You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@tomcat.apache.org by unplug <un...@vulture.no-ip.com> on 2003/08/09 07:14:33 UTC
integration of apache2.0.40 & tomcat4.1.27
Hi all,
I have installed RH9 and it contains apache2.0.40. Then I installed
tomcat4.1.27 by binary. After that I want to integrate them to work
together by using jk2. What is the easy way to integrate them? Any
document that shows step by step integration?
I found jakarta site have a related document about it. But I can't
find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
jakarta site doesn't have mod_jk2-2.0.40 for download.
Rgds,
unplug
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by John Turner <to...@johnturner.com>.
Hmmm...looks like a path problem, but I'm not good enough with make to
really figure it out. The solution is probably pretty easy, though.
John
Mike Millson wrote:
> On Mon, 2003-08-11 at 11:14, John Turner wrote:
>
>>Nice doc.
>>
>>Question:
>>
>>- is there a reason you used the 4.1.24 connectors source, and not the
>>source from http://jakarta.apache.org/builds/jakarta-tomcat-connectors?
>
>
> I initially tried the jakarta-comcat-connectors source and I got an
> error when I ran make. Attached is a file that shows the output that I
> get when I run make and also config.log. So I tried the version-specific
> connector source, and it worked fine.
>
>
>>Also, I see that you had problems with specifying the location of
>>mod_jk.so. You can add this as a parameter to the Listener element in
>>server.xml, which should make RH's Apache installation happy.
>
>
> Thanks, John, I will give this a try.
>
>
>>John
>>
>>Mike Millson wrote:
>>
>>
>>>Here is my documentation on integrating apache + tomcat on RH 9.0. For
>>>admin simplicity, I keep the RedHat apache install.
>>>
>>>http://www.meritonlinesystems.com/docs/
>>>
>>>
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by John Turner <to...@johnturner.com>.
Hmmm...looks like a path problem, but I'm not good enough with make to
really figure it out. The solution is probably pretty easy, though.
John
Mike Millson wrote:
> On Mon, 2003-08-11 at 11:14, John Turner wrote:
>
>>Nice doc.
>>
>>Question:
>>
>>- is there a reason you used the 4.1.24 connectors source, and not the
>>source from http://jakarta.apache.org/builds/jakarta-tomcat-connectors?
>
>
> I initially tried the jakarta-comcat-connectors source and I got an
> error when I ran make. Attached is a file that shows the output that I
> get when I run make and also config.log. So I tried the version-specific
> connector source, and it worked fine.
>
>
>>Also, I see that you had problems with specifying the location of
>>mod_jk.so. You can add this as a parameter to the Listener element in
>>server.xml, which should make RH's Apache installation happy.
>
>
> Thanks, John, I will give this a try.
>
>
>>John
>>
>>Mike Millson wrote:
>>
>>
>>>Here is my documentation on integrating apache + tomcat on RH 9.0. For
>>>admin simplicity, I keep the RedHat apache install.
>>>
>>>http://www.meritonlinesystems.com/docs/
>>>
>>>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by Mike Millson <mm...@meritonlinesystems.com>.
On Mon, 2003-08-11 at 11:14, John Turner wrote:
> Nice doc.
>
> Question:
>
> - is there a reason you used the 4.1.24 connectors source, and not the
> source from http://jakarta.apache.org/builds/jakarta-tomcat-connectors?
I initially tried the jakarta-comcat-connectors source and I got an
error when I ran make. Attached is a file that shows the output that I
get when I run make and also config.log. So I tried the version-specific
connector source, and it worked fine.
>
> Also, I see that you had problems with specifying the location of
> mod_jk.so. You can add this as a parameter to the Listener element in
> server.xml, which should make RH's Apache installation happy.
Thanks, John, I will give this a try.
>
> John
>
> Mike Millson wrote:
>
> > Here is my documentation on integrating apache + tomcat on RH 9.0. For
> > admin simplicity, I keep the RedHat apache install.
> >
> > http://www.meritonlinesystems.com/docs/
> >
> >
> > On Mon, 2003-08-11 at 09:18, John Turner wrote:
> >
> >>unplug wrote:
> >>
> >>
> >>> I have installed RH9 and it contains apache2.0.40. Then I installed
> >>>tomcat4.1.27 by binary. After that I want to integrate them to work
> >>>together by using jk2. What is the easy way to integrate them?
> >>
> >>Use a connector.
> >>
> >>http://jakarta.apache.org/tomcat/faq/connectors.html
> >>
> >>
> >>> Any
> >>>document that shows step by step integration?
> >>
> >>http://jakarta.apache.org/tomcat/faq/connectors.html
> >>
> >>
> >>> I found jakarta site have a related document about it. But I can't
> >>>find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
> >>>mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
> >>>jakarta site doesn't have mod_jk2-2.0.40 for download.
> >>
> >>Because the 2.0.40 included with RH default installations is a munged
> >>Apache distribution.
> >>
> >>In my opinion, you shouldn't use it, and instead should build and
> >>install Apache from source. But that's me.
> >>
> >>If you want to use RH's 2.0.40, you will need to download the connector
> >>source from here:
> >>
> >>http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
> >>
> >>and build your .so file yourself against the 2.0.40 distribution that
> >>you have. You will need to know the location of apxs. Typcially, the
> >>steps for building the .so files from source are:
> >>
> >>1. unpack source
> >>2. find buildconf.sh
> >>3. execute buildconf.sh
> >>4. execute configure like this:
> >>
> >>./configure --with-apxs=/some/path/to/apxs
> >>
> >>5. make
> >>6. make install
> >>
> >>If step #6 doesn't work for you, and step #5 was successful, then do a
> >>"find" for "mod_jk*.so" and when you find it, copy it to your Apache
> >>modules directory.
> >>
> >>John
> >>
> >>
> >>
> >>
> >>
> >>---------------------------------------------------------------------
> >>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> >>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by John Turner <to...@johnturner.com>.
Nice doc.
Question:
- is there a reason you used the 4.1.24 connectors source, and not the
source from http://jakarta.apache.org/builds/jakarta-tomcat-connectors?
Also, I see that you had problems with specifying the location of
mod_jk.so. You can add this as a parameter to the Listener element in
server.xml, which should make RH's Apache installation happy.
John
Mike Millson wrote:
> Here is my documentation on integrating apache + tomcat on RH 9.0. For
> admin simplicity, I keep the RedHat apache install.
>
> http://www.meritonlinesystems.com/docs/
>
>
> On Mon, 2003-08-11 at 09:18, John Turner wrote:
>
>>unplug wrote:
>>
>>
>>> I have installed RH9 and it contains apache2.0.40. Then I installed
>>>tomcat4.1.27 by binary. After that I want to integrate them to work
>>>together by using jk2. What is the easy way to integrate them?
>>
>>Use a connector.
>>
>>http://jakarta.apache.org/tomcat/faq/connectors.html
>>
>>
>>> Any
>>>document that shows step by step integration?
>>
>>http://jakarta.apache.org/tomcat/faq/connectors.html
>>
>>
>>> I found jakarta site have a related document about it. But I can't
>>>find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
>>>mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
>>>jakarta site doesn't have mod_jk2-2.0.40 for download.
>>
>>Because the 2.0.40 included with RH default installations is a munged
>>Apache distribution.
>>
>>In my opinion, you shouldn't use it, and instead should build and
>>install Apache from source. But that's me.
>>
>>If you want to use RH's 2.0.40, you will need to download the connector
>>source from here:
>>
>>http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
>>
>>and build your .so file yourself against the 2.0.40 distribution that
>>you have. You will need to know the location of apxs. Typcially, the
>>steps for building the .so files from source are:
>>
>>1. unpack source
>>2. find buildconf.sh
>>3. execute buildconf.sh
>>4. execute configure like this:
>>
>>./configure --with-apxs=/some/path/to/apxs
>>
>>5. make
>>6. make install
>>
>>If step #6 doesn't work for you, and step #5 was successful, then do a
>>"find" for "mod_jk*.so" and when you find it, copy it to your Apache
>>modules directory.
>>
>>John
>>
>>
>>
>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by Mike Millson <mm...@meritonlinesystems.com>.
Thanks again John. I didn't know that tomcat saves sessions across
restarts. This explains some behavior I've seen in the past!
Mike
On Mon, 2003-08-11 at 11:15, John Turner wrote:
> Also, a suggestion:
>
> - add a cleanout of the work directory on restarts or stops.
>
> John
>
> Mike Millson wrote:
>
> > Here is my documentation on integrating apache + tomcat on RH 9.0. For
> > admin simplicity, I keep the RedHat apache install.
> >
> > http://www.meritonlinesystems.com/docs/
> >
> >
> > On Mon, 2003-08-11 at 09:18, John Turner wrote:
> >
> >>unplug wrote:
> >>
> >>
> >>> I have installed RH9 and it contains apache2.0.40. Then I installed
> >>>tomcat4.1.27 by binary. After that I want to integrate them to work
> >>>together by using jk2. What is the easy way to integrate them?
> >>
> >>Use a connector.
> >>
> >>http://jakarta.apache.org/tomcat/faq/connectors.html
> >>
> >>
> >>> Any
> >>>document that shows step by step integration?
> >>
> >>http://jakarta.apache.org/tomcat/faq/connectors.html
> >>
> >>
> >>> I found jakarta site have a related document about it. But I can't
> >>>find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
> >>>mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
> >>>jakarta site doesn't have mod_jk2-2.0.40 for download.
> >>
> >>Because the 2.0.40 included with RH default installations is a munged
> >>Apache distribution.
> >>
> >>In my opinion, you shouldn't use it, and instead should build and
> >>install Apache from source. But that's me.
> >>
> >>If you want to use RH's 2.0.40, you will need to download the connector
> >>source from here:
> >>
> >>http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
> >>
> >>and build your .so file yourself against the 2.0.40 distribution that
> >>you have. You will need to know the location of apxs. Typcially, the
> >>steps for building the .so files from source are:
> >>
> >>1. unpack source
> >>2. find buildconf.sh
> >>3. execute buildconf.sh
> >>4. execute configure like this:
> >>
> >>./configure --with-apxs=/some/path/to/apxs
> >>
> >>5. make
> >>6. make install
> >>
> >>If step #6 doesn't work for you, and step #5 was successful, then do a
> >>"find" for "mod_jk*.so" and when you find it, copy it to your Apache
> >>modules directory.
> >>
> >>John
> >>
> >>
> >>
> >>
> >>
> >>---------------------------------------------------------------------
> >>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> >>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by Mike Millson <mm...@meritonlinesystems.com>.
Thanks again John. I didn't know that tomcat saves sessions across
restarts. This explains some behavior I've seen in the past!
Mike
On Mon, 2003-08-11 at 11:15, John Turner wrote:
> Also, a suggestion:
>
> - add a cleanout of the work directory on restarts or stops.
>
> John
>
> Mike Millson wrote:
>
> > Here is my documentation on integrating apache + tomcat on RH 9.0. For
> > admin simplicity, I keep the RedHat apache install.
> >
> > http://www.meritonlinesystems.com/docs/
> >
> >
> > On Mon, 2003-08-11 at 09:18, John Turner wrote:
> >
> >>unplug wrote:
> >>
> >>
> >>> I have installed RH9 and it contains apache2.0.40. Then I installed
> >>>tomcat4.1.27 by binary. After that I want to integrate them to work
> >>>together by using jk2. What is the easy way to integrate them?
> >>
> >>Use a connector.
> >>
> >>http://jakarta.apache.org/tomcat/faq/connectors.html
> >>
> >>
> >>> Any
> >>>document that shows step by step integration?
> >>
> >>http://jakarta.apache.org/tomcat/faq/connectors.html
> >>
> >>
> >>> I found jakarta site have a related document about it. But I can't
> >>>find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
> >>>mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
> >>>jakarta site doesn't have mod_jk2-2.0.40 for download.
> >>
> >>Because the 2.0.40 included with RH default installations is a munged
> >>Apache distribution.
> >>
> >>In my opinion, you shouldn't use it, and instead should build and
> >>install Apache from source. But that's me.
> >>
> >>If you want to use RH's 2.0.40, you will need to download the connector
> >>source from here:
> >>
> >>http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
> >>
> >>and build your .so file yourself against the 2.0.40 distribution that
> >>you have. You will need to know the location of apxs. Typcially, the
> >>steps for building the .so files from source are:
> >>
> >>1. unpack source
> >>2. find buildconf.sh
> >>3. execute buildconf.sh
> >>4. execute configure like this:
> >>
> >>./configure --with-apxs=/some/path/to/apxs
> >>
> >>5. make
> >>6. make install
> >>
> >>If step #6 doesn't work for you, and step #5 was successful, then do a
> >>"find" for "mod_jk*.so" and when you find it, copy it to your Apache
> >>modules directory.
> >>
> >>John
> >>
> >>
> >>
> >>
> >>
> >>---------------------------------------------------------------------
> >>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> >>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by John Turner <to...@johnturner.com>.
Also, a suggestion:
- add a cleanout of the work directory on restarts or stops.
John
Mike Millson wrote:
> Here is my documentation on integrating apache + tomcat on RH 9.0. For
> admin simplicity, I keep the RedHat apache install.
>
> http://www.meritonlinesystems.com/docs/
>
>
> On Mon, 2003-08-11 at 09:18, John Turner wrote:
>
>>unplug wrote:
>>
>>
>>> I have installed RH9 and it contains apache2.0.40. Then I installed
>>>tomcat4.1.27 by binary. After that I want to integrate them to work
>>>together by using jk2. What is the easy way to integrate them?
>>
>>Use a connector.
>>
>>http://jakarta.apache.org/tomcat/faq/connectors.html
>>
>>
>>> Any
>>>document that shows step by step integration?
>>
>>http://jakarta.apache.org/tomcat/faq/connectors.html
>>
>>
>>> I found jakarta site have a related document about it. But I can't
>>>find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
>>>mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
>>>jakarta site doesn't have mod_jk2-2.0.40 for download.
>>
>>Because the 2.0.40 included with RH default installations is a munged
>>Apache distribution.
>>
>>In my opinion, you shouldn't use it, and instead should build and
>>install Apache from source. But that's me.
>>
>>If you want to use RH's 2.0.40, you will need to download the connector
>>source from here:
>>
>>http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
>>
>>and build your .so file yourself against the 2.0.40 distribution that
>>you have. You will need to know the location of apxs. Typcially, the
>>steps for building the .so files from source are:
>>
>>1. unpack source
>>2. find buildconf.sh
>>3. execute buildconf.sh
>>4. execute configure like this:
>>
>>./configure --with-apxs=/some/path/to/apxs
>>
>>5. make
>>6. make install
>>
>>If step #6 doesn't work for you, and step #5 was successful, then do a
>>"find" for "mod_jk*.so" and when you find it, copy it to your Apache
>>modules directory.
>>
>>John
>>
>>
>>
>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by John Turner <to...@johnturner.com>.
Nice doc.
Question:
- is there a reason you used the 4.1.24 connectors source, and not the
source from http://jakarta.apache.org/builds/jakarta-tomcat-connectors?
Also, I see that you had problems with specifying the location of
mod_jk.so. You can add this as a parameter to the Listener element in
server.xml, which should make RH's Apache installation happy.
John
Mike Millson wrote:
> Here is my documentation on integrating apache + tomcat on RH 9.0. For
> admin simplicity, I keep the RedHat apache install.
>
> http://www.meritonlinesystems.com/docs/
>
>
> On Mon, 2003-08-11 at 09:18, John Turner wrote:
>
>>unplug wrote:
>>
>>
>>> I have installed RH9 and it contains apache2.0.40. Then I installed
>>>tomcat4.1.27 by binary. After that I want to integrate them to work
>>>together by using jk2. What is the easy way to integrate them?
>>
>>Use a connector.
>>
>>http://jakarta.apache.org/tomcat/faq/connectors.html
>>
>>
>>> Any
>>>document that shows step by step integration?
>>
>>http://jakarta.apache.org/tomcat/faq/connectors.html
>>
>>
>>> I found jakarta site have a related document about it. But I can't
>>>find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
>>>mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
>>>jakarta site doesn't have mod_jk2-2.0.40 for download.
>>
>>Because the 2.0.40 included with RH default installations is a munged
>>Apache distribution.
>>
>>In my opinion, you shouldn't use it, and instead should build and
>>install Apache from source. But that's me.
>>
>>If you want to use RH's 2.0.40, you will need to download the connector
>>source from here:
>>
>>http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
>>
>>and build your .so file yourself against the 2.0.40 distribution that
>>you have. You will need to know the location of apxs. Typcially, the
>>steps for building the .so files from source are:
>>
>>1. unpack source
>>2. find buildconf.sh
>>3. execute buildconf.sh
>>4. execute configure like this:
>>
>>./configure --with-apxs=/some/path/to/apxs
>>
>>5. make
>>6. make install
>>
>>If step #6 doesn't work for you, and step #5 was successful, then do a
>>"find" for "mod_jk*.so" and when you find it, copy it to your Apache
>>modules directory.
>>
>>John
>>
>>
>>
>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by John Turner <to...@johnturner.com>.
Also, a suggestion:
- add a cleanout of the work directory on restarts or stops.
John
Mike Millson wrote:
> Here is my documentation on integrating apache + tomcat on RH 9.0. For
> admin simplicity, I keep the RedHat apache install.
>
> http://www.meritonlinesystems.com/docs/
>
>
> On Mon, 2003-08-11 at 09:18, John Turner wrote:
>
>>unplug wrote:
>>
>>
>>> I have installed RH9 and it contains apache2.0.40. Then I installed
>>>tomcat4.1.27 by binary. After that I want to integrate them to work
>>>together by using jk2. What is the easy way to integrate them?
>>
>>Use a connector.
>>
>>http://jakarta.apache.org/tomcat/faq/connectors.html
>>
>>
>>> Any
>>>document that shows step by step integration?
>>
>>http://jakarta.apache.org/tomcat/faq/connectors.html
>>
>>
>>> I found jakarta site have a related document about it. But I can't
>>>find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
>>>mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
>>>jakarta site doesn't have mod_jk2-2.0.40 for download.
>>
>>Because the 2.0.40 included with RH default installations is a munged
>>Apache distribution.
>>
>>In my opinion, you shouldn't use it, and instead should build and
>>install Apache from source. But that's me.
>>
>>If you want to use RH's 2.0.40, you will need to download the connector
>>source from here:
>>
>>http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
>>
>>and build your .so file yourself against the 2.0.40 distribution that
>>you have. You will need to know the location of apxs. Typcially, the
>>steps for building the .so files from source are:
>>
>>1. unpack source
>>2. find buildconf.sh
>>3. execute buildconf.sh
>>4. execute configure like this:
>>
>>./configure --with-apxs=/some/path/to/apxs
>>
>>5. make
>>6. make install
>>
>>If step #6 doesn't work for you, and step #5 was successful, then do a
>>"find" for "mod_jk*.so" and when you find it, copy it to your Apache
>>modules directory.
>>
>>John
>>
>>
>>
>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
>>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by Mike Millson <mm...@meritonlinesystems.com>.
Here is my documentation on integrating apache + tomcat on RH 9.0. For
admin simplicity, I keep the RedHat apache install.
http://www.meritonlinesystems.com/docs/
On Mon, 2003-08-11 at 09:18, John Turner wrote:
> unplug wrote:
>
> > I have installed RH9 and it contains apache2.0.40. Then I installed
> > tomcat4.1.27 by binary. After that I want to integrate them to work
> > together by using jk2. What is the easy way to integrate them?
>
> Use a connector.
>
> http://jakarta.apache.org/tomcat/faq/connectors.html
>
> > Any
> > document that shows step by step integration?
>
> http://jakarta.apache.org/tomcat/faq/connectors.html
>
> > I found jakarta site have a related document about it. But I can't
> > find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
> > mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
> > jakarta site doesn't have mod_jk2-2.0.40 for download.
>
> Because the 2.0.40 included with RH default installations is a munged
> Apache distribution.
>
> In my opinion, you shouldn't use it, and instead should build and
> install Apache from source. But that's me.
>
> If you want to use RH's 2.0.40, you will need to download the connector
> source from here:
>
> http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
>
> and build your .so file yourself against the 2.0.40 distribution that
> you have. You will need to know the location of apxs. Typcially, the
> steps for building the .so files from source are:
>
> 1. unpack source
> 2. find buildconf.sh
> 3. execute buildconf.sh
> 4. execute configure like this:
>
> ./configure --with-apxs=/some/path/to/apxs
>
> 5. make
> 6. make install
>
> If step #6 doesn't work for you, and step #5 was successful, then do a
> "find" for "mod_jk*.so" and when you find it, copy it to your Apache
> modules directory.
>
> John
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by Mike Millson <mm...@meritonlinesystems.com>.
Here is my documentation on integrating apache + tomcat on RH 9.0. For
admin simplicity, I keep the RedHat apache install.
http://www.meritonlinesystems.com/docs/
On Mon, 2003-08-11 at 09:18, John Turner wrote:
> unplug wrote:
>
> > I have installed RH9 and it contains apache2.0.40. Then I installed
> > tomcat4.1.27 by binary. After that I want to integrate them to work
> > together by using jk2. What is the easy way to integrate them?
>
> Use a connector.
>
> http://jakarta.apache.org/tomcat/faq/connectors.html
>
> > Any
> > document that shows step by step integration?
>
> http://jakarta.apache.org/tomcat/faq/connectors.html
>
> > I found jakarta site have a related document about it. But I can't
> > find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
> > mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
> > jakarta site doesn't have mod_jk2-2.0.40 for download.
>
> Because the 2.0.40 included with RH default installations is a munged
> Apache distribution.
>
> In my opinion, you shouldn't use it, and instead should build and
> install Apache from source. But that's me.
>
> If you want to use RH's 2.0.40, you will need to download the connector
> source from here:
>
> http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
>
> and build your .so file yourself against the 2.0.40 distribution that
> you have. You will need to know the location of apxs. Typcially, the
> steps for building the .so files from source are:
>
> 1. unpack source
> 2. find buildconf.sh
> 3. execute buildconf.sh
> 4. execute configure like this:
>
> ./configure --with-apxs=/some/path/to/apxs
>
> 5. make
> 6. make install
>
> If step #6 doesn't work for you, and step #5 was successful, then do a
> "find" for "mod_jk*.so" and when you find it, copy it to your Apache
> modules directory.
>
> John
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by John Turner <to...@johnturner.com>.
unplug wrote:
> I have installed RH9 and it contains apache2.0.40. Then I installed
> tomcat4.1.27 by binary. After that I want to integrate them to work
> together by using jk2. What is the easy way to integrate them?
Use a connector.
http://jakarta.apache.org/tomcat/faq/connectors.html
> Any
> document that shows step by step integration?
http://jakarta.apache.org/tomcat/faq/connectors.html
> I found jakarta site have a related document about it. But I can't
> find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
> mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
> jakarta site doesn't have mod_jk2-2.0.40 for download.
Because the 2.0.40 included with RH default installations is a munged
Apache distribution.
In my opinion, you shouldn't use it, and instead should build and
install Apache from source. But that's me.
If you want to use RH's 2.0.40, you will need to download the connector
source from here:
http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
and build your .so file yourself against the 2.0.40 distribution that
you have. You will need to know the location of apxs. Typcially, the
steps for building the .so files from source are:
1. unpack source
2. find buildconf.sh
3. execute buildconf.sh
4. execute configure like this:
./configure --with-apxs=/some/path/to/apxs
5. make
6. make install
If step #6 doesn't work for you, and step #5 was successful, then do a
"find" for "mod_jk*.so" and when you find it, copy it to your Apache
modules directory.
John
Re: integration of apache2.0.40 & tomcat4.1.27
Posted by John Turner <to...@johnturner.com>.
unplug wrote:
> I have installed RH9 and it contains apache2.0.40. Then I installed
> tomcat4.1.27 by binary. After that I want to integrate them to work
> together by using jk2. What is the easy way to integrate them?
Use a connector.
http://jakarta.apache.org/tomcat/faq/connectors.html
> Any
> document that shows step by step integration?
http://jakarta.apache.org/tomcat/faq/connectors.html
> I found jakarta site have a related document about it. But I can't
> find the bin mod_jk2 for 2.0.40 in jakarta site. Where can I find
> mod_jk2 for 2.0.40? Any guide line to build it myself? I wonder why
> jakarta site doesn't have mod_jk2-2.0.40 for download.
Because the 2.0.40 included with RH default installations is a munged
Apache distribution.
In my opinion, you shouldn't use it, and instead should build and
install Apache from source. But that's me.
If you want to use RH's 2.0.40, you will need to download the connector
source from here:
http://jakarta.apache.org/builds/jakarta-tomcat-connectors/
and build your .so file yourself against the 2.0.40 distribution that
you have. You will need to know the location of apxs. Typcially, the
steps for building the .so files from source are:
1. unpack source
2. find buildconf.sh
3. execute buildconf.sh
4. execute configure like this:
./configure --with-apxs=/some/path/to/apxs
5. make
6. make install
If step #6 doesn't work for you, and step #5 was successful, then do a
"find" for "mod_jk*.so" and when you find it, copy it to your Apache
modules directory.
John
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org