You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by st...@apache.org on 2016/07/27 23:14:18 UTC
[49/51] [partial] incubator-mynewt-core git commit: add stm32 and
nordic sdks based on new structure
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/f06c2d2b/hw/mcu/nordic/nrf52xxx/include/mcu/nrf52.h
----------------------------------------------------------------------
diff --git a/hw/mcu/nordic/nrf52xxx/include/mcu/nrf52.h b/hw/mcu/nordic/nrf52xxx/include/mcu/nrf52.h
deleted file mode 100755
index 142b88b..0000000
--- a/hw/mcu/nordic/nrf52xxx/include/mcu/nrf52.h
+++ /dev/null
@@ -1,2028 +0,0 @@
-/****************************************************************************************************//**
- * @file nrf52.h
- *
- * @brief CMSIS Cortex-M4 Peripheral Access Layer Header File for
- * nrf52 from Nordic Semiconductor.
- *
- * @version V1
- * @date 15. June 2015
- *
- * @note Generated with SVDConv V2.81d
- * from CMSIS SVD File 'nrf52.xml' Version 1,
- *
- * @par Copyright (c) 2015, Nordic Semiconductor ASA
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * * Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * * Neither the name of Nordic Semiconductor ASA nor the names of its
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *******************************************************************************************************/
-
-
-
-/** @addtogroup Nordic Semiconductor
- * @{
- */
-
-/** @addtogroup nrf52
- * @{
- */
-
-#ifndef NRF52_H
-#define NRF52_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* ------------------------- Interrupt Number Definition ------------------------ */
-
-typedef enum {
-/* ------------------- Cortex-M4 Processor Exceptions Numbers ------------------- */
- Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
- NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
- HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
- MemoryManagement_IRQn = -12, /*!< 4 Memory Management, MPU mismatch, including Access Violation
- and No Match */
- BusFault_IRQn = -11, /*!< 5 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory
- related Fault */
- UsageFault_IRQn = -10, /*!< 6 Usage Fault, i.e. Undef Instruction, Illegal State Transition */
- SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
- DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
- PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
- SysTick_IRQn = -1, /*!< 15 System Tick Timer */
-/* ---------------------- nrf52 Specific Interrupt Numbers ---------------------- */
- POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */
- RADIO_IRQn = 1, /*!< 1 RADIO */
- UARTE0_UART0_IRQn = 2, /*!< 2 UARTE0_UART0 */
- SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQn= 3, /*!< 3 SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0 */
- SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQn= 4, /*!< 4 SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 */
- NFCT_IRQn = 5, /*!< 5 NFCT */
- GPIOTE_IRQn = 6, /*!< 6 GPIOTE */
- SAADC_IRQn = 7, /*!< 7 SAADC */
- TIMER0_IRQn = 8, /*!< 8 TIMER0 */
- TIMER1_IRQn = 9, /*!< 9 TIMER1 */
- TIMER2_IRQn = 10, /*!< 10 TIMER2 */
- RTC0_IRQn = 11, /*!< 11 RTC0 */
- TEMP_IRQn = 12, /*!< 12 TEMP */
- RNG_IRQn = 13, /*!< 13 RNG */
- ECB_IRQn = 14, /*!< 14 ECB */
- CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */
- WDT_IRQn = 16, /*!< 16 WDT */
- RTC1_IRQn = 17, /*!< 17 RTC1 */
- QDEC_IRQn = 18, /*!< 18 QDEC */
- COMP_LPCOMP_IRQn = 19, /*!< 19 COMP_LPCOMP */
- SWI0_EGU0_IRQn = 20, /*!< 20 SWI0_EGU0 */
- SWI1_EGU1_IRQn = 21, /*!< 21 SWI1_EGU1 */
- SWI2_EGU2_IRQn = 22, /*!< 22 SWI2_EGU2 */
- SWI3_EGU3_IRQn = 23, /*!< 23 SWI3_EGU3 */
- SWI4_EGU4_IRQn = 24, /*!< 24 SWI4_EGU4 */
- SWI5_EGU5_IRQn = 25, /*!< 25 SWI5_EGU5 */
- TIMER3_IRQn = 26, /*!< 26 TIMER3 */
- TIMER4_IRQn = 27, /*!< 27 TIMER4 */
- PWM0_IRQn = 28, /*!< 28 PWM0 */
- PDM_IRQn = 29, /*!< 29 PDM */
- MWU_IRQn = 32, /*!< 32 MWU */
- PWM1_IRQn = 33, /*!< 33 PWM1 */
- PWM2_IRQn = 34, /*!< 34 PWM2 */
- SPIM2_SPIS2_SPI2_IRQn = 35, /*!< 35 SPIM2_SPIS2_SPI2 */
- RTC2_IRQn = 36, /*!< 36 RTC2 */
- I2S_IRQn = 37 /*!< 37 I2S */
-} IRQn_Type;
-
-
-/** @addtogroup Configuration_of_CMSIS
- * @{
- */
-
-
-/* ================================================================================ */
-/* ================ Processor and Core Peripheral Section ================ */
-/* ================================================================================ */
-
-/* ----------------Configuration of the Cortex-M4 Processor and Core Peripherals---------------- */
-#define __CM4_REV 0x0001 /*!< Cortex-M4 Core Revision */
-#define __MPU_PRESENT 1 /*!< MPU present or not */
-#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-#define __FPU_PRESENT 1 /*!< FPU present or not */
-/** @} */ /* End of group Configuration_of_CMSIS */
-
-#include "cmsis-core/core_cm4.h" /*!< Cortex-M4 processor and core peripherals */
-#include "system_nrf52.h" /*!< nrf52 System */
-
-
-/* ================================================================================ */
-/* ================ Device Specific Peripheral Section ================ */
-/* ================================================================================ */
-
-
-/** @addtogroup Device_Peripheral_Registers
- * @{
- */
-
-
-/* ------------------- Start of section using anonymous unions ------------------ */
-#if defined(__CC_ARM)
- #pragma push
- #pragma anon_unions
-#elif defined(__ICCARM__)
- #pragma language=extended
-#elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
-#elif defined(__TMS470__)
-/* anonymous unions are enabled by default */
-#elif defined(__TASKING__)
- #pragma warning 586
-#else
- #warning Not supported compiler type
-#endif
-
-
-typedef struct {
- __I uint32_t PART; /*!< Part code */
- __I uint32_t VARIANT; /*!< Part variant */
- __I uint32_t PACKAGE; /*!< Package option */
- __I uint32_t RAM; /*!< RAM variant */
- __I uint32_t FLASH; /*!< Flash variant */
- __IO uint32_t UNUSED0[3]; /*!< Description collection[0]: Unspecified */
-} FICR_INFO_Type;
-
-typedef struct {
- __I uint32_t TAGHEADER0; /*!< Default header for NFC Tag. Software can read these values to
- populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
- __I uint32_t TAGHEADER1; /*!< Default header for NFC Tag. Software can read these values to
- populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
- __I uint32_t TAGHEADER2; /*!< Default header for NFC Tag. Software can read these values to
- populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
- __I uint32_t TAGHEADER3; /*!< Default header for NFC Tag. Software can read these values to
- populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
-} FICR_NFC_Type;
-
-typedef struct {
- __IO uint32_t POWER; /*!< Description cluster[0]: RAM0 power control register */
- __O uint32_t POWERSET; /*!< Description cluster[0]: RAM0 power control set register */
- __O uint32_t POWERCLR; /*!< Description cluster[0]: RAM0 power control clear register */
- __I uint32_t RESERVED0;
-} POWER_RAM_Type;
-
-typedef struct {
- __IO uint32_t RTS; /*!< Pin select for RTS signal */
- __IO uint32_t TXD; /*!< Pin select for TXD signal */
- __IO uint32_t CTS; /*!< Pin select for CTS signal */
- __IO uint32_t RXD; /*!< Pin select for RXD signal */
-} UARTE_PSEL_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of bytes in buffer */
- __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
-} UARTE_RXD_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of bytes in buffer */
- __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
-} UARTE_TXD_Type;
-
-typedef struct {
- __IO uint32_t SCK; /*!< Pin select for SCK */
- __IO uint32_t MOSI; /*!< Pin select for MOSI signal */
- __IO uint32_t MISO; /*!< Pin select for MISO signal */
-} SPIM_PSEL_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of buffer words to transfer */
- __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
- __IO uint32_t LIST; /*!< EasyDMA list type */
-} SPIM_RXD_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of buffer words to transfer */
- __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
- __IO uint32_t LIST; /*!< EasyDMA list type */
-} SPIM_TXD_Type;
-
-typedef struct {
- __IO uint32_t SCK; /*!< Pin select for SCK */
- __IO uint32_t MISO; /*!< Pin select for MISO signal */
- __IO uint32_t MOSI; /*!< Pin select for MOSI signal */
- __IO uint32_t CSN; /*!< Pin select for CSN signal */
-} SPIS_PSEL_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< RXD data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of bytes in receive buffer */
- __I uint32_t AMOUNT; /*!< Number of bytes received in last granted transaction */
-} SPIS_RXD_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< TXD data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of bytes in transmit buffer */
- __I uint32_t AMOUNT; /*!< Number of bytes transmitted in last granted transaction */
-} SPIS_TXD_Type;
-
-typedef struct {
- __IO uint32_t SCL; /*!< Pin select for SCL signal */
- __IO uint32_t SDA; /*!< Pin select for SDA signal */
-} TWIM_PSEL_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of buffer words to transfer */
- __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
- __IO uint32_t LIST; /*!< EasyDMA list type */
-} TWIM_RXD_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of buffer words to transfer */
- __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
- __IO uint32_t LIST; /*!< EasyDMA list type */
-} TWIM_TXD_Type;
-
-typedef struct {
- __IO uint32_t SCL; /*!< Pin select for SCL signal */
- __IO uint32_t SDA; /*!< Pin select for SDA signal */
-} TWIS_PSEL_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< RXD Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of bytes in RXD buffer */
- __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last RXD transaction */
-} TWIS_RXD_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< TXD Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of bytes in TXD buffer */
- __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last TXD transaction */
-} TWIS_TXD_Type;
-
-typedef struct {
- __IO uint32_t SCK; /*!< Pin select for SCK */
- __IO uint32_t MOSI; /*!< Pin select for MOSI */
- __IO uint32_t MISO; /*!< Pin select for MISO */
-} SPI_PSEL_Type;
-
-typedef struct {
- __IO uint32_t RX; /*!< Result of last incoming frames */
-} NFCT_FRAMESTATUS_Type;
-
-typedef struct {
- __IO uint32_t FRAMECONFIG; /*!< Configuration of outgoing frames */
- __IO uint32_t AMOUNT; /*!< Size of outgoing frame */
-} NFCT_TXD_Type;
-
-typedef struct {
- __IO uint32_t FRAMECONFIG; /*!< Configuration of incoming frames */
- __I uint32_t AMOUNT; /*!< Size of last incoming frame */
-} NFCT_RXD_Type;
-
-typedef struct {
- __IO uint32_t LIMITH; /*!< Description cluster[0]: Last results is equal or above CH[0].LIMIT.HIGH */
- __IO uint32_t LIMITL; /*!< Description cluster[0]: Last results is equal or below CH[0].LIMIT.LOW */
-} SAADC_EVENTS_CH_Type;
-
-typedef struct {
- __IO uint32_t PSELP; /*!< Description cluster[0]: Input positive pin selection for CH[0] */
- __IO uint32_t PSELN; /*!< Description cluster[0]: Input negative pin selection for CH[0] */
- __IO uint32_t CONFIG; /*!< Description cluster[0]: Input configuration for CH[0] */
- __IO uint32_t LIMIT; /*!< Description cluster[0]: High/low limits for event monitoring
- a channel */
-} SAADC_CH_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer */
- __IO uint32_t MAXCNT; /*!< Maximum number of buffer words to transfer */
- __I uint32_t AMOUNT; /*!< Number of buffer words transferred since last START */
-} SAADC_RESULT_Type;
-
-typedef struct {
- __IO uint32_t LED; /*!< Pin select for LED signal */
- __IO uint32_t A; /*!< Pin select for A signal */
- __IO uint32_t B; /*!< Pin select for B signal */
-} QDEC_PSEL_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Description cluster[0]: Beginning address in Data RAM of sequence
- A */
- __IO uint32_t CNT; /*!< Description cluster[0]: Amount of values (duty cycles) in sequence
- A */
- __IO uint32_t REFRESH; /*!< Description cluster[0]: Amount of additional PWM periods between
- samples loaded to compare register (load every CNT+1 PWM periods) */
- __IO uint32_t ENDDELAY; /*!< Description cluster[0]: Time added after the sequence */
- __I uint32_t RESERVED1[4];
-} PWM_SEQ_Type;
-
-typedef struct {
- __IO uint32_t OUT[4]; /*!< Description collection[0]: Output pin select for PWM channel
- 0 */
-} PWM_PSEL_Type;
-
-typedef struct {
- __IO uint32_t CLK; /*!< Pin number configuration for PDM CLK signal */
- __IO uint32_t DIN; /*!< Pin number configuration for PDM DIN signal */
-} PDM_PSEL_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< RAM address pointer to write samples to with EasyDMA */
- __IO uint32_t MAXCNT; /*!< Number of samples to allocate memory for in EasyDMA mode */
-} PDM_SAMPLE_Type;
-
-typedef struct {
- __O uint32_t EN; /*!< Description cluster[0]: Enable channel group 0 */
- __O uint32_t DIS; /*!< Description cluster[0]: Disable channel group 0 */
-} PPI_TASKS_CHG_Type;
-
-typedef struct {
- __IO uint32_t EEP; /*!< Description cluster[0]: Channel 0 event end-point */
- __IO uint32_t TEP; /*!< Description cluster[0]: Channel 0 task end-point */
-} PPI_CH_Type;
-
-typedef struct {
- __IO uint32_t TEP; /*!< Description cluster[0]: Channel 0 task end-point */
-} PPI_FORK_Type;
-
-typedef struct {
- __IO uint32_t WA; /*!< Description cluster[0]: Write access to region 0 detected */
- __IO uint32_t RA; /*!< Description cluster[0]: Read access to region 0 detected */
-} MWU_EVENTS_REGION_Type;
-
-typedef struct {
- __IO uint32_t WA; /*!< Description cluster[0]: Write access to peripheral region 0
- detected */
- __IO uint32_t RA; /*!< Description cluster[0]: Read access to peripheral region 0 detected */
-} MWU_EVENTS_PREGION_Type;
-
-typedef struct {
- __IO uint32_t SUBSTATWA; /*!< Description cluster[0]: Source of interrupt in region 0, write
- access detected while corresponding subregion was enabled for
- watching */
- __IO uint32_t SUBSTATRA; /*!< Description cluster[0]: Source of interrupt in region 0, read
- access detected while corresponding subregion was enabled for
- watching */
-} MWU_PERREGION_Type;
-
-typedef struct {
- __IO uint32_t START; /*!< Description cluster[0]: Start address for region 0 */
- __IO uint32_t END; /*!< Description cluster[0]: End address of region 0 */
- __I uint32_t RESERVED2[2];
-} MWU_REGION_Type;
-
-typedef struct {
- __I uint32_t START; /*!< Description cluster[0]: Reserved for future use */
- __I uint32_t END; /*!< Description cluster[0]: Reserved for future use */
- __IO uint32_t SUBS; /*!< Description cluster[0]: Sub regions of region 0 */
- __I uint32_t RESERVED3;
-} MWU_PREGION_Type;
-
-typedef struct {
- __IO uint32_t MODE; /*!< I<sup>2</sup>S mode. */
- __IO uint32_t RXEN; /*!< Reception (RX) enable. */
- __IO uint32_t TXEN; /*!< Transmission (TX) enable. */
- __IO uint32_t MCKEN; /*!< Master clock generator enable. */
- __IO uint32_t MCKFREQ; /*!< Master clock generator frequency. */
- __IO uint32_t RATIO; /*!< MCK / LRCK ratio. */
- __IO uint32_t SWIDTH; /*!< Sample width. */
- __IO uint32_t ALIGN; /*!< Alignment of sample within a frame. */
- __IO uint32_t FORMAT; /*!< Frame format. */
- __IO uint32_t CHANNELS; /*!< Enable channels. */
-} I2S_CONFIG_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Receive buffer RAM start address. */
-} I2S_RXD_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Transmit buffer RAM start address. */
-} I2S_TXD_Type;
-
-typedef struct {
- __IO uint32_t MAXCNT; /*!< Size of RXD and TXD buffers. */
-} I2S_RXTXD_Type;
-
-typedef struct {
- __IO uint32_t MCK; /*!< Pin select for MCK signal. */
- __IO uint32_t SCK; /*!< Pin select for SCK signal. */
- __IO uint32_t LRCK; /*!< Pin select for LRCK signal. */
- __IO uint32_t SDIN; /*!< Pin select for SDIN signal. */
- __IO uint32_t SDOUT; /*!< Pin select for SDOUT signal. */
-} I2S_PSEL_Type;
-
-
-/* ================================================================================ */
-/* ================ FICR ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Factory Information Configuration Registers (FICR)
- */
-
-typedef struct { /*!< FICR Structure */
- __I uint32_t RESERVED0[4];
- __I uint32_t CODEPAGESIZE; /*!< Code memory page size */
- __I uint32_t CODESIZE; /*!< Code memory size */
- __I uint32_t RESERVED1[17];
- __I uint32_t CONFIGID; /*!< Configuration identifier */
- __I uint32_t DEVICEID[2]; /*!< Description collection[0]: Device identifier */
- __I uint32_t RESERVED2[6];
- __I uint32_t ER[4]; /*!< Description collection[0]: Encryption Root, word 0 */
- __I uint32_t IR[4]; /*!< Description collection[0]: Identity Root, word 0 */
- __I uint32_t DEVICEADDRTYPE; /*!< Device address type */
- __I uint32_t DEVICEADDR[2]; /*!< Description collection[0]: Device address 0 */
- __I uint32_t RESERVED3[21];
- FICR_INFO_Type INFO; /*!< Device info */
- __I uint32_t RESERVED4[204];
- FICR_NFC_Type NFC; /*!< Unspecified */
-} NRF_FICR_Type;
-
-
-/* ================================================================================ */
-/* ================ UICR ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief User Information Configuration Registers (UICR)
- */
-
-typedef struct { /*!< UICR Structure */
- __IO uint32_t UNUSED0; /*!< Unspecified */
- __IO uint32_t UNUSED1; /*!< Unspecified */
- __IO uint32_t UNUSED2; /*!< Unspecified */
- __I uint32_t RESERVED0;
- __IO uint32_t UNUSED3; /*!< Unspecified */
- __IO uint32_t NRFFW[15]; /*!< Description collection[0]: Reserved for Nordic firmware design */
- __IO uint32_t NRFHW[12]; /*!< Description collection[0]: Reserved for Nordic hardware design */
- __IO uint32_t CUSTOMER[32]; /*!< Description collection[0]: Reserved for customer */
- __I uint32_t RESERVED1[64];
- __IO uint32_t PSELRESET[2]; /*!< Description collection[0]: Mapping of the nRESET function (see
- POWER chapter for details) */
- __IO uint32_t APPROTECT; /*!< Access port protection */
- __IO uint32_t NFCPINS; /*!< Setting of pins dedicated to NFC functionality: NFC antenna
- or GPIO */
-} NRF_UICR_Type;
-
-
-/* ================================================================================ */
-/* ================ BPROT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Block Protect (BPROT)
- */
-
-typedef struct { /*!< BPROT Structure */
- __I uint32_t RESERVED0[384];
- __IO uint32_t CONFIG0; /*!< Block protect configuration register 0 */
- __IO uint32_t CONFIG1; /*!< Block protect configuration register 1 */
- __IO uint32_t DISABLEINDEBUG; /*!< Disable protection mechanism in debug mode */
- __IO uint32_t UNUSED0; /*!< Unspecified */
- __IO uint32_t CONFIG2; /*!< Block protect configuration register 2 */
- __IO uint32_t CONFIG3; /*!< Block protect configuration register 3 */
-} NRF_BPROT_Type;
-
-
-/* ================================================================================ */
-/* ================ POWER ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Power control (POWER)
- */
-
-typedef struct { /*!< POWER Structure */
- __I uint32_t RESERVED0[30];
- __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode */
- __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency) */
- __I uint32_t RESERVED1[34];
- __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning */
- __I uint32_t RESERVED2[2];
- __IO uint32_t EVENTS_SLEEPENTER; /*!< CPU entered WFI/WFE sleep */
- __IO uint32_t EVENTS_SLEEPEXIT; /*!< CPU exited WFI/WFE sleep */
- __I uint32_t RESERVED3[122];
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED4[61];
- __IO uint32_t RESETREAS; /*!< Reset reason */
- __I uint32_t RESERVED5[9];
- __I uint32_t RAMSTATUS; /*!< Deprecated register - RAM status register */
- __I uint32_t RESERVED6[53];
- __O uint32_t SYSTEMOFF; /*!< System OFF register */
- __I uint32_t RESERVED7[3];
- __IO uint32_t POFCON; /*!< Power failure comparator configuration */
- __I uint32_t RESERVED8[2];
- __IO uint32_t GPREGRET; /*!< General purpose retention register */
- __IO uint32_t GPREGRET2; /*!< General purpose retention register */
- __IO uint32_t RAMON; /*!< Deprecated register - RAM on/off register (this register is
- retained) */
- __I uint32_t RESERVED9[11];
- __IO uint32_t RAMONB; /*!< Deprecated register - RAM on/off register (this register is
- retained) */
- __I uint32_t RESERVED10[8];
- __IO uint32_t DCDCEN; /*!< DC/DC enable register */
- __I uint32_t RESERVED11[225];
- POWER_RAM_Type RAM[8]; /*!< Unspecified */
-} NRF_POWER_Type;
-
-
-/* ================================================================================ */
-/* ================ CLOCK ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Clock control (CLOCK)
- */
-
-typedef struct { /*!< CLOCK Structure */
- __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK crystal oscillator */
- __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK crystal oscillator */
- __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK source */
- __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK source */
- __O uint32_t TASKS_CAL; /*!< Start calibration of LFRC or LFULP oscillator */
- __O uint32_t TASKS_CTSTART; /*!< Start calibration timer */
- __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer */
- __I uint32_t RESERVED0[57];
- __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started */
- __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK started */
- __I uint32_t RESERVED1;
- __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator complete event */
- __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout */
- __I uint32_t RESERVED2[124];
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED3[63];
- __I uint32_t HFCLKRUN; /*!< Status indicating that HFCLKSTART task has been triggered */
- __I uint32_t HFCLKSTAT; /*!< Which HFCLK source is running */
- __I uint32_t RESERVED4;
- __I uint32_t LFCLKRUN; /*!< Status indicating that LFCLKSTART task has been triggered */
- __I uint32_t LFCLKSTAT; /*!< Which LFCLK source is running */
- __I uint32_t LFCLKSRCCOPY; /*!< Copy of LFCLKSRC register, set when LFCLKSTART task was triggered */
- __I uint32_t RESERVED5[62];
- __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK */
- __I uint32_t RESERVED6[7];
- __IO uint32_t CTIV; /*!< Calibration timer interval (retained register, same reset behaviour
- as RESETREAS) */
- __I uint32_t RESERVED7[8];
- __IO uint32_t TRACECONFIG; /*!< Clocking options for the Trace Port debug interface */
-} NRF_CLOCK_Type;
-
-
-/* ================================================================================ */
-/* ================ RADIO ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief 2.4 GHz Radio (RADIO)
- */
-
-typedef struct { /*!< RADIO Structure */
- __O uint32_t TASKS_TXEN; /*!< Enable RADIO in TX mode */
- __O uint32_t TASKS_RXEN; /*!< Enable RADIO in RX mode */
- __O uint32_t TASKS_START; /*!< Start RADIO */
- __O uint32_t TASKS_STOP; /*!< Stop RADIO */
- __O uint32_t TASKS_DISABLE; /*!< Disable RADIO */
- __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one single sample of the receive signal
- strength. */
- __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement */
- __O uint32_t TASKS_BCSTART; /*!< Start the bit counter */
- __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter */
- __I uint32_t RESERVED0[55];
- __IO uint32_t EVENTS_READY; /*!< RADIO has ramped up and is ready to be started */
- __IO uint32_t EVENTS_ADDRESS; /*!< Address sent or received */
- __IO uint32_t EVENTS_PAYLOAD; /*!< Packet payload sent or received */
- __IO uint32_t EVENTS_END; /*!< Packet sent or received */
- __IO uint32_t EVENTS_DISABLED; /*!< RADIO has been disabled */
- __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet */
- __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet */
- __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of receive signal strength complete. A new RSSI sample
- is ready for readout from the "RADIO.RSSISAMPLE" register */
- __I uint32_t RESERVED1[2];
- __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in the "RADIO.BCC"
- register */
- __I uint32_t RESERVED2;
- __IO uint32_t EVENTS_CRCOK; /*!< Packet received with CRC ok */
- __IO uint32_t EVENTS_CRCERROR; /*!< Packet received with CRC error */
- __I uint32_t RESERVED3[50];
- __IO uint32_t SHORTS; /*!< Shortcut register */
- __I uint32_t RESERVED4[64];
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED5[61];
- __I uint32_t CRCSTATUS; /*!< CRC status */
- __I uint32_t RESERVED6;
- __I uint32_t RXMATCH; /*!< Received address */
- __I uint32_t RXCRC; /*!< CRC field of previously received packet */
- __I uint32_t DAI; /*!< Device address match index */
- __I uint32_t RESERVED7[60];
- __IO uint32_t PACKETPTR; /*!< Packet pointer */
- __IO uint32_t FREQUENCY; /*!< Frequency */
- __IO uint32_t TXPOWER; /*!< Output power */
- __IO uint32_t MODE; /*!< Data rate and modulation */
- __IO uint32_t PCNF0; /*!< Packet configuration register 0 */
- __IO uint32_t PCNF1; /*!< Packet configuration register 1 */
- __IO uint32_t BASE0; /*!< Base address 0 */
- __IO uint32_t BASE1; /*!< Base address 1 */
- __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0-3 */
- __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4-7 */
- __IO uint32_t TXADDRESS; /*!< Transmit address select */
- __IO uint32_t RXADDRESSES; /*!< Receive address select */
- __IO uint32_t CRCCNF; /*!< CRC configuration */
- __IO uint32_t CRCPOLY; /*!< CRC polynomial */
- __IO uint32_t CRCINIT; /*!< CRC initial value */
- __IO uint32_t UNUSED0; /*!< Unspecified */
- __IO uint32_t TIFS; /*!< Inter Frame Spacing in us */
- __I uint32_t RSSISAMPLE; /*!< RSSI sample */
- __I uint32_t RESERVED8;
- __I uint32_t STATE; /*!< Current radio state */
- __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value */
- __I uint32_t RESERVED9[2];
- __IO uint32_t BCC; /*!< Bit counter compare */
- __I uint32_t RESERVED10[39];
- __IO uint32_t DAB[8]; /*!< Description collection[0]: Device address base segment 0 */
- __IO uint32_t DAP[8]; /*!< Description collection[0]: Device address prefix 0 */
- __IO uint32_t DACNF; /*!< Device address match configuration */
- __I uint32_t RESERVED11[3];
- __IO uint32_t MODECNF0; /*!< Radio mode configuration register 0 */
- __I uint32_t RESERVED12[618];
- __IO uint32_t POWER; /*!< Peripheral power control */
-} NRF_RADIO_Type;
-
-
-/* ================================================================================ */
-/* ================ UARTE ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief UART with EasyDMA (UARTE)
- */
-
-typedef struct { /*!< UARTE Structure */
- __O uint32_t TASKS_STARTRX; /*!< Start UART receiver */
- __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver */
- __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter */
- __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter */
- __I uint32_t RESERVED0[7];
- __O uint32_t TASKS_FLUSHRX; /*!< Flush RX FIFO into RX buffer */
- __I uint32_t RESERVED1[52];
- __IO uint32_t EVENTS_CTS; /*!< CTS is activated (set low). Clear To Send. */
- __IO uint32_t EVENTS_NCTS; /*!< CTS is deactivated (set high). Not Clear To Send. */
- __I uint32_t RESERVED2[2];
- __IO uint32_t EVENTS_ENDRX; /*!< Receive buffer is filled up */
- __I uint32_t RESERVED3[3];
- __IO uint32_t EVENTS_ENDTX; /*!< Last TX byte transmitted */
- __IO uint32_t EVENTS_ERROR; /*!< Error detected */
- __I uint32_t RESERVED4[7];
- __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout */
- __I uint32_t RESERVED5;
- __IO uint32_t EVENTS_RXSTARTED; /*!< UART receiver has started */
- __IO uint32_t EVENTS_TXSTARTED; /*!< UART transmitter has started */
- __I uint32_t RESERVED6;
- __IO uint32_t EVENTS_TXSTOPPED; /*!< Transmitter stopped */
- __I uint32_t RESERVED7[41];
- __IO uint32_t SHORTS; /*!< Shortcut register */
- __I uint32_t RESERVED8[63];
- __IO uint32_t INTEN; /*!< Enable or disable interrupt */
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED9[93];
- __IO uint32_t ERRORSRC; /*!< Error source */
- __I uint32_t RESERVED10[31];
- __IO uint32_t ENABLE; /*!< Enable UART */
- __I uint32_t RESERVED11;
- UARTE_PSEL_Type PSEL; /*!< Unspecified */
- __I uint32_t RESERVED12[3];
- __IO uint32_t BAUDRATE; /*!< Baud rate */
- __I uint32_t RESERVED13[3];
- UARTE_RXD_Type RXD; /*!< RXD EasyDMA channel */
- __I uint32_t RESERVED14;
- UARTE_TXD_Type TXD; /*!< TXD EasyDMA channel */
- __I uint32_t RESERVED15[7];
- __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control */
-} NRF_UARTE_Type;
-
-
-/* ================================================================================ */
-/* ================ SPIM ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Serial Peripheral Interface Master with EasyDMA 0 (SPIM)
- */
-
-typedef struct { /*!< SPIM Structure */
- __I uint32_t RESERVED0[4];
- __O uint32_t TASKS_START; /*!< Start SPI transaction */
- __O uint32_t TASKS_STOP; /*!< Stop SPI transaction */
- __I uint32_t RESERVED1;
- __O uint32_t TASKS_SUSPEND; /*!< Suspend SPI transaction */
- __O uint32_t TASKS_RESUME; /*!< Resume SPI transaction */
- __I uint32_t RESERVED2[56];
- __IO uint32_t EVENTS_STOPPED; /*!< SPI transaction has stopped */
- __I uint32_t RESERVED3[2];
- __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached */
- __I uint32_t RESERVED4;
- __IO uint32_t EVENTS_END; /*!< End of RXD buffer and TXD buffer reached */
- __I uint32_t RESERVED5;
- __IO uint32_t EVENTS_ENDTX; /*!< End of TXD buffer reached */
- __I uint32_t RESERVED6[10];
- __IO uint32_t EVENTS_STARTED; /*!< Transaction started */
- __I uint32_t RESERVED7[44];
- __IO uint32_t SHORTS; /*!< Shortcut register */
- __I uint32_t RESERVED8[64];
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED9[125];
- __IO uint32_t ENABLE; /*!< Enable SPIM */
- __I uint32_t RESERVED10;
- SPIM_PSEL_Type PSEL; /*!< Unspecified */
- __I uint32_t RESERVED11[4];
- __IO uint32_t FREQUENCY; /*!< SPI frequency */
- __I uint32_t RESERVED12[3];
- SPIM_RXD_Type RXD; /*!< RXD EasyDMA channel */
- SPIM_TXD_Type TXD; /*!< TXD EasyDMA channel */
- __IO uint32_t CONFIG; /*!< Configuration register */
- __I uint32_t RESERVED13[26];
- __IO uint32_t ORC; /*!< Over-read character. Character clocked out in case and over-read
- of the TXD buffer. */
-} NRF_SPIM_Type;
-
-
-/* ================================================================================ */
-/* ================ SPIS ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief SPI Slave 0 (SPIS)
- */
-
-typedef struct { /*!< SPIS Structure */
- __I uint32_t RESERVED0[9];
- __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore */
- __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore, enabling the SPI slave to acquire it */
- __I uint32_t RESERVED1[54];
- __IO uint32_t EVENTS_END; /*!< Granted transaction completed */
- __I uint32_t RESERVED2[8];
- __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired */
- __I uint32_t RESERVED3[53];
- __IO uint32_t SHORTS; /*!< Shortcut register */
- __I uint32_t RESERVED4[64];
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED5[61];
- __I uint32_t SEMSTAT; /*!< Semaphore status register */
- __I uint32_t RESERVED6[15];
- __IO uint32_t STATUS; /*!< Status from last transaction */
- __I uint32_t RESERVED7[47];
- __IO uint32_t ENABLE; /*!< Enable SPI slave */
- __I uint32_t RESERVED8;
- SPIS_PSEL_Type PSEL; /*!< Unspecified */
- __I uint32_t RESERVED9[7];
- SPIS_RXD_Type RXD; /*!< Unspecified */
- __I uint32_t RESERVED10;
- SPIS_TXD_Type TXD; /*!< Unspecified */
- __I uint32_t RESERVED11;
- __IO uint32_t CONFIG; /*!< Configuration register */
- __I uint32_t RESERVED12;
- __IO uint32_t DEF; /*!< Default character. Character clocked out in case of an ignored
- transaction. */
- __I uint32_t RESERVED13[24];
- __IO uint32_t ORC; /*!< Over-read character */
-} NRF_SPIS_Type;
-
-
-/* ================================================================================ */
-/* ================ TWIM ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief I2C compatible Two-Wire Master Interface with EasyDMA 0 (TWIM)
- */
-
-typedef struct { /*!< TWIM Structure */
- __O uint32_t TASKS_STARTRX; /*!< Start TWI receive sequence */
- __I uint32_t RESERVED0;
- __O uint32_t TASKS_STARTTX; /*!< Start TWI transmit sequence */
- __I uint32_t RESERVED1[2];
- __O uint32_t TASKS_STOP; /*!< Stop TWI transaction */
- __I uint32_t RESERVED2;
- __O uint32_t TASKS_SUSPEND; /*!< Suspend TWI transaction */
- __O uint32_t TASKS_RESUME; /*!< Resume TWI transaction */
- __I uint32_t RESERVED3[56];
- __IO uint32_t EVENTS_STOPPED; /*!< TWI stopped */
- __I uint32_t RESERVED4[7];
- __IO uint32_t EVENTS_ERROR; /*!< TWI error */
- __I uint32_t RESERVED5[9];
- __IO uint32_t EVENTS_RXSTARTED; /*!< Receive sequence started */
- __IO uint32_t EVENTS_TXSTARTED; /*!< Transmit sequence started */
- __I uint32_t RESERVED6[2];
- __IO uint32_t EVENTS_LASTRX; /*!< Byte boundary, starting to receive the last byte */
- __IO uint32_t EVENTS_LASTTX; /*!< Byte boundary, starting to transmit the last byte */
- __I uint32_t RESERVED7[39];
- __IO uint32_t SHORTS; /*!< Shortcut register */
- __I uint32_t RESERVED8[63];
- __IO uint32_t INTEN; /*!< Enable or disable interrupt */
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED9[110];
- __IO uint32_t ERRORSRC; /*!< Error source */
- __I uint32_t RESERVED10[14];
- __IO uint32_t ENABLE; /*!< Enable TWIM */
- __I uint32_t RESERVED11;
- TWIM_PSEL_Type PSEL; /*!< Unspecified */
- __I uint32_t RESERVED12[5];
- __IO uint32_t FREQUENCY; /*!< TWI frequency */
- __I uint32_t RESERVED13[3];
- TWIM_RXD_Type RXD; /*!< RXD EasyDMA channel */
- TWIM_TXD_Type TXD; /*!< TXD EasyDMA channel */
- __I uint32_t RESERVED14[13];
- __IO uint32_t ADDRESS; /*!< Address used in the TWI transfer */
-} NRF_TWIM_Type;
-
-
-/* ================================================================================ */
-/* ================ TWIS ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief I2C compatible Two-Wire Slave Interface with EasyDMA 0 (TWIS)
- */
-
-typedef struct { /*!< TWIS Structure */
- __I uint32_t RESERVED0[5];
- __O uint32_t TASKS_STOP; /*!< Stop TWI transaction */
- __I uint32_t RESERVED1;
- __O uint32_t TASKS_SUSPEND; /*!< Suspend TWI transaction */
- __O uint32_t TASKS_RESUME; /*!< Resume TWI transaction */
- __I uint32_t RESERVED2[3];
- __O uint32_t TASKS_PREPARERX; /*!< Prepare the TWI slave to respond to a write command */
- __O uint32_t TASKS_PREPARETX; /*!< Prepare the TWI slave to respond to a read command */
- __I uint32_t RESERVED3[51];
- __IO uint32_t EVENTS_STOPPED; /*!< TWI stopped */
- __I uint32_t RESERVED4[7];
- __IO uint32_t EVENTS_ERROR; /*!< TWI error */
- __I uint32_t RESERVED5[9];
- __IO uint32_t EVENTS_RXSTARTED; /*!< Receive sequence started */
- __IO uint32_t EVENTS_TXSTARTED; /*!< Transmit sequence started */
- __I uint32_t RESERVED6[4];
- __IO uint32_t EVENTS_WRITE; /*!< Write command received */
- __IO uint32_t EVENTS_READ; /*!< Read command received */
- __I uint32_t RESERVED7[37];
- __IO uint32_t SHORTS; /*!< Shortcut register */
- __I uint32_t RESERVED8[63];
- __IO uint32_t INTEN; /*!< Enable or disable interrupt */
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED9[113];
- __IO uint32_t ERRORSRC; /*!< Error source */
- __I uint32_t MATCH; /*!< Status register indicating which address had a match */
- __I uint32_t RESERVED10[10];
- __IO uint32_t ENABLE; /*!< Enable TWIS */
- __I uint32_t RESERVED11;
- TWIS_PSEL_Type PSEL; /*!< Unspecified */
- __I uint32_t RESERVED12[9];
- TWIS_RXD_Type RXD; /*!< RXD EasyDMA channel */
- __I uint32_t RESERVED13;
- TWIS_TXD_Type TXD; /*!< TXD EasyDMA channel */
- __I uint32_t RESERVED14[14];
- __IO uint32_t ADDRESS[2]; /*!< Description collection[0]: TWI slave address 0 */
- __I uint32_t RESERVED15;
- __IO uint32_t CONFIG; /*!< Configuration register for the address match mechanism */
- __I uint32_t RESERVED16[10];
- __IO uint32_t ORC; /*!< Over-read character. Character sent out in case of an over-read
- of the transmit buffer. */
-} NRF_TWIS_Type;
-
-
-/* ================================================================================ */
-/* ================ SPI ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Serial Peripheral Interface 0 (SPI)
- */
-
-typedef struct { /*!< SPI Structure */
- __I uint32_t RESERVED0[66];
- __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received */
- __I uint32_t RESERVED1[126];
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED2[125];
- __IO uint32_t ENABLE; /*!< Enable SPI */
- __I uint32_t RESERVED3;
- SPI_PSEL_Type PSEL; /*!< Unspecified */
- __I uint32_t RESERVED4;
- __I uint32_t RXD; /*!< RXD register */
- __IO uint32_t TXD; /*!< TXD register */
- __I uint32_t RESERVED5;
- __IO uint32_t FREQUENCY; /*!< SPI frequency */
- __I uint32_t RESERVED6[11];
- __IO uint32_t CONFIG; /*!< Configuration register */
-} NRF_SPI_Type;
-
-
-/* ================================================================================ */
-/* ================ TWI ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief I2C compatible Two-Wire Interface 0 (TWI)
- */
-
-typedef struct { /*!< TWI Structure */
- __O uint32_t TASKS_STARTRX; /*!< Start TWI receive sequence */
- __I uint32_t RESERVED0;
- __O uint32_t TASKS_STARTTX; /*!< Start TWI transmit sequence */
- __I uint32_t RESERVED1[2];
- __O uint32_t TASKS_STOP; /*!< Stop TWI transaction */
- __I uint32_t RESERVED2;
- __O uint32_t TASKS_SUSPEND; /*!< Suspend TWI transaction */
- __O uint32_t TASKS_RESUME; /*!< Resume TWI transaction */
- __I uint32_t RESERVED3[56];
- __IO uint32_t EVENTS_STOPPED; /*!< TWI stopped */
- __IO uint32_t EVENTS_RXDREADY; /*!< TWI RXD byte received */
- __I uint32_t RESERVED4[4];
- __IO uint32_t EVENTS_TXDSENT; /*!< TWI TXD byte sent */
- __I uint32_t RESERVED5;
- __IO uint32_t EVENTS_ERROR; /*!< TWI error */
- __I uint32_t RESERVED6[4];
- __IO uint32_t EVENTS_BB; /*!< TWI byte boundary, generated before each byte that is sent or
- received */
- __I uint32_t RESERVED7[3];
- __IO uint32_t EVENTS_SUSPENDED; /*!< TWI entered the suspended state */
- __I uint32_t RESERVED8[45];
- __IO uint32_t SHORTS; /*!< Shortcut register */
- __I uint32_t RESERVED9[64];
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED10[110];
- __IO uint32_t ERRORSRC; /*!< Error source */
- __I uint32_t RESERVED11[14];
- __IO uint32_t ENABLE; /*!< Enable TWI */
- __I uint32_t RESERVED12;
- __IO uint32_t PSELSCL; /*!< Pin select for SCL */
- __IO uint32_t PSELSDA; /*!< Pin select for SDA */
- __I uint32_t RESERVED13[2];
- __I uint32_t RXD; /*!< RXD register */
- __IO uint32_t TXD; /*!< TXD register */
- __I uint32_t RESERVED14;
- __IO uint32_t FREQUENCY; /*!< TWI frequency */
- __I uint32_t RESERVED15[24];
- __IO uint32_t ADDRESS; /*!< Address used in the TWI transfer */
-} NRF_TWI_Type;
-
-
-/* ================================================================================ */
-/* ================ NFCT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief NFC-A compatible radio (NFCT)
- */
-
-typedef struct { /*!< NFCT Structure */
- __O uint32_t TASKS_ACTIVATE; /*!< Activate NFC peripheral for incoming and outgoing frames, change
- state to activated */
- __O uint32_t TASKS_DISABLE; /*!< Disable NFC peripheral */
- __O uint32_t TASKS_SENSE; /*!< Enable NFC sense field mode, change state to sense mode */
- __O uint32_t TASKS_STARTTX; /*!< Start transmission of a outgoing frame, change state to transmit */
- __I uint32_t RESERVED0[3];
- __O uint32_t TASKS_ENABLERXDATA; /*!< Initializes the EasyDMA for receive. */
- __I uint32_t RESERVED1;
- __O uint32_t TASKS_GOIDLE; /*!< Force state machine to IDLE state */
- __O uint32_t TASKS_GOSLEEP; /*!< Force state machine to SLEEP_A state */
- __I uint32_t RESERVED2[53];
- __IO uint32_t EVENTS_READY; /*!< The NFC peripheral is ready to receive and send frames */
- __IO uint32_t EVENTS_FIELDDETECTED; /*!< Remote NFC field detected */
- __IO uint32_t EVENTS_FIELDLOST; /*!< Remote NFC field lost */
- __IO uint32_t EVENTS_TXFRAMESTART; /*!< Marks the start of the first symbol of a transmitted frame */
- __IO uint32_t EVENTS_TXFRAMEEND; /*!< Marks the end of the last transmitted on-air symbol of a frame */
- __IO uint32_t EVENTS_RXFRAMESTART; /*!< Marks the end of the first symbol of a received frame */
- __IO uint32_t EVENTS_RXFRAMEEND; /*!< Received data have been checked (CRC, parity) and transferred
- to RAM, and EasyDMA has ended accessing the RX buffer */
- __IO uint32_t EVENTS_ERROR; /*!< NFC error reported. The ERRORSTATUS register contains details
- on the source of the error. */
- __I uint32_t RESERVED3[2];
- __IO uint32_t EVENTS_RXERROR; /*!< NFC RX frame error reported. The FRAMESTATUS.RX register contains
- details on the source of the error. */
- __IO uint32_t EVENTS_ENDRX; /*!< RX buffer (as defined by PACKETPTR and MAXLEN) in Data RAM full. */
- __IO uint32_t EVENTS_ENDTX; /*!< Transmission of data in RAM has ended, and EasyDMA has ended
- accessing the TX buffer */
- __I uint32_t RESERVED4;
- __IO uint32_t EVENTS_AUTOCOLRESSTARTED; /*!< Auto collision resolution process has started */
- __I uint32_t RESERVED5[3];
- __IO uint32_t EVENTS_COLLISION; /*!< NFC Auto collision resolution error reported. */
- __IO uint32_t EVENTS_SELECTED; /*!< NFC Auto collision resolution successfully completed */
- __IO uint32_t EVENTS_STARTED; /*!< EasyDMA is ready to receive or send frames. */
- __I uint32_t RESERVED6[43];
- __IO uint32_t SHORTS; /*!< Shortcut register */
- __I uint32_t RESERVED7[63];
- __IO uint32_t INTEN; /*!< Enable or disable interrupt */
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED8[62];
- __IO uint32_t ERRORSTATUS; /*!< NFC Error Status register */
- __I uint32_t RESERVED9;
- NFCT_FRAMESTATUS_Type FRAMESTATUS; /*!< Unspecified */
- __I uint32_t RESERVED10[8];
- __I uint32_t CURRENTLOADCTRL; /*!< Current value driven to the NFC Load Control */
- __I uint32_t RESERVED11[2];
- __I uint32_t FIELDPRESENT; /*!< Indicates the presence or not of a valid field */
- __I uint32_t RESERVED12[49];
- __IO uint32_t FRAMEDELAYMIN; /*!< Minimum frame delay */
- __IO uint32_t FRAMEDELAYMAX; /*!< Maximum frame delay */
- __IO uint32_t FRAMEDELAYMODE; /*!< Configuration register for the Frame Delay Timer */
- __IO uint32_t PACKETPTR; /*!< Packet pointer for TXD and RXD data storage in Data RAM */
- __IO uint32_t MAXLEN; /*!< Size of allocated for TXD and RXD data storage buffer in Data
- RAM */
- NFCT_TXD_Type TXD; /*!< Unspecified */
- NFCT_RXD_Type RXD; /*!< Unspecified */
- __I uint32_t RESERVED13[26];
- __IO uint32_t NFCID1_LAST; /*!< Last NFCID1 part (4, 7 or 10 bytes ID) */
- __IO uint32_t NFCID1_2ND_LAST; /*!< Second last NFCID1 part (7 or 10 bytes ID) */
- __IO uint32_t NFCID1_3RD_LAST; /*!< Third last NFCID1 part (10 bytes ID) */
- __IO uint32_t AUTOCOLRESCONFIG; /*!< Controls the Auto collision resolution function. This setting
- must be done before the NFCT peripheral is enabled. */
- __IO uint32_t SENSRES; /*!< NFC-A SENS_RES auto-response settings */
- __IO uint32_t SELRES; /*!< NFC-A SEL_RES auto-response settings */
-} NRF_NFCT_Type;
-
-
-/* ================================================================================ */
-/* ================ GPIOTE ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief GPIO Tasks and Events (GPIOTE)
- */
-
-typedef struct { /*!< GPIOTE Structure */
- __O uint32_t TASKS_OUT[8]; /*!< Description collection[0]: Task for writing to pin specified
- in CONFIG[0].PSEL. Action on pin is configured in CONFIG[0].POLARITY. */
- __I uint32_t RESERVED0[4];
- __O uint32_t TASKS_SET[8]; /*!< Description collection[0]: Task for writing to pin specified
- in CONFIG[0].PSEL. Action on pin is to set it high. */
- __I uint32_t RESERVED1[4];
- __O uint32_t TASKS_CLR[8]; /*!< Description collection[0]: Task for writing to pin specified
- in CONFIG[0].PSEL. Action on pin is to set it low. */
- __I uint32_t RESERVED2[32];
- __IO uint32_t EVENTS_IN[8]; /*!< Description collection[0]: Event generated from pin specified
- in CONFIG[0].PSEL */
- __I uint32_t RESERVED3[23];
- __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple input GPIO pins with SENSE mechanism
- enabled */
- __I uint32_t RESERVED4[97];
- __IO uint32_t INTENSET; /*!< Enable interrupt */
- __IO uint32_t INTENCLR; /*!< Disable interrupt */
- __I uint32_t RESERVED5[129];
- __IO uint32_t CONFIG[8]; /*!< Description collection[0]: Configuration for OUT[n], SET[n]
- and CLR[n] tasks and IN[n] event */
-} NRF_GPIOTE_Type;
-
-
-/* ================================================================================ */
-/* ================ SAADC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Analog to Digital Converter (SAADC)
- */
-
-typedef struct { /*!< SAADC Structure */
- __O uint32_t TASKS_START; /*!< Start the ADC and prepare the result buffer in RAM */
- __O uint32_t TASKS_SAMPLE; /*!< Take one ADC sample, if scan is enabled all channels are sampled */
- __O uint32_t TASKS_STOP; /*!< Stop the ADC and terminate any on-going conversion */
- __O uint32_t TASKS_CALIBRATEOFFSET; /*!< Starts offset auto-calibration */
- __I uint32_t RESERVED0[60];
- __IO uint32_t EVENTS_STARTED; /*!< The ADC has started */
- __IO uint32_t EVENTS_END; /*!< The ADC has filled up the Result buffer */
- __IO uint32_t EVENTS_DONE;
<TRUNCATED>