You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@plc4x.apache.org by Andy Grebe <an...@gmail.com> on 2022/06/01 17:24:47 UTC
Re: Subscription Simulation
Thanks Ben, I'll check this out.
On Sun, May 29, 2022 at 5:46 PM Ben Hutcheson <be...@gmail.com> wrote:
> Andy, I'm not sure if you're aware but there is a scraper
> https://plc4x.apache.org/users/tools/scraper.html which you can use to
> continuously poll data even when the driver doesn't support subscriptions.
>
> On Mon, May 30, 2022 at 7:42 AM Łukasz Dywicki <lu...@code-house.org>
> wrote:
>
> > The simulation of subscriptions require probably more options than just
> > "event" or so. You probably need to configure higher frequency for
> > polling and ideally manage thread pool for that independently from
> > netty/connection itself to have control over its reliability.
> >
> > If I could have one suggestion.. try making it via decoration of
> > connection/driver. It gives you most of the flexibility without going to
> > close with driver.
> >
> > I made some decorator support earlier. Base structure is here:
> >
> >
> https://github.com/ConnectorIO/connectorio-addons/tree/master/bundles/org.connectorio.plc4x.decorator/src/main/java/org/connectorio/plc4x/decorator
> > example of "retry" logic for connection read/write/subscribe:
> >
> >
> https://github.com/ConnectorIO/connectorio-addons/blob/master/bundles/org.connectorio.plc4x.decorator.retry/src/main/java/org/connectorio/plc4x/decorator/retry/RetryDecorator.java
> >
> > If you find it useful for your thing we can move it into develop and
> > maintain together.
> >
> > Best,
> > Łukasz
> >
> >
> > On 29.05.2022 23:34, Andy Grebe wrote:
> > > hmmm... I should probably push those CIP changes first :)
> > >
> > > On Wed, May 25, 2022 at 10:14 AM Christofer Dutz <
> > christofer.dutz@c-ware.de>
> > > wrote:
> > >
> > >> Hi Andy,
> > >>
> > >> It still is our plan :-)
> > >>
> > >> Just nobody did it yet ;-)
> > >>
> > >> Chris
> > >>
> > >> -----Original Message-----
> > >> From: Andy Grebe <an...@gmail.com>
> > >> Sent: Mittwoch, 25. Mai 2022 15:58
> > >> To: dev@plc4x.apache.org
> > >> Subject: Subscription Simulation
> > >>
> > >> From the Getting Started guide, So if a protocol doesn’t support
> > >> subscription based communication it is our goal to simulate this by
> > polling
> > >> in the background so it is transparent for the users.
> > >>
> > >> Has this been implemented for any of the protocols?
> > >>
> > >> Thanks,
> > >> Andy
> > >>
> > >
> >
>
Re: Subscription Simulation
Posted by Andy Grebe <an...@gmail.com>.
I used the scraper and so far great results!
On Thu, Jun 2, 2022, 1:04 PM Łukasz Dywicki <lu...@code-house.org> wrote:
> FYI, I moved the decorator stuff (as well as osgi related modules) to
> separate repo:
> http://github.com/connectorio/plc4x-extras/
>
> I made first release, so it will be in maven central in coming hours.
>
> You can pull it via maven coordinates:
> <dependency>
> <groupId>org.connectorio.plc4x.extras</groupId>
> <artifactId>org.connectorio.plc4x.extras.decorator</artifactId>
> <version>0.8.0</version>
> </dependency>
>
> Difference between this and scrapper is complexity - scrapper is a
> separate executable while extras I link are supplements to plc4x apis
> which could be embedded in your thing.
>
> Best,
> Łukasz
>
>
> On 1.06.2022 19:24, Andy Grebe wrote:
> > Thanks Ben, I'll check this out.
> >
> > On Sun, May 29, 2022 at 5:46 PM Ben Hutcheson <be...@gmail.com>
> wrote:
> >
> >> Andy, I'm not sure if you're aware but there is a scraper
> >> https://plc4x.apache.org/users/tools/scraper.html which you can use to
> >> continuously poll data even when the driver doesn't support
> subscriptions.
> >>
> >> On Mon, May 30, 2022 at 7:42 AM Łukasz Dywicki <lu...@code-house.org>
> >> wrote:
> >>
> >>> The simulation of subscriptions require probably more options than just
> >>> "event" or so. You probably need to configure higher frequency for
> >>> polling and ideally manage thread pool for that independently from
> >>> netty/connection itself to have control over its reliability.
> >>>
> >>> If I could have one suggestion.. try making it via decoration of
> >>> connection/driver. It gives you most of the flexibility without going
> to
> >>> close with driver.
> >>>
> >>> I made some decorator support earlier. Base structure is here:
> >>>
> >>>
> >>
> https://github.com/ConnectorIO/connectorio-addons/tree/master/bundles/org.connectorio.plc4x.decorator/src/main/java/org/connectorio/plc4x/decorator
> >>> example of "retry" logic for connection read/write/subscribe:
> >>>
> >>>
> >>
> https://github.com/ConnectorIO/connectorio-addons/blob/master/bundles/org.connectorio.plc4x.decorator.retry/src/main/java/org/connectorio/plc4x/decorator/retry/RetryDecorator.java
> >>>
> >>> If you find it useful for your thing we can move it into develop and
> >>> maintain together.
> >>>
> >>> Best,
> >>> Łukasz
> >>>
> >>>
> >>> On 29.05.2022 23:34, Andy Grebe wrote:
> >>>> hmmm... I should probably push those CIP changes first :)
> >>>>
> >>>> On Wed, May 25, 2022 at 10:14 AM Christofer Dutz <
> >>> christofer.dutz@c-ware.de>
> >>>> wrote:
> >>>>
> >>>>> Hi Andy,
> >>>>>
> >>>>> It still is our plan :-)
> >>>>>
> >>>>> Just nobody did it yet ;-)
> >>>>>
> >>>>> Chris
> >>>>>
> >>>>> -----Original Message-----
> >>>>> From: Andy Grebe <an...@gmail.com>
> >>>>> Sent: Mittwoch, 25. Mai 2022 15:58
> >>>>> To: dev@plc4x.apache.org
> >>>>> Subject: Subscription Simulation
> >>>>>
> >>>>> From the Getting Started guide, So if a protocol doesn’t support
> >>>>> subscription based communication it is our goal to simulate this by
> >>> polling
> >>>>> in the background so it is transparent for the users.
> >>>>>
> >>>>> Has this been implemented for any of the protocols?
> >>>>>
> >>>>> Thanks,
> >>>>> Andy
> >>>>>
> >>>>
> >>>
> >>
> >
>
Re: Subscription Simulation
Posted by Łukasz Dywicki <lu...@code-house.org>.
FYI, I moved the decorator stuff (as well as osgi related modules) to
separate repo:
http://github.com/connectorio/plc4x-extras/
I made first release, so it will be in maven central in coming hours.
You can pull it via maven coordinates:
<dependency>
<groupId>org.connectorio.plc4x.extras</groupId>
<artifactId>org.connectorio.plc4x.extras.decorator</artifactId>
<version>0.8.0</version>
</dependency>
Difference between this and scrapper is complexity - scrapper is a
separate executable while extras I link are supplements to plc4x apis
which could be embedded in your thing.
Best,
Łukasz
On 1.06.2022 19:24, Andy Grebe wrote:
> Thanks Ben, I'll check this out.
>
> On Sun, May 29, 2022 at 5:46 PM Ben Hutcheson <be...@gmail.com> wrote:
>
>> Andy, I'm not sure if you're aware but there is a scraper
>> https://plc4x.apache.org/users/tools/scraper.html which you can use to
>> continuously poll data even when the driver doesn't support subscriptions.
>>
>> On Mon, May 30, 2022 at 7:42 AM Łukasz Dywicki <lu...@code-house.org>
>> wrote:
>>
>>> The simulation of subscriptions require probably more options than just
>>> "event" or so. You probably need to configure higher frequency for
>>> polling and ideally manage thread pool for that independently from
>>> netty/connection itself to have control over its reliability.
>>>
>>> If I could have one suggestion.. try making it via decoration of
>>> connection/driver. It gives you most of the flexibility without going to
>>> close with driver.
>>>
>>> I made some decorator support earlier. Base structure is here:
>>>
>>>
>> https://github.com/ConnectorIO/connectorio-addons/tree/master/bundles/org.connectorio.plc4x.decorator/src/main/java/org/connectorio/plc4x/decorator
>>> example of "retry" logic for connection read/write/subscribe:
>>>
>>>
>> https://github.com/ConnectorIO/connectorio-addons/blob/master/bundles/org.connectorio.plc4x.decorator.retry/src/main/java/org/connectorio/plc4x/decorator/retry/RetryDecorator.java
>>>
>>> If you find it useful for your thing we can move it into develop and
>>> maintain together.
>>>
>>> Best,
>>> Łukasz
>>>
>>>
>>> On 29.05.2022 23:34, Andy Grebe wrote:
>>>> hmmm... I should probably push those CIP changes first :)
>>>>
>>>> On Wed, May 25, 2022 at 10:14 AM Christofer Dutz <
>>> christofer.dutz@c-ware.de>
>>>> wrote:
>>>>
>>>>> Hi Andy,
>>>>>
>>>>> It still is our plan :-)
>>>>>
>>>>> Just nobody did it yet ;-)
>>>>>
>>>>> Chris
>>>>>
>>>>> -----Original Message-----
>>>>> From: Andy Grebe <an...@gmail.com>
>>>>> Sent: Mittwoch, 25. Mai 2022 15:58
>>>>> To: dev@plc4x.apache.org
>>>>> Subject: Subscription Simulation
>>>>>
>>>>> From the Getting Started guide, So if a protocol doesn’t support
>>>>> subscription based communication it is our goal to simulate this by
>>> polling
>>>>> in the background so it is transparent for the users.
>>>>>
>>>>> Has this been implemented for any of the protocols?
>>>>>
>>>>> Thanks,
>>>>> Andy
>>>>>
>>>>
>>>
>>
>