You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@doris.apache.org by lu...@apache.org on 2023/05/10 14:40:56 UTC

[doris-website] branch master updated: Add 1.2 version and move dev version documents to docs folder (#224)

This is an automated email from the ASF dual-hosted git repository.

luzhijing pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/doris-website.git


The following commit(s) were added to refs/heads/master by this push:
     new 6ef9d97ec88 Add 1.2 version and move dev version documents to docs folder (#224)
6ef9d97ec88 is described below

commit 6ef9d97ec883da702896a90b93130c65e1be584a
Author: wangyongfeng <94...@qq.com>
AuthorDate: Wed May 10 22:40:14 2023 +0800

    Add 1.2 version and move dev version documents to docs folder (#224)
---
 .github/workflows/cron-deploy-website.yml          |   10 +-
 .github/workflows/manual-deploy-website.yml        |   10 +-
 .github/workflows/manual-deploy.yml                |   85 -
 dev.sh                                             |   63 +
 .../cluster-management/elastic-expansion.md        |  153 --
 .../cluster-management/load-balancing.md           |  636 -----
 docs/admin-manual/cluster-management/upgrade.md    |  119 -
 docs/admin-manual/config/be-config.md              | 1547 -----------
 docs/admin-manual/config/fe-config.md              | 2173 ----------------
 docs/admin-manual/data-admin/backup.md             |  233 --
 docs/admin-manual/data-admin/delete-recover.md     |   53 -
 docs/admin-manual/http-actions/cancel-label.md     |   64 -
 .../http-actions/check-reset-rpc-cache.md          |   47 -
 .../admin-manual/http-actions/compaction-action.md |  211 --
 .../admin-manual/http-actions/connection-action.md |   42 -
 docs/admin-manual/http-actions/fe-get-log-file.md  |   74 -
 .../http-actions/fe/backends-action.md             |   70 -
 .../http-actions/fe/bootstrap-action.md            |  121 -
 .../http-actions/fe/cancel-load-action.md          |   96 -
 docs/admin-manual/http-actions/fe/config-action.md |   83 -
 .../admin-manual/http-actions/fe/get-load-state.md |   88 -
 .../admin-manual/http-actions/fe/get-small-file.md |  102 -
 .../http-actions/fe/manager/cluster-action.md      |   77 -
 .../http-actions/fe/manager/node-action.md         |  435 ----
 .../fe/manager/query-profile-action.md             |  308 ---
 .../admin-manual/http-actions/fe/profile-action.md |   80 -
 .../http-actions/fe/query-profile-action.md        |  108 -
 .../http-actions/fe/table-schema-action.md         |  155 --
 docs/admin-manual/http-actions/get-load-state.md   |   59 -
 docs/admin-manual/http-actions/profile-action.md   |  120 -
 .../http-actions/query-detail-action.md            |   61 -
 docs/admin-manual/http-actions/show-data-action.md |   35 -
 .../maint-monitor/be-olap-error-code.md            |  254 --
 docs/admin-manual/maint-monitor/disk-capacity.md   |  167 --
 .../maint-monitor/metadata-operation.md            |  395 ---
 docs/admin-manual/maint-monitor/monitor-alert.md   |  309 ---
 .../maint-monitor/monitor-metrics/be-metrics.md    |   84 -
 .../maint-monitor/monitor-metrics/fe-metrics.md    |  155 --
 .../maint-monitor/tablet-repair-and-balance.md     |  776 ------
 docs/admin-manual/privilege-ldap/ldap.md           |  175 --
 docs/admin-manual/privilege-ldap/user-privilege.md |  234 --
 docs/admin-manual/query-profile.md                 |  272 --
 docs/advanced/alter-table/schema-change.md         |  286 ---
 docs/advanced/best-practice/import-analysis.md     |  171 --
 docs/advanced/best-practice/query-analysis.md      |  499 ----
 docs/advanced/broker.md                            |  196 --
 docs/advanced/join-optimization/colocation-join.md |  409 ---
 docs/advanced/join-optimization/runtime-filter.md  |  282 --
 docs/advanced/materialized-view.md                 |  492 ----
 docs/advanced/orthogonal-bitmap-manual.md          |  161 --
 docs/advanced/partition/dynamic-partition.md       |  468 ----
 docs/advanced/partition/table-temp-partition.md    |  288 ---
 docs/advanced/resource.md                          |  154 --
 docs/advanced/variables.md                         |  507 ----
 docs/advanced/vectorized-execution-engine.md       |  122 -
 docs/benchmark/ssb.md                              |  607 -----
 docs/benchmark/tpch.md                             |  878 -------
 docs/data-operate/export/export-manual.md          |  235 --
 .../import/import-scenes/external-storage-load.md  |  176 --
 .../import/import-scenes/external-table-load.md    |  123 -
 .../data-operate/import/import-scenes/jdbc-load.md |  164 --
 .../import/import-scenes/kafka-load.md             |  133 -
 .../import/import-scenes/load-atomicity.md         |   49 -
 .../import/import-scenes/load-data-convert.md      |  366 ---
 .../import/import-scenes/local-file-load.md        |  217 --
 .../import/import-way/binlog-load-manual.md        |  551 ----
 .../import/import-way/broker-load-manual.md        |  439 ----
 .../import/import-way/insert-into-manual.md        |  263 --
 .../import/import-way/load-json-format.md          |  514 ----
 .../import/import-way/routine-load-manual.md       |  431 ----
 .../import/import-way/s3-load-manual.md            |   94 -
 .../import/import-way/spark-load-manual.md         |  742 ------
 .../import/import-way/stream-load-manual.md        |  408 ---
 docs/data-operate/import/load-manual.md            |   83 -
 .../update-delete/batch-delete-manual.md           |  225 --
 .../update-delete/sequence-column-manual.md        |  230 --
 docs/data-operate/update-delete/update.md          |  128 -
 docs/data-table/basic-usage.md                     |  667 -----
 docs/data-table/best-practice.md                   |  183 --
 docs/data-table/data-model.md                      |  457 ----
 docs/data-table/data-partition.md                  |  398 ---
 docs/data-table/hit-the-rollup.md                  |  452 ----
 docs/data-table/index/bitmap-index.md              |   84 -
 docs/data-table/index/prefix-index.md              |   85 -
 docs/ecosystem/audit-plugin.md                     |  101 -
 docs/ecosystem/cloudcanal.md                       |   35 -
 docs/ecosystem/datax.md                            |  396 ---
 docs/ecosystem/doris-manager/cluster-managenent.md |   65 -
 .../ecosystem/doris-manager/compiling-deploying.md |  131 -
 docs/ecosystem/doris-manager/initializing.md       |   43 -
 docs/ecosystem/doris-manager/space-list.md         |  237 --
 docs/ecosystem/doris-manager/space-management.md   |   53 -
 docs/ecosystem/doris-manager/system-settings.md    |   91 -
 docs/ecosystem/external-table/doris-on-es.md       |  581 -----
 docs/ecosystem/external-table/hive-bitmap-udf.md   |  109 -
 docs/ecosystem/external-table/hive-of-doris.md     |  202 --
 .../external-table/hudi-external-table.md          |  137 -
 docs/ecosystem/external-table/iceberg-of-doris.md  |  244 --
 docs/ecosystem/external-table/odbc-of-doris.md     |  385 ---
 docs/ecosystem/flink-doris-connector.md            |  465 ----
 docs/ecosystem/logstash.md                         |  198 --
 docs/ecosystem/mysql-to-doris.md                   |  103 -
 docs/ecosystem/plugin-development-manual.md        |  314 ---
 docs/ecosystem/seatunnel/flink-sink.md             |  116 -
 docs/ecosystem/seatunnel/spark-sink.md             |  123 -
 docs/ecosystem/spark-doris-connector.md            |  318 ---
 docs/ecosystem/udf/contribute-udf.md               |  124 -
 docs/ecosystem/udf/native-user-defined-function.md |  271 --
 docs/ecosystem/udf/remote-user-defined-function.md |  109 -
 docs/faq/data-faq.md                               |  136 -
 docs/faq/install-faq.md                            |  295 ---
 docs/faq/sql-faq.md                                |   86 -
 docs/get-starting/get-starting.md                  |  399 ---
 .../construct-docker/construct-docker-compose.md   |   30 -
 .../construct-docker/construct-docker-image.md     |  297 ---
 docs/install/install-deploy.md                     |  375 ---
 docs/install/source-install/compilation-arm.md     |  596 -----
 .../compilation-with-ldb-toolchain.md              |  127 -
 docs/install/source-install/compilation.md         |  248 --
 docs/releasenotes/release-1.1.0.md                 |  378 ---
 .../aggregate-functions/bitmap_union.md            |  149 --
 .../aggregate-functions/group_concat.md            |   78 -
 .../aggregate-functions/percentile.md              |   58 -
 .../bitmap-functions/bitmap_contains.md            |   55 -
 .../sql-functions/bitmap-functions/bitmap_count.md |   57 -
 .../bitmap-functions/bitmap_from_string.md         |   71 -
 .../bitmap-functions/bitmap_has_all.md             |   56 -
 .../bitmap-functions/bitmap_has_any.md             |   55 -
 .../sql-functions/bitmap-functions/bitmap_hash.md  |   52 -
 docs/sql-manual/sql-functions/cast.md              |   82 -
 .../sql-functions/conditional-functions/nvl.md     |   54 -
 .../date-time-functions/current_timestamp.md       |   48 -
 .../sql-functions/date-time-functions/date_add.md  |   54 -
 .../date-time-functions/date_format.md             |  167 --
 .../sql-functions/date-time-functions/date_sub.md  |   54 -
 .../sql-functions/date-time-functions/datediff.md  |   60 -
 .../sql-functions/date-time-functions/day.md       |   50 -
 .../sql-functions/date-time-functions/dayname.md   |   50 -
 .../date-time-functions/dayofmonth.md              |   51 -
 .../sql-functions/date-time-functions/dayofweek.md |   56 -
 .../sql-functions/date-time-functions/dayofyear.md |   51 -
 .../sql-functions/date-time-functions/days_diff.md |   48 -
 .../sql-functions/date-time-functions/from_days.md |   48 -
 .../sql-functions/date-time-functions/hour.md      |   49 -
 .../sql-functions/date-time-functions/makedate.md  |   46 -
 .../sql-functions/date-time-functions/minute.md    |   49 -
 .../sql-functions/date-time-functions/month.md     |   50 -
 .../sql-functions/date-time-functions/monthname.md |   50 -
 .../sql-functions/date-time-functions/now.md       |   48 -
 .../sql-functions/date-time-functions/second.md    |   49 -
 .../date-time-functions/str_to_date.md             |   72 -
 .../date-time-functions/time_round.md              |   87 -
 .../sql-functions/date-time-functions/timediff.md  |   66 -
 .../date-time-functions/timestampadd.md            |   59 -
 .../date-time-functions/timestampdiff.md           |   68 -
 .../sql-functions/date-time-functions/to_days.md   |   51 -
 .../date-time-functions/unix_timestamp.md          |   86 -
 .../date-time-functions/utc_timestamp.md           |   49 -
 .../sql-functions/date-time-functions/week.md      |   68 -
 .../sql-functions/date-time-functions/weekday.md   |   66 -
 .../date-time-functions/weekofyear.md              |   50 -
 .../sql-functions/date-time-functions/year.md      |   50 -
 .../sql-functions/date-time-functions/yearweek.md  |   80 -
 .../sql-functions/encrypt-digest-functions/aes.md  |   93 -
 .../json-functions/get_json_double.md              |   74 -
 .../sql-functions/json-functions/get_json_int.md   |   74 -
 .../json-functions/get_json_string.md              |   84 -
 .../sql-functions/json-functions/json_array.md     |   70 -
 .../sql-functions/json-functions/json_object.md    |   71 -
 .../sql-functions/json-functions/json_quote.md     |   70 -
 .../sql-manual/sql-functions/math-functions/abs.md |   62 -
 .../sql-functions/math-functions/conv.md           |   60 -
 .../sql-functions/math-functions/negative.md       |   51 -
 .../sql-functions/math-functions/pmod.md           |   54 -
 .../sql-functions/math-functions/positive.md       |   51 -
 .../sql-functions/math-functions/round.md          |   63 -
 .../sql-functions/math-functions/sqrt.md           |   57 -
 .../sql-functions/spatial-functions/st_polygon.md  |   48 -
 .../sql-functions/string-functions/concat_ws.md    |   63 -
 .../sql-functions/string-functions/ends_with.md    |   54 -
 .../sql-functions/string-functions/lcase.md        |   37 -
 .../sql-functions/string-functions/left.md         |   47 -
 .../sql-functions/string-functions/lower.md        |   47 -
 .../sql-functions/string-functions/ltrim.md        |   47 -
 .../string-functions/null_or_empty.md              |   60 -
 .../sql-functions/string-functions/parse_url.md    |   48 -
 .../string-functions/regexp/regexp_extract.md      |   54 -
 .../sql-functions/string-functions/replace.md      |   46 -
 .../sql-functions/string-functions/reverse.md      |   56 -
 .../sql-functions/string-functions/right.md        |   47 -
 .../sql-functions/string-functions/rtrim.md        |   47 -
 .../sql-functions/string-functions/split_part.md   |   69 -
 .../sql-functions/string-functions/starts_with.md  |   54 -
 .../sql-functions/string-functions/strleft.md      |   47 -
 .../sql-functions/string-functions/strright.md     |   48 -
 .../sql-functions/string-functions/substring.md    |   77 -
 .../sql-functions/string-functions/trim.md         |   47 -
 .../sql-functions/string-functions/ucase.md        |   37 -
 .../sql-functions/string-functions/upper.md        |   47 -
 .../table-functions/explode-bitmap.md              |  157 --
 .../table-functions/explode-json-array.md          |  286 ---
 .../table-functions/explode-numbers.md             |   56 -
 .../sql-functions/table-functions/explode-split.md |  112 -
 .../table-functions/outer-combinator.md            |   48 -
 .../window-functions/WINDOW-FUNCTION-LEAD.md       |   51 -
 .../Account-Management-Statements/CREATE-USER.md   |   95 -
 .../Account-Management-Statements/DROP-ROLE.md     |   52 -
 .../Account-Management-Statements/GRANT.md         |  129 -
 .../Account-Management-Statements/LDAP.md          |   55 -
 .../Account-Management-Statements/REVOKE.md        |   68 -
 .../Account-Management-Statements/SET-PROPERTY.md  |  172 --
 .../ALTER-SYSTEM-ADD-FOLLOWER.md                   |   61 -
 .../ALTER-SYSTEM-ADD-OBSERVER.md                   |   61 -
 .../ALTER-SYSTEM-DROP-FOLLOWER.md                  |   61 -
 .../ALTER-SYSTEM-DROP-OBSERVER.md                  |   61 -
 .../Alter/ALTER-RESOURCE.md                        |   63 -
 .../Alter/ALTER-TABLE-COLUMN.md                    |  230 --
 .../Alter/ALTER-TABLE-PARTITION.md                 |  165 --
 .../Alter/ALTER-TABLE-PROPERTY.md                  |  262 --
 .../Alter/ALTER-TABLE-RENAME.md                    |   96 -
 .../Alter/ALTER-TABLE-REPLACE.md                   |   86 -
 .../Alter/ALTER-TABLE-ROLLUP.md                    |  141 -
 .../Backup-and-Restore/BACKUP.md                   |  164 --
 .../Backup-and-Restore/CREATE-REPOSITORY.md        |  150 --
 .../Backup-and-Restore/RESTORE.md                  |  123 -
 .../Create/CREATE-FUNCTION.md                      |  154 --
 .../Create/CREATE-MATERIALIZED-VIEW.md             |  238 --
 .../Create/CREATE-POLICY.md                        |   95 -
 .../Create/CREATE-RESOURCE.md                      |  118 -
 .../Create/CREATE-TABLE-AS-SELECT.md               |   83 -
 .../Create/CREATE-TABLE.md                         |  614 -----
 .../Drop/DROP-DATABASE.md                          |   59 -
 .../Drop/DROP-FUNCTION.md                          |   61 -
 .../Data-Definition-Statements/Drop/DROP-POLICY.md |   74 -
 .../Load/BROKER-LOAD.md                            |  447 ----
 .../Load/CANCEL-LOAD.md                            |   69 -
 .../Load/CREATE-ROUTINE-LOAD.md                    |  563 ----
 .../Load/CREATE-SYNC-JOB.md                        |  161 --
 .../Load/STREAM-LOAD.md                            |  446 ----
 .../Manipulation/DELETE.md                         |   89 -
 .../Manipulation/EXPORT.md                         |  223 --
 .../Manipulation/INSERT.md                         |  245 --
 .../Manipulation/SELECT.md                         |  396 ---
 .../Manipulation/UPDATE.md                         |   84 -
 .../Data-Manipulation-Statements/OUTFILE.md        |  304 ---
 docs/sql-manual/sql-reference/Data-Types/BITMAP.md |   48 -
 docs/sql-manual/sql-reference/Data-Types/CHAR.md   |   33 -
 docs/sql-manual/sql-reference/Data-Types/DATE.md   |   47 -
 .../sql-reference/Data-Types/DATETIME.md           |   34 -
 .../sql-manual/sql-reference/Data-Types/DECIMAL.md |   39 -
 .../sql-reference/Data-Types/QUANTILE_STATE.md     |   62 -
 docs/sql-manual/sql-reference/Data-Types/STRING.md |   36 -
 .../ADMIN-CHECK-TABLET.md                          |   65 -
 .../ADMIN-SHOW-CONFIG.md                           |   77 -
 .../INSTALL-PLUGIN.md                              |   80 -
 .../Database-Administration-Statements/RECOVER.md  |   87 -
 .../SET-VARIABLE.md                                |   90 -
 .../SHOW-ALTER-TABLE-MATERIALIZED-VIEW.md          |  120 -
 .../sql-reference/Show-Statements/SHOW-BACKENDS.md |   63 -
 .../sql-reference/Show-Statements/SHOW-COLUMNS.md  |   56 -
 .../Show-Statements/SHOW-CREATE-FUNCTION.md        |   62 -
 .../Show-Statements/SHOW-DATABASES.md              |   50 -
 .../Show-Statements/SHOW-FRONTENDS.md              |   60 -
 .../Show-Statements/SHOW-FUNCTIONS.md              |   93 -
 .../Show-Statements/SHOW-LOAD-PROFILE.md           |  185 --
 .../sql-reference/Show-Statements/SHOW-PROC.md     |  216 --
 .../Show-Statements/SHOW-PROCESSLIST.md            |   68 -
 .../sql-reference/Show-Statements/SHOW-PROPERTY.md |   83 -
 .../Show-Statements/SHOW-QUERY-PROFILE.md          |  221 --
 .../sql-reference/Show-Statements/SHOW-ROLLUP.md   |   38 -
 .../sql-reference/Show-Statements/SHOW-STATUS.md   |   42 -
 .../Show-Statements/SHOW-STREAM-LOAD.md            |  100 -
 .../sql-reference/Show-Statements/SHOW-TABLES.md   |   83 -
 .../sql-reference/Show-Statements/SHOW-TABLETS.md  |   82 -
 .../Show-Statements/SHOW-VARIABLES.md              |   76 -
 .../sql-reference/Utility-Statements/USE.md        |   57 -
 docs/summary/basic-summary.md                      |   91 -
 docusaurus.config.js                               |   36 +-
 i18n/zh-CN/code.json                               | 1558 +++++------
 .../docusaurus-plugin-content-docs/current.json    |  282 --
 .../cluster-management/elastic-expansion.md        |  147 --
 .../cluster-management/load-balancing.md           |  635 -----
 .../admin-manual/cluster-management/upgrade.md     |  117 -
 .../current/admin-manual/config/be-config.md       | 1569 ------------
 .../current/admin-manual/config/fe-config.md       | 2218 ----------------
 .../current/admin-manual/data-admin/backup.md      |  233 --
 .../admin-manual/http-actions/cancel-label.md      |   59 -
 .../admin-manual/http-actions/compaction-action.md |  212 --
 .../admin-manual/http-actions/connection-action.md |   42 -
 .../admin-manual/http-actions/fe-get-log-file.md   |   80 -
 .../http-actions/fe/bootstrap-action.md            |  125 -
 .../http-actions/fe/cancel-load-action.md          |   96 -
 .../admin-manual/http-actions/fe/config-action.md  |   83 -
 .../admin-manual/http-actions/fe/get-load-state.md |   88 -
 .../admin-manual/http-actions/fe/get-small-file.md |  101 -
 .../http-actions/fe/manager/cluster-action.md      |   77 -
 .../http-actions/fe/manager/node-action.md         |  435 ----
 .../fe/manager/query-profile-action.md             |  308 ---
 .../admin-manual/http-actions/fe/profile-action.md |   80 -
 .../http-actions/fe/query-profile-action.md        |  108 -
 .../http-actions/fe/table-schema-action.md         |  155 --
 .../admin-manual/http-actions/get-load-state.md    |   59 -
 .../admin-manual/http-actions/profile-action.md    |  120 -
 .../http-actions/query-detail-action.md            |   59 -
 .../admin-manual/http-actions/show-data-action.md  |   35 -
 .../maint-monitor/be-olap-error-code.md            |  260 --
 .../maint-monitor/metadata-operation.md            |  395 ---
 .../admin-manual/maint-monitor/monitor-alert.md    |  309 ---
 .../maint-monitor/monitor-metrics/be-metrics.md    |   84 -
 .../maint-monitor/monitor-metrics/fe-metrics.md    |  155 --
 .../maint-monitor/tablet-repair-and-balance.md     |  778 ------
 .../current/admin-manual/privilege-ldap/ldap.md    |  192 --
 .../admin-manual/privilege-ldap/user-privilege.md  |  225 --
 .../current/admin-manual/query-profile.md          |  276 --
 .../current/advanced/alter-table/replace-table.md  |   71 -
 .../current/advanced/alter-table/schema-change.md  |  295 ---
 .../advanced/best-practice/import-analysis.md      |  170 --
 .../advanced/best-practice/query-analysis.md       |  501 ----
 .../current/advanced/broker.md                     |  189 --
 .../advanced/join-optimization/colocation-join.md  |  411 ---
 .../join-optimization/doris-join-optimization.md   |  226 --
 .../advanced/join-optimization/runtime-filter.md   |  286 ---
 .../current/advanced/materialized-view.md          |  490 ----
 .../current/advanced/orthogonal-bitmap-manual.md   |  163 --
 .../advanced/partition/dynamic-partition.md        |  458 ----
 .../advanced/partition/table-temp-partition.md     |  287 ---
 .../current/advanced/resource.md                   |  148 --
 .../current/advanced/variables.md                  |  497 ----
 .../advanced/vectorized-execution-engine.md        |  119 -
 .../current/benchmark/ssb.md                       |  613 -----
 .../current/benchmark/tpch.md                      |  881 -------
 .../current/data-operate/export/export-manual.md   |  226 --
 .../import/import-scenes/external-storage-load.md  |  182 --
 .../import/import-scenes/external-table-load.md    |  130 -
 .../data-operate/import/import-scenes/jdbc-load.md |  163 --
 .../import/import-scenes/kafka-load.md             |  134 -
 .../import/import-scenes/load-atomicity.md         |   49 -
 .../import/import-scenes/load-data-convert.md      |  366 ---
 .../import/import-scenes/local-file-load.md        |  220 --
 .../import/import-way/binlog-load-manual.md        |  536 ----
 .../import/import-way/insert-into-manual.md        |  280 --
 .../import/import-way/load-json-format.md          |  517 ----
 .../import/import-way/routine-load-manual.md       |  409 ---
 .../import/import-way/s3-load-manual.md            |   97 -
 .../import/import-way/spark-load-manual.md         |  699 -----
 .../import/import-way/stream-load-manual.md        |  423 ---
 .../current/data-operate/import/load-manual.md     |   84 -
 .../update-delete/batch-delete-manual.md           |  244 --
 .../update-delete/sequence-column-manual.md        |  254 --
 .../current/data-operate/update-delete/update.md   |  126 -
 .../current/data-table/advance-usage.md            |  294 ---
 .../current/data-table/basic-usage.md              |  690 -----
 .../current/data-table/best-practice.md            |  182 --
 .../current/data-table/data-model.md               |  466 ----
 .../current/data-table/data-partition.md           |  404 ---
 .../current/data-table/hit-the-rollup.md           |  452 ----
 .../current/data-table/index/bitmap-index.md       |   87 -
 .../current/data-table/index/prefix-index.md       |   84 -
 .../current/ecosystem/audit-plugin.md              |  101 -
 .../current/ecosystem/cloudcanal.md                |  116 -
 .../current/ecosystem/datax.md                     |  395 ---
 .../ecosystem/doris-manager/cluster-managenent.md  |   70 -
 .../ecosystem/doris-manager/compiling-deploying.md |  124 -
 .../ecosystem/doris-manager/initializing.md        |   43 -
 .../current/ecosystem/doris-manager/space-list.md  |  231 --
 .../ecosystem/doris-manager/space-management.md    |   53 -
 .../ecosystem/doris-manager/system-settings.md     |   90 -
 .../ecosystem/external-table/doris-on-es.md        |  579 -----
 .../ecosystem/external-table/hive-bitmap-udf.md    |  118 -
 .../ecosystem/external-table/hive-of-doris.md      |  200 --
 .../external-table/hudi-external-table.md          |  134 -
 .../ecosystem/external-table/iceberg-of-doris.md   |  242 --
 .../ecosystem/external-table/odbc-of-doris.md      |  373 ---
 .../current/ecosystem/flink-doris-connector.md     |  462 ----
 .../current/ecosystem/logstash.md                  |  198 --
 .../current/ecosystem/mysql-to-doris.md            |  104 -
 .../current/ecosystem/plugin-development-manual.md |  312 ---
 .../current/ecosystem/seatunnel/flink-sink.md      |  116 -
 .../current/ecosystem/seatunnel/spark-sink.md      |  124 -
 .../current/ecosystem/spark-doris-connector.md     |  326 ---
 .../current/ecosystem/udf/contribute-udf.md        |  124 -
 .../ecosystem/udf/native-user-defined-function.md  |  274 --
 .../ecosystem/udf/remote-user-defined-function.md  |  110 -
 .../current/faq/data-faq.md                        |  136 -
 .../current/faq/install-faq.md                     |  295 ---
 .../current/faq/sql-faq.md                         |   86 -
 .../current/get-starting/get-starting.md           |  402 ---
 .../construct-docker/construct-docker-compose.md   |   30 -
 .../construct-docker/construct-docker-image.md     |  303 ---
 .../current/install/install-deploy.md              |  370 ---
 .../install/source-install/compilation-arm.md      |  595 -----
 .../compilation-with-ldb-toolchain.md              |  127 -
 .../current/install/source-install/compilation.md  |  248 --
 .../current/releasenotes/release-1.1.0.md          |  393 ---
 .../aggregate-functions/bitmap_union.md            |  148 --
 .../aggregate-functions/group_concat.md            |   78 -
 .../aggregate-functions/percentile.md              |   57 -
 .../bitmap-functions/bitmap_contains.md            |   55 -
 .../bitmap-functions/bitmap_from_string.md         |   72 -
 .../bitmap-functions/bitmap_has_all.md             |   56 -
 .../bitmap-functions/bitmap_has_any.md             |   55 -
 .../sql-functions/bitmap-functions/bitmap_hash.md  |   52 -
 .../current/sql-manual/sql-functions/cast.md       |   82 -
 .../sql-functions/conditional-functions/nvl.md     |   54 -
 .../date-time-functions/current_timestamp.md       |   49 -
 .../sql-functions/date-time-functions/date_add.md  |   55 -
 .../sql-functions/date-time-functions/date_sub.md  |   55 -
 .../sql-functions/date-time-functions/datediff.md  |   58 -
 .../sql-functions/date-time-functions/day.md       |   49 -
 .../sql-functions/date-time-functions/days_diff.md |   48 -
 .../sql-functions/date-time-functions/hour.md      |   50 -
 .../sql-functions/date-time-functions/makedate.md  |   46 -
 .../sql-functions/date-time-functions/minute.md    |   50 -
 .../sql-functions/date-time-functions/now.md       |   49 -
 .../sql-functions/date-time-functions/second.md    |   50 -
 .../date-time-functions/str_to_date.md             |   72 -
 .../date-time-functions/time_round.md              |   87 -
 .../date-time-functions/timestampadd.md            |   60 -
 .../date-time-functions/timestampdiff.md           |   68 -
 .../date-time-functions/unix_timestamp.md          |   86 -
 .../date-time-functions/utc_timestamp.md           |   51 -
 .../sql-functions/date-time-functions/week.md      |   69 -
 .../sql-functions/date-time-functions/weekday.md   |   68 -
 .../sql-functions/date-time-functions/yearweek.md  |   81 -
 .../sql-functions/encrypt-digest-functions/aes.md  |   96 -
 .../json-functions/get_json_double.md              |   74 -
 .../sql-functions/json-functions/get_json_int.md   |   74 -
 .../json-functions/get_json_string.md              |   84 -
 .../sql-functions/json-functions/json_array.md     |   70 -
 .../sql-functions/json-functions/json_object.md    |   70 -
 .../sql-functions/json-functions/json_quote.md     |   70 -
 .../sql-manual/sql-functions/math-functions/abs.md |   62 -
 .../sql-functions/math-functions/conv.md           |   60 -
 .../sql-functions/math-functions/negative.md       |   51 -
 .../sql-functions/math-functions/pmod.md           |   53 -
 .../sql-functions/math-functions/positive.md       |   51 -
 .../sql-functions/math-functions/round.md          |   63 -
 .../sql-functions/math-functions/sqrt.md           |   57 -
 .../sql-functions/string-functions/concat_ws.md    |   63 -
 .../sql-functions/string-functions/ends_with.md    |   53 -
 .../sql-functions/string-functions/lcase.md        |   37 -
 .../sql-functions/string-functions/left.md         |   47 -
 .../sql-functions/string-functions/lower.md        |   47 -
 .../sql-functions/string-functions/ltrim.md        |   47 -
 .../sql-functions/string-functions/parse_url.md    |   46 -
 .../sql-functions/string-functions/reverse.md      |   56 -
 .../sql-functions/string-functions/right.md        |   47 -
 .../sql-functions/string-functions/rtrim.md        |   47 -
 .../sql-functions/string-functions/split_part.md   |   69 -
 .../sql-functions/string-functions/starts_with.md  |   53 -
 .../sql-functions/string-functions/strleft.md      |   47 -
 .../sql-functions/string-functions/strright.md     |   47 -
 .../sql-functions/string-functions/substring.md    |   72 -
 .../sql-functions/string-functions/trim.md         |   47 -
 .../sql-functions/string-functions/ucase.md        |   37 -
 .../sql-functions/string-functions/upper.md        |   47 -
 .../table-functions/explode-bitmap.md              |  148 --
 .../table-functions/explode-json-array.md          |  187 --
 .../table-functions/explode-numbers.md             |   57 -
 .../sql-functions/table-functions/explode-split.md |  108 -
 .../table-functions/outer-combinator.md            |   48 -
 .../window-functions/WINDOW-FUNCTION-LEAD.md       |   51 -
 .../WINDOW-FUNCTION-WINDOW-FUNNEL.md               |   62 -
 .../Account-Management-Statements/CREATE-USER.md   |   95 -
 .../Account-Management-Statements/DROP-ROLE.md     |   56 -
 .../Account-Management-Statements/GRANT.md         |  131 -
 .../Account-Management-Statements/LDAP.md          |   55 -
 .../Account-Management-Statements/REVOKE.md        |   68 -
 .../Account-Management-Statements/SET-PROPERTY.md  |  172 --
 .../ALTER-SYSTEM-ADD-FOLLOWER.md                   |   61 -
 .../ALTER-SYSTEM-ADD-OBSERVER.md                   |   61 -
 .../ALTER-SYSTEM-DECOMMISSION-BACKEND.md           |   63 -
 .../ALTER-SYSTEM-DROP-FOLLOWER.md                  |   61 -
 .../ALTER-SYSTEM-DROP-OBSERVER.md                  |   61 -
 .../Alter/ALTER-RESOURCE.md                        |   59 -
 .../Alter/ALTER-TABLE-COLUMN.md                    |  231 --
 .../Alter/ALTER-TABLE-PARTITION.md                 |  166 --
 .../Alter/ALTER-TABLE-PROPERTY.md                  |  271 --
 .../Alter/ALTER-TABLE-RENAME.md                    |   96 -
 .../Alter/ALTER-TABLE-ROLLUP.md                    |  139 -
 .../Backup-and-Restore/BACKUP.md                   |  168 --
 .../Backup-and-Restore/CREATE-REPOSITORY.md        |  148 --
 .../Backup-and-Restore/RESTORE.md                  |  120 -
 .../Create/CREATE-FUNCTION.md                      |  155 --
 .../Create/CREATE-MATERIALIZED-VIEW.md             |  239 --
 .../Create/CREATE-POLICY.md                        |   95 -
 .../Create/CREATE-RESOURCE.md                      |  119 -
 .../Create/CREATE-TABLE-AS-SELECT.md               |   83 -
 .../Create/CREATE-TABLE.md                         |  613 -----
 .../Drop/DROP-DATABASE.md                          |   61 -
 .../Drop/DROP-FUNCTION.md                          |   62 -
 .../Data-Definition-Statements/Drop/DROP-POLICY.md |   74 -
 .../Load/BROKER-LOAD.md                            |  443 ----
 .../Load/CANCEL-LOAD.md                            |   68 -
 .../Load/CREATE-ROUTINE-LOAD.md                    |  566 ----
 .../Load/CREATE-SYNC-JOB.md                        |  161 --
 .../Load/STREAM-LOAD.md                            |  420 ---
 .../Manipulation/DELETE.md                         |   87 -
 .../Manipulation/EXPORT.md                         |  222 --
 .../Manipulation/INSERT.md                         |  245 --
 .../Manipulation/SELECT.md                         |  396 ---
 .../Manipulation/UPDATE.md                         |   84 -
 .../Data-Manipulation-Statements/OUTFILE.md        |  302 ---
 .../sql-manual/sql-reference/Data-Types/BITMAP.md  |   48 -
 .../sql-manual/sql-reference/Data-Types/CHAR.md    |   34 -
 .../sql-manual/sql-reference/Data-Types/DATE.md    |   42 -
 .../sql-reference/Data-Types/DATETIME.md           |   35 -
 .../sql-manual/sql-reference/Data-Types/DECIMAL.md |   37 -
 .../sql-reference/Data-Types/QUANTILE-STATE.md     |   58 -
 .../sql-manual/sql-reference/Data-Types/STRING.md  |   37 -
 .../ADMIN-CHECK-TABLET.md                          |   64 -
 .../ADMIN-SHOW-CONFIG.md                           |   77 -
 .../INSTALL-PLUGIN.md                              |   80 -
 .../Database-Administration-Statements/RECOVER.md  |   89 -
 .../SET-VARIABLE.md                                |   90 -
 .../SHOW-ALTER-TABLE-MATERIALIZED-VIEW.md          |  120 -
 .../sql-reference/Show-Statements/SHOW-ALTER.md    |   80 -
 .../sql-reference/Show-Statements/SHOW-BACKENDS.md |   63 -
 .../sql-reference/Show-Statements/SHOW-COLUMNS.md  |   56 -
 .../Show-Statements/SHOW-CREATE-FUNCTION.md        |   61 -
 .../Show-Statements/SHOW-DATABASES.md              |   50 -
 .../Show-Statements/SHOW-FRONTENDS.md              |   59 -
 .../Show-Statements/SHOW-FUNCTIONS.md              |   93 -
 .../Show-Statements/SHOW-LOAD-PROFILE.md           |  185 --
 .../Show-Statements/SHOW-LOAD-WARNINGS.md          |   66 -
 .../sql-reference/Show-Statements/SHOW-LOAD.md     |  119 -
 .../Show-Statements/SHOW-PARTITION-ID.md           |   56 -
 .../Show-Statements/SHOW-PARTITIONS.md             |   79 -
 .../sql-reference/Show-Statements/SHOW-POLICY.md   |   79 -
 .../sql-reference/Show-Statements/SHOW-PROC.md     |  216 --
 .../Show-Statements/SHOW-PROCESSLIST.md            |   68 -
 .../Show-Statements/SHOW-QUERY-PROFILE.md          |  219 --
 .../sql-reference/Show-Statements/SHOW-ROLLUP.md   |   38 -
 .../sql-reference/Show-Statements/SHOW-STATUS.md   |   42 -
 .../Show-Statements/SHOW-STREAM-LOAD.md            |  100 -
 .../Show-Statements/SHOW-TABLE-STATUS.md           |   67 -
 .../sql-reference/Show-Statements/SHOW-TABLES.md   |   83 -
 .../sql-reference/Show-Statements/SHOW-TABLETS.md  |   80 -
 .../Show-Statements/SHOW-VARIABLES.md              |   76 -
 .../sql-reference/Utility-Statements/USE.md        |   57 -
 .../current/summary/basic-summary.md               |  100 -
 .../version-0.15.json                              |  138 -
 .../alter-table/alter-table-bitmap-index.md        |   82 -
 .../alter-table/alter-table-replace-table.md       |   73 -
 .../alter-table/alter-table-rollup.md              |  194 --
 .../alter-table/alter-table-schema-change.md       |  249 --
 .../alter-table/alter-table-temp-partition.md      |  298 ---
 .../administrator-guide/backup-restore.md          |  186 --
 .../administrator-guide/block-rule/sql-block.md    |   59 -
 .../version-0.15/administrator-guide/broker.md     |  282 --
 .../administrator-guide/bucket-shuffle-join.md     |  106 -
 .../administrator-guide/colocation-join.md         |  409 ---
 .../administrator-guide/config/be_config.md        | 1479 -----------
 .../administrator-guide/config/fe_config.md        | 2067 ---------------
 .../administrator-guide/config/user_property.md    |   73 -
 .../administrator-guide/dynamic-partition.md       |  458 ----
 .../administrator-guide/export-manual.md           |  202 --
 .../http-actions/cancel-label.md                   |   59 -
 .../http-actions/compaction-action.md              |  210 --
 .../http-actions/connection-action.md              |   42 -
 .../http-actions/fe-get-log-file.md                |   80 -
 .../http-actions/fe/bootstrap-action.md            |  125 -
 .../http-actions/fe/cancel-load-action.md          |   96 -
 .../http-actions/fe/check-decommission-action.md   |   84 -
 .../http-actions/fe/check-storage-type-action.md   |   84 -
 .../http-actions/fe/config-action.md               |   83 -
 .../http-actions/fe/connection-action.md           |   82 -
 .../http-actions/fe/get-ddl-stmt-action.md         |   92 -
 .../http-actions/fe/get-load-info-action.md        |   95 -
 .../http-actions/fe/get-load-state.md              |   88 -
 .../http-actions/fe/get-log-file-action.md         |  112 -
 .../http-actions/fe/get-small-file.md              |  101 -
 .../http-actions/fe/ha-action.md                   |   95 -
 .../http-actions/fe/hardware-info-action.md        |   80 -
 .../http-actions/fe/health-action.md               |   61 -
 .../http-actions/fe/log-action.md                  |   98 -
 .../http-actions/fe/logout-action.md               |   59 -
 .../http-actions/fe/manager/cluster-action.md      |   77 -
 .../http-actions/fe/manager/node-action.md         |  435 ----
 .../fe/manager/query-profile-action.md             |  308 ---
 .../http-actions/fe/meta-action.md                 |   60 -
 .../http-actions/fe/meta-info-action.md            |  232 --
 .../http-actions/fe/meta-replay-state-action.md    |   61 -
 .../http-actions/fe/profile-action.md              |   80 -
 .../http-actions/fe/query-detail-action.md         |  116 -
 .../http-actions/fe/query-profile-action.md        |  108 -
 .../http-actions/fe/row-count-action.md            |   84 -
 .../http-actions/fe/session-action.md              |   75 -
 .../http-actions/fe/set-config-action.md           |  149 --
 .../http-actions/fe/show-data-action.md            |  111 -
 .../http-actions/fe/show-meta-info-action.md       |  138 -
 .../http-actions/fe/show-proc-action.md            |  104 -
 .../http-actions/fe/show-runtime-info-action.md    |   84 -
 .../http-actions/fe/statement-execution-action.md  |  102 -
 .../http-actions/fe/system-action.md               |   93 -
 .../http-actions/fe/table-query-plan-action.md     |  113 -
 .../http-actions/fe/table-row-count-action.md      |   88 -
 .../http-actions/fe/table-schema-action.md         |  104 -
 .../http-actions/fe/upload-action.md               |  159 --
 .../http-actions/get-load-state.md                 |   59 -
 .../http-actions/get-tablets.md                    |   65 -
 .../http-actions/profile-action.md                 |  120 -
 .../http-actions/query-detail-action.md            |   59 -
 .../http-actions/restore-tablet.md                 |   43 -
 .../http-actions/show-data-action.md               |   35 -
 .../http-actions/tablet-migration-action.md        |   87 -
 .../http-actions/tablets_distribution.md           |  124 -
 .../version-0.15/administrator-guide/ldap.md       |  177 --
 .../load-data/batch-delete-manual.md               |  205 --
 .../load-data/binlog-load-manual.md                |  502 ----
 .../load-data/broker-load-manual.md                |  532 ----
 .../administrator-guide/load-data/delete-manual.md |  189 --
 .../load-data/insert-into-manual.md                |  289 ---
 .../load-data/load-json-format.md                  |  470 ----
 .../administrator-guide/load-data/load-manual.md   |  227 --
 .../load-data/routine-load-manual.md               |  331 ---
 .../load-data/s3-load-manual.md                    |   94 -
 .../load-data/sequence-column-manual.md            |  208 --
 .../load-data/spark-load-manual.md                 |  554 ----
 .../load-data/stream-load-manual.md                |  393 ---
 .../administrator-guide/materialized_view.md       |  496 ----
 .../administrator-guide/multi-tenant.md            |  222 --
 .../operation/be-olap-error-code.md                |  265 --
 .../administrator-guide/operation/disk-capacity.md |  163 --
 .../operation/doris-error-code.md                  |  179 --
 .../operation/metadata-operation.md                |  396 ---
 .../administrator-guide/operation/monitor-alert.md |  309 ---
 .../operation/monitor-metrics/be-metrics.md        |   84 -
 .../operation/monitor-metrics/fe-metrics.md        |  155 --
 .../administrator-guide/operation/multi-tenant.md  |  239 --
 .../operation/tablet-meta-tool.md                  |  148 --
 .../operation/tablet-repair-and-balance.md         |  688 -----
 .../operation/tablet-restore-tool.md               |  142 -
 .../version-0.15/administrator-guide/outfile.md    |  368 ---
 .../administrator-guide/partition_cache.md         |  197 --
 .../version-0.15/administrator-guide/privilege.md  |  234 --
 .../administrator-guide/query_cache.md             |  155 --
 .../administrator-guide/resource-management.md     |  170 --
 .../administrator-guide/running-profile.md         |  271 --
 .../administrator-guide/runtime-filter.md          |  279 --
 .../administrator-guide/segment-v2-usage.md        |  157 --
 .../administrator-guide/small-file-mgr.md          |  104 -
 .../version-0.15/administrator-guide/sql-mode.md   |   76 -
 .../version-0.15/administrator-guide/time-zone.md  |   91 -
 .../version-0.15/administrator-guide/update.md     |  126 -
 .../version-0.15/administrator-guide/variables.md  |  434 ----
 .../version-0.15/best-practices/fe-load-balance.md |  470 ----
 .../version-0.15/best-practices/samples.md         |   57 -
 .../best-practices/star-schema-benchmark.md        |  166 --
 .../version-0.15/best-practices/systemd.md         |   31 -
 .../version-0.15/extending-doris/audit-plugin.md   |  112 -
 .../version-0.15/extending-doris/datax.md          |  104 -
 .../version-0.15/extending-doris/doris-on-es.md    |  588 -----
 .../extending-doris/flink-doris-connector.md       |  287 ---
 .../version-0.15/extending-doris/logstash.md       |  198 --
 .../version-0.15/extending-doris/odbc-of-doris.md  |  269 --
 .../extending-doris/plugin-development-manual.md   |  312 ---
 .../extending-doris/spark-doris-connector.md       |  207 --
 .../udf/contrib/udaf-orthogonal-bitmap-manual.md   |  238 --
 .../extending-doris/udf/contribute-udf.md          |  124 -
 .../extending-doris/udf/user-defined-function.md   |  269 --
 .../version-0.15/getting-started/advance-usage.md  |  274 --
 .../version-0.15/getting-started/basic-usage.md    |  381 ---
 .../version-0.15/getting-started/best-practice.md  |  197 --
 .../getting-started/data-model-rollup.md           |  638 -----
 .../version-0.15/getting-started/data-partition.md |  401 ---
 .../version-0.15/getting-started/hit-the-rollup.md |  296 ---
 .../version-0.15/installing/compilation-arm.md     |  232 --
 .../version-0.15/installing/compilation.md         |  214 --
 .../version-0.15/installing/install-deploy.md      |  451 ----
 .../version-0.15/installing/upgrade.md             |   82 -
 .../internal/doris_storage_optimization.md         |  234 --
 .../internal/flink_doris_connector_design.md       |  272 --
 .../version-0.15/internal/grouping_sets_design.md  |  521 ----
 .../version-0.15/internal/metadata-design.md       |  126 -
 .../version-0.15/internal/spark_load.md            |  212 --
 .../Account-Management-Statements/ALTER-USER.md    |   38 -
 .../Account-Management-Statements/CREATE-ROLE.md   |   38 -
 .../Account-Management-Statements/CREATE-USER.md   |   38 -
 .../Account-Management-Statements/DROP-ROLE.md     |   38 -
 .../Account-Management-Statements/DROP-USER.md     |   38 -
 .../Account-Management-Statements/GRANT.md         |   38 -
 .../Account-Management-Statements/LDAP.md          |   38 -
 .../Account-Management-Statements/REVOKE.md        |   38 -
 .../Account-Management-Statements/SET-PASSWORD.md  |   38 -
 .../Account-Management-Statements/SET-PROPERTY.md  |   38 -
 .../ALTER-SYSTEM-ADD-BACKEND.md                    |   38 -
 .../ALTER-SYSTEM-ADD-FOLLOWER.md                   |   38 -
 .../ALTER-SYSTEM-ADD-OBSERVER.md                   |   38 -
 .../ALTER-SYSTEM-DECOMMISSION-BACKEND.md           |   38 -
 .../ALTER-SYSTEM-DROP-BACKEND.md                   |   38 -
 .../ALTER-SYSTEM-DROP-FOLLOWER.md                  |   38 -
 .../ALTER-SYSTEM-DROP-OBSERVER.md                  |   38 -
 .../ALTER-SYSTEM-MODIFY-BROKER.md                  |   38 -
 .../CANCEL-ALTER-SYSTEM.md                         |   38 -
 .../Alter/ALTER-DATABASE.md                        |   38 -
 .../Alter/ALTER-TABLE-COLUMN.md                    |   38 -
 .../Alter/ALTER-TABLE-PARTITION.md                 |   38 -
 .../Alter/ALTER-TABLE-PROPERTY.md                  |   38 -
 .../Alter/ALTER-TABLE-RENAME.md                    |   38 -
 .../Alter/ALTER-TABLE-REPLACE.md                   |   38 -
 .../Alter/ALTER-TABLE-ROLLUP.md                    |   38 -
 .../Data-Definition-Statements/Alter/ALTER-VIEW.md |   38 -
 .../Alter/CANCEL-ALTER-TABLE.md                    |   38 -
 .../Backup-and-Restore/BACKUP.md                   |   38 -
 .../Backup-and-Restore/CANCEL-BACKUP.md            |   38 -
 .../Backup-and-Restore/CANCEL-RESTORE.md           |   38 -
 .../Backup-and-Restore/CREATE-REPOSITORY.md        |   38 -
 .../Backup-and-Restore/DROP-REPOSITORY.md          |   38 -
 .../Backup-and-Restore/RESTORE.md                  |   38 -
 .../Create/CREATE-DATABASE.md                      |   38 -
 .../Create/CREATE-ENCRYPT-KEY.md                   |   38 -
 .../Create/CREATE-FILE.md                          |   38 -
 .../Create/CREATE-FUNCTION.md                      |   38 -
 .../Create/CREATE-INDEX.md                         |   38 -
 .../Create/CREATE-MATERIALIZED-VIEW.md             |   38 -
 .../Create/CREATE-RESOURCE.md                      |   38 -
 .../Create/CREATE-TABLE-LIKE.md                    |   38 -
 .../Create/CREATE-TABLE.md                         |  562 ----
 .../Create/CREATE-VIEW.md                          |   38 -
 .../Drop/DROP-DATABASE.md                          |   38 -
 .../Drop/DROP-ENCRYPT-KEY.md                       |   38 -
 .../Data-Definition-Statements/Drop/DROP-FILE.md   |   38 -
 .../Drop/DROP-FUNCTION.md                          |   38 -
 .../Data-Definition-Statements/Drop/DROP-INDEX.md  |   38 -
 .../Drop/DROP-MATERIALIZED-VIEW.md                 |   38 -
 .../Drop/DROP-RESOURCE.md                          |   38 -
 .../Data-Definition-Statements/Drop/DROP-TABLE.md  |   38 -
 .../Drop/TRUNCATE-TABLE.md                         |   38 -
 .../Load/ALTER-ROUTINE-LOAD.md                     |   38 -
 .../Load/BROKER-LOAD.md                            |   38 -
 .../Load/CANCEL-LOAD.md                            |   38 -
 .../Load/CREATE-ROUTINE-LOAD.md                    |   38 -
 .../Load/PAUSE-ROUTINE-LOAD.md                     |   38 -
 .../Load/RESUME-ROUTINE-LOAD.md                    |   38 -
 .../Load/STOP-ROUTINE-LOAD.md                      |   38 -
 .../Load/STREAM-LOAD.md                            |   38 -
 .../Manipulation/DELETE.md                         |   38 -
 .../Manipulation/INSERT.md                         |   38 -
 .../Manipulation/UPDATE.md                         |   38 -
 .../ADMIN-CANCEL-REPAIR.md                         |   38 -
 .../ADMIN-CHECK-TABLET.md                          |   38 -
 .../ADMIN-REPAIR-TABLE.md                          |   38 -
 .../ADMIN-SET-CONFIG.md                            |   38 -
 .../ADMIN-SET-REPLICA-STATUS.md                    |   38 -
 .../ADMIN-SHOW-CONFIG.md                           |   38 -
 .../ADMIN-SHOW-REPLICA-DISTRIBUTION.md             |   38 -
 .../ADMIN-SHOW-REPLICA-STATUS.md                   |   38 -
 .../ENABLE-FEATURE.md                              |   38 -
 .../INSTALL-PLUGIN.md                              |   38 -
 .../Database-Administration-Statements/KILL.md     |   38 -
 .../Database-Administration-Statements/RECOVER.md  |   38 -
 .../SET-VARIABLE.md                                |   38 -
 .../UNINSTALL-PLUGIN.md                            |   38 -
 .../sql-statements/Show-Statements/SHOW-ALTER.md   |   38 -
 .../Show-Statements/SHOW-BACKENDS.md               |   38 -
 .../sql-statements/Show-Statements/SHOW-BACKUP.md  |   38 -
 .../sql-statements/Show-Statements/SHOW-BROKER.md  |   38 -
 .../sql-statements/Show-Statements/SHOW-CHARSET.md |   38 -
 .../Show-Statements/SHOW-COLLATION.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-COLUMNS.md |   38 -
 .../Show-Statements/SHOW-CREATE-DATABASE.md        |   38 -
 .../Show-Statements/SHOW-CREATE-FUNCTION.md        |   38 -
 .../Show-Statements/SHOW-CREATE-ROUTINE-LOAD.md    |   38 -
 .../Show-Statements/SHOW-CREATE-TABLE.md           |   38 -
 .../sql-statements/Show-Statements/SHOW-DATA.md    |   38 -
 .../Show-Statements/SHOW-DATABASE-ID.md            |   38 -
 .../Show-Statements/SHOW-DATABASES.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-DELETE.md  |   38 -
 .../Show-Statements/SHOW-DYNAMIC-PARTITION.md      |   38 -
 .../Show-Statements/SHOW-ENCRYPT-KEY.md            |   38 -
 .../sql-statements/Show-Statements/SHOW-ENGINES.md |   38 -
 .../sql-statements/Show-Statements/SHOW-EVENTS.md  |   38 -
 .../sql-statements/Show-Statements/SHOW-EXPORT.md  |   38 -
 .../Show-Statements/SHOW-FRONTENDS.md              |   38 -
 .../Show-Statements/SHOW-FUNCTIONS.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-GRANTS.md  |   38 -
 .../sql-statements/Show-Statements/SHOW-INDEX.md   |   38 -
 .../Show-Statements/SHOW-LOAD-PROFILE.md           |   38 -
 .../Show-Statements/SHOW-LOAD-WARNINGS.md          |   38 -
 .../sql-statements/Show-Statements/SHOW-LOAD.md    |   38 -
 .../Show-Statements/SHOW-MIGRATIONS.md             |   38 -
 .../Show-Statements/SHOW-OPEN-TABLES.md            |   38 -
 .../Show-Statements/SHOW-PARTITION-ID.md           |   38 -
 .../Show-Statements/SHOW-PARTITIONS.md             |   38 -
 .../sql-statements/Show-Statements/SHOW-PLUGINS.md |   38 -
 .../sql-statements/Show-Statements/SHOW-PROC.md    |   38 -
 .../Show-Statements/SHOW-PROCEDURE.md              |   38 -
 .../Show-Statements/SHOW-PROCESSLIST.md            |   38 -
 .../Show-Statements/SHOW-PROPERTY.md               |   83 -
 .../Show-Statements/SHOW-QUERY-PROFILE.md          |   38 -
 .../Show-Statements/SHOW-REPOSITORIES.md           |   38 -
 .../Show-Statements/SHOW-RESOURCES.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-RESTORE.md |   38 -
 .../sql-statements/Show-Statements/SHOW-ROLES.md   |   38 -
 .../sql-statements/Show-Statements/SHOW-ROLLUP.md  |   38 -
 .../Show-Statements/SHOW-ROUTINE-LOAD-TASK.md      |   38 -
 .../Show-Statements/SHOW-ROUTINE-LOAD.md           |   38 -
 .../Show-Statements/SHOW-SMALL-FILES.md            |   38 -
 .../Show-Statements/SHOW-SNAPSHOT.md               |   38 -
 .../sql-statements/Show-Statements/SHOW-STATUS.md  |   38 -
 .../Show-Statements/SHOW-STREAM-LOAD.md            |   38 -
 .../Show-Statements/SHOW-TABLE-ID.md               |   38 -
 .../Show-Statements/SHOW-TABLE-STATUS.md           |   38 -
 .../sql-statements/Show-Statements/SHOW-TABLET.md  |   38 -
 .../Show-Statements/SHOW-TRANSACTION.md            |   38 -
 .../Show-Statements/SHOW-TRIGGERS.md               |   38 -
 .../sql-statements/Show-Statements/SHOW-USER.md    |   38 -
 .../Show-Statements/SHOW-VARIABLES.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-VIEW.md    |   38 -
 .../sql-statements/Show-Statements/SHOW-WARNING.md |   38 -
 .../Show-Statements/SHOW-WHITE-LIST.md             |   38 -
 .../sql-statements/Utility-Statements/DESCRIBE.md  |   38 -
 .../sql-statements/Utility-Statements/HELP.md      |   38 -
 .../sql-statements/Utility-Statements/USE.md       |   38 -
 .../aggregate-functions/approx_count_distinct.md   |   48 -
 .../sql-functions/aggregate-functions/avg.md       |   57 -
 .../aggregate-functions/bitmap_union.md            |  146 --
 .../sql-functions/aggregate-functions/count.md     |   61 -
 .../aggregate-functions/hll_union_agg.md           |   52 -
 .../sql-functions/aggregate-functions/max.md       |   46 -
 .../sql-functions/aggregate-functions/min.md       |   46 -
 .../aggregate-functions/percentile.md              |   50 -
 .../aggregate-functions/percentile_approx.md       |   59 -
 .../sql-functions/aggregate-functions/stddev.md    |   53 -
 .../aggregate-functions/stddev_samp.md             |   46 -
 .../sql-functions/aggregate-functions/sum.md       |   46 -
 .../sql-functions/aggregate-functions/topn.md      |   60 -
 .../sql-functions/aggregate-functions/var_samp.md  |   47 -
 .../sql-functions/aggregate-functions/variance.md  |   54 -
 .../sql-functions/bitmap-functions/bitmap_and.md   |   55 -
 .../bitmap-functions/bitmap_contains.md            |   55 -
 .../sql-functions/bitmap-functions/bitmap_empty.md |   52 -
 .../bitmap-functions/bitmap_from_string.md         |   63 -
 .../bitmap-functions/bitmap_has_any.md             |   55 -
 .../sql-functions/bitmap-functions/bitmap_hash.md  |   52 -
 .../bitmap-functions/bitmap_intersect.md           |   62 -
 .../sql-functions/bitmap-functions/bitmap_min.md   |   55 -
 .../sql-functions/bitmap-functions/bitmap_not.md   |   55 -
 .../sql-functions/bitmap-functions/bitmap_or.md    |   55 -
 .../bitmap-functions/bitmap_to_string.md           |   69 -
 .../sql-functions/bitmap-functions/bitmap_union.md |   59 -
 .../sql-functions/bitmap-functions/bitmap_xor.md   |   55 -
 .../sql-functions/bitmap-functions/to_bitmap.md    |   53 -
 .../sql-reference/sql-functions/cast.md            |   82 -
 .../date-time-functions/convert_tz.md              |   57 -
 .../sql-functions/date-time-functions/curdate.md   |   55 -
 .../date-time-functions/current_timestamp.md       |   49 -
 .../sql-functions/date-time-functions/curtime.md   |   50 -
 .../sql-functions/date-time-functions/date_add.md  |   55 -
 .../date-time-functions/date_format.md             |  160 --
 .../sql-functions/date-time-functions/date_sub.md  |   55 -
 .../sql-functions/date-time-functions/datediff.md  |   58 -
 .../sql-functions/date-time-functions/day.md       |   49 -
 .../sql-functions/date-time-functions/dayname.md   |   50 -
 .../date-time-functions/dayofmonth.md              |   51 -
 .../sql-functions/date-time-functions/dayofweek.md |   58 -
 .../sql-functions/date-time-functions/dayofyear.md |   51 -
 .../sql-functions/date-time-functions/from_days.md |   49 -
 .../date-time-functions/from_unixtime.md           |   89 -
 .../sql-functions/date-time-functions/hour.md      |   49 -
 .../sql-functions/date-time-functions/makedate.md  |   46 -
 .../sql-functions/date-time-functions/minute.md    |   49 -
 .../sql-functions/date-time-functions/month.md     |   51 -
 .../sql-functions/date-time-functions/monthname.md |   51 -
 .../sql-functions/date-time-functions/now.md       |   49 -
 .../sql-functions/date-time-functions/second.md    |   49 -
 .../date-time-functions/str_to_date.md             |   72 -
 .../date-time-functions/time_round.md              |   86 -
 .../sql-functions/date-time-functions/timediff.md  |   65 -
 .../date-time-functions/timestampadd.md            |   59 -
 .../date-time-functions/timestampdiff.md           |   67 -
 .../sql-functions/date-time-functions/to_date.md   |   48 -
 .../sql-functions/date-time-functions/to_days.md   |   51 -
 .../date-time-functions/unix_timestamp.md          |   86 -
 .../date-time-functions/utc_timestamp.md           |   53 -
 .../sql-functions/date-time-functions/week.md      |   76 -
 .../date-time-functions/weekofyear.md              |   52 -
 .../sql-functions/date-time-functions/year.md      |   51 -
 .../sql-functions/date-time-functions/yearweek.md  |   80 -
 .../sql-reference/sql-functions/digital-masking.md |   56 -
 .../hash-functions/murmur_hash3_32.md              |   61 -
 .../sql-functions/spatial-functions/st_astext.md   |   47 -
 .../sql-functions/spatial-functions/st_circle.md   |   48 -
 .../sql-functions/spatial-functions/st_contains.md |   54 -
 .../spatial-functions/st_distance_sphere.md        |   47 -
 .../spatial-functions/st_geometryfromtext.md       |   47 -
 .../spatial-functions/st_linefromtext.md           |   47 -
 .../sql-functions/spatial-functions/st_point.md    |   48 -
 .../sql-functions/spatial-functions/st_polygon.md  |   47 -
 .../sql-functions/spatial-functions/st_x.md        |   47 -
 .../sql-functions/spatial-functions/st_y.md        |   47 -
 .../append_trailing_char_if_absent.md              |   60 -
 .../sql-functions/string-functions/ascii.md        |   54 -
 .../sql-functions/string-functions/bit_length.md   |   54 -
 .../sql-functions/string-functions/char_length.md  |   54 -
 .../sql-functions/string-functions/concat.md       |   61 -
 .../sql-functions/string-functions/concat_ws.md    |   63 -
 .../sql-functions/string-functions/ends_with.md    |   53 -
 .../sql-functions/string-functions/find_in_set.md  |   47 -
 .../string-functions/get_json_double.md            |   74 -
 .../sql-functions/string-functions/get_json_int.md |   74 -
 .../string-functions/get_json_string.md            |   84 -
 .../sql-functions/string-functions/group_concat.md |   63 -
 .../sql-functions/string-functions/instr.md        |   54 -
 .../sql-functions/string-functions/json_array.md   |   70 -
 .../sql-functions/string-functions/json_object.md  |   70 -
 .../sql-functions/string-functions/json_quote.md   |   70 -
 .../sql-functions/string-functions/lcase.md        |   37 -
 .../sql-functions/string-functions/left.md         |   47 -
 .../sql-functions/string-functions/length.md       |   54 -
 .../sql-functions/string-functions/like/like.md    |   83 -
 .../string-functions/like/not_like.md              |   85 -
 .../sql-functions/string-functions/locate.md       |   61 -
 .../sql-functions/string-functions/lower.md        |   47 -
 .../sql-functions/string-functions/lpad.md         |   54 -
 .../sql-functions/string-functions/ltrim.md        |   47 -
 .../sql-functions/string-functions/money_format.md |   61 -
 .../string-functions/null_or_empty.md              |   60 -
 .../string-functions/regexp/not_regexp.md          |   56 -
 .../string-functions/regexp/regexp.md              |   56 -
 .../string-functions/regexp/regexp_extract.md      |   51 -
 .../string-functions/regexp/regexp_replace.md      |   54 -
 .../sql-functions/string-functions/repeat.md       |   54 -
 .../sql-functions/string-functions/replace.md      |   46 -
 .../sql-functions/string-functions/reverse.md      |   56 -
 .../sql-functions/string-functions/right.md        |   47 -
 .../sql-functions/string-functions/rpad.md         |   54 -
 .../sql-functions/string-functions/split_part.md   |   69 -
 .../sql-functions/string-functions/starts_with.md  |   53 -
 .../sql-functions/string-functions/strleft.md      |   47 -
 .../sql-functions/string-functions/strright.md     |   47 -
 .../sql-reference/sql-functions/window-function.md |  487 ----
 .../Account-Management/CREATE-ROLE.md              |   45 -
 .../Account-Management/CREATE-USER.md              |   76 -
 .../sql-statements/Account-Management/DROP-ROLE.md |   44 -
 .../sql-statements/Account-Management/DROP-USER.md |   50 -
 .../sql-statements/Account-Management/GRANT.md     |  110 -
 .../sql-statements/Account-Management/REVOKE.md    |   55 -
 .../Account-Management/SET-PASSWORD.md             |   56 -
 .../Account-Management/SET-PROPERTY.md             |   98 -
 .../Account-Management/SHOW-GRANTS.md              |   57 -
 .../Account-Management/SHOW-ROLES.md               |   42 -
 .../Administration/ADMIN-CANCEL-REPAIR.md          |   48 -
 .../Administration/ADMIN-CHECK-TABLET.md           |   57 -
 .../Administration/ADMIN-CLEAN-TRASH.md            |   47 -
 .../sql-statements/Administration/ADMIN-REPAIR.md  |   53 -
 .../Administration/ADMIN-SET-CONFIG.md             |   44 -
 .../Administration/ADMIN-SET-REPLICA-STATUS.md     |   62 -
 .../Administration/ADMIN-SHOW-CONFIG.md            |   63 -
 .../Administration/ADMIN-SHOW-DATA-SKEW.md         |   50 -
 .../ADMIN-SHOW-REPLICA-DISTRIBUTION.md             |   52 -
 .../Administration/ADMIN-SHOW-REPLICA-STATUS.md    |   65 -
 .../sql-statements/Administration/ALTER-CLUSTER.md |   54 -
 .../sql-statements/Administration/ALTER-SYSTEM.md  |  130 -
 .../Administration/CANCEL-DECOMMISSION.md          |   41 -
 .../Administration/CREATE-CLUSTER.md               |   62 -
 .../sql-statements/Administration/CREATE-FILE.md   |   77 -
 .../sql-statements/Administration/DROP-CLUSTER.md  |   44 -
 .../sql-statements/Administration/DROP-FILE.md     |   51 -
 .../sql-statements/Administration/ENTER.md         |   44 -
 .../Administration/INSTALL-PLUGIN.md               |   63 -
 .../sql-statements/Administration/LINK-DATABASE.md |   51 -
 .../Administration/MIGRATE-DATABASE.md             |   47 -
 .../Administration/SET-LDAP-ADMIN-PASSWORD.md      |   45 -
 .../sql-statements/Administration/SHOW-BACKENDS.md |   49 -
 .../sql-statements/Administration/SHOW-BROKER.md   |   41 -
 .../sql-statements/Administration/SHOW-FILE.md     |   53 -
 .../Administration/SHOW-FRONTENDS.md               |   44 -
 .../Administration/SHOW-FULL-COLUMNS.md            |   40 -
 .../sql-statements/Administration/SHOW-INDEX.md    |   44 -
 .../Administration/SHOW-MIGRATIONS.md              |   38 -
 .../sql-statements/Administration/SHOW-PLUGINS.md  |   45 -
 .../Administration/SHOW-TABLE-STATUS.md            |   48 -
 .../sql-statements/Administration/SHOW-TRASH.md    |   49 -
 .../sql-statements/Administration/SHOW-VIEW.md     |   39 -
 .../Administration/UNINSTALL-PLUGIN.md             |   47 -
 .../Data-Definition/ALTER-DATABASE.md              |   62 -
 .../sql-statements/Data-Definition/ALTER-TABLE.md  |  422 ---
 .../sql-statements/Data-Definition/ALTER-VIEW.md   |   52 -
 .../sql-statements/Data-Definition/BACKUP.md       |   65 -
 .../sql-statements/Data-Definition/CANCEL-ALTER.md |   69 -
 .../Data-Definition/CANCEL-BACKUP.md               |   39 -
 .../Data-Definition/CANCEL-RESTORE.md              |   42 -
 .../Data-Definition/CREATE-DATABASE.md             |   39 -
 .../Data-Definition/CREATE-ENCRYPTKEY.md           |   80 -
 .../sql-statements/Data-Definition/CREATE-INDEX.md |   45 -
 .../Data-Definition/CREATE-MATERIALIZED-VIEW.md    |  237 --
 .../Data-Definition/CREATE-REPOSITORY.md           |   88 -
 .../Data-Definition/CREATE-RESOURCE.md             |   73 -
 .../Data-Definition/CREATE-TABLE-LIKE.md           |   78 -
 .../sql-statements/Data-Definition/CREATE-TABLE.md |  834 ------
 .../sql-statements/Data-Definition/CREATE-VIEW.md  |   64 -
 .../Data-Definition/DROP-DATABASE.md               |   42 -
 .../Data-Definition/DROP-ENCRYPTKEY.md             |   55 -
 .../sql-statements/Data-Definition/DROP-INDEX.md   |   37 -
 .../Data-Definition/DROP-MATERIALIZED-VIEW.md      |  108 -
 .../Data-Definition/DROP-REPOSITORY.md             |   42 -
 .../Data-Definition/DROP-RESOURCE.md               |   39 -
 .../sql-statements/Data-Definition/DROP-TABLE.md   |   46 -
 .../sql-statements/Data-Definition/DROP-VIEW.md    |   40 -
 .../sql-statements/Data-Definition/HLL.md          |  109 -
 .../sql-statements/Data-Definition/RECOVER.md      |   54 -
 .../sql-statements/Data-Definition/RESTORE.md      |   78 -
 .../Data-Definition/SHOW-ENCRYPTKEYS.md            |   68 -
 .../Data-Definition/SHOW-RESOURCES.md              |   64 -
 .../Data-Definition/TRUNCATE-TABLE.md              |   53 -
 .../Data-Definition/create-function.md             |  140 -
 .../Data-Definition/drop-function.md               |   56 -
 .../Data-Definition/show-functions.md              |   85 -
 .../sql-statements/Data-Manipulation/BEGIN.md      |   93 -
 .../Data-Manipulation/BROKER-LOAD.md               |  599 -----
 .../Data-Manipulation/CANCEL-LOAD.md               |   46 -
 .../Data-Manipulation/CREATE-SYNC-JOB.md           |  166 --
 .../sql-statements/Data-Manipulation/DELETE.md     |   66 -
 .../sql-statements/Data-Manipulation/EXPORT.md     |  102 -
 .../sql-statements/Data-Manipulation/GROUP-BY.md   |  170 --
 .../sql-statements/Data-Manipulation/LOAD.md       |  292 ---
 .../sql-statements/Data-Manipulation/MINI-LOAD.md  |  139 -
 .../sql-statements/Data-Manipulation/MULTI-LOAD.md |  108 -
 .../Data-Manipulation/PAUSE-ROUTINE-LOAD.md        |   40 -
 .../Data-Manipulation/PAUSE-SYNC-JOB.md            |   43 -
 .../Data-Manipulation/RESUME-ROUTINE-LOAD.md       |   41 -
 .../Data-Manipulation/RESUME-SYNC-JOB.md           |   44 -
 .../Data-Manipulation/ROUTINE-LOAD.md              |  540 ----
 .../sql-statements/Data-Manipulation/SHOW-ALTER.md |   55 -
 .../Data-Manipulation/SHOW-BACKUP.md               |   63 -
 .../Data-Manipulation/SHOW-CREATE-FUNCTION.md      |   43 -
 .../Data-Manipulation/SHOW-CREATE-ROUTINE-LOAD.md  |   44 -
 .../sql-statements/Data-Manipulation/SHOW-DATA.md  |  113 -
 .../Data-Manipulation/SHOW-DATABASE-ID.md          |   39 -
 .../Data-Manipulation/SHOW-DATABASES.md            |   35 -
 .../Data-Manipulation/SHOW-DELETE.md               |   39 -
 .../SHOW-DYNAMIC-PARTITION-TABLES.md               |   39 -
 .../Data-Manipulation/SHOW-EXPORT.md               |   66 -
 .../sql-statements/Data-Manipulation/SHOW-LOAD.md  |   75 -
 .../Data-Manipulation/SHOW-PARTITION-ID.md         |   39 -
 .../Data-Manipulation/SHOW-PARTITIONS.md           |   49 -
 .../Data-Manipulation/SHOW-PROPERTY.md             |   42 -
 .../Data-Manipulation/SHOW-REPOSITORIES.md         |   49 -
 .../Data-Manipulation/SHOW-RESTORE.md              |   67 -
 .../Data-Manipulation/SHOW-ROUTINE-LOAD-TASK.md    |   35 -
 .../Data-Manipulation/SHOW-ROUTINE-LOAD.md         |   58 -
 .../Data-Manipulation/SHOW-SNAPSHOT.md             |   57 -
 .../Data-Manipulation/SHOW-STREAM-LOAD.md          |   69 -
 .../Data-Manipulation/SHOW-SYNC-JOB.md             |   49 -
 .../Data-Manipulation/SHOW-TABLE-ID.md             |   39 -
 .../Data-Manipulation/SHOW-TABLES.md               |   35 -
 .../Data-Manipulation/SHOW-TABLET.md               |   67 -
 .../Data-Manipulation/SHOW-TRANSACTION.md          |   92 -
 .../sql-statements/Data-Manipulation/SPARK-LOAD.md |  265 --
 .../Data-Manipulation/STOP-ROUTINE-LOAD.md         |   36 -
 .../Data-Manipulation/STOP-SYNC-JOB.md             |   44 -
 .../Data-Manipulation/STREAM-LOAD.md               |  221 --
 .../sql-statements/Data-Manipulation/UPDATE.md     |   75 -
 .../Data-Manipulation/alter-routine-load.md        |  119 -
 .../sql-statements/Data-Manipulation/insert.md     |  111 -
 .../sql-statements/Data-Types/BIGINT.md            |   34 -
 .../sql-statements/Data-Types/BITMAP.md            |   48 -
 .../sql-statements/Data-Types/BOOLEAN.md           |   34 -
 .../sql-statements/Data-Types/CHAR.md              |   34 -
 .../sql-statements/Data-Types/DATE.md              |   42 -
 .../sql-statements/Data-Types/DATETIME.md          |   35 -
 .../sql-statements/Data-Types/DECIMAL.md           |   35 -
 .../sql-statements/Data-Types/DOUBLE.md            |   34 -
 .../sql-statements/Data-Types/FLOAT.md             |   34 -
 .../sql-reference/sql-statements/Data-Types/HLL.md |   48 -
 .../sql-reference/sql-statements/Data-Types/INT.md |   34 -
 .../sql-statements/Data-Types/LARGEINT.md          |   33 -
 .../sql-statements/Data-Types/SMALLINT.md          |   34 -
 .../sql-statements/Data-Types/STRING.md            |   36 -
 .../sql-statements/Data-Types/TINYINT.md           |   34 -
 .../sql-statements/Data-Types/VARCHAR.md           |   36 -
 .../sql-statements/Utility/DESCRIBE.md             |   48 -
 .../version-1.2.json                               |  310 +++
 .../version-1.2/admin-manual/certificate.md        |   78 +
 .../cluster-management/elastic-expansion.md        |  149 ++
 .../admin-manual/cluster-management/fqdn.md        |   97 +
 .../cluster-management/load-balancing.md           |  635 +++++
 .../admin-manual/cluster-management/upgrade.md     |  104 +
 .../version-1.2/admin-manual/config/be-config.md   | 1443 +++++++++++
 .../version-1.2/admin-manual/config/config-dir.md  |   49 +
 .../admin-manual/config/fe-config-template.md      |  132 +
 .../version-1.2/admin-manual/config/fe-config.md   | 2705 ++++++++++++++++++++
 .../admin-manual/config/user-property.md           |    0
 .../version-1.2/admin-manual/data-admin/backup.md  |  233 ++
 .../admin-manual/data-admin/delete-recover.md      |    0
 .../admin-manual/data-admin/restore.md             |    0
 .../version-1.2/admin-manual/fe-certificate.md     |   46 +
 .../http-actions/be/be-version-info-action.md      |   99 +
 .../http-actions/be}/check-reset-rpc-cache.md      |    0
 .../http-actions/be/check-tablet-segment-action.md |   53 +
 .../http-actions/be/compaction-action.md           |  212 ++
 .../admin-manual/http-actions/be}/get-tablets.md   |    0
 .../admin-manual/http-actions/be/pad_rowset.md     |   43 +
 .../http-actions/be}/restore-tablet.md             |    0
 .../http-actions/be}/tablet-migration-action.md    |    0
 .../http-actions/be}/tablets_distribution.md       |    0
 .../http-actions/fe/backends-action.md             |    0
 .../http-actions/fe/bootstrap-action.md            |  125 +
 .../http-actions/fe/cancel-load-action.md          |  101 +
 .../http-actions/fe/check-decommission-action.md   |    0
 .../http-actions/fe/check-storage-type-action.md   |    0
 .../admin-manual/http-actions/fe/cluster-action.md |   89 +
 .../http-actions/fe/colocate-meta-action.md        |   59 +
 .../admin-manual/http-actions/fe/config-action.md  |   85 +
 .../http-actions/fe/connection-action.md           |    0
 .../http-actions/fe/extra-basepath-action.md       |   58 +
 .../http-actions/fe/fe-version-info-action.md      |  101 +
 .../http-actions/fe/get-ddl-stmt-action.md         |    0
 .../http-actions/fe/get-load-info-action.md        |    0
 .../admin-manual/http-actions/fe/get-load-state.md |   98 +
 .../http-actions/fe/get-log-file-action.md         |    0
 .../admin-manual/http-actions/fe/get-small-file.md |  101 +
 .../admin-manual/http-actions/fe/ha-action.md      |    0
 .../http-actions/fe/hardware-info-action.md        |    0
 .../admin-manual/http-actions/fe/health-action.md  |    0
 .../admin-manual/http-actions/fe/help-action.md    |   61 +
 .../admin-manual/http-actions/fe/import-action.md  |   53 +
 .../admin-manual/http-actions/fe/log-action.md     |    0
 .../admin-manual/http-actions/fe/login-action.md   |   70 +
 .../admin-manual/http-actions/fe/logout-action.md  |    0
 .../admin-manual/http-actions/fe/meta-action.md    |    0
 .../http-actions/fe/meta-info-action-V2.md         |   72 +
 .../http-actions/fe/meta-info-action.md            |    0
 .../http-actions/fe/meta-replay-state-action.md    |    0
 .../admin-manual/http-actions/fe/metrics-action.md |   55 +
 .../admin-manual/http-actions/fe/node-action.md    |  621 +++++
 .../admin-manual/http-actions/fe/profile-action.md |  166 ++
 .../http-actions/fe/query-detail-action.md         |    0
 .../fe/query-profile-action-controller.md          |  108 +
 .../http-actions/fe/query-profile-action.md        |  476 ++++
 .../http-actions/fe/query-schema-action.md         |  107 +
 .../http-actions/fe/row-count-action.md            |    0
 .../admin-manual/http-actions/fe/session-action.md |    0
 .../http-actions/fe/set-config-action.md           |    0
 .../http-actions/fe/show-data-action.md            |    0
 .../http-actions/fe/show-meta-info-action.md       |    0
 .../http-actions/fe/show-proc-action.md            |    0
 .../http-actions/fe/show-runtime-info-action.md    |    0
 .../http-actions/fe/statement-execution-action.md  |    0
 .../http-actions/fe/statistic-action.md            |   58 +
 .../admin-manual/http-actions/fe/system-action.md  |    0
 .../http-actions/fe/table-query-plan-action.md     |    0
 .../http-actions/fe/table-row-count-action.md      |    0
 .../http-actions/fe/table-schema-action.md         |  155 ++
 .../admin-manual/http-actions/fe/upload-action.md  |    0
 .../maint-monitor/be-olap-error-code.md            |  261 ++
 .../admin-manual/maint-monitor/disk-capacity.md    |    0
 .../admin-manual/maint-monitor/doris-error-code.md |    0
 .../memory-management/be-oom-analysis.md           |   84 +
 .../memory-limit-exceeded-analysis.md              |  179 ++
 .../memory-management/memory-tracker.md            |   98 +
 .../maint-monitor/metadata-operation.md            |  410 +++
 .../admin-manual/maint-monitor/monitor-alert.md    |  312 +++
 .../maint-monitor/monitor-metrics/metrics.md       |  343 +++
 .../maint-monitor/tablet-local-debug.md            |  224 ++
 .../admin-manual/maint-monitor/tablet-meta-tool.md |    0
 .../maint-monitor/tablet-repair-and-balance.md     |  783 ++++++
 .../maint-monitor/tablet-restore-tool.md           |    0
 .../admin-manual/multi-tenant.md                   |    0
 .../admin-manual/optimization.md                   |    0
 .../admin-manual/privilege-ldap/ldap.md            |  190 ++
 .../admin-manual/privilege-ldap/user-privilege.md  |  278 ++
 .../version-1.2/admin-manual/query-profile.md      |  280 ++
 .../admin-manual/sql-interception.md               |    0
 .../admin-manual/system-table/rowsets.md           |   86 +
 .../version-1.2/admin-manual/tracing.md            |  206 ++
 .../advanced/alter-table/replace-table.md          |   71 +
 .../advanced/alter-table/schema-change.md          |  294 +++
 .../version-1.2/advanced/autobucket.md             |  175 ++
 .../advanced/best-practice/compaction.md           |   71 +
 .../advanced/best-practice/debug-log.md            |    0
 .../advanced/best-practice/import-analysis.md      |  201 ++
 .../advanced/best-practice/query-analysis.md       |  674 +++++
 .../version-1.2/advanced/broker.md                 |  243 ++
 .../advanced/cache/partition-cache.md              |    0
 .../version-1.2/advanced/cold_hot_separation.md    |  130 +
 .../version-1.2/advanced/compute_node.md           |  111 +
 .../version-1.2/advanced/lateral-view.md           |   94 +
 .../advanced/orthogonal-bitmap-manual.md           |  205 ++
 .../advanced/partition/dynamic-partition.md        |  549 ++++
 .../advanced/partition/table-temp-partition.md     |  286 +++
 .../version-1.2/advanced/resource.md               |  148 ++
 .../advanced/small-file-mgr.md                     |    0
 .../{current => version-1.2}/advanced/sql-mode.md  |    0
 .../{current => version-1.2}/advanced/time-zone.md |    0
 .../{current => version-1.2}/advanced/using-hll.md |    0
 .../version-1.2/advanced/variables-template.md     |  115 +
 .../version-1.2/advanced/variables.md              |  657 +++++
 .../version-1.2/benchmark/ssb.md                   |  613 +++++
 .../version-1.2/benchmark/tpch.md                  |  881 +++++++
 .../data-operate/export/export-manual.md           |  235 ++
 .../data-operate/export/export_with_mysql_dump.md  |    0
 .../data-operate/export/outfile.md                 |    0
 .../import/import-scenes/external-storage-load.md  |  199 ++
 .../import/import-scenes/external-table-load.md    |  130 +
 .../data-operate/import/import-scenes/jdbc-load.md |  163 ++
 .../import/import-scenes/kafka-load.md             |  134 +
 .../import/import-scenes/load-atomicity.md         |   49 +
 .../import/import-scenes/load-data-convert.md      |  366 +++
 .../import/import-scenes/load-strict-mode.md       |    0
 .../import/import-scenes/local-file-load.md        |  276 ++
 .../import/import-way/binlog-load-manual.md        |  537 ++++
 .../import/import-way/broker-load-manual.md        |    0
 .../import/import-way/insert-into-manual.md        |  281 ++
 .../import/import-way/load-json-format.md          |  563 ++++
 .../import/import-way/mysql-load-manual.md         |  155 ++
 .../import/import-way/routine-load-manual.md       |  440 ++++
 .../import/import-way/s3-load-manual.md            |  111 +
 .../import/import-way/spark-load-manual.md         |  747 ++++++
 .../import/import-way/stream-load-manual.md        |  444 ++++
 .../version-1.2/data-operate/import/load-manual.md |  104 +
 .../update-delete/batch-delete-manual.md           |  327 +++
 .../data-operate/update-delete/delete-manual.md    |    0
 .../update-delete/sequence-column-manual.md        |  272 ++
 .../data-operate/update-delete/update.md           |  130 +
 .../version-1.2/data-table/basic-usage.md          |  712 ++++++
 .../version-1.2/data-table/best-practice.md        |  182 ++
 .../version-1.2/data-table/data-model.md           |  557 ++++
 .../version-1.2/data-table/data-partition.md       |  427 +++
 .../version-1.2/data-table/dynamic-schema-table.md |  133 +
 .../version-1.2/data-table/hit-the-rollup.md       |  452 ++++
 .../version-1.2/data-table/index/bitmap-index.md   |   86 +
 .../data-table/index/bloomfilter.md                |    0
 .../version-1.2/data-table/index/inverted-index.md |  403 +++
 .../data-table/index/ngram-bloomfilter-index.md    |   84 +
 .../version-1.2/data-table/index/prefix-index.md   |   86 +
 .../version-1.2/ecosystem/audit-plugin.md          |  144 ++
 .../version-1.2/ecosystem/beats.md                 |  282 ++
 .../version-1.2/ecosystem/cloudcanal.md            |  114 +
 .../version-1.2/ecosystem/datax.md                 |  395 +++
 .../version-1.2/ecosystem/flink-doris-connector.md |  524 ++++
 .../version-1.2/ecosystem/hive-bitmap-udf.md       |  120 +
 .../version-1.2/ecosystem/kyuubi.md                |  113 +
 .../version-1.2/ecosystem/logstash.md              |  198 ++
 .../version-1.2/ecosystem/mysql-to-doris.md        |  108 +
 .../ecosystem/plugin-development-manual.md         |  312 +++
 .../version-1.2/ecosystem/seatunnel.md             |  325 +++
 .../version-1.2/ecosystem/spark-doris-connector.md |  330 +++
 .../remote-user-defined-aggregation-function.md    |  216 ++
 .../version-1.2/ecosystem/udf/contribute-udf.md    |  124 +
 .../ecosystem/udf/java-user-defined-function.md    |  209 ++
 .../ecosystem/udf/native-user-defined-function.md  |  278 ++
 .../ecosystem/udf/remote-user-defined-function.md  |  110 +
 .../version-1.2/faq/data-faq.md                    |  169 ++
 .../version-1.2/faq/install-faq.md                 |  316 +++
 .../version-1.2/faq/sql-faq.md                     |   86 +
 .../version-1.2/get-starting/get-starting.md       |  437 ++++
 .../construct-docker/construct-docker-image.md     |  303 +++
 .../install/construct-docker/run-docker-cluster.md |  215 ++
 .../version-1.2/install/k8s-deploy.md              |   89 +
 .../install/source-install/compilation-arm.md      |  595 +++++
 .../install/source-install/compilation-general.md  |  248 ++
 .../install/source-install/compilation-mac.md      |  112 +
 .../install/source-install/compilation-win.md      |   94 +
 .../compilation-with-ldb-toolchain.md              |  138 +
 .../version-1.2/install/standard-deployment.md     |  380 +++
 .../version-1.2/lakehouse/external-table/es.md     |  595 +++++
 .../version-1.2/lakehouse/external-table/hive.md   |  209 ++
 .../version-1.2/lakehouse/external-table/jdbc.md   |  405 +++
 .../version-1.2/lakehouse/external-table/odbc.md   |  406 +++
 .../version-1.2/lakehouse/file.md                  |  204 ++
 .../version-1.2/lakehouse/filecache.md             |   92 +
 .../version-1.2/lakehouse/multi-catalog/dlf.md     |  118 +
 .../version-1.2/lakehouse/multi-catalog/es.md      |  500 ++++
 .../version-1.2/lakehouse/multi-catalog/faq.md     |  112 +
 .../version-1.2/lakehouse/multi-catalog/hive.md    |  316 +++
 .../version-1.2/lakehouse/multi-catalog/hudi.md    |   54 +
 .../version-1.2/lakehouse/multi-catalog/iceberg.md |  152 ++
 .../version-1.2/lakehouse/multi-catalog/jdbc.md    |  579 +++++
 .../lakehouse/multi-catalog/multi-catalog.md       |  398 +++
 .../hight-concurrent-point-query.md                |  103 +
 .../join-optimization/bucket-shuffle-join.md       |    0
 .../join-optimization/colocation-join.md           |  430 ++++
 .../join-optimization/doris-join-optimization.md   |  226 ++
 .../join-optimization/runtime-filter.md            |  288 +++
 .../query-acceleration/materialized-view.md        |  539 ++++
 .../version-1.2/query-acceleration/nereids.md      |   87 +
 .../pipeline-execution-engine.md                   |   78 +
 .../version-1.2/releasenotes/release-1.1.0.md      |  393 +++
 .../releasenotes/release-1.1.1.md                  |    0
 .../releasenotes/release-1.1.2.md                  |    0
 .../releasenotes/release-1.1.3.md                  |    0
 .../releasenotes/release-1.1.4.md                  |    0
 .../version-1.2/releasenotes/release-1.1.5.md      |   68 +
 .../version-1.2/releasenotes/release-1.2.0.md      |  621 +++++
 .../version-1.2/releasenotes/release-1.2.1.md      |  193 ++
 .../version-1.2/releasenotes/release-1.2.2.md      |  260 ++
 .../version-1.2/releasenotes/release-1.2.3.md      |  111 +
 .../version-1.2/releasenotes/release-1.2.4.1.md    |  177 ++
 .../releasenotes/release-2.0.0Alpha1.md            |  135 +
 .../sql-functions/aggregate-functions/any_value.md |   56 +
 .../aggregate-functions/approx_count_distinct.md   |    0
 .../sql-functions/aggregate-functions/avg.md       |    0
 .../aggregate-functions/avg_weighted.md            |   50 +
 .../aggregate-functions/bitmap_union.md            |  148 ++
 .../aggregate-functions/collect_list.md            |   81 +
 .../aggregate-functions/collect_set.md             |   87 +
 .../sql-functions/aggregate-functions/count.md     |    0
 .../aggregate-functions/group_bit_and.md           |   60 +
 .../aggregate-functions/group_bit_or.md            |   60 +
 .../aggregate-functions/group_bit_xor.md           |   60 +
 .../aggregate-functions/group_bitmap_xor.md        |   57 +
 .../aggregate-functions/group_concat.md            |   94 +
 .../sql-functions/aggregate-functions/grouping.md  |  107 +
 .../aggregate-functions/grouping_id.md             |  241 ++
 .../sql-functions/aggregate-functions/histogram.md |  110 +
 .../aggregate-functions/hll_union_agg.md           |    0
 .../sql-functions/aggregate-functions/max.md       |    0
 .../sql-functions/aggregate-functions/max_by.md    |    0
 .../sql-functions/aggregate-functions/min.md       |    0
 .../sql-functions/aggregate-functions/min_by.md    |    0
 .../aggregate-functions/percentile.md              |   57 +
 .../aggregate-functions/percentile_approx.md       |    0
 .../aggregate-functions/percentile_array.md        |   52 +
 .../sql-functions/aggregate-functions/retention.md |  143 ++
 .../aggregate-functions/sequence_count.md          |  254 ++
 .../aggregate-functions/sequence_match.md          |  256 ++
 .../sql-functions/aggregate-functions/stddev.md    |    0
 .../aggregate-functions/stddev_samp.md             |    0
 .../sql-functions/aggregate-functions/sum.md       |    0
 .../sql-functions/aggregate-functions/topn.md      |    0
 .../aggregate-functions/topn_array.md              |   60 +
 .../aggregate-functions/topn_weighted.md           |   60 +
 .../sql-functions/aggregate-functions/var_samp.md  |    0
 .../sql-functions/aggregate-functions/variance.md  |    0
 .../sql-functions/array-functions/array.md         |   88 +
 .../sql-functions/array-functions/array_apply.md   |   80 +
 .../sql-functions/array-functions/array_avg.md     |   66 +
 .../sql-functions/array-functions/array_compact.md |   85 +
 .../sql-functions/array-functions/array_concat.md  |   76 +
 .../array-functions/array_contains.md              |   79 +
 .../sql-functions/array-functions/array_cum_sum.md |   69 +
 .../array-functions/array_difference.md            |   70 +
 .../array-functions/array_distinct.md              |   82 +
 .../array-functions/array_enumerate.md             |   64 +
 .../array-functions/array_enumerate_uniq.md        |   63 +
 .../sql-functions/array-functions/array_except.md  |   93 +
 .../sql-functions/array-functions/array_exists.md  |  119 +
 .../sql-functions/array-functions/array_filter.md  |  108 +
 .../array-functions/array_first_index.md           |   87 +
 .../array-functions/array_intersect.md             |   93 +
 .../sql-functions/array-functions/array_join.md    |  108 +
 .../sql-functions/array-functions/array_map.md     |  172 ++
 .../sql-functions/array-functions/array_max.md     |   65 +
 .../sql-functions/array-functions/array_min.md     |   65 +
 .../sql-functions/array-functions/array_popback.md |   60 +
 .../array-functions/array_popfront.md              |   59 +
 .../array-functions/array_position.md              |   79 +
 .../sql-functions/array-functions/array_product.md |   66 +
 .../array-functions/array_pushfront.md             |   83 +
 .../sql-functions/array-functions/array_range.md   |   80 +
 .../sql-functions/array-functions/array_remove.md  |  101 +
 .../array-functions/array_reverse_sort.md          |   82 +
 .../sql-functions/array-functions/array_shuffle.md |   85 +
 .../sql-functions/array-functions/array_size.md    |   86 +
 .../sql-functions/array-functions/array_slice.md   |  161 ++
 .../sql-functions/array-functions/array_sort.md    |   82 +
 .../sql-functions/array-functions/array_sortby.md  |   95 +
 .../sql-functions/array-functions/array_sum.md     |   69 +
 .../sql-functions/array-functions/array_union.md   |   93 +
 .../array-functions/array_with_constant.md         |   89 +
 .../sql-functions/array-functions/array_zip.md     |   63 +
 .../array-functions/arrays_overlap.md              |   72 +
 .../sql-functions/array-functions/countequal.md    |   86 +
 .../sql-functions/array-functions/element_at.md    |   86 +
 .../sql-functions/bitmap-functions/bitmap_and.md   |    0
 .../bitmap-functions/bitmap_and_count.md           |    0
 .../bitmap-functions/bitmap_and_not.md             |    0
 .../bitmap-functions/bitmap_and_not_count.md       |    0
 .../bitmap-functions/bitmap_contains.md            |   55 +
 .../sql-functions/bitmap-functions/bitmap_count.md |    0
 .../sql-functions/bitmap-functions/bitmap_empty.md |    0
 .../bitmap-functions/bitmap_from_array.md          |   53 +
 .../bitmap-functions/bitmap_from_string.md         |   70 +
 .../bitmap-functions/bitmap_has_all.md             |   56 +
 .../bitmap-functions/bitmap_has_any.md             |   55 +
 .../sql-functions/bitmap-functions/bitmap_hash.md  |  112 +
 .../bitmap-functions/bitmap_hash64.md              |   52 +
 .../bitmap-functions/bitmap_intersect.md           |    0
 .../sql-functions/bitmap-functions/bitmap_max.md   |    0
 .../sql-functions/bitmap-functions/bitmap_min.md   |    0
 .../sql-functions/bitmap-functions/bitmap_not.md   |    0
 .../sql-functions/bitmap-functions/bitmap_or.md    |    0
 .../bitmap-functions/bitmap_or_count.md            |    0
 .../bitmap-functions/bitmap_subset_in_range.md     |    0
 .../bitmap-functions/bitmap_subset_limit.md        |    0
 .../bitmap-functions/bitmap_to_array.md            |   70 +
 .../bitmap-functions/bitmap_to_string.md           |    0
 .../sql-functions/bitmap-functions/bitmap_union.md |    0
 .../sql-functions/bitmap-functions/bitmap_xor.md   |    0
 .../bitmap-functions/bitmap_xor_count.md           |    0
 .../bitmap-functions/intersect_count.md            |    0
 .../orthogonal_bitmap_expr_calculate.md            |   47 +
 .../orthogonal_bitmap_expr_calculate_count.md      |   47 +
 .../orthogonal_bitmap_intersect.md                 |    0
 .../orthogonal_bitmap_intersect_count.md           |    0
 .../orthogonal_bitmap_union_count.md               |    0
 .../sql-functions/bitmap-functions/sub_bitmap.md   |    0
 .../sql-functions/bitmap-functions/to_bitmap.md    |    0
 .../sql-functions/bitwise-functions/bitand.md      |    0
 .../sql-functions/bitwise-functions/bitnot.md      |    0
 .../sql-functions/bitwise-functions/bitor.md       |    0
 .../sql-functions/bitwise-functions/bitxor.md      |    0
 .../version-1.2/sql-manual/sql-functions/cast.md   |   70 +
 .../sql-functions/conditional-functions/case.md    |    0
 .../conditional-functions/coalesce.md              |    0
 .../sql-functions/conditional-functions/if.md      |    0
 .../sql-functions/conditional-functions/ifnull.md  |    0
 .../sql-functions/conditional-functions/nullif.md  |    0
 .../sql-functions/conditional-functions/nvl.md     |   61 +
 .../date-time-functions/convert_tz.md              |    0
 .../sql-functions/date-time-functions/curdate.md   |    0
 .../date-time-functions/current_timestamp.md       |   70 +
 .../sql-functions/date-time-functions/curtime.md   |    0
 .../sql-functions/date-time-functions/date_add.md  |   55 +
 .../date-time-functions/date_format.md             |    0
 .../sql-functions/date-time-functions/date_sub.md  |   55 +
 .../date-time-functions/date_trunc.md              |  109 +
 .../sql-functions/date-time-functions/datediff.md  |   58 +
 .../sql-functions/date-time-functions/day.md       |   49 +
 .../sql-functions/date-time-functions/dayname.md   |    0
 .../date-time-functions/dayofmonth.md              |    0
 .../sql-functions/date-time-functions/dayofweek.md |    0
 .../sql-functions/date-time-functions/dayofyear.md |    0
 .../sql-functions/date-time-functions/days_add.md  |    0
 .../sql-functions/date-time-functions/days_diff.md |   55 +
 .../sql-functions/date-time-functions/days_sub.md  |    0
 .../sql-functions/date-time-functions/extract.md   |    0
 .../sql-functions/date-time-functions/from_days.md |    0
 .../date-time-functions/from_unixtime.md           |    0
 .../sql-functions/date-time-functions/hour.md      |   49 +
 .../sql-functions/date-time-functions/hours_add.md |    0
 .../date-time-functions/hours_diff.md              |    0
 .../sql-functions/date-time-functions/hours_sub.md |    0
 .../sql-functions/date-time-functions/last_day.md  |   49 +
 .../sql-functions/date-time-functions/localtime.md |    0
 .../sql-functions/date-time-functions/makedate.md  |   47 +
 .../date-time-functions/microseconds_add.md        |   48 +
 .../date-time-functions/microseconds_sub.md        |   50 +
 .../sql-functions/date-time-functions/minute.md    |   49 +
 .../date-time-functions/minutes_add.md             |    0
 .../date-time-functions/minutes_diff.md            |    0
 .../date-time-functions/minutes_sub.md             |    0
 .../sql-functions/date-time-functions/month.md     |    0
 .../sql-functions/date-time-functions/monthname.md |    0
 .../date-time-functions/months_add.md              |    0
 .../date-time-functions/months_diff.md             |    0
 .../date-time-functions/months_sub.md              |    0
 .../sql-functions/date-time-functions/now.md       |   70 +
 .../sql-functions/date-time-functions/quarter.md   |    0
 .../sql-functions/date-time-functions/second.md    |   49 +
 .../date-time-functions/seconds_add.md             |    0
 .../date-time-functions/seconds_diff.md            |    0
 .../date-time-functions/seconds_sub.md             |    0
 .../date-time-functions/str_to_date.md             |   72 +
 .../date-time-functions/time_round.md              |   85 +
 .../date-time-functions/time_to_sec.md             |   48 +
 .../sql-functions/date-time-functions/timediff.md  |    0
 .../date-time-functions/timestampadd.md            |   59 +
 .../date-time-functions/timestampdiff.md           |   67 +
 .../sql-functions/date-time-functions/to_date.md   |    0
 .../sql-functions/date-time-functions/to_days.md   |    0
 .../sql-functions/date-time-functions/to_monday.md |   45 +
 .../date-time-functions/unix_timestamp.md          |   86 +
 .../date-time-functions/utc_timestamp.md           |   53 +
 .../sql-functions/date-time-functions/week.md      |   67 +
 .../sql-functions/date-time-functions/weekday.md   |   68 +
 .../date-time-functions/weekofyear.md              |    0
 .../sql-functions/date-time-functions/weeks_add.md |    0
 .../date-time-functions/weeks_diff.md              |    0
 .../sql-functions/date-time-functions/weeks_sub.md |    0
 .../sql-functions/date-time-functions/year.md      |    0
 .../sql-functions/date-time-functions/years_add.md |    0
 .../date-time-functions/years_diff.md              |    0
 .../sql-functions/date-time-functions/years_sub.md |    0
 .../sql-functions/date-time-functions/yearweek.md  |   80 +
 .../sql-manual/sql-functions/digital-masking.md    |    0
 .../sql-functions/encrypt-digest-functions/aes.md  |  168 ++
 .../sql-functions/encrypt-digest-functions/md5.md  |    0
 .../encrypt-digest-functions/md5sum.md             |    0
 .../sql-functions/encrypt-digest-functions/sm3.md  |    0
 .../encrypt-digest-functions/sm3sum.md             |    0
 .../sql-functions/encrypt-digest-functions/sm4.md  |    0
 .../hash-functions/murmur_hash3_32.md              |    0
 .../hash-functions/murmur_hash3_64.md              |   61 +
 .../sql-functions/hll-functions/hll_cardinality.md |   45 +
 .../sql-functions/hll-functions/hll_empty.md       |   45 +
 .../sql-functions/hll-functions/hll_hash.md        |   45 +
 .../json-functions/get_json_bigint.md              |   76 +
 .../json-functions/get_json_double.md              |   76 +
 .../sql-functions/json-functions/get_json_int.md   |   76 +
 .../json-functions/get_json_string.md              |   86 +
 .../sql-functions/json-functions/json_array.md     |   70 +
 .../sql-functions/json-functions/json_extract.md   |   74 +
 .../sql-functions/json-functions/json_object.md    |   70 +
 .../sql-functions/json-functions/json_quote.md     |   70 +
 .../sql-functions/json-functions/json_unquote.md   |   83 +
 .../sql-functions/json-functions/json_valid.md     |   75 +
 .../json-functions/jsonb_exists_path.md            |   46 +
 .../sql-functions/json-functions/jsonb_extract.md  |   67 +
 .../sql-functions/json-functions/jsonb_parse.md    |   83 +
 .../sql-functions/json-functions/jsonb_type.md     |   55 +
 .../sql-manual/sql-functions/math-functions/abs.md |   67 +
 .../sql-functions/math-functions/acos.md           |    0
 .../sql-functions/math-functions/asin.md           |    0
 .../sql-functions/math-functions/atan.md           |    0
 .../sql-manual/sql-functions/math-functions/bin.md |    0
 .../sql-functions/math-functions/cbrt.md           |    0
 .../sql-functions/math-functions/ceil.md           |    0
 .../sql-functions/math-functions/conv.md           |   62 +
 .../sql-manual/sql-functions/math-functions/cos.md |    0
 .../sql-functions/math-functions/degrees.md        |    0
 .../sql-manual/sql-functions/math-functions/e.md   |    0
 .../sql-manual/sql-functions/math-functions/exp.md |    0
 .../sql-functions/math-functions/floor.md          |    0
 .../sql-functions/math-functions/greatest.md       |    0
 .../sql-functions/math-functions/least.md          |    0
 .../sql-manual/sql-functions/math-functions/ln.md  |    0
 .../sql-manual/sql-functions/math-functions/log.md |    0
 .../sql-functions/math-functions/log10.md          |    0
 .../sql-functions/math-functions/log2.md           |    0
 .../sql-manual/sql-functions/math-functions/mod.md |   55 +
 .../sql-functions/math-functions/negative.md       |   55 +
 .../sql-manual/sql-functions/math-functions/pi.md  |    0
 .../sql-functions/math-functions/pmod.md           |   55 +
 .../sql-functions/math-functions/positive.md       |   55 +
 .../sql-manual/sql-functions/math-functions/pow.md |    0
 .../sql-functions/math-functions/radians.md        |    0
 .../sql-functions/math-functions/random.md         |   45 +
 .../sql-functions/math-functions/round.md          |   75 +
 .../sql-functions/math-functions/round_bankers.md  |   79 +
 .../math-functions/running_difference.md           |  185 ++
 .../sql-functions/math-functions/sign.md           |    0
 .../sql-manual/sql-functions/math-functions/sin.md |    0
 .../sql-functions/math-functions/sqrt.md           |   57 +
 .../sql-manual/sql-functions/math-functions/tan.md |    0
 .../sql-functions/math-functions/truncate.md       |    0
 .../sql-functions/spatial-functions/st_angle.md    |   89 +
 .../spatial-functions/st_angle_sphere.md           |   61 +
 .../sql-functions/spatial-functions/st_area.md     |   80 +
 .../sql-functions/spatial-functions/st_asbinary.md |   68 +
 .../sql-functions/spatial-functions/st_astext.md   |    0
 .../sql-functions/spatial-functions/st_azimuth.md  |   87 +
 .../sql-functions/spatial-functions/st_circle.md   |    0
 .../sql-functions/spatial-functions/st_contains.md |    0
 .../spatial-functions/st_distance_sphere.md        |    0
 .../spatial-functions/st_geometryfromtext.md       |    0
 .../spatial-functions/st_geometryfromwkb.md        |   82 +
 .../spatial-functions/st_linefromtext.md           |    0
 .../sql-functions/spatial-functions/st_point.md    |    0
 .../sql-functions/spatial-functions/st_polygon.md  |    0
 .../sql-functions/spatial-functions/st_x.md        |    0
 .../sql-functions/spatial-functions/st_y.md        |    0
 .../append_trailing_char_if_absent.md              |    0
 .../sql-functions/string-functions/ascii.md        |    0
 .../sql-functions/string-functions/bit_length.md   |    0
 .../sql-functions/string-functions/char.md         |   69 +
 .../sql-functions/string-functions/char_length.md  |    0
 .../sql-functions/string-functions/concat.md       |    0
 .../sql-functions/string-functions/concat_ws.md    |   87 +
 .../sql-functions/string-functions/convert_to.md   |   73 +
 .../sql-functions/string-functions/elt.md          |   62 +
 .../sql-functions/string-functions/ends_with.md    |   53 +
 .../sql-functions/string-functions/esquery.md      |   74 +
 .../string-functions/extract_url_parameter.md      |   52 +
 .../sql-functions/string-functions/field.md        |   72 +
 .../sql-functions/string-functions/find_in_set.md  |    0
 .../sql-functions/string-functions/from_base64.md  |   54 +
 .../sql-functions/string-functions/hex.md          |    0
 .../sql-functions/string-functions/initcap.md      |   46 +
 .../sql-functions/string-functions/instr.md        |    0
 .../sql-functions/string-functions/lcase.md        |   37 +
 .../sql-functions/string-functions/left.md         |   47 +
 .../sql-functions/string-functions/length.md       |    0
 .../sql-functions/string-functions/like/like.md    |    0
 .../string-functions/like/not_like.md              |    0
 .../sql-functions/string-functions/locate.md       |    0
 .../sql-functions/string-functions/lower.md        |   47 +
 .../sql-functions/string-functions/lpad.md         |    0
 .../sql-functions/string-functions/ltrim.md        |   54 +
 .../sql-functions/string-functions/mask/mask.md    |   67 +
 .../string-functions/mask/mask_first_n.md          |   58 +
 .../string-functions/mask/mask_last_n.md           |   58 +
 .../sql-functions/string-functions/money_format.md |    0
 .../string-functions/not_null_or_empty.md          |   60 +
 .../string-functions/null_or_empty.md              |    0
 .../sql-functions/string-functions/parse_url.md    |   48 +
 .../string-functions/regexp/not_regexp.md          |    0
 .../string-functions/regexp/regexp.md              |    0
 .../string-functions/regexp/regexp_extract.md      |    0
 .../string-functions/regexp/regexp_extract_all.md  |   59 +
 .../string-functions/regexp/regexp_replace.md      |    0
 .../string-functions/regexp/regexp_replace_one.md  |   54 +
 .../sql-functions/string-functions/repeat.md       |    0
 .../sql-functions/string-functions/replace.md      |    0
 .../sql-functions/string-functions/reverse.md      |   88 +
 .../sql-functions/string-functions/right.md        |   47 +
 .../sql-functions/string-functions/rpad.md         |    0
 .../sql-functions/string-functions/rtrim.md        |   54 +
 .../string-functions/search/multi_match_any.md     |   54 +
 .../search/multi_search_all_positions.md           |   54 +
 .../sql-functions/string-functions/sleep.md        |   48 +
 .../sql-functions/string-functions/space.md        |   55 +
 .../string-functions/split_by_string.md            |  113 +
 .../sql-functions/string-functions/split_part.md   |   98 +
 .../sql-functions/string-functions/starts_with.md  |   53 +
 .../sql-functions/string-functions/strleft.md      |   47 +
 .../sql-functions/string-functions/strright.md     |   47 +
 .../sql-functions/string-functions/sub_replace.md  |   52 +
 .../sql-functions/string-functions/substr.md       |   50 +
 .../sql-functions/string-functions/substring.md    |   79 +
 .../string-functions/substring_index.md            |   91 +
 .../sql-functions/string-functions/to_base64.md    |   54 +
 .../sql-functions/string-functions/trim.md         |   54 +
 .../sql-functions/string-functions/ucase.md        |   37 +
 .../sql-functions/string-functions/unhex.md        |    0
 .../sql-functions/string-functions/upper.md        |   47 +
 .../sql-functions/string-functions/uuid.md         |   56 +
 .../sql-functions/table-functions/backends.md      |  119 +
 .../table-functions/explode-bitmap.md              |  145 ++
 .../table-functions/explode-json-array.md          |  183 ++
 .../table-functions/explode-numbers.md             |   54 +
 .../sql-functions/table-functions/explode-split.md |  105 +
 .../sql-functions/table-functions/explode.md       |   86 +
 .../sql-functions/table-functions/hdfs.md          |  121 +
 .../sql-functions/table-functions/iceberg_meta.md  |  101 +
 .../sql-functions/table-functions/numbers.md       |   70 +
 .../table-functions/outer-combinator.md            |   50 +
 .../table-functions/resource-group.md              |   72 +
 .../sql-manual/sql-functions/table-functions/s3.md |  484 ++++
 .../sql-manual/sql-functions/width-bucket.md       |  151 ++
 .../window-functions/WINDOW-FUNCTION-AVG.md        |    0
 .../window-functions/WINDOW-FUNCTION-COUNT.md      |    0
 .../window-functions/WINDOW-FUNCTION-DENSE-RANK.md |    0
 .../WINDOW-FUNCTION-FIRST-VALUE.md                 |    0
 .../window-functions/WINDOW-FUNCTION-LAG.md        |    0
 .../window-functions/WINDOW-FUNCTION-LAST-VALUE.md |    0
 .../window-functions/WINDOW-FUNCTION-LEAD.md       |   51 +
 .../window-functions/WINDOW-FUNCTION-MAX.md        |    0
 .../window-functions/WINDOW-FUNCTION-MIN.md        |    0
 .../window-functions/WINDOW-FUNCTION-NTILE.md      |    0
 .../window-functions/WINDOW-FUNCTION-RANK.md       |    0
 .../window-functions/WINDOW-FUNCTION-ROW-NUMBER.md |    0
 .../window-functions/WINDOW-FUNCTION-SUM.md        |    0
 .../WINDOW-FUNCTION-WINDOW-FUNNEL.md               |   62 +
 .../window-functions/WINDOW-FUNCTION.md            |    0
 .../Account-Management-Statements/ALTER-USER.md    |  100 +
 .../Account-Management-Statements/CREATE-ROLE.md   |    0
 .../Account-Management-Statements/CREATE-USER.md   |  132 +
 .../Account-Management-Statements/DROP-ROLE.md     |   56 +
 .../Account-Management-Statements/DROP-USER.md     |    0
 .../Account-Management-Statements/GRANT.md         |  148 ++
 .../Account-Management-Statements/LDAP.md          |   54 +
 .../Account-Management-Statements/REVOKE.md        |   85 +
 .../Account-Management-Statements/SET-PASSWORD.md  |    0
 .../Account-Management-Statements/SET-PROPERTY.md  |  172 ++
 .../ALTER-SYSTEM-ADD-BACKEND.md                    |    0
 .../ALTER-SYSTEM-ADD-BROKER.md                     |    0
 .../ALTER-SYSTEM-ADD-FOLLOWER.md                   |   61 +
 .../ALTER-SYSTEM-ADD-OBSERVER.md                   |   61 +
 .../ALTER-SYSTEM-DECOMMISSION-BACKEND.md           |   63 +
 .../ALTER-SYSTEM-DROP-BACKEND.md                   |    0
 .../ALTER-SYSTEM-DROP-BROKER.md                    |    0
 .../ALTER-SYSTEM-DROP-FOLLOWER.md                  |   61 +
 .../ALTER-SYSTEM-DROP-OBSERVER.md                  |   61 +
 .../ALTER-SYSTEM-MODIFY-BACKEND.md                 |    0
 .../ALTER-SYSTEM-MODIFY-BROKER.md                  |    0
 .../CANCEL-ALTER-SYSTEM.md                         |    0
 .../Alter/ALTER-CATALOG.md                         |   81 +
 .../Alter/ALTER-DATABASE.md                        |    0
 .../Alter/ALTER-RESOURCE.md                        |   75 +
 .../Alter/ALTER-SQL-BLOCK-RULE.md                  |    0
 .../Alter/ALTER-STORAGE-POLICY.md                  |   60 +
 .../Alter/ALTER-TABLE-BITMAP.md                    |    0
 .../Alter/ALTER-TABLE-COLUMN.md                    |  233 ++
 .../Alter/ALTER-TABLE-COMMENT.md                   |    0
 .../Alter/ALTER-TABLE-PARTITION.md                 |  168 ++
 .../Alter/ALTER-TABLE-PROPERTY.md                  |  290 +++
 .../Alter/ALTER-TABLE-RENAME.md                    |  120 +
 .../Alter/ALTER-TABLE-REPLACE.md                   |    0
 .../Alter/ALTER-TABLE-ROLLUP.md                    |  139 +
 .../Data-Definition-Statements/Alter/ALTER-VIEW.md |    0
 .../Alter/CANCEL-ALTER-TABLE.md                    |    0
 .../Backup-and-Restore/BACKUP.md                   |  109 +
 .../Backup-and-Restore/CANCEL-BACKUP.md            |    0
 .../Backup-and-Restore/CANCEL-RESTORE.md           |    0
 .../Backup-and-Restore/CREATE-REPOSITORY.md        |  181 ++
 .../Backup-and-Restore/DROP-REPOSITORY.md          |    0
 .../Backup-and-Restore/RESTORE.md                  |  121 +
 .../Create/CREATE-CATALOG.md                       |  342 +++
 .../Create/CREATE-DATABASE.md                      |    0
 .../Create/CREATE-ENCRYPT-KEY.md                   |    0
 .../Create/CREATE-EXTERNAL-TABLE.md                |    0
 .../Create/CREATE-FILE.md                          |    0
 .../Create/CREATE-FUNCTION.md                      |  172 ++
 .../Create/CREATE-INDEX.md                         |    0
 .../Create/CREATE-MATERIALIZED-VIEW.md             |  236 ++
 .../Create/CREATE-POLICY.md                        |  129 +
 .../Create/CREATE-RESOURCE.md                      |  249 ++
 .../Create/CREATE-SQL-BLOCK-RULE.md                |    0
 .../Create/CREATE-TABLE-AS-SELECT.md               |   89 +
 .../Create/CREATE-TABLE-LIKE.md                    |    0
 .../Create/CREATE-TABLE.md                         |  700 +++++
 .../Create/CREATE-VIEW.md                          |    0
 .../Drop/DROP-CATALOG.md                           |   60 +
 .../Drop/DROP-DATABASE.md                          |   61 +
 .../Drop/DROP-ENCRYPT-KEY.md                       |    0
 .../Data-Definition-Statements/Drop/DROP-FILE.md   |    0
 .../Drop/DROP-FUNCTION.md                          |   67 +
 .../Data-Definition-Statements/Drop/DROP-INDEX.md  |    0
 .../Drop/DROP-MATERIALIZED-VIEW.md                 |    0
 .../Data-Definition-Statements/Drop/DROP-POLICY.md |   75 +
 .../Drop/DROP-RESOURCE.md                          |    0
 .../Drop/DROP-SQL-BLOCK-RULE.md                    |    0
 .../Data-Definition-Statements/Drop/DROP-TABLE.md  |    0
 .../Drop/TRUNCATE-TABLE.md                         |    0
 .../Load/ALTER-ROUTINE-LOAD.md                     |    0
 .../Load/BROKER-LOAD.md                            |  541 ++++
 .../Load/CANCEL-LOAD.md                            |   82 +
 .../Load/CLEAN-LABEL.md                            |   66 +
 .../Load/CLEAN-PROFILE.md                          |   60 +
 .../Load/CREATE-ROUTINE-LOAD.md                    |  568 ++++
 .../Load/CREATE-SYNC-JOB.md                        |  161 ++
 .../Load/MULTI-LOAD.md                             |    0
 .../Load/MYSQL-LOAD.md                             |  170 ++
 .../Load/PAUSE-ROUTINE-LOAD.md                     |    0
 .../Load/PAUSE-SYNC-JOB.md                         |    0
 .../Load/RESUME-ROUTINE-LOAD.md                    |    0
 .../Load/RESUME-SYNC-JOB.md                        |    0
 .../Load/STOP-ROUTINE-LOAD.md                      |    0
 .../Load/STOP-SYNC-JOB.md                          |    0
 .../Load/STREAM-LOAD.md                            |  455 ++++
 .../Manipulation/CANCEL-EXPORT.md                  |   79 +
 .../Manipulation/DELETE.md                         |  182 ++
 .../Manipulation/EXPORT.md                         |  237 ++
 .../Manipulation/INSERT.md                         |  234 ++
 .../Manipulation/SELECT.md                         |  415 +++
 .../Manipulation/UPDATE.md                         |  165 ++
 .../Data-Manipulation-Statements/OUTFILE.md        |  334 +++
 .../sql-manual/sql-reference/Data-Types/ARRAY.md   |   92 +
 .../sql-manual/sql-reference/Data-Types/BIGINT.md  |    0
 .../sql-manual/sql-reference/Data-Types/BITMAP.md  |   72 +
 .../sql-manual/sql-reference/Data-Types/BOOLEAN.md |    0
 .../sql-manual/sql-reference/Data-Types/CHAR.md    |   34 +
 .../sql-manual/sql-reference/Data-Types/DATE.md    |   46 +
 .../sql-reference/Data-Types/DATETIME.md           |   38 +
 .../sql-reference/Data-Types/DATETIMEV2.md         |   48 +
 .../sql-manual/sql-reference/Data-Types/DATEV2.md  |   50 +
 .../sql-manual/sql-reference/Data-Types/DECIMAL.md |   40 +
 .../sql-reference/Data-Types/DECIMALV3.md          |   86 +
 .../sql-manual/sql-reference/Data-Types/DOUBLE.md  |    0
 .../sql-manual/sql-reference/Data-Types/FLOAT.md   |    0
 .../sql-manual/sql-reference/Data-Types/HLL.md     |    0
 .../sql-manual/sql-reference/Data-Types/INT.md     |    0
 .../sql-manual/sql-reference/Data-Types/JSONB.md   |  813 ++++++
 .../sql-reference/Data-Types/LARGEINT.md           |    0
 .../sql-reference/Data-Types/QUANTILE_STATE.md     |   68 +
 .../sql-reference/Data-Types/SMALLINT.md           |    0
 .../sql-manual/sql-reference/Data-Types/STRING.md  |   36 +
 .../sql-manual/sql-reference/Data-Types/TINYINT.md |    0
 .../sql-manual/sql-reference/Data-Types/VARCHAR.md |    0
 .../ADMIN-CANCEL-REBALANCE-DISK.md                 |   62 +
 .../ADMIN-CANCEL-REPAIR.md                         |    0
 .../ADMIN-CHECK-TABLET.md                          |   64 +
 .../ADMIN-CLEAN-TRASH.md                           |    0
 .../ADMIN-COPY-TABLET.md                           |    0
 .../ADMIN-DIAGNOSE-TABLET.md                       |    0
 .../ADMIN-REBALANCE-DISK.md                        |   70 +
 .../ADMIN-REPAIR-TABLE.md                          |    0
 .../ADMIN-SET-CONFIG.md                            |    0
 .../ADMIN-SET-REPLICA-STATUS.md                    |    0
 .../ADMIN-SHOW-CONFIG.md                           |   77 +
 .../ADMIN-SHOW-REPLICA-DISTRIBUTION.md             |    0
 .../ADMIN-SHOW-REPLICA-STATUS.md                   |    0
 .../ADMIN-SHOW-TABLET-STORAGE-FORMAT.md            |    0
 .../ENABLE-FEATURE.md                              |    0
 .../INSTALL-PLUGIN.md                              |   82 +
 .../Database-Administration-Statements/KILL.md     |    0
 .../Database-Administration-Statements/RECOVER.md  |  163 ++
 .../SET-VARIABLE.md                                |   91 +
 .../UNINSTALL-PLUGIN.md                            |    0
 .../sql-manual/sql-reference/Operators/in.md       |   85 +
 .../SHOW-ALTER-TABLE-MATERIALIZED-VIEW.md          |  120 +
 .../sql-reference/Show-Statements/SHOW-ALTER.md    |   80 +
 .../sql-reference/Show-Statements/SHOW-BACKENDS.md |   65 +
 .../sql-reference/Show-Statements/SHOW-BACKUP.md   |    0
 .../sql-reference/Show-Statements/SHOW-BROKER.md   |    0
 .../Show-Statements/SHOW-CATALOG-RECYCLE-BIN.md    |   79 +
 .../sql-reference/Show-Statements/SHOW-CATALOGS.md |   88 +
 .../sql-reference/Show-Statements/SHOW-CHARSET.md  |    0
 .../Show-Statements/SHOW-COLLATION.md              |    0
 .../sql-reference/Show-Statements/SHOW-COLUMNS.md  |   56 +
 .../Show-Statements/SHOW-CREATE-CATALOG.md         |   64 +
 .../Show-Statements/SHOW-CREATE-DATABASE.md        |    0
 .../Show-Statements/SHOW-CREATE-FUNCTION.md        |   70 +
 .../Show-Statements/SHOW-CREATE-LOAD.md            |   59 +
 .../SHOW-CREATE-MATERIALIZED-VIEW.md               |    0
 .../Show-Statements/SHOW-CREATE-REPOSITORY.md      |   59 +
 .../Show-Statements/SHOW-CREATE-ROUTINE-LOAD.md    |    0
 .../Show-Statements/SHOW-CREATE-TABLE.md           |    0
 .../Show-Statements/SHOW-DATA-SKEW.md              |   56 +
 .../Show-Statements/SHOW-DATA-TYPES.md             |   52 +
 .../sql-reference/Show-Statements/SHOW-DATA.md     |    0
 .../Show-Statements/SHOW-DATABASE-ID.md            |    0
 .../Show-Statements/SHOW-DATABASES.md              |   99 +
 .../sql-reference/Show-Statements/SHOW-DELETE.md   |    0
 .../Show-Statements/SHOW-DYNAMIC-PARTITION.md      |    0
 .../Show-Statements/SHOW-ENCRYPT-KEY.md            |    0
 .../sql-reference/Show-Statements/SHOW-ENGINES.md  |    0
 .../sql-reference/Show-Statements/SHOW-EVENTS.md   |    0
 .../sql-reference/Show-Statements/SHOW-EXPORT.md   |    0
 .../sql-reference/Show-Statements/SHOW-FILE.md     |    0
 .../Show-Statements/SHOW-FRONTENDS.md              |   60 +
 .../Show-Statements/SHOW-FUNCTIONS.md              |  132 +
 .../sql-reference/Show-Statements/SHOW-GRANTS.md   |    0
 .../sql-reference/Show-Statements/SHOW-INDEX.md    |    0
 .../Show-Statements/SHOW-LAST-INSERT.md            |    0
 .../Show-Statements/SHOW-LOAD-PROFILE.md           |  230 ++
 .../Show-Statements/SHOW-LOAD-WARNINGS.md          |   66 +
 .../sql-reference/Show-Statements/SHOW-LOAD.md     |  117 +
 .../Show-Statements/SHOW-MIGRATIONS.md             |    0
 .../Show-Statements/SHOW-OPEN-TABLES.md            |    0
 .../Show-Statements/SHOW-PARTITION-ID.md           |   56 +
 .../Show-Statements/SHOW-PARTITIONS.md             |   79 +
 .../sql-reference/Show-Statements/SHOW-PLUGINS.md  |    0
 .../sql-reference/Show-Statements/SHOW-POLICY.md   |  101 +
 .../sql-reference/Show-Statements/SHOW-PROC.md     |  244 ++
 .../Show-Statements/SHOW-PROCEDURE.md              |    0
 .../Show-Statements/SHOW-PROCESSLIST.md            |   76 +
 .../sql-reference/Show-Statements/SHOW-PROPERTY.md |    0
 .../Show-Statements/SHOW-QUERY-PROFILE.md          |  221 ++
 .../Show-Statements/SHOW-REPOSITORIES.md           |    0
 .../Show-Statements/SHOW-RESOURCES.md              |    0
 .../sql-reference/Show-Statements/SHOW-RESTORE.md  |    0
 .../sql-reference/Show-Statements/SHOW-ROLES.md    |    0
 .../Show-Statements/SHOW-ROUTINE-LOAD-TASK.md      |    0
 .../Show-Statements/SHOW-ROUTINE-LOAD.md           |    0
 .../Show-Statements/SHOW-SMALL-FILES.md            |    0
 .../sql-reference/Show-Statements/SHOW-SNAPSHOT.md |    0
 .../Show-Statements/SHOW-SQL-BLOCK-RULE.md         |    0
 .../sql-reference/Show-Statements/SHOW-STATUS.md   |  114 +
 .../Show-Statements/SHOW-STREAM-LOAD.md            |  101 +
 .../sql-reference/Show-Statements/SHOW-SYNC-JOB.md |    0
 .../sql-reference/Show-Statements/SHOW-TABLE-ID.md |    0
 .../Show-Statements/SHOW-TABLE-STATUS.md           |   67 +
 .../sql-reference/Show-Statements/SHOW-TABLES.md   |   83 +
 .../sql-reference/Show-Statements/SHOW-TABLET.md   |    0
 .../sql-reference/Show-Statements/SHOW-TABLETS.md  |   81 +
 .../Show-Statements/SHOW-TRANSACTION.md            |    0
 .../sql-reference/Show-Statements/SHOW-TRASH.md    |    0
 .../sql-reference/Show-Statements/SHOW-TRIGGERS.md |    0
 .../sql-reference/Show-Statements/SHOW-TYPECAST.md |   71 +
 .../Show-Statements/SHOW-VARIABLES.md              |   76 +
 .../sql-reference/Show-Statements/SHOW-VIEW.md     |    0
 .../sql-reference/Show-Statements/SHOW-WARNING.md  |    0
 .../Show-Statements/SHOW-WHITE-LIST.md             |    0
 .../sql-reference/Utility-Statements/DESCRIBE.md   |    0
 .../sql-reference/Utility-Statements/HELP.md       |    0
 .../sql-reference/Utility-Statements/REFRESH.md    |   82 +
 .../sql-reference/Utility-Statements/SWITCH.md     |   60 +
 .../sql-reference/Utility-Statements/SYNC.md       |   56 +
 .../sql-reference/Utility-Statements/USE.md        |   66 +
 .../version-1.2/summary/basic-summary.md           |  100 +
 i18n/zh-CN/docusaurus-theme-classic/navbar.json    |    4 +
 local_build_docs.sh                                |   10 +-
 sidebars.json                                      |  969 -------
 static/images/clion-deployment1.png                |  Bin 0 -> 282126 bytes
 static/images/clion-deployment2.png                |  Bin 0 -> 291675 bytes
 static/images/clion-run-debug-conf1.png            |  Bin 0 -> 242389 bytes
 static/images/clion-run-debug-conf2.png            |  Bin 0 -> 242435 bytes
 static/images/clion-toolchains.png                 |  Bin 0 -> 313476 bytes
 static/images/coldrun.png                          |  Bin 0 -> 430070 bytes
 static/images/doris-dist-output-tree.png           |  Bin 0 -> 51151 bytes
 static/images/hotrun.png                           |  Bin 0 -> 278044 bytes
 static/images/icon/u1.png                          |  Bin 0 -> 5211 bytes
 static/images/icon/u10.png                         |  Bin 0 -> 14194 bytes
 static/images/icon/u11.png                         |  Bin 0 -> 4477 bytes
 static/images/icon/u12.png                         |  Bin 0 -> 9229 bytes
 static/images/icon/u13.png                         |  Bin 0 -> 14922 bytes
 static/images/icon/u14.png                         |  Bin 0 -> 5973 bytes
 static/images/icon/u15.png                         |  Bin 0 -> 20277 bytes
 static/images/icon/u16.png                         |  Bin 0 -> 6772 bytes
 static/images/icon/u17.png                         |  Bin 0 -> 9363 bytes
 static/images/icon/u18.png                         |  Bin 0 -> 21662 bytes
 static/images/icon/u19.png                         |  Bin 0 -> 15925 bytes
 static/images/icon/u2.png                          |  Bin 0 -> 9179 bytes
 static/images/icon/u20.png                         |  Bin 0 -> 7369 bytes
 static/images/icon/u21.png                         |  Bin 0 -> 5981 bytes
 static/images/icon/u22.png                         |  Bin 0 -> 10167 bytes
 static/images/icon/u23.png                         |  Bin 0 -> 4090 bytes
 static/images/icon/u24.png                         |  Bin 0 -> 11263 bytes
 static/images/icon/u25.png                         |  Bin 0 -> 11132 bytes
 static/images/icon/u26.png                         |  Bin 0 -> 9928 bytes
 static/images/icon/u27.png                         |  Bin 0 -> 7888 bytes
 static/images/icon/u28.png                         |  Bin 0 -> 15949 bytes
 static/images/icon/u29.png                         |  Bin 0 -> 16856 bytes
 static/images/icon/u3.png                          |  Bin 0 -> 7434 bytes
 static/images/icon/u30.png                         |  Bin 0 -> 8611 bytes
 static/images/icon/u4.png                          |  Bin 0 -> 11174 bytes
 static/images/icon/u5.png                          |  Bin 0 -> 6499 bytes
 static/images/icon/u6.png                          |  Bin 0 -> 21360 bytes
 static/images/icon/u7.png                          |  Bin 0 -> 8108 bytes
 static/images/icon/u8.png                          |  Bin 0 -> 9595 bytes
 static/images/icon/u9.png                          |  Bin 0 -> 8734 bytes
 static/images/icon/xiaomi.png                      |  Bin 0 -> 9412 bytes
 static/images/lightschemachange_compare.png        |  Bin 0 -> 121803 bytes
 static/images/mac-clion-deployment1.png            |  Bin 0 -> 129426 bytes
 static/images/mac-clion-deployment2.png            |  Bin 0 -> 187708 bytes
 static/images/mac-clion-deployment3.png            |  Bin 0 -> 258431 bytes
 static/images/mac-clion-deployment4.png            |  Bin 0 -> 25342 bytes
 static/images/mac-clion-deployment5.png            |  Bin 0 -> 171195 bytes
 static/images/mac-clion-deployment6.png            |  Bin 0 -> 175101 bytes
 static/images/mac-clion-deployment7.png            |  Bin 0 -> 408439 bytes
 static/images/mac-idea-deployment1.png             |  Bin 0 -> 183478 bytes
 static/images/mac-idea-deployment2.png             |  Bin 0 -> 370468 bytes
 static/images/mac-idea-deployment3.png             |  Bin 0 -> 17394 bytes
 static/images/mac-idea-deployment4.png             |  Bin 0 -> 151080 bytes
 static/images/mac-idea-deployment5.png             |  Bin 0 -> 142210 bytes
 static/images/mac-idea-deployment6.png             |  Bin 0 -> 236799 bytes
 static/images/mergeonwrite_ssb.png                 |  Bin 0 -> 282274 bytes
 static/images/nereids-tpch.png                     |  Bin 0 -> 204015 bytes
 static/images/pipeline-execution-engine.png        |  Bin 0 -> 65095 bytes
 .../alter-table/alter-table-bitmap-index.md        |   80 -
 .../alter-table/alter-table-replace-table.md       |   72 -
 .../alter-table/alter-table-rollup.md              |  189 --
 .../alter-table/alter-table-schema-change.md       |  231 --
 .../alter-table/alter-table-temp-partition.md      |  288 ---
 .../administrator-guide/backup-restore.md          |  186 --
 .../administrator-guide/block-rule/sql-block.md    |   59 -
 .../version-0.15/administrator-guide/broker.md     |  289 ---
 .../administrator-guide/bucket-shuffle-join.md     |  105 -
 .../administrator-guide/colocation-join.md         |  409 ---
 .../administrator-guide/config/be_config.md        | 1458 -----------
 .../administrator-guide/config/fe_config.md        | 2047 ---------------
 .../administrator-guide/config/user_property.md    |   73 -
 .../administrator-guide/dynamic-partition.md       |  459 ----
 .../administrator-guide/export-manual.md           |  198 --
 .../http-actions/cancel-label.md                   |   64 -
 .../http-actions/compaction-action.md              |  211 --
 .../http-actions/connection-action.md              |   42 -
 .../http-actions/fe-get-log-file.md                |   74 -
 .../http-actions/fe/bootstrap-action.md            |  121 -
 .../http-actions/fe/cancel-load-action.md          |   96 -
 .../http-actions/fe/check-decommission-action.md   |   84 -
 .../http-actions/fe/check-storage-type-action.md   |   84 -
 .../http-actions/fe/config-action.md               |   83 -
 .../http-actions/fe/connection-action.md           |   82 -
 .../http-actions/fe/get-ddl-stmt-action.md         |   92 -
 .../http-actions/fe/get-load-info-action.md        |   95 -
 .../http-actions/fe/get-load-state.md              |   88 -
 .../http-actions/fe/get-log-file-action.md         |  113 -
 .../http-actions/fe/get-small-file.md              |  102 -
 .../http-actions/fe/ha-action.md                   |   95 -
 .../http-actions/fe/hardware-info-action.md        |   79 -
 .../http-actions/fe/health-action.md               |   61 -
 .../http-actions/fe/log-action.md                  |   98 -
 .../http-actions/fe/logout-action.md               |   59 -
 .../http-actions/fe/manager/cluster-action.md      |   77 -
 .../http-actions/fe/manager/node-action.md         |  435 ----
 .../fe/manager/query-profile-action.md             |  308 ---
 .../http-actions/fe/meta-action.md                 |   64 -
 .../http-actions/fe/meta-info-action.md            |  232 --
 .../http-actions/fe/meta-replay-state-action.md    |   61 -
 .../http-actions/fe/profile-action.md              |   80 -
 .../http-actions/fe/query-detail-action.md         |  116 -
 .../http-actions/fe/query-profile-action.md        |  108 -
 .../http-actions/fe/row-count-action.md            |   84 -
 .../http-actions/fe/session-action.md              |   75 -
 .../http-actions/fe/set-config-action.md           |  150 --
 .../http-actions/fe/show-data-action.md            |  111 -
 .../http-actions/fe/show-meta-info-action.md       |  138 -
 .../http-actions/fe/show-proc-action.md            |  104 -
 .../http-actions/fe/show-runtime-info-action.md    |   84 -
 .../http-actions/fe/statement-execution-action.md  |  102 -
 .../http-actions/fe/system-action.md               |   93 -
 .../http-actions/fe/table-query-plan-action.md     |  113 -
 .../http-actions/fe/table-row-count-action.md      |   88 -
 .../http-actions/fe/table-schema-action.md         |  104 -
 .../http-actions/fe/upload-action.md               |  159 --
 .../http-actions/get-load-state.md                 |   59 -
 .../http-actions/get-tablets.md                    |   65 -
 .../http-actions/profile-action.md                 |  120 -
 .../http-actions/query-detail-action.md            |   61 -
 .../http-actions/restore-tablet.md                 |   41 -
 .../http-actions/show-data-action.md               |   35 -
 .../http-actions/tablet-migration-action.md        |   89 -
 .../http-actions/tablets_distribution.md           |  124 -
 .../version-0.15/administrator-guide/ldap.md       |  175 --
 .../load-data/batch-delete-manual.md               |  204 --
 .../load-data/binlog-load-manual.md                |  523 ----
 .../load-data/broker-load-manual.md                |  522 ----
 .../administrator-guide/load-data/delete-manual.md |  194 --
 .../load-data/insert-into-manual.md                |  275 --
 .../load-data/load-json-format.md                  |  467 ----
 .../administrator-guide/load-data/load-manual.md   |  228 --
 .../load-data/routine-load-manual.md               |  330 ---
 .../load-data/s3-load-manual.md                    |   93 -
 .../load-data/sequence-column-manual.md            |  208 --
 .../load-data/spark-load-manual.md                 |  580 -----
 .../load-data/stream-load-manual.md                |  352 ---
 .../administrator-guide/materialized_view.md       |  494 ----
 .../administrator-guide/multi-tenant.md            |  222 --
 .../operation/be-olap-error-code.md                |  256 --
 .../administrator-guide/operation/disk-capacity.md |  169 --
 .../operation/doris-error-code.md                  |  178 --
 .../operation/metadata-operation.md                |  395 ---
 .../administrator-guide/operation/monitor-alert.md |  304 ---
 .../operation/monitor-metrics/be-metrics.md        |   84 -
 .../operation/monitor-metrics/fe-metrics.md        |  155 --
 .../operation/tablet-meta-tool.md                  |  147 --
 .../operation/tablet-repair-and-balance.md         |  686 -----
 .../operation/tablet-restore-tool.md               |  136 -
 .../version-0.15/administrator-guide/outfile.md    |  375 ---
 .../version-0.15/administrator-guide/privilege.md  |  224 --
 .../administrator-guide/query_cache.md             |  138 -
 .../administrator-guide/resource-management.md     |  169 --
 .../administrator-guide/running-profile.md         |  272 --
 .../administrator-guide/runtime-filter.md          |  281 --
 .../administrator-guide/small-file-mgr.md          |  104 -
 .../version-0.15/administrator-guide/sql-mode.md   |   76 -
 .../version-0.15/administrator-guide/time-zone.md  |   98 -
 .../version-0.15/administrator-guide/update.md     |  126 -
 .../version-0.15/administrator-guide/variables.md  |  441 ----
 .../version-0.15/best-practices/fe-load-balance.md |  471 ----
 .../version-0.15/best-practices/samples.md         |   56 -
 .../best-practices/star-schema-benchmark.md        |  165 --
 .../version-0.15/best-practices/systemd.md         |   31 -
 .../version-0.15/extending-doris/audit-plugin.md   |   93 -
 .../version-0.15/extending-doris/datax.md          |  104 -
 .../version-0.15/extending-doris/doris-on-es.md    |  589 -----
 .../extending-doris/flink-doris-connector.md       |  283 --
 .../version-0.15/extending-doris/logstash.md       |  198 --
 .../version-0.15/extending-doris/odbc-of-doris.md  |  280 --
 .../extending-doris/plugin-development-manual.md   |  314 ---
 .../extending-doris/spark-doris-connector.md       |  203 --
 .../udf/contrib/udaf-orthogonal-bitmap-manual.md   |  249 --
 .../extending-doris/udf/contribute-udf.md          |  124 -
 .../extending-doris/udf/user-defined-function.md   |  266 --
 .../version-0.15/getting-started/advance-usage.md  |  274 --
 .../version-0.15/getting-started/basic-usage.md    |  382 ---
 .../version-0.15/getting-started/best-practice.md  |  198 --
 .../getting-started/data-model-rollup.md           |  636 -----
 .../version-0.15/getting-started/data-partition.md |  398 ---
 .../version-0.15/getting-started/hit-the-rollup.md |  298 ---
 .../version-0.15/installing/compilation-arm.md     |  232 --
 .../version-0.15/installing/compilation.md         |  214 --
 .../version-0.15/installing/install-deploy.md      |  462 ----
 versioned_docs/version-0.15/installing/upgrade.md  |   83 -
 .../internal/Flink-doris-connector-Design.md       |  250 --
 .../internal/doris_storage_optimization.md         |  235 --
 .../version-0.15/internal/grouping_sets_design.md  |  501 ----
 .../version-0.15/internal/metadata-design.md       |  127 -
 .../Account-Management-Statements/ALTER-USER.md    |   38 -
 .../Account-Management-Statements/CREATE-ROLE.md   |   38 -
 .../Account-Management-Statements/CREATE-USER.md   |   38 -
 .../Account-Management-Statements/DROP-ROLE.md     |   38 -
 .../Account-Management-Statements/DROP-USER.md     |   38 -
 .../Account-Management-Statements/GRANT.md         |   38 -
 .../Account-Management-Statements/LDAP.md          |   38 -
 .../Account-Management-Statements/REVOKE.md        |   38 -
 .../Account-Management-Statements/SET-PASSWORD.md  |   38 -
 .../Account-Management-Statements/SET-PROPERTY.md  |   38 -
 .../ALTER-SYSTEM-ADD-BACKEND.md                    |   38 -
 .../ALTER-SYSTEM-ADD-FOLLOWER.md                   |   38 -
 .../ALTER-SYSTEM-ADD-OBSERVER.md                   |   38 -
 .../ALTER-SYSTEM-DECOMMISSION-BACKEND.md           |   38 -
 .../ALTER-SYSTEM-DROP-BACKEND.md                   |   38 -
 .../ALTER-SYSTEM-DROP-FOLLOWER.md                  |   38 -
 .../ALTER-SYSTEM-DROP-OBSERVER.md                  |   38 -
 .../ALTER-SYSTEM-MODIFY-BROKER.md                  |   38 -
 .../CANCEL-ALTER-SYSTEM.md                         |   38 -
 .../Alter/ALTER-DATABASE.md                        |   38 -
 .../Alter/ALTER-TABLE-COLUMN.md                    |   38 -
 .../Alter/ALTER-TABLE-PARTITION.md                 |   38 -
 .../Alter/ALTER-TABLE-PROPERTY.md                  |   38 -
 .../Alter/ALTER-TABLE-RENAME.md                    |   38 -
 .../Alter/ALTER-TABLE-REPLACE.md                   |   38 -
 .../Alter/ALTER-TABLE-ROLLUP.md                    |   38 -
 .../Data-Definition-Statements/Alter/ALTER-VIEW.md |   38 -
 .../Alter/CANCEL-ALTER-TABLE.md                    |   38 -
 .../Backup-and-Restore/BACKUP.md                   |   38 -
 .../Backup-and-Restore/CANCEL-BACKUP.md            |   38 -
 .../Backup-and-Restore/CANCEL-RESTORE.md           |   38 -
 .../Backup-and-Restore/CREATE-REPOSITORY.md        |   38 -
 .../Backup-and-Restore/DROP-REPOSITORY.md          |   38 -
 .../Backup-and-Restore/RESTORE.md                  |   38 -
 .../Create/CREATE-DATABASE.md                      |   38 -
 .../Create/CREATE-ENCRYPT-KEY.md                   |   38 -
 .../Create/CREATE-FILE.md                          |   38 -
 .../Create/CREATE-FUNCTION.md                      |   38 -
 .../Create/CREATE-INDEX.md                         |   38 -
 .../Create/CREATE-MATERIALIZED-VIEW.md             |   38 -
 .../Create/CREATE-RESOURCE.md                      |   38 -
 .../Create/CREATE-TABLE-LIKE.md                    |   38 -
 .../Create/CREATE-TABLE.md                         |  560 ----
 .../Create/CREATE-VIEW.md                          |   38 -
 .../Drop/DROP-DATABASE.md                          |   38 -
 .../Drop/DROP-ENCRYPT-KEY.md                       |   38 -
 .../Data-Definition-Statements/Drop/DROP-FILE.md   |   38 -
 .../Drop/DROP-FUNCTION.md                          |   38 -
 .../Data-Definition-Statements/Drop/DROP-INDEX.md  |   38 -
 .../Drop/DROP-MATERIALIZED-VIEW.md                 |   38 -
 .../Drop/DROP-RESOURCE.md                          |   38 -
 .../Data-Definition-Statements/Drop/DROP-TABLE.md  |   38 -
 .../Drop/TRUNCATE-TABLE.md                         |   38 -
 .../Load/ALTER-ROUTINE-LOAD.md                     |   38 -
 .../Load/BROKER-LOAD.md                            |   38 -
 .../Load/CANCEL-LOAD.md                            |   38 -
 .../Load/CREATE-ROUTINE-LOAD.md                    |   38 -
 .../Load/PAUSE-ROUTINE-LOAD.md                     |   38 -
 .../Load/RESUME-ROUTINE-LOAD.md                    |   38 -
 .../Load/STOP-ROUTINE-LOAD.md                      |   38 -
 .../Load/STREAM-LOAD.md                            |   38 -
 .../Manipulation/DELETE.md                         |   38 -
 .../Manipulation/INSERT.md                         |   38 -
 .../Manipulation/UPDATE.md                         |   38 -
 .../ADMIN-CANCEL-REPAIR.md                         |   38 -
 .../ADMIN-CHECK-TABLET.md                          |   38 -
 .../ADMIN-REPAIR-TABLE.md                          |   38 -
 .../ADMIN-SET-CONFIG.md                            |   38 -
 .../ADMIN-SET-REPLICA-STATUS.md                    |   38 -
 .../ADMIN-SHOW-CONFIG.md                           |   38 -
 .../ADMIN-SHOW-REPLICA-DISTRIBUTION.md             |   38 -
 .../ADMIN-SHOW-REPLICA-STATUS.md                   |   38 -
 .../ENABLE-FEATURE.md                              |   38 -
 .../INSTALL-PLUGIN.md                              |   38 -
 .../Database-Administration-Statements/KILL.md     |   38 -
 .../Database-Administration-Statements/RECOVER.md  |   38 -
 .../SET-VARIABLE.md                                |   38 -
 .../UNINSTALL-PLUGIN.md                            |   38 -
 .../sql-statements/Show-Statements/SHOW-ALTER.md   |   38 -
 .../Show-Statements/SHOW-BACKENDS.md               |   38 -
 .../sql-statements/Show-Statements/SHOW-BACKUP.md  |   38 -
 .../sql-statements/Show-Statements/SHOW-BROKER.md  |   38 -
 .../sql-statements/Show-Statements/SHOW-CHARSET.md |   38 -
 .../Show-Statements/SHOW-COLLATION.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-COLUMNS.md |   38 -
 .../Show-Statements/SHOW-CREATE-DATABASE.md        |   38 -
 .../Show-Statements/SHOW-CREATE-FUNCTION.md        |   38 -
 .../Show-Statements/SHOW-CREATE-ROUTINE-LOAD.md    |   38 -
 .../Show-Statements/SHOW-CREATE-TABLE.md           |   38 -
 .../sql-statements/Show-Statements/SHOW-DATA.md    |   38 -
 .../Show-Statements/SHOW-DATABASE-ID.md            |   38 -
 .../Show-Statements/SHOW-DATABASES.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-DELETE.md  |   38 -
 .../Show-Statements/SHOW-DYNAMIC-PARTITION.md      |   38 -
 .../Show-Statements/SHOW-ENCRYPT-KEY.md            |   38 -
 .../sql-statements/Show-Statements/SHOW-ENGINES.md |   38 -
 .../sql-statements/Show-Statements/SHOW-EVENTS.md  |   38 -
 .../sql-statements/Show-Statements/SHOW-EXPORT.md  |   38 -
 .../Show-Statements/SHOW-FRONTENDS.md              |   38 -
 .../Show-Statements/SHOW-FUNCTIONS.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-GRANTS.md  |   38 -
 .../sql-statements/Show-Statements/SHOW-INDEX.md   |   38 -
 .../Show-Statements/SHOW-LOAD-PROFILE.md           |   38 -
 .../Show-Statements/SHOW-LOAD-WARNINGS.md          |   38 -
 .../sql-statements/Show-Statements/SHOW-LOAD.md    |   38 -
 .../Show-Statements/SHOW-MIGRATIONS.md             |   38 -
 .../Show-Statements/SHOW-OPEN-TABLES.md            |   38 -
 .../Show-Statements/SHOW-PARTITION-ID.md           |   38 -
 .../Show-Statements/SHOW-PARTITIONS.md             |   38 -
 .../sql-statements/Show-Statements/SHOW-PLUGINS.md |   38 -
 .../sql-statements/Show-Statements/SHOW-PROC.md    |   38 -
 .../Show-Statements/SHOW-PROCEDURE.md              |   38 -
 .../Show-Statements/SHOW-PROCESSLIST.md            |   38 -
 .../Show-Statements/SHOW-PROPERTY.md               |   83 -
 .../Show-Statements/SHOW-QUERY-PROFILE.md          |   38 -
 .../Show-Statements/SHOW-REPOSITORIES.md           |   38 -
 .../Show-Statements/SHOW-RESOURCES.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-RESTORE.md |   38 -
 .../sql-statements/Show-Statements/SHOW-ROLES.md   |   38 -
 .../sql-statements/Show-Statements/SHOW-ROLLUP.md  |   38 -
 .../Show-Statements/SHOW-ROUTINE-LOAD-TASK.md      |   38 -
 .../Show-Statements/SHOW-ROUTINE-LOAD.md           |   38 -
 .../Show-Statements/SHOW-SMALL-FILES.md            |   38 -
 .../Show-Statements/SHOW-SNAPSHOT.md               |   38 -
 .../sql-statements/Show-Statements/SHOW-STATUS.md  |   38 -
 .../Show-Statements/SHOW-STREAM-LOAD.md            |   38 -
 .../Show-Statements/SHOW-TABLE-ID.md               |   38 -
 .../Show-Statements/SHOW-TABLE-STATUS.md           |   38 -
 .../sql-statements/Show-Statements/SHOW-TABLET.md  |   38 -
 .../Show-Statements/SHOW-TRANSACTION.md            |   38 -
 .../Show-Statements/SHOW-TRIGGERS.md               |   38 -
 .../sql-statements/Show-Statements/SHOW-USER.md    |   38 -
 .../Show-Statements/SHOW-VARIABLES.md              |   38 -
 .../sql-statements/Show-Statements/SHOW-VIEW.md    |   38 -
 .../sql-statements/Show-Statements/SHOW-WARNING.md |   38 -
 .../Show-Statements/SHOW-WHITE-LIST.md             |   38 -
 .../sql-statements/Utility-Statements/DESCRIBE.md  |   38 -
 .../sql-statements/Utility-Statements/HELP.md      |   38 -
 .../sql-statements/Utility-Statements/USE.md       |   38 -
 .../aggregate-functions/approx_count_distinct.md   |   49 -
 .../sql-functions/aggregate-functions/avg.md       |   59 -
 .../aggregate-functions/bitmap_union.md            |  146 --
 .../sql-functions/aggregate-functions/count.md     |   61 -
 .../aggregate-functions/hll_union_agg.md           |   52 -
 .../sql-functions/aggregate-functions/max.md       |   46 -
 .../sql-functions/aggregate-functions/min.md       |   46 -
 .../aggregate-functions/percentile.md              |   50 -
 .../aggregate-functions/percentile_approx.md       |   56 -
 .../sql-functions/aggregate-functions/stddev.md    |   53 -
 .../aggregate-functions/stddev_samp.md             |   46 -
 .../sql-functions/aggregate-functions/sum.md       |   46 -
 .../sql-functions/aggregate-functions/topn.md      |   61 -
 .../sql-functions/aggregate-functions/var_samp.md  |   46 -
 .../sql-functions/aggregate-functions/variance.md  |   53 -
 .../sql-functions/bitmap-functions/bitmap_and.md   |   55 -
 .../bitmap-functions/bitmap_contains.md            |   55 -
 .../sql-functions/bitmap-functions/bitmap_empty.md |   52 -
 .../bitmap-functions/bitmap_from_string.md         |   63 -
 .../bitmap-functions/bitmap_has_any.md             |   55 -
 .../sql-functions/bitmap-functions/bitmap_hash.md  |   52 -
 .../bitmap-functions/bitmap_intersect.md           |   61 -
 .../sql-functions/bitmap-functions/bitmap_min.md   |   55 -
 .../sql-functions/bitmap-functions/bitmap_not.md   |   55 -
 .../sql-functions/bitmap-functions/bitmap_or.md    |   55 -
 .../bitmap-functions/bitmap_to_string.md           |   70 -
 .../sql-functions/bitmap-functions/bitmap_union.md |   59 -
 .../sql-functions/bitmap-functions/bitmap_xor.md   |   55 -
 .../sql-functions/bitmap-functions/to_bitmap.md    |   52 -
 .../sql-reference/sql-functions/cast.md            |   83 -
 .../sql-functions/date-time-functions/curdate.md   |   53 -
 .../date-time-functions/current_timestamp.md       |   47 -
 .../sql-functions/date-time-functions/date_add.md  |   53 -
 .../date-time-functions/date_format.md             |  158 --
 .../sql-functions/date-time-functions/date_sub.md  |   53 -
 .../sql-functions/date-time-functions/datediff.md  |   59 -
 .../sql-functions/date-time-functions/day.md       |   49 -
 .../sql-functions/date-time-functions/dayname.md   |   49 -
 .../date-time-functions/dayofmonth.md              |   50 -
 .../sql-functions/date-time-functions/dayofweek.md |   55 -
 .../sql-functions/date-time-functions/dayofyear.md |   50 -
 .../sql-functions/date-time-functions/from_days.md |   46 -
 .../date-time-functions/from_unixtime.md           |   76 -
 .../sql-functions/date-time-functions/hour.md      |   48 -
 .../sql-functions/date-time-functions/makedate.md  |   45 -
 .../sql-functions/date-time-functions/minute.md    |   48 -
 .../sql-functions/date-time-functions/month.md     |   49 -
 .../sql-functions/date-time-functions/monthname.md |   49 -
 .../sql-functions/date-time-functions/now.md       |   47 -
 .../sql-functions/date-time-functions/second.md    |   48 -
 .../date-time-functions/str_to_date.md             |   72 -
 .../date-time-functions/time_round.md              |   86 -
 .../sql-functions/date-time-functions/timediff.md  |   65 -
 .../date-time-functions/timestampadd.md            |   58 -
 .../date-time-functions/timestampdiff.md           |   67 -
 .../sql-functions/date-time-functions/to_date.md   |   48 -
 .../sql-functions/date-time-functions/to_days.md   |   50 -
 .../date-time-functions/unix_timestamp.md          |   86 -
 .../date-time-functions/utc_timestamp.md           |   50 -
 .../sql-functions/date-time-functions/week.md      |   67 -
 .../date-time-functions/weekofyear.md              |   50 -
 .../sql-functions/date-time-functions/year.md      |   50 -
 .../sql-functions/date-time-functions/yearweek.md  |   79 -
 .../sql-reference/sql-functions/digital-masking.md |   56 -
 .../hash-functions/murmur_hash3_32.md              |   61 -
 .../sql-functions/spatial-functions/st_astext.md   |   47 -
 .../sql-functions/spatial-functions/st_circle.md   |   48 -
 .../sql-functions/spatial-functions/st_contains.md |   56 -
 .../spatial-functions/st_distance_sphere.md        |   47 -
 .../spatial-functions/st_geometryfromtext.md       |   47 -
 .../spatial-functions/st_linefromtext.md           |   47 -
 .../sql-functions/spatial-functions/st_point.md    |   48 -
 .../sql-functions/spatial-functions/st_polygon.md  |   48 -
 .../sql-functions/spatial-functions/st_x.md        |   47 -
 .../sql-functions/spatial-functions/st_y.md        |   47 -
 .../append_trailing_char_if_absent.md              |   60 -
 .../sql-functions/string-functions/ascii.md        |   54 -
 .../sql-functions/string-functions/bit_length.md   |   54 -
 .../sql-functions/string-functions/char_length.md  |   55 -
 .../sql-functions/string-functions/concat.md       |   61 -
 .../sql-functions/string-functions/concat_ws.md    |   63 -
 .../sql-functions/string-functions/ends_with.md    |   54 -
 .../sql-functions/string-functions/find_in_set.md  |   49 -
 .../string-functions/get_json_double.md            |   74 -
 .../sql-functions/string-functions/get_json_int.md |   74 -
 .../string-functions/get_json_string.md            |   84 -
 .../sql-functions/string-functions/group_concat.md |   63 -
 .../sql-functions/string-functions/instr.md        |   54 -
 .../sql-functions/string-functions/json_array.md   |   70 -
 .../sql-functions/string-functions/json_object.md  |   71 -
 .../sql-functions/string-functions/json_quote.md   |   70 -
 .../sql-functions/string-functions/lcase.md        |   37 -
 .../sql-functions/string-functions/left.md         |   47 -
 .../sql-functions/string-functions/length.md       |   54 -
 .../sql-functions/string-functions/like/like.md    |   83 -
 .../string-functions/like/not_like.md              |   85 -
 .../sql-functions/string-functions/locate.md       |   61 -
 .../sql-functions/string-functions/lower.md        |   47 -
 .../sql-functions/string-functions/lpad.md         |   54 -
 .../sql-functions/string-functions/ltrim.md        |   47 -
 .../sql-functions/string-functions/money_format.md |   61 -
 .../string-functions/null_or_empty.md              |   60 -
 .../string-functions/regexp/not_regexp.md          |   56 -
 .../string-functions/regexp/regexp.md              |   56 -
 .../string-functions/regexp/regexp_extract.md      |   54 -
 .../string-functions/regexp/regexp_replace.md      |   54 -
 .../sql-functions/string-functions/repeat.md       |   54 -
 .../sql-functions/string-functions/replace.md      |   46 -
 .../sql-functions/string-functions/reverse.md      |   56 -
 .../sql-functions/string-functions/right.md        |   47 -
 .../sql-functions/string-functions/rpad.md         |   54 -
 .../sql-functions/string-functions/split_part.md   |   69 -
 .../sql-functions/string-functions/starts_with.md  |   54 -
 .../sql-functions/string-functions/strleft.md      |   47 -
 .../sql-functions/string-functions/strright.md     |   48 -
 .../sql-reference/sql-functions/window-function.md |  487 ----
 .../Account-Management/CREATE-ROLE.md              |   45 -
 .../Account-Management/CREATE-USER.md              |   74 -
 .../sql-statements/Account-Management/DROP-ROLE.md |   43 -
 .../sql-statements/Account-Management/DROP-USER.md |   49 -
 .../sql-statements/Account-Management/GRANT.md     |   81 -
 .../sql-statements/Account-Management/REVOKE.md    |   48 -
 .../Account-Management/SET-PASSWORD.md             |   55 -
 .../Account-Management/SET-PROPERTY.md             |   98 -
 .../Account-Management/SHOW-GRANTS.md              |   56 -
 .../Account-Management/SHOW-ROLES.md               |   41 -
 .../Administration/ADMIN-CANCEL-REPAIR.md          |   47 -
 .../Administration/ADMIN-CHECK-TABLET.md           |   57 -
 .../Administration/ADMIN-CLEAN-TRASH.md            |   47 -
 .../sql-statements/Administration/ADMIN-REPAIR.md  |   52 -
 .../Administration/ADMIN-SET-CONFIG.md             |   44 -
 .../Administration/ADMIN-SET-REPLICA-STATUS.md     |   62 -
 .../Administration/ADMIN-SHOW-CONFIG.md            |   63 -
 .../Administration/ADMIN-SHOW-DATA-SKEW.md         |   50 -
 .../ADMIN-SHOW-REPLICA-DISTRIBUTION.md             |   51 -
 .../Administration/ADMIN-SHOW-REPLICA-STATUS.md    |   64 -
 .../sql-statements/Administration/ALTER-CLUSTER.md |   49 -
 .../sql-statements/Administration/ALTER-SYSTEM.md  |  125 -
 .../Administration/CANCEL-DECOMMISSION.md          |   40 -
 .../Administration/CREATE-CLUSTER.md               |   60 -
 .../sql-statements/Administration/CREATE-FILE.md   |   76 -
 .../sql-statements/Administration/DROP-CLUSTER.md  |   43 -
 .../sql-statements/Administration/DROP-FILE.md     |   51 -
 .../sql-statements/Administration/ENTER.md         |   44 -
 .../Administration/INSTALL-PLUGIN.md               |   63 -
 .../sql-statements/Administration/LINK-DATABASE.md |   49 -
 .../Administration/MIGRATE-DATABASE.md             |   45 -
 .../Administration/SET-LDAP-ADMIN-PASSWORD.md      |   45 -
 .../sql-statements/Administration/SHOW-BACKENDS.md |   48 -
 .../sql-statements/Administration/SHOW-BROKER.md   |   40 -
 .../sql-statements/Administration/SHOW-FILE.md     |   52 -
 .../Administration/SHOW-FRONTENDS.md               |   43 -
 .../Administration/SHOW-FULL-COLUMNS.md            |   42 -
 .../sql-statements/Administration/SHOW-INDEX.md    |   46 -
 .../Administration/SHOW-MIGRATIONS.md              |   37 -
 .../sql-statements/Administration/SHOW-PLUGINS.md  |   45 -
 .../Administration/SHOW-TABLE-STATUS.md            |   55 -
 .../sql-statements/Administration/SHOW-TRASH.md    |   53 -
 .../sql-statements/Administration/SHOW-VIEW.md     |   46 -
 .../Administration/UNINSTALL-PLUGIN.md             |   47 -
 .../Data-Definition/ALTER-DATABASE.md              |   56 -
 .../sql-statements/Data-Definition/ALTER-TABLE.md  |  427 ---
 .../sql-statements/Data-Definition/ALTER-VIEW.md   |   51 -
 .../sql-statements/Data-Definition/BACKUP.md       |   65 -
 .../sql-statements/Data-Definition/CANCEL-ALTER.md |   70 -
 .../Data-Definition/CANCEL-BACKUP.md               |   39 -
 .../Data-Definition/CANCEL-RESTORE.md              |   42 -
 .../Data-Definition/CREATE-DATABASE.md             |   39 -
 .../Data-Definition/CREATE-ENCRYPTKEY.md           |   80 -
 .../sql-statements/Data-Definition/CREATE-INDEX.md |   45 -
 .../Data-Definition/CREATE-MATERIALIZED-VIEW.md    |  238 --
 .../Data-Definition/CREATE-REPOSITORY.md           |   87 -
 .../Data-Definition/CREATE-TABLE-LIKE.md           |   78 -
 .../sql-statements/Data-Definition/CREATE-TABLE.md |  792 ------
 .../sql-statements/Data-Definition/CREATE-VIEW.md  |   68 -
 .../Data-Definition/Colocate-Join.md               |   98 -
 .../Data-Definition/DROP-DATABASE.md               |   43 -
 .../Data-Definition/DROP-ENCRYPTKEY.md             |   55 -
 .../sql-statements/Data-Definition/DROP-INDEX.md   |   37 -
 .../Data-Definition/DROP-MATERIALIZED-VIEW.md      |  110 -
 .../Data-Definition/DROP-REPOSITORY.md             |   41 -
 .../sql-statements/Data-Definition/DROP-TABLE.md   |   46 -
 .../sql-statements/Data-Definition/DROP-VIEW.md    |   40 -
 .../sql-statements/Data-Definition/HLL.md          |  111 -
 .../sql-statements/Data-Definition/RECOVER.md      |   54 -
 .../sql-statements/Data-Definition/RESTORE.md      |   78 -
 .../Data-Definition/SHOW-ENCRYPTKEYS.md            |   68 -
 .../Data-Definition/SHOW-RESOURCES.md              |   64 -
 .../Data-Definition/TRUNCATE-TABLE.md              |   52 -
 .../Data-Definition/create-function.md             |  138 -
 .../Data-Definition/drop-function.md               |   54 -
 .../Data-Definition/show-functions.md              |   83 -
 .../sql-statements/Data-Manipulation/BEGIN.md      |   92 -
 .../Data-Manipulation/BROKER-LOAD.md               |  583 -----
 .../Data-Manipulation/CANCEL-DELETE.md             |   36 -
 .../Data-Manipulation/CANCEL-LABEL.md              |   53 -
 .../Data-Manipulation/CANCEL-LOAD.md               |   45 -
 .../Data-Manipulation/CREATE-SYNC-JOB.md           |  165 --
 .../sql-statements/Data-Manipulation/DELETE.md     |   66 -
 .../sql-statements/Data-Manipulation/EXPORT.md     |  101 -
 .../Data-Manipulation/GET-LABEL-STATE.md           |   58 -
 .../sql-statements/Data-Manipulation/GROUP-BY.md   |  168 --
 .../sql-statements/Data-Manipulation/LOAD.md       |  285 ---
 .../sql-statements/Data-Manipulation/MINI-LOAD.md  |  132 -
 .../sql-statements/Data-Manipulation/MULTI-LOAD.md |  107 -
 .../Data-Manipulation/PAUSE-ROUTINE-LOAD.md        |   40 -
 .../Data-Manipulation/PAUSE-SYNC-JOB.md            |   48 -
 .../Data-Manipulation/RESTORE-TABLET.md            |   41 -
 .../Data-Manipulation/RESUME-ROUTINE-LOAD.md       |   40 -
 .../Data-Manipulation/RESUME-SYNC-JOB.md           |   46 -
 .../Data-Manipulation/ROUTINE-LOAD.md              |  585 -----
 .../sql-statements/Data-Manipulation/SHOW-ALTER.md |   55 -
 .../Data-Manipulation/SHOW-BACKUP.md               |   62 -
 .../Data-Manipulation/SHOW-CREATE-FUNCTION.md      |   43 -
 .../Data-Manipulation/SHOW-CREATE-ROUTINE-LOAD.md  |   45 -
 .../sql-statements/Data-Manipulation/SHOW-DATA.md  |  110 -
 .../Data-Manipulation/SHOW-DATABASE-ID.md          |   38 -
 .../Data-Manipulation/SHOW-DATABASES.md            |   35 -
 .../Data-Manipulation/SHOW-DELETE.md               |   39 -
 .../SHOW-DYNAMIC-PARTITION-TABLES.md               |   36 -
 .../Data-Manipulation/SHOW-EXPORT.md               |   67 -
 .../sql-statements/Data-Manipulation/SHOW-LOAD.md  |   74 -
 .../Data-Manipulation/SHOW-PARTITION-ID.md         |   38 -
 .../Data-Manipulation/SHOW-PARTITIONS.md           |   48 -
 .../Data-Manipulation/SHOW-PROPERTY.md             |   42 -
 .../Data-Manipulation/SHOW-REPOSITORIES.md         |   49 -
 .../Data-Manipulation/SHOW-RESTORE.md              |   67 -
 .../Data-Manipulation/SHOW-ROUTINE-LOAD-TASK.md    |   35 -
 .../Data-Manipulation/SHOW-ROUTINE-LOAD.md         |   57 -
 .../Data-Manipulation/SHOW-SNAPSHOT.md             |   56 -
 .../Data-Manipulation/SHOW-STREAM-LOAD.md          |   68 -
 .../Data-Manipulation/SHOW-SYNC-JOB.md             |   49 -
 .../Data-Manipulation/SHOW-TABLE-ID.md             |   38 -
 .../Data-Manipulation/SHOW-TABLES.md               |   34 -
 .../Data-Manipulation/SHOW-TABLET.md               |   42 -
 .../Data-Manipulation/SHOW-TRANSACTION.md          |   92 -
 .../Data-Manipulation/STOP-ROUTINE-LOAD.md         |   35 -
 .../Data-Manipulation/STOP-SYNC-JOB.md             |   44 -
 .../Data-Manipulation/STREAM-LOAD.md               |  280 --
 .../sql-statements/Data-Manipulation/UPDATE.md     |   75 -
 .../Data-Manipulation/alter-routine-load.md        |  115 -
 .../sql-statements/Data-Manipulation/insert.md     |  110 -
 .../sql-statements/Data-Types/BIGINT.md            |   33 -
 .../sql-statements/Data-Types/BITMAP.md            |   48 -
 .../sql-statements/Data-Types/BOOLEAN.md           |   33 -
 .../sql-statements/Data-Types/CHAR.md              |   33 -
 .../sql-statements/Data-Types/DATE.md              |   41 -
 .../sql-statements/Data-Types/DATETIME.md          |   34 -
 .../sql-statements/Data-Types/DECIMAL.md           |   34 -
 .../sql-statements/Data-Types/DOUBLE.md            |   33 -
 .../sql-statements/Data-Types/FLOAT.md             |   33 -
 .../sql-reference/sql-statements/Data-Types/HLL.md |   49 -
 .../sql-reference/sql-statements/Data-Types/INT.md |   33 -
 .../sql-statements/Data-Types/SMALLINT.md          |   33 -
 .../sql-statements/Data-Types/STRING.md            |   35 -
 .../sql-statements/Data-Types/TINYINT.md           |   33 -
 .../sql-statements/Data-Types/VARCHAR.md           |   35 -
 .../sql-statements/Utility/util_stmt.md            |   39 -
 .../version-1.2/admin-manual/certificate.md        |   77 +
 .../cluster-management/elastic-expansion.md        |  154 ++
 .../admin-manual/cluster-management/fqdn.md        |   82 +
 .../cluster-management/load-balancing.md           |  636 +++++
 .../admin-manual/cluster-management/upgrade.md     |  100 +
 .../version-1.2/admin-manual/config/be-config.md   | 1425 +++++++++++
 .../version-1.2/admin-manual/config/config-dir.md  |   49 +
 .../admin-manual/config/fe-config-template.md      |  133 +
 .../version-1.2/admin-manual/config/fe-config.md   | 2703 +++++++++++++++++++
 .../admin-manual/config/user-property.md           |    0
 .../version-1.2/admin-manual/data-admin/backup.md  |  233 ++
 .../admin-manual/data-admin/delete-recover.md      |   53 +
 .../admin-manual/data-admin/restore.md             |    0
 .../version-1.2/admin-manual/fe-certificate.md     |   46 +
 .../http-actions/be/be-version-info-action.md      |   99 +
 .../http-actions/be/check-reset-rpc-cache.md       |   47 +
 .../http-actions/be/check-tablet-segment-action.md |   53 +
 .../http-actions/be/compaction-action.md           |  211 ++
 .../admin-manual/http-actions/be}/get-tablets.md   |    0
 .../admin-manual/http-actions/be/pad-rowset.md     |   41 +
 .../http-actions/be}/restore-tablet.md             |    0
 .../http-actions/be}/tablet-migration-action.md    |    0
 .../http-actions/be}/tablets_distribution.md       |    0
 .../http-actions/fe/backends-action.md             |   70 +
 .../http-actions/fe/bootstrap-action.md            |  121 +
 .../http-actions/fe/cancel-load-action.md          |  102 +
 .../http-actions/fe/check-decommission-action.md   |    0
 .../http-actions/fe/check-storage-type-action.md   |    0
 .../admin-manual/http-actions/fe/cluster-action.md |   89 +
 .../http-actions/fe/colocate-meta-action.md        |   59 +
 .../admin-manual/http-actions/fe/config-action.md  |   85 +
 .../http-actions/fe/connection-action.md           |    0
 .../http-actions/fe/extra-basepath-action.md       |   58 +
 .../http-actions/fe/fe-version-info-action.md      |  101 +
 .../http-actions/fe/get-ddl-stmt-action.md         |    0
 .../http-actions/fe/get-load-info-action.md        |    0
 .../admin-manual/http-actions/fe/get-load-state.md |   94 +
 .../http-actions/fe/get-log-file-action.md         |    0
 .../admin-manual/http-actions/fe/get-small-file.md |  102 +
 .../admin-manual/http-actions/fe/ha-action.md      |    0
 .../http-actions/fe/hardware-info-action.md        |    0
 .../admin-manual/http-actions/fe/health-action.md  |    0
 .../admin-manual/http-actions/fe/help-action.md    |   61 +
 .../admin-manual/http-actions/fe/import-action.md  |   53 +
 .../admin-manual/http-actions/fe/log-action.md     |    0
 .../admin-manual/http-actions/fe/login-action.md   |   70 +
 .../admin-manual/http-actions/fe/logout-action.md  |    0
 .../admin-manual/http-actions/fe/meta-action.md    |    0
 .../http-actions/fe/meta-info-action-V2.md         |   72 +
 .../http-actions/fe/meta-info-action.md            |    0
 .../http-actions/fe/meta-replay-state-action.md    |    0
 .../admin-manual/http-actions/fe/metrics-action.md |   55 +
 .../admin-manual/http-actions/fe/node-action.md    |  621 +++++
 .../admin-manual/http-actions/fe/profile-action.md |  166 ++
 .../http-actions/fe/query-detail-action.md         |    0
 .../fe/query-profile-action-controller.md          |  108 +
 .../http-actions/fe/query-profile-action.md        |  475 ++++
 .../http-actions/fe/query-schema-action.md         |  108 +
 .../http-actions/fe/row-count-action.md            |    0
 .../admin-manual/http-actions/fe/session-action.md |    0
 .../http-actions/fe/set-config-action.md           |    0
 .../http-actions/fe/show-data-action.md            |    0
 .../http-actions/fe/show-meta-info-action.md       |    0
 .../http-actions/fe/show-proc-action.md            |    0
 .../http-actions/fe/show-runtime-info-action.md    |    0
 .../http-actions/fe/statement-execution-action.md  |    0
 .../http-actions/fe/statistic-action.md            |   58 +
 .../admin-manual/http-actions/fe/system-action.md  |    0
 .../http-actions/fe/table-query-plan-action.md     |    0
 .../http-actions/fe/table-row-count-action.md      |    0
 .../http-actions/fe/table-schema-action.md         |  155 ++
 .../admin-manual/http-actions/fe/upload-action.md  |    0
 .../maint-monitor/be-olap-error-code.md            |  255 ++
 .../admin-manual/maint-monitor/disk-capacity.md    |  167 ++
 .../admin-manual/maint-monitor/doris-error-code.md |    0
 .../memory-management/be-oom-analysis.md           |   84 +
 .../memory-limit-exceeded-analysis.md              |  179 ++
 .../memory-management/memory-tracker.md            |   98 +
 .../maint-monitor/metadata-operation.md            |  408 +++
 .../admin-manual/maint-monitor/monitor-alert.md    |  312 +++
 .../maint-monitor/monitor-metrics/metrics.md       |   30 +
 .../admin-manual/maint-monitor}/multi-tenant.md    |    0
 .../maint-monitor/tablet-local-debug.md            |  224 ++
 .../admin-manual/maint-monitor/tablet-meta-tool.md |    0
 .../maint-monitor/tablet-repair-and-balance.md     |  781 ++++++
 .../maint-monitor/tablet-restore-tool.md           |    0
 .../version-1.2}/admin-manual/multi-tenant.md      |    0
 .../version-1.2}/admin-manual/optimization.md      |    0
 .../admin-manual/privilege-ldap/ldap.md            |  173 ++
 .../admin-manual/privilege-ldap/user-privilege.md  |  283 ++
 .../version-1.2/admin-manual/query-profile.md      |  278 ++
 .../version-1.2}/admin-manual/sql-interception.md  |    0
 .../admin-manual/system-table/rowsets.md           |   82 +
 versioned_docs/version-1.2/admin-manual/tracing.md |  205 ++
 .../advanced/alter-table/replace-table.md          |    0
 .../advanced/alter-table/schema-change.md          |  287 +++
 versioned_docs/version-1.2/advanced/autobucket.md  |  175 ++
 .../advanced/best-practice/compaction.md           |   74 +
 .../advanced/best-practice/debug-log.md            |    0
 .../advanced/best-practice/import-analysis.md      |  202 ++
 .../advanced/best-practice/query-analysis.md       |  671 +++++
 versioned_docs/version-1.2/advanced/broker.md      |  250 ++
 .../version-1.2}/advanced/cache/partition-cache.md |    0
 .../version-1.2}/advanced/cache/query-cache.md     |    0
 .../version-1.2/advanced/cold_hot_separation.md    |  128 +
 .../version-1.2/advanced/compute_node.md           |  121 +
 .../version-1.2/advanced/lateral-view.md           |   94 +
 .../advanced/orthogonal-bitmap-manual.md           |  202 ++
 .../version-1.2}/advanced/orthogonal-hll-manual.md |    0
 .../advanced/partition/dynamic-partition.md        |  558 ++++
 .../advanced/partition/table-temp-partition.md     |  288 +++
 versioned_docs/version-1.2/advanced/resource.md    |  154 ++
 .../version-1.2}/advanced/small-file-mgr.md        |    0
 .../version-1.2}/advanced/sql-mode.md              |    0
 .../version-1.2}/advanced/time-zone.md             |    0
 .../version-1.2}/advanced/using-hll.md             |    0
 .../version-1.2/advanced/variables-template.md     |  116 +
 versioned_docs/version-1.2/advanced/variables.md   |  670 +++++
 versioned_docs/version-1.2/benchmark/ssb.md        |  607 +++++
 versioned_docs/version-1.2/benchmark/tpch.md       |  878 +++++++
 .../data-operate/export/export-manual.md           |  243 ++
 .../data-operate/export/export_with_mysql_dump.md  |    0
 .../version-1.2}/data-operate/export/outfile.md    |    0
 .../import/import-scenes/external-storage-load.md  |  193 ++
 .../import/import-scenes/external-table-load.md    |  123 +
 .../data-operate/import/import-scenes/jdbc-load.md |  163 ++
 .../import/import-scenes/kafka-load.md             |  133 +
 .../import/import-scenes/load-atomicity.md         |   49 +
 .../import/import-scenes/load-data-convert.md      |  366 +++
 .../import/import-scenes/load-strict-mode.md       |    0
 .../import/import-scenes/local-file-load.md        |  275 ++
 .../import/import-way/binlog-load-manual.md        |  552 ++++
 .../import/import-way/broker-load-manual.md        |  439 ++++
 .../import/import-way/insert-into-manual.md        |  264 ++
 .../import/import-way/load-json-format.md          |  561 ++++
 .../import/import-way/mysql-load-manual.md         |  152 ++
 .../import/import-way/routine-load-manual.md       |  462 ++++
 .../import/import-way/s3-load-manual.md            |  111 +
 .../import/import-way/spark-load-manual.md         |  783 ++++++
 .../import/import-way/stream-load-manual.md        |  429 ++++
 .../version-1.2/data-operate/import/load-manual.md |  102 +
 .../update-delete/batch-delete-manual.md           |  307 +++
 .../data-operate/update-delete/delete-manual.md    |    0
 .../update-delete/sequence-column-manual.md        |  250 ++
 .../data-operate/update-delete/update.md           |  132 +
 .../version-1.2}/data-table/advance-usage.md       |    0
 .../version-1.2/data-table/basic-usage.md          |  705 +++++
 .../version-1.2/data-table/best-practice.md        |  183 ++
 .../version-1.2/data-table/data-model.md           |  544 ++++
 .../version-1.2/data-table/data-partition.md       |  421 +++
 .../version-1.2/data-table/dynamic-schema-table.md |  135 +
 .../version-1.2/data-table/hit-the-rollup.md       |  452 ++++
 .../version-1.2/data-table/index/bitmap-index.md   |   83 +
 .../version-1.2}/data-table/index/bloomfilter.md   |    0
 .../version-1.2/data-table/index/inverted-index.md |  405 +++
 .../data-table/index/ngram-bloomfilter-index.md    |   82 +
 .../version-1.2/data-table/index/prefix-index.md   |   87 +
 .../version-1.2/ecosystem/audit-plugin.md          |  144 ++
 versioned_docs/version-1.2/ecosystem/beats.md      |  280 ++
 versioned_docs/version-1.2/ecosystem/cloudcanal.md |   35 +
 versioned_docs/version-1.2/ecosystem/datax.md      |  395 +++
 .../version-1.2/ecosystem/flink-doris-connector.md |  528 ++++
 .../version-1.2/ecosystem/hive-bitmap-udf.md       |  111 +
 versioned_docs/version-1.2/ecosystem/kyuubi.md     |  115 +
 versioned_docs/version-1.2/ecosystem/logstash.md   |  198 ++
 .../version-1.2/ecosystem/mysql-to-doris.md        |  105 +
 .../ecosystem/plugin-development-manual.md         |  314 +++
 versioned_docs/version-1.2/ecosystem/seatunnel.md  |  323 +++
 .../version-1.2/ecosystem/spark-doris-connector.md |  322 +++
 .../remote-user-defined-aggregation-function.md    |  115 +
 .../version-1.2/ecosystem/udf/contribute-udf.md    |  124 +
 .../ecosystem/udf/java-user-defined-function.md    |  213 ++
 .../ecosystem/udf/native-user-defined-function.md  |  271 ++
 .../ecosystem/udf/remote-user-defined-function.md  |  109 +
 versioned_docs/version-1.2/faq/data-faq.md         |  171 ++
 versioned_docs/version-1.2/faq/install-faq.md      |  318 +++
 versioned_docs/version-1.2/faq/sql-faq.md          |   96 +
 .../version-1.2/get-starting/get-starting.md       |  431 ++++
 .../construct-docker/construct-docker-image.md     |  297 +++
 .../install/construct-docker/run-docker-cluster.md |  222 ++
 versioned_docs/version-1.2/install/k8s-deploy.md   |   89 +
 .../install/source-install/compilation-arm.md      |  591 +++++
 .../install/source-install/compilation-general.md  |  255 ++
 .../install/source-install/compilation-mac.md      |  113 +
 .../install/source-install/compilation-win.md      |   94 +
 .../compilation-with-ldb-toolchain.md              |  138 +
 .../version-1.2/install/standard-deployment.md     |  389 +++
 .../version-1.2/lakehouse/external-table/es.md     |  595 +++++
 .../version-1.2/lakehouse/external-table/hive.md   |   34 +
 .../version-1.2/lakehouse/external-table/jdbc.md   |  414 +++
 .../version-1.2/lakehouse/external-table/odbc.md   |   34 +
 versioned_docs/version-1.2/lakehouse/file.md       |  204 ++
 versioned_docs/version-1.2/lakehouse/filecache.md  |   95 +
 .../version-1.2/lakehouse/multi-catalog/dlf.md     |  117 +
 .../version-1.2/lakehouse/multi-catalog/es.md      |  514 ++++
 .../version-1.2/lakehouse/multi-catalog/faq.md     |  111 +
 .../version-1.2/lakehouse/multi-catalog/hive.md    |  322 +++
 .../version-1.2/lakehouse/multi-catalog/hudi.md    |   54 +
 .../version-1.2/lakehouse/multi-catalog/iceberg.md |  154 ++
 .../version-1.2/lakehouse/multi-catalog/jdbc.md    |  579 +++++
 .../lakehouse/multi-catalog/multi-catalog.md       |  395 +++
 .../hight-concurrent-point-query.md                |  106 +
 .../join-optimization/bucket-shuffle-join.md       |    0
 .../join-optimization/colocation-join.md           |  428 ++++
 .../join-optimization/doris-join-optimization.md   |    0
 .../join-optimization/runtime-filter.md            |  285 +++
 .../query-acceleration/materialized-view.md        |  540 ++++
 .../version-1.2/query-acceleration/nereids.md      |   87 +
 .../pipeline-execution-engine.md                   |   78 +
 .../version-1.2/releasenotes/release-1.1.0.md      |  378 +++
 .../version-1.2}/releasenotes/release-1.1.1.md     |    0
 .../version-1.2}/releasenotes/release-1.1.2.md     |    0
 .../version-1.2}/releasenotes/release-1.1.3.md     |    0
 .../version-1.2}/releasenotes/release-1.1.4.md     |    0
 .../version-1.2/releasenotes/release-1.1.5.md      |   65 +
 .../version-1.2/releasenotes/release-1.2.0.md      |  563 ++++
 .../version-1.2/releasenotes/release-1.2.1.md      |  196 ++
 .../version-1.2/releasenotes/release-1.2.2.md      |  254 ++
 .../version-1.2/releasenotes/release-1.2.3.md      |  109 +
 .../version-1.2/releasenotes/release-1.2.4.1.md    |   81 +
 .../releasenotes/release-2.0.0Alpha1.md            |  141 +
 .../sql-functions/aggregate-functions/any_value.md |   56 +
 .../aggregate-functions/approx_count_distinct.md   |    0
 .../sql-functions/aggregate-functions/avg.md       |    0
 .../aggregate-functions/avg_weighted.md            |   51 +
 .../aggregate-functions/bitmap_union.md            |  149 ++
 .../aggregate-functions/collect_list.md            |   79 +
 .../aggregate-functions/collect_set.md             |   86 +
 .../sql-functions/aggregate-functions/count.md     |    0
 .../aggregate-functions/group_bit_and.md           |   60 +
 .../aggregate-functions/group_bit_or.md            |   60 +
 .../aggregate-functions/group_bit_xor.md           |   60 +
 .../aggregate-functions/group_bitmap_xor.md        |   57 +
 .../aggregate-functions/group_concat.md            |   95 +
 .../sql-functions/aggregate-functions/grouping.md  |  108 +
 .../aggregate-functions/grouping_id.md             |  240 ++
 .../sql-functions/aggregate-functions/histogram.md |  108 +
 .../aggregate-functions/hll_union_agg.md           |    0
 .../sql-functions/aggregate-functions/max.md       |    0
 .../sql-functions/aggregate-functions/max_by.md    |    0
 .../sql-functions/aggregate-functions/min.md       |    0
 .../sql-functions/aggregate-functions/min_by.md    |    0
 .../aggregate-functions/percentile.md              |   58 +
 .../aggregate-functions/percentile_approx.md       |    0
 .../aggregate-functions/percentile_array.md        |   52 +
 .../sql-functions/aggregate-functions/retention.md |  143 ++
 .../aggregate-functions/sequence_count.md          |  254 ++
 .../aggregate-functions/sequence_match.md          |  256 ++
 .../sql-functions/aggregate-functions/stddev.md    |    0
 .../aggregate-functions/stddev_samp.md             |    0
 .../sql-functions/aggregate-functions/sum.md       |    0
 .../sql-functions/aggregate-functions/topn.md      |    0
 .../aggregate-functions/topn_array.md              |   61 +
 .../aggregate-functions/topn_weighted.md           |   60 +
 .../sql-functions/aggregate-functions/var_samp.md  |    0
 .../sql-functions/aggregate-functions/variance.md  |    0
 .../sql-functions/array-functions/array.md         |   90 +
 .../sql-functions/array-functions/array_apply.md   |   81 +
 .../sql-functions/array-functions/array_avg.md     |   66 +
 .../sql-functions/array-functions/array_compact.md |   86 +
 .../sql-functions/array-functions/array_concat.md  |   75 +
 .../array-functions/array_contains.md              |   80 +
 .../sql-functions/array-functions/array_cum_sum.md |   70 +
 .../array-functions/array_difference.md            |   71 +
 .../array-functions/array_distinct.md              |   84 +
 .../array-functions/array_enumerate.md             |   65 +
 .../array-functions/array_enumerate_uniq.md        |   62 +
 .../sql-functions/array-functions/array_except.md  |   93 +
 .../sql-functions/array-functions/array_exists.md  |  120 +
 .../sql-functions/array-functions/array_filter.md  |  108 +
 .../array-functions/array_first_index.md           |   87 +
 .../array-functions/array_intersect.md             |   95 +
 .../sql-functions/array-functions/array_join.md    |  109 +
 .../sql-functions/array-functions/array_map.md     |  171 ++
 .../sql-functions/array-functions/array_max.md     |   65 +
 .../sql-functions/array-functions/array_min.md     |   65 +
 .../sql-functions/array-functions/array_popback.md |   62 +
 .../array-functions/array_popfront.md              |   62 +
 .../array-functions/array_position.md              |   80 +
 .../sql-functions/array-functions/array_product.md |   66 +
 .../array-functions/array_pushfront.md             |   84 +
 .../sql-functions/array-functions/array_range.md   |   82 +
 .../sql-functions/array-functions/array_remove.md  |  102 +
 .../array-functions/array_reverse_sort.md          |   82 +
 .../sql-functions/array-functions/array_shuffle.md |   85 +
 .../sql-functions/array-functions/array_size.md    |   88 +
 .../sql-functions/array-functions/array_slice.md   |  162 ++
 .../sql-functions/array-functions/array_sort.md    |   83 +
 .../sql-functions/array-functions/array_sortby.md  |   95 +
 .../sql-functions/array-functions/array_sum.md     |   69 +
 .../sql-functions/array-functions/array_union.md   |   94 +
 .../array-functions/array_with_constant.md         |   88 +
 .../sql-functions/array-functions/array_zip.md     |   63 +
 .../array-functions/arrays_overlap.md              |   73 +
 .../sql-functions/array-functions/countequal.md    |   87 +
 .../sql-functions/array-functions/element_at.md    |   88 +
 .../sql-functions/bitmap-functions/bitmap_and.md   |    0
 .../bitmap-functions/bitmap_and_count.md           |    0
 .../bitmap-functions/bitmap_and_not.md             |    0
 .../bitmap-functions/bitmap_and_not_count.md       |    0
 .../bitmap-functions/bitmap_contains.md            |   55 +
 .../sql-functions/bitmap-functions/bitmap_count.md |   56 +
 .../sql-functions/bitmap-functions/bitmap_empty.md |    0
 .../bitmap-functions/bitmap_from_array.md          |   53 +
 .../bitmap-functions/bitmap_from_string.md         |   70 +
 .../bitmap-functions/bitmap_has_all.md             |   56 +
 .../bitmap-functions/bitmap_has_any.md             |   55 +
 .../sql-functions/bitmap-functions/bitmap_hash.md  |  112 +
 .../bitmap-functions/bitmap_hash64.md              |   52 +
 .../bitmap-functions/bitmap_intersect.md           |    0
 .../sql-functions/bitmap-functions/bitmap_max.md   |    0
 .../sql-functions/bitmap-functions/bitmap_min.md   |    0
 .../sql-functions/bitmap-functions/bitmap_not.md   |    0
 .../sql-functions/bitmap-functions/bitmap_or.md    |    0
 .../bitmap-functions/bitmap_or_count.md            |    0
 .../bitmap-functions/bitmap_subset_in_range.md     |    0
 .../bitmap-functions/bitmap_subset_limit.md        |    0
 .../bitmap-functions/bitmap_to_array.md            |   70 +
 .../bitmap-functions/bitmap_to_string.md           |    0
 .../sql-functions/bitmap-functions/bitmap_union.md |    0
 .../sql-functions/bitmap-functions/bitmap_xor.md   |    0
 .../bitmap-functions/bitmap_xor_count.md           |    0
 .../bitmap-functions/intersect_count.md            |    0
 .../orthogonal_bitmap_expr_calculate.md            |   47 +
 .../orthogonal_bitmap_expr_calculate_count.md      |   47 +
 .../orthogonal_bitmap_intersect.md                 |    0
 .../orthogonal_bitmap_intersect_count.md           |    0
 .../orthogonal_bitmap_union_count.md               |    0
 .../sql-functions/bitmap-functions/sub_bitmap.md   |    0
 .../sql-functions/bitmap-functions/to_bitmap.md    |    0
 .../sql-functions/bitwise-functions/bitand.md      |    0
 .../sql-functions/bitwise-functions/bitnot.md      |    0
 .../sql-functions/bitwise-functions/bitor.md       |    0
 .../sql-functions/bitwise-functions/bitxor.md      |    0
 .../version-1.2/sql-manual/sql-functions/cast.md   |   71 +
 .../sql-functions/conditional-functions/case.md    |    0
 .../conditional-functions/coalesce.md              |    0
 .../sql-functions/conditional-functions/if.md      |    0
 .../sql-functions/conditional-functions/ifnull.md  |    0
 .../sql-functions/conditional-functions/nullif.md  |    0
 .../sql-functions/conditional-functions/nvl.md     |   61 +
 .../date-time-functions/convert_tz.md              |    0
 .../sql-functions/date-time-functions/curdate.md   |    0
 .../date-time-functions/current_timestamp.md       |   69 +
 .../sql-functions/date-time-functions/curtime.md   |    0
 .../sql-functions/date-time-functions/date_add.md  |   53 +
 .../date-time-functions/date_format.md             |  166 ++
 .../sql-functions/date-time-functions/date_sub.md  |   53 +
 .../date-time-functions/date_trunc.md              |  107 +
 .../sql-functions/date-time-functions/datediff.md  |   59 +
 .../sql-functions/date-time-functions/day.md       |   49 +
 .../sql-functions/date-time-functions/dayname.md   |   49 +
 .../date-time-functions/dayofmonth.md              |   50 +
 .../sql-functions/date-time-functions/dayofweek.md |   55 +
 .../sql-functions/date-time-functions/dayofyear.md |   50 +
 .../sql-functions/date-time-functions/days_add.md  |    0
 .../sql-functions/date-time-functions/days_diff.md |   55 +
 .../sql-functions/date-time-functions/days_sub.md  |    0
 .../sql-functions/date-time-functions/extract.md   |    0
 .../sql-functions/date-time-functions/from_days.md |   48 +
 .../date-time-functions/from_unixtime.md           |    0
 .../sql-functions/date-time-functions/hour.md      |   48 +
 .../sql-functions/date-time-functions/hours_add.md |    0
 .../date-time-functions/hours_diff.md              |    0
 .../sql-functions/date-time-functions/hours_sub.md |    0
 .../sql-functions/date-time-functions/last_day.md  |   49 +
 .../sql-functions/date-time-functions/localtime.md |    0
 .../sql-functions/date-time-functions/makedate.md  |   45 +
 .../date-time-functions/microseconds_add.md        |   50 +
 .../date-time-functions/microseconds_sub.md        |   48 +
 .../sql-functions/date-time-functions/minute.md    |   48 +
 .../date-time-functions/minutes_add.md             |    0
 .../date-time-functions/minutes_diff.md            |    0
 .../date-time-functions/minutes_sub.md             |    0
 .../sql-functions/date-time-functions/month.md     |   49 +
 .../sql-functions/date-time-functions/monthname.md |   49 +
 .../date-time-functions/months_add.md              |    0
 .../date-time-functions/months_diff.md             |    0
 .../date-time-functions/months_sub.md              |    0
 .../sql-functions/date-time-functions/now.md       |   69 +
 .../sql-functions/date-time-functions/quarter.md   |    0
 .../sql-functions/date-time-functions/second.md    |   48 +
 .../date-time-functions/seconds_add.md             |    0
 .../date-time-functions/seconds_diff.md            |    0
 .../date-time-functions/seconds_sub.md             |    0
 .../date-time-functions/str_to_date.md             |   72 +
 .../date-time-functions/time_round.md              |   85 +
 .../date-time-functions/time_to_sec.md             |   48 +
 .../sql-functions/date-time-functions/timediff.md  |   65 +
 .../date-time-functions/timestampadd.md            |   58 +
 .../date-time-functions/timestampdiff.md           |   67 +
 .../sql-functions/date-time-functions/to_date.md   |    0
 .../sql-functions/date-time-functions/to_days.md   |   50 +
 .../sql-functions/date-time-functions/to_monday.md |   46 +
 .../date-time-functions/unix_timestamp.md          |   86 +
 .../date-time-functions/utc_timestamp.md           |   51 +
 .../sql-functions/date-time-functions/week.md      |   67 +
 .../sql-functions/date-time-functions/weekday.md   |   66 +
 .../date-time-functions/weekofyear.md              |   50 +
 .../sql-functions/date-time-functions/weeks_add.md |    0
 .../date-time-functions/weeks_diff.md              |    0
 .../sql-functions/date-time-functions/weeks_sub.md |    0
 .../sql-functions/date-time-functions/year.md      |   50 +
 .../sql-functions/date-time-functions/years_add.md |    0
 .../date-time-functions/years_diff.md              |    0
 .../sql-functions/date-time-functions/years_sub.md |    0
 .../sql-functions/date-time-functions/yearweek.md  |   79 +
 .../sql-manual/sql-functions/digital-masking.md    |    0
 .../sql-functions/encrypt-digest-functions/aes.md  |  168 ++
 .../sql-functions/encrypt-digest-functions/md5.md  |    0
 .../encrypt-digest-functions/md5sum.md             |    0
 .../sql-functions/encrypt-digest-functions/sm3.md  |    0
 .../encrypt-digest-functions/sm3sum.md             |    0
 .../sql-functions/encrypt-digest-functions/sm4.md  |    0
 .../hash-functions/murmur_hash3_32.md              |    0
 .../hash-functions/murmur_hash3_64.md              |   61 +
 .../sql-functions/hll-functions/hll_cardinality.md |   45 +
 .../sql-functions/hll-functions/hll_empty.md       |   45 +
 .../sql-functions/hll-functions/hll_hash.md        |   46 +
 .../json-functions/get_json_bigint.md              |   76 +
 .../json-functions/get_json_double.md              |   76 +
 .../sql-functions/json-functions/get_json_int.md   |   76 +
 .../json-functions/get_json_string.md              |   86 +
 .../sql-functions/json-functions/json_array.md     |   70 +
 .../sql-functions/json-functions/json_extract.md   |   74 +
 .../sql-functions/json-functions/json_object.md    |   71 +
 .../sql-functions/json-functions/json_quote.md     |   70 +
 .../sql-functions/json-functions/json_unquote.md   |   83 +
 .../sql-functions/json-functions/json_valid.md     |   75 +
 .../json-functions/jsonb_exists_path.md            |   46 +
 .../sql-functions/json-functions/jsonb_extract.md  |   91 +
 .../sql-functions/json-functions/jsonb_parse.md    |   84 +
 .../sql-functions/json-functions/jsonb_type.md     |   55 +
 .../sql-manual/sql-functions/math-functions/abs.md |   67 +
 .../sql-functions/math-functions/acos.md           |    0
 .../sql-functions/math-functions/asin.md           |    0
 .../sql-functions/math-functions/atan.md           |    0
 .../sql-manual/sql-functions/math-functions/bin.md |    0
 .../sql-functions/math-functions/cbrt.md           |    0
 .../sql-functions/math-functions/ceil.md           |    0
 .../sql-functions/math-functions/conv.md           |   62 +
 .../sql-manual/sql-functions/math-functions/cos.md |    0
 .../sql-functions/math-functions/degrees.md        |    0
 .../sql-manual/sql-functions/math-functions/e.md   |    0
 .../sql-manual/sql-functions/math-functions/exp.md |    0
 .../sql-functions/math-functions/floor.md          |    0
 .../sql-functions/math-functions/greatest.md       |    0
 .../sql-functions/math-functions/least.md          |    0
 .../sql-manual/sql-functions/math-functions/ln.md  |    0
 .../sql-manual/sql-functions/math-functions/log.md |    0
 .../sql-functions/math-functions/log10.md          |    0
 .../sql-functions/math-functions/log2.md           |    0
 .../sql-manual/sql-functions/math-functions/mod.md |   55 +
 .../sql-functions/math-functions/negative.md       |   55 +
 .../sql-manual/sql-functions/math-functions/pi.md  |    0
 .../sql-functions/math-functions/pmod.md           |   56 +
 .../sql-functions/math-functions/positive.md       |   55 +
 .../sql-manual/sql-functions/math-functions/pow.md |    0
 .../sql-functions/math-functions/radians.md        |    0
 .../sql-functions/math-functions/random.md         |   45 +
 .../sql-functions/math-functions/round.md          |   75 +
 .../sql-functions/math-functions/round_bankers.md  |   80 +
 .../math-functions/running_difference.md           |  187 ++
 .../sql-functions/math-functions/sign.md           |    0
 .../sql-manual/sql-functions/math-functions/sin.md |    0
 .../sql-functions/math-functions/sqrt.md           |   57 +
 .../sql-manual/sql-functions/math-functions/tan.md |    0
 .../sql-functions/math-functions/truncate.md       |    0
 .../sql-functions/spatial-functions/st_angle.md    |   89 +
 .../spatial-functions/st_angle_sphere.md           |   59 +
 .../sql-functions/spatial-functions/st_area.md     |   80 +
 .../sql-functions/spatial-functions/st_asbinary.md |   68 +
 .../sql-functions/spatial-functions/st_astext.md   |    0
 .../sql-functions/spatial-functions/st_azimuth.md  |   95 +
 .../sql-functions/spatial-functions/st_circle.md   |    0
 .../sql-functions/spatial-functions/st_contains.md |    0
 .../spatial-functions/st_distance_sphere.md        |    0
 .../spatial-functions/st_geometryfromtext.md       |    0
 .../spatial-functions/st_geometryfromwkb.md        |   82 +
 .../spatial-functions/st_linefromtext.md           |    0
 .../sql-functions/spatial-functions/st_point.md    |    0
 .../sql-functions/spatial-functions/st_polygon.md  |   48 +
 .../sql-functions/spatial-functions/st_x.md        |    0
 .../sql-functions/spatial-functions/st_y.md        |    0
 .../append_trailing_char_if_absent.md              |    0
 .../sql-functions/string-functions/ascii.md        |    0
 .../sql-functions/string-functions/bit_length.md   |    0
 .../sql-functions/string-functions/char.md         |   69 +
 .../sql-functions/string-functions/char_length.md  |    0
 .../sql-functions/string-functions/concat.md       |    0
 .../sql-functions/string-functions/concat_ws.md    |   86 +
 .../sql-functions/string-functions/convert_to.md   |   73 +
 .../sql-functions/string-functions/elt.md          |   62 +
 .../sql-functions/string-functions/ends_with.md    |   54 +
 .../sql-functions/string-functions/esquery.md      |   73 +
 .../string-functions/extract_url_parameter.md      |   52 +
 .../sql-functions/string-functions/field.md        |   74 +
 .../sql-functions/string-functions/find_in_set.md  |    0
 .../sql-functions/string-functions/from_base64.md  |   54 +
 .../sql-functions/string-functions/hex.md          |    0
 .../sql-functions/string-functions/initcap.md      |   47 +
 .../sql-functions/string-functions/instr.md        |    0
 .../sql-functions/string-functions/lcase.md        |   36 +
 .../sql-functions/string-functions/left.md         |   47 +
 .../sql-functions/string-functions/length.md       |    0
 .../sql-functions/string-functions/like/like.md    |    0
 .../string-functions/like/not_like.md              |    0
 .../sql-functions/string-functions/locate.md       |    0
 .../sql-functions/string-functions/lower.md        |   47 +
 .../sql-functions/string-functions/lpad.md         |    0
 .../sql-functions/string-functions/ltrim.md        |   54 +
 .../sql-functions/string-functions/mask/mask.md    |   67 +
 .../string-functions/mask/mask_first_n.md          |   58 +
 .../string-functions/mask/mask_last_n.md           |   58 +
 .../sql-functions/string-functions/money_format.md |    0
 .../string-functions/not_null_or_empty.md          |   60 +
 .../string-functions/null_or_empty.md              |   60 +
 .../sql-functions/string-functions/parse_url.md    |   50 +
 .../string-functions/regexp/not_regexp.md          |    0
 .../string-functions/regexp/regexp.md              |    0
 .../string-functions/regexp/regexp_extract.md      |   54 +
 .../string-functions/regexp/regexp_extract_all.md  |   61 +
 .../string-functions/regexp/regexp_replace.md      |    0
 .../string-functions/regexp/regexp_replace_one.md  |   54 +
 .../sql-functions/string-functions/repeat.md       |    0
 .../sql-functions/string-functions/replace.md      |   46 +
 .../sql-functions/string-functions/reverse.md      |   88 +
 .../sql-functions/string-functions/right.md        |   47 +
 .../sql-functions/string-functions/rpad.md         |    0
 .../sql-functions/string-functions/rtrim.md        |   54 +
 .../string-functions/search/multi_match_any.md     |   54 +
 .../search/multi_search_all_positions.md           |   54 +
 .../sql-functions/string-functions/sleep.md        |   48 +
 .../sql-functions/string-functions/space.md        |   55 +
 .../string-functions/split_by_string.md            |  114 +
 .../sql-functions/string-functions/split_part.md   |  100 +
 .../sql-functions/string-functions/starts_with.md  |   54 +
 .../sql-functions/string-functions/strleft.md      |   47 +
 .../sql-functions/string-functions/strright.md     |   48 +
 .../sql-functions/string-functions/sub_replace.md  |   53 +
 .../sql-functions/string-functions/substr.md       |   50 +
 .../sql-functions/string-functions/substring.md    |   85 +
 .../string-functions/substring_index.md            |   92 +
 .../sql-functions/string-functions/to_base64.md    |   54 +
 .../sql-functions/string-functions/trim.md         |   54 +
 .../sql-functions/string-functions/ucase.md        |   37 +
 .../sql-functions/string-functions/unhex.md        |    0
 .../sql-functions/string-functions/upper.md        |   47 +
 .../sql-functions/string-functions/uuid.md         |   56 +
 .../sql-functions/table-functions/backends.md      |  120 +
 .../table-functions/explode-bitmap.md              |  155 ++
 .../table-functions/explode-json-array.md          |  283 ++
 .../table-functions/explode-numbers.md             |   54 +
 .../sql-functions/table-functions/explode-split.md |  115 +
 .../sql-functions/table-functions/explode.md       |   85 +
 .../sql-functions/table-functions/hdfs.md          |  121 +
 .../sql-functions/table-functions/iceberg_meta.md  |  103 +
 .../sql-functions/table-functions/numbers.md       |   69 +
 .../table-functions/outer-combinator.md            |   51 +
 .../table-functions/resource-group.md              |   73 +
 .../sql-manual/sql-functions/table-functions/s3.md |  481 ++++
 .../sql-manual/sql-functions/width-bucket.md       |  152 ++
 .../window-functions/WINDOW-FUNCTION-AVG.md        |    0
 .../window-functions/WINDOW-FUNCTION-COUNT.md      |    0
 .../window-functions/WINDOW-FUNCTION-DENSE-RANK.md |    0
 .../WINDOW-FUNCTION-FIRST-VALUE.md                 |    0
 .../window-functions/WINDOW-FUNCTION-LAG.md        |    0
 .../window-functions/WINDOW-FUNCTION-LAST-VALUE.md |    0
 .../window-functions/WINDOW-FUNCTION-LEAD.md       |   51 +
 .../window-functions/WINDOW-FUNCTION-MAX.md        |    0
 .../window-functions/WINDOW-FUNCTION-MIN.md        |    0
 .../window-functions/WINDOW-FUNCTION-NTILE.md      |    0
 .../window-functions/WINDOW-FUNCTION-RANK.md       |    0
 .../window-functions/WINDOW-FUNCTION-ROW-NUMBER.md |    0
 .../window-functions/WINDOW-FUNCTION-SUM.md        |    0
 .../WINDOW-FUNCTION-WINDOW-FUNNEL.md               |    0
 .../window-functions/WINDOW-FUNCTION.md            |    0
 .../Account-Management-Statements/ALTER-USER.md    |   99 +
 .../Account-Management-Statements/CREATE-ROLE.md   |    0
 .../Account-Management-Statements/CREATE-USER.md   |  132 +
 .../Account-Management-Statements/DROP-ROLE.md     |   52 +
 .../Account-Management-Statements/DROP-USER.md     |    0
 .../Account-Management-Statements/GRANT.md         |  146 ++
 .../Account-Management-Statements/LDAP.md          |   55 +
 .../Account-Management-Statements/REVOKE.md        |   84 +
 .../Account-Management-Statements/SET-PASSWORD.md  |    0
 .../Account-Management-Statements/SET-PROPERTY.md  |  172 ++
 .../ALTER-SYSTEM-ADD-BACKEND.md                    |    0
 .../ALTER-SYSTEM-ADD-BROKER.md                     |    0
 .../ALTER-SYSTEM-ADD-FOLLOWER.md                   |   61 +
 .../ALTER-SYSTEM-ADD-OBSERVER.md                   |   61 +
 .../ALTER-SYSTEM-DECOMMISSION-BACKEND.md           |    0
 .../ALTER-SYSTEM-DROP-BACKEND.md                   |    0
 .../ALTER-SYSTEM-DROP-BROKER.md                    |    0
 .../ALTER-SYSTEM-DROP-FOLLOWER.md                  |   61 +
 .../ALTER-SYSTEM-DROP-OBSERVER.md                  |   61 +
 .../ALTER-SYSTEM-MODIFY-BACKEND.md                 |    0
 .../ALTER-SYSTEM-MODIFY-BROKER.md                  |    0
 .../CANCEL-ALTER-SYSTEM.md                         |    0
 .../Alter/ALTER-CATALOG.md                         |   83 +
 .../Alter/ALTER-DATABASE.md                        |    0
 .../Alter/ALTER-RESOURCE.md                        |   81 +
 .../Alter/ALTER-SQL-BLOCK-RULE.md                  |    0
 .../Alter/ALTER-STORAGE-POLICY.md                  |   60 +
 .../Alter/ALTER-TABLE-BITMAP.md                    |    0
 .../Alter/ALTER-TABLE-COLUMN.md                    |  230 ++
 .../Alter/ALTER-TABLE-COMMENT.md                   |    0
 .../Alter/ALTER-TABLE-PARTITION.md                 |  167 ++
 .../Alter/ALTER-TABLE-PROPERTY.md                  |  283 ++
 .../Alter/ALTER-TABLE-RENAME.md                    |  120 +
 .../Alter/ALTER-TABLE-REPLACE.md                   |   86 +
 .../Alter/ALTER-TABLE-ROLLUP.md                    |  140 +
 .../Data-Definition-Statements/Alter/ALTER-VIEW.md |    0
 .../Alter/CANCEL-ALTER-TABLE.md                    |    0
 .../Backup-and-Restore/BACKUP.md                   |  105 +
 .../Backup-and-Restore/CANCEL-BACKUP.md            |    0
 .../Backup-and-Restore/CANCEL-RESTORE.md           |    0
 .../Backup-and-Restore/CREATE-REPOSITORY.md        |  184 ++
 .../Backup-and-Restore/DROP-REPOSITORY.md          |    0
 .../Backup-and-Restore/RESTORE.md                  |  124 +
 .../Create/CREATE-CATALOG.md                       |  336 +++
 .../Create/CREATE-DATABASE.md                      |    0
 .../Create/CREATE-ENCRYPT-KEY.md                   |    0
 .../Create/CREATE-EXTERNAL-TABLE.md                |    0
 .../Create/CREATE-FILE.md                          |    0
 .../Create/CREATE-FUNCTION.md                      |  171 ++
 .../Create/CREATE-INDEX.md                         |    0
 .../Create/CREATE-MATERIALIZED-VIEW.md             |  235 ++
 .../Create/CREATE-POLICY.md                        |  126 +
 .../Create/CREATE-RESOURCE.md                      |  249 ++
 .../Create/CREATE-SQL-BLOCK-RULE.md                |    0
 .../Create/CREATE-TABLE-AS-SELECT.md               |   89 +
 .../Create/CREATE-TABLE-LIKE.md                    |    0
 .../Create/CREATE-TABLE.md                         |  703 +++++
 .../Create/CREATE-VIEW.md                          |    0
 .../Drop/DROP-CATALOG.md                           |   56 +
 .../Drop/DROP-DATABASE.md                          |   59 +
 .../Drop/DROP-ENCRYPT-KEY.md                       |    0
 .../Data-Definition-Statements/Drop/DROP-FILE.md   |    0
 .../Drop/DROP-FUNCTION.md                          |   66 +
 .../Data-Definition-Statements/Drop/DROP-INDEX.md  |    0
 .../Drop/DROP-MATERIALIZED-VIEW.md                 |    0
 .../Data-Definition-Statements/Drop/DROP-POLICY.md |   75 +
 .../Drop/DROP-RESOURCE.md                          |    0
 .../Drop/DROP-SQL-BLOCK-RULE.md                    |    0
 .../Data-Definition-Statements/Drop/DROP-TABLE.md  |    0
 .../Drop/TRUNCATE-TABLE.md                         |    0
 .../Load/ALTER-ROUTINE-LOAD.md                     |    0
 .../Load/BROKER-LOAD.md                            |  543 ++++
 .../Load/CANCEL-LOAD.md                            |   83 +
 .../Load/CLEAN-LABEL.md                            |   62 +
 .../Load/CLEAN-PROFILE.md                          |   56 +
 .../Load/CREATE-ROUTINE-LOAD.md                    |  563 ++++
 .../Load/CREATE-SYNC-JOB.md                        |  161 ++
 .../Load/MULTI-LOAD.md                             |    0
 .../Load/MYSQL-LOAD.md                             |  171 ++
 .../Load/PAUSE-ROUTINE-LOAD.md                     |    0
 .../Load/PAUSE-SYNC-JOB.md                         |    0
 .../Load/RESUME-ROUTINE-LOAD.md                    |    0
 .../Load/RESUME-SYNC-JOB.md                        |    0
 .../Load/STOP-ROUTINE-LOAD.md                      |    0
 .../Load/STOP-SYNC-JOB.md                          |    0
 .../Load/STREAM-LOAD.md                            |  466 ++++
 .../Manipulation/CANCEL-EXPORT.md                  |   79 +
 .../Manipulation/DELETE.md                         |  182 ++
 .../Manipulation/EXPORT.md                         |  238 ++
 .../Manipulation/INSERT.md                         |  234 ++
 .../Manipulation/SELECT.md                         |  414 +++
 .../Manipulation/UPDATE.md                         |  167 ++
 .../Data-Manipulation-Statements/OUTFILE.md        |  332 +++
 .../sql-manual/sql-reference/Data-Types/ARRAY.md   |   90 +
 .../sql-manual/sql-reference/Data-Types/BIGINT.md  |    0
 .../sql-manual/sql-reference/Data-Types/BITMAP.md  |   72 +
 .../sql-manual/sql-reference/Data-Types/BOOLEAN.md |    0
 .../sql-manual/sql-reference/Data-Types/CHAR.md    |   33 +
 .../sql-manual/sql-reference/Data-Types/DATE.md    |   52 +
 .../sql-reference/Data-Types/DATETIME.md           |   38 +
 .../sql-reference/Data-Types/DATETIMEV2.md         |   47 +
 .../sql-manual/sql-reference/Data-Types/DATEV2.md  |   54 +
 .../sql-manual/sql-reference/Data-Types/DECIMAL.md |   42 +
 .../sql-reference/Data-Types/DECIMALV3.md          |   89 +
 .../sql-manual/sql-reference/Data-Types/DOUBLE.md  |    0
 .../sql-manual/sql-reference/Data-Types/FLOAT.md   |    0
 .../sql-manual/sql-reference/Data-Types/HLL.md     |    0
 .../sql-manual/sql-reference/Data-Types/INT.md     |    0
 .../sql-manual/sql-reference/Data-Types/JSONB.md   |  816 ++++++
 .../sql-reference/Data-Types/LARGEINT.md           |    0
 .../sql-reference/Data-Types/QUANTILE_STATE.md     |   72 +
 .../sql-reference/Data-Types/SMALLINT.md           |    0
 .../sql-manual/sql-reference/Data-Types/STRING.md  |   35 +
 .../sql-manual/sql-reference/Data-Types/TINYINT.md |    0
 .../sql-manual/sql-reference/Data-Types/VARCHAR.md |    0
 .../ADMIN-CANCEL-REBALANCE-DISK.md                 |   62 +
 .../ADMIN-CANCEL-REPAIR.md                         |    0
 .../ADMIN-CHECK-TABLET.md                          |   67 +
 .../ADMIN-CLEAN-TRASH.md                           |    0
 .../ADMIN-COPY-TABLET.md                           |    0
 .../ADMIN-DIAGNOSE-TABLET.md                       |    0
 .../ADMIN-REBALANCE-DISK.md                        |   68 +
 .../ADMIN-REPAIR-TABLE.md                          |    0
 .../ADMIN-SET-CONFIG.md                            |    0
 .../ADMIN-SET-REPLICA-STATUS.md                    |    0
 .../ADMIN-SHOW-CONFIG.md                           |   77 +
 .../ADMIN-SHOW-REPLICA-DISTRIBUTION.md             |    0
 .../ADMIN-SHOW-REPLICA-STATUS.md                   |    0
 .../ADMIN-SHOW-TABLET-STORAGE-FORMAT.md            |    0
 .../ENABLE-FEATURE.md                              |    0
 .../INSTALL-PLUGIN.md                              |   83 +
 .../Database-Administration-Statements/KILL.md     |    0
 .../Database-Administration-Statements/RECOVER.md  |  163 ++
 .../SET-VARIABLE.md                                |   91 +
 .../UNINSTALL-PLUGIN.md                            |    0
 .../sql-manual/sql-reference/Operators/in.md       |   86 +
 .../SHOW-ALTER-TABLE-MATERIALIZED-VIEW.md          |  120 +
 .../sql-reference/Show-Statements/SHOW-ALTER.md    |    0
 .../sql-reference/Show-Statements/SHOW-BACKENDS.md |   65 +
 .../sql-reference/Show-Statements/SHOW-BACKUP.md   |    0
 .../sql-reference/Show-Statements/SHOW-BROKER.md   |    0
 .../Show-Statements/SHOW-CATALOG-RECYCLE-BIN.md    |   74 +
 .../sql-reference/Show-Statements/SHOW-CATALOGS.md |   85 +
 .../sql-reference/Show-Statements/SHOW-CHARSET.md  |    0
 .../Show-Statements/SHOW-COLLATION.md              |    0
 .../sql-reference/Show-Statements/SHOW-COLUMNS.md  |   56 +
 .../Show-Statements/SHOW-CREATE-CATALOG.md         |   63 +
 .../Show-Statements/SHOW-CREATE-DATABASE.md        |    0
 .../Show-Statements/SHOW-CREATE-FUNCTION.md        |   69 +
 .../Show-Statements/SHOW-CREATE-LOAD.md            |   60 +
 .../SHOW-CREATE-MATERIALIZED-VIEW.md               |    0
 .../Show-Statements/SHOW-CREATE-REPOSITORY.md      |   59 +
 .../Show-Statements/SHOW-CREATE-ROUTINE-LOAD.md    |    0
 .../Show-Statements/SHOW-CREATE-TABLE.md           |    0
 .../Show-Statements/SHOW-DATA-SKEW.md              |   56 +
 .../Show-Statements/SHOW-DATA-TYPES.md             |   52 +
 .../sql-reference/Show-Statements/SHOW-DATA.md     |    0
 .../Show-Statements/SHOW-DATABASE-ID.md            |    0
 .../Show-Statements/SHOW-DATABASES.md              |   99 +
 .../sql-reference/Show-Statements/SHOW-DELETE.md   |    0
 .../Show-Statements/SHOW-DYNAMIC-PARTITION.md      |    0
 .../Show-Statements/SHOW-ENCRYPT-KEY.md            |    0
 .../sql-reference/Show-Statements/SHOW-ENGINES.md  |    0
 .../sql-reference/Show-Statements/SHOW-EVENTS.md   |    0
 .../sql-reference/Show-Statements/SHOW-EXPORT.md   |    0
 .../sql-reference/Show-Statements/SHOW-FILE.md     |    0
 .../Show-Statements/SHOW-FRONTENDS.md              |   61 +
 .../Show-Statements/SHOW-FUNCTIONS.md              |  132 +
 .../sql-reference/Show-Statements/SHOW-GRANTS.md   |    0
 .../sql-reference/Show-Statements/SHOW-INDEX.md    |    0
 .../Show-Statements/SHOW-LAST-INSERT.md            |    0
 .../Show-Statements/SHOW-LOAD-PROFILE.md           |  231 ++
 .../Show-Statements/SHOW-LOAD-WARNINGS.md          |    0
 .../sql-reference/Show-Statements/SHOW-LOAD.md     |    0
 .../Show-Statements/SHOW-MIGRATIONS.md             |    0
 .../Show-Statements/SHOW-OPEN-TABLES.md            |    0
 .../Show-Statements/SHOW-PARTITION-ID.md           |    0
 .../Show-Statements/SHOW-PARTITIONS.md             |    0
 .../sql-reference/Show-Statements/SHOW-PLUGINS.md  |    0
 .../sql-reference/Show-Statements/SHOW-POLICY.md   |   99 +
 .../sql-reference/Show-Statements/SHOW-PROC.md     |  243 ++
 .../Show-Statements/SHOW-PROCEDURE.md              |    0
 .../Show-Statements/SHOW-PROCESSLIST.md            |   77 +
 .../sql-reference/Show-Statements/SHOW-PROPERTY.md |   83 +
 .../Show-Statements/SHOW-QUERY-PROFILE.md          |  222 ++
 .../Show-Statements/SHOW-REPOSITORIES.md           |    0
 .../Show-Statements/SHOW-RESOURCES.md              |    0
 .../sql-reference/Show-Statements/SHOW-RESTORE.md  |    0
 .../sql-reference/Show-Statements/SHOW-ROLES.md    |    0
 .../Show-Statements/SHOW-ROUTINE-LOAD-TASK.md      |    0
 .../Show-Statements/SHOW-ROUTINE-LOAD.md           |    0
 .../Show-Statements/SHOW-SMALL-FILES.md            |    0
 .../sql-reference/Show-Statements/SHOW-SNAPSHOT.md |    0
 .../Show-Statements/SHOW-SQL-BLOCK-RULE.md         |    0
 .../sql-reference/Show-Statements/SHOW-STATUS.md   |  114 +
 .../Show-Statements/SHOW-STREAM-LOAD.md            |  100 +
 .../sql-reference/Show-Statements/SHOW-SYNC-JOB.md |    0
 .../sql-reference/Show-Statements/SHOW-TABLE-ID.md |    0
 .../Show-Statements/SHOW-TABLE-STATUS.md           |    0
 .../sql-reference/Show-Statements/SHOW-TABLES.md   |   83 +
 .../sql-reference/Show-Statements/SHOW-TABLET.md   |    0
 .../sql-reference/Show-Statements/SHOW-TABLETS.md  |   83 +
 .../Show-Statements/SHOW-TRANSACTION.md            |    0
 .../sql-reference/Show-Statements/SHOW-TRASH.md    |    0
 .../sql-reference/Show-Statements/SHOW-TRIGGERS.md |    0
 .../sql-reference/Show-Statements/SHOW-TYPECAST.md |   71 +
 .../Show-Statements/SHOW-VARIABLES.md              |   76 +
 .../sql-reference/Show-Statements/SHOW-VIEW.md     |    0
 .../sql-reference/Show-Statements/SHOW-WARNING.md  |    0
 .../Show-Statements/SHOW-WHITE-LIST.md             |    0
 .../sql-reference/Utility-Statements/DESCRIBE.md   |    0
 .../sql-reference/Utility-Statements/HELP.md       |    0
 .../sql-reference/Utility-Statements/REFRESH.md    |   81 +
 .../sql-reference/Utility-Statements/SWITCH.md     |   60 +
 .../sql-reference/Utility-Statements/SYNC.md       |   56 +
 .../sql-reference/Utility-Statements/USE.md        |   66 +
 .../version-1.2/summary/basic-summary.md           |   93 +
 versioned_sidebars/version-0.15-sidebars.json      |  575 -----
 versioned_sidebars/version-1.2-sidebars.json       | 1240 +++++++++
 versions.json                                      |    3 +-
 3248 files changed, 143721 insertions(+), 201823 deletions(-)

diff --git a/.github/workflows/cron-deploy-website.yml b/.github/workflows/cron-deploy-website.yml
index 3ae4a6d53e0..24c2879e5cc 100644
--- a/.github/workflows/cron-deploy-website.yml
+++ b/.github/workflows/cron-deploy-website.yml
@@ -36,12 +36,10 @@ jobs:
       run: |
         git clone https://github.com/apache/doris.git
         export BRANCH=master
-        mkdir versioned_docs/version-dev/
-        cp -R doris/docs/en/docs/* versioned_docs/version-dev/
-        cp -R doris/docs/sidebars.json versioned_sidebars/version-dev-sidebars.json
-        mkdir i18n/zh-CN/docusaurus-plugin-content-docs/version-dev
-        cp -R doris/docs/zh-CN/docs/* i18n/zh-CN/docusaurus-plugin-content-docs/version-dev/
-        cp -R doris/docs/dev.json i18n/zh-CN/docusaurus-plugin-content-docs/version-dev.json
+        cp -R doris/docs/en/docs/* docs/
+        cp -R doris/docs/sidebars.json sidebars.json
+        cp -R doris/docs/zh-CN/docs/* i18n/zh-CN/docusaurus-plugin-content-docs/current/
+        cp -R doris/docs/dev.json i18n/zh-CN/docusaurus-plugin-content-docs/current.json
 
         mkdir -p community
         cp -R doris/docs/en/community/* community/
diff --git a/.github/workflows/manual-deploy-website.yml b/.github/workflows/manual-deploy-website.yml
index 297e6ec595f..7b04867656c 100644
--- a/.github/workflows/manual-deploy-website.yml
+++ b/.github/workflows/manual-deploy-website.yml
@@ -39,12 +39,10 @@ jobs:
     - name: Build
       run: |
         git clone https://github.com/apache/doris.git
-        mkdir versioned_docs/version-dev/
-        cp -R doris/docs/en/docs/* versioned_docs/version-dev/
-        cp -R doris/docs/sidebars.json versioned_sidebars/version-dev-sidebars.json
-        mkdir i18n/zh-CN/docusaurus-plugin-content-docs/version-dev
-        cp -R doris/docs/zh-CN/docs/* i18n/zh-CN/docusaurus-plugin-content-docs/version-dev/
-        cp -R doris/docs/dev.json i18n/zh-CN/docusaurus-plugin-content-docs/version-dev.json
+        cp -R doris/docs/en/docs/* docs/
+        cp -R doris/docs/sidebars.json sidebars.json
+        cp -R doris/docs/zh-CN/docs/* i18n/zh-CN/docusaurus-plugin-content-docs/current/
+        cp -R doris/docs/dev.json i18n/zh-CN/docusaurus-plugin-content-docs/current.json
 
         mkdir -p community
         cp -R doris/docs/en/community/* community/
diff --git a/.github/workflows/manual-deploy.yml b/.github/workflows/manual-deploy.yml
deleted file mode 100644
index e6afca51ab1..00000000000
--- a/.github/workflows/manual-deploy.yml
+++ /dev/null
@@ -1,85 +0,0 @@
-name: Manual Deploy (Deprecated)
-
-on: 
-  workflow_dispatch:
-    inputs:
-      branch:
-        description: 'Specify the branch name'
-        required: true
-        default: 'master'
-
-jobs:
-  build-and-deploy:
-    runs-on: ubuntu-latest
-    environment: Production
-    steps:
-    - name: Checkout
-      uses: actions/checkout@master
-      with:
-          persist-credentials: false
-          submodules: recursive
-
-    - name: Use Node.js
-      uses: actions/setup-node@v1
-      with:
-        node-version: 16.14.0
-
-    - name: Build
-      run: |
-        git clone https://github.com/apache/doris.git
-        mkdir versioned_docs/version-dev/
-        cp -R doris/docs/en/docs/* versioned_docs/version-dev/
-        cp -R doris/docs/sidebars.json versioned_sidebars/version-dev-sidebars.json
-        mkdir i18n/zh-CN/docusaurus-plugin-content-docs/version-dev
-        cp -R doris/docs/zh-CN/docs/* i18n/zh-CN/docusaurus-plugin-content-docs/version-dev/
-        cp -R doris/docs/dev.json i18n/zh-CN/docusaurus-plugin-content-docs/version-dev.json
-
-        mkdir -p community
-        cp -R doris/docs/en/community/* community/
-        mkdir -p i18n/zh-CN/docusaurus-plugin-content-docs-community/current/
-        cp -R doris/docs/zh-CN/community/* i18n/zh-CN/docusaurus-plugin-content-docs-community/current/
-        cp -R doris/docs/sidebarsCommunity.json .
-
-        cp -R doris/docs/images static/
-        npm install -g yarn
-        yarn cache clean
-        yarn && yarn build
-        touch build/.dummy
-        cp .asf-site.yaml ./build/.asf.yaml
-        cp versions.json ./build/
-        ls build
-        export DORIS_COMMIT=`git rev-parse HEAD`
-
-#     - name: Upload files to OSS
-#       uses: ./.github/actions/aliyun-oss-website-action
-#       with:
-#           accessKeyId: ${{ secrets.ALIYUN_ACCESS_KEY_ID }}
-#           accessKeySecret: ${{ secrets.ALIYUN_ACCESS_KEY_SECRET }}
-#           bucket: ${{ secrets.ALIYUN_OSS_BUCKET }}
-#           # use your own endpoint
-#           endpoint: ${{ secrets.ALIYUN_OSS_ENDPOINT }}
-#           folder: build
-
-    - name: Deploy Website
-      if: ${{ github.event.inputs.branch == 'master' }}
-      uses: peaceiris/actions-gh-pages@v3
-      with:
-        github_token: ${{ github.token }}
-        publish_branch: asf-site
-        publish_dir: ./build
-        destination_dir: ./
-        user_name: 'github-actions[bot]'
-        user_email: 'github-actions[bot]@users.noreply.github.com'
-        commit_message: 'Automated deployment with doris branch ${{ github.event.inputs.branch }}@${{ env.DORIS_COMMIT }}'
-
-    - name: Deploy Branch
-      if: ${{ github.event.inputs.branch != 'master' }}
-      uses: peaceiris/actions-gh-pages@v3
-      with:
-        github_token: ${{ secrets.GITHUB_TOKEN }}
-        publish_branch: asf-site
-        publish_dir: ./build
-        destination_dir: ${{ github.event.inputs.branch }}
-        user_name: 'github-actions[bot]'
-        user_email: 'github-actions[bot]@users.noreply.github.com'
-        commit_message: 'Automated deployment with doris branch ${{ github.event.inputs.branch }}@${{ env.DORIS_COMMIT }}'
diff --git a/dev.sh b/dev.sh
new file mode 100644
index 00000000000..6a48e12009b
--- /dev/null
+++ b/dev.sh
@@ -0,0 +1,63 @@
+
+
+#!/usr/bin/env bash
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+
+##############################################################
+# Copy the dev docs and community from doris repository before run
+# Move the dev docs and community before commit
+##############################################################
+
+#!/bin/bash
+
+set -eo pipefail
+
+if [ $1 == move-docs ]
+then
+    rm -rf docs/*
+    rm -rf sidebars.json
+    rm -rf i18n/zh-CN/docusaurus-plugin-content-docs/current/*
+    rm -rf i18n/zh-CN/docusaurus-plugin-content-docs/current.json
+    rm -rf community
+    rm -rf i18n/zh-CN/docusaurus-plugin-content-docs-community/current/
+    rm -rf sidebarsCommunity.json
+
+    echo "***************************************"
+    echo "Docs move success"
+    echo "***************************************"
+else
+    git clone https://github.com/apache/doris.git --depth 1
+    cp -R doris/docs/en/docs/* docs/
+    cp -R doris/docs/sidebars.json sidebars.json
+    cp -R doris/docs/zh-CN/docs/* i18n/zh-CN/docusaurus-plugin-content-docs/current/
+    cp -R doris/docs/dev.json i18n/zh-CN/docusaurus-plugin-content-docs/current.json
+
+    mkdir -p community
+    cp -R doris/docs/en/community/* community/
+    mkdir -p i18n/zh-CN/docusaurus-plugin-content-docs-community/current/
+    cp -R doris/docs/zh-CN/community/* i18n/zh-CN/docusaurus-plugin-content-docs-community/current/
+    cp -R doris/docs/sidebarsCommunity.json .
+
+    cp -R doris/docs/images static/
+
+    rm -rf doris
+
+    echo "***************************************"
+    echo "Docs copy success"
+    echo "***************************************"
+fi
\ No newline at end of file
diff --git a/docs/admin-manual/cluster-management/elastic-expansion.md b/docs/admin-manual/cluster-management/elastic-expansion.md
deleted file mode 100644
index b10b7f57c68..00000000000
--- a/docs/admin-manual/cluster-management/elastic-expansion.md
+++ /dev/null
@@ -1,153 +0,0 @@
----
-{
-    "title": "Elastic scaling",
-    "language": "en"
-}
-
----
-
-<!--
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Elastic scaling
-
-Doris can easily expand and shrink FE, BE, Broker instances.
-
-## FE Expansion and Compression
-
-High availability of FE can be achieved by expanding FE to three top-one nodes.
-
-Users can login to Master FE through MySQL client. By:
-
-`SHOW PROC '/frontends';`
-
-To view the current FE node situation.
-
-You can also view the FE node through the front-end page connection: ``http://fe_hostname:fe_http_port/frontend`` or ```http://fe_hostname:fe_http_port/system?Path=//frontends```.
-
-All of the above methods require Doris's root user rights.
-
-The process of FE node expansion and contraction does not affect the current system operation.
-
-### Adding FE nodes
-
-FE is divided into three roles: Leader, Follower and Observer. By default, a cluster can have only one Leader and multiple Followers and Observers. Leader and Follower form a Paxos selection group. If the Leader goes down, the remaining Followers will automatically select a new Leader to ensure high write availability. Observer synchronizes Leader data, but does not participate in the election. If only one FE is deployed, FE defaults to Leader.
-
-The first FE to start automatically becomes Leader. On this basis, several Followers and Observers can be added.
-
-#### Configure and start Follower or Observer.
-
- Follower and Observer are configured with Leader. The following commands need to be executed at the first startup:
-
-`bin/start_fe.sh --helper host:edit_log_port --daemon`
-
-The host is the node IP of Leader, and the edit\_log\_port in Lead's configuration file fe.conf. The --helper is only required when follower/observer is first startup.
-
-#### Add Follower or Observer to the cluster
-
-Add Follower or Observer. Connect to the started FE using mysql-client and execute:
-
-`ALTER SYSTEM ADD FOLLOWER "follower_host:edit_log_port";`
-
-or
-
-`ALTER SYSTEM ADD OBSERVER "observer_host:edit_log_port";`
-
-The follower\_host and observer\_host is the node IP of Follower or Observer, and the edit\_log\_port in its configuration file fe.conf.
-
-View the status of Follower or Observer. Connect to any booted FE using mysql-client and execute:
-
-```SHOW PROC '/frontends';```
-
-You can view the FE currently joined the cluster and its corresponding roles.
-
-> Notes for FE expansion:
->
-> 1. The number of Follower FEs (including Leaders) must be odd. It is recommended that a maximum of three constituent high availability (HA) modes be deployed.
-> 2. When FE is in a highly available deployment (1 Leader, 2 Follower), we recommend that the reading service capability of FE be extended by adding Observer FE. Of course, you can continue to add Follower FE, but it's almost unnecessary.
-> 3. Usually a FE node can handle 10-20 BE nodes. It is suggested that the total number of FE nodes should be less than 10. Usually three can meet most of the needs.
-> 4. The helper cannot point to the FE itself, it must point to one or more existing running Master/Follower FEs.
-
-### Delete FE nodes
-
-Delete the corresponding FE node using the following command:
-
-```ALTER SYSTEM DROP FOLLOWER[OBSERVER] "fe_host:edit_log_port";```
-
-> Notes for FE contraction:
->
-> 1. When deleting Follower FE, make sure that the remaining Follower (including Leader) nodes are odd.
-
-## BE Expansion and Compression
-
-Users can login to Leader FE through mysql-client. By:
-
-```SHOW PROC '/backends';```
-
-To see the current BE node situation.
-
-You can also view the BE node through the front-end page connection: ``http://fe_hostname:fe_http_port/backend`` or ``http://fe_hostname:fe_http_port/system?Path=//backends``.
-
-All of the above methods require Doris's root user rights.
-
-The expansion and scaling process of BE nodes does not affect the current system operation and the tasks being performed, and does not affect the performance of the current system. Data balancing is done automatically. Depending on the amount of data available in the cluster, the cluster will be restored to load balancing in a few hours to a day. For cluster load, see the [Tablet Load Balancing Document](../../maint-monitor/tablet-repair-and-balance).
-
-### Add BE nodes
-
-The BE node is added in the same way as in the **BE deployment** section. The BE node is added by the `ALTER SYSTEM ADD BACKEND` command.
-
-> Notes for BE expansion:
->
-> 1. After BE expansion, Doris will automatically balance the data according to the load, without affecting the use during the period.
-
-### Delete BE nodes
-
-There are two ways to delete BE nodes: DROP and DECOMMISSION
-
-The DROP statement is as follows:
-
-```ALTER SYSTEM DROP BACKEND "be_host:be_heartbeat_service_port";```
-
-**Note: DROP BACKEND will delete the BE directly and the data on it will not be recovered!!! So we strongly do not recommend DROP BACKEND to delete BE nodes. When you use this statement, there will be corresponding error-proof operation hints.**
-
-DECOMMISSION clause:
-
-```ALTER SYSTEM DECOMMISSION BACKEND "be_host:be_heartbeat_service_port";```
-
-> DECOMMISSION notes:
->
-> 1. This command is used to safely delete BE nodes. After the command is issued, Doris attempts to migrate the data on the BE to other BE nodes, and when all data is migrated, Doris automatically deletes the node.
-> 2. The command is an asynchronous operation. After execution, you can see that the BE node's `SystemDecommissioned` status is true through ``SHOW PROC '/backends';` Indicates that the node is offline.
-> 3. The order **does not necessarily carry out successfully**. For example, when the remaining BE storage space is insufficient to accommodate the data on the offline BE, or when the number of remaining machines does not meet the minimum number of replicas, the command cannot be completed, and the BE will always be in the state of `SystemDecommissioned` as true.
-> 4. The progress of DECOMMISSION can be viewed through `SHOW PROC '/backends';` Tablet Num, and if it is in progress, Tablet Num will continue to decrease.
-> 5. The operation can be carried out by:
-> 		```CANCEL ALTER SYSTEM DECOMMISSION BACKEND "be_host:be_heartbeat_service_port";```
-> 	The order was cancelled. When cancelled, the data on the BE will maintain the current amount of data remaining. Follow-up Doris re-load balancing
-
-**For expansion and scaling of BE nodes in multi-tenant deployment environments, please refer to the [Multi-tenant Design Document](../../multi-tenant).**
-
-## Broker Expansion and Shrinkage
-
-There is no rigid requirement for the number of Broker instances. Usually one physical machine is deployed. Broker addition and deletion can be accomplished by following commands:
-
-```ALTER SYSTEM ADD BROKER broker_name "broker_host:broker_ipc_port";```
-```ALTER SYSTEM DROP BROKER broker_name "broker_host:broker_ipc_port";```
-```ALTER SYSTEM DROP ALL BROKER broker_name;```
-
-Broker is a stateless process that can be started or stopped at will. Of course, when it stops, the job running on it will fail. Just try again.
diff --git a/docs/admin-manual/cluster-management/load-balancing.md b/docs/admin-manual/cluster-management/load-balancing.md
deleted file mode 100644
index e9d8b1980f4..00000000000
--- a/docs/admin-manual/cluster-management/load-balancing.md
+++ /dev/null
@@ -1,636 +0,0 @@
----
-{
-    "title": "load balancing",
-    "language": "en"
-}
-
----
-
-<!--
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# load balancing
-
-When deploying multiple FE nodes, users can deploy a load balancing layer on top of multiple FEs to achieve high availability of Doris.
-
-## Code method
-
-Retry and load balance yourself in the application layer code. For example, if a connection is found to be down, it will automatically retry on other connections. Application layer code retry requires the application to configure multiple doris front-end node addresses.
-
-## JDBC Connector
-
-If you use mysql jdbc connector to connect to Doris, you can use jdbc's automatic retry mechanism:
-
-```text
-jdbc:mysql:loadbalance://[host:port],[host:port].../[database][?propertyName1][=propertyValue1][&propertyName2][=propertyValue
-```
-
-For details, please refer to [Mysql official website document](https://dev.mysql.com/doc/connector-j/5.1/en/connector-j-usagenotes-j2ee-concepts-managing-load-balanced-connections.html)
-
-## ProxySQL method
-
-ProxySQL is a flexible and powerful MySQL proxy layer. It is a MySQL middleware that can be actually used in a production environment. It can realize read-write separation, support Query routing function, support dynamic designation of a certain SQL for cache, support dynamic loading configuration, failure Switching and some SQL filtering functions.
-
-Doris's FE process is responsible for receiving user connections and query requests. It itself is horizontally scalable and highly available, but it requires users to set up a proxy on multiple FEs to achieve automatic connection load balancing.
-
-### Install ProxySQL (yum way)
-
-```shell
- Configure yum source
-# vim /etc/yum.repos.d/proxysql.repo
-[proxysql_repo]
-name= ProxySQL YUM repository
-baseurl=http://repo.proxysql.com/ProxySQL/proxysql-1.4.x/centos/\$releasever
-gpgcheck=1
-gpgkey=http://repo.proxysql.com/ProxySQL/repo_pub_key
- 
-Perform installation
-# yum clean all
-# yum makecache
-# yum -y install proxysql
-View version  
-# proxysql --version
-ProxySQL version 1.4.13-15-g69d4207, codename Truls
-Set up auto start
-# systemctl enable proxysql
-# systemctl start proxysql      
-# systemctl status proxysql
-After startup, it will listen to two ports, the default is 6032 and 6033. Port 6032 is the management port of ProxySQL, and 6033 is the port for ProxySQL to provide external services (that is, the forwarding port connected to the real database of the forwarding backend).
-# netstat -tunlp
-Active Internet connections (only servers)
-Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name  
-tcp        0      0 0.0.0.0:6032            0.0.0.0:*               LISTEN      23940/proxysql    
-tcp        0      0 0.0.0.0:6033            0.0.0.0:*               LISTEN
-```
-
-### ProxySQL Config
-
-ProxySQL has a configuration file `/etc/proxysql.cnf` and a configuration database file `/var/lib/proxysql/proxysql.db`. **Special attention is needed here**: If there is a `"proxysql.db"` file (under the `/var/lib/proxysql` directory), the ProxySQL service will only be read when it is started for the first time The `proxysql.cnf file` and parse it; after startup, the `proxysql.cnf` file will not be read! If you want the configuration in the proxysql.cnf file to take effect after restart [...]
-
-#### View and modify configuration files
-
-Here are mainly a few parameters, which have been commented out below, and you can modify them according to your needs
-
-```sql
-# egrep -v "^#|^$" /etc/proxysql.cnf
-datadir="/var/lib/proxysql"         #data dir
-admin_variables=
-{
-        admin_credentials="admin:admin"  #User name and password for connecting to the management terminal
-        mysql_ifaces="0.0.0.0:6032"    #Management port, used to connect to proxysql management database
-}
-mysql_variables=
-{
-        threads=4      #Specify the number of threads opened for the forwarding port
-        max_connections=2048
-        default_query_delay=0
-        default_query_timeout=36000000
-        have_compress=true
-        poll_timeout=2000
-        interfaces="0.0.0.0:6033"    #Specify the forwarding port, used to connect to the back-end mysql database, which is equivalent to acting as a proxy
-        default_schema="information_schema"
-        stacksize=1048576
-        server_version="5.5.30"        #Specify the version of the backend mysql
-        connect_timeout_server=3000
-        monitor_username="monitor"
-        monitor_password="monitor"
-        monitor_history=600000
-        monitor_connect_interval=60000
-        monitor_ping_interval=10000
-        monitor_read_only_interval=1500
-        monitor_read_only_timeout=500
-        ping_interval_server_msec=120000
-        ping_timeout_server=500
-        commands_stats=true
-        sessions_sort=true
-        connect_retries_on_failure=10
-}
-mysql_servers =
-(
-)
-mysql_users:
-(
-)
-mysql_query_rules:
-(
-)
-scheduler=
-(
-)
-mysql_replication_hostgroups=
-(
-)
-```
-
-#### Connect to the ProxySQL management port test
-
-```sql
-# mysql -uadmin -padmin -P6032 -hdoris01
-View the global_variables table information of the main library (it is in this library after login by default)
-MySQL [(none)]> show databases;
-+-----+---------------+-------------------------------------+
-| seq | name          | file                                |
-+-----+---------------+-------------------------------------+
-| 0   | main          |                                     |
-| 2   | disk          | /var/lib/proxysql/proxysql.db       |
-| 3   | stats         |                                     |
-| 4   | monitor       |                                     |
-| 5   | stats_history | /var/lib/proxysql/proxysql_stats.db |
-+-----+---------------+-------------------------------------+
-5 rows in set (0.000 sec)
-MySQL [(none)]> use main;
-Reading table information for completion of table and column names
-You can turn off this feature to get a quicker startup with -A
- 
-Database changed
-MySQL [main]> show tables;
-+--------------------------------------------+
-| tables                                     |
-+--------------------------------------------+
-| global_variables                           |
-| mysql_collations                           |
-| mysql_group_replication_hostgroups         |
-| mysql_query_rules                          |
-| mysql_query_rules_fast_routing             |
-| mysql_replication_hostgroups               |
-| mysql_servers                              |
-| mysql_users                                |
-| proxysql_servers                           |
-| runtime_checksums_values                   |
-| runtime_global_variables                   |
-| runtime_mysql_group_replication_hostgroups |
-| runtime_mysql_query_rules                  |
-| runtime_mysql_query_rules_fast_routing     |
-| runtime_mysql_replication_hostgroups       |
-| runtime_mysql_servers                      |
-| runtime_mysql_users                        |
-| runtime_proxysql_servers                   |
-| runtime_scheduler                          |
-| scheduler                                  |
-+--------------------------------------------+
-20 rows in set (0.000 sec)
-```
-
-#### ProxySQL configuration backend Doris FE
-
-Use the insert statement to add the host to the mysql_servers table, where: hostgroup_id is 10 for the write group, and 20 for the read group. We don't need to read and write the license here, and it doesn't matter which one can be set randomly.
-
-```sql
-[root@mysql-proxy ~]# mysql -uadmin -padmin -P6032 -h127.0.0.1
-............
-MySQL [(none)]> insert into mysql_servers(hostgroup_id,hostname,port) values(10,'192.168.9.211',9030);
-Query OK, 1 row affected (0.000 sec)
-  
-MySQL [(none)]> insert into mysql_servers(hostgroup_id,hostname,port) values(10,'192.168.9.212',9030);
-Query OK, 1 row affected (0.000 sec)
-  
-MySQL [(none)]> insert into mysql_servers(hostgroup_id,hostname,port) values(10,'192.168.9.213',9030);
-Query OK, 1 row affected (0.000 sec)
- 
-If an error occurs during the insertion process:
-ERROR 1045 (#2800): UNIQUE constraint failed: mysql_servers.hostgroup_id, mysql_servers.hostname, mysql_servers.port
- 
-It means that other configurations may have been defined before, you can clear this table or delete the configuration of the corresponding host
-MySQL [(none)]> select * from mysql_servers;
-MySQL [(none)]> delete from mysql_servers;
-Query OK, 6 rows affected (0.000 sec)
-
-Check whether these 3 nodes are inserted successfully and their status.
-MySQL [(none)]> select * from mysql_servers\G;
-*************************** 1. row ***************************
-       hostgroup_id: 10
-           hostname: 192.168.9.211
-               port: 9030
-             status: ONLINE
-             weight: 1
-        compression: 0
-    max_connections: 1000
-max_replication_lag: 0
-            use_ssl: 0
-     max_latency_ms: 0
-            comment:
-*************************** 2. row ***************************
-       hostgroup_id: 10
-           hostname: 192.168.9.212
-               port: 9030
-             status: ONLINE
-             weight: 1
-        compression: 0
-    max_connections: 1000
-max_replication_lag: 0
-            use_ssl: 0
-     max_latency_ms: 0
-            comment:
-*************************** 3. row ***************************
-       hostgroup_id: 10
-           hostname: 192.168.9.213
-               port: 9030
-             status: ONLINE
-             weight: 1
-        compression: 0
-    max_connections: 1000
-max_replication_lag: 0
-            use_ssl: 0
-     max_latency_ms: 0
-            comment:
-6 rows in set (0.000 sec)
-  
-ERROR: No query specified
-  
-After the above modification, load it to RUNTIME and save it to disk. The following two steps are very important, otherwise your configuration information will be gone after you exit and must be saved
-MySQL [(none)]> load mysql servers to runtime;
-Query OK, 0 rows affected (0.006 sec)
-  
-MySQL [(none)]> save mysql servers to disk;
-Query OK, 0 rows affected (0.348 sec)
-```
-
-#### Monitor Doris FE node configuration
-
-After adding doris fe nodes, you also need to monitor these back-end nodes. For multiple FE high-availability load balancing environments on the backend, this is necessary because ProxySQL needs to be automatically adjusted by the read_only value of each node
-
-Whether they belong to the read group or the write group.
-
-First create a user name for monitoring on the back-end master main data node
-
-```sql
-Execute on the node of the doris fe master master database:
-# mysql -P9030 -uroot -p 
-mysql> create user monitor@'192.168.9.%' identified by 'P@ssword1!';
-Query OK, 0 rows affected (0.03 sec)
-mysql> grant ADMIN_PRIV on *.* to monitor@'192.168.9.%';
-Query OK, 0 rows affected (0.02 sec)
- 
-Then go back to the mysql-proxy proxy layer node to configure monitoring
-# mysql -uadmin -padmin -P6032 -h127.0.0.1
-MySQL [(none)]> set mysql-monitor_username='monitor';
-Query OK, 1 row affected (0.000 sec)
- 
-MySQL [(none)]> set mysql-monitor_password='P@ssword1!';
-Query OK, 1 row affected (0.000 sec)
- 
-After modification, load to RUNTIME and save to disk
-MySQL [(none)]> load mysql variables to runtime;
-Query OK, 0 rows affected (0.001 sec)
- 
-MySQL [(none)]> save mysql variables to disk;
-Query OK, 94 rows affected (0.079 sec)
- 
-Verify the monitoring results: The indicators of the ProxySQL monitoring module are stored in the log table of the monitor library.
-The following is the monitoring of whether the connection is normal (monitoring of connect indicators):
-Note: There may be many connect_errors, this is because there is an error when the monitoring information is not configured. After the configuration, if the result of connect_error is NULL, it means normal。
-MySQL [(none)]> select * from mysql_server_connect_log;
-+---------------+------+------------------+-------------------------+---------------+
-| hostname      | port | time_start_us    | connect_success_time_us | connect_error |
-+---------------+------+------------------+-------------------------+---------------+
-| 192.168.9.211 | 9030 | 1548665195883957 | 762                     | NULL          |
-| 192.168.9.212 | 9030 | 1548665195894099 | 399                     | NULL          |
-| 192.168.9.213 | 9030 | 1548665195904266 | 483                     | NULL          |
-| 192.168.9.211 | 9030 | 1548665255883715 | 824                     | NULL          |
-| 192.168.9.212 | 9030 | 1548665255893942 | 656                     | NULL          |
-| 192.168.9.211 | 9030 | 1548665495884125 | 615                     | NULL          |
-| 192.168.9.212 | 9030  | 1548665495894254 | 441                     | NULL          |
-| 192.168.9.213 | 9030 | 1548665495904479 | 638                     | NULL          |
-| 192.168.9.211 | 9030 | 1548665512917846 | 487                     | NULL          |
-| 192.168.9.212 | 9030 | 1548665512928071 | 994                     | NULL          |
-| 192.168.9.213 | 9030 | 1548665512938268 | 613                     | NULL          |
-+---------------+------+------------------+-------------------------+---------------+
-20 rows in set (0.000 sec)
-The following is the monitoring of heartbeat information (monitoring of ping indicators)
-MySQL [(none)]> select * from mysql_server_ping_log;
-+---------------+------+------------------+----------------------+------------+
-| hostname      | port | time_start_us    | ping_success_time_us | ping_error |
-+---------------+------+------------------+----------------------+------------+
-| 192.168.9.211 | 9030 | 1548665195883407 | 98                   | NULL       |
-| 192.168.9.212 | 9030 | 1548665195885128 | 119                  | NULL       |
-...........
-| 192.168.9.213 | 9030 | 1548665415889362 | 106                  | NULL       |
-| 192.168.9.213 | 9030 | 1548665562898295 | 97                   | NULL       |
-+---------------+------+------------------+----------------------+------------+
-110 rows in set (0.001 sec)
- 
-The read_only log is also empty at this time (normally, when the new environment is configured, this read-only log is empty)
-MySQL [(none)]> select * from mysql_server_read_only_log;
-Empty set (0.000 sec)
-
-All 3 nodes are in the group with hostgroup_id=10.
-Now, load the modification of the mysql_replication_hostgroups table just now to RUNTIME to take effect。
-MySQL [(none)]> load mysql servers to runtime;
-Query OK, 0 rows affected (0.003 sec)
- 
-MySQL [(none)]> save mysql servers to disk;
-Query OK, 0 rows affected (0.361 sec)
-
-
-MySQL [(none)]> select hostgroup_id,hostname,port,status,weight from mysql_servers;
-+--------------+---------------+------+--------+--------+
-| hostgroup_id | hostname      | port | status | weight |
-+--------------+---------------+------+--------+--------+
-| 10           | 192.168.9.211 | 9030 | ONLINE | 1      |
-| 20           | 192.168.9.212 | 9030 | ONLINE | 1      |
-| 20           | 192.168.9.213 | 9030 | ONLINE | 1      |
-+--------------+---------------+------+--------+--------+
-3 rows in set (0.000 sec)
-```
-
-#### Configure Doris users
-
-All the above configurations are about the back-end Doris FE node. Now you can configure the SQL statements, including: the user who sends the SQL statement, the routing rules of the SQL statement, the cache of the SQL query, the rewriting of the SQL statement, and so on.
-
-This section is the user configuration used by the SQL request, such as the root user. This requires that we need to add relevant users to the back-end Doris FE node first. Here are examples of two user names root and doris.
-
-```sql
-First, execute on the Doris FE master master database node:
-# mysql -P9030 -uroot -p
-.........
-
-mysql> create user doris@'%' identified by 'P@ssword1!';
-Query OK, 0 rows affected, 1 warning (0.04 sec)
- 
-mysql> grant ADMIN_PRIV on *.* to doris@'%';
-Query OK, 0 rows affected, 1 warning (0.03 sec)
- 
- 
-Then go back to the mysql-proxy proxy layer node, configure the mysql_users table, and add the two users just now to the table.
-admin> insert into mysql_users(username,password,default_hostgroup) values('root','',10);
-Query OK, 1 row affected (0.001 sec)
-  
-admin> insert into mysql_users(username,password,default_hostgroup) values('doris','P@ssword1!',10);
-Query OK, 1 row affected (0.000 sec)
-  
-admin> load mysql users to runtime;
-Query OK, 0 rows affected (0.001 sec)
-  
-admin> save mysql users to disk;
-Query OK, 0 rows affected (0.108 sec)
-  
-The mysql_users table has many fields. The three main fields are username, password, and default_hostgroup:
-      -username: The username used by the front-end to connect to ProxySQL and ProxySQL to route SQL statements to MySQL.
-      -password: the password corresponding to the user name. It can be a plain text password or a hash password. If you want to use the hash password, you can execute it on a MySQL node first  select password(PASSWORD), and then copy the encryption result to this field.
-      -default_hostgroup: The default routing destination of the username. For example, when the field value of the specified root user is 10, the SQL statement sent by the root user is used by default
-    In this case, it will be routed to a node in the hostgroup_id=10 group.
- 
-admin> select * from mysql_users\G
-*************************** 1. row ***************************
-              username: root
-              password: 
-                active: 1
-               use_ssl: 0
-     default_hostgroup: 10
-        default_schema: NULL
-         schema_locked: 0
-transaction_persistent: 1
-          fast_forward: 0
-               backend: 1
-              frontend: 1
-       max_connections: 10000
-*************************** 2. row ***************************
-              username: doris
-              password: P@ssword1!
-                active: 1
-               use_ssl: 0
-     default_hostgroup: 10
-        default_schema: NULL
-         schema_locked: 0
-transaction_persistent: 1
-          fast_forward: 0
-               backend: 1
-              frontend: 1
-       max_connections: 10000
-2 rows in set (0.000 sec)
-  
-Although the mysql_users table is not described in detail here, only users with active=1 are valid users, and the default active is 1.
-
-MySQL [(none)]> load mysql users to runtime;
-Query OK, 0 rows affected (0.001 sec)
- 
-MySQL [(none)]> save mysql users to disk;
-Query OK, 0 rows affected (0.123 sec)
-
-In this way, you can use the doris username and password to connect to ProxySQL through the sql client
-```
-
-#### Connect to Doris through ProxySQL for testing
-
-Next, use the root user and doris user to test whether they can be routed to the default hostgroup_id=10 (it is a write group) to read data. The following is connected through the forwarding port 6033, the connection is forwarded to the real back-end database!
-
-```sql
-#mysql -uroot -p -P6033 -hdoris01 -e "show databases;"
-Enter password: 
-ERROR 9001 (HY000) at line 1: Max connect timeout reached while reaching hostgroup 10 after 10000ms
-At this time, an error was found, and it was not forwarded to the real doris fe on the backend.
-Through the log, you can see that there is set autocommit=0 to open the transaction
-Check the configuration found:
-
-mysql-forward_autocommit=false
-mysql-autocommit_false_is_transaction=false
-
-We don’t need to read and write separation here, just turn these two parameters into true directly through the following statement.
-mysql> UPDATE global_variables SET variable_value='true' WHERE variable_name='mysql-forward_autocommit';
-Query OK, 1 row affected (0.00 sec)
-
-mysql> UPDATE global_variables SET variable_value='true' WHERE variable_name='mysql-autocommit_false_is_transaction';
-Query OK, 1 row affected (0.01 sec)
-
-mysql>  LOAD MYSQL VARIABLES TO RUNTIME;
-Query OK, 0 rows affected (0.00 sec)
-
-mysql> SAVE MYSQL VARIABLES TO DISK;
-Query OK, 98 rows affected (0.12 sec)
-
-Then we try again and it shows success
-[root@doris01 ~]# mysql -udoris -pP@ssword1! -P6033 -h192.168.9.211  -e "show databases;"
-Warning: Using a password on the command line interface can be insecure.
-+--------------------+
-| Database           |
-+--------------------+
-| doris_audit_db     |
-| information_schema |
-| retail             |
-+--------------------+
-```
-
-OK, that's the end, you can use Mysql client, JDBC, etc. to connect to ProxySQL to operate your doris.
-
-## Nginx TCP reverse proxy method
-
-### Overview
-
-Nginx can implement load balancing of HTTP and HTTPS protocols, as well as load balancing of TCP protocol. So, the question is, can the load balancing of the Apache Doris database be achieved through Nginx? The answer is: yes. Next, let's discuss how to use Nginx to achieve load balancing of Apache Doris.
-
-### Environmental preparation
-
-**Note: Using Nginx to achieve load balancing of Apache Doris database, the premise is to build an Apache Doris environment. The IP and port of Apache Doris FE are as follows. Here I use one FE to demonstrate, multiple FEs only You need to add multiple FE IP addresses and ports in the configuration**
-
-The Apache Doris and port to access MySQL through Nginx are shown below.
-
-```
-IP: 172.31.7.119 
-端口: 9030
-```
-
-### Install dependencies
-
-```bash
-sudo apt-get install build-essential
-sudo apt-get install libpcre3 libpcre3-dev 
-sudo apt-get install zlib1g-dev
-sudo apt-get install openssl libssl-dev
-```
-
-### Install Nginx
-
-```bash
-sudo wget http://nginx.org/download/nginx-1.18.0.tar.gz
-sudo tar zxvf nginx-1.18.0.tar.gz
-cd nginx-1.18.0
-sudo ./configure --prefix=/usr/local/nginx --with-stream --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module
-sudo make && make install
-```
-
-### Configure reverse proxy
-
-Here is a new configuration file
-
-```bash
-vim /usr/local/nginx/conf/default.conf
-```
-
-Then add the following in it
-
-```bash
-events {
-worker_connections 1024;
-}
-stream {
-  upstream mysqld {
-      hash $remote_addr consistent;
-      server 172.31.7.119:9030 weight=1 max_fails=2 fail_timeout=60s;
-      ##注意这里如果是多个FE,加载这里就行了
-  }
-  ###这里是配置代理的端口,超时时间等
-  server {
-      listen 6030;
-      proxy_connect_timeout 30s;
-      proxy_timeout 30s;
-      proxy_pass mysqld;
-  }
-}
-```
-
-### Start Nginx
-
-Start the specified configuration file
-
-```bash
-cd /usr/local/nginx
-/usr/local/nginx/sbin/nginx -c conf.d/default.conf
-```
-
-### verify
-
-```
-mysql -uroot -P6030 -h172.31.7.119
-```
-
-Parameter explanation: -u specifies the Doris username -p specifies the Doris password, my password here is empty, so there is no -h specifies the Nginx proxy server IP-P specifies the port
-
-```sql
-mysql -uroot -P6030 -h172.31.7.119
-Welcome to the MySQL monitor.  Commands end with ; or \g.
-Your MySQL connection id is 13
-Server version: 5.1.0 Doris version 0.15.1-rc09-Unknown
-
-Copyright (c) 2000, 2022, Oracle and/or its affiliates.
-
-Oracle is a registered trademark of Oracle Corporation and/or its
-affiliates. Other names may be trademarks of their respective
-owners.
-
-Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
-
-mysql> show databases;
-+--------------------+
-| Database           |
-+--------------------+
-| information_schema |
-| test               |
-+--------------------+
-2 rows in set (0.00 sec)
-
-mysql> use test;
-Reading table information for completion of table and column names
-You can turn off this feature to get a quicker startup with -A
-
-Database changed
-mysql> show tables;
-+------------------+
-| Tables_in_test   |
-+------------------+
-| dwd_product_live |
-+------------------+
-1 row in set (0.00 sec)
-mysql> desc dwd_product_live;
-+-----------------+---------------+------+-------+---------+---------+
-| Field           | Type          | Null | Key   | Default | Extra   |
-+-----------------+---------------+------+-------+---------+---------+
-| dt              | DATE          | Yes  | true  | NULL    |         |
-| proId           | BIGINT        | Yes  | true  | NULL    |         |
-| authorId        | BIGINT        | Yes  | true  | NULL    |         |
-| roomId          | BIGINT        | Yes  | true  | NULL    |         |
-| proTitle        | VARCHAR(1024) | Yes  | false | NULL    | REPLACE |
-| proLogo         | VARCHAR(1024) | Yes  | false | NULL    | REPLACE |
-| shopId          | BIGINT        | Yes  | false | NULL    | REPLACE |
-| shopTitle       | VARCHAR(1024) | Yes  | false | NULL    | REPLACE |
-| profrom         | INT           | Yes  | false | NULL    | REPLACE |
-| proCategory     | BIGINT        | Yes  | false | NULL    | REPLACE |
-| proPrice        | DECIMAL(18,2) | Yes  | false | NULL    | REPLACE |
-| couponPrice     | DECIMAL(18,2) | Yes  | false | NULL    | REPLACE |
-| livePrice       | DECIMAL(18,2) | Yes  | false | NULL    | REPLACE |
-| volume          | BIGINT        | Yes  | false | NULL    | REPLACE |
-| addedTime       | BIGINT        | Yes  | false | NULL    | REPLACE |
-| offTimeUnix     | BIGINT        | Yes  | false | NULL    | REPLACE |
-| offTime         | BIGINT        | Yes  | false | NULL    | REPLACE |
-| createTime      | BIGINT        | Yes  | false | NULL    | REPLACE |
-| createTimeUnix  | BIGINT        | Yes  | false | NULL    | REPLACE |
-| amount          | DECIMAL(18,2) | Yes  | false | NULL    | REPLACE |
-| views           | BIGINT        | Yes  | false | NULL    | REPLACE |
-| commissionPrice | DECIMAL(18,2) | Yes  | false | NULL    | REPLACE |
-| proCostPrice    | DECIMAL(18,2) | Yes  | false | NULL    | REPLACE |
-| proCode         | VARCHAR(1024) | Yes  | false | NULL    | REPLACE |
-| proStatus       | INT           | Yes  | false | NULL    | REPLACE |
-| status          | INT           | Yes  | false | NULL    | REPLACE |
-| maxPrice        | DECIMAL(18,2) | Yes  | false | NULL    | REPLACE |
-| liveView        | BIGINT        | Yes  | false | NULL    | REPLACE |
-| firstCategory   | BIGINT        | Yes  | false | NULL    | REPLACE |
-| secondCategory  | BIGINT        | Yes  | false | NULL    | REPLACE |
-| thirdCategory   | BIGINT        | Yes  | false | NULL    | REPLACE |
-| fourCategory    | BIGINT        | Yes  | false | NULL    | REPLACE |
-| minPrice        | DECIMAL(18,2) | Yes  | false | NULL    | REPLACE |
-| liveVolume      | BIGINT        | Yes  | false | NULL    | REPLACE |
-| liveClick       | BIGINT        | Yes  | false | NULL    | REPLACE |
-| extensionId     | VARCHAR(128)  | Yes  | false | NULL    | REPLACE |
-| beginTime       | BIGINT        | Yes  | false | NULL    | REPLACE |
-| roomTitle       | TEXT          | Yes  | false | NULL    | REPLACE |
-| beginTimeUnix   | BIGINT        | Yes  | false | NULL    | REPLACE |
-| nickname        | TEXT          | Yes  | false | NULL    | REPLACE |
-+-----------------+---------------+------+-------+---------+---------+
-40 rows in set (0.06 sec)
-```
-
diff --git a/docs/admin-manual/cluster-management/upgrade.md b/docs/admin-manual/cluster-management/upgrade.md
deleted file mode 100644
index 99b7cbea5dd..00000000000
--- a/docs/admin-manual/cluster-management/upgrade.md
+++ /dev/null
@@ -1,119 +0,0 @@
----
-{
-    "title": "Cluster upgrade",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-
-# Cluster upgrade
-
-Doris can upgrade smoothly by rolling upgrades. The following steps are recommended for security upgrade.
-
-**The name of the BE binary that appears in this doc is `doris_be`, which was `palo_be` in previous versions.**
-
-> **Note:**
-> 1. Doris does not support upgrading across two-digit version numbers, for example: you cannot upgrade directly from 0.13 to 0.15, only through 0.13.x -> 0.14.x -> 0.15.x, and the three-digit version number can be upgraded across versions, such as from 0.13 .15 can be directly upgraded to 0.14.13.1, it is not necessary to upgrade 0.14.7 or 0.14.12.1
-> 2. The following approaches are based on highly available deployments. That is, data 3 replicas, FE high availability.
-
-## Preparen
-
-1. Turn off the replica repair and balance operation.
-
-     There will be node restarts during the upgrade process, so unnecessary cluster balancing and replica repair logic may be triggered. You can close it first with the following command:
-
-     ```
-     # Turn off the replica ealance logic. After it is closed, the balancing operation of the ordinary table replica will no longer be triggered.
-     $ mysql-client> admin set frontend config("disable_balance" = "true");
-     
-     # Turn off the replica balance logic of the colocation table. After it is closed, the replica redistribution operation of the colocation table will no longer be triggered.
-     $ mysql-client> admin set frontend config("disable_colocate_balance" = "true");
-     
-     # Turn off the replica scheduling logic. After shutting down, all generated replica repair and balancing tasks will no longer be scheduled.
-     $ mysql-client> admin set frontend config("disable_tablet_scheduler" = "true");
-     ```
-
-     After the cluster is upgraded, just use the above command to set the corresponding configuration to the original value.
-
-2. **important! ! Metadata needs to be backed up before upgrading(The entire directory needs to be backed up)! !**
-
-    Let's assume that the path of `meta_dir` specified in fe.conf is `path/to/doris-meta`. In a normal Doris cluster, the directory structure of metadata should be as follows:
-
-    ```
-    /path/to/doris-meta/
-                |-- bdb/
-                |   |-- 00000000.jdb
-                |   |-- je.config.csv
-                |   |-- je.info.0
-                |   |-- je.info.0.lck
-                |   |-- je.lck
-                |   `-- je.stat.csv
-                `-- image/
-                    |-- ROLE
-                    |-- VERSION
-                    `-- image.xxxx
-    ```
-    The metadata directory to be backed up is  `doris-meta/`
-
-## Test the correctness of BE upgrade
-
-1. Arbitrarily select a BE node and deploy the latest doris_be binary file.
-2. Restart the BE node and check the BE log be.INFO to see if the boot was successful.
-3. If the startup fails, you can check the reason first. If the error is not recoverable, you can delete the BE directly through DROP BACKEND, clean up the data, and restart the BE using the previous version of doris_be. Then re-ADD BACKEND. (**This method will result in the loss of a copy of the data, please make sure that three copies are complete, and perform this operation!!!**
-
-## Testing FE Metadata Compatibility
-
-0. **Important! Exceptional metadata compatibility is likely to cause data cannot be restored!!**
-1. Deploy a test FE process (It is recommended to use your own local development machine, or BE node. If it is on the Follower or Observer node, you need to stop the started process, but it is not recommended to test on the Follower or Observer node) using the new version alone.
-2. Modify the FE configuration file fe.conf for testing and set all ports to **different from online**.
-3. Add configuration in fe.conf: cluster_id=123456
-4. Add configuration in fe.conf: metadata_failure_recovery=true
-5. Copy the metadata directory doris-meta of the online environment master Fe to the test environment
-6.The cluster_ID where copy to the doris-meta/image/VERSION file in the test environment is modified to 123456 (that is, the same as in Step 3)
-7. In the test environment,running sh sh bin/start_fe.sh,start FE.
-8. Observe whether the start-up is successful through FE log fe.log.
-9. If the startup is successful, run sh bin/stop_fe.sh to stop the FE process of the test environment.
-10. **The purpose of the above 2-6 steps is to prevent the FE of the test environment from being misconnected to the online environment after it starts.**
-
-## Upgrade preparation
-
-1. After data validation, the new version of BE and FE binary files are distributed to their respective directories.
-2. Usually small version upgrade, BE only needs to upgrade doris_be; FE only needs to upgrade doris-fe.jar(which was palo-fe.jar in previous versions). If it is a large version upgrade, you may need to upgrade other files (including but not limited to bin / , lib / etc.) If you are not sure whether you need to replace other files, it is recommended to replace all of them.
-
-## rolling upgrade
-
-1. Confirm that the new version of the file is deployed. Restart FE and BE instances one by one.
-2. It is suggested that BE be restarted one by one and FE be restarted one by one. Because Doris usually guarantees backward compatibility between FE and BE, that is, the old version of FE can access the new version of BE. However, the old version of BE may not be supported to access the new version of FE.
-3. It is recommended to restart the next instance after confirming the previous instance started successfully. Refer to the [Installation Deployment Document](../../install/install-deploy.md) for the identification of successful instance startup.
-
-## About version rollback
-Because the database is a stateful service, Doris cannot support version rollback (version downgrade) in most cases. In some cases, the rollback of the 3-bit or 4-bit version can be supported, but the rollback of the 2-bit version will not be supported.
-
-Therefore, it is recommended to upgrade some nodes and observe the business operation (gray upgrade) to reduce the upgrade risk.
-
-**Illegal rollback operation may cause data loss and damage.** 
-
-## Documentation
-1. [Doris metadata design document](/community/design/metadata-design) 
-2. [Metadata Operations and Maintenance](../../admin-manual/maint-monitor/metadata-operation.md) 
-3. [Data replica management](../../admin-manual/maint-monitor/tablet-repair-and-balance.md)
-4. [Installation Deployment Document](../../install/install-deploy.md)
diff --git a/docs/admin-manual/config/be-config.md b/docs/admin-manual/config/be-config.md
deleted file mode 100644
index 90e9d044208..00000000000
--- a/docs/admin-manual/config/be-config.md
+++ /dev/null
@@ -1,1547 +0,0 @@
----
-{
-    "title": "BE Configuration",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-<!-- Please sort the configuration alphabetically -->
-
-# BE Configuration
-
-This document mainly introduces the relevant configuration items of BE.
-
-The BE configuration file `be.conf` is usually stored in the `conf/` directory of the BE deployment path. In version 0.14, another configuration file `be_custom.conf` will be introduced. The configuration file is used to record the configuration items that are dynamically configured and persisted by the user during operation.
-
-After the BE process is started, it will read the configuration items in `be.conf` first, and then read the configuration items in `be_custom.conf`. The configuration items in `be_custom.conf` will overwrite the same configuration items in `be.conf`.
-
-The location of the `be_custom.conf` file can be configured in `be.conf` through the `custom_config_dir` configuration item.
-
-## View configuration items
-
-Users can view the current configuration items by visiting BE's web page:
-
-`http://be_host:be_webserver_port/varz`
-
-## Set configuration items
-
-There are two ways to configure BE configuration items:
-
-1. Static configuration
-
-    Add and set configuration items in the `conf/be.conf` file. The configuration items in `be.conf` will be read when BE starts. Configuration items not in `be.conf` will use default values.
-
-2. Dynamic configuration
-
-    After BE starts, the configuration items can be dynamically set with the following commands.
-
-    ```
-    curl -X POST http://{be_ip}:{be_http_port}/api/update_config?{key}={value}'
-    ```
-
-    In version 0.13 and before, the configuration items modified in this way will become invalid after the BE process restarts. In 0.14 and later versions, the modified configuration can be persisted through the following command. The modified configuration items are stored in the `be_custom.conf` file.
-
-    ```
-    curl -X POST http://{be_ip}:{be_http_port}/api/update_config?{key}={value}&persis=true'
-    ```
-
-## Examples
-
-1. Modify `max_base_compaction_concurrency` statically
-
-     By adding in the `be.conf` file:
-
-     ```max_base_compaction_concurrency=5```
-
-     Then restart the BE process to take effect the configuration.
-
-2. Modify `streaming_load_max_mb` dynamically
-
-    After BE starts, the configuration item `streaming_load_max_mb` is dynamically set by the following command:
-
-    ```
-    curl -X POST http://{be_ip}:{be_http_port}/api/update_config?streaming_load_max_mb=1024
-    ```
-
-    The return value is as follows, indicating that the setting is successful.
-
-    ```
-    {
-        "status": "OK",
-        "msg": ""
-    }
-    ```
-
-    The configuration will become invalid after the BE restarts. If you want to persist the modified results, use the following command:
-
-    ```
-    curl -X POST http://{be_ip}:{be_http_port}/api/update_config?streaming_load_max_mb=1024\&persist=true
-    ```
-
-## Configurations
-
-### `alter_tablet_worker_count`
-
-Default: 3
-
-The number of threads making schema changes
-
-### `generate_compaction_tasks_min_interval_ms`
-
-Default: 10 (ms)
-
-Minimal interval (ms) to generate compaction tasks
-
-### `enable_vectorized_compaction`
-
-Default: true
-
-Whether to enable vectorized compaction
-
-### `base_compaction_interval_seconds_since_last_operation`
-
-Default: 86400
-
-One of the triggering conditions of BaseCompaction: the interval since the last BaseCompaction
-
-### `base_compaction_num_cumulative_deltas`
-
-Default: 5
-
-One of the triggering conditions of BaseCompaction: The limit of the number of Cumulative files to be reached. After reaching this limit, BaseCompaction will be triggered
-
-### base_compaction_trace_threshold
-
-* Type: int32
-* Description: Threshold to logging base compaction's trace information, in seconds
-* Default value: 10
-
-Base compaction is a long time cost background task, this configuration is the threshold to logging trace information. Trace information in log file looks like:
-
-```
-W0610 11:26:33.804431 56452 storage_engine.cpp:552] Trace:
-0610 11:23:03.727535 (+     0us) storage_engine.cpp:554] start to perform base compaction
-0610 11:23:03.728961 (+  1426us) storage_engine.cpp:560] found best tablet 546859
-0610 11:23:03.728963 (+     2us) base_compaction.cpp:40] got base compaction lock
-0610 11:23:03.729029 (+    66us) base_compaction.cpp:44] rowsets picked
-0610 11:24:51.784439 (+108055410us) compaction.cpp:46] got concurrency lock and start to do compaction
-0610 11:24:51.784818 (+   379us) compaction.cpp:74] prepare finished
-0610 11:26:33.359265 (+101574447us) compaction.cpp:87] merge rowsets finished
-0610 11:26:33.484481 (+125216us) compaction.cpp:102] output rowset built
-0610 11:26:33.484482 (+     1us) compaction.cpp:106] check correctness finished
-0610 11:26:33.513197 (+ 28715us) compaction.cpp:110] modify rowsets finished
-0610 11:26:33.513300 (+   103us) base_compaction.cpp:49] compaction finished
-0610 11:26:33.513441 (+   141us) base_compaction.cpp:56] unused rowsets have been moved to GC queue
-Metrics: {"filtered_rows":0,"input_row_num":3346807,"input_rowsets_count":42,"input_rowsets_data_size":1256413170,"input_segments_num":44,"merge_rowsets_latency_us":101574444,"merged_rows":0,"output_row_num":3346807,"output_rowset_data_size":1228439659,"output_segments_num":6}
-```
-
-### `base_compaction_write_mbytes_per_sec`
-
-Default: 5(MB)
-
-Maximum disk write speed per second of BaseCompaction task
-
-### `base_cumulative_delta_ratio`
-
-Default: 0.3  (30%)
-
-One of the trigger conditions of BaseCompaction: Cumulative file size reaches the proportion of Base file
-
-### `be_port`
-
-* Type: int32
-* Description: The port of the thrift server on BE which used to receive requests from FE
-* Default value: 9060
-
-### `be_service_threads`
-
-* Type: int32
-* Description: The number of execution threads of the thrift server service on BE which represents the number of threads that can be used to execute FE requests.
-* Default value: 64
-
-### `brpc_max_body_size`
-
-This configuration is mainly used to modify the parameter `max_body_size` of brpc.
-
-Sometimes the query fails and an error message of `body_size is too large` will appear in the BE log. This may happen when the SQL mode is "multi distinct + no group by + more than 1T of data".
-
-This error indicates that the packet size of brpc exceeds the configured value. At this time, you can avoid this error by increasing the configuration.
-
-### `brpc_socket_max_unwritten_bytes`
-
-This configuration is mainly used to modify the parameter `socket_max_unwritten_bytes` of brpc.
-
-Sometimes the query fails and an error message of `The server is overcrowded` will appear in the BE log. This means there are too many messages to buffer at the sender side, which may happen when the SQL needs to send large bitmap value. You can avoid this error by increasing the configuration.
-
-### `transfer_large_data_by_brpc`
-
-* Type: bool
-* Description: This configuration is used to control whether to serialize the protoBuf request and embed the Tuple/Block data into the controller attachment and send it through http brpc when the length of the Tuple/Block data is greater than 1.8G. To avoid errors when the length of the protoBuf request exceeds 2G: Bad request, error_text=[E1003]Fail to compress request. In the past version, after putting Tuple/Block data in the attachment, it was sent through the default baidu_std brpc, [...]
-* Default value: true
-
-### `brpc_num_threads`
-
-This configuration is mainly used to modify the number of bthreads for brpc. The default value is set to -1, which means the number of bthreads is #cpu-cores.
-
-User can set this configuration to a larger value to get better QPS performance. For more information, please refer to `https://github.com/apache/incubator-brpc/blob/master/docs/cn/benchmark.md`
-
-### `brpc_port`
-
-* Type: int32
-* Description: The port of BRPC on BE, used for communication between BEs
-* Default value: 9060
-
-### `buffer_pool_clean_pages_limit`
-
-default: 50%
-
-Clean up pages that may be saved by the buffer pool
-
-### `buffer_pool_limit`
-
-* Type: string
-* Description: The largest allocatable memory of the buffer pool
-* Default value: 20%
-
-The maximum amount of memory available in the BE buffer pool. The buffer pool is a new memory management structure of BE, which manages the memory by the buffer page and enables spill data to disk. The memory for all concurrent queries will be allocated from the buffer pool. The current buffer pool only works on **AggregationNode** and **ExchangeNode**.
-
-### `check_auto_compaction_interval_seconds`
-
-* Type: int32
-* Description: Check the configuration of auto compaction in seconds when auto compaction disabled.
-* Default value: 5
-
-### `check_consistency_worker_count`
-
-Default: 1
-
-The number of worker threads to calculate the checksum of the tablet
-
-### `chunk_reserved_bytes_limit`
-
-Default: 20%
-
-The reserved bytes limit of Chunk Allocator, usually set as a percentage of mem_limit. defaults to bytes if no unit is given, the number of bytes must be a multiple of 2. must larger than 0. and if larger than physical memory size, it will be set to physical memory size. increase this variable can improve performance, but will acquire more free memory which can not be used by other modules.
-
-### `clear_transaction_task_worker_count`
-
-Default: 1
-
-Number of threads used to clean up transactions
-
-### `clone_worker_count`
-
-Default: 3
-
-Number of threads used to perform cloning tasks
-
-### `cluster_id`
-
-* Type: int32
-* Description: Configure the cluster id to which the BE belongs.
-* Default value: -1
-
-This value is usually delivered by the FE to the BE by the heartbeat, no need to configure. When it is confirmed that a BE belongs to a certain Drois cluster, it can be configured. The cluster_id file under the data directory needs to be modified to make sure same as this parament.
-
-### `column_dictionary_key_ratio_threshold`
-
-Default: 0
-
-The value ratio of string type, less than this ratio, using dictionary compression algorithm
-
-### `column_dictionary_key_size_threshold`
-
-Default: 0
-
-Dictionary compression column size, less than this value using dictionary compression algorithm
-
-### `compaction_tablet_compaction_score_factor`
-
-* Type: int32
-* Description: Coefficient for compaction score when calculating tablet score to find a tablet for compaction.
-* Default value: 1
-
-### `compaction_tablet_scan_frequency_factor`
-
-* Type: int32
-* Description: Coefficient for tablet scan frequency when calculating tablet score to find a tablet for compaction.
-* Default value: 0
-
-Tablet scan frequency can be taken into consideration when selecting an tablet for compaction and preferentially do compaction for those tablets which are scanned frequently during a latest period of time at the present.
-Tablet score can be calculated like this:
-
-tablet_score = compaction_tablet_scan_frequency_factor * tablet_scan_frequency + compaction_tablet_compaction_score_factor * compaction_score
-
-### `compaction_task_num_per_disk`
-
-* Type: int32
-* Description: The number of compaction tasks which execute in parallel for a disk(HDD).
-* Default value: 2
-
-### `compaction_task_num_per_fast_disk`
-
-* Type: int32
-* Description: The number of compaction tasks which execute in parallel for a fast disk(SSD).
-* Default value: 4
-
-### `compress_rowbatches`
-
-* Type: bool
-* Description: enable to use Snappy compression algorithm for data compression when serializing RowBatch
-* Default value: true
-
-### `create_tablet_worker_count`
-
-Default: 3
-
-Number of worker threads for BE to create a tablet
-
-### `cumulative_compaction_rounds_for_each_base_compaction_round`
-
-* Type: int32
-* Description: How many rounds of cumulative compaction for each round of base compaction when compaction tasks generation.
-* Default value: 9
-
-### `disable_auto_compaction`
-
-* Type: bool
-* Description: Whether disable automatic compaction task
-* Default value: false
-
-Generally it needs to be turned off. When you want to manually operate the compaction task in the debugging or test environment, you can turn on the configuration.
-
-### `cumulative_compaction_budgeted_bytes`
-
-Default: 104857600
-
-One of the trigger conditions of BaseCompaction: Singleton file size limit, 100MB
-
-### cumulative_compaction_trace_threshold
-
-* Type: int32
-* Description: Threshold to logging cumulative compaction's trace information, in seconds
-* Default value: 10
-
-Similar to `base_compaction_trace_threshold`.
-
-### disable_compaction_trace_log
-
-* Type: bool
-* Description: disable the trace log of compaction
-* Default value: true
-
-If set to true, the `cumulative_compaction_trace_threshold` and `base_compaction_trace_threshold` won't work and log is disabled.
-
-### `cumulative_compaction_policy`
-
-* Type: string
-* Description: Configure the merge policy of the cumulative compaction stage. Currently, two merge policy have been implemented, num_based and size_based.
-* Default value: size_based
-
-In detail, ordinary is the initial version of the cumulative compaction merge policy. After a cumulative compaction, the base compaction process is directly performed. The size_based policy is an optimized version of the ordinary strategy. Versions are merged only when the disk volume of the rowset is of the same order of magnitude. After the compaction, the output rowset which satisfies the conditions is promoted to the base compaction stage. In the case of a large number of small batch [...]
-
-### `cumulative_size_based_promotion_size_mbytes`
-
-* Type: int64
-* Description: Under the size_based policy, the total disk size of the output rowset of cumulative compaction exceeds this configuration size, and the rowset will be used for base compaction. The unit is m bytes.
-* Default value: 1024
-
-In general, if the configuration is less than 2G, in order to prevent the cumulative compression time from being too long, resulting in the version backlog.
-
-### `cumulative_size_based_promotion_ratio`
-
-* Type: double
-* Description: Under the size_based policy, when the total disk size of the cumulative compaction output rowset exceeds the configuration ratio of the base version rowset, the rowset will be used for base compaction.
-* Default value: 0.05
-
-Generally, it is recommended that the configuration should not be higher than 0.1 and lower than 0.02.
-
-### `cumulative_size_based_promotion_min_size_mbytes`
-
-* Type: int64
-* Description: Under the size_based strategy, if the total disk size of the output rowset of the cumulative compaction is lower than this configuration size, the rowset will not undergo base compaction and is still in the cumulative compaction process. The unit is m bytes.
-* Default value: 64
-
-Generally, the configuration is within 512m. If the configuration is too large, the size of the early base version is too small, and base compaction has not been performed.
-
-### `cumulative_size_based_compaction_lower_size_mbytes`
-
-* Type: int64
-* Description: Under the size_based strategy, when the cumulative compaction is merged, the selected rowsets to be merged have a larger disk size than this configuration, then they are divided and merged according to the level policy. When it is smaller than this configuration, merge directly. The unit is m bytes.
-* Default value: 64
-
-Generally, the configuration is within 128m. Over configuration will cause more cumulative compaction write amplification.
-
-### `custom_config_dir`
-
-Configure the location of the `be_custom.conf` file. The default is in the `conf/` directory.
-
-In some deployment environments, the `conf/` directory may be overwritten due to system upgrades. This will cause the user modified configuration items to be overwritten. At this time, we can store `be_custom.conf` in another specified directory to prevent the configuration file from being overwritten.
-
-### `default_num_rows_per_column_file_block`
-
-* Type: int32
-* Description: Configure how many rows of data are contained in a single RowBlock.
-* Default value: 1024
-
-### `default_rowset_type`
-
-* Type: string
-* Description: Identifies the storage format selected by BE by default. The configurable parameters are: "**ALPHA**", "**BETA**". Mainly play the following two roles
-1. When the storage_format of the table is set to Default, select the storage format of BE through this configuration.
-2. Select the storage format of when BE performing Compaction
-* Default value: BETA
-
-### `delete_worker_count`
-
-Default: 3
-
-Number of threads performing data deletion tasks
-
-### `disable_mem_pools`
-
-Default: false
-
-Whether to disable the memory cache pool, it is not disabled by default
-
-### `disable_storage_page_cache`
-
-* Type: bool
-* Description: Disable to use page cache for index caching, this configuration only takes effect in BETA storage format, usually it is recommended to false
-* Default value: false
-
-### `disk_stat_monitor_interval`
-
-Default: 5(s)
-
-Disk status check interval
-
-### `doris_cgroups`
-
-Default: empty
-
-Cgroups assigned to doris
-
-### `doris_max_pushdown_conjuncts_return_rate`
-
-* Type: int32
-* Description: When BE performs HashJoin, it will adopt a dynamic partitioning method to push the join condition to OlapScanner. When the data scanned by OlapScanner is larger than 32768 rows, BE will check the filter condition. If the filter rate of the filter condition is lower than this configuration, Doris will stop using the dynamic partition clipping condition for data filtering.
-* Default value: 90
-
-### `doris_max_scan_key_num`
-
-* Type: int
-* Description: Used to limit the maximum number of scan keys that a scan node can split in a query request. When a conditional query request reaches the scan node, the scan node will try to split the conditions related to the key column in the query condition into multiple scan key ranges. After that, these scan key ranges will be assigned to multiple scanner threads for data scanning. A larger value usually means that more scanner threads can be used to increase the parallelism of the s [...]
-* Default value: 1024
-
-When the concurrency cannot be improved in high concurrency scenarios, try to reduce this value and observe the impact.
-
-### `doris_scan_range_row_count`
-
-* Type: int32
-* Description: When BE performs data scanning, it will split the same scanning range into multiple ScanRanges. This parameter represents the scan data range of each ScanRange. This parameter can limit the time that a single OlapScanner occupies the io thread.
-* Default value: 524288
-
-### `doris_scanner_queue_size`
-
-* Type: int32
-* Description: The length of the RowBatch buffer queue between TransferThread and OlapScanner. When Doris performs data scanning, it is performed asynchronously. The Rowbatch scanned by OlapScanner will be placed in the scanner buffer queue, waiting for the upper TransferThread to take it away.
-* Default value: 1024
-
-### `doris_scanner_row_num`
-
-Default: 16384
-
-The maximum number of data rows returned by each scanning thread in a single execution
-
-### `doris_scanner_thread_pool_queue_size`
-
-* Type: int32
-* Description: The queue length of the Scanner thread pool. In Doris' scanning tasks, each Scanner will be submitted as a thread task to the thread pool waiting to be scheduled, and after the number of submitted tasks exceeds the length of the thread pool queue, subsequent submitted tasks will be blocked until there is a empty slot in the queue. 
-* Default value: 102400
-
-### `doris_scanner_thread_pool_thread_num`
-
-* Type: int32
-* Description: The number of threads in the Scanner thread pool. In Doris' scanning tasks, each Scanner will be submitted as a thread task to the thread pool to be scheduled. This parameter determines the size of the Scanner thread pool.
-* Default value: 48
-
-### `download_low_speed_limit_kbps`
-
-Default: 50 (KB/s)
-
-Minimum download speed
-
-### `download_low_speed_time`
-
-Default: 300(s)
-
-Download time limit, 300 seconds by default
-
-### `download_worker_count`
-
-Default: 1
-
-The number of download threads, the default is 1
-
-### `drop_tablet_worker_count`
-
-Default: 3
-
-Number of threads to delete tablet
-
-### `enable_metric_calculator`
-
-Default: true
-
-If set to true, the metric calculator will run to collect BE-related indicator information, if set to false, it will not run
-
-### `enable_partitioned_aggregation`
-
-* Type: bool
-* Description: Whether the BE node implements the aggregation operation by PartitionAggregateNode, if false, AggregateNode will be executed to complete the aggregation. It is not recommended to set it to false in non-special demand scenarios.
-* Default value: true
-
-### `enable_prefetch`
-* Type: bool
-* Description: When using PartitionedHashTable for aggregation and join calculations, whether to perform HashBuket prefetch. Recommended to be set to true
-* Default value: true
-
-### `enable_quadratic_probing`
-
-* Type: bool
-* Description: When a Hash conflict occurs when using PartitionedHashTable, enable to use the square detection method to resolve the Hash conflict. If the value is false, linear detection is used to resolve the Hash conflict. For the square detection method, please refer to: [quadratic_probing](https://en.wikipedia.org/wiki/Quadratic_probing)
-* Default value: true
-
-### `enable_system_metrics`
-
-Default: true
-
-User control to turn on and off system indicators.
-
-### `enable_token_check`
-
-Default: true
-
-Used for forward compatibility, will be removed later.
-
-### `es_http_timeout_ms`
-
-Default: 5000 (ms)
-
-The timeout period for connecting to ES via http, the default is 5 seconds.
-
-### `enable_stream_load_record`
-
-Default: false
-
-Whether to enable stream load record function, the default is false,Disable stream load record.
-
-### `es_scroll_keepalive`
-
-Default: 5m
-
-es scroll Keeplive hold time, the default is 5 minutes
-
-### `etl_thread_pool_queue_size`
-
-Default: 256
-
-The size of the ETL thread pool
-
-### `etl_thread_pool_size`
-
-### `exchg_node_buffer_size_bytes`
-
-* Type: int32
-* Description: The size of the Buffer queue of the ExchangeNode node, in bytes. After the amount of data sent from the Sender side is larger than the Buffer size of ExchangeNode, subsequent data sent will block until the Buffer frees up space for writing.
-* Default value: 10485760
-
-### `file_descriptor_cache_capacity`
-
-Default: 32768
-
-File handle cache capacity, 32768 file handles are cached by default.
-
-### `cache_clean_interval`
-
-Default: 1800(s)
-
-File handle cache cleaning interval, used to clean up file handles that have not been used for a long time.
-Also the clean interval of Segment Cache.
-
-### `flush_thread_num_per_store`
-
-Default: 2
-
-The number of threads used to refresh the memory table per store
-
-### `force_recovery`
-
-### `fragment_pool_queue_size`
-
-Default: 2048
-
-The upper limit of query requests that can be processed on a single node
-
-### `fragment_pool_thread_num_min`
-
-Default: 64
-
-### `fragment_pool_thread_num_max`
-
-Default: 256
-
-The above two parameters are to set the number of query threads. By default, a minimum of 64 threads will be started, subsequent query requests will dynamically create threads, and a maximum of 256 threads will be created.
-
-### `heartbeat_service_port`
-* Type: int32
-* Description: Heartbeat service port (thrift) on BE, used to receive heartbeat from FE
-* Default value: 9050
-
-### `heartbeat_service_thread_count`
-
-* Type: int32
-* Description: The number of threads that execute the heartbeat service on BE. the default is 1, it is not recommended to modify
-* Default value: 1
-
-### `ignore_broken_disk`
-
-Default: false
-
-When BE start, If there is a broken disk, BE process will exit by default.Otherwise, we will ignore the broken disk
-
-### `ignore_load_tablet_failure`
-When BE starts, it will check all the paths under the storage_root_path in configuration.
-
-`ignore_broken_disk=true`
-
-If the path does not exist or the file under the path cannot be read or written (broken disk), it will be ignored. If there are any other available paths, the startup will not be interrupted.
-
-`ignore_broken_disk=false`
-
-If the path does not exist or the file under the path cannot be read or written (bad disk), the startup will fail and exit.
-
-The default value is false.
-```
-load tablets from header failed, failed tablets size: xxx, path=xxx
-```
-
-Indicates how many tablets in the data directory failed to load. At the same time, the log will also contain specific information about the tablet that failed to load. At this time, manual intervention is required to troubleshoot the cause of the error. After investigation, there are usually two ways to recover:
-
-1. The tablet information cannot be repaired. If the other copies are normal, you can delete the wrong tablet with the `meta_tool` tool.
-2. Set `ignore_load_tablet_failure` to true, BE will ignore these faulty tablets and start normally
-
-### ignore_rowset_stale_unconsistent_delete
-
-* Type: boolean
-* Description:It is used to decide whether to delete the outdated merged rowset if it cannot form a consistent version path.
-* Default: false
-
-The merged expired rowset version path will be deleted after half an hour. In abnormal situations, deleting these versions will result in the problem that the consistent path of the query cannot be constructed. When the configuration is false, the program check is strict and the program will directly report an error and exit.
-When configured as true, the program will run normally and ignore this error. In general, ignoring this error will not affect the query, only when the merged version is dispatched by fe, -230 error will appear.
-
-### inc_rowset_expired_sec
-
-Default: 1800 (s)
-
-Import activated data, storage engine retention time, used for incremental cloning
-
-### `index_stream_cache_capacity`
-
-Default: 10737418240
-
-BloomFilter/Min/Max and other statistical information cache capacity
-
-### `kafka_api_version_request`
-
-Default: true
-
-If the dependent Kafka version is lower than 0.10.0.0, this value should be set to false.
-
-### `kafka_broker_version_fallback`
-
-Default: 0.10.0
-
-If the dependent Kafka version is lower than 0.10.0.0, the value set by the fallback version kafka_broker_version_fallback will be used if the value of kafka_api_version_request is set to false, and the valid values are: 0.9.0.x, 0.8.x.y.
-
-### `load_data_reserve_hours`
-
-Default: 4(hour)
-
-Used for mini load. The mini load data file will be deleted after this time
-
-### `load_error_log_reserve_hours`
-
-Default: 48 (hour)
-
-The load error log will be deleted after this time
-
-### `load_process_max_memory_limit_bytes`
-
-Default: 107374182400
-
-The upper limit of memory occupied by all imported threads on a single node, default value: 100G
-
-Set these default values very large, because we don't want to affect load performance when users upgrade Doris. If necessary, the user should set these configurations correctly.
-
-### `load_process_max_memory_limit_percent`
-
-Default: 80 (%)
-
-The percentage of the upper memory limit occupied by all imported threads on a single node, the default is 80%
-
-Set these default values very large, because we don't want to affect load performance when users upgrade Doris. If necessary, the user should set these configurations correctly
-
-### `log_buffer_level`
-
-Default: empty
-
-The log flushing strategy is kept in memory by default
-
-### `madvise_huge_pages`
-
-Default: false
-
-Whether to use linux memory huge pages, not enabled by default
-
-### `make_snapshot_worker_count`
-
-Default: 5
-
-Number of threads making snapshots
-
-### `max_client_cache_size_per_host`
-
-Default: 10
-
-The maximum number of client caches per host. There are multiple client caches in BE, but currently we use the same cache size configuration. If necessary, use different configurations to set up different client-side caches
-
-### `max_base_compaction_threads`
-
-* Type: int32
-* Description: The maximum of thread number in base compaction thread pool.
-* Default value: 4
-
-### `max_cumu_compaction_threads`
-
-* Type: int32
-* Description: The maximum of thread number in cumulative compaction thread pool.
-* Default value: 10
-
-### `max_consumer_num_per_group`
-
-Default: 3
-
-The maximum number of consumers in a data consumer group, used for routine load
-
-### `min_cumulative_compaction_num_singleton_deltas`
-
-Default: 5
-
-Cumulative compaction strategy: the minimum number of incremental files
-
-### `max_cumulative_compaction_num_singleton_deltas`
-
-Default: 1000
-
-Cumulative compaction strategy: the maximum number of incremental files
-
-### `max_download_speed_kbps`
-
-Default: 50000 (KB/s)
-
-Maximum download speed limit
-
-### `max_free_io_buffers`
-
-Default: 128
-
-For each io buffer size, the maximum number of buffers that IoMgr will reserve ranges from 1024B to 8MB buffers, up to about 2GB buffers.
-
-### `max_garbage_sweep_interval`
-
-Default: 3600
-
-The maximum interval for disk garbage cleaning, the default is one hour
-
-### `max_memory_sink_batch_count`
-
-Default: 20
-
-The maximum external scan cache batch count, which means that the cache max_memory_cache_batch_count * batch_size row, the default is 20, and the default value of batch_size is 1024, which means that 20 * 1024 rows will be cached
-
-### `max_percentage_of_error_disk`
-
-* Type: int32
-* Description: The storage engine allows the percentage of damaged hard disks to exist. After the damaged hard disk exceeds the changed ratio, BE will automatically exit.
-* Default value: 0
-
-### `max_pushdown_conditions_per_column`
-
-* Type: int
-* Description: Used to limit the maximum number of conditions that can be pushed down to the storage engine for a single column in a query request. During the execution of the query plan, the filter conditions on some columns can be pushed down to the storage engine, so that the index information in the storage engine can be used for data filtering, reducing the amount of data that needs to be scanned by the query. Such as equivalent conditions, conditions in IN predicates, etc. In most  [...]
-* Default value: 1024
-
-* Example
-
-    The table structure is `id INT, col2 INT, col3 varchar (32), ...`.
-
-    The query is `... WHERE id IN (v1, v2, v3, ...)`
-
-    If the number of conditions in the IN predicate exceeds the configuration, try to increase the configuration value and observe whether the query response has improved.
-
-### `max_runnings_transactions_per_txn_map`
-
-Default: 100
-
-Max number of txns for every txn_partition_map in txn manager, this is a self protection to avoid too many txns saving in manager
-
-### `max_send_batch_parallelism_per_job`
-
-* Type: int
-* Description: Max send batch parallelism for OlapTableSink. The value set by the user for `send_batch_parallelism` is not allowed to exceed `max_send_batch_parallelism_per_job`, if exceed, the value of `send_batch_parallelism` would be `max_send_batch_parallelism_per_job`.
-* Default value: 5
-
-### `max_tablet_num_per_shard`
-
-Default: 1024
-
-The number of sliced tablets, plan the layout of the tablet, and avoid too many tablet subdirectories in the repeated directory
-
-### `max_tablet_version_num`
-
-* Type: int
-* Description: Limit the number of versions of a single tablet. It is used to prevent a large number of version accumulation problems caused by too frequent import or untimely compaction. When the limit is exceeded, the import task will be rejected.
-* Default value: 500
-
-### `mem_limit`
-
-* Type: string
-* Description: Limit the percentage of the server's maximum memory used by the BE process. It is used to prevent BE memory from occupying to many the machine's memory. This parameter must be greater than 0. When the percentage is greater than 100%, the value will default to 100%.
-* Default value: 80%
-
-### `memory_limitation_per_thread_for_schema_change`
-
-Default: 2 (G)
-
-Maximum memory allowed for a single schema change task
-
-### `memory_maintenance_sleep_time_s`
-
-Default: 10
-
-Sleep time (in seconds) between memory maintenance iterations
-
-### `memory_max_alignment`
-
-Default: 16
-
-Maximum alignment memory
-
-### `read_size`
-
-Default: 8388608
-
-The read size is the read size sent to the os. There is a trade-off between latency and the whole process, getting to keep the disk busy but not introducing seeks. For 8 MB reads, random io and sequential io have similar performance
-
-### `min_buffer_size`
-
-Default: 1024
-
-Minimum read buffer size (in bytes)
-
-### `min_compaction_failure_interval_sec`
-
-* Type: int32
-* Description: During the cumulative compaction process, when the selected tablet fails to be merged successfully, it will wait for a period of time before it may be selected again. The waiting period is the value of this configuration.
-* Default value: 600
-* Unit: seconds
-
-### `min_compaction_threads`
-
-* Type: int32
-* Description: The minimum of thread number in compaction thread pool.
-* Default value: 10
-
-### `min_file_descriptor_number`
-
-Default: 60000
-
-The lower limit required by the file handle limit of the BE process
-
-### `min_garbage_sweep_interval`
-
-Default: 180
-
-The minimum interval between disk garbage cleaning, time seconds
-
-### `mmap_buffers`
-
-Default: false
-
-Whether to use mmap to allocate memory, not used by default
-
-### `num_cores`
-
-* Type: int32
-* Description: The number of CPU cores that BE can use. When the value is 0, BE will obtain the number of CPU cores of the machine from /proc/cpuinfo.
-* Default value: 0
-
-### `num_disks`
-
-Defalut: 0
-
-Control the number of disks on the machine. If it is 0, it comes from the system settings
-
-### `num_threads_per_core`
-
-Default: 3
-
-Control the number of threads that each core runs. Usually choose 2 times or 3 times the number of cores. This keeps the core busy without causing excessive jitter
-
-### `num_threads_per_disk`
-
-Default: 0
-
-The maximum number of threads per disk is also the maximum queue depth of each disk
-
-### `number_tablet_writer_threads`
-
-Default: 16
-
-Number of tablet write threads
-
-### `path_gc_check`
-
-Default: true
-
-Whether to enable the recycle scan data thread check, it is enabled by default
-
-### `path_gc_check_interval_second`
-
-Default: 86400
-
-Recycle scan data thread check interval, in seconds
-
-### `path_gc_check_step`
-
-Default: 1000
-
-### `path_gc_check_step_interval_ms`
-
-Default: 10 (ms)
-
-### `path_scan_interval_second`
-
-Default: 86400
-
-### `pending_data_expire_time_sec`
-
-Default: 1800 
-
-The maximum duration of unvalidated data retained by the storage engine, the default unit: seconds
-
-### `periodic_counter_update_period_ms`
-
-Default: 500
-
-Update rate counter and sampling counter cycle, default unit: milliseconds
-
-### `plugin_path`
-
-Default: ${DORIS_HOME}/plugin
-
-pliugin path
-
-### `port`
-
-* Type: int32
-* Description: The port used in UT. Meaningless in the actual environment and can be ignored.
-* Default value: 20001
-
-### `pprof_profile_dir`
-
-Default : ${DORIS_HOME}/log
-
-pprof profile save directory
-
-### `priority_networks`
-
-Default: empty
-
-Declare a selection strategy for those servers with many IPs. Note that at most one ip should match this list. This is a semicolon-separated list in CIDR notation, such as 10.10.10.0/24. If there is no IP matching this rule, one will be randomly selected
-
-### `priority_queue_remaining_tasks_increased_frequency`
-
-Default: 512
-
- the increased frequency of priority for remaining tasks in BlockingPriorityQueue
-
-### `publish_version_worker_count`
-
-Default: 8
-
-the count of thread to publish version
-
-### `pull_load_task_dir`
-
-Default: ${DORIS_HOME}/var/pull_load
-
-Pull the directory of the laod task
-
-### `push_worker_count_high_priority`
-
-Default: 3
-
-Import the number of threads for processing HIGH priority tasks
-
-### `push_worker_count_normal_priority`
-
-Default: 3
-
-Import the number of threads for processing NORMAL priority tasks
-
-### `push_write_mbytes_per_sec`
-
-+ Type: int32
-+ Description: Load data speed control, the default is 10MB per second. Applicable to all load methods.
-+ Unit: MB
-+ Default value: 10
-
-### `query_scratch_dirs`
-
-+ Type: string
-+ Description: The directory selected by BE to store temporary data during spill to disk. which is similar to the storage path configuration, multiple directories are separated by ;.
-+ Default value: ${DORIS_HOME}
-
-### `release_snapshot_worker_count`
-
-Default: 5
-
-Number of threads releasing snapshots
-
-### `report_disk_state_interval_seconds`
-
-Default: 60
-
-The interval time for the agent to report the disk status to FE, unit (seconds)
-
-### `report_tablet_interval_seconds`
-
-Default: 60
-
-The interval time for the agent to report the olap table to the FE, in seconds
-
-### `report_task_interval_seconds`
-
-Default: 10
-
-The interval time for the agent to report the task signature to FE, unit (seconds)
-
-### `result_buffer_cancelled_interval_time`
-
-Default: 300
-
-Result buffer cancellation time (unit: second)
-
-### `routine_load_thread_pool_size`
-
-Default: 10
-
-The thread pool size of the routine load task. This should be greater than the FE configuration'max_concurrent_task_num_per_be' (default 5)
-
-### `row_nums_check`
-
-Default: true
-
-Check row nums for BE/CE and schema change. true is open, false is closed
-
-### `row_step_for_compaction_merge_log`
-
-* Type: int64
-* Description: Merge log will be printed for each "row_step_for_compaction_merge_log" rows merged during compaction. If the value is set to 0, merge log will not be printed.
-* Default value: 0
-* Dynamically modify: true
-
-### `scan_context_gc_interval_min`
-
-Default: 5
-
-This configuration is used for the context gc thread scheduling cycle. Note: The unit is minutes, and the default is 5 minutes
-
-### `send_batch_thread_pool_thread_num`
-
-* Type: int32
-* Description: The number of threads in the SendBatch thread pool. In NodeChannels' sending data tasks, the SendBatch operation of each NodeChannel will be submitted as a thread task to the thread pool to be scheduled. This parameter determines the size of the SendBatch thread pool.
-* Default value: 256
-
-### `send_batch_thread_pool_queue_size`
-
-* Type: int32
-* Description: The queue length of the SendBatch thread pool. In NodeChannels' sending data tasks,  the SendBatch operation of each NodeChannel will be submitted as a thread task to the thread pool waiting to be scheduled, and after the number of submitted tasks exceeds the length of the thread pool queue, subsequent submitted tasks will be blocked until there is a empty slot in the queue.
-
-### `sleep_one_second`
-
-+ Type: int32
-+ Description: Global variables, used for BE thread sleep for 1 seconds, should not be modified
-+ Default value: 1
-
-### `small_file_dir`
-
-Default: ${DORIS_HOME}/lib/small_file/
-
-Directory for saving files downloaded by SmallFileMgr
-
-### `snapshot_expire_time_sec`
-
-Default: 172800
-
-Snapshot file cleaning interval, default value: 48 hours
-
-### `status_report_interval`
-
-Default: 5
-
-Interval between profile reports; unit: seconds
-
-### `storage_flood_stage_left_capacity_bytes`
-
-Default: 1073741824
-
-The min bytes that should be left of a data dir,default value:1G
-
-### `storage_flood_stage_usage_percent`
-
-Default: 95 (95%)
-
-The storage_flood_stage_usage_percent and storage_flood_stage_left_capacity_bytes configurations limit the maximum usage of the capacity of the data directory.
-
-### `storage_medium_migrate_count`
-
-Default: 1
-
-the count of thread to clone
-
-### `storage_page_cache_limit`
-
-Default: 20%
-
-Cache for storage page size
-
-### `storage_page_cache_shard_size`
-
-Default: 16
-
-Shard size of StoragePageCache, the value must be power of two. It's recommended to set it to a value close to the number of BE cores in order to reduce lock contentions.
-
-### `index_page_cache_percentage`
-* Type: int32
-* Description: Index page cache as a percentage of total storage page cache, value range is [0, 100]
-* Default value: 10
-
-### `storage_root_path`
-
-* Type: string
-
-* Description: data root path, separate by ';'.you can specify the storage medium of each root path, HDD or SSD. you can add capacity limit at the end of each root path, separate by ','.  
-  If the user does not use a mix of SSD and HDD disks, they do not need to configure the configuration methods in Example 1 and Example 2 below, but only need to specify the storage directory; they also do not need to modify the default storage media configuration of FE.  
-
-    eg.1: `storage_root_path=/home/disk1/doris.HDD;/home/disk2/doris.SSD;/home/disk2/doris`
-
-    * /home/disk1/doris.HDD : The storage medium is HDD;
-    * /home/disk2/doris.SSD : The storage medium is SSD;
-    * /home/disk2/doris : The storage medium is HDD HDD(default)
-  
-    eg.2: `storage_root_path=/home/disk1/doris,medium:hdd;/home/disk2/doris,medium:ssd`
-  
-    * /home/disk1/doris,medium:hdd   The storage medium is HDD;
-    * /home/disk2/doris,medium:ssd    The storage medium is SSD;
-
-* Default: ${DORIS_HOME}
-
-### `storage_strict_check_incompatible_old_format`
-* Type: bool
-* Description: Used to check incompatible old format strictly
-* Default value: true
-* Dynamically modify: false
-
-This config is used to check incompatible old format hdr_ format whether doris uses strict way. When config is true, 
-process will log fatal and exit. When config is false, process will only log warning.
-
-### `streaming_load_max_mb`
-
-* Type: int64
-* Description: Used to limit the maximum amount of csv data allowed in one Stream load. The unit is MB.
-* Default value: 10240
-* Dynamically modify: yes
-
-Stream Load is generally suitable for loading data less than a few GB, not suitable for loading` too large data.
-
-### `streaming_load_json_max_mb`
-
-* Type: int64
-* Description: it is used to limit the maximum amount of json data allowed in one Stream load. The unit is MB.
-* Default value: 100
-* Dynamically modify: yes
-
-Some data formats, such as JSON, cannot be split. Doris must read all the data into the memory before parsing can begin. Therefore, this value is used to limit the maximum amount of data that can be loaded in a single Stream load.
-
-### `streaming_load_rpc_max_alive_time_sec`
-
-Default: 1200
-
-The lifetime of TabletsChannel. If the channel does not receive any data at this time, the channel will be deleted, unit: second
-
-### `sync_tablet_meta`
-
-Default: false
-
-Whether the storage engine opens sync and keeps it to the disk
-
-### `sys_log_dir`
-
-* Type: string
-* Description: Storage directory of BE log data
-* Default: ${DORIS_HOME}/log
-
-### `sys_log_level`
-
-INFO
-
-Log Level: INFO < WARNING < ERROR < FATAL
-
-### `sys_log_roll_mode`
-
-Default: SIZE-MB-1024
-
-The size of the log split, one log file is split every 1G
-
-### `sys_log_roll_num`
-
-Default: 10
-
-Number of log files kept
-
-### `sys_log_verbose_level`
-
-Defaultl: 10
-
-Log display level, used to control the log output at the beginning of VLOG in the code
-
-### `sys_log_verbose_modules`
-
-Default: empty
-
-Log printing module, writing olap will only print the log under the olap module
-
-### `tablet_map_shard_size`
-
-Default: 1
-
-tablet_map_lock fragment size, the value is 2^n, n=0,1,2,3,4, this is for better tablet management
-
-### `tablet_meta_checkpoint_min_interval_secs`
-
-Default: 600(s)
-
-The polling interval of the TabletMeta Checkpoint thread
-
-### `tablet_meta_checkpoint_min_new_rowsets_num`
-
-### `tablet_scan_frequency_time_node_interval_second`
-
-* Type: int64
-* Description: Time interval to record the metric 'query_scan_count' and timestamp in second for the purpose of  calculating tablet scan frequency during a latest period of time at the present.
-* Default: 300
-
-### `tablet_stat_cache_update_interval_second`
-
-default: 10
-
-The minimum number of Rowsets for TabletMeta Checkpoint
-
-### `tablet_rowset_stale_sweep_time_sec`
-
-* Type: int64
-* Description: It is used to control the expiration time of cleaning up the merged rowset version. When the current time now() minus the max created rowset‘s create time in a version path is greater than tablet_rowset_stale_sweep_time_sec, the current path is cleaned up and these merged rowsets are deleted, the unit is second.
-* Default: 1800
-
-When writing is too frequent and the disk time is insufficient, you can configure less tablet_rowset_stale_sweep_time_sec. However, if this time is less than 5 minutes, it may cause fe to query the version that has been merged, causing a query -230 error.
-
-### `tablet_writer_open_rpc_timeout_sec`
-
-Default: 300
-
-Update interval of tablet state cache, unit: second
-
-The RPC timeout for sending a Batch (1024 lines) during import. The default is 60 seconds. Since this RPC may involve writing multiple batches of memory, the RPC timeout may be caused by writing batches, so this timeout can be adjusted to reduce timeout errors (such as send batch fail errors). Also, if you increase the write_buffer_size configuration, you need to increase this parameter as well.
-
-### `tablet_writer_ignore_eovercrowded`
-
-* Type: bool
-* Description: Used to ignore brpc error '[E1011]The server is overcrowded' when writing data. 
-* Default value: false
-
-When meet '[E1011]The server is overcrowded' error, you can tune the configuration `brpc_socket_max_unwritten_bytes`, but it can't be modified at runtime. Set it to `true` to avoid writing failed temporarily. Notice that, it only effects `write`, other rpc requests will still check if overcrowded.
-
-### `tc_free_memory_rate`
-
-Default: 20   (%)
-
-Available memory, value range: [0-100]
-
-### `tc_max_total_thread_cache_bytes`
-
-* Type: int64
-* Description: Used to limit the total thread cache size in tcmalloc. This limit is not a hard limit, so the actual thread cache usage may exceed this limit. For details, please refer to [TCMALLOC\_MAX\_TOTAL\_THREAD\_CACHE\_BYTES](https://gperftools.github.io/gperftools/tcmalloc.html)
-* Default: 1073741824
-
-If the system is found to be in a high-stress scenario and a large number of threads are found in the tcmalloc lock competition phase through the BE thread stack, such as a large number of `SpinLock` related stacks, you can try increasing this parameter to improve system performance. [Reference](https://github.com/gperftools/gperftools/issues/1111)
-
-### `tc_use_memory_min`
-
-Default: 10737418240
-
-The minimum memory of TCmalloc, when the memory used is less than this, it is not returned to the operating system
-
-### `thrift_client_retry_interval_ms`
-
-* Type: int64
-* Description: Used to set retry interval for thrift client in be to avoid avalanche disaster in fe thrift server, the unit is ms.
-* Default: 1000
-
-### `thrift_connect_timeout_seconds`
-
-Default: 3
-
-The default thrift client connection timeout time (unit: seconds)
-
-### `thrift_rpc_timeout_ms`
-
-Default: 5000
-
-thrift default timeout time, default: 5 seconds
-
-### `thrift_server_type_of_fe`
-
-This configuration indicates the service model used by FE's Thrift service. The type is string and is case-insensitive. This parameter needs to be consistent with the setting of fe's thrift_server_type parameter. Currently there are two values for this parameter, `THREADED` and `THREAD_POOL`.
-
-If the parameter is `THREADED`, the model is a non-blocking I/O model,
-
-If the parameter is `THREAD_POOL`, the model is a blocking I/O model.
-
-### `total_permits_for_compaction_score`
-
-* Type: int64
-* Description: The upper limit of "permits" held by all compaction tasks. This config can be set to limit memory consumption for compaction.
-* Default: 10000
-* Dynamically modify: true
-
-### `trash_file_expire_time_sec`
-
-Default: 259200
-
-The interval for cleaning the recycle bin is 72 hours. When the disk space is insufficient, the file retention period under trash may not comply with this parameter
-
-### `txn_commit_rpc_timeout_ms`
-
-Default: 10000
-
-txn submit rpc timeout, the default is 10 seconds
-
-### `txn_map_shard_size`
-
-Default: 128
-
-txn_map_lock fragment size, the value is 2^n, n=0,1,2,3,4. This is an enhancement to improve the performance of managing txn
-
-### `txn_shard_size`
-
-Default: 1024
-
-txn_lock shard size, the value is 2^n, n=0,1,2,3,4, this is an enhancement function that can improve the performance of submitting and publishing txn
-
-### `unused_rowset_monitor_interval`
-
-Default: 30
-
-Time interval for clearing expired Rowset, unit: second
-
-### `upload_worker_count`
-
-Default: 1
-
-Maximum number of threads for uploading files
-
-### `use_mmap_allocate_chunk`
-
-Default: false
-
-Whether to use mmap to allocate blocks. If you enable this feature, it is best to increase the value of vm.max_map_count, its default value is 65530. You can use "sysctl -w vm.max_map_count=262144" or "echo 262144> /proc/sys/vm/max_map_count" to operate max_map_count as root. When this setting is true, you must set chunk_reserved_bytes_limit to a relatively low Big number, otherwise the performance is very very bad
-
-### `user_function_dir`
-
-${DORIS_HOME}/lib/udf
-
-udf function directory
-
-### `webserver_num_workers`
-
-Default: 48
-
-Webserver default number of worker threads
-
-### `webserver_port`
-
-* Type: int32
-* Description: Service port of http server on BE
-* Default: 8040
-
-### `write_buffer_size`
-
-Default: 104857600
-
-The size of the buffer before flashing
-
-Imported data is first written to a memory block on the BE, and only written back to disk when this memory block reaches the threshold. The default size is 100MB. too small a threshold may result in a large number of small files on the BE. This threshold can be increased to reduce the number of files. However, too large a threshold may cause RPC timeouts, see the configuration notes below.
-
-### `zone_map_row_num_threshold`
-
-* Type: int32
-* Description: If the number of rows in a page is less than this value, no zonemap will be created to reduce data expansion
-* Default: 20
-
-### `aws_log_level`
-
-* Type: int32
-
-* Description: log level of AWS SDK, 
-  ```
-     Off = 0,
-     Fatal = 1,
-     Error = 2,
-     Warn = 3,
-     Info = 4,
-     Debug = 5,
-     Trace = 6
-  ```
-  
-* Default: 3
-
-### `enable_tcmalloc_hook`
-
-* Type: bool
-* Description: Whether Hook TCmalloc new/delete, currently consume/release tls mem tracker in Hook.
-* Default: true
-
-### `mem_tracker_consume_min_size_bytes`
-
-* Type: int32
-* Description: The minimum length of TCMalloc Hook when consume/release MemTracker. Consume size smaller than this value will continue to accumulate to avoid frequent calls to consume/release of MemTracker. Decreasing this value will increase the frequency of consume/release. Increasing this value will cause MemTracker statistics to be inaccurate. Theoretically, the statistical value of a MemTracker differs from the true value = ( mem_tracker_consume_min_size_bytes * the number of BE thr [...]
-* Default: 1048576
-
-### `max_segment_num_per_rowset`
-
-* Type: int32
-* Description: Used to limit the number of segments in the newly generated rowset when importing. If the threshold is exceeded, the import will fail with error -238. Too many segments will cause compaction to take up a lot of memory and cause OOM errors.
-* Default value: 200
-
-### `remote_storage_read_buffer_mb`
-
-* Type: int32
-* Description: The cache size used when reading files on hdfs or object storage.
-* Default value: 16MB
-
-Increasing this value can reduce the number of calls to read remote data, but it will increase memory overhead.
-
-### `external_table_connect_timeout_sec`
-
-* Type: int32
-* Description: The timeout when establishing connection with external table such as ODBC table.
-* Default value: 5 seconds
-
-### `segment_cache_capacity`
-
-* Type: int32
-* Description: The maximum number of Segments cached by Segment Cache.
-* Default value: 1000000
-
-The default value is currently only an empirical value, and may need to be modified according to actual scenarios. Increasing this value can cache more segments and avoid some IO. Decreasing this value will reduce memory usage.
-
-### `auto_refresh_brpc_channel`
-
-* Type: bool
-* Description: When obtaining a brpc connection, judge the availability of the connection through hand_shake rpc, and re-establish the connection if it is not available 。
-* Default value: false
-
-### `high_priority_flush_thread_num_per_store`
-
-* Type: int32
-* Description: The number of flush threads per store path allocated for the high priority import task.
-* Default value: 1
-
-### `routine_load_consumer_pool_size`
-
-* Type: int32
-* Description: The number of caches for the data consumer used by the routine load.
-* Default: 10
-
-### `load_task_high_priority_threshold_second`
-
-* Type: int32
-* Description: When the timeout of an import task is less than this threshold, Doris will consider it to be a high priority task. High priority tasks use a separate pool of flush threads.
-* Default: 120
-
-### `min_load_rpc_timeout_ms`
-
-* Type: int32
-* Description: The minimum timeout for each rpc in the load job.
-* Default: 20
-
-Translated with www.DeepL.com/Translator (free version)
-
-### `doris_scan_range_max_mb`
-* Type: int32
-* Description: The maximum amount of data read by each OlapScanner.
-* Default: 1024
-
-### `enable_quick_compaction`
-* Type: bool
-* Description: enable quick compaction,It is mainly used in the scenario of frequent import of small amount of data. The problem of -235 can be effectively avoided by merging the imported versions in time through the mechanism of rapid compaction. The definition of small amount of data is currently defined according to the number of rows
-* Default: false
-
-### `quick_compaction_max_rows`
-* Type: int32
-* Description: When the number of imported rows is less than this value, it is considered that this import is an import of small amount of data, which will be selected during quick compaction
-* Default: 1000
-
-### `quick_compaction_batch_size`
-* Type: int32
-* Description: trigger time, when import times reach quick_compaction_batch_size will trigger immediately 
-* Default: 10
-
-### `quick_compaction_min_rowsets`
-* Type: int32
-* Description: at least the number of versions to be compaction, and the number of rowsets with a small amount of data in the selection. If it is greater than this value, the real compaction will be carried out
-* Default: 10
-
diff --git a/docs/admin-manual/config/fe-config.md b/docs/admin-manual/config/fe-config.md
deleted file mode 100644
index 6e0eaf4b728..00000000000
--- a/docs/admin-manual/config/fe-config.md
+++ /dev/null
@@ -1,2173 +0,0 @@
----
-{
-    "title": "FE Configuration",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-<!-- Please sort the configuration alphabetically -->
-
-# FE Configuration
-
-This document mainly introduces the relevant configuration items of FE.
-
-The FE configuration file `fe.conf` is usually stored in the `conf/` directory of the FE deployment path. In version 0.14, another configuration file `fe_custom.conf` will be introduced. The configuration file is used to record the configuration items that are dynamically configured and persisted by the user during operation.
-
-After the FE process is started, it will read the configuration items in `fe.conf` first, and then read the configuration items in `fe_custom.conf`. The configuration items in `fe_custom.conf` will overwrite the same configuration items in `fe.conf`.
-
-The location of the `fe_custom.conf` file can be configured in `fe.conf` through the `custom_config_dir` configuration item.
-
-## View configuration items
-
-There are two ways to view the configuration items of FE:
-
-1. FE web page
-
-    Open the FE web page `http://fe_host:fe_http_port/variable` in the browser. You can see the currently effective FE configuration items in `Configure Info`.
-
-2. View by command
-
-    After the FE is started, you can view the configuration items of the FE in the MySQL client with the following command:
-
-    `ADMIN SHOW FRONTEND CONFIG;`
-
-    The meanings of the columns in the results are as follows:
-
-    * Key: the name of the configuration item.
-    * Value: The value of the current configuration item.
-    * Type: The configuration item value type, such as integer or string.
-    * IsMutable: whether it can be dynamically configured. If true, the configuration item can be dynamically configured at runtime. If false, it means that the configuration item can only be configured in `fe.conf` and takes effect after restarting FE.
-    * MasterOnly: Whether it is a unique configuration item of Master FE node. If it is true, it means that the configuration item is meaningful only at the Master FE node, and is meaningless to other types of FE nodes. If false, it means that the configuration item is meaningful in all types of FE nodes.
-    * Comment: The description of the configuration item.
-
-## Set configuration items
-
-There are two ways to configure FE configuration items:
-
-1. Static configuration
-
-    Add and set configuration items in the `conf/fe.conf` file. The configuration items in `fe.conf` will be read when the FE process starts. Configuration items not in `fe.conf` will use default values.
-
-2. Dynamic configuration via MySQL protocol
-
-    After the FE starts, you can set the configuration items dynamically through the following commands. This command requires administrator privilege.
-
-    `ADMIN SET FRONTEND CONFIG (" fe_config_name "=" fe_config_value ");`
-
-    Not all configuration items support dynamic configuration. You can check whether the dynamic configuration is supported by the `IsMutable` column in the` ADMIN SHOW FRONTEND CONFIG; `command result.
-
-    If the configuration item of `MasterOnly` is modified, the command will be directly forwarded to the Master FE and only the corresponding configuration item in the Master FE will be modified.
-
-    **Configuration items modified in this way will become invalid after the FE process restarts.**
-
-    For more help on this command, you can view it through the `HELP ADMIN SET CONFIG;` command.
-    
-3. Dynamic configuration via HTTP protocol
-
-    For details, please refer to [Set Config Action](../http-actions/fe/set-config-action.md)
-
-    This method can also persist the modified configuration items. The configuration items will be persisted in the `fe_custom.conf` file and will still take effect after FE is restarted.
-
-## Examples
-
-1. Modify `async_pending_load_task_pool_size`
-
-    Through `ADMIN SHOW FRONTEND CONFIG;` you can see that this configuration item cannot be dynamically configured (`IsMutable` is false). You need to add in `fe.conf`:
-
-    `async_pending_load_task_pool_size = 20`
-
-    Then restart the FE process to take effect the configuration.
-
-2. Modify `dynamic_partition_enable`
-
-    Through `ADMIN SHOW FRONTEND CONFIG;` you can see that the configuration item can be dynamically configured (`IsMutable` is true). And it is the unique configuration of Master FE. Then first we can connect to any FE and execute the following command to modify the configuration:
-
-    ```
-    ADMIN SET FRONTEND CONFIG ("dynamic_partition_enable" = "true"); `
-    ```
-
-    Afterwards, you can view the modified value with the following command:
-
-    ```
-    set forward_to_master = true;
-    ADMIN SHOW FRONTEND CONFIG;
-    ```
-
-    After modification in the above manner, if the Master FE restarts or a Master election is performed, the configuration will be invalid. You can add the configuration item directly in `fe.conf` and restart the FE to make the configuration item permanent.
-
-3. Modify `max_distribution_pruner_recursion_depth`
-
-    Through `ADMIN SHOW FRONTEND CONFIG;` you can see that the configuration item can be dynamically configured (`IsMutable` is true). It is not unique to Master FE.
-
-    Similarly, we can modify the configuration by dynamically modifying the configuration command. Because this configuration is not unique to the Master FE, user need to connect to different FEs separately to modify the configuration dynamically, so that all FEs use the modified configuration values.
-
-## Configurations
-
-### max_dynamic_partition_num
-
-Default:500
-
-IsMutable:true
-
-MasterOnly:true
-
-Used to limit the maximum number of partitions that can be created when creating a dynamic partition table,  to avoid creating too many partitions at one time. The number is determined by "start" and "end" in the dynamic partition parameters.. 
-
-### grpc_max_message_size_bytes
-
-Default:1G
-
-Used to set the initial flow window size of the GRPC client channel, and also used to max message size.  When the result set is large, you may need to increase this value.
-
-### min_replication_num_per_tablet
-
-Default: 1
-
-Used to set minimal number of replication per tablet.
-
-### max_replication_num_per_tablet
-
-Default: 32767
-
-Used to set maximal number of replication per tablet.
-
-### enable_outfile_to_local
-
-Default:false
-
-Whether to allow the outfile function to export the results to the local disk.
-
-### enable_access_file_without_broker
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-This config is used to try skip broker when access bos or other cloud storage via broker
-
-### enable_bdbje_debug_mode
-
-Default:false
-
-If set to true, FE will be started in BDBJE debug mode
-
-### enable_http_server_v2
-
-Default:The default is true after the official 0.14.0 version is released, and the default is false before
-
-HTTP Server V2 is implemented by SpringBoot. It uses an architecture that separates the front and back ends. Only when httpv2 is enabled can users use the new front-end UI interface.
-
-### jetty_server_acceptors
-
-Default:2
-
-### jetty_server_selectors
-
-Default:4
-
-### jetty_server_workers
-
-Default:0
-
-With the above three parameters, Jetty's thread architecture model is very simple, divided into acceptors, selectors and workers three thread pools. Acceptors are responsible for accepting new connections, and then hand them over to selectors to process the unpacking of the HTTP message protocol, and finally workers process the request. The first two thread pools adopt a non-blocking model, and one thread can handle the read and write of many sockets, so the number of thread pools is small.
-
-For most projects, only 1-2 acceptors threads are required, and 2 to 4 selectors threads are sufficient. Workers are obstructive business logic, often have more database operations, and require a large number of threads. The specific number depends on the proportion of QPS and IO events of the application. The higher the QPS, the more threads are required, the higher the proportion of IO, the more threads waiting, and the more total threads required.
-
-Worker thread pool is not set by default, set according to your needs
-
-
-### jetty_server_max_http_post_size
-
-Default:`100 * 1024 * 1024`  (100MB)
-
-This is the maximum number of bytes of the file uploaded by the put or post method, the default value: 100MB
-
-### jetty_server_max_http_header_size
-
-Default:10240  (10K)
-
-http header size configuration parameter, the default value is 10K
-
-### frontend_address
-
-Status: Deprecated, not recommended use. This parameter may be deleted later Type: string Description: Explicitly set the IP address of FE instead of using *InetAddress.getByName* to get the IP address. Usually in *InetAddress.getByName* When the expected results cannot be obtained. Only IP address is supported, not hostname. Default value: 0.0.0.0
-
-### default_max_filter_ratio
-
-Default:0
-
-IsMutable:true
-
-MasterOnly:true
-
-Maximum percentage of data that can be filtered (due to reasons such as data is irregularly) , The default value is 0.
-
-### default_db_data_quota_bytes
-
-Default:1PB
-
-IsMutable:true
-
-MasterOnly:true
-
-Used to set the default database data quota size. To set the quota size of a single database, you can use:
-
-```
-Set the database data quota, the unit is:B/K/KB/M/MB/G/GB/T/TB/P/PB
-ALTER DATABASE db_name SET DATA QUOTA quota;
-View configuration
-show data (Detail:HELP SHOW DATA)
-```
-
-### default_db_replica_quota_size
-
-Default: 1073741824
-
-IsMutable:true
-
-MasterOnly:true
-
-Used to set the default database replica quota. To set the quota size of a single database, you can use: 
-
-```
-Set the database replica quota
-ALTER DATABASE db_name SET REPLICA QUOTA quota;
-View configuration
-show data (Detail:HELP SHOW DATA)
-```
-
-### enable_batch_delete_by_default
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-Whether to add a delete sign column when create unique table
-
-### recover_with_empty_tablet
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
- In some very special circumstances, such as code bugs, or human misoperation, etc., all replicas of some tablets may be lost. In this case, the data has been substantially lost. However, in some scenarios, the business still hopes to ensure that the query will not report errors even if there is data loss, and reduce the perception of the user layer. At this point, we can use the blank Tablet to fill the missing replica to ensure that the query can be executed normally.
-
-Set to true so that Doris will automatically use blank replicas to fill tablets which all replicas have been damaged or missing
-
-### max_allowed_in_element_num_of_delete
-
-Default:1024
-
-IsMutable:true
-
-MasterOnly:true
-
-This configuration is used to limit element num of InPredicate in delete statement.
-
-### cache_result_max_row_count
-
-Default:3000
-
-IsMutable:true
-
-MasterOnly:false
-
-In order to avoid occupying too much memory, the maximum number of rows that can be cached is 2000 by default. If this threshold is exceeded, the cache cannot be set
-
-### cache_last_version_interval_second
-
-Default:900
-
-IsMutable:true
-
-MasterOnly:false
-
-The time interval of the latest partitioned version of the table refers to the time interval between the data update and the current version. It is generally set to 900 seconds, which distinguishes offline and real-time import
-
-### cache_enable_partition_mode
-
-Default:true
-
-IsMutable:true
-
-MasterOnly:false
-
-When this switch is turned on, the query result set will be cached according to the partition. If the interval between the query table partition time and the query time is less than cache_last_version_interval_second, the result set will be cached according to the partition.
-
-Part of the data will be obtained from the cache and some data from the disk when querying, and the data will be merged and returned to the client.
-
-### cache_enable_sql_mode
-
-Default:true
-
-IsMutable:true
-
-MasterOnly:false
-
-If this switch is turned on, the SQL query result set will be cached. If the interval between the last visit version time in all partitions of all tables in the query is greater than cache_last_version_interval_second, and the result set is less than cache_result_max_row_count, the result set will be cached, and the next same SQL will hit the cache
-
-If set to true, fe will enable sql result caching. This option is suitable for offline data update scenarios
-
-|                        | case1 | case2 | case3 | case4 |
-| ---------------------- | ----- | ----- | ----- | ----- |
-| enable_sql_cache       | false | true  | true  | false |
-| enable_partition_cache | false | false | true  | true  |
-
-### min_clone_task_timeout_sec  和 max_clone_task_timeout_sec
-
-Default:Minimum 3 minutes, maximum two hours
-
-IsMutable:true
-
-MasterOnly:true
-
-Type: long Description: Used to control the maximum timeout of a clone task. The unit is second. Default value: 7200 Dynamic modification: yes
-
-Can cooperate with `mix_clone_task_timeout_sec` to control the maximum and minimum timeout of a clone task. Under normal circumstances, the timeout of a clone task is estimated by the amount of data and the minimum transfer rate (5MB/s). In some special cases, these two configurations can be used to set the upper and lower bounds of the clone task timeout to ensure that the clone task can be completed successfully.
-
-### agent_task_resend_wait_time_ms
-
-Default:5000
-
-IsMutable:true
-
-MasterOnly:true
-
-This configuration will decide whether to resend agent task when create_time for agent_task is set, only when current_time - create_time > agent_task_resend_wait_time_ms can ReportHandler do resend agent task.
-
-This configuration is currently mainly used to solve the problem of repeated sending of `PUBLISH_VERSION` agent tasks. The current default value of this configuration is 5000, which is an experimental value.
-
-Because there is a certain time delay between submitting agent tasks to AgentTaskQueue and submitting to be, Increasing the value of this configuration can effectively solve the problem of repeated sending of agent tasks,
-
-But at the same time, it will cause the submission of failed or failed execution of the agent task to be executed again for an extended period of time
-
-### enable_odbc_table
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-Whether to enable the ODBC table, it is not enabled by default. You need to manually configure it when you use it. This parameter can be set by: ADMIN SET FRONTEND CONFIG("key"="value")
-
-### enable_spark_load
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-Whether to enable spark load temporarily, it is not enabled by default
-
-### disable_storage_medium_check
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-If disable_storage_medium_check is true, ReportHandler would not check tablet's storage medium and disable storage cool down function, the default value is false. You can set the value true when you don't care what the storage medium of the tablet is.
-
-### drop_backend_after_decommission
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-1. This configuration is used to control whether the system drops the BE after successfully decommissioning the BE. If true, the BE node will be deleted after the BE is successfully offline. If false, after the BE successfully goes offline, the BE will remain in the DECOMMISSION state, but will not be dropped.
-
-   This configuration can play a role in certain scenarios. Assume that the initial state of a Doris cluster is one disk per BE node. After running for a period of time, the system has been vertically expanded, that is, each BE node adds 2 new disks. Because Doris currently does not support data balancing among the disks within the BE, the data volume of the initial disk may always be much higher than the data volume of the newly added disk. At this time, we can perform manual inter-disk [...]
-
-   1. Set the configuration item to false.
-   2. Perform a decommission operation on a certain BE node. This operation will migrate all data on the BE to other nodes.
-   3. After the decommission operation is completed, the BE will not be dropped. At this time, cancel the decommission status of the BE. Then the data will start to balance from other BE nodes back to this node. At this time, the data will be evenly distributed to all disks of the BE.
-   4. Perform steps 2 and 3 for all BE nodes in sequence, and finally achieve the purpose of disk balancing for all nodes
-
-### period_of_auto_resume_min
-
-Default:5 (s)
-
-IsMutable:true
-
-MasterOnly:true
-
-Automatically restore the cycle of Routine load
-
-### max_tolerable_backend_down_num
-
-Default:0
-
-IsMutable:true
-
-MasterOnly:true
-
-As long as one BE is down, Routine Load cannot be automatically restored 
-
-### check_java_version
-
-Default:true
-
-Doris will check whether the compiled and run Java versions are compatible, if not, it will throw a Java version mismatch exception message and terminate the startup
-
-### max_running_rollup_job_num_per_table
-
-Default:1
-
-IsMutable:true
-
-MasterOnly:true
-
-Control the concurrency limit of Rollup jobs
-
-### dynamic_partition_enable
-
-Default:true
-
-IsMutable:true
-
-MasterOnly:true
-
-Whether to enable dynamic partition scheduler, enabled by default
-
-### dynamic_partition_check_interval_seconds
-
-Default:600 (s)
-
-IsMutable:true
-
-MasterOnly:true
-
-Decide how often to check dynamic partition
-
-### disable_cluster_feature
-
-Default:true
-
-IsMutable:true
-
-The multi cluster feature will be deprecated in version 0.12 ,set this config to true will disable all operations related to cluster feature, include:
-        create/drop cluster
-        add free backend/add backend to cluster/decommission cluster balance
-        change the backends num of cluster
-        link/migration db
-
-### force_do_metadata_checkpoint
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-If set to true, the checkpoint thread will make the checkpoint regardless of the jvm memory used percent
-
-### metadata_checkpoint_memory_threshold
-
-Default:60  (60%)
-
-IsMutable:true
-
-MasterOnly:true
-
- If the jvm memory used percent(heap or old mem pool) exceed this threshold, checkpoint thread will  not work to avoid OOM.
-
-### max_distribution_pruner_recursion_depth
-
-Default:100
-
-IsMutable:true
-
-MasterOnly:false
-
-This will limit the max recursion depth of hash distribution pruner.
-      eg: where a in (5 elements) and b in (4 elements) and c in (3 elements) and d in (2 elements).
-      a/b/c/d are distribution columns, so the recursion depth will be 5 * 4 * 3 * 2 = 120, larger than 100,
-      So that distribution pruner will no work and just return all buckets.
-      Increase the depth can support distribution pruning for more elements, but may cost more CPU.
-
-### max_backup_restore_job_num_per_db
-
-Default: 10
-
-This configuration is mainly used to control the number of backup/restore tasks recorded in each database.
-
-### using_old_load_usage_pattern
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-If set to true, the insert stmt with processing error will still return a label to user.  And user can use this label to check the load job's status. The default value is false, which means if insert operation encounter errors,  exception will be thrown to user client directly without load label.
-
-### small_file_dir
-
-Default:DORIS_HOME_DIR/small_files
-
-Save small files
-
-### max_small_file_size_bytes
-
-Default:1M
-
-IsMutable:true
-
-MasterOnly:true
-
-The max size of a single file store in SmallFileMgr
-
-### max_small_file_number
-
-Default:100
-
-IsMutable:true
-
-MasterOnly:true
-
-The max number of files store in SmallFileMgr
-
-### max_routine_load_task_num_per_be
-
-Default:5
-
-IsMutable:true
-
-MasterOnly:true
-
-the max concurrent routine load task num per BE.  This is to limit the num of routine load tasks sending to a BE, and it should also less than BE config 'routine_load_thread_pool_size'(default 10), which is the routine load task thread pool size on BE.
-
-### max_routine_load_task_concurrent_num
-
-Default:5
-
-IsMutable:true
-
-MasterOnly:true
-
-the max concurrent routine load task num of a single routine load job
-
-### max_routine_load_job_num
-
-Default:100
-
-the max routine load job num, including NEED_SCHEDULED, RUNNING, PAUSE
-
-### max_running_txn_num_per_db
-
-Default:100
-
-IsMutable:true
-
-MasterOnly:true
-
-This configuration is mainly used to control the number of concurrent load jobs of the same database.
-
-When there are too many load jobs running in the cluster, the newly submitted load jobs may report errors:
-
-```text
-current running txns on db xxx is xx, larger than limit xx
-```
-
-When this error is encountered, it means that the load jobs currently running in the cluster exceeds the configuration value. At this time, it is recommended to wait on the business side and retry the load jobs.
-
-Generally it is not recommended to increase this configuration value. An excessively high number of concurrency may cause excessive system load
-
-### enable_metric_calculator
-
-Default:true
-
-If set to true, metric collector will be run as a daemon timer to collect metrics at fix interval
-
-### report_queue_size
-
-Default: 100
-
-IsMutable:true
-
-MasterOnly:true
-
- This threshold is to avoid piling up too many report task in FE, which may cause OOM exception.  In some large Doris cluster, eg: 100 Backends with ten million replicas, a tablet report may cost  several seconds after some modification of metadata(drop partition, etc..). And one Backend will report tablets info every 1 min, so unlimited receiving reports is unacceptable. we will optimize the processing speed of tablet report in future, but now, just discard the report if queue size exce [...]
-    Some online time cost:
-       1. disk report: 0-1 msta
-       2. sk report: 0-1 ms
-       3. tablet report
-       4. 10000 replicas: 200ms
-
-### partition_rebalance_max_moves_num_per_selection
-
-Default:10
-
-IsMutable:true
-
-MasterOnly:true
-
-Valid only if use PartitionRebalancer,
-
-### partition_rebalance_move_expire_after_access
-
-Default:600   (s)
-
-IsMutable:true
-
-MasterOnly:true
-
-Valid only if use PartitionRebalancer. If this changed, cached moves will be cleared 
-
-### tablet_rebalancer_type
-
-Default:BeLoad
-
-MasterOnly:true
-
-Rebalancer type(ignore case): BeLoad, Partition. If type parse failed, use BeLoad as default
-
-### max_balancing_tablets
-
-Default:100
-
-IsMutable:true
-
-MasterOnly:true
-
-if the number of balancing tablets in TabletScheduler exceed max_balancing_tablets, no more balance check 
-
-### max_scheduling_tablets
-
-Default:2000
-
-IsMutable:true
-
-MasterOnly:true
-
-if the number of scheduled tablets in TabletScheduler exceed max_scheduling_tablets skip checking.
-
-### disable_balance
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-if set to true, TabletScheduler will not do balance.
-
-### balance_load_score_threshold
-
-Default:0.1 (10%)
-
-IsMutable:true
-
-MasterOnly:true
-
-the threshold of cluster balance score, if a backend's load score is 10% lower than average score,  this backend will be marked as LOW load, if load score is 10% higher than average score, HIGH load  will be marked
-
-### schedule_slot_num_per_path
-
-Default:2
-
-the default slot number per path in tablet scheduler , remove this config and dynamically adjust it by clone task statistic
-
-### tablet_repair_delay_factor_second
-
-Default:60 (s)
-
-IsMutable:true
-
-MasterOnly:true
-
-the factor of delay time before deciding to repair tablet.  if priority is VERY_HIGH, repair it immediately.
-
--  HIGH, delay tablet_repair_delay_factor_second * 1;
--  NORMAL: delay tablet_repair_delay_factor_second * 2;
--  LOW: delay tablet_repair_delay_factor_second * 3;
-
-### es_state_sync_interval_second
-
-Default:10
-
-fe will call es api to get es index shard info every es_state_sync_interval_secs
-
-### disable_hadoop_load
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-Load using hadoop cluster will be deprecated in future. Set to true to disable this kind of load.
-
-### db_used_data_quota_update_interval_secs
-
-Default:300 (s)
-
-IsMutable:true
-
-MasterOnly:true
-
-For better data load performance, in the check of whether the amount of data used by the database before data load exceeds the quota, we do not calculate the amount of data already used by the database in real time, but obtain the periodically updated value of the daemon thread.
-
-This configuration is used to set the time interval for updating the value of the amount of data used by the database
-
-### disable_load_job
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-if this is set to true
-
-- all pending load job will failed when call begin txn api
--  all prepare load job will failed when call commit txn api
--  all committed load job will waiting to be published 
-
-### catalog_try_lock_timeout_ms
-
-Default:5000  (ms)
-
-IsMutable:true
-
-The tryLock timeout configuration of catalog lock.  Normally it does not need to change, unless you need to test something.
-
-### max_query_retry_time
-
-Default:1
-
-IsMutable:true
-
-The number of query retries.  A query may retry if we encounter RPC exception and no result has been sent to user.  You may reduce this number to avoid Avalanche disaster
-
-### remote_fragment_exec_timeout_ms
-
-Default:5000  (ms)
-
-IsMutable:true
-
-The timeout of executing async remote fragment.  In normal case, the async remote fragment will be executed in a short time. If system are under high load condition,try to set this timeout longer.
-
-### enable_local_replica_selection
-
-Default:false
-
-IsMutable:true
-
-If set to true, Planner will try to select replica of tablet on same host as this Frontend. This may reduce network transmission in following case: 
-
--  N hosts with N Backends and N Frontends deployed. 
-- The data has N replicas. 
--  High concurrency queries are syyuyuient to all Frontends evenly 
--  In this case, all Frontends can only use local replicas to do the query. If you want to allow fallback to nonlocal replicas when no local replicas available, set enable_local_replica_selection_fallback to true.
-
-### enable_local_replica_selection_fallback
-
-Default:false
-
-IsMutable:true
-
-Used with enable_local_replica_selection. If the local replicas is not available, fallback to the nonlocal replicas.
-
-### max_unfinished_load_job
-
-Default:1000
-
-IsMutable:true
-
-MasterOnly:true
-
- Max number of load jobs, include PENDING、ETL、LOADING、QUORUM_FINISHED. If exceed this number, load job is not allowed to be submitted
-
-### max_bytes_per_broker_scanner
-
-Default:`3 * 1024 * 1024 * 1024L`  (3G)
-
-IsMutable:true
-
-MasterOnly:true
-
-Max bytes a broker scanner can process in one broker load job. Commonly, each Backends has one broker scanner.
-
-### enable_auth_check
-
-Default:true
-
-if set to false, auth check will be disable, in case some goes wrong with the new privilege system.
-
-### tablet_stat_update_interval_second
-
-Default:300(5min)
-
-update interval of tablet stat , All frontends will get tablet stat from all backends at each interval
-
-### storage_flood_stage_usage_percent  
-
-Default:95 (95%)
-
-IsMutable:true
-
-MasterOnly:true
-
-###  storage_flood_stage_left_capacity_bytes
-
-Default:
-
-	storage_flood_stage_usage_percent  : 95  (95%)
-	
-	storage_flood_stage_left_capacity_bytes :  1 * 1024 * 1024 * 1024 (1GB)
-
-IsMutable:true
-
-MasterOnly:true
-
-If capacity of disk reach the 'storage_flood_stage_usage_percent' and  'storage_flood_stage_left_capacity_bytes', the following operation will be rejected: 
-
-1. load job
-2. restore job
-
-### storage_high_watermark_usage_percent
-
-Default:85  (85%)
-
-IsMutable:true
-
-MasterOnly:true
-
-### storage_min_left_capacity_bytes
-
-Default: `2 * 1024 * 1024 * 1024`  (2GB)
-
-IsMutable:true
-
-MasterOnly:true
-
- 'storage_high_watermark_usage_percent' limit the max capacity usage percent of a Backend storage path.  'storage_min_left_capacity_bytes' limit the minimum left capacity of a Backend storage path.  If both limitations are reached, this storage path can not be chose as tablet balance destination. But for tablet recovery, we may exceed these limit for keeping data integrity as much as possible.
-
-### backup_job_default_timeout_ms
-
-Default:86400 * 1000  (1day)
-
-IsMutable:true
-
-MasterOnly:true
-
-default timeout of backup job
-
-### with_k8s_certs
-
-Default:false
-
-If use k8s deploy manager locally, set this to true and prepare the certs files
-
-### dpp_hadoop_client_path
-
-Default:/lib/hadoop-client/hadoop/bin/hadoop
-
-### dpp_bytes_per_reduce
-
-Default:`100 * 1024 * 1024L` (100M)
-
-### dpp_default_cluster
-
-Default:palo-dpp
-
-### dpp_default_config_str
-
-Default:{
-            hadoop_configs : 'mapred.job.priority=NORMAL;mapred.job.map.capacity=50;mapred.job.reduce.capacity=50;mapred.hce.replace.streaming=false;abaci.long.stored.job=true;dce.shuffle.enable=false;dfs.client.authserver.force_stop=true;dfs.client.auth.method=0'
-        }
-
-### dpp_config_str
-
-Default:{
-            palo-dpp : {
-                    hadoop_palo_path : '/dir',
-                    hadoop_configs : 'fs.default.name=hdfs://host:port;mapred.job.tracker=host:port;hadoop.job.ugi=user,password'
-                }
-        }
-
-### enable_deploy_manager
-
-Default:disable
-
- Set to true if you deploy Palo using thirdparty deploy manager Valid options are:
-
-- disable:    no deploy manager 
--  k8s:        Kubernetes 
-- ambari:     Ambari 
-- local:      Local File (for test or Boxer2 BCC version)
-
-### enable_token_check
-
-Default:true
-
-For forward compatibility, will be removed later. check token when download image file.
-
-### expr_depth_limit
-
-Default:3000
-
-IsMutable:true
-
-Limit on the depth of an expr tree.  Exceed this limit may cause long analysis time while holding db read lock.  Do not set this if you know what you are doing
-
-### expr_children_limit
-
-Default:10000
-
-IsMutable:true
-
-Limit on the number of expr children of an expr tree.  Exceed this limit may cause long analysis time while holding database read lock.  
-
-### proxy_auth_magic_prefix
-
-Default:x@8
-
-### proxy_auth_enable
-
-Default:false
-
-### meta_publish_timeout_ms
-
-Default:1000 (ms)
-
-The default user resource publishing timeout 
-
-### disable_colocate_balance
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-This configs can set to true to disable the automatic colocate tables's relocate and balance.  If 'disable_colocate_balance' is set to true,   ColocateTableBalancer will not relocate and balance colocate tables.
-      **Attention**: 
-
-- Under normal circumstances, there is no need to turn off balance at all. 
--  Because once the balance is turned off, the unstable colocate table may not be restored 
--  Eventually the colocate plan cannot be used when querying.
-
-### query_colocate_join_memory_limit_penalty_factor
-
-Default:1
-
-IsMutable:true
-
-colocote join PlanFragment instance的memory_limit = exec_mem_limit / min (query_colocate_join_memory_limit_penalty_factor, instance_num) 
-
-### max_connection_scheduler_threads_num
-
-Default:4096
-
-Maximal number of thread in connection-scheduler-pool.
-
-### qe_max_connection
-
-Default:1024
-
-Maximal number of connections per FE.
-
-### check_consistency_default_timeout_second
-
-Default:600 (10 minutes)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default timeout of a single consistency check task. Set long enough to fit your tablet size
-
-### consistency_check_start_time
-
-Default:23
-
-IsMutable:true
-
-MasterOnly:true
-
-Consistency checker will run from *consistency_check_start_time* to *consistency_check_end_time*.
-
-If the two times are the same, no consistency check will be triggered.
-
-### consistency_check_end_time
-
-Default:23
-
-IsMutable:true
-
-MasterOnly:true
-
-Consistency checker will run from *consistency_check_start_time* to *consistency_check_end_time*.
-
-If the two times are the same, no consistency check will be triggered.
-
-### export_tablet_num_per_task
-
-Default:5
-
-IsMutable:true
-
-MasterOnly:true
-
-Number of tablets per export query plan
-
-### export_task_default_timeout_second
-
-Default:2 * 3600   (2 hour)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default timeout of export jobs.
-
-### export_running_job_num_limit
-
-Default:5
-
-IsMutable:true
-
-MasterOnly:true
-
-Limitation of the concurrency of running export jobs.  Default is 5.  0 is unlimited
-
-### export_checker_interval_second
-
-Default:5
-
-Export checker's running interval.
-
-### default_load_parallelism
-
-Default: 1
-
-IsMutable:true
-
-MasterOnly:true
-
-Default parallelism of the broker load execution plan on a single node.
-If the user to set the parallelism when the broker load is submitted, this parameter will be ignored.
-
-### max_broker_concurrency
-
-Default:10
-
-IsMutable:true
-
-MasterOnly:true
-
-Maximal concurrency of broker scanners.  
-
-### min_bytes_per_broker_scanner
-
-Default:67108864L (64M)
-
-IsMutable:true
-
-MasterOnly:true
-
-Minimum bytes that a single broker scanner will read.  
-
-### catalog_trash_expire_second
-
-Default:86400L (1day)
-
-IsMutable:true
-
-MasterOnly:true
-
-After dropping database(table/partition), you can recover it by using RECOVER stmt. And this specifies the maximal data retention time. After time, the data will be deleted permanently.
-
-### storage_cooldown_second
-
-Default:`30 * 24 * 3600L`  (30 days)
-
-When create a table(or partition), you can specify its storage medium(HDD or SSD). If set to SSD, this specifies the default duration that tablets will stay on SSD.  After that, tablets will be moved to HDD automatically.  You can set storage cooldown time in CREATE TABLE stmt.
-
-### default_storage_medium
-
-Default:HDD
-
-When create a table(or partition), you can specify its storage medium(HDD or SSD). If not set, this specifies the default medium when creat.
-
-### max_backend_down_time_second
-
-Default:3600  (1 hour)
-
-IsMutable:true
-
-MasterOnly:true
-
-If a backend is down for *max_backend_down_time_second*, a BACKEND_DOWN event will be triggered. 
-
-### alter_table_timeout_second
-
-Default:86400   (1 day)
-
-IsMutable:true
-
-MasterOnly:true
-
-Maximal timeout of ALTER TABLE request. Set long enough to fit your table data size. 
-
-### capacity_used_percent_high_water
-
-Default:0.75  (75%)
-
-IsMutable:true
-
-MasterOnly:true
-
-The high water of disk capacity used percent. This is used for calculating load score of a backend
-
-### clone_distribution_balance_threshold
-
-Default:0.2 
-
-IsMutable:true
-
-MasterOnly:true
-
-Balance threshold of num of replicas in Backends.
-
-### clone_capacity_balance_threshold
-
-Default:0.2  
-
-IsMutable:true
-
-MasterOnly:true
-
-Balance threshold of data size in BE.
-      The balance algorithm is: 
-
-1. Calculate the average used capacity(AUC) of the entire cluster. (total data size / total backends num)
-2. The high water level is (AUC * (1 + clone_capacity_balance_threshold)) 
-3. The low water level is (AUC * (1 - clone_capacity_balance_threshold)) 
-4. The Clone checker will try to move replica from high water level BE to low water level BE.
-
-### replica_delay_recovery_second
-
-Default:0
-
-IsMutable:true
-
-MasterOnly:true
-
-the minimal delay seconds between a replica is failed and fe try to recovery it using clone.
-
-### clone_high_priority_delay_second
-
-Default:0
-
-IsMutable:true
-
-MasterOnly:true
-
-HIGH priority clone job's delay trigger time.
-
-### clone_normal_priority_delay_second 
-
-Default:300 (5 minutes)
-
-IsMutable:true
-
-MasterOnly:true
-
-NORMAL priority clone job's delay trigger time
-
-### clone_low_priority_delay_second
-
-Default:600 (10 minutes)
-
-IsMutable:true
-
-MasterOnly:true
-
-LOW priority clone job's delay trigger time. A clone job contains a tablet which need to be cloned(recovery or migration).  If the priority is LOW, it will be delayed *clone_low_priority_delay_second*  after the job creation and then be executed.  This is to avoid a large number of clone jobs running at same time only because a host is down for a short time. 
- **NOTICE** that this config(and *clone_normal_priority_delay_second* as well)  will not work if it's smaller then *clone_checker_interval_second*
-
-### clone_max_job_num
-
-Default:100
-
-IsMutable:true
-
-MasterOnly:true
-
-Concurrency of LOW priority clone jobs.  Concurrency of High priority clone jobs is currently unlimited.
-
-### clone_job_timeout_second
-
-Default:7200  (2 hours)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default timeout of a single clone job. Set long enough to fit your replica size.  The larger the replica data size is, the more time is will cost to finish clone
-
-### clone_checker_interval_second
-
-Default:300 (5 minutes)
-
-Clone checker's running interval
-
-### tablet_delete_timeout_second
-
-Default:2
-
-IsMutable:true
-
-MasterOnly:true
-
-Same meaning as *tablet_create_timeout_second*, but used when delete a tablet.
-
-### async_loading_load_task_pool_size
-
-Default:10
-
-IsMutable:false
-
-MasterOnly:true
-
-The loading_load task executor pool size. This pool size limits the max running loading_load tasks.
-
-Currently, it only limits the loading_load task of broker load
-
-### async_pending_load_task_pool_size
-
-Default:10
-
-IsMutable:false
-
-MasterOnly:true
-
-The pending_load task executor pool size. This pool size limits the max running pending_load tasks.
-
-Currently, it only limits the pending_load task of broker load and spark load.
-
-It should be less than 'max_running_txn_num_per_db'
-
-### async_load_task_pool_size
-
-Default:10
-
-IsMutable:false
-
-MasterOnly:true
-
-This configuration is just for compatible with old version, this config has been replaced by async_loading_load_task_pool_size, it will be removed in the future.
-
-###  disable_show_stream_load
-
-Default:false
-
-IsMutable:true
-
-MasterOnly:true
-
-Whether to disable show stream load and clear stream load records in memory.
-
-### max_stream_load_record_size
-
-Default:5000
-
-IsMutable:true
-
-MasterOnly:true
-
-Default max number of recent stream load record that can be stored in memory.
-
-### fetch_stream_load_record_interval_second
-
-Default:120
-
-IsMutable:true
-
-MasterOnly:true
-
-fetch stream load record interval.
-
-### desired_max_waiting_jobs
-
-Default:100
-
-IsMutable:true
-
-MasterOnly:true
-
-Default number of waiting jobs for routine load and version 2 of load , This is a desired number.  In some situation, such as switch the master, the current number is maybe more than desired_max_waiting_jobs.
-
-### yarn_config_dir
-
-Default:PaloFe.DORIS_HOME_DIR + "/lib/yarn-config"
-
-Default yarn config file directory ,Each time before running the yarn command, we need to check that the  config file exists under this path, and if not, create them.
-
-
-### yarn_client_path
-
-Default:DORIS_HOME_DIR + "/lib/yarn-client/hadoop/bin/yarn"
-
-Default yarn client path
-
-### spark_launcher_log_dir
-
-Default: sys_log_dir + "/spark_launcher_log"
-
-The specified spark launcher log dir
-
-### spark_resource_path
-
-Default:none
-
-Default spark dependencies path
-
-### spark_home_default_dir
-
-Default:DORIS_HOME_DIR + "/lib/spark2x"
-
-Default spark home dir
-
-### spark_load_default_timeout_second
-
-Default:86400  (1 day)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default spark load timeout
-
-### spark_dpp_version
-
-Default:1.0.0
-
-Default spark dpp version
-
-### hadoop_load_default_timeout_second
-
-Default:86400 * 3   (3 days)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default hadoop load timeout
-
-### min_load_timeout_second
-
-Default:1 (1s)
-
-IsMutable:true
-
-MasterOnly:true
-
-Min stream load timeout applicable to all type of load
-
-### max_stream_load_timeout_second
-
-Default:259200 (3 days)
-
-IsMutable:true
-
-MasterOnly:true
-
-This configuration is specifically used to limit timeout setting for stream load. It is to prevent that failed stream load transactions cannot be canceled within a short time because of the user's large timeout setting
-
-### max_load_timeout_second
-
-Default:259200 (3 days)
-
-IsMutable:true
-
-MasterOnly:true
-
-Max load timeout applicable to all type of load except for stream load
-
-### stream_load_default_timeout_second
-
-Default:600 (s)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default stream load and streaming mini load timeout
-
-### insert_load_default_timeout_second
-
-Default:3600    (1 hour)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default insert load timeout
-
-### mini_load_default_timeout_second
-
-Default:3600    (1 hour)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default non-streaming mini load timeout
-
-### broker_load_default_timeout_second
-
-Default:14400   (4 hours)
-
-IsMutable:true
-
-MasterOnly:true
-
-Default broker load timeout
-
-### broker_timeout_ms
-
-Default:10000   (10s)
-
-Default broker RPC timeout
-
-### load_running_job_num_limit
-
-Default:0
-
-IsMutable:true
-
-MasterOnly:true
-
-The number of loading tasks is limited, the default is 0, no limit
-
-### load_input_size_limit_gb
-
-Default:0
-
-IsMutable:true
-
-MasterOnly:true
-
-The size of the data entered by the Load job, the default is 0, unlimited
-
-### delete_thread_num
-
-Default:10
-
-Concurrency of delete jobs.
-
-### load_etl_thread_num_normal_priority
-
-Default:10
-
-Concurrency of NORMAL priority etl load jobs. Do not change this if you know what you are doing.
-
-### load_etl_thread_num_high_priority
-
-Default:3
-
-Concurrency of HIGH priority etl load jobs. Do not change this if you know what you are doing
-
-### load_pending_thread_num_normal_priority
-
-Default:10
-
-Concurrency of NORMAL priority pending load jobs.  Do not change this if you know what you are doing.
-
-### load_pending_thread_num_high_priority
-
-Default:3
-
- Concurrency of HIGH priority pending load jobs. Load job priority is defined as HIGH or NORMAL.  All mini batch load jobs are HIGH priority, other types of load jobs are NORMAL priority.  Priority is set to avoid that a slow load job occupies a thread for a long time.  This is just a internal optimized scheduling policy.  Currently, you can not specified the job priority manually, and do not change this if you know what you are doing.
-
-### load_checker_interval_second
-
-Default:5 (s)
-
-The load scheduler running interval. A load job will transfer its state from PENDING to LOADING to FINISHED.  The load scheduler will transfer load job from PENDING to LOADING while the txn callback will transfer load job from LOADING to FINISHED.  So a load job will cost at most one interval to finish when the concurrency has not reached the upper limit.
-
-### max_layout_length_per_row
-
-Default:100000
-
-IsMutable:true
-
-MasterOnly:true
-
-Maximal memory layout length of a row. default is 100 KB. In BE, the maximal size of a RowBlock is 100MB(Configure as max_unpacked_row_block_size in be.conf). And each RowBlock contains 1024 rows. So the maximal size of a row is approximately 100 KB.
-     eg.
-     schema: k1(int), v1(decimal), v2(varchar(2000))
-     then the memory layout length of a row is: 4(int) + 16(decimal) + 2000(varchar) = 2020 (Bytes)
-     See memory layout length of all types, run 'help create table' in mysql-client.
-     If you want to increase this number to support more columns in a row, you also need to increase the
-     max_unpacked_row_block_size in be.conf. But the performance impact is unknown.
-
-### load_straggler_wait_second
-
-Default:300
-
-IsMutable:true
-
-MasterOnly:true
-
-Maximal wait seconds for straggler node in load
-     eg.
-           there are 3 replicas A, B, C
-           load is already quorum finished(A,B) at t1 and C is not finished
-           if (current_time - t1) > 300s, then palo will treat C as a failure node
-           will call transaction manager to commit the transaction and tell transaction manager
-           that C is failed
-     
-      This is also used when waiting for publish tasks
-      this parameter is the default value for all job and the DBA could specify it for separate job
-
-### thrift_server_max_worker_threads
-
-Default:4096
-
-The thrift server max worker threads
-
-### publish_version_interval_ms
-
-Default:10 (ms)
-
-minimal intervals between two publish version action
-
-### publish_version_timeout_second
-
-Default:30 (s)
-
-IsMutable:true
-
-MasterOnly:true
-
-Maximal waiting time for all publish version tasks of one transaction to be finished
-
-### max_create_table_timeout_second
-
-Default:60 (s)
-
-IsMutable:true
-
-MasterOnly:true
-
-In order not to wait too long for create table(index), set a max timeout.
-
-### tablet_create_timeout_second
-
-Default:1(s)
-
-IsMutable:true
-
-MasterOnly:true
-
-Maximal waiting time for creating a single replica.
-      eg.
-           if you create a table with #m tablets and #n replicas for each tablet,
-           the create table request will run at most (m * n * tablet_create_timeout_second) before timeout.
-
-### max_mysql_service_task_threads_num
-
-Default:4096
-
-When FeEstarts the MySQL server based on NIO model, the number of threads responsible for Task events. Only `mysql_service_nio_enabled` is true takes effect.
-
-### rewrite_count_distinct_to_bitmap_hll
-
-Default: true
-
-This variable is a session variable, and the session level takes effect.
-
-- Type: boolean
-- Description: **Only for the table of the AGG model**, when the variable is true, when the user query contains aggregate functions such as count(distinct c1), if the type of the c1 column itself is bitmap, count distnct will be rewritten It is bitmap_union_count(c1). When the type of the c1 column itself is hll, count distinct will be rewritten as hll_union_agg(c1) If the variable is false, no overwriting occurs..
-
-### cluster_id
-
-Default:-1
-
-node(FE or BE) will be considered belonging to the same Palo cluster if they have same cluster id.  Cluster id is usually a random integer generated when master FE start at first time. You can also specify one.
-
-### auth_token
-
-Default:empty
-
-Cluster token used for internal authentication.
-
-### cluster_name
-
-Default: Apache doris
-
-Cluster name will be shown as the title of web page
-
-### mysql_service_io_threads_num
-
-Default:4
-
-When FeEstarts the MySQL server based on NIO model, the number of threads responsible for IO events. Only `mysql_service_nio_enabled` is true takes effect.
-
-### mysql_service_nio_enabled
-
-Default:true
-
-Whether FE starts the MySQL server based on NiO model. It is recommended to turn off this option when the query connection is less than 1000 or the concurrency scenario is not high
-
-### query_port
-
-Default:9030
-
-FE MySQL server port
-
-### rpc_port
-
-Default:9020
-
-FE Thrift Server port
-
-### thrift_server_type
-
-This configuration represents the service model used by The Thrift Service of FE, is of type String and is case-insensitive.
-
-If this parameter is 'SIMPLE', then the 'TSimpleServer' model is used, which is generally not suitable for production and is limited to test use.
-
-If the parameter is 'THREADED', then the 'TThreadedSelectorServer' model is used, which is a non-blocking I/O model, namely the master-slave Reactor model, which can timely respond to a large number of concurrent connection requests and performs well in most scenarios.
-
-If this parameter is `THREAD_POOL`, then the `TThreadPoolServer` model is used, the model for blocking I/O model, use the thread pool to handle user connections, the number of simultaneous connections are limited by the number of thread pool, if we can estimate the number of concurrent requests in advance, and tolerant enough thread resources cost, this model will have a better performance, the service model is used by default
-
-### thrift_backlog_num
-
-Default:1024
-
-The backlog_num for thrift server , When you enlarge this backlog_num, you should ensure it's value larger than the linux /proc/sys/net/core/somaxconn config
-
-### thrift_client_timeout_ms
-
-Default:0
-
-The connection timeout and socket timeout config for thrift server.
-
-The value for thrift_client_timeout_ms is set to be larger than zero to prevent some hang up problems in java.net.SocketInputStream.socketRead0
-
-### mysql_nio_backlog_num
-
-Default:1024
-
-The backlog_num for mysql nio server, When you enlarge this backlog_num, you should enlarge the value in the linux /proc/sys/net/core/somaxconn file at the same time
-
-### http_port
-
-Default:8030
-
-HTTP bind port. Defaults to 8030
-
-### http_api_extra_base_path
-
-In some deployment environments, user need to specify an additional base path as the unified prefix of the HTTP API. This parameter is used by the user to specify additional prefixes. After setting, user can get the parameter value through the `GET /api/basepath` interface. And the new UI will also try to get this base path first to assemble the URL. Only valid when `enable_http_server_v2` is true.
-
-The default is empty, that is, not set
-
-### max_bdbje_clock_delta_ms
-
-Default:5000 (5s)
-
-Set the maximum acceptable clock skew between non-master FE to Master FE host. This value is checked whenever a non-master FE establishes a connection to master FE via BDBJE. The connection is abandoned if the clock skew is larger than this value.
-
-### ignore_meta_check
-
-Default:false
-
-IsMutable:true
-
-If true, non-master FE will ignore the meta data delay gap between Master FE and its self,  even if the metadata delay gap exceeds *meta_delay_toleration_second*.  Non-master FE will still offer read service.
-This is helpful when you try to stop the Master FE for a relatively long time for some reason,  but still wish the non-master FE can offer read service.
-
-### metadata_failure_recovery
-
-Default:false
-
-If true, FE will reset bdbje replication group(that is, to remove all electable nodes info)  and is supposed to start as Master.  If all the electable nodes can not start, we can copy the meta data to another node and set this config to true to try to restart the FE..
-
-### priority_networks
-
-Default:none
-
-Declare a selection strategy for those servers have many ips.  Note that there should at most one ip match this list.  this is a list in semicolon-delimited format, in CIDR notation, e.g. 10.10.10.0/24 , If no ip match this rule, will choose one randomly..
-
-### txn_rollback_limit
-
-Default:100
-
-the max txn number which bdbje can rollback when trying to rejoin the group
-
-### max_agent_task_threads_num
-
-Default:4096
-
-MasterOnly:true
-
-max num of thread to handle agent task in agent task thread-pool.
-
-### heartbeat_mgr_blocking_queue_size
-
-Default:1024
-
-MasterOnly:true
-
-blocking queue size to store heartbeat task in heartbeat_mgr.
-
-### heartbeat_mgr_threads_num
-
-Default:8
-
-MasterOnly:true
-
-num of thread to handle heartbeat events in heartbeat_mgr.
-
-### bdbje_replica_ack_timeout_second
-
-Default:10  (s)
-
-The replica ack timeout when writing to bdbje , When writing some relatively large logs, the ack time may time out, resulting in log writing failure.  At this time, you can increase this value appropriately.
-
-### bdbje_lock_timeout_second
-
-Default:1
-
-The lock timeout of bdbje operation, If there are many LockTimeoutException in FE WARN log, you can try to increase this value
-
-### bdbje_heartbeat_timeout_second
-
-Default:30
-
-The heartbeat timeout of bdbje between master and follower. the default is 30 seconds, which is same as default value in bdbje. If the network is experiencing transient problems, of some unexpected long java GC annoying you,  you can try to increase this value to decrease the chances of false timeouts
-
-### replica_ack_policy
-
-Default:SIMPLE_MAJORITY
-
-OPTION:ALL, NONE, SIMPLE_MAJORITY
-
-Replica ack policy of bdbje. more info, see: http://docs.oracle.com/cd/E17277_02/html/java/com/sleepycat/je/Durability.ReplicaAckPolicy.html
-
-### replica_sync_policy
-
-Default:SYNC
-
-选项:SYNC, NO_SYNC, WRITE_NO_SYNC
-
-Follower FE sync policy of bdbje.
-
-### master_sync_policy
-
-Default:SYNC
-
-选项:SYNC, NO_SYNC, WRITE_NO_SYNC
-
-Master FE sync policy of bdbje. If you only deploy one Follower FE, set this to 'SYNC'. If you deploy more than 3 Follower FE,  you can set this and the following 'replica_sync_policy' to WRITE_NO_SYNC.  more info, see: http://docs.oracle.com/cd/E17277_02/html/java/com/sleepycat/je/Durability.SyncPolicy.html
-
-### meta_delay_toleration_second
-
-Default:300 (5 minutes)
-
-Non-master FE will stop offering service  if meta data delay gap exceeds *meta_delay_toleration_second*
-
-### edit_log_roll_num
-
-Default:50000
-
-IsMutable:true
-
-MasterOnly:true
-
-Master FE will save image every *edit_log_roll_num* meta journals.
-
-### edit_log_port
-
-Default:9010
-
-bdbje port
-
-### edit_log_type
-
-Default:BDB
-
-Edit log type.
-      BDB: write log to bdbje
-      LOCAL: deprecated..
-
-### tmp_dir
-
-Default:PaloFe.DORIS_HOME_DIR + "/temp_dir"
-
-temp dir is used to save intermediate results of some process, such as backup and restore process.  file in this dir will be cleaned after these process is finished.
-
-### meta_dir
-
-Default:DORIS_HOME_DIR + "/doris-meta"
-
-Type: string Description: Doris meta data will be saved here.The storage of this dir is highly recommended as to be:
-
-- High write performance (SSD)
-- Safe (RAID)
-
-### custom_config_dir
-
-Default:PaloFe.DORIS_HOME_DIR + "/conf"
-
-Configure the location of the `fe_custom.conf` file. The default is in the `conf/` directory.
-
-In some deployment environments, the `conf/` directory may be overwritten due to system upgrades. This will cause the user modified configuration items to be overwritten. At this time, we can store `fe_custom.conf` in another specified directory to prevent the configuration file from being overwritten.
-
-### log_roll_size_mb
-
-Default:1024  (1G)
-
-The max size of one sys log and audit log
-
-### sys_log_dir
-
-Default:PaloFe.DORIS_HOME_DIR + "/log"
-
-sys_log_dir:
-      This specifies FE log dir. FE will produces 2 log files:
-       fe.log:      all logs of FE process.
-       fe.warn.log  all WARNING and ERROR log of FE process.
-
-### sys_log_level
-
-Default:INFO
-
-log level:INFO, WARNING, ERROR, FATAL
-
-### sys_log_roll_num
-
-Default:10
-
-Maximal FE log files to be kept within an sys_log_roll_interval. default is 10, which means there will be at most 10 log files in a day
-
-### sys_log_verbose_modules
-
-Default:{}
-
-Verbose modules. VERBOSE level is implemented by log4j DEBUG level.
-
-eg:
-    sys_log_verbose_modules = org.apache.doris.catalog
-    This will only print debug log of files in package org.apache.doris.catalog and all its sub packages.
-
-### sys_log_roll_interval
-
-Default:DAY
-
-sys_log_roll_interval:
-
-- DAY:  log suffix is  yyyyMMdd
-- HOUR: log suffix is  yyyyMMddHH
-
-### sys_log_delete_age
-
-Default:7d
-
-sys_log_delete_age:
-       default is 7 days, if log's last modify time is 7 days ago, it will be deleted.
-
-      support format:
-                7d      7 day
-                10h     10 hours
-                60m     60 min
-                120s    120 seconds
-
-
-### audit_log_dir
-
-Default:DORIS_HOME_DIR + "/log"
-
-audit_log_dir:
-           This specifies FE audit log dir..
-            Audit log fe.audit.log contains all requests with related infos such as user, host, cost, status, etc
-
-### audit_log_roll_num
-
-Default:90
-
-Maximal FE audit log files to be kept within an audit_log_roll_interval. 
-
-### audit_log_modules
-
-Default:{"slow_query", "query", "load", "stream_load"}
-
-Slow query contains all queries which cost exceed *qe_slow_log_ms*
-
-### qe_slow_log_ms
-
-Default:5000 (5 seconds)
-
-If the response time of a query exceed this threshold, it will be recorded in audit log as slow_query.
-
-### audit_log_roll_interval
-
-Default:DAY
-
-DAY:  logsuffix is :yyyyMMdd
-HOUR: logsuffix is :yyyyMMddHH
-
-### audit_log_delete_age
-
-Default:30d
-
-default is 30 days, if log's last modify time is 30 days ago, it will be deleted.
-
-      support format:
-                7d      7 day
-                10h     10 hours
-                60m     60 min
-                120s    120 seconds
-
-### plugin_dir
-
-Default:DORIS_HOME + "/plugins
-
-plugin install directory
-
-### plugin_enable
-
-Default:true
-
-IsMutable:true
-
-MasterOnly:true
-
-Whether the plug-in is enabled, enabled by default
-
-### label_keep_max_second
-
-Default:`3 * 24 * 3600`  (3 days)
-
-IsMutable:true
-
-MasterOnly:true
-
-labels of finished or cancelled load jobs will be removed after *label_keep_max_second* , The removed labels can be reused.  Set a short time will lower the FE memory usage.  (Because all load jobs' info is kept in memory before being removed)
-
-In the case of high concurrent writes, if there is a large backlog of jobs and call frontend service failed, check the log. If the metadata write takes too long to lock, you can adjust this value to 12 hours, or 6 hours less
-
-### streaming_label_keep_max_second
-
-Default:43200 (12 hours)
-
-IsMutable:true
-
-MasterOnly:true
-
-For some high-frequency load work, such as: INSERT, STREAMING LOAD, ROUTINE_LOAD_TASK. If it expires, delete the completed job or task.
-
-### history_job_keep_max_second
-
-Default:7 * 24 * 3600   (7 days)
-
-IsMutable:true
-
-MasterOnly:true
-
-The max keep time of some kind of jobs. like schema change job and rollup job.
-
-### label_clean_interval_second
-
-Default:4 * 3600  (4 hours)
-
-Load label cleaner will run every *label_clean_interval_second* to clean the outdated jobs.
-
-### delete_info_keep_max_second
-
-Default:3 * 24 * 3600  (3 days)
-
-IsMutable:true
-
-MasterOnly:false
-
-Delete all deleteInfo older than *delete_info_keep_max_second* , Setting a shorter time will reduce FE memory usage and image file size. (Because all deleteInfo is stored in memory and image files before being deleted)
-
-### transaction_clean_interval_second
-
-Default:30
-
-the transaction will be cleaned after transaction_clean_interval_second seconds if the transaction is visible or aborted  we should make this interval as short as possible and each clean cycle as soon as possible
-
-
-### default_max_query_instances
-
-The default value when user property max_query_instances is equal or less than 0. This config is used to limit the max number of instances for a user. This parameter is less than or equal to 0 means unlimited.
-
-The default value is -1
-
-### use_compact_thrift_rpc
-
-Default: true
-
-Whether to use compressed format to send query plan structure. After it is turned on, the size of the query plan structure can be reduced by about 50%, thereby avoiding some "send fragment timeout" errors.
-However, in some high-concurrency small query scenarios, the concurrency may be reduced by about 10%.
-
-### enable_force_drop_redundant_replica
-
-Default: false
-
-Dynamically configured: true
-
-Only for Master FE: true
-
-If set to true, the system will immediately drop redundant replicas in the tablet scheduling logic. This may cause some load jobs that are writing to the corresponding replica to fail, but it will speed up the balance and repair speed of the tablet.
-When there are a large number of replicas waiting to be balanced or repaired in the cluster, you can try to set this config to speed up the balance and repair of replicas at the expense of partial load success rate.
-
-### repair_slow_replica
-
-Default: false
-
-IsMutable:true
-
-MasterOnly: true
-
-If set to true, the replica with slower compaction will be automatically detected and migrated to other machines. The detection condition is that the version count of the fastest replica exceeds the value of `min_version_count_indicate_replica_compaction_too_slow`, and the ratio of the version count difference from the fastest replica exceeds the value of `valid_version_count_delta_ratio_between_replicas`
-
-### colocate_group_relocate_delay_second
-
-Default: 1800
-
-Dynamically configured: true
-
-Only for Master FE: true
-
-The relocation of a colocation group may involve a large number of tablets moving within the cluster. Therefore, we should use a more conservative strategy to avoid relocation of colocation groups as much as possible.
-Reloaction usually occurs after a BE node goes offline or goes down. This parameter is used to delay the determination of BE node unavailability. The default is 30 minutes, i.e., if a BE node recovers within 30 minutes, relocation of the colocation group will not be triggered.
-
-### allow_replica_on_same_host
-
-Default: false
-
-Dynamically configured: false
-
-Only for Master FE: false
-
-Whether to allow multiple replicas of the same tablet to be distributed on the same host. This parameter is mainly used for local testing, to facilitate building multiple BEs to test certain multi-replica situations. Do not use it for non-test environments.
-
-### min_version_count_indicate_replica_compaction_too_slow
-
-Default: 200
-
-Dynamically configured: true
-
-Only for Master FE: false
-
-The version count threshold used to judge whether replica compaction is too slow
-
-### valid_version_count_delta_ratio_between_replicas
-
-Default: 0.5
-
-Dynamically configured: true
-
-Only for Master FE: true
-
-The valid ratio threshold of the difference between the version count of the slowest replica and the fastest replica. If `repair_slow_replica` is set to true, it is used to determine whether to repair the slowest replica
-
-### min_bytes_indicate_replica_too_large
-
-Default: `2 * 1024 * 1024 * 1024` (2G)
-
-Dynamically configured: true
-
-Only for Master FE: true
-
-The data size threshold used to judge whether replica is too large
-
-### skip_compaction_slower_replica
-
-Default: true
-
-Dynamically configured: true
-
-Only for Master FE: false
-
-If set to true, the compaction slower replica will be skipped when select get queryable replicas
-
-### sync_commit_interval_second
-
-The maximum time interval for committing transactions. If there is still data in the channel that has not been submitted after this time, the consumer will notify the channel to submit the transaction.
-
-Default: 10 (seconds)
-
-Is it possible to configure dynamically: true
-
-Whether it is a configuration item unique to the Master FE node: true
-
-### min_sync_commit_size
-
-The minimum number of events that must be satisfied to commit a transaction. If the number of events received by Fe is less than it, it will continue to wait for the next batch of data until the time exceeds `sync_commit_interval_second`. The default value is 10000 events. If you want to modify this configuration, please make sure that this value is smaller than the `canal.instance.memory.buffer.size` configuration on the canal side (default 16384), otherwise Fe will try to get the queue [...]
-
-Default: 10000
-
-Is it possible to configure dynamically: true
-
-Whether it is a configuration item unique to the Master FE node: true
-
-### min_bytes_sync_commit
-
-The minimum data size required to commit a transaction. If the data size received by Fe is smaller than it, it will continue to wait for the next batch of data until the time exceeds `sync_commit_interval_second`. The default value is 15MB, if you want to modify this configuration, please make sure this value is less than the product of `canal.instance.memory.buffer.size` and `canal.instance.memory.buffer.memunit` on the canal side (default 16MB), otherwise Before the ack, Fe will try to [...]
-
-Default: `15*1024*1024` (15M)
-
-Is it possible to configure dynamically: true
-
-Whether it is a configuration item unique to the Master FE node: true
-
-### max_bytes_sync_commit
-
- The maximum number of threads in the data synchronization job thread pool. There is only one thread pool in the entire FE, which is used to process all data synchronization tasks in the FE that send data to the BE. The implementation of the thread pool is in the `SyncTaskPool` class.
-
-Default: 10
-
-Is it possible to dynamically configure: false
-
-Is it a configuration item unique to the Master FE node: false
-
-### backend_rpc_timeout_ms
-
- Timeout millisecond for Fe sending rpc request to BE
-
-Default: 60000
-
-Is it possible to dynamically configure: false
-
-Is it a configuration item unique to the Master FE node: true
diff --git a/docs/admin-manual/data-admin/backup.md b/docs/admin-manual/data-admin/backup.md
deleted file mode 100644
index dc11fb55c70..00000000000
--- a/docs/admin-manual/data-admin/backup.md
+++ /dev/null
@@ -1,233 +0,0 @@
----
-{
-    "title": "Data Backup",
-    "language": "en"
-}
----
-
-<!--
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Data Backup
-
-Doris supports backing up the current data in the form of files to the remote storage system through the broker. Afterwards, you can restore data from the remote storage system to any Doris cluster through the restore command. Through this function, Doris can support periodic snapshot backup of data. You can also use this function to migrate data between different clusters.
-
-This feature requires Doris version 0.8.2+
-
-To use this function, you need to deploy the broker corresponding to the remote storage. Such as BOS, HDFS, etc. You can view the currently deployed broker through `SHOW BROKER;`.
-
-## A brief explanation of the principle
-
-The backup operation is to upload the data of the specified table or partition directly to the remote warehouse for storage in the form of files stored by Doris. When a user submits a Backup request, the system will perform the following operations:
-
-1. Snapshot and snapshot upload
-
-   The snapshot phase takes a snapshot of the specified table or partition data file. After that, backups are all operations on snapshots. After the snapshot, changes, imports, etc. to the table no longer affect the results of the backup. Snapshots only generate a hard link to the current data file, which takes very little time. After the snapshot is completed, the snapshot files will be uploaded one by one. Snapshot uploads are done concurrently by each Backend.
-
-2. Metadata preparation and upload
-
-   After the data file snapshot upload is complete, Frontend will first write the corresponding metadata to a local file, and then upload the local metadata file to the remote warehouse through the broker. Completing the final backup job
-
-3. Dynamic Partition Table Description
-
-   If the table is a dynamic partition table, the dynamic partition attribute will be automatically disabled after backup. When restoring, you need to manually enable the dynamic partition attribute of the table. The command is as follows:
-
-```sql
-ALTER TABLE tbl1 SET ("dynamic_partition.enable"="true")
-```
-
-4. Backup and Restore operation will NOT keep the `colocate_with` property of a table.
-
-## Start Backup
-
-1. Create a hdfs remote warehouse example_repo:
-
-   ```sql
-   CREATE REPOSITORY `example_repo`
-   WITH BROKER `hdfs_broker`
-   ON LOCATION "hdfs://hadoop-name-node:54310/path/to/repo/"
-   PROPERTIES
-   (
-      "username" = "user",
-      "password" = "password"
-   );
-   ```
-
-2. Create a remote repository for s3 : s3_repo
-
-   ```
-   CREATE REPOSITORY `s3_repo`
-   WITH S3
-   ON LOCATION "s3://bucket_name/test"
-   PROPERTIES
-   (
-       "AWS_ENDPOINT" = "http://xxxx.xxxx.com",
-       "AWS_ACCESS_KEY" = "xxxx",
-       "AWS_SECRET_KEY" = "xxx",
-       "AWS_REGION" = "xxx"
-   ); 
-   ```
-
-   >Note that.
-   >
-   >ON LOCATION is followed by Bucket Name here
-
-1. Full backup of table example_tbl under example_db to warehouse example_repo:
-
-   ```sql
-   BACKUP SNAPSHOT example_db.snapshot_label1
-   TO example_repo
-   ON (example_tbl)
-   PROPERTIES ("type" = "full");
-   ```
-
-2. Under the full backup example_db, the p1, p2 partitions of the table example_tbl, and the table example_tbl2 to the warehouse example_repo:
-
-   ```sql
-   BACKUP SNAPSHOT example_db.snapshot_label2
-   TO example_repo
-   ON
-   (
-      example_tbl PARTITION (p1,p2),
-      example_tbl2
-   );
-   ```
-
-4. View the execution of the most recent backup job:
-
-   ```sql
-   mysql> show BACKUP\G;
-   *************************** 1. row ***************************
-                  JobId: 17891847
-           SnapshotName: snapshot_label1
-                 DbName: example_db
-                  State: FINISHED
-             BackupObjs: [default_cluster:example_db.example_tbl]
-             CreateTime: 2022-04-08 15:52:29
-   SnapshotFinishedTime: 2022-04-08 15:52:32
-     UploadFinishedTime: 2022-04-08 15:52:38
-           FinishedTime: 2022-04-08 15:52:44
-        UnfinishedTasks:
-               Progress:
-             TaskErrMsg:
-                 Status: [OK]
-                Timeout: 86400
-   1 row in set (0.01 sec)
-   ```
-
-5. View existing backups in remote repositories:
-
-   ```sql
-   mysql> SHOW SNAPSHOT ON example_repo WHERE SNAPSHOT = "snapshot_label1";
-   +-----------------+---------------------+--------+
-   | Snapshot        | Timestamp           | Status |
-   +-----------------+---------------------+--------+
-   | snapshot_label1 | 2022-04-08-15-52-29 | OK     |
-   +-----------------+---------------------+--------+
-   1 row in set (0.15 sec)
-   ```
-
-For the detailed usage of BACKUP, please refer to [here](../../sql-manual/sql-reference/Data-Definition-Statements/Backup-and-Restore/BACKUP.md).
-
-## Best Practices
-
-### Backup
-
-Currently, we support full backup with the smallest partition (Partition) granularity (incremental backup may be supported in future versions). If you need to back up data regularly, you first need to plan the partitioning and bucketing of the table reasonably when building the table, such as partitioning by time. Then, in the subsequent running process, regular data backups are performed according to the partition granularity.
-
-### Data Migration
-
-Users can back up the data to the remote warehouse first, and then restore the data to another cluster through the remote warehouse to complete the data migration. Because data backup is done in the form of snapshots, new imported data after the snapshot phase of the backup job will not be backed up. Therefore, after the snapshot is completed and until the recovery job is completed, the data imported on the original cluster needs to be imported again on the new cluster.
-
-It is recommended to import the new and old clusters in parallel for a period of time after the migration is complete. After verifying the correctness of data and services, migrate services to a new cluster.
-
-## Highlights
-
-1. Operations related to backup and recovery are currently only allowed to be performed by users with ADMIN privileges.
-2. Within a database, only one backup or restore job is allowed to be executed.
-3. Both backup and recovery support operations at the minimum partition (Partition) level. When the amount of data in the table is large, it is recommended to perform operations by partition to reduce the cost of failed retry.
-4. Because of the backup and restore operations, the operations are the actual data files. Therefore, when a table has too many shards, or a shard has too many small versions, it may take a long time to backup or restore even if the total amount of data is small. Users can use `SHOW PARTITIONS FROM table_name;` and `SHOW TABLET FROM table_name;` to view the number of shards in each partition and the number of file versions in each shard to estimate job execution time. The number of files [...]
-5. When checking job status via `SHOW BACKUP` or `SHOW RESTORE` command. It is possible to see error messages in the `TaskErrMsg` column. But as long as the `State` column is not `CANCELLED`, the job is still continuing. These tasks may retry successfully. Of course, some Task errors will also directly cause the job to fail.
-   Common `TaskErrMsg` errors are as follows:
-      Q1: Backup to HDFS, the status shows UPLOADING, TaskErrMsg error message: [13333: Close broker writer failed, broker:TNetworkAddress(hostname=10.10.0.0, port=8000) msg:errors while close file output stream, cause by: DataStreamer Exception : ]
-      This is generally a network communication problem. Check the broker log to see if a certain ip or port is blocked. If it is a cloud service, you need to check whether is accessed the intranet. If so, you can add hdfs-site.xml in the broker/conf folder, you need to add dfs.client.use.datanode.hostname=true under the hdfs-site.xml configuration file, and configure the hostname mapping of the HADOOP cluster on the broker node.
-7. If the recovery job is an overwrite operation (specifying the recovery data to an existing table or partition), then from the `COMMIT` phase of the recovery job, the overwritten data on the current cluster may no longer be restored. If the restore job fails or is canceled at this time, the previous data may be damaged and inaccessible. In this case, the only way to do it is to perform the recovery operation again and wait for the job to complete. Therefore, we recommend that if unnece [...]
-
-## Related Commands
-
-1. The commands related to the backup and restore function are as follows. For the following commands, you can use `help cmd;` to view detailed help after connecting to Doris through mysql-client.
-
-   1. CREATE REPOSITORY
-
-      Create a remote repository path for backup or restore. This command needs to use the Broker process to access the remote storage. Different brokers need to provide different parameters. For details, please refer to [Broker documentation](../../advanced/broker.md), or you can directly back up to support through the S3 protocol For the remote storage of AWS S3 protocol, or directly back up to HDFS, please refer to [Create Remote Warehouse Documentation](../../sql-manual/sql-reference [...]
-
-   2. BACKUP
-
-      Perform a backup operation.
-
-   3. SHOW BACKUP
-
-      View the execution of the most recent backup job, including:
-
-      - JobId: The id of this backup job.
-      - SnapshotName: The name (Label) of this backup job specified by the user.
-      - DbName: Database corresponding to the backup job.
-      - State: The current stage of the backup job:
-        - PENDING: The initial status of the job.
-        - SNAPSHOTING: A snapshot operation is in progress.
-        - UPLOAD_SNAPSHOT: The snapshot is over, ready to upload.
-        - UPLOADING: Uploading snapshot.
-        - SAVE_META: The metadata file is being generated locally.
-        - UPLOAD_INFO: Upload metadata files and information about this backup job.
-        - FINISHED: The backup is complete.
-        - CANCELLED: Backup failed or was canceled.
-      - BackupObjs: List of tables and partitions involved in this backup.
-      - CreateTime: Job creation time.
-      - SnapshotFinishedTime: Snapshot completion time.
-      - UploadFinishedTime: Snapshot upload completion time.
-      - FinishedTime: The completion time of this job.
-      - UnfinishedTasks: During `SNAPSHOTTING`, `UPLOADING` and other stages, there will be multiple subtasks going on at the same time. The current stage shown here is the task id of the unfinished subtasks.
-      - TaskErrMsg: If there is an error in the execution of a subtask, the error message of the corresponding subtask will be displayed here.
-      - Status: Used to record some status information that may appear during the entire job process.
-      - Timeout: The timeout period of the job, in seconds.
-
-   4. SHOW SNAPSHOT
-
-      View existing backups in the remote repository.
-
-      - Snapshot: The name (Label) of the backup specified during backup.
-      - Timestamp: Timestamp of the backup.
-      - Status: Whether the backup is normal.
-
-      More detailed backup information can be displayed if a where clause is specified after `SHOW SNAPSHOT`.
-
-      - Database: The database corresponding to the backup.
-      - Details: Shows the complete data directory structure of the backup.
-
-   5. CANCEL BACKUP
-
-      Cancel the currently executing backup job.
-
-   6. DROP REPOSITORY
-
-      Delete the created remote repository. Deleting a warehouse only deletes the mapping of the warehouse in Doris, and does not delete the actual warehouse data.
-
-## More Help
-
- For more detailed syntax and best practices used by BACKUP, please refer to the [BACKUP](../../sql-manual/sql-reference/Data-Definition-Statements/Backup-and-Restore/BACKUP.md) command manual, You can also type `HELP BACKUP` on the MySql client command line for more help.
diff --git a/docs/admin-manual/data-admin/delete-recover.md b/docs/admin-manual/data-admin/delete-recover.md
deleted file mode 100644
index 98b0ec3acf9..00000000000
--- a/docs/admin-manual/data-admin/delete-recover.md
+++ /dev/null
@@ -1,53 +0,0 @@
----
-{
-    "title": "Data Recover",
-    "language": "zh-CN"
-}
----
-
-<!--
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Data Deletion Recovery
-
-In order to avoid disasters caused by misoperation, Doris supports data recovery of accidentally deleted databases/tables/partitions. After dropping table or database, Doris will not physically delete the data immediately, but will keep it in Trash for a period of time ( The default is 1 day, which can be configured through the `catalog_trash_expire_second` parameter in fe.conf). The administrator can use the RECOVER command to restore accidentally deleted data.
-
-## Start Data Recovery
-
-1.restore the database named example_db
-
-```sql
-RECOVER DATABASE example_db;
-```
-
-2.restore the table named example_tbl
-
-```sql
-RECOVER TABLE example_db.example_tbl;
-```
-
-3.restore partition named p1 in table example_tbl
-
-```sql
-RECOVER PARTITION p1 FROM example_tbl;
-```
-
-## More Help
-
-For more detailed syntax and best practices used by RECOVER, please refer to the [RECOVER](../../sql-manual/sql-reference/Database-Administration-Statements/RECOVER.md) command manual, You can also type `HELP RECOVER` on the MySql client command line for more help.
diff --git a/docs/admin-manual/http-actions/cancel-label.md b/docs/admin-manual/http-actions/cancel-label.md
deleted file mode 100644
index e60393e0211..00000000000
--- a/docs/admin-manual/http-actions/cancel-label.md
+++ /dev/null
@@ -1,64 +0,0 @@
----
-{
-    "title": "CANCEL LABEL",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# CANCEL LABEL
-## description
-    NAME:
-        cancel_label: cancel a transaction with label
-        
-    SYNOPSIS
-        curl -u user:passwd -XPOST http://host:port/api/{db}/_cancel?label={label}
-
-    DESCRIPTION
-
-        This is to cancel a transaction with specified label.
-
-    RETURN VALUES
-
-        Return a JSON format string:
-
-        Status: 
-            Success: cancel succeed
-            Others: cancel failed
-        Message: Error message if cancel failed
-           
-    ERRORS
-    
-## example
-
-    1. Cancel the transaction with label "testLabel" on database "testDb"
-
-        curl -u root -XPOST http://host:port/api/testDb/_cancel?label=testLabel
- 
-## keyword
-
-    CANCEL, LABEL
-
-
-
-
-
-
diff --git a/docs/admin-manual/http-actions/check-reset-rpc-cache.md b/docs/admin-manual/http-actions/check-reset-rpc-cache.md
deleted file mode 100644
index cbe3137e5c4..00000000000
--- a/docs/admin-manual/http-actions/check-reset-rpc-cache.md
+++ /dev/null
@@ -1,47 +0,0 @@
----
-{
-    "title": "CHECK/RESET Stub Cache",
-    "language": "zh-CN"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# CHECK/RESET Stub Cache
-## description
-   
-### Check Stub Cache
-    Check whether the connection cache is available
-
-    Description: Check whether the connection cache is available, the maximum load is 10M
-    METHOD: GET
-    URI: http://be_host:be_http_port/api/check_rpc_channel/{host_to_check}/{remot_brpc_port}/{payload_size}
-   
-### Reset Stub Cache
-    This api is used to reset the connection cache of brpc. Endpoints can be in the form of `all` to clear all caches, `host1:port1,host2:port2,...`: clear to the cache of the specified target
-
-    Description: Reset connection cache
-    METHOD: GET
-    URI: http://be_host:be_http_port/api/reset_rpc_channel/{endpoints}
-## example
-
-    curl -X GET "http://host:port/api/check_rpc_channel/host2/8060/1024000"
-    curl -X GET "http://host:port/api/reset_rpc_channel/all"
-
diff --git a/docs/admin-manual/http-actions/compaction-action.md b/docs/admin-manual/http-actions/compaction-action.md
deleted file mode 100644
index f753cea2388..00000000000
--- a/docs/admin-manual/http-actions/compaction-action.md
+++ /dev/null
@@ -1,211 +0,0 @@
----
-{
-    "title": "Compaction Action",
-    "language": "en"
-}
----
-
-<!--
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements. See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership. The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License. You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied. See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Compaction Action
-
-This API is used to view the overall compaction status of a BE node or the compaction status of a specified tablet. It can also be used to manually trigger Compaction.
-
-## View Compaction status
-
-### The overall compaction status of the node
-
-```
-curl -X GET http://be_host:webserver_port/api/compaction/run_status
-```
-
-Return JSON:
-
-```
-{
-  "CumulativeCompaction": {
-         "/home/disk1" : [10001, 10002],
-         "/home/disk2" : [10003]
-  },
-  "BaseCompaction": {
-         "/home/disk1" : [10001, 10002],
-         "/home/disk2" : [10003]
-  }
-}
-```
-
-This structure represents the id of the tablet that is performing the compaction task in a certain data directory, and the type of compaction.
-
-### Specify the compaction status of the tablet
-
-```
-curl -X GET http://be_host:webserver_port/api/compaction/show?tablet_id=xxxx
-```
-
-If the tablet does not exist, an error in JSON format is returned:
-
-```
-{
-    "status": "Fail",
-    "msg": "Tablet not found"
-}
-```
-
-If the tablet exists, the result is returned in JSON format:
-
-```
-{
-    "cumulative policy type": "NUM_BASED",
-    "cumulative point": 50,
-    "last cumulative failure time": "2019-12-16 18:13:43.224",
-    "last base failure time": "2019-12-16 18:13:23.320",
-    "last cumu success time": "2019-12-16 18:12:15.110",
-    "last base success time": "2019-12-16 18:11:50.780",
-    "rowsets": [
-        "[0-48] 10 DATA OVERLAPPING 574.00 MB",
-        "[49-49] 2 DATA OVERLAPPING 574.00 B",
-        "[50-50] 0 DELETE NONOVERLAPPING 574.00 B",
-        "[51-51] 5 DATA OVERLAPPING 574.00 B"
-    ],
-    "missing_rowsets": [],
-    "stale version path": [
-        {
-            "path id": "2",
-            "last create time": "2019-12-16 18:11:15.110 +0800",
-            "path list": "2-> [0-24] -> [25-48]"
-        }, 
-        {
-            "path id": "1",
-            "last create time": "2019-12-16 18:13:15.110 +0800",
-            "path list": "1-> [25-40] -> [40-48]"
-        }
-    ]
-}
-```
-
-Explanation of results:
-
-* cumulative policy type: The cumulative compaction policy type which is used by current tablet.
-* cumulative point: The version boundary between base and cumulative compaction. Versions before (excluding) points are handled by base compaction. Versions after (inclusive) are handled by cumulative compaction.
-* last cumulative failure time: The time when the last cumulative compaction failed. After 10 minutes by default, cumulative compaction is attempted on the this tablet again.
-* last base failure time: The time when the last base compaction failed. After 10 minutes by default, base compaction is attempted on the this tablet again.
-* rowsets: The current rowsets collection of this tablet. [0-48] means a rowset with version 0-48. The second number is the number of segments in a rowset. The `DELETE` indicates the delete version. `OVERLAPPING` and `NONOVERLAPPING` indicates whether data between segments is overlap.
-* missing_rowset: The missing rowsets.
-* stale version path: The merged version path of the rowset collection currently merged in the tablet. It is an array structure and each element represents a merged path. Each element contains three attributes: path id indicates the version path id, and last create time indicates the creation time of the most recent rowset on the path. By default, all rowsets on this path will be deleted after half an hour at the last create time.
-
-### Examples
-
-```
-curl -X GET http://192.168.10.24:8040/api/compaction/show?tablet_id=10015
-```
-
-## Manually trigger Compaction
-
-```
-curl -X POST http://be_host:webserver_port/api/compaction/run?tablet_id=xxxx\&compact_type=cumulative
-```
-
-The only one manual compaction task that can be performed at a moment, and the value range of compact_type is base or cumulative
-
-If the tablet does not exist, an error in JSON format is returned:
-
-```
-{
-    "status": "Fail",
-    "msg": "Tablet not found"
-}
-```
-
-If the compaction execution task fails to be triggered, an error in JSON format is returned:
-
-```
-{
-    "status": "Fail",
-    "msg": "fail to execute compaction, error = -2000"
-}
-```
-
-If the compaction execution task successes to be triggered, an error in JSON format is returned:
-
-```
-{
-    "status": "Success",
-    "msg": "compaction task is successfully triggered."
-}
-```
-
-Explanation of results:
-
-* status: Trigger task status, when it is successfully triggered, it is Success; when for some reason (for example, the appropriate version is not obtained), it returns Fail.
-* msg: Give specific success or failure information.
-
-### Examples
-
-```
-curl -X POST http://192.168.10.24:8040/api/compaction/run?tablet_id=10015\&compact_type=cumulative
-```
-
-## Manual Compaction execution status
-
-```
-curl -X GET http://be_host:webserver_port/api/compaction/run_status?tablet_id=xxxx
-```
-If the tablet does not exist, an error in JSON format is returned:
-
-```
-{
-    "status": "Fail",
-    "msg": "Tablet not found"
-}
-```
-
-If the tablet exists and the tablet is not running, JSON format is returned:
-
-```
-{
-    "status" : "Success",
-    "run_status" : false,
-    "msg" : "this tablet_id is not running",
-    "tablet_id" : 11308,
-    "compact_type" : ""
-}
-```
-
-If the tablet exists and the tablet is running, JSON format is returned:
-
-```
-{
-    "status" : "Success",
-    "run_status" : true,
-    "msg" : "this tablet_id is running",
-    "tablet_id" : 11308,
-    "compact_type" : "cumulative"
-}
-```
-
-Explanation of results:
-
-* run_status: Get the current manual compaction task execution status.
-
-### Examples
-
-```
-curl -X GET http://192.168.10.24:8040/api/compaction/run_status?tablet_id=10015
-
diff --git a/docs/admin-manual/http-actions/connection-action.md b/docs/admin-manual/http-actions/connection-action.md
deleted file mode 100644
index d7d81e05168..00000000000
--- a/docs/admin-manual/http-actions/connection-action.md
+++ /dev/null
@@ -1,42 +0,0 @@
----
-{
-    "title": "CONNECTION",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# CONNECTION
-
-To get current query_id from connection
-
-```
-curl -X GET http://fe_host:fe_http_port/api/connection?connection_id=123
-```
-
-If connection_id does not exist, return 404 NOT FOUND ERROR
-
-If connection_id exists, return last query_id belongs to connection_id
-```
-{
-    "query_id" : 9133b7efa92a44c8-8ed4b44772ec2a0c
-}
-```
diff --git a/docs/admin-manual/http-actions/fe-get-log-file.md b/docs/admin-manual/http-actions/fe-get-log-file.md
deleted file mode 100644
index 41ad3acdf42..00000000000
--- a/docs/admin-manual/http-actions/fe-get-log-file.md
+++ /dev/null
@@ -1,74 +0,0 @@
----
-{
-    "title": "get_log_file",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# get\_log\_file
-
-To get FE log via HTTP
-
-## Types of FE log
-
-1. fe.audit.log (Audit log)
-
-    The audit log records the all statements executed. Audit log's name format as follow:
-
-    ```
-    fe.audit.log                # The latest audit log
-    fe.audit.log.20190603.1     # The historical audit log. The smaller the sequence number, the newer the log.
-    fe.audit.log.20190603.2
-    fe.audit.log.20190602.1
-    ...
-    ```
-
-## Example
-
-1. Get the list of specified type of logs
-
-    Example
-    
-    `curl -v -X HEAD -uuser:passwd http://fe_host:http_port/api/get_log_file?type=fe.audit.log`
-    
-    Returns:
-    
-    ```
-    HTTP/1.1 200 OK
-    file_infos: {"fe.audit.log":24759,"fe.audit.log.20190528.1":132934}
-    content-type: text/html
-    connection: keep-alive
-    ```
-    
-    In the header of result, the `file_infos` section saves the file list and file size in JSON format.
-    
-2. Download files
-
-    Example:
-    
-    ```
-    curl -X GET -uuser:passwd http://fe_host:http_port/api/get_log_file?type=fe.audit.log\&file=fe.audit.log.20190528.1
-    ```
-
-## Notification
-
-Need ADMIN privilege.
diff --git a/docs/admin-manual/http-actions/fe/backends-action.md b/docs/admin-manual/http-actions/fe/backends-action.md
deleted file mode 100644
index 17589dd95d1..00000000000
--- a/docs/admin-manual/http-actions/fe/backends-action.md
+++ /dev/null
@@ -1,70 +0,0 @@
----
-{
-    "title": "Backends Action",
-    "language": "zh-CN"
-}
----
-
-<!--
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements. See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership. The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License. You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied. See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Backends Action
-
-## Request
-
-```
-GET /api/backends
-```
-
-## Description
-
-Backends Action returns the Backends list, including Backend's IP, PORT and other information.
-
-## Path parameters
-
-None
-
-## Query parameters
-
-* `is_alive`
-
-    Optional parameters. Whether to return the surviving BE nodes. The default is false, which means that all BE nodes are returned.
-
-## Request body
-
-None
-
-## Response
-
-```
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "backends": [
-            {
-                "ip": "192.1.1.1",
-                "http_port": 8040,
-                "is_alive": true
-            }
-        ]
-    },
-    "count": 0
-}
-```
diff --git a/docs/admin-manual/http-actions/fe/bootstrap-action.md b/docs/admin-manual/http-actions/fe/bootstrap-action.md
deleted file mode 100644
index 1f30ca3498d..00000000000
--- a/docs/admin-manual/http-actions/fe/bootstrap-action.md
+++ /dev/null
@@ -1,121 +0,0 @@
----
-{
-    "title": "Bootstrap Action",
-    "language": "en"
-}
----
-
-<!--
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements. See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership. The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License. You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied. See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Bootstrap Action
-
-## Request
-
-`GET /api/bootstrap`
-
-## Description
-
-It is used to judge whether the FE has started. When no parameters are provided, only whether the startup is successful is returned. If `token` and `cluster_id` are provided, more detailed information is returned.
-    
-## Path parameters
-
-none
-
-## Query parameters
-
-* `cluster_id`
-
-    The cluster id. It can be viewed in the file `palo-meta/image/VERSION`.
-    
-* `token`
-
-    Cluster token. It can be viewed in the file `palo-meta/image/VERSION`.
-
-## Request body
-
-none
-
-## Response
-
-* No parameters provided
-
-    ```
-    {
-    	"msg": "OK",
-    	"code": 0,
-    	"data": null,
-    	"count": 0
-    }
-    ```
-    
-    A code of 0 means that the FE node has started successfully. Error codes other than 0 indicate other errors.
-    
-* Provide `token` and `cluster_id`
-
-    ```
-    {
-    	"msg": "OK",
-    	"code": 0,
-    	"data": {
-    		"queryPort": 9030,
-    		"rpcPort": 9020,
-    		"maxReplayedJournal": 17287
-    	},
-    	"count": 0
-    }
-    ```
-    
-    * `queryPort` is the MySQL protocol port of the FE node.
-    * `rpcPort` is the thrift RPC port of the FE node.
-    * `maxReplayedJournal` represents the maximum metadata journal id currently played back by the FE node.
-    
-## Examples
-
-1. No parameters
-
-    ```
-    GET /api/bootstrap
-
-    Response:
-    {
-    	"msg": "OK",
-    	"code": 0,
-    	"data": null,
-    	"count": 0
-    }
-    ```
-    
-2. Provide `token` and `cluster_id`
-
-    ```
-    GET /api/bootstrap?cluster_id=935437471&token=ad87f6dd-c93f-4880-bcdb-8ca8c9ab3031
-
-    Response:
-    {
-    	"msg": "OK",
-    	"code": 0,
-    	"data": {
-    		"queryPort": 9030,
-    		"rpcPort": 9020,
-    		"maxReplayedJournal": 17287
-    	},
-    	"count": 0
-    }
-    ```
\ No newline at end of file
diff --git a/docs/admin-manual/http-actions/fe/cancel-load-action.md b/docs/admin-manual/http-actions/fe/cancel-load-action.md
deleted file mode 100644
index 1ca4f5fcd76..00000000000
--- a/docs/admin-manual/http-actions/fe/cancel-load-action.md
+++ /dev/null
@@ -1,96 +0,0 @@
----
-{
-    "title": "Cancel Load Action",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Cancel Load Action
-
-## Request
-
-`POST /api/<db>/_cancel`
-
-## Description
-
-Used to cancel the load transaction of the specified label.
-    
-## Path parameters
-
-* `<db>`
-
-    Specify the database name
-
-## Query parameters
-
-* `<label>`
-
-    Specify the load label
-
-## Request body
-
-None
-
-## Response
-
-* Cancel success
-
-    ```
-    {
-    	"msg": "OK",
-    	"code": 0,
-    	"data": null,
-    	"count": 0
-    }
-    ```
-
-* Cancel failed
-
-    ```
-    {
-    	"msg": "Error msg...",
-    	"code": 1,
-    	"data": null,
-    	"count": 0
-    }
-    ```
-    
-## Examples
-
-1. Cancel the load transaction of the specified label
-
-    ```
-    POST /api/example_db/_cancel?label=my_label1
-
-    Response:
-    {
-    	"msg": "OK",
-    	"code": 0,
-    	"data": null,
-    	"count": 0
-    }
-    ```
-    
-
-
-
-
diff --git a/docs/admin-manual/http-actions/fe/config-action.md b/docs/admin-manual/http-actions/fe/config-action.md
deleted file mode 100644
index d1d366257df..00000000000
--- a/docs/admin-manual/http-actions/fe/config-action.md
+++ /dev/null
@@ -1,83 +0,0 @@
----
-{
-    "title": "Config Action",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Config Action
-
-## Request
-
-```
-GET /rest/v1/config/fe/
-```
-
-## Description
-
-Config Action is used to obtain current FE configuration information.
-    
-## Path parameters
-
-None
-
-## Query parameters
-
-None
-
-## Request body
-
-None
-
-## Response
-
-```
-{
-	"msg": "success",
-	"code": 0,
-	"data": {
-		"column_names": ["Name", "Value"],
-		"rows": [{
-			"Value": "DAY",
-			"Name": "sys_log_roll_interval"
-		}, {
-			"Value": "23",
-			"Name": "consistency_check_start_time"
-		}, {
-			"Value": "4096",
-			"Name": "max_mysql_service_task_threads_num"
-		}, {
-			"Value": "1000",
-			"Name": "max_unfinished_load_job"
-		}, {
-			"Value": "100",
-			"Name": "max_routine_load_job_num"
-		}, {
-			"Value": "SYNC",
-			"Name": "master_sync_policy"
-		}]
-	},
-	"count": 0
-}
-```
-    
-The returned result is the same as `System Action`. Is a description of the table.
\ No newline at end of file
diff --git a/docs/admin-manual/http-actions/fe/get-load-state.md b/docs/admin-manual/http-actions/fe/get-load-state.md
deleted file mode 100644
index 69e8c6d066e..00000000000
--- a/docs/admin-manual/http-actions/fe/get-load-state.md
+++ /dev/null
@@ -1,88 +0,0 @@
----
-{
-    "title": "Get Load State",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Get Load State
-
-## Request
-
-`GET /api/<db>/get_load_state`
-
-## Description
-
-Returns the status of the load transaction of the specified label
-    
-## Path parameters
-
-* `<db>`
-
-    Specify database
-
-## Query parameters
-
-* `label`
-
-    Specify label
-
-## Request body
-
-None
-
-## Response
-
-```
-{
-	"msg": "success",
-	"code": 0,
-	"data": "VISIBLE",
-	"count": 0
-}
-```
-
-If label does not exist, return:
-
-```
-{
-	"msg": "success",
-	"code": 0,
-	"data": "UNKNOWN",
-	"count": 0
-}
-```
-    
-## Examples
-
-1. Get the status of the load transaction of the specified label.
-
-    ```
-    GET /api/example_db/get_load_state?label=my_label
-    
-    {
-    	"msg": "success",
-    	"code": 0,
-    	"data": "VISIBLE",
-    	"count": 0
-    }
-    ```
diff --git a/docs/admin-manual/http-actions/fe/get-small-file.md b/docs/admin-manual/http-actions/fe/get-small-file.md
deleted file mode 100644
index bd65a01b85b..00000000000
--- a/docs/admin-manual/http-actions/fe/get-small-file.md
+++ /dev/null
@@ -1,102 +0,0 @@
----
-{
-    "title": "Get Small File Action",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Get Small File
-
-## Request
-
-`GET /api/get_small_file`
-
-## Description
-
-Through the file id, download the file in the small file manager.
-    
-## Path parameters
-
-None
-
-## Query parameters
-
-* `token`
-
-    The token of the cluster. It can be viewed in the file `palo-meta/image/VERSION`.
-
-* `file_id`
-    
-    The file id displayed in the file manager. The file id can be viewed with the `SHOW FILE` command.
-
-## Request body
-
-None
-
-## Response
-
-```
-< HTTP/1.1 200
-< Vary: Origin
-< Vary: Access-Control-Request-Method
-< Vary: Access-Control-Request-Headers
-< Content-Disposition: attachment;fileName=ca.pem
-< Content-Type: application/json;charset=UTF-8
-< Transfer-Encoding: chunked
-
-... File Content ...
-```
-
-If there is an error, it returns:
-
-```
-{
-	"msg": "File not found or is not content",
-	"code": 1,
-	"data": null,
-	"count": 0
-}
-```
-    
-## Examples
-
-1. Download the file with the specified id
-
-    ```
-    GET /api/get_small_file?token=98e8c0a6-3a41-48b8-a72b-0432e42a7fe5&file_id=11002
-    
-    Response:
-    
-    < HTTP/1.1 200
-    < Vary: Origin
-    < Vary: Access-Control-Request-Method
-    < Vary: Access-Control-Request-Headers
-    < Content-Disposition: attachment;fileName=ca.pem
-    < Content-Type: application/json;charset=UTF-8
-    < Transfer-Encoding: chunked
-    
-    ... File Content ...
-    ```
-
-
-
-
diff --git a/docs/admin-manual/http-actions/fe/manager/cluster-action.md b/docs/admin-manual/http-actions/fe/manager/cluster-action.md
deleted file mode 100644
index b9328cc2490..00000000000
--- a/docs/admin-manual/http-actions/fe/manager/cluster-action.md
+++ /dev/null
@@ -1,77 +0,0 @@
----
-{
-    "title": "Cluster Action",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Cluster Action
-
-## Request
-
-`GET /rest/v2/manager/cluster/cluster_info/conn_info`
-
-## Cluster Connection Information
-
-`GET /rest/v2/manager/cluster/cluster_info/conn_info`
-
-### Description
-
-Used to get cluster http, mysql connection information.
-
-### Response
-
-```
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "http": [
-            "fe_host:http_ip"
-        ],
-        "mysql": [
-            "fe_host:query_ip"
-        ]
-    },
-    "count": 0
-}
-```
-    
-### Examples
-    ```
-    GET /rest/v2/manager/cluster/cluster_info/conn_info
-    
-    Response:
-    {
-        "msg": "success",
-        "code": 0,
-        "data": {
-            "http": [
-                "127.0.0.1:8030"
-            ],
-            "mysql": [
-                "127.0.0.1:9030"
-            ]
-        },
-        "count": 0
-    }
-    ```
\ No newline at end of file
diff --git a/docs/admin-manual/http-actions/fe/manager/node-action.md b/docs/admin-manual/http-actions/fe/manager/node-action.md
deleted file mode 100644
index 217a28af083..00000000000
--- a/docs/admin-manual/http-actions/fe/manager/node-action.md
+++ /dev/null
@@ -1,435 +0,0 @@
----
-{
-    "title": "Node Action",
-    "language": "en"
-}
----
-
-<!-- 
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-  http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-# Node Action
-
-## Request
-s
-`GET /rest/v2/manager/node/frontends`
-
-`GET /rest/v2/manager/node/backends`
-
-`GET /rest/v2/manager/node/brokers`
-
-`GET /rest/v2/manager/node/configuration_name`
-
-`GET /rest/v2/manager/node/node_list`
-
-`POST /rest/v2/manager/node/configuration_info`
-
-`POST /rest/v2/manager/node/set_config/fe`
-
-`POST /rest/v2/manager/node/set_config/be`
-
-## Get information about fe, be, broker nodes
-
-`GET /rest/v2/manager/node/frontends`
-
-`GET /rest/v2/manager/node/backends`
-
-`GET /rest/v2/manager/node/brokers`
-
-### Description
-
-Used to get cluster to get fe, be, broker node information.
-
-### Response
-
-```
-frontends:
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "column_names": [
-            "Name",
-            "IP",
-            "HostName",
-            "EditLogPort",
-            "HttpPort",
-            "QueryPort",
-            "RpcPort",
-            "Role",
-            "IsMaster",
-            "ClusterId",
-            "Join",
-            "Alive",
-            "ReplayedJournalId",
-            "LastHeartbeat",
-            "IsHelper",
-            "ErrMsg",
-            "Version"
-        ],
-        "rows": [
-            [
-                ...
-            ]
-        ]
-    },
-    "count": 0
-}
-```
-
-```
-backends:
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "column_names": [
-            "BackendId",
-            "Cluster",
-            "IP",
-            "HostName",
-            "HeartbeatPort",
-            "BePort",
-            "HttpPort",
-            "BrpcPort",
-            "LastStartTime",
-            "LastHeartbeat",
-            "Alive",
-            "SystemDecommissioned",
-            "ClusterDecommissioned",
-            "TabletNum",
-            "DataUsedCapacity",
-            "AvailCapacity",
-            "TotalCapacity",
-            "UsedPct",
-            "MaxDiskUsedPct",
-            "ErrMsg",
-            "Version",
-            "Status"
-        ],
-        "rows": [
-            [
-                ...
-            ]
-        ]
-    },
-    "count": 0
-}
-```
-
-```
-brokers:
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "column_names": [
-            "Name",
-            "IP",
-            "HostName",
-            "Port",
-            "Alive",
-            "LastStartTime",
-            "LastUpdateTime",
-            "ErrMsg"
-        ],
-        "rows": [
-            [
-                ...
-            ]
-        ]
-    },
-    "count": 0
-}
-```
-
-## Get node configuration information
-
-`GET /rest/v2/manager/node/configuration_name`
-
-`GET /rest/v2/manager/node/node_list`
-
-`POST /rest/v2/manager/node/configuration_info`
-
-### Description
-
-configuration_name Used to get the name of the node configuration item.  
-node_list Get the list of nodes.  
-configuration_info to get the node configuration details.
-
-### Query parameters
-`GET /rest/v2/manager/node/configuration_name`   
-none
-
-`GET /rest/v2/manager/node/node_list`  
-none
-
-`POST /rest/v2/manager/node/configuration_info`
-
-* type 
-  The value is fe or be, which specifies to get the configuration information of fe or the configuration information of be.
-
-### Request body
-
-`GET /rest/v2/manager/node/configuration_name`   
-none
-
-`GET /rest/v2/manager/node/node_list`  
-none
-
-`POST /rest/v2/manager/node/configuration_info`
-```
-{
-	"conf_name": [
-		""
-	],
-	"node": [
-		""
-	]
-}
-
-If no body is included, the parameters in the body use the default values.  
-conf_name specifies which configuration items to return, the default is all configuration items.
-node is used to specify which node's configuration information is returned, the default is all fe nodes or be nodes configuration information.
-```
-
-### Response
-`GET /rest/v2/manager/node/configuration_name`  
-``` 
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "backend":[
-            ""
-        ],
-        "frontend":[
-            ""
-        ]
-    },
-    "count": 0
-}
-```
-
-`GET /rest/v2/manager/node/node_list` 
-``` 
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "backend": [
-            ""
-        ],
-        "frontend": [
-            ""
-        ]
-    },
-    "count": 0
-}
-```
-
-`POST /rest/v2/manager/node/configuration_info?type=fe`
-```
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "column_names": [
-            "配置项",
-            "节点",
-            "节点类型",
-            "配置值类型",
-            "MasterOnly",
-            "配置值",
-            "可修改"
-        ],
-        "rows": [
-            [
-                ""
-            ]
-        ]
-    },
-    "count": 0
-}
-```
-
-`POST /rest/v2/manager/node/configuration_info?type=be`
-```
-{
-    "msg": "success",
-    "code": 0,
-    "data": {
-        "column_names": [
-            "配置项",
-            "节点",
-            "节点类型",
-            "配置值类型",
-            "配置值",
-            "可修改"
-        ],
-        "rows": [
-            [
-                ""
-            ]
-        ]
-    },
-    "count": 0
-}
-```
-    
-### Examples
-
-1. Get the fe agent_task_resend_wait_time_ms configuration information:
-
-    POST /rest/v2/manager/node/configuration_info?type=fe  
-    body:
-    ```
-    {
-        "conf_name":[
-            "agent_task_resend_wait_time_ms"
-        ]
-    }
-    ```
-    
-    Response:
-    ```
-    {
-        "msg": "success",
-        "code": 0,
-        "data": {
-            "column_names": [
-                "配置项",
-                "节点",
-                "节点类型",
-                "配置值类型",
-                "MasterOnly",
-                "配置值",
-                "可修改"
-            ],
-            "rows": [
-                [
-                    "agent_task_resend_wait_time_ms",
-                    "127.0.0.1:8030",
-                    "FE",
-                    "long",
-                    "true",
-                    "50000",
-                    "true"
-                ]
-            ]
-        },
-        "count": 0
-    }
-    ```
-
-## Modify configuration values
-
-`POST /rest/v2/manager/node/set_config/fe`
-
-`POST /rest/v2/manager/node/set_config/be`
-
-### Description
-
-Used to modify fe or be node configuration values
-
-### Request body
-```
-{
-	"config_name":{
-		"node":[
-			""
-		],
-		"value":"",
-		"persist":
-	}
-}
-
-config_name is the corresponding configuration item.  
-node is a keyword indicating the list of nodes to be modified;  
-value is the value of the configuration.  
-persist is true for permanent modification and false for temporary modification. persist means permanent modification, false means temporary modification. permanent modification takes effect after reboot, temporary modification fails after reboot.
-```
-
-### Response
-`GET /rest/v2/manager/node/configuration_name`  
-``` 
-{
-	"msg": "",
-	"code": 0,
-	"data": {
-		"failed":[
-			{
-				"config_name":"name",
-				"value"="",
-				"node":"",
-				"err_info":""
-			}
-		]
-	},
-	"count": 0
-}
-
-failed Indicates a configuration message that failed to be modified.
-```
-    
-### Examples
-
-1. Modify the agent_task_resend_wait_time_ms and alter_table_timeout_second configuration values in the fe 127.0.0.1:8030 node:
-
-    POST /rest/v2/manager/node/set_config/fe
-    body:
-    ```
-    {
-        "agent_task_resend_wait_time_ms":{
-            "node":[
-		    	"127.0.0.1:8030"
-		    ],
-		    "value":"10000",
-		    "persist":"true"
-        },
-        "alter_table_timeout_second":{
-            "node":[
-		    	"127.0.0.1:8030"
-		    ],
-		    "value":"true",
-		    "persist":"true"
-        }
-    }
-    ```
-    
-    Response:
-    ```
-    {
-        "msg": "success",
-        "code": 0,
-        "data": {
-            "failed": [
-                {
-                    "config_name": "alter_table_timeout_second",
-                    "node": "10.81.85.89:8837",
... 357118 lines suppressed ...


---------------------------------------------------------------------
To unsubscribe, e-mail: commits-unsubscribe@doris.apache.org
For additional commands, e-mail: commits-help@doris.apache.org