To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
>
>
> --
> To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Documentation update
Posted by Quinton McCombs <qm...@nequalsone.com>.
Ahh... You need to rename turbine-schema.xml to
turbine-schema.xml.nogenerate (or anything besides *-schema.xml). Next,
delete all of the om.Turbine*, om.BaseTurbine*, om.map.Turbine* classes
that were generated. These classes are not used. They only make things
more confusing.
Now, your schema file.... You should not list TURBINE_USER as a table
in your schema file. Instead, use AUDIOTEX_USER with an alias of
TurbineUser. This will cause AudiotexUser, AudiotexUserPeer, and the
associated Base* classes to be generated. The Base* classes will extend
the adapters TurbineUserAdpater and TurbineUserPeerAdpaters,
respectively. Foreign key references in your schema file should use the
table name AUDIOTEX_USER.
I have made the appropriate changes to your schema file below.
<table name="AUDIOTEX_USER" alias="TurbineUser"
baseClass="de.geoconnect.audiotex.om.TurbineUserAdapter"
basePeer="de.geoconnect.audiotex.om.TurbineUserPeerAdapter">
<column name="USER_ID" primaryKey="true" required="true"
type="INTEGER"/>
</table>
<table name="KUNDE">
<column name="KUNDE_ID" primaryKey="true"
required="true" type="INTEGER"/>
<foreign-key foreignTable="AUDIOTEX_USER">
<reference local="KUNDE_ID" foreign="USER_ID"/>
</foreign-key>
</table>
This should get the om.* classes generating correctly for you. On thing
that I noticed is that the primary key of your KUNDE table is also the
foreign key to AUDIOTEX_USER. Was this your intent? Perhaps you really
just wanted to add a USER_ID column in the KUNDE table. If so, change
the definition of the KUNDE table as follows.
<table name="KUNDE">
<column name="KUNDE_ID" primaryKey="true"
required="true" type="INTEGER"/>
<column name="USER_ID" required="true" type="INTEGER"/>
<foreign-key foreignTable="AUDIOTEX_USER">
<reference local="USER_ID" foreign="USER_ID"/>
</foreign-key>
</table>
After making those changes, run the project-om task again. The only
Turbine* or BaseTurbine* classes that you should have in your om package
are TurbineUserAdapter and TurbineUserPeerAdapter. You should not have
any Turbine* classes in the om.map package.
Just FYI, here is the exact syntax from my schema file. The name of my
extend turbine user class is called NeoUser. I added clientId as a
column in TURBINE_USER.
<table name="NEO_USER" alias="TurbineUser"
baseClass="com.nequalsone.om.TurbineUserAdapter"
basePeer="com.nequalsone.om.TurbineUserPeerAdapter">
<column name="USER_ID" required="true" primaryKey="true"
type="INTEGER"/>
</table>
<table name="ADDRESS">
<column name="OBJECT_ID" primaryKey="true" required="true"
type="INTEGER"/>
<column name="LINE_1" size="40" type="VARCHAR"/>
<column name="LINE_2" size="30" type="VARCHAR"/>
<column name="CITY" size="30" type="VARCHAR"/>
<column name="STATE" size="2" type="VARCHAR"/>
<column name="ZIP_CODE" size="5" type="VARCHAR"/>
<column name="ZIP_PLUS_4" size="4" type="VARCHAR"/>
<column name="CLIENT_ID" required="true" type="INTEGER"/>
<foreign-key foreignTable="CLIENT">
<reference foreign="OBJECT_ID" local="CLIENT_ID"/>
</foreign-key>
</table>
Please let me know if this helps.
-----Original Message-----
From: Marc Lustig [mailto:mail@marclustig.com]
Sent: Saturday, December 14, 2002 4:02 PM
To: Turbine Users List
Subject: AW: Documentation update
Thanks, Quinton, that helped.
However there is another problem: torque generates two classes in all of
these files:
BaseTurbineUser.java
BaseTurbineUserPeer.java
BaseTurbineUserManager.java
For example, BaseTurbineUser.java contains both of these classes
public abstract class BaseTurbineUser extends
de.geoconnect.audiotex.om.TurbineUserAdapter
implements org.apache.turbine.om.Retrievable
and
public abstract class BaseTurbineUser extends BaseObject
implements org.apache.turbine.om.Retrievable
Apparently what happens is that Torque generates object TurbineUser two
times, first time from turbine-schema.xml, and second time from
project-schema.xml.
How did you got around this?
My schema looks like this:
<table name="TURBINE_USER" alias="AudiotexUser"
baseClass="de.geoconnect.audiotex.om.TurbineUserAdapter"
basePeer="de.geoconnect.audiotex.om.TurbineUserPeerAdapter">
<column name="USER_ID" primaryKey="true" required="true"
type="INTEGER"/>
</table>
<table name="KUNDE">
<column name="KUNDE_ID" primaryKey="true"
required="true" type="INTEGER"/>
<foreign-key foreignTable="TURBINE_USER">
<reference local="KUNDE_ID" foreign="USER_ID"/>
</foreign-key>
</table>
Marc
> -----Ursprungliche Nachricht-----
> Von: Quinton McCombs [mailto:qmccombs@nequalsone.com]
> Gesendet: Samstag, 14. Dezember 2002 22:25
> An: 'Turbine Users List'
> Betreff: RE: Documentation update
>
>
> My applogies. It should have been getTitle(). This is the attribute
> that, in the example, we are adding to Turbine User. Sorry, I guess
> that was another reference that I over looked when converted the code
> that I am using into the example.
>
> -----Original Message-----
> From: Marc Lustig [mailto:mail@marclustig.com]
> Sent: Saturday, December 14, 2002 2:16 PM
> To: Turbine Users List
> Subject: AW: Documentation update
>
>
> Quinton, I tried out your Extend-User howto. I'm running into various
> problems, but first of all: you have this method in your
> TurbineMapBuilderAdapter
>
> public void doBuild() throws java.lang.Exception
> {
> super.doBuild();
>
> // Make dummy object - required for adding a column to the map
> Integer integer = new Integer(0);
>
> // Add extra User columns.
> TableMap tMap =
> Torque.getDatabaseMap().getTable(getTableUser());
> tMap.addColumn(getClientId(),integer);
> ^^^^^^^^^^^^
> }
>
> Problem is there is no method getCliendId() neither in
> TurbineMapBuilderAdapter nor in
> org.apache.turbine.util.db.map.TurbineMapBuilder.
>
> Could you please let me know how you implemented this method ? Thanks!
>
> Once, this is fixed all the other compilations errors might fade away.
>
> Marc
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
>
>
> --
> To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
AW: Documentation update
Posted by Marc Lustig <ma...@marclustig.com>.
Thanks, Quinton, that helped.
However there is another problem: torque generates two classes in all of
these files:
BaseTurbineUser.java
BaseTurbineUserPeer.java
BaseTurbineUserManager.java
For example, BaseTurbineUser.java contains both of these classes
public abstract class BaseTurbineUser extends
de.geoconnect.audiotex.om.TurbineUserAdapter
implements org.apache.turbine.om.Retrievable
and
public abstract class BaseTurbineUser extends BaseObject
implements org.apache.turbine.om.Retrievable
Apparently what happens is that Torque generates object TurbineUser two
times, first time from turbine-schema.xml, and second time from
project-schema.xml.
How did you got around this?
My schema looks like this:
<table name="TURBINE_USER" alias="AudiotexUser"
baseClass="de.geoconnect.audiotex.om.TurbineUserAdapter"
basePeer="de.geoconnect.audiotex.om.TurbineUserPeerAdapter">
<column name="USER_ID" primaryKey="true" required="true" type="INTEGER"/>
</table>
<table name="KUNDE">
<column name="KUNDE_ID" primaryKey="true" required="true" type="INTEGER"/>
<foreign-key foreignTable="TURBINE_USER">
<reference local="KUNDE_ID" foreign="USER_ID"/>
</foreign-key>
</table>
Marc
> -----Ursprungliche Nachricht-----
> Von: Quinton McCombs [mailto:qmccombs@nequalsone.com]
> Gesendet: Samstag, 14. Dezember 2002 22:25
> An: 'Turbine Users List'
> Betreff: RE: Documentation update
>
>
> My applogies. It should have been getTitle(). This is the attribute
> that, in the example, we are adding to Turbine User. Sorry, I guess
> that was another reference that I over looked when converted the code
> that I am using into the example.
>
> -----Original Message-----
> From: Marc Lustig [mailto:mail@marclustig.com]
> Sent: Saturday, December 14, 2002 2:16 PM
> To: Turbine Users List
> Subject: AW: Documentation update
>
>
> Quinton, I tried out your Extend-User howto. I'm running into various
> problems, but first of all: you have this method in your
> TurbineMapBuilderAdapter
>
> public void doBuild() throws java.lang.Exception
> {
> super.doBuild();
>
> // Make dummy object - required for adding a column to the map
> Integer integer = new Integer(0);
>
> // Add extra User columns.
> TableMap tMap =
> Torque.getDatabaseMap().getTable(getTableUser());
> tMap.addColumn(getClientId(),integer);
> ^^^^^^^^^^^^
> }
>
> Problem is there is no method getCliendId() neither in
> TurbineMapBuilderAdapter nor in
> org.apache.turbine.util.db.map.TurbineMapBuilder.
>
> Could you please let me know how you implemented this method ? Thanks!
>
> Once, this is fixed all the other compilations errors might fade away.
>
> Marc
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
>
>
> --
> To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Documentation update
Posted by Quinton McCombs <qm...@nequalsone.com>.
My applogies. It should have been getTitle(). This is the attribute
that, in the example, we are adding to Turbine User. Sorry, I guess
that was another reference that I over looked when converted the code
that I am using into the example.
-----Original Message-----
From: Marc Lustig [mailto:mail@marclustig.com]
Sent: Saturday, December 14, 2002 2:16 PM
To: Turbine Users List
Subject: AW: Documentation update
Quinton, I tried out your Extend-User howto. I'm running into various
problems, but first of all: you have this method in your
TurbineMapBuilderAdapter
public void doBuild() throws java.lang.Exception
{
super.doBuild();
// Make dummy object - required for adding a column to the map
Integer integer = new Integer(0);
// Add extra User columns.
TableMap tMap =
Torque.getDatabaseMap().getTable(getTableUser());
tMap.addColumn(getClientId(),integer);
^^^^^^^^^^^^
}
Problem is there is no method getCliendId() neither in
TurbineMapBuilderAdapter nor in
org.apache.turbine.util.db.map.TurbineMapBuilder.
Could you please let me know how you implemented this method ? Thanks!
Once, this is fixed all the other compilations errors might fade away.
Marc
--
To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
AW: Documentation update
Posted by Marc Lustig <ma...@marclustig.com>.
Quinton, I tried out your Extend-User howto. I'm running into various
problems, but first of all: you have this method in your
TurbineMapBuilderAdapter
public void doBuild() throws java.lang.Exception
{
super.doBuild();
// Make dummy object - required for adding a column to the map
Integer integer = new Integer(0);
// Add extra User columns.
TableMap tMap = Torque.getDatabaseMap().getTable(getTableUser());
tMap.addColumn(getClientId(),integer);
^^^^^^^^^^^^
}
Problem is there is no method getCliendId() neither in
TurbineMapBuilderAdapter nor in
org.apache.turbine.util.db.map.TurbineMapBuilder.
Could you please let me know how you implemented this method ?
Thanks!
Once, this is fixed all the other compilations errors might fade away.
Marc
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Documentation update
Posted by Quinton McCombs <qm...@nequalsone.com>.
Yes. This is how I extended TurbineUser in my application. I am using
T2.2 with Torque 3.0.
-----Original Message-----
From: Marc Lustig [mailto:mail@marclustig.com]
Sent: Saturday, December 14, 2002 10:25 AM
To: Turbine Users List
Subject: AW: Documentation update
Quinton,
the latest Torque seems to use now *Manager classes instead of the
*Adapter classes. Have you successfully run your Extend-User howto on
such a Torque-edition?
Marc
> -----Ursprungliche Nachricht-----
> Von: Quinton McCombs [mailto:quintonm@bellsouth.net]
> Gesendet: Freitag, 13. Dezember 2002 06:30
> An: Turbine Developers List; Turbine Users List
> Betreff: Documentation update
>
>
> I have created some documentation for migrating from 2.1 to 2.2 and
> updated the Extend User howto. I was hoping some of you could take a
> moment to look over what I have done and comment. I did the docs in
> xdoc format. The links below are to the generated HTML version.
> Depending on feedback, I will submit the patches and new files to the
> dev list in the next week.
>
> Migration: http://blaze.qdog.org/preview/howto/migration-from-2_1.html
>
> Extend User:
> http://blaze.qdog.org/preview/howto/extend-user-howto.html
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
--
To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
AW: Documentation update
Posted by Marc Lustig <ma...@marclustig.com>.
Quinton,
the latest Torque seems to use now *Manager classes instead of the *Adapter
classes.
Have you successfully run your Extend-User howto on such a Torque-edition?
Marc
> -----Ursprungliche Nachricht-----
> Von: Quinton McCombs [mailto:quintonm@bellsouth.net]
> Gesendet: Freitag, 13. Dezember 2002 06:30
> An: Turbine Developers List; Turbine Users List
> Betreff: Documentation update
>
>
> I have created some documentation for migrating from 2.1 to 2.2 and
> updated the Extend User howto. I was hoping some of you could take a
> moment to look over what I have done and comment. I did the docs in
> xdoc format. The links below are to the generated HTML version.
> Depending on feedback, I will submit the patches and new files to the
> dev list in the next week.
>
> Migration:
> http://blaze.qdog.org/preview/howto/migration-from-2_1.html
>
> Extend User:
> http://blaze.qdog.org/preview/howto/extend-user-howto.html
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Documentation update
Posted by Quinton McCombs <qm...@nequalsone.com>.
I updated the migration document to remove the comment about getTemp and
setTemp not being there any longer. I think that was from some old
notes that I had made when I was distracted by the Turbine* objects
generated by project-om.
I modified the extend user document to correct the syntax error and
coding convension issue that you pointed out. I also added a little
more information on using the setPerm/getPerm and setTemp/getTemp
methods.
Thank you for taking the time to look over the documents. If there is
anything else that need corrected or could be explained in more detail,
please let me know.
-----Original Message-----
From: Scott Eade [mailto:seade@backstagetech.com.au]
Sent: Friday, December 13, 2002 7:50 AM
To: turbine-dev
Subject: Re: Documentation update
> From: "Quinton McCombs" <qu...@bellsouth.net>
>
> I have created some documentation for migrating from 2.1 to 2.2 and
> updated the Extend User howto. I was hoping some of you could take a
> moment to look over what I have done and comment. I did the docs in
> xdoc format. The links below are to the generated HTML version.
> Depending on feedback, I will submit the patches and new files to the
> dev list in the next week.
>
> Migration: http://blaze.qdog.org/preview/howto/migration-from-2_1.html
While I cannot confirm the accuracy of the content (still trying to find
time to look at 2.2) I would query whether or not get/setTemp() are no
longer available in T2.2, did you perhaps mean get/setPerm()? Even
get/setPerm() appear to still be present, although these may just be the
mechanism used to store the concrete columns in the TURBINE_USER table
(i.e. the OBJECTDATA column that no longer exists). Looking at
turbine-schema.xml the OBJECTDATA column still seems to appear, but
TurbineUserPeer.buildCriteria() does not seem to populate it. I leave
it to you to check the detail.
>
> Extend User:
> http://blaze.qdog.org/preview/howto/extend-user-howto.html
I couldn't look at T2.2 without this, but again I cannot confirm the
accuracy of the content until I have time to try it. The document does
however make reference to the perm and temp hashtables as well as
TURBINE_USER.OBJECTDATA - this does not seem consistent with the
migration document.
Change the line:
catch ( Exception e )
to:
catch (Exception e)
So that it uses the turbine coding standard.
Looks like a capitalisation error in the line below: ExtendedUSer user =
(ExtendedUSer) data.getUser();
Your solution seems to rely on using the perm hashtable that is stored
in the TURBINE_USER.OBJECTDATA column and yet it retains the old
discussion that also provided an option to actually create columns for
the new user attributes in the TUEBINE_USER database table. IMHO the
perm/OBJECTDATA solution is suboptimal as it is difficult to view the
additional user attributes directly with SQL or to access them using
other tools or via Criteria. Is the concrete column solution still
possible under T2.2?
>
This is good stuff, but a little more work is required to tidy up the
issues I mention above.
Cheers,
Scott
--
Scott Eade
Backstage Technologies Pty. Ltd. http://www.backstagetech.com.au .Mac
Chat/AIM: seade at mac dot com
--
To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: Documentation update
Posted by Scott Eade <se...@backstagetech.com.au>.
> From: "Quinton McCombs" <qu...@bellsouth.net>
>
> I have created some documentation for migrating from 2.1 to 2.2 and
> updated the Extend User howto. I was hoping some of you could take a
> moment to look over what I have done and comment. I did the docs in
> xdoc format. The links below are to the generated HTML version.
> Depending on feedback, I will submit the patches and new files to the
> dev list in the next week.
>
> Migration:
> http://blaze.qdog.org/preview/howto/migration-from-2_1.html
While I cannot confirm the accuracy of the content (still trying to find
time to look at 2.2) I would query whether or not get/setTemp() are no
longer available in T2.2, did you perhaps mean get/setPerm()? Even
get/setPerm() appear to still be present, although these may just be the
mechanism used to store the concrete columns in the TURBINE_USER table (i.e.
the OBJECTDATA column that no longer exists). Looking at turbine-schema.xml
the OBJECTDATA column still seems to appear, but
TurbineUserPeer.buildCriteria() does not seem to populate it. I leave it to
you to check the detail.
>
> Extend User:
> http://blaze.qdog.org/preview/howto/extend-user-howto.html
I couldn't look at T2.2 without this, but again I cannot confirm the
accuracy of the content until I have time to try it. The document does
however make reference to the perm and temp hashtables as well as
TURBINE_USER.OBJECTDATA - this does not seem consistent with the migration
document.
Change the line:
catch ( Exception e )
to:
catch (Exception e)
So that it uses the turbine coding standard.
Looks like a capitalisation error in the line below:
ExtendedUSer user = (ExtendedUSer) data.getUser();
Your solution seems to rely on using the perm hashtable that is stored in
the TURBINE_USER.OBJECTDATA column and yet it retains the old discussion
that also provided an option to actually create columns for the new user
attributes in the TUEBINE_USER database table. IMHO the perm/OBJECTDATA
solution is suboptimal as it is difficult to view the additional user
attributes directly with SQL or to access them using other tools or via
Criteria. Is the concrete column solution still possible under T2.2?
>
This is good stuff, but a little more work is required to tidy up the issues
I mention above.
Cheers,
Scott
--
Scott Eade
Backstage Technologies Pty. Ltd.
http://www.backstagetech.com.au
.Mac Chat/AIM: seade at mac dot com
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: Documentation update
Posted by Quinton McCombs <qm...@nequalsone.com>.
You were correct. This has been fixed.
-----Original Message-----
From: Marc Lustig [mailto:mail@marclustig.com]
Sent: Saturday, December 14, 2002 9:32 AM
To: Turbine Users List
Subject: AW: Documentation update
Thanks Quinton, I will try that out.
In your Extend-User howto:
duplicate defintion:
private static TurbineMapBuilderAdapter mapBuilder;
private static final TurbineMapBuilderAdapter mapBuilder =
(TurbineMapBuilderAdapter)getMapBuilder("org.mycompany.sampleapp.util.db
.map
.TurbineMapBuilderAdapter");
I assume the fist one is not needed.
Marc
> -----Ursprungliche Nachricht-----
> Von: Quinton McCombs [mailto:quintonm@bellsouth.net]
> Gesendet: Freitag, 13. Dezember 2002 06:30
> An: Turbine Developers List; Turbine Users List
> Betreff: Documentation update
>
>
> I have created some documentation for migrating from 2.1 to 2.2 and
> updated the Extend User howto. I was hoping some of you could take a
> moment to look over what I have done and comment. I did the docs in
> xdoc format. The links below are to the generated HTML version.
> Depending on feedback, I will submit the patches and new files to the
> dev list in the next week.
>
> Migration: http://blaze.qdog.org/preview/howto/migration-from-2_1.html
>
> Extend User:
> http://blaze.qdog.org/preview/howto/extend-user-howto.html
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
--
To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
AW: Documentation update
Posted by Marc Lustig <ma...@marclustig.com>.
Thanks Quinton, I will try that out.
In your Extend-User howto:
duplicate defintion:
private static TurbineMapBuilderAdapter mapBuilder;
private static final TurbineMapBuilderAdapter mapBuilder =
(TurbineMapBuilderAdapter)getMapBuilder("org.mycompany.sampleapp.util.db.map
.TurbineMapBuilderAdapter");
I assume the fist one is not needed.
Marc
> -----Ursprungliche Nachricht-----
> Von: Quinton McCombs [mailto:quintonm@bellsouth.net]
> Gesendet: Freitag, 13. Dezember 2002 06:30
> An: Turbine Developers List; Turbine Users List
> Betreff: Documentation update
>
>
> I have created some documentation for migrating from 2.1 to 2.2 and
> updated the Extend User howto. I was hoping some of you could take a
> moment to look over what I have done and comment. I did the docs in
> xdoc format. The links below are to the generated HTML version.
> Depending on feedback, I will submit the patches and new files to the
> dev list in the next week.
>
> Migration:
> http://blaze.qdog.org/preview/howto/migration-from-2_1.html
>
> Extend User:
> http://blaze.qdog.org/preview/howto/extend-user-howto.html
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>