You are viewing a plain text version of this content. The canonical link for it is here.
Posted to notifications@superset.apache.org by "bikashbarua (via GitHub)" <gi...@apache.org> on 2026/01/23 18:57:33 UTC
[PR] Fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
bikashbarua opened a new pull request, #37403:
URL: https://github.com/apache/superset/pull/37403
This PR renames the “Truncate Axis” control label to “Truncate Y Axis” to maintain consistency with the existing “Truncate X Axis” option in bar chart controls.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "sadpandajoe (via GitHub)" <gi...@apache.org>.
sadpandajoe commented on code in PR #37403:
URL: https://github.com/apache/superset/pull/37403#discussion_r2744167017
##########
superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx:
##########
@@ -243,10 +243,10 @@ function createAxisControl(axis: 'x' | 'y'): ControlSetRow[] {
name: 'truncateYAxis',
config: {
type: 'CheckboxControl',
- label: t('Truncate Axis'),
+ label: t('Truncate Y Axis'),
default: truncateYAxis,
renderTrigger: true,
- description: t('It’s not recommended to truncate axis in Bar chart.'),
+ description: t('It’s not recommended to truncate Y axis in Bar chart.'),
Review Comment:
```suggestion
description: t(
'It’s not recommended to truncate Y axis in Bar chart.',
),
```
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "codeant-ai-for-open-source[bot] (via GitHub)" <gi...@apache.org>.
codeant-ai-for-open-source[bot] commented on code in PR #37403:
URL: https://github.com/apache/superset/pull/37403#discussion_r2745075636
##########
superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx:
##########
@@ -243,10 +243,12 @@ function createAxisControl(axis: 'x' | 'y'): ControlSetRow[] {
name: 'truncateYAxis',
config: {
type: 'CheckboxControl',
- label: t('Truncate Axis'),
+ label: t('Truncate Y Axis'),
Review Comment:
**Suggestion:** Logic bug: the control's label is hardcoded to "Truncate Y Axis" but this control is emitted for both X and Y axis sections (createAxisControl is called with 'x' and 'y'), so the X Axis section may display a misleading "Truncate Y Axis" label; make the label axis-aware by choosing "Truncate X Axis" or "Truncate Y Axis" based on the `axis` parameter. [logic error]
<details>
<summary><b>Severity Level:</b> Major ⚠️</summary>
```mdx
- ⚠️ X Axis subsection shows wrong label text.
- ⚠️ Users may misconfigure axis truncation settings.
- ⚠️ Chart Options UI consistency degraded.
```
</details>
```suggestion
label: t(axis === 'x' ? 'Truncate X Axis' : 'Truncate Y Axis'),
```
<details>
<summary><b>Steps of Reproduction ✅ </b></summary>
```mdx
1. Open file
superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx
and locate the truncate control at lines shown in the PR: the label line at 246 (see "246
label: t('Truncate Y Axis'),"). The control is defined inside function
createAxisControl(axis: 'x' | 'y').
2. In the same file, find the control panel config where createAxisControl('x') is invoked
(Chart Options → X Axis subsection). The X-axis subsection includes the output of
createAxisControl('x') (the call is present in the config's controlSetRows).
3. Start the frontend dev server and open the Bar chart control panel, choose the Chart
Options → X Axis subsection while the chart is set to a horizontal orientation (visibility
condition: isHorizontal(controls) triggers the control). The control renders with the
label text from line 246.
4. Observe the visible label reads "Truncate Y Axis" even though you're inspecting the X
Axis subsection — this is caused by the hardcoded string at controlPanel.tsx:246 inside
createAxisControl, and is reproducible whenever createAxisControl('x') is rendered (e.g.,
horizontal bar orientation). The mismatch is a UX/label bug rather than a runtime crash.
```
</details>
<details>
<summary><b>Prompt for AI Agent 🤖 </b></summary>
```mdx
This is a comment left during a code review.
**Path:** superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx
**Line:** 246:246
**Comment:**
*Logic Error: Logic bug: the control's label is hardcoded to "Truncate Y Axis" but this control is emitted for both X and Y axis sections (createAxisControl is called with 'x' and 'y'), so the X Axis section may display a misleading "Truncate Y Axis" label; make the label axis-aware by choosing "Truncate X Axis" or "Truncate Y Axis" based on the `axis` parameter.
Validate the correctness of the flagged issue. If correct, How can I resolve this? If you propose a fix, implement it and please make it concise.
```
</details>
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "SBIN2010 (via GitHub)" <gi...@apache.org>.
SBIN2010 commented on code in PR #37403:
URL: https://github.com/apache/superset/pull/37403#discussion_r2743915074
##########
superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx:
##########
@@ -243,10 +243,10 @@ function createAxisControl(axis: 'x' | 'y'): ControlSetRow[] {
name: 'truncateYAxis',
config: {
type: 'CheckboxControl',
- label: t('Truncate Axis'),
+ label: t('Truncate Y Axis'),
default: truncateYAxis,
renderTrigger: true,
- description: t('It’s not recommended to truncate axis in Bar chart.'),
+ description: t('It’s not recommended to truncate Y axis in Bar chart.'),
Review Comment:
Run pre-commit on this file with the command:
pre-commit run --files superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx
And you will see changes:
description: t(
'It’s not recommended to truncate Y axis in Bar chart.',
),
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "rusackas (via GitHub)" <gi...@apache.org>.
rusackas commented on code in PR #37403:
URL: https://github.com/apache/superset/pull/37403#discussion_r2767213042
##########
superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx:
##########
@@ -243,10 +243,12 @@ function createAxisControl(axis: 'x' | 'y'): ControlSetRow[] {
name: 'truncateYAxis',
config: {
type: 'CheckboxControl',
- label: t('Truncate Axis'),
+ label: t('Truncate Y Axis'),
Review Comment:
@bikashbarua @sadpandajoe this is the question I was asking about earlier... should we take this suggestion?
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] Fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "rusackas (via GitHub)" <gi...@apache.org>.
rusackas commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3791902367
Does this need to be made dynamic (with a substituted X/Y string in the t() function) depending on whether it's horizontal/vertical?
Also, I note it says in the control it's not recommended to use this control in bar charts... should we just ignore/hide the control in this case?
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "msyavuz (via GitHub)" <gi...@apache.org>.
msyavuz merged PR #37403:
URL: https://github.com/apache/superset/pull/37403
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] Fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "bito-code-review[bot] (via GitHub)" <gi...@apache.org>.
bito-code-review[bot] commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3791814271
AI Code Review is in progress (usually takes 3 to 15 minutes unless it's a very large PR).
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "EnxDev (via GitHub)" <gi...@apache.org>.
EnxDev commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3794357751
Superset uses Git pre-commit hooks courtesy of [pre-commit](https://pre-commit.com/). To install run the following:
```
pip3 install -r requirements/development.txt
pre-commit install
```
A series of checks will now run when you make a git commit.
Alternatively it is possible to run pre-commit by running pre-commit manually:
`pre-commit run --all-files`
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "bito-code-review[bot] (via GitHub)" <gi...@apache.org>.
bito-code-review[bot] commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3820884755
<!-- Bito Reply -->
This question isn’t related to the pull request. I can only help with questions about the PR’s code or comments.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "sfirke (via GitHub)" <gi...@apache.org>.
sfirke commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3792381937
> Does this need to be made dynamic (with a substituted X/Y string in the t() function) depending on whether it's horizontal/vertical?
This is a good question, the names of the controls are confusing when the chart is horizontally-rotated. But that would be a bigger thing, we would need to update all of the controls where it says Y Axis Title, etc. Would they all flip together when the horizontal checkbox is clicked? Anyway, I think that's a separate matter.
> Also, I note it says in the control it's not recommended to use this control in bar charts... should we just ignore/hide the control in this case?
My quick take is that there are legitimate uses for it and if it's commonly *mis*used, that's a bad choice by the author, not the fault of the tool that makes it possible. I think Superset's better if we keep this control.
I was just using it for a bar chart showing average customer satisfaction by category. The customer sat rating is on a scale of 1-5, so since 1 is the lowest possible value, I truncated the y-axis to start at 1.
Here's a better example, showing average golf scores. Since that scale doesn't begin at 0 it feels wrong to start the y-axis there:
<img width="596" height="371" alt="1lws2d7gmzh81" src="https://github.com/user-attachments/assets/0ee65346-9cb0-42ab-bb96-7c18fe6fed7e" />
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "bikashbarua (via GitHub)" <gi...@apache.org>.
bikashbarua commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3794589232
I ran pre-commit locally (Windows / Git Bash). Core checks passed. Some hooks (helm-docs, docs sync) fail locally due to Windows/Bash tooling. The PR is scoped only to the Y-axis truncation UI change, relying on CI for remaining checks.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "sfirke (via GitHub)" <gi...@apache.org>.
sfirke commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3819637449
It won't let me merge because of the failing pre-commit check. The check says that prettier made changes to the file you modified. I don't see what would get changed, but anyway we're stuck. When you run pre-commit locally, does prettier modify anything? I will also try re-running the CI test.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "codeant-ai-for-open-source[bot] (via GitHub)" <gi...@apache.org>.
codeant-ai-for-open-source[bot] commented on code in PR #37403:
URL: https://github.com/apache/superset/pull/37403#discussion_r2744172668
##########
superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx:
##########
@@ -243,10 +243,12 @@ function createAxisControl(axis: 'x' | 'y'): ControlSetRow[] {
name: 'truncateYAxis',
config: {
type: 'CheckboxControl',
- label: t('Truncate Axis'),
+ label: t('Truncate Y Axis'),
default: truncateYAxis,
renderTrigger: true,
- description: t('It’s not recommended to truncate axis in Bar chart.'),
+ description: t(
+ 'It’s not recommended to truncate Y axis in Bar chart.',
+ ),
Review Comment:
**Suggestion:** The description uses a typographic (curly) apostrophe ('). Translation keys are the raw strings passed to `t(...)`, so using a different apostrophe character will produce a different translation key than the ASCII version and likely break existing translations; replace the curly apostrophe with a plain ASCII apostrophe and normalize casing to match other description strings. [possible bug]
<details>
<summary><b>Severity Level:</b> Major ⚠️</summary>
```mdx
- ❌ Truncate Y Axis description may show untranslated text.
- ⚠️ Translation key mismatch across deployed locales.
- ⚠️ Inconsistent user-facing label strings in UI.
```
</details>
```suggestion
description: t("It's not recommended to truncate Y axis in bar chart."),
```
<details>
<summary><b>Steps of Reproduction ✅ </b></summary>
```mdx
1. Open the file
superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx
and inspect the Truncate Y axis control description at lines 249-251. The code calls
t(...) with the text string used as the translation key.
2. The translation function t(...) is implemented at
packages/superset-core/src/ui/translation/TranslatorSingleton.ts:66-68 (function t(input:
string, ...args: unknown[]) { return getInstance().translate(input, ...args); }). The
exact characters of the input string determine the lookup key.
3. If the deployed translations include an entry for the ASCII-apostrophe key "It's not
recommended to truncate Y axis in Bar chart." but the code uses a curly apostrophe variant
(as seen in the final file), the translator will not find the ASCII key and will fall back
to the raw input string or English, causing a missing/incorrect translation in the UI.
4. To observe: build/run the app, open the Bar chart control panel (Chart Options → Y Axis
→ Truncate Y Axis) and compare the displayed description against the expected localized
string. The mismatch will reproduce the missing translation because
TranslatorSingleton.translate() will not match the ASCII key.
```
</details>
<details>
<summary><b>Prompt for AI Agent 🤖 </b></summary>
```mdx
This is a comment left during a code review.
**Path:** superset-frontend/plugins/plugin-chart-echarts/src/Timeseries/Regular/Bar/controlPanel.tsx
**Line:** 249:251
**Comment:**
*Possible Bug: The description uses a typographic (curly) apostrophe ('). Translation keys are the raw strings passed to `t(...)`, so using a different apostrophe character will produce a different translation key than the ASCII version and likely break existing translations; replace the curly apostrophe with a plain ASCII apostrophe and normalize casing to match other description strings.
Validate the correctness of the flagged issue. If correct, How can I resolve this? If you propose a fix, implement it and please make it concise.
```
</details>
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "bito-code-review[bot] (via GitHub)" <gi...@apache.org>.
bito-code-review[bot] commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3821367598
AI Code Review is in progress (usually takes 3 to 15 minutes unless it's a very large PR).
<details>
<summary>
Bito Usage Guide
</summary>
**Commands**
Type the following command in the pull request comment and save the comment.
- `/review` - Manually triggers a full AI review.
- `/pause` - Pauses automatic reviews on this pull request.
- `/resume` - Resumes automatic reviews.
- `/resolve` - Marks all Bito-posted review comments as resolved.
- `/abort` - Cancels all in-progress reviews.
Refer to the <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent/available-commands" target="_blank" rel="noopener noreferrer">documentation</a> for additional commands.
**Configuration**
This repository uses `Superset` You can customize the agent settings <a href="https://alpha.bito.ai/home/ai-agents/code-review-agent" target="_blank" rel="noopener noreferrer">here</a> or contact your Bito workspace admin at evan@preset.io.
**Documentation & Help**
- <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent/getting-started/install-run-using-bito-cloud/create-or-customize-an-agent-instance" target="_blank" rel="noopener noreferrer">Customize agent settings</a>
- <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent/implementing-custom-code-review-rules" target="_blank" rel="noopener noreferrer">Review rules</a>
- <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent" target="_blank" rel="noopener noreferrer">General documentation</a>
- <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent/faqs" target="_blank" rel="noopener noreferrer">FAQ</a>
</details>
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "bito-code-review[bot] (via GitHub)" <gi...@apache.org>.
bito-code-review[bot] commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3822606167
AI Code Review is in progress (usually takes 3 to 15 minutes unless it's a very large PR).
<details>
<summary>
Bito Usage Guide
</summary>
**Commands**
Type the following command in the pull request comment and save the comment.
- `/review` - Manually triggers a full AI review.
- `/pause` - Pauses automatic reviews on this pull request.
- `/resume` - Resumes automatic reviews.
- `/resolve` - Marks all Bito-posted review comments as resolved.
- `/abort` - Cancels all in-progress reviews.
Refer to the <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent/available-commands" target="_blank" rel="noopener noreferrer">documentation</a> for additional commands.
**Configuration**
This repository uses `Superset` You can customize the agent settings <a href="https://alpha.bito.ai/home/ai-agents/code-review-agent" target="_blank" rel="noopener noreferrer">here</a> or contact your Bito workspace admin at evan@preset.io.
**Documentation & Help**
- <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent/getting-started/install-run-using-bito-cloud/create-or-customize-an-agent-instance" target="_blank" rel="noopener noreferrer">Customize agent settings</a>
- <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent/implementing-custom-code-review-rules" target="_blank" rel="noopener noreferrer">Review rules</a>
- <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent" target="_blank" rel="noopener noreferrer">General documentation</a>
- <a href="https://docs.bito.ai/bito-dev-agents/ai-code-review-agent/faqs" target="_blank" rel="noopener noreferrer">FAQ</a>
</details>
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org
Re: [PR] fix: Rename Truncate Axis to Truncate Y Axis in bar chart controls [superset]
Posted by "netlify[bot] (via GitHub)" <gi...@apache.org>.
netlify[bot] commented on PR #37403:
URL: https://github.com/apache/superset/pull/37403#issuecomment-3791963547
### <span aria-hidden="true">✅</span> Deploy Preview for *superset-docs-preview* ready!
| Name | Link |
|:-:|------------------------|
|<span aria-hidden="true">🔨</span> Latest commit | 75b981126e7917f791ae8e5b04bc5046320a4cdb |
|<span aria-hidden="true">🔍</span> Latest deploy log | https://app.netlify.com/projects/superset-docs-preview/deploys/6973c49ec49113000700f99b |
|<span aria-hidden="true">😎</span> Deploy Preview | [https://deploy-preview-37403--superset-docs-preview.netlify.app](https://deploy-preview-37403--superset-docs-preview.netlify.app) |
|<span aria-hidden="true">📱</span> Preview on mobile | <details><summary> Toggle QR Code... </summary><br /><br /><br /><br />_Use your smartphone camera to open QR code link._</details> |
---
<!-- [superset-docs-preview Preview](https://deploy-preview-37403--superset-docs-preview.netlify.app) -->
_To edit notification comments on pull requests, go to your [Netlify project configuration](https://app.netlify.com/projects/superset-docs-preview/configuration/notifications#deploy-notifications)._
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: notifications-unsubscribe@superset.apache.org
For additional commands, e-mail: notifications-help@superset.apache.org