You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by Tom Meierjürgen <to...@web.de> on 2021/12/01 15:42:38 UTC
Re: Video Recording Problems ->Viedoe Part missed for conversion
Am 18.11.2021 um 09:55 schrieb Tom Meierjürgen:
>
>
> Am 18.11.2021 um 08:52 schrieb Maxim Solodovnik:
>>
> ...(cut done stuff)
>>
>> All i have to figure out now for my small 2 node cluster is why
>> the switch to another room on the other node still results in
>> seeing only my own stream but not the opponents (tested with 2
>> computers here in my lan and 2 others from another lan at same
>> time,after switch every computer has only its own streams
>> visible+hearable)...
>>
>>
>> Do you have TURN server?
>> Is it configured properly?
>
> For sure i have one turnserver per node running ;-)
>
> Heres my turnserver config stripped down to all lines without the
> commented lines and personal information replaced by placeholders
> which tells the kind of content, maybe i have forgoten something in there?
>
> /etc/turnserver.conf :
>
> ######################Start#####################
> listening-port=3478
>
> listening-ip=$Docker-Bridge_Interface-IP$
> listening-ip=$External-Node-IP$
> listening-ip=$Internal-own-IPSEC/GRE-Tunnel-IP$
>
> relay-ip=$Internal_own_IPSEC/GRE-Tunnel-IP$
>
> min-port=49152
> max-port=65535
>
> fingerprint
>
> use-auth-secret
>
> static-auth-secret=$Same_secret_as_in_OM_Kurento-configurationpart_of_openmeetings.properties$
>
> server-name=$Nameresolutionadress_of_the_node$
>
> realm=$Domainame_as_Realm$
>
> stale-nonce=0
>
> log-file=/var/log/turnserver/turn.log
>
> syslog
>
> allowed-peer-ip=$Internal_other_nodes_IPSEC/GRE_Tunnel-IP$
> allowed-peer-ip=$External_other_nodes_IP$
>
> pidfile="/var/run/turnserver.pid"
>
> ###########################End################
>
> when i put "lt-cred-mech" additionally in there as mentioned somewhere
> in the mailinglist before, my coturn won´t start up and in the logs it
> tells me to use either lt-cred-mech or use stat-auth but not both at
> the same time...
>
>
> Hope this helps locating the reasons for my Node-switching problem
> with the streams...
>
>
Does anyone on the list have a hint for me if this config has something
in which may cause the Node-Switchingproblems?
>
> kind regards,
>
> Tom
>
Re: Video Recording Problems ->Viedoe Part missed for conversion
Posted by Tom Meierjürgen <to...@web.de>.
Hello Maxim,
Am 02.12.2021 um 08:18 schrieb Maxim Solodovnik:
> Hello Tom,
>
> coturn config looks good
> this config has placeholders like
> listening-ip=$Docker-Bridge_Interface-IP$
> do you have something like this in the openmeetings.properties as well?
These Placeholders are not in the real config,there are the according
ip-addresses ;-)
I used the placehodlers inside the published config to state clearly
which ip-address is used (coturn is listening as well to external ip and
docker bridge interface at the same time) where and inside
openmeetings.properties i use the ip of the external interface as
websocket-adress for kms and the external ip for kms.turn.url,
switching the kms.turn.url also to docker bridge ip leads to only seeing
my own streams so i kept using the external ip actually, but then i got
the mentioned switchingproblems when using a second room running on the
other node at the same time :-/
> On Wed, 1 Dec 2021 at 22:42, Tom Meierjürgen <to...@web.de> wrote:
>>
>> Am 18.11.2021 um 09:55 schrieb Tom Meierjürgen:
>>
>>
>> Am 18.11.2021 um 08:52 schrieb Maxim Solodovnik:
>>
>>
>> ...(cut done stuff)
>>> All i have to figure out now for my small 2 node cluster is why the switch to another room on the other node still results in seeing only my own stream but not the opponents (tested with 2 computers here in my lan and 2 others from another lan at same time,after switch every computer has only its own streams visible+hearable)...
>>
>> Do you have TURN server?
>> Is it configured properly?
>>
>> For sure i have one turnserver per node running ;-)
>>
>> Heres my turnserver config stripped down to all lines without the commented lines and personal information replaced by placeholders which tells the kind of content, maybe i have forgoten something in there?
>>
>> /etc/turnserver.conf :
>>
>> ######################Start#####################
>> listening-port=3478
>>
>> listening-ip=$Docker-Bridge_Interface-IP$
>> listening-ip=$External-Node-IP$
>> listening-ip=$Internal-own-IPSEC/GRE-Tunnel-IP$
>>
>> relay-ip=$Internal_own_IPSEC/GRE-Tunnel-IP$
>>
>> min-port=49152
>> max-port=65535
>>
>> fingerprint
>>
>> use-auth-secret
>>
>> static-auth-secret=$Same_secret_as_in_OM_Kurento-configurationpart_of_openmeetings.properties$
>>
>> server-name=$Nameresolutionadress_of_the_node$
>>
>> realm=$Domainame_as_Realm$
>>
>> stale-nonce=0
>>
>> log-file=/var/log/turnserver/turn.log
>>
>> syslog
>>
>> allowed-peer-ip=$Internal_other_nodes_IPSEC/GRE_Tunnel-IP$
>> allowed-peer-ip=$External_other_nodes_IP$
>>
>> pidfile="/var/run/turnserver.pid"
>>
>> ###########################End################
>>
>> when i put "lt-cred-mech" additionally in there as mentioned somewhere in the mailinglist before, my coturn won´t start up and in the logs it tells me to use either lt-cred-mech or use stat-auth but not both at the same time...
>>
>>
>> Hope this helps locating the reasons for my Node-switching problem with the streams...
>>
>>
>> Does anyone on the list have a hint for me if this config has something in which may cause the Node-Switchingproblems?
>>
>> kind regards,
>>
>> Tom
>>
>>
>
Re: Video Recording Problems ->Viedoe Part missed for conversion
Posted by Maxim Solodovnik <so...@gmail.com>.
Hello Tom,
coturn config looks good
this config has placeholders like
listening-ip=$Docker-Bridge_Interface-IP$
do you have something like this in the openmeetings.properties as well?
On Wed, 1 Dec 2021 at 22:42, Tom Meierjürgen <to...@web.de> wrote:
>
>
> Am 18.11.2021 um 09:55 schrieb Tom Meierjürgen:
>
>
> Am 18.11.2021 um 08:52 schrieb Maxim Solodovnik:
>
>
> ...(cut done stuff)
>>
>> All i have to figure out now for my small 2 node cluster is why the switch to another room on the other node still results in seeing only my own stream but not the opponents (tested with 2 computers here in my lan and 2 others from another lan at same time,after switch every computer has only its own streams visible+hearable)...
>
>
> Do you have TURN server?
> Is it configured properly?
>
> For sure i have one turnserver per node running ;-)
>
> Heres my turnserver config stripped down to all lines without the commented lines and personal information replaced by placeholders which tells the kind of content, maybe i have forgoten something in there?
>
> /etc/turnserver.conf :
>
> ######################Start#####################
> listening-port=3478
>
> listening-ip=$Docker-Bridge_Interface-IP$
> listening-ip=$External-Node-IP$
> listening-ip=$Internal-own-IPSEC/GRE-Tunnel-IP$
>
> relay-ip=$Internal_own_IPSEC/GRE-Tunnel-IP$
>
> min-port=49152
> max-port=65535
>
> fingerprint
>
> use-auth-secret
>
> static-auth-secret=$Same_secret_as_in_OM_Kurento-configurationpart_of_openmeetings.properties$
>
> server-name=$Nameresolutionadress_of_the_node$
>
> realm=$Domainame_as_Realm$
>
> stale-nonce=0
>
> log-file=/var/log/turnserver/turn.log
>
> syslog
>
> allowed-peer-ip=$Internal_other_nodes_IPSEC/GRE_Tunnel-IP$
> allowed-peer-ip=$External_other_nodes_IP$
>
> pidfile="/var/run/turnserver.pid"
>
> ###########################End################
>
> when i put "lt-cred-mech" additionally in there as mentioned somewhere in the mailinglist before, my coturn won´t start up and in the logs it tells me to use either lt-cred-mech or use stat-auth but not both at the same time...
>
>
> Hope this helps locating the reasons for my Node-switching problem with the streams...
>
>
> Does anyone on the list have a hint for me if this config has something in which may cause the Node-Switchingproblems?
>
> kind regards,
>
> Tom
>
>
--
Best regards,
Maxim