You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@ripple.apache.org by Marc Luria <ma...@luria.net> on 2013/09/10 01:46:28 UTC
ripple problem
using 0.9.18 in Chrome I'm getting the following error:
XMLHttpRequest cannot load
Origin http:/ <http://gamechat/>/mysite is not allowed by
Access-Control-Allow-Origin
using 0.9.18 in Chrome I'm getting the following error:
I don't think I've changed anything, though maybe Chrome updated, it was
working well before. I tried going back a few versions of chrome and had
the same problem.
Makes it hard to use AJAX.
Any help or workaround would be appreciated.
Re: ripple problem
Posted by Gord Tanner <gt...@gmail.com>.
+1 to Dan's idea
Use the npm version and host ripple that way:
ripple emulate --path ~/path/to/your/app
or direct it to a remote server
ripple emulate --remote http://localhost:3000/
On Tue, Sep 10, 2013 at 10:38 AM, Marc Luria <ma...@luria.net> wrote:
> I tried --disable-web-security and it didn't work. According to what I've
> read on other sites only works on earlier versions of Chrome. I tried
> installing an earlier version, but it didn't make a difference. Also,
> Chrome since it reinstalls itself.
>
> Does anyone know what is the last version of Chrome that supports
> --disable-web-security?
>
> m
>
>
>
>
>
> On Tue, Sep 10, 2013 at 9:02 AM, Mayr Gregor <G....@cadenas.de> wrote:
>
> > Try starting Chrome with "--disable-web-security" Parameter.
> > This should allow you to do cross domain requests.
> > Otherwise you could put your origin into your server's
> > Access-Control-Allow-Origin header.
> >
> >
> > -----Ursprüngliche Nachricht-----
> > Von: Marc Luria [mailto:marc@luria.net]
> > Gesendet: Dienstag, 10. September 2013 01:46
> > An: dev@ripple.incubator.apache.org
> > Betreff: ripple problem
> >
> > using 0.9.18 in Chrome I'm getting the following error:
> >
> > XMLHttpRequest cannot load
> >
> > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > Access-Control-Allow-Origin
> >
> > using 0.9.18 in Chrome I'm getting the following error:
> >
> > I don't think I've changed anything, though maybe Chrome updated, it was
> > working well before. I tried going back a few versions of chrome and had
> > the same problem.
> >
> > Makes it hard to use AJAX.
> >
> > Any help or workaround would be appreciated.
> >
>
Re: ripple problem
Posted by Marc Luria <ma...@luria.net>.
I tried --disable-web-security and it didn't work. According to what I've
read on other sites only works on earlier versions of Chrome. I tried
installing an earlier version, but it didn't make a difference. Also,
Chrome since it reinstalls itself.
Does anyone know what is the last version of Chrome that supports
--disable-web-security?
m
On Tue, Sep 10, 2013 at 9:02 AM, Mayr Gregor <G....@cadenas.de> wrote:
> Try starting Chrome with "--disable-web-security" Parameter.
> This should allow you to do cross domain requests.
> Otherwise you could put your origin into your server's
> Access-Control-Allow-Origin header.
>
>
> -----Ursprüngliche Nachricht-----
> Von: Marc Luria [mailto:marc@luria.net]
> Gesendet: Dienstag, 10. September 2013 01:46
> An: dev@ripple.incubator.apache.org
> Betreff: ripple problem
>
> using 0.9.18 in Chrome I'm getting the following error:
>
> XMLHttpRequest cannot load
>
> Origin http:/ <http://gamechat/>/mysite is not allowed by
> Access-Control-Allow-Origin
>
> using 0.9.18 in Chrome I'm getting the following error:
>
> I don't think I've changed anything, though maybe Chrome updated, it was
> working well before. I tried going back a few versions of chrome and had
> the same problem.
>
> Makes it hard to use AJAX.
>
> Any help or workaround would be appreciated.
>
Re: ripple problem
Posted by Marc Luria <ma...@luria.net>.
How do I set the route and the port?
On Tue, Sep 10, 2013 at 5:54 PM, Dan Silivestru <da...@gmail.com>wrote:
> Hi Marc,
>
> You're in the right spot. Just pick Local and make sure your route and port
> are correct. You will see the value for those once your run the following
> command in the console (assuming you've installed npm ripple-emulator)
>
> The command is:
>
> ripple proxy
>
> Cheers,
>
> Dan.
>
>
> On Tue, Sep 10, 2013 at 10:50 AM, Marc Luria <ma...@luria.net> wrote:
>
> > I am now using 0.9.18 based on Brent's suggestion.
> >
> > How do I go to the setttings pane? The settings pane I see in ripple
> has a
> > field Cross Domain Proxy which is set to Remote. The other two settings
> > are Disabled and Local.
> >
> >
> >
> > m
> >
> >
> >
> > On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <
> dan.silivestru@gmail.com
> > >wrote:
> >
> > > You can also try installing the ripple from npm:
> > > https://npmjs.org/package/ripple-emulator
> > >
> > > Once it's installed globally just rung the ripple proxy command over
> your
> > > project's directory and in Ripple, go to the settings pane and change
> > your
> > > cross origin proxy settings to point to your local instance.
> > >
> > >
> > > On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <G....@cadenas.de>
> wrote:
> > >
> > > > Try starting Chrome with "--disable-web-security" Parameter.
> > > > This should allow you to do cross domain requests.
> > > > Otherwise you could put your origin into your server's
> > > > Access-Control-Allow-Origin header.
> > > >
> > > >
> > > > -----Ursprüngliche Nachricht-----
> > > > Von: Marc Luria [mailto:marc@luria.net]
> > > > Gesendet: Dienstag, 10. September 2013 01:46
> > > > An: dev@ripple.incubator.apache.org
> > > > Betreff: ripple problem
> > > >
> > > > using 0.9.18 in Chrome I'm getting the following error:
> > > >
> > > > XMLHttpRequest cannot load
> > > >
> > > > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > > > Access-Control-Allow-Origin
> > > >
> > > > using 0.9.18 in Chrome I'm getting the following error:
> > > >
> > > > I don't think I've changed anything, though maybe Chrome updated, it
> > was
> > > > working well before. I tried going back a few versions of chrome and
> > had
> > > > the same problem.
> > > >
> > > > Makes it hard to use AJAX.
> > > >
> > > > Any help or workaround would be appreciated.
> > > >
> > >
> > >
> > >
> > > --
> > > Dan Silivestru
> > > +1 (519) 589-3624
> > >
> >
>
>
>
> --
> Dan Silivestru
> +1 (519) 589-3624
>
Re: ripple problem
Posted by Dan Silivestru <da...@gmail.com>.
Oh oops, ignore that. Its for a feature that hasn't been released yet ;)
Dan Silivestru
1 (519) 589-3624
On Sep 10, 2013 12:11 PM, "Marc Luria" <ma...@luria.net> wrote:
> I'm using a pc. I'll try and see if it works.
>
> What do you mean:
>
> Right :-) But don't forget to disable Ripple if you also have it running
> as an
> extension.
>
>
>
>
> On Tue, Sep 10, 2013 at 6:45 PM, Dan Silivestru <dan.silivestru@gmail.com
> >wrote:
>
> > Hey,
> >
> > Ok, here's the step by step. Sorry, sometimes Gord and I assume everyone
> is
> > as familiar with Ripple as we are :)
> >
> > This is assuming you're on a Mac.
> >
> >
> > 1. Open the terminal
> > 2. type in: npm install -g ripple-emulator
> > 3. navigate to your project directory
> > 4. type in: ripple emulate
> > 5. you should see something like this in the console:
> > - INFO: Server instance running on: http://localhost:4400
> > - INFO: CORS XHR proxy service on:
> > http://localhost:4400/ripple/xhr_proxy
> > - INFO: JSONP XHR proxy service on:
> > http://localhost:4400/ripple/jsonp_xhr_proxy
> > 6. The port is 4400
> > 7. The route is ripple
> > 8. go to http://localhost:4400
> > 9. Enable Ripple over the page
> > 10. Expand the Settings pane
> > 11. Select Local as the option for the Cross Origin Proxy
> > 12. Make sure that the port and the route match whats in #6 and #7
> > 13. Test away
> >
> > That should work for you.
> >
> > Cheers,
> >
> > Dan.
> >
> >
> >
> > On Tue, Sep 10, 2013 at 11:35 AM, Marc Luria <ma...@luria.net> wrote:
> >
> > > I think I have it only running as a Chrome extension.
> > >
> > >
> > > On Tue, Sep 10, 2013 at 6:11 PM, Dan Silivestru <
> > dan.silivestru@gmail.com
> > > >wrote:
> > >
> > > > Right :-) But don't forget to disable Ripple if you also have it
> > running
> > > as
> > > > an extension.
> > > >
> > > >
> > > >
> > > >
> > > > On Tue, Sep 10, 2013 at 11:01 AM, Gord Tanner <gt...@gmail.com>
> > wrote:
> > > >
> > > > > also ripple emulate will start a local proxy for you
> > > > >
> > > > >
> > > > > On Tue, Sep 10, 2013 at 10:54 AM, Dan Silivestru
> > > > > <da...@gmail.com>wrote:
> > > > >
> > > > > > Hi Marc,
> > > > > >
> > > > > > You're in the right spot. Just pick Local and make sure your
> route
> > > and
> > > > > port
> > > > > > are correct. You will see the value for those once your run the
> > > > following
> > > > > > command in the console (assuming you've installed npm
> > > ripple-emulator)
> > > > > >
> > > > > > The command is:
> > > > > >
> > > > > > ripple proxy
> > > > > >
> > > > > > Cheers,
> > > > > >
> > > > > > Dan.
> > > > > >
> > > > > >
> > > > > > On Tue, Sep 10, 2013 at 10:50 AM, Marc Luria <ma...@luria.net>
> > wrote:
> > > > > >
> > > > > > > I am now using 0.9.18 based on Brent's suggestion.
> > > > > > >
> > > > > > > How do I go to the setttings pane? The settings pane I see in
> > > ripple
> > > > > > has a
> > > > > > > field Cross Domain Proxy which is set to Remote. The other two
> > > > > settings
> > > > > > > are Disabled and Local.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > m
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <
> > > > > > dan.silivestru@gmail.com
> > > > > > > >wrote:
> > > > > > >
> > > > > > > > You can also try installing the ripple from npm:
> > > > > > > > https://npmjs.org/package/ripple-emulator
> > > > > > > >
> > > > > > > > Once it's installed globally just rung the ripple proxy
> command
> > > > over
> > > > > > your
> > > > > > > > project's directory and in Ripple, go to the settings pane
> and
> > > > change
> > > > > > > your
> > > > > > > > cross origin proxy settings to point to your local instance.
> > > > > > > >
> > > > > > > >
> > > > > > > > On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <
> > G.Mayr@cadenas.de>
> > > > > > wrote:
> > > > > > > >
> > > > > > > > > Try starting Chrome with "--disable-web-security"
> Parameter.
> > > > > > > > > This should allow you to do cross domain requests.
> > > > > > > > > Otherwise you could put your origin into your server's
> > > > > > > > > Access-Control-Allow-Origin header.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > -----Ursprüngliche Nachricht-----
> > > > > > > > > Von: Marc Luria [mailto:marc@luria.net]
> > > > > > > > > Gesendet: Dienstag, 10. September 2013 01:46
> > > > > > > > > An: dev@ripple.incubator.apache.org
> > > > > > > > > Betreff: ripple problem
> > > > > > > > >
> > > > > > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > > > > > >
> > > > > > > > > XMLHttpRequest cannot load
> > > > > > > > >
> > > > > > > > > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > > > > > > > > Access-Control-Allow-Origin
> > > > > > > > >
> > > > > > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > > > > > >
> > > > > > > > > I don't think I've changed anything, though maybe Chrome
> > > updated,
> > > > > it
> > > > > > > was
> > > > > > > > > working well before. I tried going back a few versions of
> > > chrome
> > > > > and
> > > > > > > had
> > > > > > > > > the same problem.
> > > > > > > > >
> > > > > > > > > Makes it hard to use AJAX.
> > > > > > > > >
> > > > > > > > > Any help or workaround would be appreciated.
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Dan Silivestru
> > > > > > > > +1 (519) 589-3624
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Dan Silivestru
> > > > > > +1 (519) 589-3624
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Dan Silivestru
> > > > +1 (519) 589-3624
> > > >
> > >
> >
> >
> >
> > --
> > Dan Silivestru
> > +1 (519) 589-3624
> >
>
Re: ripple problem
Posted by Marc Luria <ma...@luria.net>.
I'm using a pc. I'll try and see if it works.
What do you mean:
Right :-) But don't forget to disable Ripple if you also have it running as an
extension.
On Tue, Sep 10, 2013 at 6:45 PM, Dan Silivestru <da...@gmail.com>wrote:
> Hey,
>
> Ok, here's the step by step. Sorry, sometimes Gord and I assume everyone is
> as familiar with Ripple as we are :)
>
> This is assuming you're on a Mac.
>
>
> 1. Open the terminal
> 2. type in: npm install -g ripple-emulator
> 3. navigate to your project directory
> 4. type in: ripple emulate
> 5. you should see something like this in the console:
> - INFO: Server instance running on: http://localhost:4400
> - INFO: CORS XHR proxy service on:
> http://localhost:4400/ripple/xhr_proxy
> - INFO: JSONP XHR proxy service on:
> http://localhost:4400/ripple/jsonp_xhr_proxy
> 6. The port is 4400
> 7. The route is ripple
> 8. go to http://localhost:4400
> 9. Enable Ripple over the page
> 10. Expand the Settings pane
> 11. Select Local as the option for the Cross Origin Proxy
> 12. Make sure that the port and the route match whats in #6 and #7
> 13. Test away
>
> That should work for you.
>
> Cheers,
>
> Dan.
>
>
>
> On Tue, Sep 10, 2013 at 11:35 AM, Marc Luria <ma...@luria.net> wrote:
>
> > I think I have it only running as a Chrome extension.
> >
> >
> > On Tue, Sep 10, 2013 at 6:11 PM, Dan Silivestru <
> dan.silivestru@gmail.com
> > >wrote:
> >
> > > Right :-) But don't forget to disable Ripple if you also have it
> running
> > as
> > > an extension.
> > >
> > >
> > >
> > >
> > > On Tue, Sep 10, 2013 at 11:01 AM, Gord Tanner <gt...@gmail.com>
> wrote:
> > >
> > > > also ripple emulate will start a local proxy for you
> > > >
> > > >
> > > > On Tue, Sep 10, 2013 at 10:54 AM, Dan Silivestru
> > > > <da...@gmail.com>wrote:
> > > >
> > > > > Hi Marc,
> > > > >
> > > > > You're in the right spot. Just pick Local and make sure your route
> > and
> > > > port
> > > > > are correct. You will see the value for those once your run the
> > > following
> > > > > command in the console (assuming you've installed npm
> > ripple-emulator)
> > > > >
> > > > > The command is:
> > > > >
> > > > > ripple proxy
> > > > >
> > > > > Cheers,
> > > > >
> > > > > Dan.
> > > > >
> > > > >
> > > > > On Tue, Sep 10, 2013 at 10:50 AM, Marc Luria <ma...@luria.net>
> wrote:
> > > > >
> > > > > > I am now using 0.9.18 based on Brent's suggestion.
> > > > > >
> > > > > > How do I go to the setttings pane? The settings pane I see in
> > ripple
> > > > > has a
> > > > > > field Cross Domain Proxy which is set to Remote. The other two
> > > > settings
> > > > > > are Disabled and Local.
> > > > > >
> > > > > >
> > > > > >
> > > > > > m
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <
> > > > > dan.silivestru@gmail.com
> > > > > > >wrote:
> > > > > >
> > > > > > > You can also try installing the ripple from npm:
> > > > > > > https://npmjs.org/package/ripple-emulator
> > > > > > >
> > > > > > > Once it's installed globally just rung the ripple proxy command
> > > over
> > > > > your
> > > > > > > project's directory and in Ripple, go to the settings pane and
> > > change
> > > > > > your
> > > > > > > cross origin proxy settings to point to your local instance.
> > > > > > >
> > > > > > >
> > > > > > > On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <
> G.Mayr@cadenas.de>
> > > > > wrote:
> > > > > > >
> > > > > > > > Try starting Chrome with "--disable-web-security" Parameter.
> > > > > > > > This should allow you to do cross domain requests.
> > > > > > > > Otherwise you could put your origin into your server's
> > > > > > > > Access-Control-Allow-Origin header.
> > > > > > > >
> > > > > > > >
> > > > > > > > -----Ursprüngliche Nachricht-----
> > > > > > > > Von: Marc Luria [mailto:marc@luria.net]
> > > > > > > > Gesendet: Dienstag, 10. September 2013 01:46
> > > > > > > > An: dev@ripple.incubator.apache.org
> > > > > > > > Betreff: ripple problem
> > > > > > > >
> > > > > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > > > > >
> > > > > > > > XMLHttpRequest cannot load
> > > > > > > >
> > > > > > > > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > > > > > > > Access-Control-Allow-Origin
> > > > > > > >
> > > > > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > > > > >
> > > > > > > > I don't think I've changed anything, though maybe Chrome
> > updated,
> > > > it
> > > > > > was
> > > > > > > > working well before. I tried going back a few versions of
> > chrome
> > > > and
> > > > > > had
> > > > > > > > the same problem.
> > > > > > > >
> > > > > > > > Makes it hard to use AJAX.
> > > > > > > >
> > > > > > > > Any help or workaround would be appreciated.
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Dan Silivestru
> > > > > > > +1 (519) 589-3624
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Dan Silivestru
> > > > > +1 (519) 589-3624
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Dan Silivestru
> > > +1 (519) 589-3624
> > >
> >
>
>
>
> --
> Dan Silivestru
> +1 (519) 589-3624
>
Re: ripple problem
Posted by Dan Silivestru <da...@gmail.com>.
Hey,
Ok, here's the step by step. Sorry, sometimes Gord and I assume everyone is
as familiar with Ripple as we are :)
This is assuming you're on a Mac.
1. Open the terminal
2. type in: npm install -g ripple-emulator
3. navigate to your project directory
4. type in: ripple emulate
5. you should see something like this in the console:
- INFO: Server instance running on: http://localhost:4400
- INFO: CORS XHR proxy service on:
http://localhost:4400/ripple/xhr_proxy
- INFO: JSONP XHR proxy service on:
http://localhost:4400/ripple/jsonp_xhr_proxy
6. The port is 4400
7. The route is ripple
8. go to http://localhost:4400
9. Enable Ripple over the page
10. Expand the Settings pane
11. Select Local as the option for the Cross Origin Proxy
12. Make sure that the port and the route match whats in #6 and #7
13. Test away
That should work for you.
Cheers,
Dan.
On Tue, Sep 10, 2013 at 11:35 AM, Marc Luria <ma...@luria.net> wrote:
> I think I have it only running as a Chrome extension.
>
>
> On Tue, Sep 10, 2013 at 6:11 PM, Dan Silivestru <dan.silivestru@gmail.com
> >wrote:
>
> > Right :-) But don't forget to disable Ripple if you also have it running
> as
> > an extension.
> >
> >
> >
> >
> > On Tue, Sep 10, 2013 at 11:01 AM, Gord Tanner <gt...@gmail.com> wrote:
> >
> > > also ripple emulate will start a local proxy for you
> > >
> > >
> > > On Tue, Sep 10, 2013 at 10:54 AM, Dan Silivestru
> > > <da...@gmail.com>wrote:
> > >
> > > > Hi Marc,
> > > >
> > > > You're in the right spot. Just pick Local and make sure your route
> and
> > > port
> > > > are correct. You will see the value for those once your run the
> > following
> > > > command in the console (assuming you've installed npm
> ripple-emulator)
> > > >
> > > > The command is:
> > > >
> > > > ripple proxy
> > > >
> > > > Cheers,
> > > >
> > > > Dan.
> > > >
> > > >
> > > > On Tue, Sep 10, 2013 at 10:50 AM, Marc Luria <ma...@luria.net> wrote:
> > > >
> > > > > I am now using 0.9.18 based on Brent's suggestion.
> > > > >
> > > > > How do I go to the setttings pane? The settings pane I see in
> ripple
> > > > has a
> > > > > field Cross Domain Proxy which is set to Remote. The other two
> > > settings
> > > > > are Disabled and Local.
> > > > >
> > > > >
> > > > >
> > > > > m
> > > > >
> > > > >
> > > > >
> > > > > On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <
> > > > dan.silivestru@gmail.com
> > > > > >wrote:
> > > > >
> > > > > > You can also try installing the ripple from npm:
> > > > > > https://npmjs.org/package/ripple-emulator
> > > > > >
> > > > > > Once it's installed globally just rung the ripple proxy command
> > over
> > > > your
> > > > > > project's directory and in Ripple, go to the settings pane and
> > change
> > > > > your
> > > > > > cross origin proxy settings to point to your local instance.
> > > > > >
> > > > > >
> > > > > > On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <G....@cadenas.de>
> > > > wrote:
> > > > > >
> > > > > > > Try starting Chrome with "--disable-web-security" Parameter.
> > > > > > > This should allow you to do cross domain requests.
> > > > > > > Otherwise you could put your origin into your server's
> > > > > > > Access-Control-Allow-Origin header.
> > > > > > >
> > > > > > >
> > > > > > > -----Ursprüngliche Nachricht-----
> > > > > > > Von: Marc Luria [mailto:marc@luria.net]
> > > > > > > Gesendet: Dienstag, 10. September 2013 01:46
> > > > > > > An: dev@ripple.incubator.apache.org
> > > > > > > Betreff: ripple problem
> > > > > > >
> > > > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > > > >
> > > > > > > XMLHttpRequest cannot load
> > > > > > >
> > > > > > > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > > > > > > Access-Control-Allow-Origin
> > > > > > >
> > > > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > > > >
> > > > > > > I don't think I've changed anything, though maybe Chrome
> updated,
> > > it
> > > > > was
> > > > > > > working well before. I tried going back a few versions of
> chrome
> > > and
> > > > > had
> > > > > > > the same problem.
> > > > > > >
> > > > > > > Makes it hard to use AJAX.
> > > > > > >
> > > > > > > Any help or workaround would be appreciated.
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Dan Silivestru
> > > > > > +1 (519) 589-3624
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Dan Silivestru
> > > > +1 (519) 589-3624
> > > >
> > >
> >
> >
> >
> > --
> > Dan Silivestru
> > +1 (519) 589-3624
> >
>
--
Dan Silivestru
+1 (519) 589-3624
Re: ripple problem
Posted by Marc Luria <ma...@luria.net>.
I think I have it only running as a Chrome extension.
On Tue, Sep 10, 2013 at 6:11 PM, Dan Silivestru <da...@gmail.com>wrote:
> Right :-) But don't forget to disable Ripple if you also have it running as
> an extension.
>
>
>
>
> On Tue, Sep 10, 2013 at 11:01 AM, Gord Tanner <gt...@gmail.com> wrote:
>
> > also ripple emulate will start a local proxy for you
> >
> >
> > On Tue, Sep 10, 2013 at 10:54 AM, Dan Silivestru
> > <da...@gmail.com>wrote:
> >
> > > Hi Marc,
> > >
> > > You're in the right spot. Just pick Local and make sure your route and
> > port
> > > are correct. You will see the value for those once your run the
> following
> > > command in the console (assuming you've installed npm ripple-emulator)
> > >
> > > The command is:
> > >
> > > ripple proxy
> > >
> > > Cheers,
> > >
> > > Dan.
> > >
> > >
> > > On Tue, Sep 10, 2013 at 10:50 AM, Marc Luria <ma...@luria.net> wrote:
> > >
> > > > I am now using 0.9.18 based on Brent's suggestion.
> > > >
> > > > How do I go to the setttings pane? The settings pane I see in ripple
> > > has a
> > > > field Cross Domain Proxy which is set to Remote. The other two
> > settings
> > > > are Disabled and Local.
> > > >
> > > >
> > > >
> > > > m
> > > >
> > > >
> > > >
> > > > On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <
> > > dan.silivestru@gmail.com
> > > > >wrote:
> > > >
> > > > > You can also try installing the ripple from npm:
> > > > > https://npmjs.org/package/ripple-emulator
> > > > >
> > > > > Once it's installed globally just rung the ripple proxy command
> over
> > > your
> > > > > project's directory and in Ripple, go to the settings pane and
> change
> > > > your
> > > > > cross origin proxy settings to point to your local instance.
> > > > >
> > > > >
> > > > > On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <G....@cadenas.de>
> > > wrote:
> > > > >
> > > > > > Try starting Chrome with "--disable-web-security" Parameter.
> > > > > > This should allow you to do cross domain requests.
> > > > > > Otherwise you could put your origin into your server's
> > > > > > Access-Control-Allow-Origin header.
> > > > > >
> > > > > >
> > > > > > -----Ursprüngliche Nachricht-----
> > > > > > Von: Marc Luria [mailto:marc@luria.net]
> > > > > > Gesendet: Dienstag, 10. September 2013 01:46
> > > > > > An: dev@ripple.incubator.apache.org
> > > > > > Betreff: ripple problem
> > > > > >
> > > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > > >
> > > > > > XMLHttpRequest cannot load
> > > > > >
> > > > > > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > > > > > Access-Control-Allow-Origin
> > > > > >
> > > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > > >
> > > > > > I don't think I've changed anything, though maybe Chrome updated,
> > it
> > > > was
> > > > > > working well before. I tried going back a few versions of chrome
> > and
> > > > had
> > > > > > the same problem.
> > > > > >
> > > > > > Makes it hard to use AJAX.
> > > > > >
> > > > > > Any help or workaround would be appreciated.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Dan Silivestru
> > > > > +1 (519) 589-3624
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Dan Silivestru
> > > +1 (519) 589-3624
> > >
> >
>
>
>
> --
> Dan Silivestru
> +1 (519) 589-3624
>
Re: ripple problem
Posted by Dan Silivestru <da...@gmail.com>.
Right :-) But don't forget to disable Ripple if you also have it running as
an extension.
On Tue, Sep 10, 2013 at 11:01 AM, Gord Tanner <gt...@gmail.com> wrote:
> also ripple emulate will start a local proxy for you
>
>
> On Tue, Sep 10, 2013 at 10:54 AM, Dan Silivestru
> <da...@gmail.com>wrote:
>
> > Hi Marc,
> >
> > You're in the right spot. Just pick Local and make sure your route and
> port
> > are correct. You will see the value for those once your run the following
> > command in the console (assuming you've installed npm ripple-emulator)
> >
> > The command is:
> >
> > ripple proxy
> >
> > Cheers,
> >
> > Dan.
> >
> >
> > On Tue, Sep 10, 2013 at 10:50 AM, Marc Luria <ma...@luria.net> wrote:
> >
> > > I am now using 0.9.18 based on Brent's suggestion.
> > >
> > > How do I go to the setttings pane? The settings pane I see in ripple
> > has a
> > > field Cross Domain Proxy which is set to Remote. The other two
> settings
> > > are Disabled and Local.
> > >
> > >
> > >
> > > m
> > >
> > >
> > >
> > > On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <
> > dan.silivestru@gmail.com
> > > >wrote:
> > >
> > > > You can also try installing the ripple from npm:
> > > > https://npmjs.org/package/ripple-emulator
> > > >
> > > > Once it's installed globally just rung the ripple proxy command over
> > your
> > > > project's directory and in Ripple, go to the settings pane and change
> > > your
> > > > cross origin proxy settings to point to your local instance.
> > > >
> > > >
> > > > On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <G....@cadenas.de>
> > wrote:
> > > >
> > > > > Try starting Chrome with "--disable-web-security" Parameter.
> > > > > This should allow you to do cross domain requests.
> > > > > Otherwise you could put your origin into your server's
> > > > > Access-Control-Allow-Origin header.
> > > > >
> > > > >
> > > > > -----Ursprüngliche Nachricht-----
> > > > > Von: Marc Luria [mailto:marc@luria.net]
> > > > > Gesendet: Dienstag, 10. September 2013 01:46
> > > > > An: dev@ripple.incubator.apache.org
> > > > > Betreff: ripple problem
> > > > >
> > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > >
> > > > > XMLHttpRequest cannot load
> > > > >
> > > > > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > > > > Access-Control-Allow-Origin
> > > > >
> > > > > using 0.9.18 in Chrome I'm getting the following error:
> > > > >
> > > > > I don't think I've changed anything, though maybe Chrome updated,
> it
> > > was
> > > > > working well before. I tried going back a few versions of chrome
> and
> > > had
> > > > > the same problem.
> > > > >
> > > > > Makes it hard to use AJAX.
> > > > >
> > > > > Any help or workaround would be appreciated.
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Dan Silivestru
> > > > +1 (519) 589-3624
> > > >
> > >
> >
> >
> >
> > --
> > Dan Silivestru
> > +1 (519) 589-3624
> >
>
--
Dan Silivestru
+1 (519) 589-3624
Re: ripple problem
Posted by Gord Tanner <gt...@gmail.com>.
also ripple emulate will start a local proxy for you
On Tue, Sep 10, 2013 at 10:54 AM, Dan Silivestru
<da...@gmail.com>wrote:
> Hi Marc,
>
> You're in the right spot. Just pick Local and make sure your route and port
> are correct. You will see the value for those once your run the following
> command in the console (assuming you've installed npm ripple-emulator)
>
> The command is:
>
> ripple proxy
>
> Cheers,
>
> Dan.
>
>
> On Tue, Sep 10, 2013 at 10:50 AM, Marc Luria <ma...@luria.net> wrote:
>
> > I am now using 0.9.18 based on Brent's suggestion.
> >
> > How do I go to the setttings pane? The settings pane I see in ripple
> has a
> > field Cross Domain Proxy which is set to Remote. The other two settings
> > are Disabled and Local.
> >
> >
> >
> > m
> >
> >
> >
> > On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <
> dan.silivestru@gmail.com
> > >wrote:
> >
> > > You can also try installing the ripple from npm:
> > > https://npmjs.org/package/ripple-emulator
> > >
> > > Once it's installed globally just rung the ripple proxy command over
> your
> > > project's directory and in Ripple, go to the settings pane and change
> > your
> > > cross origin proxy settings to point to your local instance.
> > >
> > >
> > > On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <G....@cadenas.de>
> wrote:
> > >
> > > > Try starting Chrome with "--disable-web-security" Parameter.
> > > > This should allow you to do cross domain requests.
> > > > Otherwise you could put your origin into your server's
> > > > Access-Control-Allow-Origin header.
> > > >
> > > >
> > > > -----Ursprüngliche Nachricht-----
> > > > Von: Marc Luria [mailto:marc@luria.net]
> > > > Gesendet: Dienstag, 10. September 2013 01:46
> > > > An: dev@ripple.incubator.apache.org
> > > > Betreff: ripple problem
> > > >
> > > > using 0.9.18 in Chrome I'm getting the following error:
> > > >
> > > > XMLHttpRequest cannot load
> > > >
> > > > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > > > Access-Control-Allow-Origin
> > > >
> > > > using 0.9.18 in Chrome I'm getting the following error:
> > > >
> > > > I don't think I've changed anything, though maybe Chrome updated, it
> > was
> > > > working well before. I tried going back a few versions of chrome and
> > had
> > > > the same problem.
> > > >
> > > > Makes it hard to use AJAX.
> > > >
> > > > Any help or workaround would be appreciated.
> > > >
> > >
> > >
> > >
> > > --
> > > Dan Silivestru
> > > +1 (519) 589-3624
> > >
> >
>
>
>
> --
> Dan Silivestru
> +1 (519) 589-3624
>
Re: ripple problem
Posted by Dan Silivestru <da...@gmail.com>.
Hi Marc,
You're in the right spot. Just pick Local and make sure your route and port
are correct. You will see the value for those once your run the following
command in the console (assuming you've installed npm ripple-emulator)
The command is:
ripple proxy
Cheers,
Dan.
On Tue, Sep 10, 2013 at 10:50 AM, Marc Luria <ma...@luria.net> wrote:
> I am now using 0.9.18 based on Brent's suggestion.
>
> How do I go to the setttings pane? The settings pane I see in ripple has a
> field Cross Domain Proxy which is set to Remote. The other two settings
> are Disabled and Local.
>
>
>
> m
>
>
>
> On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <dan.silivestru@gmail.com
> >wrote:
>
> > You can also try installing the ripple from npm:
> > https://npmjs.org/package/ripple-emulator
> >
> > Once it's installed globally just rung the ripple proxy command over your
> > project's directory and in Ripple, go to the settings pane and change
> your
> > cross origin proxy settings to point to your local instance.
> >
> >
> > On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <G....@cadenas.de> wrote:
> >
> > > Try starting Chrome with "--disable-web-security" Parameter.
> > > This should allow you to do cross domain requests.
> > > Otherwise you could put your origin into your server's
> > > Access-Control-Allow-Origin header.
> > >
> > >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Marc Luria [mailto:marc@luria.net]
> > > Gesendet: Dienstag, 10. September 2013 01:46
> > > An: dev@ripple.incubator.apache.org
> > > Betreff: ripple problem
> > >
> > > using 0.9.18 in Chrome I'm getting the following error:
> > >
> > > XMLHttpRequest cannot load
> > >
> > > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > > Access-Control-Allow-Origin
> > >
> > > using 0.9.18 in Chrome I'm getting the following error:
> > >
> > > I don't think I've changed anything, though maybe Chrome updated, it
> was
> > > working well before. I tried going back a few versions of chrome and
> had
> > > the same problem.
> > >
> > > Makes it hard to use AJAX.
> > >
> > > Any help or workaround would be appreciated.
> > >
> >
> >
> >
> > --
> > Dan Silivestru
> > +1 (519) 589-3624
> >
>
--
Dan Silivestru
+1 (519) 589-3624
Re: ripple problem
Posted by Marc Luria <ma...@luria.net>.
I am now using 0.9.18 based on Brent's suggestion.
How do I go to the setttings pane? The settings pane I see in ripple has a
field Cross Domain Proxy which is set to Remote. The other two settings
are Disabled and Local.
m
On Tue, Sep 10, 2013 at 4:32 PM, Dan Silivestru <da...@gmail.com>wrote:
> You can also try installing the ripple from npm:
> https://npmjs.org/package/ripple-emulator
>
> Once it's installed globally just rung the ripple proxy command over your
> project's directory and in Ripple, go to the settings pane and change your
> cross origin proxy settings to point to your local instance.
>
>
> On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <G....@cadenas.de> wrote:
>
> > Try starting Chrome with "--disable-web-security" Parameter.
> > This should allow you to do cross domain requests.
> > Otherwise you could put your origin into your server's
> > Access-Control-Allow-Origin header.
> >
> >
> > -----Ursprüngliche Nachricht-----
> > Von: Marc Luria [mailto:marc@luria.net]
> > Gesendet: Dienstag, 10. September 2013 01:46
> > An: dev@ripple.incubator.apache.org
> > Betreff: ripple problem
> >
> > using 0.9.18 in Chrome I'm getting the following error:
> >
> > XMLHttpRequest cannot load
> >
> > Origin http:/ <http://gamechat/>/mysite is not allowed by
> > Access-Control-Allow-Origin
> >
> > using 0.9.18 in Chrome I'm getting the following error:
> >
> > I don't think I've changed anything, though maybe Chrome updated, it was
> > working well before. I tried going back a few versions of chrome and had
> > the same problem.
> >
> > Makes it hard to use AJAX.
> >
> > Any help or workaround would be appreciated.
> >
>
>
>
> --
> Dan Silivestru
> +1 (519) 589-3624
>
Re: ripple problem
Posted by Dan Silivestru <da...@gmail.com>.
You can also try installing the ripple from npm:
https://npmjs.org/package/ripple-emulator
Once it's installed globally just rung the ripple proxy command over your
project's directory and in Ripple, go to the settings pane and change your
cross origin proxy settings to point to your local instance.
On Tue, Sep 10, 2013 at 2:02 AM, Mayr Gregor <G....@cadenas.de> wrote:
> Try starting Chrome with "--disable-web-security" Parameter.
> This should allow you to do cross domain requests.
> Otherwise you could put your origin into your server's
> Access-Control-Allow-Origin header.
>
>
> -----Ursprüngliche Nachricht-----
> Von: Marc Luria [mailto:marc@luria.net]
> Gesendet: Dienstag, 10. September 2013 01:46
> An: dev@ripple.incubator.apache.org
> Betreff: ripple problem
>
> using 0.9.18 in Chrome I'm getting the following error:
>
> XMLHttpRequest cannot load
>
> Origin http:/ <http://gamechat/>/mysite is not allowed by
> Access-Control-Allow-Origin
>
> using 0.9.18 in Chrome I'm getting the following error:
>
> I don't think I've changed anything, though maybe Chrome updated, it was
> working well before. I tried going back a few versions of chrome and had
> the same problem.
>
> Makes it hard to use AJAX.
>
> Any help or workaround would be appreciated.
>
--
Dan Silivestru
+1 (519) 589-3624
AW: ripple problem
Posted by Mayr Gregor <G....@cadenas.de>.
Try starting Chrome with "--disable-web-security" Parameter.
This should allow you to do cross domain requests.
Otherwise you could put your origin into your server's Access-Control-Allow-Origin header.
-----Ursprüngliche Nachricht-----
Von: Marc Luria [mailto:marc@luria.net]
Gesendet: Dienstag, 10. September 2013 01:46
An: dev@ripple.incubator.apache.org
Betreff: ripple problem
using 0.9.18 in Chrome I'm getting the following error:
XMLHttpRequest cannot load
Origin http:/ <http://gamechat/>/mysite is not allowed by Access-Control-Allow-Origin
using 0.9.18 in Chrome I'm getting the following error:
I don't think I've changed anything, though maybe Chrome updated, it was working well before. I tried going back a few versions of chrome and had the same problem.
Makes it hard to use AJAX.
Any help or workaround would be appreciated.