You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@flex.apache.org by Justin Mclean <ju...@classsoftware.com> on 2013/03/12 00:49:23 UTC
[DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
Discussion thread for Apache Flex SDK installer 2.5 RC1.
Post any queries, issues, etc etc here rather than in the [VOTE] thread.
Thanks,
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
Actualy I like it, if it fits, I'll take it.
-Fred
-----Message d'origine-----
From: Nicholas Kwiatkowski
Sent: Wednesday, March 13, 2013 10:12 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
How about "Anonymous usage statistics will be collected in accordance with
our privacy policy" and have it link to the privacy policy we have on our
website.
-Nick
On Wed, Mar 13, 2013 at 3:07 PM, Frédéric THOMAS
<we...@hotmail.com>wrote:
> Evertthing on this list [1] has been resolved or found consensus, except
> for:
>
>
> - "Install Log" and "Close" buttons are grey, while they do have a
> rollover someone may think they are disabled.
>
> Does someone with better design skill than me could suggest something ?
> otherwise I will let it like.
>
>
> - Can we change "Information about use of this application is being
> collected via HTTP requests" to something like "Anonymous/non identifying
> information is collected to improve the quality of this installer"
>
> If everybody is ok, I'll choose "This application will ping a server in
> order to count the number of times the application is run."
>
> -Fred
>
> [1]
>
> Some possible room for minor (some very minor) improvements:
> - By default 11.1 and 11.4 player globals were downloaded, as they are
> reasonably small why not download them all?
> - "Install Log" and "Close" buttons are grey, while they do have a
> rollover someone may think they are disabled.
> - "Information about use of this application is being collected via HTTP
> requests" sounds rather scary, there no was to opt out and there no
> indication to what information is being collected or why it's being
> collected. Think we need a link to short paragraph saying what is
> collected
> and why.
> - Can we change "Information about use of this application is being
> collected via HTTP requests" to something like "Anonymous/non identifying
> information is collected to improve the quality of this installer"
> - Highlight in language drop down is cut off and doesn't extend to RHS of
> drop down.
> - "Information about use of this application is being collected via HTTP
> requests" locale missing in Spanish, Greek and Portuguese.
> - Locale for "Log" button in Portuguese missing
> - Looks like the Greek locale has issues - perhaps text not checked in as
> UTF8? Black diamonds with "?" show up in text.
>
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC3 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC2)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Hi,
As a reminder, there's an installer which is waiting for your votes.
-Fred
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC3)
Posted by Frédéric THOMAS <we...@hotmail.com>.
I just extracted the sources of the installer, ran Ant and the build was ok,
so, I don't know but that's twice that people reports an issue with the
flexTasks.tasks, did you tried to copy the one the the SDK 4.9.1 to Ant ?
-Fred
-----Message d'origine-----
From: Mark Kessler
Sent: Monday, April 01, 2013 1:44 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC3)
Frédéric,
Here are my version numbers each. I have the environmental variables
setup and the path setup. I just recompiled the flex-sdk to make sure
everything else was working as intended.
ANT: 1.9.0
AIR: 3.4
Flex: current git build of develop (compiled successfully)
Do you think it's the ant location it's having a hard time with?
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC3)
Posted by Frédéric THOMAS <we...@hotmail.com>.
ok :)
-Fred
-----Message d'origine-----
From: Mark Kessler
Sent: Monday, April 01, 2013 1:50 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC3)
Ugh never mind when I removed my old build of the Flex-SDK and rebuilt the
new one... The Flex-Installer built correctly.
BUILD SUCCESSFUL
Total time: 21 seconds
Thanks though. I appreciate the help
-Mark
On Sun, Mar 31, 2013 at 7:44 PM, Mark Kessler
<ke...@gmail.com>wrote:
> Frédéric,
> Here are my version numbers each. I have the environmental variables
> setup and the path setup. I just recompiled the flex-sdk to make sure
> everything else was working as intended.
>
> ANT: 1.9.0
> AIR: 3.4
> Flex: current git build of develop (compiled successfully)
>
> Do you think it's the ant location it's having a hard time with?
>
>
>
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
Made a few minor changes to the README and RELEASE_NOTES (few minor issue with SVN vs Git URLs and version numbers). Not essential IMO that they are in this release.
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC3)
Posted by Mark Kessler <ke...@gmail.com>.
Well I have a clean ant download in separate folder than the flex-sdk. I
have it use the "ANT_HOME" and path "%ANT_HOME%\bin" variables to access
it. My problem seemed to be that my flexTasks.jar file disappeared from my
/flex/lib folder. When I rebuilt the Flex-SDK it re-created it and I was
good again. Hope a script isn't cleaning that folder up.
On Sun, Mar 31, 2013 at 8:05 PM, Justin Mclean <ju...@classsoftware.com>wrote:
> Hi,
>
> > Ugh never mind when I removed my old build of the Flex-SDK and rebuilt
> the
> > new one... The Flex-Installer built correctly.
> I ran into a very similar issue the other day as did someone else. So
> there's something going with o wit looks up ant/lib or lib to find that
> file not 100% what it is however.
>
> Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC3)
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> Ugh never mind when I removed my old build of the Flex-SDK and rebuilt the
> new one... The Flex-Installer built correctly.
I ran into a very similar issue the other day as did someone else. So there's something going with o wit looks up ant/lib or lib to find that file not 100% what it is however.
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC3)
Posted by Mark Kessler <ke...@gmail.com>.
Ugh never mind when I removed my old build of the Flex-SDK and rebuilt the
new one... The Flex-Installer built correctly.
BUILD SUCCESSFUL
Total time: 21 seconds
Thanks though. I appreciate the help
-Mark
On Sun, Mar 31, 2013 at 7:44 PM, Mark Kessler
<ke...@gmail.com>wrote:
> Frédéric,
> Here are my version numbers each. I have the environmental variables
> setup and the path setup. I just recompiled the flex-sdk to make sure
> everything else was working as intended.
>
> ANT: 1.9.0
> AIR: 3.4
> Flex: current git build of develop (compiled successfully)
>
> Do you think it's the ant location it's having a hard time with?
>
>
>
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC3)
Posted by Mark Kessler <ke...@gmail.com>.
Frédéric,
Here are my version numbers each. I have the environmental variables
setup and the path setup. I just recompiled the flex-sdk to make sure
everything else was working as intended.
ANT: 1.9.0
AIR: 3.4
Flex: current git build of develop (compiled successfully)
Do you think it's the ant location it's having a hard time with?
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC3)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Justin,
Did you update ? I fixed it and pushed it yesterday, look at my rat.report
[1].
Thanks,
-Fred
[1]
*****************************************************
Summary
-------
Generated at: 2013-03-29T16:11:38+01:00
Notes: 4
Binaries: 0
Archives: 0
Standards: 53
Apache Licensed: 53
Generated Documents: 0
JavaDocs are generated and so license header is optional
Generated files do not required license headers
0 Unknown Licenses
*******************************
Unapproved licenses:
*******************************
Archives:
*****************************************************
Files with Apache License headers will be marked AL
Binary files (which do not require AL headers) will be marked B
Compressed archives will be marked A
Notices, licenses etc will be marked N
N U:/sources/asf/flex/utilities/installer/release/temp/LICENSE
N U:/sources/asf/flex/utilities/installer/release/temp/NOTICE
N U:/sources/asf/flex/utilities/installer/release/temp/README
AL U:/sources/asf/flex/utilities/installer/release/temp/RELEASE_GUIDE
N U:/sources/asf/flex/utilities/installer/release/temp/RELEASE_NOTES
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/assets/styles/ApacheFlexToolsStyle.css
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/org/apache/flex/utilities/common/Constants.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/org/apache/flex/utilities/common/InternetUtil.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/org/apache/flex/utilities/common/MirrorURLUtil.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/org/apache/flex/utilities/common/Tools.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/org/apache/flex/utilities/common/controls/LinkButton.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/org/apache/flex/utilities/common/interfaces/ILog.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/org/apache/flex/utilities/common/vo/LogMessagesVO.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/common/src/ws/tink/spark/skins/controls/ButtonSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/build.properties
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/build.xml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/sign_and_hash.sh
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/InstallApacheFlex-app.xml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/InstallApacheFlex.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/assets/styles/InstallApacheFlexStyle.css
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/com/riaspace/nativeApplicationUpdater/NativeApplicationUpdater.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/com/riaspace/nativeApplicationUpdater/UpdaterErrorCodes.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/com/riaspace/nativeApplicationUpdater/utils/HdiutilHelper.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/model/InstallerComponentVO.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/resource/RuntimeLocale.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/resource/ViewResourceConstants.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/util/DownloadUtil.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/util/MD5CompareUtil.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/UpdaterDialog.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/components/AboutDialog.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/components/AdobeLicense.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/components/ConsoleWindow.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/components/MPLLicense.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/components/Tracker.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/controls/MultiStepProgressIndicator.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/events/InstallItemSelectionEvent.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/org/apache/flex/packageflexsdk/view/itemrenderers/OptionalInstallItemRenderer.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/sdk-installer-config-2.0.xml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/sdk-installer-config.xml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/controls/ActivityIndicator.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/controls/IAnimator.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/controls/PercentLayout.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/controls/ProgressBar.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/controls/Rotator.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/controls/StepItem.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/controls/StepRenderer.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/controls/StepRendererBase.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/layouts/EllipseLayout.as
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/ActivityIndicatorSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/ColorCheckBoxSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/InstallApacheFlexSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/ProgressBarSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/RotatorSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/StepActivityIndicatorSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/StepRotatorSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/TextInputSkin.mxml
AL
U:/sources/asf/flex/utilities/installer/release/temp/installer/src/ws/tink/spark/skins/controls/UpdaterDialogSkin.mxml
*****************************************************
Printing headers for files without AL header...
-----Message d'origine-----
From: Justin Mclean
Sent: Friday, March 29, 2013 11:27 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC3)
HI,
> Can you please build RC4 before I go for a vote, I just committed the
> sources and the release files ?
Think this needs a minor change before calling for a new RC.
installer/src/org/apache/flex/packageflexsdk/view/components/Tracker.mxml
is missing an apache header.
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Oups, yes I've been confuse with the language, nothing to fix :P
-Fred
-----Message d'origine-----
From: Erik de Bruin
Sent: Thursday, March 14, 2013 4:50 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
It's right there in the list: "Nederlands." You may be confused with
"Dutch", which is how English speakers refer to our language and
people living here (the Dutch).
You are Windows, right? Hello, I'm a Mac ;-)
EdB
On Thu, Mar 14, 2013 at 4:41 PM, Frédéric THOMAS
<we...@hotmail.com> wrote:
> Well, I can't figure out why it works for me an not for you :P
>
> Btw, I'm confuse now, how do you write the name of the Nederland's
> language
> in that language ? :)
>
> -Fred
>
> -----Message d'origine----- From: Erik de Bruin
> Sent: Thursday, March 14, 2013 3:27 PM
>
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
> Apache Flex SDK Installer 2.5 RC1)
>
>> Humm.. are you telling me you're Deutch but your OS is en_US based ?
>> Weird, because the default behavior of the Installer regarding locales is
>> to
>> detect your OS locale 1rst and then fallback in en_US if none of the
>> existing ones is found and it looks it found Deutch :P
>> Note: I've got an French OS and it works to me, I don't know what to say
>> if
>> you're right.
>
>
> No, apart from a typo (Deutsch instead of Deutsh) in my email, the
> situation as I described it correct. My setup is that - although I'm
> from Nederland (Pays Bas) - I have bought my MacBook in the US and so
> it's OS is full en_US. The installer didn't pick up on that and
> instead showed me the first item (index 0 I guess) in the combobox.
> "Deutsch" is native for German (Allemand), which would not even be
> correct if it somehow guessed I wasn't from nl_NL ;-)
>
> EdB
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC3 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC2)
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> Can you please build and commit the RC3 ?
Yep. I assume you used 2.5.2 a the version number?
Thanks,
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC3 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC2)
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> Can you please build and commit the RC3 ?
Done and checked in. You can release the hounds/start the vote :-)
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC3)
Posted by Justin Mclean <ju...@classsoftware.com>.
HI,
> Can you please build RC4 before I go for a vote, I just committed the sources and the release files ?
Think this needs a minor change before calling for a new RC.
installer/src/org/apache/flex/packageflexsdk/view/components/Tracker.mxml
is missing an apache header.
Justin
[DISCUSS] Apache Flex SDK Installer 2.5 RC4 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC3)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Hi Justin,
Can you please build RC4 before I go for a vote, I just committed the
sources and the release files ?
Thanks,
-Fred
[DISCUSS] Apache Flex SDK Installer 2.5 RC3 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC2)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Hi Justin,
Can you please build and commit the RC3 ?
Thanks,
-Fred
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Forget about that :P I'm tired xD
-----Message d'origine-----
From: Frédéric THOMAS
Sent: Thursday, March 14, 2013 5:30 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
Erik,
I wonder, which browser/flash plugin version are you running ?
-Fred
-----Message d'origine-----
From: Frédéric THOMAS
Sent: Thursday, March 14, 2013 4:56 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
Thanks, I'm going to fix the label.
Yes, I thought about a Mac issue (I'm on windows) but as I suppose Justin is
building the same code as mine, I can't figure out how it can happen.
-Fred
-----Message d'origine-----
From: Erik de Bruin
Sent: Thursday, March 14, 2013 4:50 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
It's right there in the list: "Nederlands." You may be confused with
"Dutch", which is how English speakers refer to our language and
people living here (the Dutch).
You are Windows, right? Hello, I'm a Mac ;-)
EdB
On Thu, Mar 14, 2013 at 4:41 PM, Frédéric THOMAS
<we...@hotmail.com> wrote:
> Well, I can't figure out why it works for me an not for you :P
>
> Btw, I'm confuse now, how do you write the name of the Nederland's
> language
> in that language ? :)
>
> -Fred
>
> -----Message d'origine----- From: Erik de Bruin
> Sent: Thursday, March 14, 2013 3:27 PM
>
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
> Apache Flex SDK Installer 2.5 RC1)
>
>> Humm.. are you telling me you're Deutch but your OS is en_US based ?
>> Weird, because the default behavior of the Installer regarding locales is
>> to
>> detect your OS locale 1rst and then fallback in en_US if none of the
>> existing ones is found and it looks it found Deutch :P
>> Note: I've got an French OS and it works to me, I don't know what to say
>> if
>> you're right.
>
>
> No, apart from a typo (Deutsch instead of Deutsh) in my email, the
> situation as I described it correct. My setup is that - although I'm
> from Nederland (Pays Bas) - I have bought my MacBook in the US and so
> it's OS is full en_US. The installer didn't pick up on that and
> instead showed me the first item (index 0 I guess) in the combobox.
> "Deutsch" is native for German (Allemand), which would not even be
> correct if it somehow guessed I wasn't from nl_NL ;-)
>
> EdB
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
Posted by Erik de Bruin <er...@ixsoftware.nl>.
11.6.602.171
EdB
On Thu, Mar 14, 2013 at 5:30 PM, Frédéric THOMAS
<we...@hotmail.com> wrote:
> Erik,
>
> I wonder, which browser/flash plugin version are you running ?
>
> -Fred
>
> -----Message d'origine----- From: Frédéric THOMAS
> Sent: Thursday, March 14, 2013 4:56 PM
>
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
> Apache Flex SDK Installer 2.5 RC1)
>
> Thanks, I'm going to fix the label.
>
> Yes, I thought about a Mac issue (I'm on windows) but as I suppose Justin is
> building the same code as mine, I can't figure out how it can happen.
>
> -Fred
>
> -----Message d'origine----- From: Erik de Bruin
> Sent: Thursday, March 14, 2013 4:50 PM
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
> Apache Flex SDK Installer 2.5 RC1)
>
> It's right there in the list: "Nederlands." You may be confused with
> "Dutch", which is how English speakers refer to our language and
> people living here (the Dutch).
>
> You are Windows, right? Hello, I'm a Mac ;-)
>
> EdB
>
>
>
> On Thu, Mar 14, 2013 at 4:41 PM, Frédéric THOMAS
> <we...@hotmail.com> wrote:
>>
>> Well, I can't figure out why it works for me an not for you :P
>>
>> Btw, I'm confuse now, how do you write the name of the Nederland's
>> language
>> in that language ? :)
>>
>> -Fred
>>
>> -----Message d'origine----- From: Erik de Bruin
>> Sent: Thursday, March 14, 2013 3:27 PM
>>
>> To: dev@flex.apache.org
>> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
>> Apache Flex SDK Installer 2.5 RC1)
>>
>>> Humm.. are you telling me you're Deutch but your OS is en_US based ?
>>> Weird, because the default behavior of the Installer regarding locales is
>>> to
>>> detect your OS locale 1rst and then fallback in en_US if none of the
>>> existing ones is found and it looks it found Deutch :P
>>> Note: I've got an French OS and it works to me, I don't know what to say
>>> if
>>> you're right.
>>
>>
>>
>> No, apart from a typo (Deutsch instead of Deutsh) in my email, the
>> situation as I described it correct. My setup is that - although I'm
>> from Nederland (Pays Bas) - I have bought my MacBook in the US and so
>> it's OS is full en_US. The installer didn't pick up on that and
>> instead showed me the first item (index 0 I guess) in the combobox.
>> "Deutsch" is native for German (Allemand), which would not even be
>> correct if it somehow guessed I wasn't from nl_NL ;-)
>>
>> EdB
>>
>>
>>
>> --
>> Ix Multimedia Software
>>
>> Jan Luykenstraat 27
>> 3521 VB Utrecht
>>
>> T. 06-51952295
>> I. www.ixsoftware.nl
>
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
>
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Erik,
I wonder, which browser/flash plugin version are you running ?
-Fred
-----Message d'origine-----
From: Frédéric THOMAS
Sent: Thursday, March 14, 2013 4:56 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
Thanks, I'm going to fix the label.
Yes, I thought about a Mac issue (I'm on windows) but as I suppose Justin is
building the same code as mine, I can't figure out how it can happen.
-Fred
-----Message d'origine-----
From: Erik de Bruin
Sent: Thursday, March 14, 2013 4:50 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
It's right there in the list: "Nederlands." You may be confused with
"Dutch", which is how English speakers refer to our language and
people living here (the Dutch).
You are Windows, right? Hello, I'm a Mac ;-)
EdB
On Thu, Mar 14, 2013 at 4:41 PM, Frédéric THOMAS
<we...@hotmail.com> wrote:
> Well, I can't figure out why it works for me an not for you :P
>
> Btw, I'm confuse now, how do you write the name of the Nederland's
> language
> in that language ? :)
>
> -Fred
>
> -----Message d'origine----- From: Erik de Bruin
> Sent: Thursday, March 14, 2013 3:27 PM
>
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
> Apache Flex SDK Installer 2.5 RC1)
>
>> Humm.. are you telling me you're Deutch but your OS is en_US based ?
>> Weird, because the default behavior of the Installer regarding locales is
>> to
>> detect your OS locale 1rst and then fallback in en_US if none of the
>> existing ones is found and it looks it found Deutch :P
>> Note: I've got an French OS and it works to me, I don't know what to say
>> if
>> you're right.
>
>
> No, apart from a typo (Deutsch instead of Deutsh) in my email, the
> situation as I described it correct. My setup is that - although I'm
> from Nederland (Pays Bas) - I have bought my MacBook in the US and so
> it's OS is full en_US. The installer didn't pick up on that and
> instead showed me the first item (index 0 I guess) in the combobox.
> "Deutsch" is native for German (Allemand), which would not even be
> correct if it somehow guessed I wasn't from nl_NL ;-)
>
> EdB
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Thanks, I'm going to fix the label.
Yes, I thought about a Mac issue (I'm on windows) but as I suppose Justin is
building the same code as mine, I can't figure out how it can happen.
-Fred
-----Message d'origine-----
From: Erik de Bruin
Sent: Thursday, March 14, 2013 4:50 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
It's right there in the list: "Nederlands." You may be confused with
"Dutch", which is how English speakers refer to our language and
people living here (the Dutch).
You are Windows, right? Hello, I'm a Mac ;-)
EdB
On Thu, Mar 14, 2013 at 4:41 PM, Frédéric THOMAS
<we...@hotmail.com> wrote:
> Well, I can't figure out why it works for me an not for you :P
>
> Btw, I'm confuse now, how do you write the name of the Nederland's
> language
> in that language ? :)
>
> -Fred
>
> -----Message d'origine----- From: Erik de Bruin
> Sent: Thursday, March 14, 2013 3:27 PM
>
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
> Apache Flex SDK Installer 2.5 RC1)
>
>> Humm.. are you telling me you're Deutch but your OS is en_US based ?
>> Weird, because the default behavior of the Installer regarding locales is
>> to
>> detect your OS locale 1rst and then fallback in en_US if none of the
>> existing ones is found and it looks it found Deutch :P
>> Note: I've got an French OS and it works to me, I don't know what to say
>> if
>> you're right.
>
>
> No, apart from a typo (Deutsch instead of Deutsh) in my email, the
> situation as I described it correct. My setup is that - although I'm
> from Nederland (Pays Bas) - I have bought my MacBook in the US and so
> it's OS is full en_US. The installer didn't pick up on that and
> instead showed me the first item (index 0 I guess) in the combobox.
> "Deutsch" is native for German (Allemand), which would not even be
> correct if it somehow guessed I wasn't from nl_NL ;-)
>
> EdB
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
Posted by Erik de Bruin <er...@ixsoftware.nl>.
It's right there in the list: "Nederlands." You may be confused with
"Dutch", which is how English speakers refer to our language and
people living here (the Dutch).
You are Windows, right? Hello, I'm a Mac ;-)
EdB
On Thu, Mar 14, 2013 at 4:41 PM, Frédéric THOMAS
<we...@hotmail.com> wrote:
> Well, I can't figure out why it works for me an not for you :P
>
> Btw, I'm confuse now, how do you write the name of the Nederland's language
> in that language ? :)
>
> -Fred
>
> -----Message d'origine----- From: Erik de Bruin
> Sent: Thursday, March 14, 2013 3:27 PM
>
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
> Apache Flex SDK Installer 2.5 RC1)
>
>> Humm.. are you telling me you're Deutch but your OS is en_US based ?
>> Weird, because the default behavior of the Installer regarding locales is
>> to
>> detect your OS locale 1rst and then fallback in en_US if none of the
>> existing ones is found and it looks it found Deutch :P
>> Note: I've got an French OS and it works to me, I don't know what to say
>> if
>> you're right.
>
>
> No, apart from a typo (Deutsch instead of Deutsh) in my email, the
> situation as I described it correct. My setup is that - although I'm
> from Nederland (Pays Bas) - I have bought my MacBook in the US and so
> it's OS is full en_US. The installer didn't pick up on that and
> instead showed me the first item (index 0 I guess) in the combobox.
> "Deutsch" is native for German (Allemand), which would not even be
> correct if it somehow guessed I wasn't from nl_NL ;-)
>
> EdB
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Well, I can't figure out why it works for me an not for you :P
Btw, I'm confuse now, how do you write the name of the Nederland's language
in that language ? :)
-Fred
-----Message d'origine-----
From: Erik de Bruin
Sent: Thursday, March 14, 2013 3:27 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
> Humm.. are you telling me you're Deutch but your OS is en_US based ?
> Weird, because the default behavior of the Installer regarding locales is
> to
> detect your OS locale 1rst and then fallback in en_US if none of the
> existing ones is found and it looks it found Deutch :P
> Note: I've got an French OS and it works to me, I don't know what to say
> if
> you're right.
No, apart from a typo (Deutsch instead of Deutsh) in my email, the
situation as I described it correct. My setup is that - although I'm
from Nederland (Pays Bas) - I have bought my MacBook in the US and so
it's OS is full en_US. The installer didn't pick up on that and
instead showed me the first item (index 0 I guess) in the combobox.
"Deutsch" is native for German (Allemand), which would not even be
correct if it somehow guessed I wasn't from nl_NL ;-)
EdB
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
Posted by Erik de Bruin <er...@ixsoftware.nl>.
> Humm.. are you telling me you're Deutch but your OS is en_US based ?
> Weird, because the default behavior of the Installer regarding locales is to
> detect your OS locale 1rst and then fallback in en_US if none of the
> existing ones is found and it looks it found Deutch :P
> Note: I've got an French OS and it works to me, I don't know what to say if
> you're right.
No, apart from a typo (Deutsch instead of Deutsh) in my email, the
situation as I described it correct. My setup is that - although I'm
from Nederland (Pays Bas) - I have bought my MacBook in the US and so
it's OS is full en_US. The installer didn't pick up on that and
instead showed me the first item (index 0 I guess) in the combobox.
"Deutsch" is native for German (Allemand), which would not even be
correct if it somehow guessed I wasn't from nl_NL ;-)
EdB
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
> The functionality is flawless, apart from the annoying certificate
issue when installing. This means I had to uninstall and re-install
before it would work. I think this might warrant some investigation,
as a similar (the same?) issue popped up on Twitter. Having a
workaround (uninstall - install) might no longer be sufficient from a
users point of view...
Maybe Om can help with that, I'm building with its certificate, it shouldn't
happen, I'm going to install the last version and try to install this RC
over it to check.
Update: I just installed the 2.0.2, then intalled over the 2.5.0 and it
proposed me to replace the existing one and did it successfully, so, I can't
reproduce.
Can someone else could confirm there's the same behavior Erik had ?
Thanks,
-Fred
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
> The functionality is flawless, apart from the annoying certificate
issue when installing. This means I had to uninstall and re-install
before it would work. I think this might warrant some investigation,
as a similar (the same?) issue popped up on Twitter. Having a
workaround (uninstall - install) might no longer be sufficient from a
users point of view...
Maybe Om can help with that, I'm building with its certificate, it shouldn't
happen, I'm going to install the last version and try to install this RC
over it to check.
> The other issue I found (mostly cosmetic, but still) is that the combo
box with the language selection doesn't initially show the language
that is used (English (US) in my case), but the first item in the list
(Deutch).
Humm.. are you telling me you're Deutch but your OS is en_US based ?
Weird, because the default behavior of the Installer regarding locales is to
detect your OS locale 1rst and then fallback in en_US if none of the
existing ones is found and it looks it found Deutch :P
Note: I've got an French OS and it works to me, I don't know what to say if
you're right.
>Also, you can use this line for the nl_NL localisation of the stats
collection disclaimer:
>"Anonieme gebruiksgegevens worden bijgehouden in overeenstemming met
ons privacybeleid"
Done ! thanks ;-)
-Fred
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Cheers.
-----Message d'origine-----
From: Justin Mclean
Sent: Thursday, March 14, 2013 10:04 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS]
Apache Flex SDK Installer 2.5 RC1)
HI,
> So, it's up to you to build a RC2 for OSX.
Build and checked in. In the middle of a conference so didn't have time to
fully test.
Thanks,
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Justin Mclean <ju...@classsoftware.com>.
HI,
> So, it's up to you to build a RC2 for OSX.
Build and checked in. In the middle of a conference so didn't have time to fully test.
Thanks,
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Justin,
So, it's up to you to build a RC2 for OSX.
Thanks,
-Fred
-----Message d'origine-----
From: Frédéric THOMAS
Sent: Thursday, March 14, 2013 8:54 AM
To: dev@flex.apache.org
Subject: [DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache
Flex SDK Installer 2.5 RC1)
Hi,
I changed my mind, I prefer to publish a release now (to let folks check and
vote), even though I have to build another one later if there are some
issues rather than waiting for folks to provide their own translation of the
INFO_TRACKING, if some translations come in between, I'll build another
release as well.
-Fred
-----Message d'origine-----
From: Frédéric THOMAS
Sent: Thursday, March 14, 2013 12:55 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
I just apply the change for INFO_TRACKING to "Anonymous usage statistics
will be collected in accordance with our privacy policy" and point to the
privacy policy url "http://flex.apache.org/about-privacy.html".
It's translated for English and French, for other languages, it would be
nice if people can add and do the translations for their own language.
I'll do a RC tomorrow afternoon GMT+1.
Thanks,
-Fred
-----Message d'origine-----
From: Justin Mclean
Sent: Wednesday, March 13, 2013 11:21 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
> How about "Anonymous usage statistics will be collected in accordance with
> our privacy policy" and have it link to the privacy policy we have on our
> website.
+1 to this
Justin
[DISCUSS] Apache Flex SDK Installer 2.5 RC2 (was: [DISCUSS] Apache Flex SDK Installer 2.5 RC1)
Posted by Frédéric THOMAS <we...@hotmail.com>.
Hi,
I changed my mind, I prefer to publish a release now (to let folks check and
vote), even though I have to build another one later if there are some
issues rather than waiting for folks to provide their own translation of the
INFO_TRACKING, if some translations come in between, I'll build another
release as well.
-Fred
-----Message d'origine-----
From: Frédéric THOMAS
Sent: Thursday, March 14, 2013 12:55 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
I just apply the change for INFO_TRACKING to "Anonymous usage statistics
will be collected in accordance with our privacy policy" and point to the
privacy policy url "http://flex.apache.org/about-privacy.html".
It's translated for English and French, for other languages, it would be
nice if people can add and do the translations for their own language.
I'll do a RC tomorrow afternoon GMT+1.
Thanks,
-Fred
-----Message d'origine-----
From: Justin Mclean
Sent: Wednesday, March 13, 2013 11:21 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
> How about "Anonymous usage statistics will be collected in accordance with
> our privacy policy" and have it link to the privacy policy we have on our
> website.
+1 to this
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Om <bi...@gmail.com>.
On Mar 13, 2013 6:06 PM, "Justin Mclean" <ju...@classsoftware.com> wrote:
>
> Hi,
>
> Installer error in the wild:
> https://twitter.com/Yavstr/status/311837235068694528/photo/1
>
> Someone want to reach out?
>
> Justin
Done!
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
Installer error in the wild:
https://twitter.com/Yavstr/status/311837235068694528/photo/1
Someone want to reach out?
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
Hi,
I just apply the change for INFO_TRACKING to "Anonymous usage statistics
will be collected in accordance with our privacy policy" and point to the
privacy policy url "http://flex.apache.org/about-privacy.html".
It's translated for English and French, for other languages, it would be
nice if people can add and do the translations for their own language.
I'll do a RC tomorrow afternoon GMT+1.
Thanks,
-Fred
-----Message d'origine-----
From: Justin Mclean
Sent: Wednesday, March 13, 2013 11:21 PM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
> How about "Anonymous usage statistics will be collected in accordance with
> our privacy policy" and have it link to the privacy policy we have on our
> website.
+1 to this
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> How about "Anonymous usage statistics will be collected in accordance with
> our privacy policy" and have it link to the privacy policy we have on our
> website.
+1 to this
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Nicholas Kwiatkowski <ni...@spoon.as>.
How about "Anonymous usage statistics will be collected in accordance with
our privacy policy" and have it link to the privacy policy we have on our
website.
-Nick
On Wed, Mar 13, 2013 at 3:07 PM, Frédéric THOMAS <we...@hotmail.com>wrote:
> Evertthing on this list [1] has been resolved or found consensus, except
> for:
>
>
> - "Install Log" and "Close" buttons are grey, while they do have a
> rollover someone may think they are disabled.
>
> Does someone with better design skill than me could suggest something ?
> otherwise I will let it like.
>
>
> - Can we change "Information about use of this application is being
> collected via HTTP requests" to something like "Anonymous/non identifying
> information is collected to improve the quality of this installer"
>
> If everybody is ok, I'll choose "This application will ping a server in
> order to count the number of times the application is run."
>
> -Fred
>
> [1]
>
> Some possible room for minor (some very minor) improvements:
> - By default 11.1 and 11.4 player globals were downloaded, as they are
> reasonably small why not download them all?
> - "Install Log" and "Close" buttons are grey, while they do have a
> rollover someone may think they are disabled.
> - "Information about use of this application is being collected via HTTP
> requests" sounds rather scary, there no was to opt out and there no
> indication to what information is being collected or why it's being
> collected. Think we need a link to short paragraph saying what is collected
> and why.
> - Can we change "Information about use of this application is being
> collected via HTTP requests" to something like "Anonymous/non identifying
> information is collected to improve the quality of this installer"
> - Highlight in language drop down is cut off and doesn't extend to RHS of
> drop down.
> - "Information about use of this application is being collected via HTTP
> requests" locale missing in Spanish, Greek and Portuguese.
> - Locale for "Log" button in Portuguese missing
> - Looks like the Greek locale has issues - perhaps text not checked in as
> UTF8? Black diamonds with "?" show up in text.
>
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
Evertthing on this list [1] has been resolved or found consensus, except
for:
- "Install Log" and "Close" buttons are grey, while they do have a rollover
someone may think they are disabled.
Does someone with better design skill than me could suggest something ?
otherwise I will let it like.
- Can we change "Information about use of this application is being
collected via HTTP requests" to something like "Anonymous/non identifying
information is collected to improve the quality of this installer"
If everybody is ok, I'll choose "This application will ping a server in
order to count the number of times the application is run."
-Fred
[1]
Some possible room for minor (some very minor) improvements:
- By default 11.1 and 11.4 player globals were downloaded, as they are
reasonably small why not download them all?
- "Install Log" and "Close" buttons are grey, while they do have a rollover
someone may think they are disabled.
- "Information about use of this application is being collected via HTTP
requests" sounds rather scary, there no was to opt out and there no
indication to what information is being collected or why it's being
collected. Think we need a link to short paragraph saying what is collected
and why.
- Can we change "Information about use of this application is being
collected via HTTP requests" to something like "Anonymous/non identifying
information is collected to improve the quality of this installer"
- Highlight in language drop down is cut off and doesn't extend to RHS of
drop down.
- "Information about use of this application is being collected via HTTP
requests" locale missing in Spanish, Greek and Portuguese.
- Locale for "Log" button in Portuguese missing
- Looks like the Greek locale has issues - perhaps text not checked in as
UTF8? Black diamonds with "?" show up in text.
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
> Some possible room for minor (some very minor) improvements:
> - By default 11.1 and 11.4 player globals were downloaded, as they are
> reasonably small why not download them all?
It was late when I finished last night, I didn't get this question, I was
confused.
Well, Just like that I would say yes, why not, even maybe without another
step, wrapping all the playerglobal downloads in an existing step would work
but what would be the usage, to use one of extra FP (playerglobal), the user
should have to manualy patch its flex-config.xml, out, we've got scripts for
that, as well for FP as for AIR, I would rather prefer the users use the
scripts, most of them anyway don't know anything about flex-config.xml, ok,
it is documented in the readme but once again, who reads it, maybe it is
better to make them to know more about the scripts and there usages and even
at support time on the list, it's simplier to say to the user use this
script to do that than "trick your flex-config", well, that's my opinion.
Btw, does the ide/* scripts documented somewhere ?
Out of that, I'll add, from the next version, the possibility for the user
to choose it's combination FP/AIR, maybe the possibility to choose the SDK
as well.
-Fred
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
- Looks like the Greek locale has issues - perhaps text not checked in as
UTF8? Black diamonds with "?" show up in text.
It comes from the revision 1455123, I corrected it but I can't commit at the
moment: 403
-Fred
-----Message d'origine-----
From: Frédéric THOMAS
Sent: Tuesday, March 12, 2013 1:38 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
- By default 11.1 and 11.4 player globals were downloaded, as they are
reasonably small why not download them all?
Given the defaut AIR version is 3.4, it should be at least FP 11.4 but we
built the sources with 11.1 :P
If we want both, I have to check but I would say, it requires another step.
- "Install Log" and "Close" buttons are grey, while they do have a rollover
someone may think they are disabled.
Ok, someone would like to propose a color ?
- "Information about use of this application is being collected via HTTP
requests" sounds rather scary...to something like "Anonymous/non identifying
information is collected to improve the quality of this installer"
Fine to me.
- Highlight in language drop down is cut off and doesn't extend to RHS of
drop down.
I haven't seen, I check that.
- "Information about use of this application is being collected via HTTP
requests" locale missing in Spanish, Greek and Portuguese.
- Locale for "Log" button in Portuguese missing
It's known but until nobody wants to translate it, I guess it can fall back
in English.
- Looks like the Greek locale has issues - perhaps text not checked in as
UTF8? Black diamonds with "?" show up in text.
I've just seen that, could be because of the very recent change in the font
? I don't know, I'll check.
-Fred
-----Message d'origine-----
From: Justin Mclean
Sent: Tuesday, March 12, 2013 1:19 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
Looks goods and worked without an issue on OSX with an Australian locale.
Some possible room for minor (some very minor) improvements:
- By default 11.1 and 11.4 player globals were downloaded, as they are
reasonably small why not download them all?
- "Install Log" and "Close" buttons are grey, while they do have a rollover
someone may think they are disabled.
- "Information about use of this application is being collected via HTTP
requests" sounds rather scary, there no was to opt out and there no
indication to what information is being collected or why it's being
collected. Think we need a link to short paragraph saying what is collected
and why.
- Can we change "Information about use of this application is being
collected via HTTP requests" to something like "Anonymous/non identifying
information is collected to improve the quality of this installer"
- Highlight in language drop down is cut off and doesn't extend to RHS of
drop down.
- "Information about use of this application is being collected via HTTP
requests" locale missing in Spanish, Greek and Portuguese.
- Locale for "Log" button in Portuguese missing
- Looks like the Greek locale has issues - perhaps text not checked in as
UTF8? Black diamonds with "?" show up in text.
Thanks,
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> As soon we use a layout with requestedRowCount, it happens, I don't know if it is a bug.
I think I may of seen this else where as well, looks like it might be a bug with the spark ComboBox. So probably best to leave as is and raise a JIRA on the ComboBox.
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Om <bi...@gmail.com>.
On Mar 12, 2013 5:53 PM, "Nicholas Kwiatkowski" <ni...@spoon.as> wrote:
>
> A few comments on the installer :
>
> - The disclaimer "Information about your use of this application...."
> should really link to our privacy policy.
> http://flex.apache.org/about-privacy.html
Makes sense. I will add this link.
> - I like the new check-marks for the license agreements. This helps with
> usability a LOT.
> - The app's UI becomes unresponsive during the verification of the MD5
> hash. Any way we can green-thread this so that the end user dosen't think
> something is wrong?
This is next on my list. I am thinking of using AS worker API for this.
>
> Otherwise, functionally, it works fine. Both Windows 7 x64 and MacOS X
> 10.6 and 10.8
>
> -Nick
>
>
>
> On Tue, Mar 12, 2013 at 7:00 AM, Swen van Zanten <fl...@hdsign.nl> wrote:
>
> > I don't know if it's been noticed before and it's not really a problem
but…
> > The installers are not retina-ready.
> >
> > Just though I mention it.
> >
> > For the rest of it, the installer works great!
> >
> > Swen
> >
> > Op 12 mrt. 2013, om 07:35 heeft Frédéric THOMAS <webdoublefx@hotmail.com
>
> > het volgende geschreven:
> >
> > > Ok, I think I've got it from this tickect
> > https://issues.apache.org/jira/browse/INFRA-5549 [1], so, I'm going to
> > wait everything is ok and writable before I try to loose everything.
> > >
> > > -Fred
> > >
> > > [1]
> > > I've migrated the repos as follows:
> > > https://git-wip-us.apache.org/repos/asf/flex-falcon.git
> > > https://git-wip-us.apache.org/repos/asf/flex-sdk.git
> > > https://git-wip-us.apache.org/repos/asf/flex-tlf.git
> > > https://git-wip-us.apache.org/repos/asf/flex-utilities.git
> > >
> > > I have not migrated whiteboard or site. (site will stay SVN, and be
> > writable after we're finished with this.)
> > > I am open to moving whiteboard, but you'll have to tell me explicitly
> > that you want to move it - otherwise when we are done I'll make both
site
> > and whiteboard writable in SVN.
> > >
> > > The git repos are also read only. Please have the FLEX PMC look at the
> > repos, see if they are acceptable, all branches are present, etc, and if
> > found accordingly, please update this ticket and I'll make them
writable.
> > >
> > > -----Message d'origine----- From: Frédéric THOMAS
> > > Sent: Tuesday, March 12, 2013 7:26 AM
> > > To: dev@flex.apache.org
> > > Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
> > >
> > > Just to be sure, what's the exact address for the develop branch ?
> > >
> > > http://git.apache.org/flex-sdk.git or
http://github.com/apache/flex-sdkor
> > > that the same pointer ?
> > >
> > > -Fred
> > >
> > > -----Message d'origine----- From: Justin Mclean
> > > Sent: Tuesday, March 12, 2013 7:10 AM
> > > To: dev@flex.apache.org
> > > Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
> > >
> > > Hi,
> > >
> > >> Then what's the process to move SCM w/o to loose anything ?
> > >
> > >
> > > Best way I think is to do a full git clone in a new area, create a
patch
> > in
> > > SVN and then reapply that patch to the new git repo just trying that
now.
> > > Anyone have any other ideas?
> > >
> > > Justin
> > >
> >
> >
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Nicholas Kwiatkowski <ni...@spoon.as>.
A few comments on the installer :
- The disclaimer "Information about your use of this application...."
should really link to our privacy policy.
http://flex.apache.org/about-privacy.html
- I like the new check-marks for the license agreements. This helps with
usability a LOT.
- The app's UI becomes unresponsive during the verification of the MD5
hash. Any way we can green-thread this so that the end user dosen't think
something is wrong?
Otherwise, functionally, it works fine. Both Windows 7 x64 and MacOS X
10.6 and 10.8
-Nick
On Tue, Mar 12, 2013 at 7:00 AM, Swen van Zanten <fl...@hdsign.nl> wrote:
> I don't know if it's been noticed before and it's not really a problem but…
> The installers are not retina-ready.
>
> Just though I mention it.
>
> For the rest of it, the installer works great!
>
> Swen
>
> Op 12 mrt. 2013, om 07:35 heeft Frédéric THOMAS <we...@hotmail.com>
> het volgende geschreven:
>
> > Ok, I think I've got it from this tickect
> https://issues.apache.org/jira/browse/INFRA-5549 [1], so, I'm going to
> wait everything is ok and writable before I try to loose everything.
> >
> > -Fred
> >
> > [1]
> > I've migrated the repos as follows:
> > https://git-wip-us.apache.org/repos/asf/flex-falcon.git
> > https://git-wip-us.apache.org/repos/asf/flex-sdk.git
> > https://git-wip-us.apache.org/repos/asf/flex-tlf.git
> > https://git-wip-us.apache.org/repos/asf/flex-utilities.git
> >
> > I have not migrated whiteboard or site. (site will stay SVN, and be
> writable after we're finished with this.)
> > I am open to moving whiteboard, but you'll have to tell me explicitly
> that you want to move it - otherwise when we are done I'll make both site
> and whiteboard writable in SVN.
> >
> > The git repos are also read only. Please have the FLEX PMC look at the
> repos, see if they are acceptable, all branches are present, etc, and if
> found accordingly, please update this ticket and I'll make them writable.
> >
> > -----Message d'origine----- From: Frédéric THOMAS
> > Sent: Tuesday, March 12, 2013 7:26 AM
> > To: dev@flex.apache.org
> > Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
> >
> > Just to be sure, what's the exact address for the develop branch ?
> >
> > http://git.apache.org/flex-sdk.git or http://github.com/apache/flex-sdkor
> > that the same pointer ?
> >
> > -Fred
> >
> > -----Message d'origine----- From: Justin Mclean
> > Sent: Tuesday, March 12, 2013 7:10 AM
> > To: dev@flex.apache.org
> > Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
> >
> > Hi,
> >
> >> Then what's the process to move SCM w/o to loose anything ?
> >
> >
> > Best way I think is to do a full git clone in a new area, create a patch
> in
> > SVN and then reapply that patch to the new git repo just trying that now.
> > Anyone have any other ideas?
> >
> > Justin
> >
>
>
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Swen van Zanten <fl...@hdsign.nl>.
I don't know if it's been noticed before and it's not really a problem but…
The installers are not retina-ready.
Just though I mention it.
For the rest of it, the installer works great!
Swen
Op 12 mrt. 2013, om 07:35 heeft Frédéric THOMAS <we...@hotmail.com> het volgende geschreven:
> Ok, I think I've got it from this tickect https://issues.apache.org/jira/browse/INFRA-5549 [1], so, I'm going to wait everything is ok and writable before I try to loose everything.
>
> -Fred
>
> [1]
> I've migrated the repos as follows:
> https://git-wip-us.apache.org/repos/asf/flex-falcon.git
> https://git-wip-us.apache.org/repos/asf/flex-sdk.git
> https://git-wip-us.apache.org/repos/asf/flex-tlf.git
> https://git-wip-us.apache.org/repos/asf/flex-utilities.git
>
> I have not migrated whiteboard or site. (site will stay SVN, and be writable after we're finished with this.)
> I am open to moving whiteboard, but you'll have to tell me explicitly that you want to move it - otherwise when we are done I'll make both site and whiteboard writable in SVN.
>
> The git repos are also read only. Please have the FLEX PMC look at the repos, see if they are acceptable, all branches are present, etc, and if found accordingly, please update this ticket and I'll make them writable.
>
> -----Message d'origine----- From: Frédéric THOMAS
> Sent: Tuesday, March 12, 2013 7:26 AM
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
>
> Just to be sure, what's the exact address for the develop branch ?
>
> http://git.apache.org/flex-sdk.git or http://github.com/apache/flex-sdk or
> that the same pointer ?
>
> -Fred
>
> -----Message d'origine----- From: Justin Mclean
> Sent: Tuesday, March 12, 2013 7:10 AM
> To: dev@flex.apache.org
> Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
>
> Hi,
>
>> Then what's the process to move SCM w/o to loose anything ?
>
>
> Best way I think is to do a full git clone in a new area, create a patch in
> SVN and then reapply that patch to the new git repo just trying that now.
> Anyone have any other ideas?
>
> Justin
>
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
Ok, I think I've got it from this tickect
https://issues.apache.org/jira/browse/INFRA-5549 [1], so, I'm going to wait
everything is ok and writable before I try to loose everything.
-Fred
[1]
I've migrated the repos as follows:
https://git-wip-us.apache.org/repos/asf/flex-falcon.git
https://git-wip-us.apache.org/repos/asf/flex-sdk.git
https://git-wip-us.apache.org/repos/asf/flex-tlf.git
https://git-wip-us.apache.org/repos/asf/flex-utilities.git
I have not migrated whiteboard or site. (site will stay SVN, and be writable
after we're finished with this.)
I am open to moving whiteboard, but you'll have to tell me explicitly that
you want to move it - otherwise when we are done I'll make both site and
whiteboard writable in SVN.
The git repos are also read only. Please have the FLEX PMC look at the
repos, see if they are acceptable, all branches are present, etc, and if
found accordingly, please update this ticket and I'll make them writable.
-----Message d'origine-----
From: Frédéric THOMAS
Sent: Tuesday, March 12, 2013 7:26 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Just to be sure, what's the exact address for the develop branch ?
http://git.apache.org/flex-sdk.git or http://github.com/apache/flex-sdk or
that the same pointer ?
-Fred
-----Message d'origine-----
From: Justin Mclean
Sent: Tuesday, March 12, 2013 7:10 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
> Then what's the process to move SCM w/o to loose anything ?
Best way I think is to do a full git clone in a new area, create a patch in
SVN and then reapply that patch to the new git repo just trying that now.
Anyone have any other ideas?
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
Just to be sure, what's the exact address for the develop branch ?
http://git.apache.org/flex-sdk.git or http://github.com/apache/flex-sdk or
that the same pointer ?
-Fred
-----Message d'origine-----
From: Justin Mclean
Sent: Tuesday, March 12, 2013 7:10 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
> Then what's the process to move SCM w/o to loose anything ?
Best way I think is to do a full git clone in a new area, create a patch in
SVN and then reapply that patch to the new git repo just trying that now.
Anyone have any other ideas?
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
Hi Alex,
Yes, unfortunatly, it's too late, I've got things to commit.
-Fred
-----Message d'origine-----
From: Alex Harui
Sent: Tuesday, March 12, 2013 7:21 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
On 3/11/13 11:10 PM, "Justin Mclean" <ju...@classsoftware.com> wrote:
> Hi,
>
>> Then what's the process to move SCM w/o to loose anything ?
>
>
> Best way I think is to do a full git clone in a new area, create a patch
> in
> SVN and then reapply that patch to the new git repo just trying that now.
> Anyone have any other ideas?
>
IMO, we should not be migrating to GIT until after the installer release,
but I guess it is too late for that.
--
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Alex Harui <ah...@adobe.com>.
On 3/11/13 11:10 PM, "Justin Mclean" <ju...@classsoftware.com> wrote:
> Hi,
>
>> Then what's the process to move SCM w/o to loose anything ?
>
>
> Best way I think is to do a full git clone in a new area, create a patch in
> SVN and then reapply that patch to the new git repo just trying that now.
> Anyone have any other ideas?
>
IMO, we should not be migrating to GIT until after the installer release,
but I guess it is too late for that.
--
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> Then what's the process to move SCM w/o to loose anything ?
Best way I think is to do a full git clone in a new area, create a patch in SVN and then reapply that patch to the new git repo just trying that now. Anyone have any other ideas?
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
Really !? Good !
Then what's the process to move SCM w/o to loose anything ?
-Fred
-----Message d'origine-----
From: Om
Sent: Tuesday, March 12, 2013 4:03 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
On Mar 11, 2013 7:53 PM, "Justin Mclean" <ju...@classsoftware.com> wrote:
>
> Hi,
>
> > But I can't commit, still 403, I'll see that tomorrow, it's late here.
>
>
> That's because SVN is currently ready only due to the changeover to git.
>
> Justin
Haha, great timing! Well, we asked for it and we got it! TortoiseGit it is
then :-)
Om
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Om <bi...@gmail.com>.
On Mar 11, 2013 7:53 PM, "Justin Mclean" <ju...@classsoftware.com> wrote:
>
> Hi,
>
> > But I can't commit, still 403, I'll see that tomorrow, it's late here.
>
>
> That's because SVN is currently ready only due to the changeover to git.
>
> Justin
Haha, great timing! Well, we asked for it and we got it! TortoiseGit it is
then :-)
Om
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> But I can't commit, still 403, I'll see that tomorrow, it's late here.
That's because SVN is currently ready only due to the changeover to git.
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
The lack of full highlights is pretty ugly, more than the scrollbar to me
but given you and Justin prefer the first one, I comeback on it.
-Fred
-----Message d'origine-----
From: Om
Sent: Tuesday, March 12, 2013 3:37 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
On Mar 11, 2013 6:50 PM, "Frédéric THOMAS" <we...@hotmail.com> wrote:
>
> - "Install Log" and "Close" buttons are grey, while they do have a
rollover
> someone may think they are disabled.
>
> They have a highlighted border, anyway, they are all a bit too pale for
my taste, if someone good in design wants to help...
>
>
>
> - Highlight in language drop down is cut off and doesn't extend to RHS of
> drop down.
>
> As soon we use a layout with requestedRowCount, it happens, I don't know
if it is a bug.
> I removed the layout to have the hightlights drawn correctly but as
drawback, there's a scrollbar but it doesn't bother.
I think it its a bug as well. I have seen this in other scenarios as
well. In any case, I think the scrollbar is more bothersome than the lack
of full highlights. But it is upto you.
Thanks,
Om
>
> But I can't commit, still 403, I'll see that tomorrow, it's late here.
>
> -Fred
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Om <bi...@gmail.com>.
On Mar 11, 2013 6:50 PM, "Frédéric THOMAS" <we...@hotmail.com> wrote:
>
> - "Install Log" and "Close" buttons are grey, while they do have a
rollover
> someone may think they are disabled.
>
> They have a highlighted border, anyway, they are all a bit too pale for
my taste, if someone good in design wants to help...
>
>
>
> - Highlight in language drop down is cut off and doesn't extend to RHS of
> drop down.
>
> As soon we use a layout with requestedRowCount, it happens, I don't know
if it is a bug.
> I removed the layout to have the hightlights drawn correctly but as
drawback, there's a scrollbar but it doesn't bother.
I think it its a bug as well. I have seen this in other scenarios as
well. In any case, I think the scrollbar is more bothersome than the lack
of full highlights. But it is upto you.
Thanks,
Om
>
> But I can't commit, still 403, I'll see that tomorrow, it's late here.
>
> -Fred
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
- "Install Log" and "Close" buttons are grey, while they do have a rollover
someone may think they are disabled.
They have a highlighted border, anyway, they are all a bit too pale for my
taste, if someone good in design wants to help...
- Highlight in language drop down is cut off and doesn't extend to RHS of
drop down.
As soon we use a layout with requestedRowCount, it happens, I don't know if
it is a bug.
I removed the layout to have the hightlights drawn correctly but as
drawback, there's a scrollbar but it doesn't bother.
But I can't commit, still 403, I'll see that tomorrow, it's late here.
-Fred
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
The problem as well is the translation will be only in English and French
except if we ask for volunteers again.
-----Message d'origine-----
From: Justin Mclean
Sent: Tuesday, March 12, 2013 2:01 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
> If the latter, can we just be explicit: "This application will
> ping a server in order to count the number of times the application is
> run.
> No personal identifying information will be transmitted".
Works for but may not fit into the UI.
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Om <bi...@gmail.com>.
On Mar 11, 2013 6:02 PM, "Justin Mclean" <ju...@classsoftware.com> wrote:
>
> Hi,
>
> > If the latter, can we just be explicit: "This application will
> > ping a server in order to count the number of times the application is
run.
> > No personal identifying information will be transmitted".
>
>
> Works for but may not fit into the UI.
>
> Justin
We count the number of times the installation completes successfully, btw.
Thanks,
Om
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
> If the latter, can we just be explicit: "This application will
> ping a server in order to count the number of times the application is run.
> No personal identifying information will be transmitted".
Works for but may not fit into the UI.
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Alex Harui <ah...@adobe.com>.
On 3/11/13 5:38 PM, "Frédéric THOMAS" <we...@hotmail.com> wrote:
>
> - "Information about use of this application is being collected via HTTP
> requests" sounds rather scary...to something like "Anonymous/non identifying
> information is collected to improve the quality of this installer"
>
Are we doing it to improve the quality of the installer or just to count
downloads? If the latter, can we just be explicit: "This application will
ping a server in order to count the number of times the application is run.
No personal identifying information will be transmitted".
--
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Frédéric THOMAS <we...@hotmail.com>.
- By default 11.1 and 11.4 player globals were downloaded, as they are
reasonably small why not download them all?
Given the defaut AIR version is 3.4, it should be at least FP 11.4 but we
built the sources with 11.1 :P
If we want both, I have to check but I would say, it requires another step.
- "Install Log" and "Close" buttons are grey, while they do have a rollover
someone may think they are disabled.
Ok, someone would like to propose a color ?
- "Information about use of this application is being collected via HTTP
requests" sounds rather scary...to something like "Anonymous/non identifying
information is collected to improve the quality of this installer"
Fine to me.
- Highlight in language drop down is cut off and doesn't extend to RHS of
drop down.
I haven't seen, I check that.
- "Information about use of this application is being collected via HTTP
requests" locale missing in Spanish, Greek and Portuguese.
- Locale for "Log" button in Portuguese missing
It's known but until nobody wants to translate it, I guess it can fall back
in English.
- Looks like the Greek locale has issues - perhaps text not checked in as
UTF8? Black diamonds with "?" show up in text.
I've just seen that, could be because of the very recent change in the font
? I don't know, I'll check.
-Fred
-----Message d'origine-----
From: Justin Mclean
Sent: Tuesday, March 12, 2013 1:19 AM
To: dev@flex.apache.org
Subject: Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Hi,
Looks goods and worked without an issue on OSX with an Australian locale.
Some possible room for minor (some very minor) improvements:
- By default 11.1 and 11.4 player globals were downloaded, as they are
reasonably small why not download them all?
- "Install Log" and "Close" buttons are grey, while they do have a rollover
someone may think they are disabled.
- "Information about use of this application is being collected via HTTP
requests" sounds rather scary, there no was to opt out and there no
indication to what information is being collected or why it's being
collected. Think we need a link to short paragraph saying what is collected
and why.
- Can we change "Information about use of this application is being
collected via HTTP requests" to something like "Anonymous/non identifying
information is collected to improve the quality of this installer"
- Highlight in language drop down is cut off and doesn't extend to RHS of
drop down.
- "Information about use of this application is being collected via HTTP
requests" locale missing in Spanish, Greek and Portuguese.
- Locale for "Log" button in Portuguese missing
- Looks like the Greek locale has issues - perhaps text not checked in as
UTF8? Black diamonds with "?" show up in text.
Thanks,
Justin
Re: [DISCUSS] Apache Flex SDK Installer 2.5 RC1
Posted by Justin Mclean <ju...@classsoftware.com>.
Hi,
Looks goods and worked without an issue on OSX with an Australian locale.
Some possible room for minor (some very minor) improvements:
- By default 11.1 and 11.4 player globals were downloaded, as they are reasonably small why not download them all?
- "Install Log" and "Close" buttons are grey, while they do have a rollover someone may think they are disabled.
- "Information about use of this application is being collected via HTTP requests" sounds rather scary, there no was to opt out and there no indication to what information is being collected or why it's being collected. Think we need a link to short paragraph saying what is collected and why.
- Can we change "Information about use of this application is being collected via HTTP requests" to something like "Anonymous/non identifying information is collected to improve the quality of this installer"
- Highlight in language drop down is cut off and doesn't extend to RHS of drop down.
- "Information about use of this application is being collected via HTTP requests" locale missing in Spanish, Greek and Portuguese.
- Locale for "Log" button in Portuguese missing
- Looks like the Greek locale has issues - perhaps text not checked in as UTF8? Black diamonds with "?" show up in text.
Thanks,
Justin