You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@nuttx.apache.org by "matiamic (via GitHub)" <gi...@apache.org> on 2026/03/02 02:42:37 UTC
[PR] boards/arm/stm32h7: Add support for the NUCLEO-H723ZG board [nuttx]
matiamic opened a new pull request, #18475:
URL: https://github.com/apache/nuttx/pull/18475
## Summary
This patch introduces support for the NUCLEO-H723ZG board.
## Impact
The patch adds new definitions to the stm32h7 arch logic in order to accommodate a memory configuration and a set of peripherals of the STM32H723ZG chip that are slightly different from the chips that are already supported.
The last commit adds a BSP that is based on the BSP for the NUCLEO-H743ZI board. The new BSP contains a few corrections and is stripped from the functionality that could not be tested during development.
## Testing
The included functionalities were tested with help of their corresponding test apps.
Tested functionalities:
- autoleds
- userleds
- buttons
- gpio
- spi - tested with oa_tc6 Ethernet board from an upcoming PR
- adc
- pwm
- USB OTG HS in FS mode as ACM device - tested by running the nsh console over USB.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@nuttx.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
Re: [PR] boards/arm/stm32h7: Add support for the NUCLEO-H723ZG board [nuttx]
Posted by "acassis (via GitHub)" <gi...@apache.org>.
acassis merged PR #18475:
URL: https://github.com/apache/nuttx/pull/18475
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@nuttx.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
Re: [PR] boards/arm/stm32h7: Add support for the NUCLEO-H723ZG board [nuttx]
Posted by "ppisa (via GitHub)" <gi...@apache.org>.
ppisa commented on PR #18475:
URL: https://github.com/apache/nuttx/pull/18475#issuecomment-3987636468
@matiamic thanks for contribution. I do not have Nucleo but I have tested the BSP on the partner custom board with STM32H723VG with modified oscillator and console on different UART ([experimental patch](https://gitlab.fel.cvut.cz/megse/ulsdc/nuttx/-/commit/77a9a2cea140e39dc965b11e7b2a1f5a618b49c6)) and NSH configuration works there too. So I ma waiting for BSP mainlining and then I or you can start with custom BSP variant for industrial partner HW.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@nuttx.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org