You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Abdul Rasool <ra...@gmail.com> on 2014/10/09 12:33:49 UTC
Guest VM with Multiple Networks on single VR (Virtual Router)
Hi All,
I am new to Cloudstack I would required your help to achieve my advanced
networking configuration. right now I am using CS-4.4.0 management server
with Mysql DB on it. I have 2 computing server with multiple NICs to test
my environment. As per the study guide I could able to test all the
functionality except my topology point view. Basically I would need my
guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to VM
communication and other Physical NIC (eth1) for my branch office
connectivity without configuring gateway on the interface. I will manually
add route on the VM. I have tried all the possibility ways with my poor
knowledge on the CS I could not able to add guest network without
mentioning IP range on the UI also cloudmonkey. I want to configure IPs on
the eth1 nic (Branch network) manually without getting IPs from DHCP, could
someone please guide me on this. We are already running similar setup on
VMware I hope this can be done on cloudstack as well.
Configuration details.
Management Server / computing server is running on Ubuntu detail are below.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.5 LTS
Release: 12.04
Codename: precise
Virtualization is on = KVM
Guest VM OS = Windows -7, CentOS
I have attached detailed diagram for your better understanding, please help
me to configure my scenario.
Thanks in Advance.
Abdul Rasool.
+91 98865 18767
Re: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
Hi All,
Could some one please help me on my issue. I have uploaded the diagram on
this below link.
https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
Thanks
AR
On Thu, Oct 9, 2014 at 5:42 PM, Abdul Rasool <ra...@gmail.com> wrote:
> Hi All,
>
>
>
> I am new to Cloudstack I would required your help to achieve my advanced
> networking configuration. right now I am using CS-4.4.0 management server
> with Mysql DB on it. I have 2 computing server with multiple NICs to test
> my environment. As per the study guide I could able to test all the
> functionality except my topology point view. Basically I would need my
> guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to VM
> communication and other Physical NIC (eth1) for my branch office
> connectivity without configuring gateway on the interface. I will manually
> add route on the VM. I have tried all the possibility ways with my poor
> knowledge on the CS I could not able to add guest network without
> mentioning IP range on the UI also cloudmonkey. I want to configure IPs on
> the eth1 nic (Branch network) manually without getting IPs from DHCP, could
> someone please guide me on this. We are already running similar setup on
> VMware I hope this can be done on cloudstack as well.
>
>
>
> Configuration details.
>
>
>
> Management Server / computing server is running on Ubuntu detail are below.
>
>
>
> Distributor ID: Ubuntu
>
> Description: Ubuntu 12.04.5 LTS
>
> Release: 12.04
>
> Codename: precise
>
> Virtualization is on = KVM
>
> Guest VM OS = Windows -7, CentOS
>
>
>
> I have attached detailed diagram for your better understanding, please
> help me to configure my scenario.
>
>
>
> Thanks in Advance.
>
>
>
> Abdul Rasool.
>
> +91 98865 18767
>
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
Hi Kirk,
Thanks a lot for your support I could able to make it. it is working as
expected....
Thanks Again.
AR
On Fri, Oct 17, 2014 at 2:12 PM, Kirk Kosinski <ki...@gmail.com>
wrote:
> If you didn't check anything at all when creating the Network Offering
> it is probably not configured correctly. Look at the default shared
> Network Offering and create a new offering based on that but without the
> things you specifically know you don't want, such as DHCP, DNS, etc..
> If you don't know what the setting is then just set it the same as the
> default offering. I believe the error you pasted is occurring because
> the offering has Specify IP ranges = no.
>
> Best regards,
> Kirk
>
> On 10/16/2014 10:27 PM, Abdul Rasool wrote:
> > My Network config details are below.
> >
> > 192.168.200.0/24 cloudbr3 --> Management NW
> > 192.168.100.0/24 cloudbr0 --> Guest+Public N/W
> > 192.168.201.0/24 cloudbr4 --> Storage N/W
> > NO IP mention on NIC cloudbr5 --> Guest Additional Network.
> >
> > I am trying to use guest additional network offering without using any
> ACS
> > offering like VR, DNS, DHCP, Firewall etc. I have created a new network
> > offering called Ex-LAN-NO-Offering while creating this I have not
> selected
> > any of the default offering from the list. at the end I have mention this
> > particular interface tags.thatz all.
> >
> > In this physical NIC (cloudbr5) doesn’t have any existing network when I
> > try configuring new network using Ex-LAN-NO-Offering I am getting this
> > error *Network offering with specified id doesn't support adding multiple
> > ip ranges*.
> >
> > Please help me am I doing any thing wrong here .
> >
> > Thanks
> > AR
> >
> > On Fri, Oct 17, 2014 at 5:58 AM, Kirk Kosinski <ki...@gmail.com>
> > wrote:
> >
> >> Please provide the complete details of the Network Offering you are
> >> trying to use.
> >>
> >> Best regards,
> >> Kirk
> >>
> >> On 10/16/2014 05:36 AM, Abdul Rasool wrote:
> >>> Hi Kirk,
> >>>
> >>> Thanks for your suggestion,
> >>>
> >>> I have tried doing the same mentioning some IPs with service offering
> >> which
> >>> has not selected any of the cloudstack service in the list, & account
> >>> specified. I get this below error Network offering with specified id
> >>> doesn't support adding multiple ip ranges
> >>>
> >>>
> >>> This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
> >>> physical NIC --> Guest---> Network --> add guest Network.
> >>>
> >>>
> >>> Please guide me why I am not able to add this new network on ACS.
> >>>
> >>> Regards,
> >>> AR
> >>>
> >>>
> >>> On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <kirkkosinski@gmail.com
> >
> >>> wrote:
> >>>
> >>>> Hi, Abdul. In your previous message you wrote:
> >>>>
> >>>>> I want to add additional
> >>>>> physical NIC to VM without mention IPs and service offering from
> >>>>> cloudstack
> >>>>
> >>>> To me this sounds like you want to make changes directly to a VM at
> the
> >>>> hypervisor level, so I was trying to explain that this won't work as
> >>>> CloudStack can and will undo any such changes. You will need to add
> >>>> every network to CloudStack that you want CloudStack-managed VMs to
> use.
> >>>> As I explained earlier you may be required to input the IP addresses
> in
> >>>> CloudStack, but that range will not be used if the network offering
> has
> >>>> DHCP disabled; thus you can configure the NIC in the VM OS with any
> >>>> static IP address you want.
> >>>>
> >>>> Best regards,
> >>>> Kirk
> >>>>
> >>>> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
> >>>>> Hi Kirk,
> >>>>>
> >>>>> I think we both are not on the same page, could you please go through
> >> my
> >>>>> below emails and let me know is my question is clear to you. if so
> >> please
> >>>>> help to configure this scenario.
> >>>>>
> >>>>> Thanks in advance.
> >>>>> AR
> >>>>>
> >>>>> On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <
> >> kirkkosinski@gmail.com>
> >>>>> wrote:
> >>>>>
> >>>>>> Hi, all VM configuration needs to be done in CloudStack, otherwise
> it
> >>>>>> will be undone by CloudStack under various common circumstance
> >> (reboot,
> >>>>>> stop/start, etc.).
> >>>>>>
> >>>>>> Best regards,
> >>>>>> Kirk
> >>>>>>
> >>>>>> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> >>>>>>> Hi Kirk
> >>>>>>>
> >>>>>>> Thanks for your reply,
> >>>>>>>
> >>>>>>> adding to some more points on the same case I want to add
> additional
> >>>>>>> physical NIC to VM without mention IPs and service offering from
> >>>>>> cloudstack
> >>>>>>> is that possible ?. in my case I have 1 VM which has public NIC and
> >>>> need
> >>>>>>> one more additional physical NIC for internal use. on the WAN side
> >>>> every
> >>>>>>> thing is working as expected in the same VM I would need to add one
> >>>> more
> >>>>>>> physical NIC which I need to manually configure IPs in different
> >> range
> >>>>>>> apart from the default CIDR.(Eg - connecting to different network
> >> over
> >>>>>>> MPLS) meaning one guest VM will have two network one towards to
> >> public
> >>>>>> with
> >>>>>>> default CIDR and other network towards to MPLS on different IP
> range,
> >>>> is
> >>>>>>> that possible if so could you please assist me on this.
> >>>>>>>
> >>>>>>> Thanks
> >>>>>>> AR
> >>>>>>>
> >>>>>>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <
> >> kirkkosinski@gmail.com
> >>>>>
> >>>>>>> wrote:
> >>>>>>>
> >>>>>>>> Hi, as I said before you may still be required to input an IP
> range
> >>>> when
> >>>>>>>> creating the network, but it won't be used if DHCP is disabled for
> >> the
> >>>>>>>> network. So just input any IP range when creating the network and
> >>>> then
> >>>>>>>> configure the desired IP address in the VM.
> >>>>>>>>
> >>>>>>>> Best regards,
> >>>>>>>> Kirk
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> >>>>>>>>> Hi Kirk
> >>>>>>>>>
> >>>>>>>>> Thanks for your response
> >>>>>>>>> I have tried creating service offering without dhcp but while
> >>>> creating
> >>>>>>>>> guest network its forcing me to mention IP range. My requirement
> >> is
> >>>>>>>> that i
> >>>>>>>>> will get only 1 IP from each branch network that I have to
> >> configure
> >>>> in
> >>>>>>>>> guest VM directly. In the branch network switch is created with
> >>>>>> multiple
> >>>>>>>> L2
> >>>>>>>>> vlans. Please guide me how to setup this network.
> >>>>>>>>>
> >>>>>>>>> I hope you have seen my model network diagram which i have
> >> uploaded
> >>>> in
> >>>>>>>>> google drive.
> >>>>>>>>>
> >>>>>>>>> Thx in advance
> >>>>>>>>> AR.
> >>>>>>>>> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com>
> >>>> wrote:
> >>>>>>>>>
> >>>>>>>>>> Hi, if you don't want DHCP for your branch office network you
> need
> >>>> to
> >>>>>>>>>> create a Network Offering without DHCP and select that offering
> >> when
> >>>>>>>>>> adding the network in CloudStack. You may still be required to
> >>>> input
> >>>>>> an
> >>>>>>>>>> IP range when creating the network, but CloudStack won't be able
> >> to
> >>>>>>>>>> assign the IPs with DHCP disabled.
> >>>>>>>>>>
> >>>>>>>>>> Best regards,
> >>>>>>>>>> Kirk
> >>>>>>>>>>
> >>>>>>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> >>>>>>>>>>> Hi All,
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> I am new to Cloudstack I would required your help to achieve my
> >>>>>>>> advanced
> >>>>>>>>>>> networking configuration. right now I am using CS-4.4.0
> >> management
> >>>>>>>> server
> >>>>>>>>>>> with Mysql DB on it. I have 2 computing server with multiple
> NICs
> >>>> to
> >>>>>>>> test
> >>>>>>>>>>> my environment. As per the study guide I could able to test all
> >> the
> >>>>>>>>>>> functionality except my topology point view. Basically I would
> >> need
> >>>>>> my
> >>>>>>>>>>> guest VM to have 2 Physical NICs one towards to Internet
> (eth0) &
> >>>> VM
> >>>>>> to
> >>>>>>>>>> VM
> >>>>>>>>>>> communication and other Physical NIC (eth1) for my branch
> office
> >>>>>>>>>>> connectivity without configuring gateway on the interface. I
> will
> >>>>>>>>>> manually
> >>>>>>>>>>> add route on the VM. I have tried all the possibility ways with
> >> my
> >>>>>> poor
> >>>>>>>>>>> knowledge on the CS I could not able to add guest network
> without
> >>>>>>>>>>> mentioning IP range on the UI also cloudmonkey. I want to
> >>>> configure
> >>>>>>>> IPs
> >>>>>>>>>> on
> >>>>>>>>>>> the eth1 nic (Branch network) manually without getting IPs from
> >>>> DHCP,
> >>>>>>>>>> could
> >>>>>>>>>>> someone please guide me on this. We are already running
> similar
> >>>>>> setup
> >>>>>>>> on
> >>>>>>>>>>> VMware I hope this can be done on cloudstack as well.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Configuration details.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Management Server / computing server is running on Ubuntu
> detail
> >>>> are
> >>>>>>>>>> below.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Distributor ID: Ubuntu
> >>>>>>>>>>>
> >>>>>>>>>>> Description: Ubuntu 12.04.5 LTS
> >>>>>>>>>>>
> >>>>>>>>>>> Release: 12.04
> >>>>>>>>>>>
> >>>>>>>>>>> Codename: precise
> >>>>>>>>>>>
> >>>>>>>>>>> Virtualization is on = KVM
> >>>>>>>>>>>
> >>>>>>>>>>> Guest VM OS = Windows -7, CentOS
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> I have attached detailed diagram for your better understanding,
> >>>>>> please
> >>>>>>>>>> help
> >>>>>>>>>>> me to configure my scenario.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Please find this below link for network diagram.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>
> >>>>>>
> >>>>
> >>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Thanks in Advance.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Abdul Rasool.
> >>>>>>>>>>>
> >>>>>>>>>>> +91 98865 18767
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>
> >
>
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Kirk Kosinski <ki...@gmail.com>.
If you didn't check anything at all when creating the Network Offering
it is probably not configured correctly. Look at the default shared
Network Offering and create a new offering based on that but without the
things you specifically know you don't want, such as DHCP, DNS, etc..
If you don't know what the setting is then just set it the same as the
default offering. I believe the error you pasted is occurring because
the offering has Specify IP ranges = no.
Best regards,
Kirk
On 10/16/2014 10:27 PM, Abdul Rasool wrote:
> My Network config details are below.
>
> 192.168.200.0/24 cloudbr3 --> Management NW
> 192.168.100.0/24 cloudbr0 --> Guest+Public N/W
> 192.168.201.0/24 cloudbr4 --> Storage N/W
> NO IP mention on NIC cloudbr5 --> Guest Additional Network.
>
> I am trying to use guest additional network offering without using any ACS
> offering like VR, DNS, DHCP, Firewall etc. I have created a new network
> offering called Ex-LAN-NO-Offering while creating this I have not selected
> any of the default offering from the list. at the end I have mention this
> particular interface tags.thatz all.
>
> In this physical NIC (cloudbr5) doesn’t have any existing network when I
> try configuring new network using Ex-LAN-NO-Offering I am getting this
> error *Network offering with specified id doesn't support adding multiple
> ip ranges*.
>
> Please help me am I doing any thing wrong here .
>
> Thanks
> AR
>
> On Fri, Oct 17, 2014 at 5:58 AM, Kirk Kosinski <ki...@gmail.com>
> wrote:
>
>> Please provide the complete details of the Network Offering you are
>> trying to use.
>>
>> Best regards,
>> Kirk
>>
>> On 10/16/2014 05:36 AM, Abdul Rasool wrote:
>>> Hi Kirk,
>>>
>>> Thanks for your suggestion,
>>>
>>> I have tried doing the same mentioning some IPs with service offering
>> which
>>> has not selected any of the cloudstack service in the list, & account
>>> specified. I get this below error Network offering with specified id
>>> doesn't support adding multiple ip ranges
>>>
>>>
>>> This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
>>> physical NIC --> Guest---> Network --> add guest Network.
>>>
>>>
>>> Please guide me why I am not able to add this new network on ACS.
>>>
>>> Regards,
>>> AR
>>>
>>>
>>> On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <ki...@gmail.com>
>>> wrote:
>>>
>>>> Hi, Abdul. In your previous message you wrote:
>>>>
>>>>> I want to add additional
>>>>> physical NIC to VM without mention IPs and service offering from
>>>>> cloudstack
>>>>
>>>> To me this sounds like you want to make changes directly to a VM at the
>>>> hypervisor level, so I was trying to explain that this won't work as
>>>> CloudStack can and will undo any such changes. You will need to add
>>>> every network to CloudStack that you want CloudStack-managed VMs to use.
>>>> As I explained earlier you may be required to input the IP addresses in
>>>> CloudStack, but that range will not be used if the network offering has
>>>> DHCP disabled; thus you can configure the NIC in the VM OS with any
>>>> static IP address you want.
>>>>
>>>> Best regards,
>>>> Kirk
>>>>
>>>> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
>>>>> Hi Kirk,
>>>>>
>>>>> I think we both are not on the same page, could you please go through
>> my
>>>>> below emails and let me know is my question is clear to you. if so
>> please
>>>>> help to configure this scenario.
>>>>>
>>>>> Thanks in advance.
>>>>> AR
>>>>>
>>>>> On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <
>> kirkkosinski@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi, all VM configuration needs to be done in CloudStack, otherwise it
>>>>>> will be undone by CloudStack under various common circumstance
>> (reboot,
>>>>>> stop/start, etc.).
>>>>>>
>>>>>> Best regards,
>>>>>> Kirk
>>>>>>
>>>>>> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
>>>>>>> Hi Kirk
>>>>>>>
>>>>>>> Thanks for your reply,
>>>>>>>
>>>>>>> adding to some more points on the same case I want to add additional
>>>>>>> physical NIC to VM without mention IPs and service offering from
>>>>>> cloudstack
>>>>>>> is that possible ?. in my case I have 1 VM which has public NIC and
>>>> need
>>>>>>> one more additional physical NIC for internal use. on the WAN side
>>>> every
>>>>>>> thing is working as expected in the same VM I would need to add one
>>>> more
>>>>>>> physical NIC which I need to manually configure IPs in different
>> range
>>>>>>> apart from the default CIDR.(Eg - connecting to different network
>> over
>>>>>>> MPLS) meaning one guest VM will have two network one towards to
>> public
>>>>>> with
>>>>>>> default CIDR and other network towards to MPLS on different IP range,
>>>> is
>>>>>>> that possible if so could you please assist me on this.
>>>>>>>
>>>>>>> Thanks
>>>>>>> AR
>>>>>>>
>>>>>>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <
>> kirkkosinski@gmail.com
>>>>>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi, as I said before you may still be required to input an IP range
>>>> when
>>>>>>>> creating the network, but it won't be used if DHCP is disabled for
>> the
>>>>>>>> network. So just input any IP range when creating the network and
>>>> then
>>>>>>>> configure the desired IP address in the VM.
>>>>>>>>
>>>>>>>> Best regards,
>>>>>>>> Kirk
>>>>>>>>
>>>>>>>>
>>>>>>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
>>>>>>>>> Hi Kirk
>>>>>>>>>
>>>>>>>>> Thanks for your response
>>>>>>>>> I have tried creating service offering without dhcp but while
>>>> creating
>>>>>>>>> guest network its forcing me to mention IP range. My requirement
>> is
>>>>>>>> that i
>>>>>>>>> will get only 1 IP from each branch network that I have to
>> configure
>>>> in
>>>>>>>>> guest VM directly. In the branch network switch is created with
>>>>>> multiple
>>>>>>>> L2
>>>>>>>>> vlans. Please guide me how to setup this network.
>>>>>>>>>
>>>>>>>>> I hope you have seen my model network diagram which i have
>> uploaded
>>>> in
>>>>>>>>> google drive.
>>>>>>>>>
>>>>>>>>> Thx in advance
>>>>>>>>> AR.
>>>>>>>>> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com>
>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hi, if you don't want DHCP for your branch office network you need
>>>> to
>>>>>>>>>> create a Network Offering without DHCP and select that offering
>> when
>>>>>>>>>> adding the network in CloudStack. You may still be required to
>>>> input
>>>>>> an
>>>>>>>>>> IP range when creating the network, but CloudStack won't be able
>> to
>>>>>>>>>> assign the IPs with DHCP disabled.
>>>>>>>>>>
>>>>>>>>>> Best regards,
>>>>>>>>>> Kirk
>>>>>>>>>>
>>>>>>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
>>>>>>>>>>> Hi All,
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I am new to Cloudstack I would required your help to achieve my
>>>>>>>> advanced
>>>>>>>>>>> networking configuration. right now I am using CS-4.4.0
>> management
>>>>>>>> server
>>>>>>>>>>> with Mysql DB on it. I have 2 computing server with multiple NICs
>>>> to
>>>>>>>> test
>>>>>>>>>>> my environment. As per the study guide I could able to test all
>> the
>>>>>>>>>>> functionality except my topology point view. Basically I would
>> need
>>>>>> my
>>>>>>>>>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) &
>>>> VM
>>>>>> to
>>>>>>>>>> VM
>>>>>>>>>>> communication and other Physical NIC (eth1) for my branch office
>>>>>>>>>>> connectivity without configuring gateway on the interface. I will
>>>>>>>>>> manually
>>>>>>>>>>> add route on the VM. I have tried all the possibility ways with
>> my
>>>>>> poor
>>>>>>>>>>> knowledge on the CS I could not able to add guest network without
>>>>>>>>>>> mentioning IP range on the UI also cloudmonkey. I want to
>>>> configure
>>>>>>>> IPs
>>>>>>>>>> on
>>>>>>>>>>> the eth1 nic (Branch network) manually without getting IPs from
>>>> DHCP,
>>>>>>>>>> could
>>>>>>>>>>> someone please guide me on this. We are already running similar
>>>>>> setup
>>>>>>>> on
>>>>>>>>>>> VMware I hope this can be done on cloudstack as well.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Configuration details.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Management Server / computing server is running on Ubuntu detail
>>>> are
>>>>>>>>>> below.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Distributor ID: Ubuntu
>>>>>>>>>>>
>>>>>>>>>>> Description: Ubuntu 12.04.5 LTS
>>>>>>>>>>>
>>>>>>>>>>> Release: 12.04
>>>>>>>>>>>
>>>>>>>>>>> Codename: precise
>>>>>>>>>>>
>>>>>>>>>>> Virtualization is on = KVM
>>>>>>>>>>>
>>>>>>>>>>> Guest VM OS = Windows -7, CentOS
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I have attached detailed diagram for your better understanding,
>>>>>> please
>>>>>>>>>> help
>>>>>>>>>>> me to configure my scenario.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Please find this below link for network diagram.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>
>>>>
>> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Thanks in Advance.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Abdul Rasool.
>>>>>>>>>>>
>>>>>>>>>>> +91 98865 18767
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
My Network config details are below.
192.168.200.0/24 cloudbr3 --> Management NW
192.168.100.0/24 cloudbr0 --> Guest+Public N/W
192.168.201.0/24 cloudbr4 --> Storage N/W
NO IP mention on NIC cloudbr5 --> Guest Additional Network.
I am trying to use guest additional network offering without using any ACS
offering like VR, DNS, DHCP, Firewall etc. I have created a new network
offering called Ex-LAN-NO-Offering while creating this I have not selected
any of the default offering from the list. at the end I have mention this
particular interface tags.thatz all.
In this physical NIC (cloudbr5) doesn’t have any existing network when I
try configuring new network using Ex-LAN-NO-Offering I am getting this
error *Network offering with specified id doesn't support adding multiple
ip ranges*.
Please help me am I doing any thing wrong here .
Thanks
AR
On Fri, Oct 17, 2014 at 5:58 AM, Kirk Kosinski <ki...@gmail.com>
wrote:
> Please provide the complete details of the Network Offering you are
> trying to use.
>
> Best regards,
> Kirk
>
> On 10/16/2014 05:36 AM, Abdul Rasool wrote:
> > Hi Kirk,
> >
> > Thanks for your suggestion,
> >
> > I have tried doing the same mentioning some IPs with service offering
> which
> > has not selected any of the cloudstack service in the list, & account
> > specified. I get this below error Network offering with specified id
> > doesn't support adding multiple ip ranges
> >
> >
> > This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
> > physical NIC --> Guest---> Network --> add guest Network.
> >
> >
> > Please guide me why I am not able to add this new network on ACS.
> >
> > Regards,
> > AR
> >
> >
> > On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <ki...@gmail.com>
> > wrote:
> >
> >> Hi, Abdul. In your previous message you wrote:
> >>
> >>> I want to add additional
> >>> physical NIC to VM without mention IPs and service offering from
> >>> cloudstack
> >>
> >> To me this sounds like you want to make changes directly to a VM at the
> >> hypervisor level, so I was trying to explain that this won't work as
> >> CloudStack can and will undo any such changes. You will need to add
> >> every network to CloudStack that you want CloudStack-managed VMs to use.
> >> As I explained earlier you may be required to input the IP addresses in
> >> CloudStack, but that range will not be used if the network offering has
> >> DHCP disabled; thus you can configure the NIC in the VM OS with any
> >> static IP address you want.
> >>
> >> Best regards,
> >> Kirk
> >>
> >> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
> >>> Hi Kirk,
> >>>
> >>> I think we both are not on the same page, could you please go through
> my
> >>> below emails and let me know is my question is clear to you. if so
> please
> >>> help to configure this scenario.
> >>>
> >>> Thanks in advance.
> >>> AR
> >>>
> >>> On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <
> kirkkosinski@gmail.com>
> >>> wrote:
> >>>
> >>>> Hi, all VM configuration needs to be done in CloudStack, otherwise it
> >>>> will be undone by CloudStack under various common circumstance
> (reboot,
> >>>> stop/start, etc.).
> >>>>
> >>>> Best regards,
> >>>> Kirk
> >>>>
> >>>> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> >>>>> Hi Kirk
> >>>>>
> >>>>> Thanks for your reply,
> >>>>>
> >>>>> adding to some more points on the same case I want to add additional
> >>>>> physical NIC to VM without mention IPs and service offering from
> >>>> cloudstack
> >>>>> is that possible ?. in my case I have 1 VM which has public NIC and
> >> need
> >>>>> one more additional physical NIC for internal use. on the WAN side
> >> every
> >>>>> thing is working as expected in the same VM I would need to add one
> >> more
> >>>>> physical NIC which I need to manually configure IPs in different
> range
> >>>>> apart from the default CIDR.(Eg - connecting to different network
> over
> >>>>> MPLS) meaning one guest VM will have two network one towards to
> public
> >>>> with
> >>>>> default CIDR and other network towards to MPLS on different IP range,
> >> is
> >>>>> that possible if so could you please assist me on this.
> >>>>>
> >>>>> Thanks
> >>>>> AR
> >>>>>
> >>>>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <
> kirkkosinski@gmail.com
> >>>
> >>>>> wrote:
> >>>>>
> >>>>>> Hi, as I said before you may still be required to input an IP range
> >> when
> >>>>>> creating the network, but it won't be used if DHCP is disabled for
> the
> >>>>>> network. So just input any IP range when creating the network and
> >> then
> >>>>>> configure the desired IP address in the VM.
> >>>>>>
> >>>>>> Best regards,
> >>>>>> Kirk
> >>>>>>
> >>>>>>
> >>>>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> >>>>>>> Hi Kirk
> >>>>>>>
> >>>>>>> Thanks for your response
> >>>>>>> I have tried creating service offering without dhcp but while
> >> creating
> >>>>>>> guest network its forcing me to mention IP range. My requirement
> is
> >>>>>> that i
> >>>>>>> will get only 1 IP from each branch network that I have to
> configure
> >> in
> >>>>>>> guest VM directly. In the branch network switch is created with
> >>>> multiple
> >>>>>> L2
> >>>>>>> vlans. Please guide me how to setup this network.
> >>>>>>>
> >>>>>>> I hope you have seen my model network diagram which i have
> uploaded
> >> in
> >>>>>>> google drive.
> >>>>>>>
> >>>>>>> Thx in advance
> >>>>>>> AR.
> >>>>>>> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com>
> >> wrote:
> >>>>>>>
> >>>>>>>> Hi, if you don't want DHCP for your branch office network you need
> >> to
> >>>>>>>> create a Network Offering without DHCP and select that offering
> when
> >>>>>>>> adding the network in CloudStack. You may still be required to
> >> input
> >>>> an
> >>>>>>>> IP range when creating the network, but CloudStack won't be able
> to
> >>>>>>>> assign the IPs with DHCP disabled.
> >>>>>>>>
> >>>>>>>> Best regards,
> >>>>>>>> Kirk
> >>>>>>>>
> >>>>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> >>>>>>>>> Hi All,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> I am new to Cloudstack I would required your help to achieve my
> >>>>>> advanced
> >>>>>>>>> networking configuration. right now I am using CS-4.4.0
> management
> >>>>>> server
> >>>>>>>>> with Mysql DB on it. I have 2 computing server with multiple NICs
> >> to
> >>>>>> test
> >>>>>>>>> my environment. As per the study guide I could able to test all
> the
> >>>>>>>>> functionality except my topology point view. Basically I would
> need
> >>>> my
> >>>>>>>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) &
> >> VM
> >>>> to
> >>>>>>>> VM
> >>>>>>>>> communication and other Physical NIC (eth1) for my branch office
> >>>>>>>>> connectivity without configuring gateway on the interface. I will
> >>>>>>>> manually
> >>>>>>>>> add route on the VM. I have tried all the possibility ways with
> my
> >>>> poor
> >>>>>>>>> knowledge on the CS I could not able to add guest network without
> >>>>>>>>> mentioning IP range on the UI also cloudmonkey. I want to
> >> configure
> >>>>>> IPs
> >>>>>>>> on
> >>>>>>>>> the eth1 nic (Branch network) manually without getting IPs from
> >> DHCP,
> >>>>>>>> could
> >>>>>>>>> someone please guide me on this. We are already running similar
> >>>> setup
> >>>>>> on
> >>>>>>>>> VMware I hope this can be done on cloudstack as well.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Configuration details.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Management Server / computing server is running on Ubuntu detail
> >> are
> >>>>>>>> below.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Distributor ID: Ubuntu
> >>>>>>>>>
> >>>>>>>>> Description: Ubuntu 12.04.5 LTS
> >>>>>>>>>
> >>>>>>>>> Release: 12.04
> >>>>>>>>>
> >>>>>>>>> Codename: precise
> >>>>>>>>>
> >>>>>>>>> Virtualization is on = KVM
> >>>>>>>>>
> >>>>>>>>> Guest VM OS = Windows -7, CentOS
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> I have attached detailed diagram for your better understanding,
> >>>> please
> >>>>>>>> help
> >>>>>>>>> me to configure my scenario.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Please find this below link for network diagram.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>
> >>>>
> >>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Thanks in Advance.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Abdul Rasool.
> >>>>>>>>>
> >>>>>>>>> +91 98865 18767
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>
> >
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Kirk Kosinski <ki...@gmail.com>.
Please provide the complete details of the Network Offering you are
trying to use.
Best regards,
Kirk
On 10/16/2014 05:36 AM, Abdul Rasool wrote:
> Hi Kirk,
>
> Thanks for your suggestion,
>
> I have tried doing the same mentioning some IPs with service offering which
> has not selected any of the cloudstack service in the list, & account
> specified. I get this below error Network offering with specified id
> doesn't support adding multiple ip ranges
>
>
> This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
> physical NIC --> Guest---> Network --> add guest Network.
>
>
> Please guide me why I am not able to add this new network on ACS.
>
> Regards,
> AR
>
>
> On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <ki...@gmail.com>
> wrote:
>
>> Hi, Abdul. In your previous message you wrote:
>>
>>> I want to add additional
>>> physical NIC to VM without mention IPs and service offering from
>>> cloudstack
>>
>> To me this sounds like you want to make changes directly to a VM at the
>> hypervisor level, so I was trying to explain that this won't work as
>> CloudStack can and will undo any such changes. You will need to add
>> every network to CloudStack that you want CloudStack-managed VMs to use.
>> As I explained earlier you may be required to input the IP addresses in
>> CloudStack, but that range will not be used if the network offering has
>> DHCP disabled; thus you can configure the NIC in the VM OS with any
>> static IP address you want.
>>
>> Best regards,
>> Kirk
>>
>> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
>>> Hi Kirk,
>>>
>>> I think we both are not on the same page, could you please go through my
>>> below emails and let me know is my question is clear to you. if so please
>>> help to configure this scenario.
>>>
>>> Thanks in advance.
>>> AR
>>>
>>> On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <ki...@gmail.com>
>>> wrote:
>>>
>>>> Hi, all VM configuration needs to be done in CloudStack, otherwise it
>>>> will be undone by CloudStack under various common circumstance (reboot,
>>>> stop/start, etc.).
>>>>
>>>> Best regards,
>>>> Kirk
>>>>
>>>> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
>>>>> Hi Kirk
>>>>>
>>>>> Thanks for your reply,
>>>>>
>>>>> adding to some more points on the same case I want to add additional
>>>>> physical NIC to VM without mention IPs and service offering from
>>>> cloudstack
>>>>> is that possible ?. in my case I have 1 VM which has public NIC and
>> need
>>>>> one more additional physical NIC for internal use. on the WAN side
>> every
>>>>> thing is working as expected in the same VM I would need to add one
>> more
>>>>> physical NIC which I need to manually configure IPs in different range
>>>>> apart from the default CIDR.(Eg - connecting to different network over
>>>>> MPLS) meaning one guest VM will have two network one towards to public
>>>> with
>>>>> default CIDR and other network towards to MPLS on different IP range,
>> is
>>>>> that possible if so could you please assist me on this.
>>>>>
>>>>> Thanks
>>>>> AR
>>>>>
>>>>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <kirkkosinski@gmail.com
>>>
>>>>> wrote:
>>>>>
>>>>>> Hi, as I said before you may still be required to input an IP range
>> when
>>>>>> creating the network, but it won't be used if DHCP is disabled for the
>>>>>> network. So just input any IP range when creating the network and
>> then
>>>>>> configure the desired IP address in the VM.
>>>>>>
>>>>>> Best regards,
>>>>>> Kirk
>>>>>>
>>>>>>
>>>>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
>>>>>>> Hi Kirk
>>>>>>>
>>>>>>> Thanks for your response
>>>>>>> I have tried creating service offering without dhcp but while
>> creating
>>>>>>> guest network its forcing me to mention IP range. My requirement is
>>>>>> that i
>>>>>>> will get only 1 IP from each branch network that I have to configure
>> in
>>>>>>> guest VM directly. In the branch network switch is created with
>>>> multiple
>>>>>> L2
>>>>>>> vlans. Please guide me how to setup this network.
>>>>>>>
>>>>>>> I hope you have seen my model network diagram which i have uploaded
>> in
>>>>>>> google drive.
>>>>>>>
>>>>>>> Thx in advance
>>>>>>> AR.
>>>>>>> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com>
>> wrote:
>>>>>>>
>>>>>>>> Hi, if you don't want DHCP for your branch office network you need
>> to
>>>>>>>> create a Network Offering without DHCP and select that offering when
>>>>>>>> adding the network in CloudStack. You may still be required to
>> input
>>>> an
>>>>>>>> IP range when creating the network, but CloudStack won't be able to
>>>>>>>> assign the IPs with DHCP disabled.
>>>>>>>>
>>>>>>>> Best regards,
>>>>>>>> Kirk
>>>>>>>>
>>>>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
>>>>>>>>> Hi All,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I am new to Cloudstack I would required your help to achieve my
>>>>>> advanced
>>>>>>>>> networking configuration. right now I am using CS-4.4.0 management
>>>>>> server
>>>>>>>>> with Mysql DB on it. I have 2 computing server with multiple NICs
>> to
>>>>>> test
>>>>>>>>> my environment. As per the study guide I could able to test all the
>>>>>>>>> functionality except my topology point view. Basically I would need
>>>> my
>>>>>>>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) &
>> VM
>>>> to
>>>>>>>> VM
>>>>>>>>> communication and other Physical NIC (eth1) for my branch office
>>>>>>>>> connectivity without configuring gateway on the interface. I will
>>>>>>>> manually
>>>>>>>>> add route on the VM. I have tried all the possibility ways with my
>>>> poor
>>>>>>>>> knowledge on the CS I could not able to add guest network without
>>>>>>>>> mentioning IP range on the UI also cloudmonkey. I want to
>> configure
>>>>>> IPs
>>>>>>>> on
>>>>>>>>> the eth1 nic (Branch network) manually without getting IPs from
>> DHCP,
>>>>>>>> could
>>>>>>>>> someone please guide me on this. We are already running similar
>>>> setup
>>>>>> on
>>>>>>>>> VMware I hope this can be done on cloudstack as well.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Configuration details.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Management Server / computing server is running on Ubuntu detail
>> are
>>>>>>>> below.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Distributor ID: Ubuntu
>>>>>>>>>
>>>>>>>>> Description: Ubuntu 12.04.5 LTS
>>>>>>>>>
>>>>>>>>> Release: 12.04
>>>>>>>>>
>>>>>>>>> Codename: precise
>>>>>>>>>
>>>>>>>>> Virtualization is on = KVM
>>>>>>>>>
>>>>>>>>> Guest VM OS = Windows -7, CentOS
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I have attached detailed diagram for your better understanding,
>>>> please
>>>>>>>> help
>>>>>>>>> me to configure my scenario.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Please find this below link for network diagram.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>
>>>>
>> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks in Advance.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Abdul Rasool.
>>>>>>>>>
>>>>>>>>> +91 98865 18767
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
Hi Kirk,
Thanks for your suggestion,
I have tried doing the same mentioning some IPs with service offering which
has not selected any of the cloudstack service in the list, & account
specified. I get this below error Network offering with specified id
doesn't support adding multiple ip ranges
This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
physical NIC --> Guest---> Network --> add guest Network.
Please guide me why I am not able to add this new network on ACS.
Regards,
AR
On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <ki...@gmail.com>
wrote:
> Hi, Abdul. In your previous message you wrote:
>
> > I want to add additional
> > physical NIC to VM without mention IPs and service offering from
> > cloudstack
>
> To me this sounds like you want to make changes directly to a VM at the
> hypervisor level, so I was trying to explain that this won't work as
> CloudStack can and will undo any such changes. You will need to add
> every network to CloudStack that you want CloudStack-managed VMs to use.
> As I explained earlier you may be required to input the IP addresses in
> CloudStack, but that range will not be used if the network offering has
> DHCP disabled; thus you can configure the NIC in the VM OS with any
> static IP address you want.
>
> Best regards,
> Kirk
>
> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
> > Hi Kirk,
> >
> > I think we both are not on the same page, could you please go through my
> > below emails and let me know is my question is clear to you. if so please
> > help to configure this scenario.
> >
> > Thanks in advance.
> > AR
> >
> > On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <ki...@gmail.com>
> > wrote:
> >
> >> Hi, all VM configuration needs to be done in CloudStack, otherwise it
> >> will be undone by CloudStack under various common circumstance (reboot,
> >> stop/start, etc.).
> >>
> >> Best regards,
> >> Kirk
> >>
> >> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> >>> Hi Kirk
> >>>
> >>> Thanks for your reply,
> >>>
> >>> adding to some more points on the same case I want to add additional
> >>> physical NIC to VM without mention IPs and service offering from
> >> cloudstack
> >>> is that possible ?. in my case I have 1 VM which has public NIC and
> need
> >>> one more additional physical NIC for internal use. on the WAN side
> every
> >>> thing is working as expected in the same VM I would need to add one
> more
> >>> physical NIC which I need to manually configure IPs in different range
> >>> apart from the default CIDR.(Eg - connecting to different network over
> >>> MPLS) meaning one guest VM will have two network one towards to public
> >> with
> >>> default CIDR and other network towards to MPLS on different IP range,
> is
> >>> that possible if so could you please assist me on this.
> >>>
> >>> Thanks
> >>> AR
> >>>
> >>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <kirkkosinski@gmail.com
> >
> >>> wrote:
> >>>
> >>>> Hi, as I said before you may still be required to input an IP range
> when
> >>>> creating the network, but it won't be used if DHCP is disabled for the
> >>>> network. So just input any IP range when creating the network and
> then
> >>>> configure the desired IP address in the VM.
> >>>>
> >>>> Best regards,
> >>>> Kirk
> >>>>
> >>>>
> >>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> >>>>> Hi Kirk
> >>>>>
> >>>>> Thanks for your response
> >>>>> I have tried creating service offering without dhcp but while
> creating
> >>>>> guest network its forcing me to mention IP range. My requirement is
> >>>> that i
> >>>>> will get only 1 IP from each branch network that I have to configure
> in
> >>>>> guest VM directly. In the branch network switch is created with
> >> multiple
> >>>> L2
> >>>>> vlans. Please guide me how to setup this network.
> >>>>>
> >>>>> I hope you have seen my model network diagram which i have uploaded
> in
> >>>>> google drive.
> >>>>>
> >>>>> Thx in advance
> >>>>> AR.
> >>>>> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com>
> wrote:
> >>>>>
> >>>>>> Hi, if you don't want DHCP for your branch office network you need
> to
> >>>>>> create a Network Offering without DHCP and select that offering when
> >>>>>> adding the network in CloudStack. You may still be required to
> input
> >> an
> >>>>>> IP range when creating the network, but CloudStack won't be able to
> >>>>>> assign the IPs with DHCP disabled.
> >>>>>>
> >>>>>> Best regards,
> >>>>>> Kirk
> >>>>>>
> >>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> >>>>>>> Hi All,
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> I am new to Cloudstack I would required your help to achieve my
> >>>> advanced
> >>>>>>> networking configuration. right now I am using CS-4.4.0 management
> >>>> server
> >>>>>>> with Mysql DB on it. I have 2 computing server with multiple NICs
> to
> >>>> test
> >>>>>>> my environment. As per the study guide I could able to test all the
> >>>>>>> functionality except my topology point view. Basically I would need
> >> my
> >>>>>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) &
> VM
> >> to
> >>>>>> VM
> >>>>>>> communication and other Physical NIC (eth1) for my branch office
> >>>>>>> connectivity without configuring gateway on the interface. I will
> >>>>>> manually
> >>>>>>> add route on the VM. I have tried all the possibility ways with my
> >> poor
> >>>>>>> knowledge on the CS I could not able to add guest network without
> >>>>>>> mentioning IP range on the UI also cloudmonkey. I want to
> configure
> >>>> IPs
> >>>>>> on
> >>>>>>> the eth1 nic (Branch network) manually without getting IPs from
> DHCP,
> >>>>>> could
> >>>>>>> someone please guide me on this. We are already running similar
> >> setup
> >>>> on
> >>>>>>> VMware I hope this can be done on cloudstack as well.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Configuration details.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Management Server / computing server is running on Ubuntu detail
> are
> >>>>>> below.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Distributor ID: Ubuntu
> >>>>>>>
> >>>>>>> Description: Ubuntu 12.04.5 LTS
> >>>>>>>
> >>>>>>> Release: 12.04
> >>>>>>>
> >>>>>>> Codename: precise
> >>>>>>>
> >>>>>>> Virtualization is on = KVM
> >>>>>>>
> >>>>>>> Guest VM OS = Windows -7, CentOS
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> I have attached detailed diagram for your better understanding,
> >> please
> >>>>>> help
> >>>>>>> me to configure my scenario.
> >>>>>>>
> >>>>>>>
> >>>>>>> Please find this below link for network diagram.
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>
> >>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Thanks in Advance.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Abdul Rasool.
> >>>>>>>
> >>>>>>> +91 98865 18767
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>
> >
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Kirk Kosinski <ki...@gmail.com>.
Hi, Abdul. In your previous message you wrote:
> I want to add additional
> physical NIC to VM without mention IPs and service offering from
> cloudstack
To me this sounds like you want to make changes directly to a VM at the
hypervisor level, so I was trying to explain that this won't work as
CloudStack can and will undo any such changes. You will need to add
every network to CloudStack that you want CloudStack-managed VMs to use.
As I explained earlier you may be required to input the IP addresses in
CloudStack, but that range will not be used if the network offering has
DHCP disabled; thus you can configure the NIC in the VM OS with any
static IP address you want.
Best regards,
Kirk
On 10/14/2014 05:04 AM, Abdul Rasool wrote:
> Hi Kirk,
>
> I think we both are not on the same page, could you please go through my
> below emails and let me know is my question is clear to you. if so please
> help to configure this scenario.
>
> Thanks in advance.
> AR
>
> On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <ki...@gmail.com>
> wrote:
>
>> Hi, all VM configuration needs to be done in CloudStack, otherwise it
>> will be undone by CloudStack under various common circumstance (reboot,
>> stop/start, etc.).
>>
>> Best regards,
>> Kirk
>>
>> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
>>> Hi Kirk
>>>
>>> Thanks for your reply,
>>>
>>> adding to some more points on the same case I want to add additional
>>> physical NIC to VM without mention IPs and service offering from
>> cloudstack
>>> is that possible ?. in my case I have 1 VM which has public NIC and need
>>> one more additional physical NIC for internal use. on the WAN side every
>>> thing is working as expected in the same VM I would need to add one more
>>> physical NIC which I need to manually configure IPs in different range
>>> apart from the default CIDR.(Eg - connecting to different network over
>>> MPLS) meaning one guest VM will have two network one towards to public
>> with
>>> default CIDR and other network towards to MPLS on different IP range, is
>>> that possible if so could you please assist me on this.
>>>
>>> Thanks
>>> AR
>>>
>>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <ki...@gmail.com>
>>> wrote:
>>>
>>>> Hi, as I said before you may still be required to input an IP range when
>>>> creating the network, but it won't be used if DHCP is disabled for the
>>>> network. So just input any IP range when creating the network and then
>>>> configure the desired IP address in the VM.
>>>>
>>>> Best regards,
>>>> Kirk
>>>>
>>>>
>>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
>>>>> Hi Kirk
>>>>>
>>>>> Thanks for your response
>>>>> I have tried creating service offering without dhcp but while creating
>>>>> guest network its forcing me to mention IP range. My requirement is
>>>> that i
>>>>> will get only 1 IP from each branch network that I have to configure in
>>>>> guest VM directly. In the branch network switch is created with
>> multiple
>>>> L2
>>>>> vlans. Please guide me how to setup this network.
>>>>>
>>>>> I hope you have seen my model network diagram which i have uploaded in
>>>>> google drive.
>>>>>
>>>>> Thx in advance
>>>>> AR.
>>>>> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com> wrote:
>>>>>
>>>>>> Hi, if you don't want DHCP for your branch office network you need to
>>>>>> create a Network Offering without DHCP and select that offering when
>>>>>> adding the network in CloudStack. You may still be required to input
>> an
>>>>>> IP range when creating the network, but CloudStack won't be able to
>>>>>> assign the IPs with DHCP disabled.
>>>>>>
>>>>>> Best regards,
>>>>>> Kirk
>>>>>>
>>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
>>>>>>> Hi All,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I am new to Cloudstack I would required your help to achieve my
>>>> advanced
>>>>>>> networking configuration. right now I am using CS-4.4.0 management
>>>> server
>>>>>>> with Mysql DB on it. I have 2 computing server with multiple NICs to
>>>> test
>>>>>>> my environment. As per the study guide I could able to test all the
>>>>>>> functionality except my topology point view. Basically I would need
>> my
>>>>>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM
>> to
>>>>>> VM
>>>>>>> communication and other Physical NIC (eth1) for my branch office
>>>>>>> connectivity without configuring gateway on the interface. I will
>>>>>> manually
>>>>>>> add route on the VM. I have tried all the possibility ways with my
>> poor
>>>>>>> knowledge on the CS I could not able to add guest network without
>>>>>>> mentioning IP range on the UI also cloudmonkey. I want to configure
>>>> IPs
>>>>>> on
>>>>>>> the eth1 nic (Branch network) manually without getting IPs from DHCP,
>>>>>> could
>>>>>>> someone please guide me on this. We are already running similar
>> setup
>>>> on
>>>>>>> VMware I hope this can be done on cloudstack as well.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Configuration details.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Management Server / computing server is running on Ubuntu detail are
>>>>>> below.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Distributor ID: Ubuntu
>>>>>>>
>>>>>>> Description: Ubuntu 12.04.5 LTS
>>>>>>>
>>>>>>> Release: 12.04
>>>>>>>
>>>>>>> Codename: precise
>>>>>>>
>>>>>>> Virtualization is on = KVM
>>>>>>>
>>>>>>> Guest VM OS = Windows -7, CentOS
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I have attached detailed diagram for your better understanding,
>> please
>>>>>> help
>>>>>>> me to configure my scenario.
>>>>>>>
>>>>>>>
>>>>>>> Please find this below link for network diagram.
>>>>>>>
>>>>>>>
>>>>>>
>>>>
>> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thanks in Advance.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Abdul Rasool.
>>>>>>>
>>>>>>> +91 98865 18767
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
Hi Kirk,
I think we both are not on the same page, could you please go through my
below emails and let me know is my question is clear to you. if so please
help to configure this scenario.
Thanks in advance.
AR
On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <ki...@gmail.com>
wrote:
> Hi, all VM configuration needs to be done in CloudStack, otherwise it
> will be undone by CloudStack under various common circumstance (reboot,
> stop/start, etc.).
>
> Best regards,
> Kirk
>
> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> > Hi Kirk
> >
> > Thanks for your reply,
> >
> > adding to some more points on the same case I want to add additional
> > physical NIC to VM without mention IPs and service offering from
> cloudstack
> > is that possible ?. in my case I have 1 VM which has public NIC and need
> > one more additional physical NIC for internal use. on the WAN side every
> > thing is working as expected in the same VM I would need to add one more
> > physical NIC which I need to manually configure IPs in different range
> > apart from the default CIDR.(Eg - connecting to different network over
> > MPLS) meaning one guest VM will have two network one towards to public
> with
> > default CIDR and other network towards to MPLS on different IP range, is
> > that possible if so could you please assist me on this.
> >
> > Thanks
> > AR
> >
> > On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <ki...@gmail.com>
> > wrote:
> >
> >> Hi, as I said before you may still be required to input an IP range when
> >> creating the network, but it won't be used if DHCP is disabled for the
> >> network. So just input any IP range when creating the network and then
> >> configure the desired IP address in the VM.
> >>
> >> Best regards,
> >> Kirk
> >>
> >>
> >> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> >>> Hi Kirk
> >>>
> >>> Thanks for your response
> >>> I have tried creating service offering without dhcp but while creating
> >>> guest network its forcing me to mention IP range. My requirement is
> >> that i
> >>> will get only 1 IP from each branch network that I have to configure in
> >>> guest VM directly. In the branch network switch is created with
> multiple
> >> L2
> >>> vlans. Please guide me how to setup this network.
> >>>
> >>> I hope you have seen my model network diagram which i have uploaded in
> >>> google drive.
> >>>
> >>> Thx in advance
> >>> AR.
> >>> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com> wrote:
> >>>
> >>>> Hi, if you don't want DHCP for your branch office network you need to
> >>>> create a Network Offering without DHCP and select that offering when
> >>>> adding the network in CloudStack. You may still be required to input
> an
> >>>> IP range when creating the network, but CloudStack won't be able to
> >>>> assign the IPs with DHCP disabled.
> >>>>
> >>>> Best regards,
> >>>> Kirk
> >>>>
> >>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> >>>>> Hi All,
> >>>>>
> >>>>>
> >>>>>
> >>>>> I am new to Cloudstack I would required your help to achieve my
> >> advanced
> >>>>> networking configuration. right now I am using CS-4.4.0 management
> >> server
> >>>>> with Mysql DB on it. I have 2 computing server with multiple NICs to
> >> test
> >>>>> my environment. As per the study guide I could able to test all the
> >>>>> functionality except my topology point view. Basically I would need
> my
> >>>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM
> to
> >>>> VM
> >>>>> communication and other Physical NIC (eth1) for my branch office
> >>>>> connectivity without configuring gateway on the interface. I will
> >>>> manually
> >>>>> add route on the VM. I have tried all the possibility ways with my
> poor
> >>>>> knowledge on the CS I could not able to add guest network without
> >>>>> mentioning IP range on the UI also cloudmonkey. I want to configure
> >> IPs
> >>>> on
> >>>>> the eth1 nic (Branch network) manually without getting IPs from DHCP,
> >>>> could
> >>>>> someone please guide me on this. We are already running similar
> setup
> >> on
> >>>>> VMware I hope this can be done on cloudstack as well.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Configuration details.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Management Server / computing server is running on Ubuntu detail are
> >>>> below.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Distributor ID: Ubuntu
> >>>>>
> >>>>> Description: Ubuntu 12.04.5 LTS
> >>>>>
> >>>>> Release: 12.04
> >>>>>
> >>>>> Codename: precise
> >>>>>
> >>>>> Virtualization is on = KVM
> >>>>>
> >>>>> Guest VM OS = Windows -7, CentOS
> >>>>>
> >>>>>
> >>>>>
> >>>>> I have attached detailed diagram for your better understanding,
> please
> >>>> help
> >>>>> me to configure my scenario.
> >>>>>
> >>>>>
> >>>>> Please find this below link for network diagram.
> >>>>>
> >>>>>
> >>>>
> >>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >>>>>
> >>>>>
> >>>>>
> >>>>> Thanks in Advance.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Abdul Rasool.
> >>>>>
> >>>>> +91 98865 18767
> >>>>>
> >>>>
> >>>
> >>
> >
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Kirk Kosinski <ki...@gmail.com>.
Hi, all VM configuration needs to be done in CloudStack, otherwise it
will be undone by CloudStack under various common circumstance (reboot,
stop/start, etc.).
Best regards,
Kirk
On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> Hi Kirk
>
> Thanks for your reply,
>
> adding to some more points on the same case I want to add additional
> physical NIC to VM without mention IPs and service offering from cloudstack
> is that possible ?. in my case I have 1 VM which has public NIC and need
> one more additional physical NIC for internal use. on the WAN side every
> thing is working as expected in the same VM I would need to add one more
> physical NIC which I need to manually configure IPs in different range
> apart from the default CIDR.(Eg - connecting to different network over
> MPLS) meaning one guest VM will have two network one towards to public with
> default CIDR and other network towards to MPLS on different IP range, is
> that possible if so could you please assist me on this.
>
> Thanks
> AR
>
> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <ki...@gmail.com>
> wrote:
>
>> Hi, as I said before you may still be required to input an IP range when
>> creating the network, but it won't be used if DHCP is disabled for the
>> network. So just input any IP range when creating the network and then
>> configure the desired IP address in the VM.
>>
>> Best regards,
>> Kirk
>>
>>
>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
>>> Hi Kirk
>>>
>>> Thanks for your response
>>> I have tried creating service offering without dhcp but while creating
>>> guest network its forcing me to mention IP range. My requirement is
>> that i
>>> will get only 1 IP from each branch network that I have to configure in
>>> guest VM directly. In the branch network switch is created with multiple
>> L2
>>> vlans. Please guide me how to setup this network.
>>>
>>> I hope you have seen my model network diagram which i have uploaded in
>>> google drive.
>>>
>>> Thx in advance
>>> AR.
>>> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com> wrote:
>>>
>>>> Hi, if you don't want DHCP for your branch office network you need to
>>>> create a Network Offering without DHCP and select that offering when
>>>> adding the network in CloudStack. You may still be required to input an
>>>> IP range when creating the network, but CloudStack won't be able to
>>>> assign the IPs with DHCP disabled.
>>>>
>>>> Best regards,
>>>> Kirk
>>>>
>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
>>>>> Hi All,
>>>>>
>>>>>
>>>>>
>>>>> I am new to Cloudstack I would required your help to achieve my
>> advanced
>>>>> networking configuration. right now I am using CS-4.4.0 management
>> server
>>>>> with Mysql DB on it. I have 2 computing server with multiple NICs to
>> test
>>>>> my environment. As per the study guide I could able to test all the
>>>>> functionality except my topology point view. Basically I would need my
>>>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to
>>>> VM
>>>>> communication and other Physical NIC (eth1) for my branch office
>>>>> connectivity without configuring gateway on the interface. I will
>>>> manually
>>>>> add route on the VM. I have tried all the possibility ways with my poor
>>>>> knowledge on the CS I could not able to add guest network without
>>>>> mentioning IP range on the UI also cloudmonkey. I want to configure
>> IPs
>>>> on
>>>>> the eth1 nic (Branch network) manually without getting IPs from DHCP,
>>>> could
>>>>> someone please guide me on this. We are already running similar setup
>> on
>>>>> VMware I hope this can be done on cloudstack as well.
>>>>>
>>>>>
>>>>>
>>>>> Configuration details.
>>>>>
>>>>>
>>>>>
>>>>> Management Server / computing server is running on Ubuntu detail are
>>>> below.
>>>>>
>>>>>
>>>>>
>>>>> Distributor ID: Ubuntu
>>>>>
>>>>> Description: Ubuntu 12.04.5 LTS
>>>>>
>>>>> Release: 12.04
>>>>>
>>>>> Codename: precise
>>>>>
>>>>> Virtualization is on = KVM
>>>>>
>>>>> Guest VM OS = Windows -7, CentOS
>>>>>
>>>>>
>>>>>
>>>>> I have attached detailed diagram for your better understanding, please
>>>> help
>>>>> me to configure my scenario.
>>>>>
>>>>>
>>>>> Please find this below link for network diagram.
>>>>>
>>>>>
>>>>
>> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
>>>>>
>>>>>
>>>>>
>>>>> Thanks in Advance.
>>>>>
>>>>>
>>>>>
>>>>> Abdul Rasool.
>>>>>
>>>>> +91 98865 18767
>>>>>
>>>>
>>>
>>
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
Hi Kirk
Thanks for your reply,
adding to some more points on the same case I want to add additional
physical NIC to VM without mention IPs and service offering from cloudstack
is that possible ?. in my case I have 1 VM which has public NIC and need
one more additional physical NIC for internal use. on the WAN side every
thing is working as expected in the same VM I would need to add one more
physical NIC which I need to manually configure IPs in different range
apart from the default CIDR.(Eg - connecting to different network over
MPLS) meaning one guest VM will have two network one towards to public with
default CIDR and other network towards to MPLS on different IP range, is
that possible if so could you please assist me on this.
Thanks
AR
On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <ki...@gmail.com>
wrote:
> Hi, as I said before you may still be required to input an IP range when
> creating the network, but it won't be used if DHCP is disabled for the
> network. So just input any IP range when creating the network and then
> configure the desired IP address in the VM.
>
> Best regards,
> Kirk
>
>
> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> > Hi Kirk
> >
> > Thanks for your response
> > I have tried creating service offering without dhcp but while creating
> > guest network its forcing me to mention IP range. My requirement is
> that i
> > will get only 1 IP from each branch network that I have to configure in
> > guest VM directly. In the branch network switch is created with multiple
> L2
> > vlans. Please guide me how to setup this network.
> >
> > I hope you have seen my model network diagram which i have uploaded in
> > google drive.
> >
> > Thx in advance
> > AR.
> > On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com> wrote:
> >
> >> Hi, if you don't want DHCP for your branch office network you need to
> >> create a Network Offering without DHCP and select that offering when
> >> adding the network in CloudStack. You may still be required to input an
> >> IP range when creating the network, but CloudStack won't be able to
> >> assign the IPs with DHCP disabled.
> >>
> >> Best regards,
> >> Kirk
> >>
> >> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> >>> Hi All,
> >>>
> >>>
> >>>
> >>> I am new to Cloudstack I would required your help to achieve my
> advanced
> >>> networking configuration. right now I am using CS-4.4.0 management
> server
> >>> with Mysql DB on it. I have 2 computing server with multiple NICs to
> test
> >>> my environment. As per the study guide I could able to test all the
> >>> functionality except my topology point view. Basically I would need my
> >>> guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to
> >> VM
> >>> communication and other Physical NIC (eth1) for my branch office
> >>> connectivity without configuring gateway on the interface. I will
> >> manually
> >>> add route on the VM. I have tried all the possibility ways with my poor
> >>> knowledge on the CS I could not able to add guest network without
> >>> mentioning IP range on the UI also cloudmonkey. I want to configure
> IPs
> >> on
> >>> the eth1 nic (Branch network) manually without getting IPs from DHCP,
> >> could
> >>> someone please guide me on this. We are already running similar setup
> on
> >>> VMware I hope this can be done on cloudstack as well.
> >>>
> >>>
> >>>
> >>> Configuration details.
> >>>
> >>>
> >>>
> >>> Management Server / computing server is running on Ubuntu detail are
> >> below.
> >>>
> >>>
> >>>
> >>> Distributor ID: Ubuntu
> >>>
> >>> Description: Ubuntu 12.04.5 LTS
> >>>
> >>> Release: 12.04
> >>>
> >>> Codename: precise
> >>>
> >>> Virtualization is on = KVM
> >>>
> >>> Guest VM OS = Windows -7, CentOS
> >>>
> >>>
> >>>
> >>> I have attached detailed diagram for your better understanding, please
> >> help
> >>> me to configure my scenario.
> >>>
> >>>
> >>> Please find this below link for network diagram.
> >>>
> >>>
> >>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >>>
> >>>
> >>>
> >>> Thanks in Advance.
> >>>
> >>>
> >>>
> >>> Abdul Rasool.
> >>>
> >>> +91 98865 18767
> >>>
> >>
> >
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Kirk Kosinski <ki...@gmail.com>.
Hi, as I said before you may still be required to input an IP range when
creating the network, but it won't be used if DHCP is disabled for the
network. So just input any IP range when creating the network and then
configure the desired IP address in the VM.
Best regards,
Kirk
On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> Hi Kirk
>
> Thanks for your response
> I have tried creating service offering without dhcp but while creating
> guest network its forcing me to mention IP range. My requirement is that i
> will get only 1 IP from each branch network that I have to configure in
> guest VM directly. In the branch network switch is created with multiple L2
> vlans. Please guide me how to setup this network.
>
> I hope you have seen my model network diagram which i have uploaded in
> google drive.
>
> Thx in advance
> AR.
> On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com> wrote:
>
>> Hi, if you don't want DHCP for your branch office network you need to
>> create a Network Offering without DHCP and select that offering when
>> adding the network in CloudStack. You may still be required to input an
>> IP range when creating the network, but CloudStack won't be able to
>> assign the IPs with DHCP disabled.
>>
>> Best regards,
>> Kirk
>>
>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
>>> Hi All,
>>>
>>>
>>>
>>> I am new to Cloudstack I would required your help to achieve my advanced
>>> networking configuration. right now I am using CS-4.4.0 management server
>>> with Mysql DB on it. I have 2 computing server with multiple NICs to test
>>> my environment. As per the study guide I could able to test all the
>>> functionality except my topology point view. Basically I would need my
>>> guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to
>> VM
>>> communication and other Physical NIC (eth1) for my branch office
>>> connectivity without configuring gateway on the interface. I will
>> manually
>>> add route on the VM. I have tried all the possibility ways with my poor
>>> knowledge on the CS I could not able to add guest network without
>>> mentioning IP range on the UI also cloudmonkey. I want to configure IPs
>> on
>>> the eth1 nic (Branch network) manually without getting IPs from DHCP,
>> could
>>> someone please guide me on this. We are already running similar setup on
>>> VMware I hope this can be done on cloudstack as well.
>>>
>>>
>>>
>>> Configuration details.
>>>
>>>
>>>
>>> Management Server / computing server is running on Ubuntu detail are
>> below.
>>>
>>>
>>>
>>> Distributor ID: Ubuntu
>>>
>>> Description: Ubuntu 12.04.5 LTS
>>>
>>> Release: 12.04
>>>
>>> Codename: precise
>>>
>>> Virtualization is on = KVM
>>>
>>> Guest VM OS = Windows -7, CentOS
>>>
>>>
>>>
>>> I have attached detailed diagram for your better understanding, please
>> help
>>> me to configure my scenario.
>>>
>>>
>>> Please find this below link for network diagram.
>>>
>>>
>> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
>>>
>>>
>>>
>>> Thanks in Advance.
>>>
>>>
>>>
>>> Abdul Rasool.
>>>
>>> +91 98865 18767
>>>
>>
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
Hi Kirk
Thanks for your response
I have tried creating service offering without dhcp but while creating
guest network its forcing me to mention IP range. My requirement is that i
will get only 1 IP from each branch network that I have to configure in
guest VM directly. In the branch network switch is created with multiple L2
vlans. Please guide me how to setup this network.
I hope you have seen my model network diagram which i have uploaded in
google drive.
Thx in advance
AR.
On 10 Oct 2014 22:42, "Kirk Kosinski" <ki...@gmail.com> wrote:
> Hi, if you don't want DHCP for your branch office network you need to
> create a Network Offering without DHCP and select that offering when
> adding the network in CloudStack. You may still be required to input an
> IP range when creating the network, but CloudStack won't be able to
> assign the IPs with DHCP disabled.
>
> Best regards,
> Kirk
>
> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> > Hi All,
> >
> >
> >
> > I am new to Cloudstack I would required your help to achieve my advanced
> > networking configuration. right now I am using CS-4.4.0 management server
> > with Mysql DB on it. I have 2 computing server with multiple NICs to test
> > my environment. As per the study guide I could able to test all the
> > functionality except my topology point view. Basically I would need my
> > guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to
> VM
> > communication and other Physical NIC (eth1) for my branch office
> > connectivity without configuring gateway on the interface. I will
> manually
> > add route on the VM. I have tried all the possibility ways with my poor
> > knowledge on the CS I could not able to add guest network without
> > mentioning IP range on the UI also cloudmonkey. I want to configure IPs
> on
> > the eth1 nic (Branch network) manually without getting IPs from DHCP,
> could
> > someone please guide me on this. We are already running similar setup on
> > VMware I hope this can be done on cloudstack as well.
> >
> >
> >
> > Configuration details.
> >
> >
> >
> > Management Server / computing server is running on Ubuntu detail are
> below.
> >
> >
> >
> > Distributor ID: Ubuntu
> >
> > Description: Ubuntu 12.04.5 LTS
> >
> > Release: 12.04
> >
> > Codename: precise
> >
> > Virtualization is on = KVM
> >
> > Guest VM OS = Windows -7, CentOS
> >
> >
> >
> > I have attached detailed diagram for your better understanding, please
> help
> > me to configure my scenario.
> >
> >
> > Please find this below link for network diagram.
> >
> >
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >
> >
> >
> > Thanks in Advance.
> >
> >
> >
> > Abdul Rasool.
> >
> > +91 98865 18767
> >
>
Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Kirk Kosinski <ki...@gmail.com>.
Hi, if you don't want DHCP for your branch office network you need to
create a Network Offering without DHCP and select that offering when
adding the network in CloudStack. You may still be required to input an
IP range when creating the network, but CloudStack won't be able to
assign the IPs with DHCP disabled.
Best regards,
Kirk
On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> Hi All,
>
>
>
> I am new to Cloudstack I would required your help to achieve my advanced
> networking configuration. right now I am using CS-4.4.0 management server
> with Mysql DB on it. I have 2 computing server with multiple NICs to test
> my environment. As per the study guide I could able to test all the
> functionality except my topology point view. Basically I would need my
> guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to VM
> communication and other Physical NIC (eth1) for my branch office
> connectivity without configuring gateway on the interface. I will manually
> add route on the VM. I have tried all the possibility ways with my poor
> knowledge on the CS I could not able to add guest network without
> mentioning IP range on the UI also cloudmonkey. I want to configure IPs on
> the eth1 nic (Branch network) manually without getting IPs from DHCP, could
> someone please guide me on this. We are already running similar setup on
> VMware I hope this can be done on cloudstack as well.
>
>
>
> Configuration details.
>
>
>
> Management Server / computing server is running on Ubuntu detail are below.
>
>
>
> Distributor ID: Ubuntu
>
> Description: Ubuntu 12.04.5 LTS
>
> Release: 12.04
>
> Codename: precise
>
> Virtualization is on = KVM
>
> Guest VM OS = Windows -7, CentOS
>
>
>
> I have attached detailed diagram for your better understanding, please help
> me to configure my scenario.
>
>
> Please find this below link for network diagram.
>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
>
>
>
> Thanks in Advance.
>
>
>
> Abdul Rasool.
>
> +91 98865 18767
>
Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
Hi All,
I am new to Cloudstack I would required your help to achieve my advanced
networking configuration. right now I am using CS-4.4.0 management server
with Mysql DB on it. I have 2 computing server with multiple NICs to test
my environment. As per the study guide I could able to test all the
functionality except my topology point view. Basically I would need my
guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to VM
communication and other Physical NIC (eth1) for my branch office
connectivity without configuring gateway on the interface. I will manually
add route on the VM. I have tried all the possibility ways with my poor
knowledge on the CS I could not able to add guest network without
mentioning IP range on the UI also cloudmonkey. I want to configure IPs on
the eth1 nic (Branch network) manually without getting IPs from DHCP, could
someone please guide me on this. We are already running similar setup on
VMware I hope this can be done on cloudstack as well.
Configuration details.
Management Server / computing server is running on Ubuntu detail are below.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.5 LTS
Release: 12.04
Codename: precise
Virtualization is on = KVM
Guest VM OS = Windows -7, CentOS
I have attached detailed diagram for your better understanding, please help
me to configure my scenario.
Please find this below link for network diagram.
https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
Thanks in Advance.
Abdul Rasool.
+91 98865 18767
Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Posted by Abdul Rasool <ra...@gmail.com>.
Hi All,
I am new to Cloudstack I would required your help to achieve my advanced
networking configuration. right now I am using CS-4.4.0 management server
with Mysql DB on it. I have 2 computing server with multiple NICs to test
my environment. As per the study guide I could able to test all the
functionality except my topology point view. Basically I would need my
guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to VM
communication and other Physical NIC (eth1) for my branch office
connectivity without configuring gateway on the interface. I will manually
add route on the VM. I have tried all the possibility ways with my poor
knowledge on the CS I could not able to add guest network without
mentioning IP range on the UI also cloudmonkey. I want to configure IPs on
the eth1 nic (Branch network) manually without getting IPs from DHCP, could
someone please guide me on this. We are already running similar setup on
VMware I hope this can be done on cloudstack as well.
Configuration details.
Management Server / computing server is running on Ubuntu detail are below.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.5 LTS
Release: 12.04
Codename: precise
Virtualization is on = KVM
Guest VM OS = Windows -7, CentOS
I have attached detailed diagram for your better understanding, please help
me to configure my scenario.
Thanks in Advance.
Abdul Rasool.
+91 98865 18767