You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@yunikorn.apache.org by Peter Bacsko <ba...@gmail.com> on 2022/08/31 10:03:09 UTC

[VOTE] Release Apache YuniKorn 1.1.0 RC1

Hello everyone,

I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.

The release artifacts have been uploaded here:
  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/

My public key is located here:
  https://downloads.apache.org/yunikorn/KEYS

JIRA issues that have been resolved in this release:
  https://issues.apache.org/jira/issues/?filter=12352202

Git tags for each component are as follows:

incubator-yunikorn-scheduler-interface: v1.1.0-1
incubator-yunikorn-core: v1.1.0-1
incubator-yunikorn-k8shim: v1.1.0-1
incubator-yunikorn-web: v1.1.0-1
incubator-yunikorn-release: v1.1.0-1

One the release is voted on and approved, all repos will be tagged 1.1.0
for consistency.

Please review and vote. The vote will be open for at least 72 hours and
closes on Saturday, September 3 2022, 12pm CEST.

[ ] +1 Approve
[ ] +0 No opinion
[ ] -1 Disapprove (and the reason why)


Thank you,
Peter

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Peter Bacsko <ba...@gmail.com>.
Correction: obviously, there's no more "incubator".
That was a mistake from a copy-paste.

yunikorn-scheduler-interface: v1.1.0-1
yunikorn-core: v1.1.0-1
yunikorn-k8shim: v1.1.0-1
yunikorn-web: v1.1.0-1
yunikorn-release: v1.1.0-1

On Wed, Aug 31, 2022 at 12:03 PM Peter Bacsko <ba...@gmail.com> wrote:

> Hello everyone,
>
> I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
>
> The release artifacts have been uploaded here:
>   https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
>
> My public key is located here:
>   https://downloads.apache.org/yunikorn/KEYS
>
> JIRA issues that have been resolved in this release:
>   https://issues.apache.org/jira/issues/?filter=12352202
>
> Git tags for each component are as follows:
>
> incubator-yunikorn-scheduler-interface: v1.1.0-1
> incubator-yunikorn-core: v1.1.0-1
> incubator-yunikorn-k8shim: v1.1.0-1
> incubator-yunikorn-web: v1.1.0-1
> incubator-yunikorn-release: v1.1.0-1
>
> One the release is voted on and approved, all repos will be tagged 1.1.0
> for consistency.
>
> Please review and vote. The vote will be open for at least 72 hours and
> closes on Saturday, September 3 2022, 12pm CEST.
>
> [ ] +1 Approve
> [ ] +0 No opinion
> [ ] -1 Disapprove (and the reason why)
>
>
> Thank you,
> Peter
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Weiwei Yang <ww...@apache.org>.
+1 (binding)

 - built the docker images from source on M1 mac
 - installed yunikorn locally with the released helm charts
 - run simple workloads to verify the scheduler works fine
 - verified the web UI pages, home / apps / queues / nodes, look good
 - verified the queue utilization bar is working properly

Peter, thanks for helping the release,  now you have 6 binding +1 votes : )

Weiwei


On Tue, Sep 6, 2022 at 6:40 AM Peter Bacsko <ba...@gmail.com> wrote:

> +1 (binding) from me
>
> - built images from source
> - ran unit tests
> - ran validate_cluster.sh to install the release on KIND
> - checked REST endpoints
> - checked UI
>
> Thank you all for the voting on the RC1 for 1.1.0.
>
> That concludes the voting: it has passed with 5 binding +1, 0 non binding
> +1, no 0 or -1 votes.
>
> After publishing the artifacts and finishing the release process, I'll send
> out an announcement email.
>
> Thank you,
> Peter
>
> On Tue, Sep 6, 2022 at 3:12 PM TingYao <ti...@apache.org> wrote:
>
> > +1
> >
> > - build images(ubuntu/amd64)
> > - run unit test
> > - deploy Yunikorn to kubernetes cluster
> >
> > Thanks Peter
> >
> > Tingyao
> >
> > Peter Bacsko <ba...@gmail.com> 於 2022年9月5日 週一 下午4:20寫道:
> >
> > > Thanks for the votes so far.
> > >
> > > Some folks are still out, so I'm extending the voting deadline until
> > > September 7, 2020 12:00pm CEST.
> > >
> > > Thanks,
> > > Peter
> > >
> > > On Sat, Sep 3, 2022 at 5:05 PM 陳Chen宥騰Yuteng <a0...@gmail.com>
> wrote:
> > >
> > > > +1
> > > > - Built ARM based image(arm64v8)
> > > > - Ran unit tests
> > > > - Deployed Yunikorn on Kubernetes cluster.
> > > > - Tried the sleep example. Pods could be scheduled by Yunikorn.
> > > >
> > > > Wilfred Spiegelenburg <wi...@apache.org> 於 2022年9月2日 週五
> 上午10:35寫道:
> > > >
> > > > > +1 (binding)
> > > > >
> > > > > - Verified signatures
> > > > > - Verified sha512 sum
> > > > > - Verified the LICENSE changes
> > > > > - Built ARM based image on Mac/amd64
> > > > > - Ran validation script to verify proper startup
> > > > > - Ran unit tests
> > > > >
> > > > > Filed YUNIKORN-1305 to fix the sha labeling in the generated image
> > but
> > > > that
> > > > > is not important enough to stop the release.
> > > > >
> > > > > Wilfred
> > > > >
> > > > > On Fri, 2 Sept 2022 at 03:23, Craig Condit <cr...@craigcondit.com>
> > > > wrote:
> > > > >
> > > > > > +1.
> > > > > >
> > > > > > - Verified signatures
> > > > > > - Verified sha512 sum
> > > > > > - Built release (on Mac/amd64)
> > > > > > - Ran validation script to verify proper startup
> > > > > > - Executed e2e tests on both standard and plugin mode
> > > > > >
> > > > > > Other than a couple of flaky tests (known issue) everything looks
> > > > great.
> > > > > >
> > > > > > Thanks Peter for the release work!
> > > > > >
> > > > > >
> > > > > > Craig
> > > > > >
> > > > > >
> > > > > >
> > > > > > > On Sep 1, 2022, at 7:03 AM, Peter Bacsko <ba...@gmail.com>
> > > wrote:
> > > > > > >
> > > > > > > Thanks Craig.
> > > > > > >
> > > > > > > I re-generated the artifacts with just using "1.1.0" in
> > > > > > > release-configs.json.
> > > > > > >
> > > > > > > It's based the same code base/tags, so it's still the RC1.
> > > > > > >
> > > > > > > I removed the previous artifacts and the new ones are available
> > > here:
> > > > > > >  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Peter
> > > > > > >
> > > > > > > On Wed, Aug 31, 2022 at 11:34 PM Wilfred Spiegelenburg <
> > > > > > wilfreds@apache.org>
> > > > > > > wrote:
> > > > > > >
> > > > > > >> The version that is used in the name is also in the
> > substitutions
> > > in
> > > > > the
> > > > > > >> Makefile, helm charts etc.
> > > > > > >>
> > > > > > >> Updating the release-configs.json should be clarified in:
> > > > > > >> * update the version with the release version: examples:
> 0.12.2
> > or
> > > > > 1.1.0
> > > > > > >> * update the tags with the current release tag examples:
> > 0.12.2-1
> > > or
> > > > > > >> 1.0.0-1
> > > > > > >>
> > > > > > >> We need to re-run the release tool with the update in the
> > version.
> > > > > > >>
> > > > > > >> Wilfred
> > > > > > >>
> > > > > > >> On Thu, 1 Sept 2022 at 00:17, Craig Condit <
> ccondit@apache.org>
> > > > > wrote:
> > > > > > >>
> > > > > > >>> Unfortunately, I have to vote -1 on this.
> > > > > > >>>
> > > > > > >>> Release candidates, if they are to become actual releases,
> must
> > > be
> > > > > > binary
> > > > > > >>> identical once voted upon and released. This archive contains
> > > > > numerous
> > > > > > >>> references to “RC1” including the top-level directory within
> > the
> > > > > > archive
> > > > > > >>> itself. All of these will at a minimum change the sha512sum
> of
> > > the
> > > > > > >> archive,
> > > > > > >>> and logically result in different contents.
> > > > > > >>>
> > > > > > >>> However, I don’t see an issue with the source code, so simply
> > > > > > >> re-releasing
> > > > > > >>> the tarball without ‘-RC1’ in the version will probably work.
> > > > > > >>>
> > > > > > >>>
> > > > > > >>> Craig
> > > > > > >>>
> > > > > > >>>
> > > > > > >>>
> > > > > > >>>> On Aug 31, 2022, at 5:03 AM, Peter Bacsko <
> bacskop@gmail.com>
> > > > > wrote:
> > > > > > >>>>
> > > > > > >>>> Hello everyone,
> > > > > > >>>>
> > > > > > >>>> I’d like to call a vote for releasing Apache YuniKorn 1.1.0
> > RC1.
> > > > > > >>>>
> > > > > > >>>> The release artifacts have been uploaded here:
> > > > > > >>>> https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > > > > > >>>>
> > > > > > >>>> My public key is located here:
> > > > > > >>>> https://downloads.apache.org/yunikorn/KEYS
> > > > > > >>>>
> > > > > > >>>> JIRA issues that have been resolved in this release:
> > > > > > >>>> https://issues.apache.org/jira/issues/?filter=12352202
> > > > > > >>>>
> > > > > > >>>> Git tags for each component are as follows:
> > > > > > >>>>
> > > > > > >>>> incubator-yunikorn-scheduler-interface: v1.1.0-1
> > > > > > >>>> incubator-yunikorn-core: v1.1.0-1
> > > > > > >>>> incubator-yunikorn-k8shim: v1.1.0-1
> > > > > > >>>> incubator-yunikorn-web: v1.1.0-1
> > > > > > >>>> incubator-yunikorn-release: v1.1.0-1
> > > > > > >>>>
> > > > > > >>>> One the release is voted on and approved, all repos will be
> > > tagged
> > > > > > >> 1.1.0
> > > > > > >>>> for consistency.
> > > > > > >>>>
> > > > > > >>>> Please review and vote. The vote will be open for at least
> 72
> > > > hours
> > > > > > and
> > > > > > >>>> closes on Saturday, September 3 2022, 12pm CEST.
> > > > > > >>>>
> > > > > > >>>> [ ] +1 Approve
> > > > > > >>>> [ ] +0 No opinion
> > > > > > >>>> [ ] -1 Disapprove (and the reason why)
> > > > > > >>>>
> > > > > > >>>>
> > > > > > >>>> Thank you,
> > > > > > >>>> Peter
> > > > > > >>>
> > > > > > >>>
> > > > > > >>>
> > > > ---------------------------------------------------------------------
> > > > > > >>> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > > > > > >>> For additional commands, e-mail:
> dev-help@yunikorn.apache.org
> > > > > > >>>
> > > > > > >>>
> > > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > ---------------------------------------------------------------------
> > > > > > To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > > > > > For additional commands, e-mail: dev-help@yunikorn.apache.org
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Peter Bacsko <ba...@gmail.com>.
+1 (binding) from me

- built images from source
- ran unit tests
- ran validate_cluster.sh to install the release on KIND
- checked REST endpoints
- checked UI

Thank you all for the voting on the RC1 for 1.1.0.

That concludes the voting: it has passed with 5 binding +1, 0 non binding
+1, no 0 or -1 votes.

After publishing the artifacts and finishing the release process, I'll send
out an announcement email.

Thank you,
Peter

On Tue, Sep 6, 2022 at 3:12 PM TingYao <ti...@apache.org> wrote:

> +1
>
> - build images(ubuntu/amd64)
> - run unit test
> - deploy Yunikorn to kubernetes cluster
>
> Thanks Peter
>
> Tingyao
>
> Peter Bacsko <ba...@gmail.com> 於 2022年9月5日 週一 下午4:20寫道:
>
> > Thanks for the votes so far.
> >
> > Some folks are still out, so I'm extending the voting deadline until
> > September 7, 2020 12:00pm CEST.
> >
> > Thanks,
> > Peter
> >
> > On Sat, Sep 3, 2022 at 5:05 PM 陳Chen宥騰Yuteng <a0...@gmail.com> wrote:
> >
> > > +1
> > > - Built ARM based image(arm64v8)
> > > - Ran unit tests
> > > - Deployed Yunikorn on Kubernetes cluster.
> > > - Tried the sleep example. Pods could be scheduled by Yunikorn.
> > >
> > > Wilfred Spiegelenburg <wi...@apache.org> 於 2022年9月2日 週五 上午10:35寫道:
> > >
> > > > +1 (binding)
> > > >
> > > > - Verified signatures
> > > > - Verified sha512 sum
> > > > - Verified the LICENSE changes
> > > > - Built ARM based image on Mac/amd64
> > > > - Ran validation script to verify proper startup
> > > > - Ran unit tests
> > > >
> > > > Filed YUNIKORN-1305 to fix the sha labeling in the generated image
> but
> > > that
> > > > is not important enough to stop the release.
> > > >
> > > > Wilfred
> > > >
> > > > On Fri, 2 Sept 2022 at 03:23, Craig Condit <cr...@craigcondit.com>
> > > wrote:
> > > >
> > > > > +1.
> > > > >
> > > > > - Verified signatures
> > > > > - Verified sha512 sum
> > > > > - Built release (on Mac/amd64)
> > > > > - Ran validation script to verify proper startup
> > > > > - Executed e2e tests on both standard and plugin mode
> > > > >
> > > > > Other than a couple of flaky tests (known issue) everything looks
> > > great.
> > > > >
> > > > > Thanks Peter for the release work!
> > > > >
> > > > >
> > > > > Craig
> > > > >
> > > > >
> > > > >
> > > > > > On Sep 1, 2022, at 7:03 AM, Peter Bacsko <ba...@gmail.com>
> > wrote:
> > > > > >
> > > > > > Thanks Craig.
> > > > > >
> > > > > > I re-generated the artifacts with just using "1.1.0" in
> > > > > > release-configs.json.
> > > > > >
> > > > > > It's based the same code base/tags, so it's still the RC1.
> > > > > >
> > > > > > I removed the previous artifacts and the new ones are available
> > here:
> > > > > >  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > > > > >
> > > > > > Thanks,
> > > > > > Peter
> > > > > >
> > > > > > On Wed, Aug 31, 2022 at 11:34 PM Wilfred Spiegelenburg <
> > > > > wilfreds@apache.org>
> > > > > > wrote:
> > > > > >
> > > > > >> The version that is used in the name is also in the
> substitutions
> > in
> > > > the
> > > > > >> Makefile, helm charts etc.
> > > > > >>
> > > > > >> Updating the release-configs.json should be clarified in:
> > > > > >> * update the version with the release version: examples: 0.12.2
> or
> > > > 1.1.0
> > > > > >> * update the tags with the current release tag examples:
> 0.12.2-1
> > or
> > > > > >> 1.0.0-1
> > > > > >>
> > > > > >> We need to re-run the release tool with the update in the
> version.
> > > > > >>
> > > > > >> Wilfred
> > > > > >>
> > > > > >> On Thu, 1 Sept 2022 at 00:17, Craig Condit <cc...@apache.org>
> > > > wrote:
> > > > > >>
> > > > > >>> Unfortunately, I have to vote -1 on this.
> > > > > >>>
> > > > > >>> Release candidates, if they are to become actual releases, must
> > be
> > > > > binary
> > > > > >>> identical once voted upon and released. This archive contains
> > > > numerous
> > > > > >>> references to “RC1” including the top-level directory within
> the
> > > > > archive
> > > > > >>> itself. All of these will at a minimum change the sha512sum of
> > the
> > > > > >> archive,
> > > > > >>> and logically result in different contents.
> > > > > >>>
> > > > > >>> However, I don’t see an issue with the source code, so simply
> > > > > >> re-releasing
> > > > > >>> the tarball without ‘-RC1’ in the version will probably work.
> > > > > >>>
> > > > > >>>
> > > > > >>> Craig
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>>> On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com>
> > > > wrote:
> > > > > >>>>
> > > > > >>>> Hello everyone,
> > > > > >>>>
> > > > > >>>> I’d like to call a vote for releasing Apache YuniKorn 1.1.0
> RC1.
> > > > > >>>>
> > > > > >>>> The release artifacts have been uploaded here:
> > > > > >>>> https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > > > > >>>>
> > > > > >>>> My public key is located here:
> > > > > >>>> https://downloads.apache.org/yunikorn/KEYS
> > > > > >>>>
> > > > > >>>> JIRA issues that have been resolved in this release:
> > > > > >>>> https://issues.apache.org/jira/issues/?filter=12352202
> > > > > >>>>
> > > > > >>>> Git tags for each component are as follows:
> > > > > >>>>
> > > > > >>>> incubator-yunikorn-scheduler-interface: v1.1.0-1
> > > > > >>>> incubator-yunikorn-core: v1.1.0-1
> > > > > >>>> incubator-yunikorn-k8shim: v1.1.0-1
> > > > > >>>> incubator-yunikorn-web: v1.1.0-1
> > > > > >>>> incubator-yunikorn-release: v1.1.0-1
> > > > > >>>>
> > > > > >>>> One the release is voted on and approved, all repos will be
> > tagged
> > > > > >> 1.1.0
> > > > > >>>> for consistency.
> > > > > >>>>
> > > > > >>>> Please review and vote. The vote will be open for at least 72
> > > hours
> > > > > and
> > > > > >>>> closes on Saturday, September 3 2022, 12pm CEST.
> > > > > >>>>
> > > > > >>>> [ ] +1 Approve
> > > > > >>>> [ ] +0 No opinion
> > > > > >>>> [ ] -1 Disapprove (and the reason why)
> > > > > >>>>
> > > > > >>>>
> > > > > >>>> Thank you,
> > > > > >>>> Peter
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > ---------------------------------------------------------------------
> > > > > >>> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > > > > >>> For additional commands, e-mail: dev-help@yunikorn.apache.org
> > > > > >>>
> > > > > >>>
> > > > > >>
> > > > >
> > > > >
> > > > >
> ---------------------------------------------------------------------
> > > > > To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > > > > For additional commands, e-mail: dev-help@yunikorn.apache.org
> > > > >
> > > > >
> > > >
> > >
> >
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by TingYao <ti...@apache.org>.
+1

- build images(ubuntu/amd64)
- run unit test
- deploy Yunikorn to kubernetes cluster

Thanks Peter

Tingyao

Peter Bacsko <ba...@gmail.com> 於 2022年9月5日 週一 下午4:20寫道:

> Thanks for the votes so far.
>
> Some folks are still out, so I'm extending the voting deadline until
> September 7, 2020 12:00pm CEST.
>
> Thanks,
> Peter
>
> On Sat, Sep 3, 2022 at 5:05 PM 陳Chen宥騰Yuteng <a0...@gmail.com> wrote:
>
> > +1
> > - Built ARM based image(arm64v8)
> > - Ran unit tests
> > - Deployed Yunikorn on Kubernetes cluster.
> > - Tried the sleep example. Pods could be scheduled by Yunikorn.
> >
> > Wilfred Spiegelenburg <wi...@apache.org> 於 2022年9月2日 週五 上午10:35寫道:
> >
> > > +1 (binding)
> > >
> > > - Verified signatures
> > > - Verified sha512 sum
> > > - Verified the LICENSE changes
> > > - Built ARM based image on Mac/amd64
> > > - Ran validation script to verify proper startup
> > > - Ran unit tests
> > >
> > > Filed YUNIKORN-1305 to fix the sha labeling in the generated image but
> > that
> > > is not important enough to stop the release.
> > >
> > > Wilfred
> > >
> > > On Fri, 2 Sept 2022 at 03:23, Craig Condit <cr...@craigcondit.com>
> > wrote:
> > >
> > > > +1.
> > > >
> > > > - Verified signatures
> > > > - Verified sha512 sum
> > > > - Built release (on Mac/amd64)
> > > > - Ran validation script to verify proper startup
> > > > - Executed e2e tests on both standard and plugin mode
> > > >
> > > > Other than a couple of flaky tests (known issue) everything looks
> > great.
> > > >
> > > > Thanks Peter for the release work!
> > > >
> > > >
> > > > Craig
> > > >
> > > >
> > > >
> > > > > On Sep 1, 2022, at 7:03 AM, Peter Bacsko <ba...@gmail.com>
> wrote:
> > > > >
> > > > > Thanks Craig.
> > > > >
> > > > > I re-generated the artifacts with just using "1.1.0" in
> > > > > release-configs.json.
> > > > >
> > > > > It's based the same code base/tags, so it's still the RC1.
> > > > >
> > > > > I removed the previous artifacts and the new ones are available
> here:
> > > > >  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > > > >
> > > > > Thanks,
> > > > > Peter
> > > > >
> > > > > On Wed, Aug 31, 2022 at 11:34 PM Wilfred Spiegelenburg <
> > > > wilfreds@apache.org>
> > > > > wrote:
> > > > >
> > > > >> The version that is used in the name is also in the substitutions
> in
> > > the
> > > > >> Makefile, helm charts etc.
> > > > >>
> > > > >> Updating the release-configs.json should be clarified in:
> > > > >> * update the version with the release version: examples: 0.12.2 or
> > > 1.1.0
> > > > >> * update the tags with the current release tag examples: 0.12.2-1
> or
> > > > >> 1.0.0-1
> > > > >>
> > > > >> We need to re-run the release tool with the update in the version.
> > > > >>
> > > > >> Wilfred
> > > > >>
> > > > >> On Thu, 1 Sept 2022 at 00:17, Craig Condit <cc...@apache.org>
> > > wrote:
> > > > >>
> > > > >>> Unfortunately, I have to vote -1 on this.
> > > > >>>
> > > > >>> Release candidates, if they are to become actual releases, must
> be
> > > > binary
> > > > >>> identical once voted upon and released. This archive contains
> > > numerous
> > > > >>> references to “RC1” including the top-level directory within the
> > > > archive
> > > > >>> itself. All of these will at a minimum change the sha512sum of
> the
> > > > >> archive,
> > > > >>> and logically result in different contents.
> > > > >>>
> > > > >>> However, I don’t see an issue with the source code, so simply
> > > > >> re-releasing
> > > > >>> the tarball without ‘-RC1’ in the version will probably work.
> > > > >>>
> > > > >>>
> > > > >>> Craig
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>> On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com>
> > > wrote:
> > > > >>>>
> > > > >>>> Hello everyone,
> > > > >>>>
> > > > >>>> I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
> > > > >>>>
> > > > >>>> The release artifacts have been uploaded here:
> > > > >>>> https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > > > >>>>
> > > > >>>> My public key is located here:
> > > > >>>> https://downloads.apache.org/yunikorn/KEYS
> > > > >>>>
> > > > >>>> JIRA issues that have been resolved in this release:
> > > > >>>> https://issues.apache.org/jira/issues/?filter=12352202
> > > > >>>>
> > > > >>>> Git tags for each component are as follows:
> > > > >>>>
> > > > >>>> incubator-yunikorn-scheduler-interface: v1.1.0-1
> > > > >>>> incubator-yunikorn-core: v1.1.0-1
> > > > >>>> incubator-yunikorn-k8shim: v1.1.0-1
> > > > >>>> incubator-yunikorn-web: v1.1.0-1
> > > > >>>> incubator-yunikorn-release: v1.1.0-1
> > > > >>>>
> > > > >>>> One the release is voted on and approved, all repos will be
> tagged
> > > > >> 1.1.0
> > > > >>>> for consistency.
> > > > >>>>
> > > > >>>> Please review and vote. The vote will be open for at least 72
> > hours
> > > > and
> > > > >>>> closes on Saturday, September 3 2022, 12pm CEST.
> > > > >>>>
> > > > >>>> [ ] +1 Approve
> > > > >>>> [ ] +0 No opinion
> > > > >>>> [ ] -1 Disapprove (and the reason why)
> > > > >>>>
> > > > >>>>
> > > > >>>> Thank you,
> > > > >>>> Peter
> > > > >>>
> > > > >>>
> > > > >>>
> > ---------------------------------------------------------------------
> > > > >>> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > > > >>> For additional commands, e-mail: dev-help@yunikorn.apache.org
> > > > >>>
> > > > >>>
> > > > >>
> > > >
> > > >
> > > > ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > > > For additional commands, e-mail: dev-help@yunikorn.apache.org
> > > >
> > > >
> > >
> >
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Peter Bacsko <ba...@gmail.com>.
Thanks for the votes so far.

Some folks are still out, so I'm extending the voting deadline until
September 7, 2020 12:00pm CEST.

Thanks,
Peter

On Sat, Sep 3, 2022 at 5:05 PM 陳Chen宥騰Yuteng <a0...@gmail.com> wrote:

> +1
> - Built ARM based image(arm64v8)
> - Ran unit tests
> - Deployed Yunikorn on Kubernetes cluster.
> - Tried the sleep example. Pods could be scheduled by Yunikorn.
>
> Wilfred Spiegelenburg <wi...@apache.org> 於 2022年9月2日 週五 上午10:35寫道:
>
> > +1 (binding)
> >
> > - Verified signatures
> > - Verified sha512 sum
> > - Verified the LICENSE changes
> > - Built ARM based image on Mac/amd64
> > - Ran validation script to verify proper startup
> > - Ran unit tests
> >
> > Filed YUNIKORN-1305 to fix the sha labeling in the generated image but
> that
> > is not important enough to stop the release.
> >
> > Wilfred
> >
> > On Fri, 2 Sept 2022 at 03:23, Craig Condit <cr...@craigcondit.com>
> wrote:
> >
> > > +1.
> > >
> > > - Verified signatures
> > > - Verified sha512 sum
> > > - Built release (on Mac/amd64)
> > > - Ran validation script to verify proper startup
> > > - Executed e2e tests on both standard and plugin mode
> > >
> > > Other than a couple of flaky tests (known issue) everything looks
> great.
> > >
> > > Thanks Peter for the release work!
> > >
> > >
> > > Craig
> > >
> > >
> > >
> > > > On Sep 1, 2022, at 7:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
> > > >
> > > > Thanks Craig.
> > > >
> > > > I re-generated the artifacts with just using "1.1.0" in
> > > > release-configs.json.
> > > >
> > > > It's based the same code base/tags, so it's still the RC1.
> > > >
> > > > I removed the previous artifacts and the new ones are available here:
> > > >  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > > >
> > > > Thanks,
> > > > Peter
> > > >
> > > > On Wed, Aug 31, 2022 at 11:34 PM Wilfred Spiegelenburg <
> > > wilfreds@apache.org>
> > > > wrote:
> > > >
> > > >> The version that is used in the name is also in the substitutions in
> > the
> > > >> Makefile, helm charts etc.
> > > >>
> > > >> Updating the release-configs.json should be clarified in:
> > > >> * update the version with the release version: examples: 0.12.2 or
> > 1.1.0
> > > >> * update the tags with the current release tag examples: 0.12.2-1 or
> > > >> 1.0.0-1
> > > >>
> > > >> We need to re-run the release tool with the update in the version.
> > > >>
> > > >> Wilfred
> > > >>
> > > >> On Thu, 1 Sept 2022 at 00:17, Craig Condit <cc...@apache.org>
> > wrote:
> > > >>
> > > >>> Unfortunately, I have to vote -1 on this.
> > > >>>
> > > >>> Release candidates, if they are to become actual releases, must be
> > > binary
> > > >>> identical once voted upon and released. This archive contains
> > numerous
> > > >>> references to “RC1” including the top-level directory within the
> > > archive
> > > >>> itself. All of these will at a minimum change the sha512sum of the
> > > >> archive,
> > > >>> and logically result in different contents.
> > > >>>
> > > >>> However, I don’t see an issue with the source code, so simply
> > > >> re-releasing
> > > >>> the tarball without ‘-RC1’ in the version will probably work.
> > > >>>
> > > >>>
> > > >>> Craig
> > > >>>
> > > >>>
> > > >>>
> > > >>>> On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com>
> > wrote:
> > > >>>>
> > > >>>> Hello everyone,
> > > >>>>
> > > >>>> I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
> > > >>>>
> > > >>>> The release artifacts have been uploaded here:
> > > >>>> https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > > >>>>
> > > >>>> My public key is located here:
> > > >>>> https://downloads.apache.org/yunikorn/KEYS
> > > >>>>
> > > >>>> JIRA issues that have been resolved in this release:
> > > >>>> https://issues.apache.org/jira/issues/?filter=12352202
> > > >>>>
> > > >>>> Git tags for each component are as follows:
> > > >>>>
> > > >>>> incubator-yunikorn-scheduler-interface: v1.1.0-1
> > > >>>> incubator-yunikorn-core: v1.1.0-1
> > > >>>> incubator-yunikorn-k8shim: v1.1.0-1
> > > >>>> incubator-yunikorn-web: v1.1.0-1
> > > >>>> incubator-yunikorn-release: v1.1.0-1
> > > >>>>
> > > >>>> One the release is voted on and approved, all repos will be tagged
> > > >> 1.1.0
> > > >>>> for consistency.
> > > >>>>
> > > >>>> Please review and vote. The vote will be open for at least 72
> hours
> > > and
> > > >>>> closes on Saturday, September 3 2022, 12pm CEST.
> > > >>>>
> > > >>>> [ ] +1 Approve
> > > >>>> [ ] +0 No opinion
> > > >>>> [ ] -1 Disapprove (and the reason why)
> > > >>>>
> > > >>>>
> > > >>>> Thank you,
> > > >>>> Peter
> > > >>>
> > > >>>
> > > >>>
> ---------------------------------------------------------------------
> > > >>> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > > >>> For additional commands, e-mail: dev-help@yunikorn.apache.org
> > > >>>
> > > >>>
> > > >>
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > > For additional commands, e-mail: dev-help@yunikorn.apache.org
> > >
> > >
> >
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by 陳Chen宥騰Yuteng <a0...@gmail.com>.
+1
- Built ARM based image(arm64v8)
- Ran unit tests
- Deployed Yunikorn on Kubernetes cluster.
- Tried the sleep example. Pods could be scheduled by Yunikorn.

Wilfred Spiegelenburg <wi...@apache.org> 於 2022年9月2日 週五 上午10:35寫道:

> +1 (binding)
>
> - Verified signatures
> - Verified sha512 sum
> - Verified the LICENSE changes
> - Built ARM based image on Mac/amd64
> - Ran validation script to verify proper startup
> - Ran unit tests
>
> Filed YUNIKORN-1305 to fix the sha labeling in the generated image but that
> is not important enough to stop the release.
>
> Wilfred
>
> On Fri, 2 Sept 2022 at 03:23, Craig Condit <cr...@craigcondit.com> wrote:
>
> > +1.
> >
> > - Verified signatures
> > - Verified sha512 sum
> > - Built release (on Mac/amd64)
> > - Ran validation script to verify proper startup
> > - Executed e2e tests on both standard and plugin mode
> >
> > Other than a couple of flaky tests (known issue) everything looks great.
> >
> > Thanks Peter for the release work!
> >
> >
> > Craig
> >
> >
> >
> > > On Sep 1, 2022, at 7:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
> > >
> > > Thanks Craig.
> > >
> > > I re-generated the artifacts with just using "1.1.0" in
> > > release-configs.json.
> > >
> > > It's based the same code base/tags, so it's still the RC1.
> > >
> > > I removed the previous artifacts and the new ones are available here:
> > >  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > >
> > > Thanks,
> > > Peter
> > >
> > > On Wed, Aug 31, 2022 at 11:34 PM Wilfred Spiegelenburg <
> > wilfreds@apache.org>
> > > wrote:
> > >
> > >> The version that is used in the name is also in the substitutions in
> the
> > >> Makefile, helm charts etc.
> > >>
> > >> Updating the release-configs.json should be clarified in:
> > >> * update the version with the release version: examples: 0.12.2 or
> 1.1.0
> > >> * update the tags with the current release tag examples: 0.12.2-1 or
> > >> 1.0.0-1
> > >>
> > >> We need to re-run the release tool with the update in the version.
> > >>
> > >> Wilfred
> > >>
> > >> On Thu, 1 Sept 2022 at 00:17, Craig Condit <cc...@apache.org>
> wrote:
> > >>
> > >>> Unfortunately, I have to vote -1 on this.
> > >>>
> > >>> Release candidates, if they are to become actual releases, must be
> > binary
> > >>> identical once voted upon and released. This archive contains
> numerous
> > >>> references to “RC1” including the top-level directory within the
> > archive
> > >>> itself. All of these will at a minimum change the sha512sum of the
> > >> archive,
> > >>> and logically result in different contents.
> > >>>
> > >>> However, I don’t see an issue with the source code, so simply
> > >> re-releasing
> > >>> the tarball without ‘-RC1’ in the version will probably work.
> > >>>
> > >>>
> > >>> Craig
> > >>>
> > >>>
> > >>>
> > >>>> On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com>
> wrote:
> > >>>>
> > >>>> Hello everyone,
> > >>>>
> > >>>> I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
> > >>>>
> > >>>> The release artifacts have been uploaded here:
> > >>>> https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > >>>>
> > >>>> My public key is located here:
> > >>>> https://downloads.apache.org/yunikorn/KEYS
> > >>>>
> > >>>> JIRA issues that have been resolved in this release:
> > >>>> https://issues.apache.org/jira/issues/?filter=12352202
> > >>>>
> > >>>> Git tags for each component are as follows:
> > >>>>
> > >>>> incubator-yunikorn-scheduler-interface: v1.1.0-1
> > >>>> incubator-yunikorn-core: v1.1.0-1
> > >>>> incubator-yunikorn-k8shim: v1.1.0-1
> > >>>> incubator-yunikorn-web: v1.1.0-1
> > >>>> incubator-yunikorn-release: v1.1.0-1
> > >>>>
> > >>>> One the release is voted on and approved, all repos will be tagged
> > >> 1.1.0
> > >>>> for consistency.
> > >>>>
> > >>>> Please review and vote. The vote will be open for at least 72 hours
> > and
> > >>>> closes on Saturday, September 3 2022, 12pm CEST.
> > >>>>
> > >>>> [ ] +1 Approve
> > >>>> [ ] +0 No opinion
> > >>>> [ ] -1 Disapprove (and the reason why)
> > >>>>
> > >>>>
> > >>>> Thank you,
> > >>>> Peter
> > >>>
> > >>>
> > >>> ---------------------------------------------------------------------
> > >>> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > >>> For additional commands, e-mail: dev-help@yunikorn.apache.org
> > >>>
> > >>>
> > >>
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > For additional commands, e-mail: dev-help@yunikorn.apache.org
> >
> >
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Wilfred Spiegelenburg <wi...@apache.org>.
+1 (binding)

- Verified signatures
- Verified sha512 sum
- Verified the LICENSE changes
- Built ARM based image on Mac/amd64
- Ran validation script to verify proper startup
- Ran unit tests

Filed YUNIKORN-1305 to fix the sha labeling in the generated image but that
is not important enough to stop the release.

Wilfred

On Fri, 2 Sept 2022 at 03:23, Craig Condit <cr...@craigcondit.com> wrote:

> +1.
>
> - Verified signatures
> - Verified sha512 sum
> - Built release (on Mac/amd64)
> - Ran validation script to verify proper startup
> - Executed e2e tests on both standard and plugin mode
>
> Other than a couple of flaky tests (known issue) everything looks great.
>
> Thanks Peter for the release work!
>
>
> Craig
>
>
>
> > On Sep 1, 2022, at 7:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
> >
> > Thanks Craig.
> >
> > I re-generated the artifacts with just using "1.1.0" in
> > release-configs.json.
> >
> > It's based the same code base/tags, so it's still the RC1.
> >
> > I removed the previous artifacts and the new ones are available here:
> >  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> >
> > Thanks,
> > Peter
> >
> > On Wed, Aug 31, 2022 at 11:34 PM Wilfred Spiegelenburg <
> wilfreds@apache.org>
> > wrote:
> >
> >> The version that is used in the name is also in the substitutions in the
> >> Makefile, helm charts etc.
> >>
> >> Updating the release-configs.json should be clarified in:
> >> * update the version with the release version: examples: 0.12.2 or 1.1.0
> >> * update the tags with the current release tag examples: 0.12.2-1 or
> >> 1.0.0-1
> >>
> >> We need to re-run the release tool with the update in the version.
> >>
> >> Wilfred
> >>
> >> On Thu, 1 Sept 2022 at 00:17, Craig Condit <cc...@apache.org> wrote:
> >>
> >>> Unfortunately, I have to vote -1 on this.
> >>>
> >>> Release candidates, if they are to become actual releases, must be
> binary
> >>> identical once voted upon and released. This archive contains numerous
> >>> references to “RC1” including the top-level directory within the
> archive
> >>> itself. All of these will at a minimum change the sha512sum of the
> >> archive,
> >>> and logically result in different contents.
> >>>
> >>> However, I don’t see an issue with the source code, so simply
> >> re-releasing
> >>> the tarball without ‘-RC1’ in the version will probably work.
> >>>
> >>>
> >>> Craig
> >>>
> >>>
> >>>
> >>>> On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
> >>>>
> >>>> Hello everyone,
> >>>>
> >>>> I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
> >>>>
> >>>> The release artifacts have been uploaded here:
> >>>> https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> >>>>
> >>>> My public key is located here:
> >>>> https://downloads.apache.org/yunikorn/KEYS
> >>>>
> >>>> JIRA issues that have been resolved in this release:
> >>>> https://issues.apache.org/jira/issues/?filter=12352202
> >>>>
> >>>> Git tags for each component are as follows:
> >>>>
> >>>> incubator-yunikorn-scheduler-interface: v1.1.0-1
> >>>> incubator-yunikorn-core: v1.1.0-1
> >>>> incubator-yunikorn-k8shim: v1.1.0-1
> >>>> incubator-yunikorn-web: v1.1.0-1
> >>>> incubator-yunikorn-release: v1.1.0-1
> >>>>
> >>>> One the release is voted on and approved, all repos will be tagged
> >> 1.1.0
> >>>> for consistency.
> >>>>
> >>>> Please review and vote. The vote will be open for at least 72 hours
> and
> >>>> closes on Saturday, September 3 2022, 12pm CEST.
> >>>>
> >>>> [ ] +1 Approve
> >>>> [ ] +0 No opinion
> >>>> [ ] -1 Disapprove (and the reason why)
> >>>>
> >>>>
> >>>> Thank you,
> >>>> Peter
> >>>
> >>>
> >>> ---------------------------------------------------------------------
> >>> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> >>> For additional commands, e-mail: dev-help@yunikorn.apache.org
> >>>
> >>>
> >>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> For additional commands, e-mail: dev-help@yunikorn.apache.org
>
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Craig Condit <cr...@craigcondit.com>.
+1.

- Verified signatures
- Verified sha512 sum
- Built release (on Mac/amd64)
- Ran validation script to verify proper startup
- Executed e2e tests on both standard and plugin mode

Other than a couple of flaky tests (known issue) everything looks great.

Thanks Peter for the release work!


Craig



> On Sep 1, 2022, at 7:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
> 
> Thanks Craig.
> 
> I re-generated the artifacts with just using "1.1.0" in
> release-configs.json.
> 
> It's based the same code base/tags, so it's still the RC1.
> 
> I removed the previous artifacts and the new ones are available here:
>  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> 
> Thanks,
> Peter
> 
> On Wed, Aug 31, 2022 at 11:34 PM Wilfred Spiegelenburg <wi...@apache.org>
> wrote:
> 
>> The version that is used in the name is also in the substitutions in the
>> Makefile, helm charts etc.
>> 
>> Updating the release-configs.json should be clarified in:
>> * update the version with the release version: examples: 0.12.2 or 1.1.0
>> * update the tags with the current release tag examples: 0.12.2-1 or
>> 1.0.0-1
>> 
>> We need to re-run the release tool with the update in the version.
>> 
>> Wilfred
>> 
>> On Thu, 1 Sept 2022 at 00:17, Craig Condit <cc...@apache.org> wrote:
>> 
>>> Unfortunately, I have to vote -1 on this.
>>> 
>>> Release candidates, if they are to become actual releases, must be binary
>>> identical once voted upon and released. This archive contains numerous
>>> references to “RC1” including the top-level directory within the archive
>>> itself. All of these will at a minimum change the sha512sum of the
>> archive,
>>> and logically result in different contents.
>>> 
>>> However, I don’t see an issue with the source code, so simply
>> re-releasing
>>> the tarball without ‘-RC1’ in the version will probably work.
>>> 
>>> 
>>> Craig
>>> 
>>> 
>>> 
>>>> On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
>>>> 
>>>> Hello everyone,
>>>> 
>>>> I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
>>>> 
>>>> The release artifacts have been uploaded here:
>>>> https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
>>>> 
>>>> My public key is located here:
>>>> https://downloads.apache.org/yunikorn/KEYS
>>>> 
>>>> JIRA issues that have been resolved in this release:
>>>> https://issues.apache.org/jira/issues/?filter=12352202
>>>> 
>>>> Git tags for each component are as follows:
>>>> 
>>>> incubator-yunikorn-scheduler-interface: v1.1.0-1
>>>> incubator-yunikorn-core: v1.1.0-1
>>>> incubator-yunikorn-k8shim: v1.1.0-1
>>>> incubator-yunikorn-web: v1.1.0-1
>>>> incubator-yunikorn-release: v1.1.0-1
>>>> 
>>>> One the release is voted on and approved, all repos will be tagged
>> 1.1.0
>>>> for consistency.
>>>> 
>>>> Please review and vote. The vote will be open for at least 72 hours and
>>>> closes on Saturday, September 3 2022, 12pm CEST.
>>>> 
>>>> [ ] +1 Approve
>>>> [ ] +0 No opinion
>>>> [ ] -1 Disapprove (and the reason why)
>>>> 
>>>> 
>>>> Thank you,
>>>> Peter
>>> 
>>> 
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
>>> For additional commands, e-mail: dev-help@yunikorn.apache.org
>>> 
>>> 
>> 


---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
For additional commands, e-mail: dev-help@yunikorn.apache.org


Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Peter Bacsko <ba...@gmail.com>.
Thanks Craig.

I re-generated the artifacts with just using "1.1.0" in
release-configs.json.

It's based the same code base/tags, so it's still the RC1.

I removed the previous artifacts and the new ones are available here:
  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/

Thanks,
Peter

On Wed, Aug 31, 2022 at 11:34 PM Wilfred Spiegelenburg <wi...@apache.org>
wrote:

> The version that is used in the name is also in the substitutions in the
> Makefile, helm charts etc.
>
> Updating the release-configs.json should be clarified in:
> * update the version with the release version: examples: 0.12.2 or 1.1.0
> * update the tags with the current release tag examples: 0.12.2-1 or
> 1.0.0-1
>
> We need to re-run the release tool with the update in the version.
>
> Wilfred
>
> On Thu, 1 Sept 2022 at 00:17, Craig Condit <cc...@apache.org> wrote:
>
> > Unfortunately, I have to vote -1 on this.
> >
> > Release candidates, if they are to become actual releases, must be binary
> > identical once voted upon and released. This archive contains numerous
> > references to “RC1” including the top-level directory within the archive
> > itself. All of these will at a minimum change the sha512sum of the
> archive,
> > and logically result in different contents.
> >
> > However, I don’t see an issue with the source code, so simply
> re-releasing
> > the tarball without ‘-RC1’ in the version will probably work.
> >
> >
> > Craig
> >
> >
> >
> > > On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
> > >
> > > Hello everyone,
> > >
> > > I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
> > >
> > > The release artifacts have been uploaded here:
> > >  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> > >
> > > My public key is located here:
> > >  https://downloads.apache.org/yunikorn/KEYS
> > >
> > > JIRA issues that have been resolved in this release:
> > >  https://issues.apache.org/jira/issues/?filter=12352202
> > >
> > > Git tags for each component are as follows:
> > >
> > > incubator-yunikorn-scheduler-interface: v1.1.0-1
> > > incubator-yunikorn-core: v1.1.0-1
> > > incubator-yunikorn-k8shim: v1.1.0-1
> > > incubator-yunikorn-web: v1.1.0-1
> > > incubator-yunikorn-release: v1.1.0-1
> > >
> > > One the release is voted on and approved, all repos will be tagged
> 1.1.0
> > > for consistency.
> > >
> > > Please review and vote. The vote will be open for at least 72 hours and
> > > closes on Saturday, September 3 2022, 12pm CEST.
> > >
> > > [ ] +1 Approve
> > > [ ] +0 No opinion
> > > [ ] -1 Disapprove (and the reason why)
> > >
> > >
> > > Thank you,
> > > Peter
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> > For additional commands, e-mail: dev-help@yunikorn.apache.org
> >
> >
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Wilfred Spiegelenburg <wi...@apache.org>.
The version that is used in the name is also in the substitutions in the
Makefile, helm charts etc.

Updating the release-configs.json should be clarified in:
* update the version with the release version: examples: 0.12.2 or 1.1.0
* update the tags with the current release tag examples: 0.12.2-1 or 1.0.0-1

We need to re-run the release tool with the update in the version.

Wilfred

On Thu, 1 Sept 2022 at 00:17, Craig Condit <cc...@apache.org> wrote:

> Unfortunately, I have to vote -1 on this.
>
> Release candidates, if they are to become actual releases, must be binary
> identical once voted upon and released. This archive contains numerous
> references to “RC1” including the top-level directory within the archive
> itself. All of these will at a minimum change the sha512sum of the archive,
> and logically result in different contents.
>
> However, I don’t see an issue with the source code, so simply re-releasing
> the tarball without ‘-RC1’ in the version will probably work.
>
>
> Craig
>
>
>
> > On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
> >
> > Hello everyone,
> >
> > I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
> >
> > The release artifacts have been uploaded here:
> >  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> >
> > My public key is located here:
> >  https://downloads.apache.org/yunikorn/KEYS
> >
> > JIRA issues that have been resolved in this release:
> >  https://issues.apache.org/jira/issues/?filter=12352202
> >
> > Git tags for each component are as follows:
> >
> > incubator-yunikorn-scheduler-interface: v1.1.0-1
> > incubator-yunikorn-core: v1.1.0-1
> > incubator-yunikorn-k8shim: v1.1.0-1
> > incubator-yunikorn-web: v1.1.0-1
> > incubator-yunikorn-release: v1.1.0-1
> >
> > One the release is voted on and approved, all repos will be tagged 1.1.0
> > for consistency.
> >
> > Please review and vote. The vote will be open for at least 72 hours and
> > closes on Saturday, September 3 2022, 12pm CEST.
> >
> > [ ] +1 Approve
> > [ ] +0 No opinion
> > [ ] -1 Disapprove (and the reason why)
> >
> >
> > Thank you,
> > Peter
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
> For additional commands, e-mail: dev-help@yunikorn.apache.org
>
>

Re: [VOTE] Release Apache YuniKorn 1.1.0 RC1

Posted by Craig Condit <cc...@apache.org>.
Unfortunately, I have to vote -1 on this.

Release candidates, if they are to become actual releases, must be binary identical once voted upon and released. This archive contains numerous references to “RC1” including the top-level directory within the archive itself. All of these will at a minimum change the sha512sum of the archive, and logically result in different contents.

However, I don’t see an issue with the source code, so simply re-releasing the tarball without ‘-RC1’ in the version will probably work.


Craig



> On Aug 31, 2022, at 5:03 AM, Peter Bacsko <ba...@gmail.com> wrote:
> 
> Hello everyone,
> 
> I’d like to call a vote for releasing Apache YuniKorn 1.1.0 RC1.
> 
> The release artifacts have been uploaded here:
>  https://dist.apache.org/repos/dist/dev/yunikorn/1.1.0-RC1/
> 
> My public key is located here:
>  https://downloads.apache.org/yunikorn/KEYS
> 
> JIRA issues that have been resolved in this release:
>  https://issues.apache.org/jira/issues/?filter=12352202
> 
> Git tags for each component are as follows:
> 
> incubator-yunikorn-scheduler-interface: v1.1.0-1
> incubator-yunikorn-core: v1.1.0-1
> incubator-yunikorn-k8shim: v1.1.0-1
> incubator-yunikorn-web: v1.1.0-1
> incubator-yunikorn-release: v1.1.0-1
> 
> One the release is voted on and approved, all repos will be tagged 1.1.0
> for consistency.
> 
> Please review and vote. The vote will be open for at least 72 hours and
> closes on Saturday, September 3 2022, 12pm CEST.
> 
> [ ] +1 Approve
> [ ] +0 No opinion
> [ ] -1 Disapprove (and the reason why)
> 
> 
> Thank you,
> Peter


---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@yunikorn.apache.org
For additional commands, e-mail: dev-help@yunikorn.apache.org