You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@subversion.apache.org by Pe...@bench.com on 2004/12/22 21:14:23 UTC

RE: [Warning: External Sender. Domain Possibly Forged] svn + apache + ssl

If the bot thinks I am an external sender, then what URL do I send to so it doesn't think this?  I have registered and gotten a confirmation "WELCOME to users@subversion.tigris.org" message.  I am sending to users@subversion.tigris.org.  Is this wrong?
 
Pete
 
-----Original Message-----
From: Van Echaute, Peter 
Sent: Wednesday, December 22, 2004 1:43 PM
To: users@subversion.tigris.org
Subject: [Warning: External Sender. Domain Possibly Forged] svn + apache + ssl
 
Hello All,
 
I hope your all having a good holiday season so far.  I'm attempting to setup a SVN server.  My machine is RHEL 3 using Apache 2.0.52, mod_ssl 2.0.52, OpenSSL 0.9.7a, DAV 2, and SVN 1.1.1.  What I would like to accomplish is svn access through Apache and being authenticated using a single SSL x509 cert.  I have a group of local accounts that are chroot jailed, so straight svn access isn't something I can do (ex: svn co svn://ip/svn/repo).  So what I forsee is access through Apache which doesn't go through the local accounts (ex: svn co https://ip/svn/repo).  I understand that during the checkout, that it stores user credentials.  My problem is that I can 'co' just fine, but I can't edit and then commit.  Here is the command I used to create the working copy...
 
svn co --username testaccount --password testaccount https://192.168.1.254/svn/design
 
I created an account called 'testaccount'.  Here is the config portions that are relavent...
 
 
 
httpd.conf..
<Location /svn>
DAV svn
SVNParentPath /usr/local/subversion/repositories
 
# our access control policy
AuthzSVNAccessFile /usr/local/subversion/svn-auth-users-access
 
# try anonymous access first, resort to real
# authentication if necessary.
Require valid-user
 
SSLVerifyClient require
SSLVerifyDepth  2
 
# how to authenticate a user
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /usr/local/subversion/httpd-svn-auth-users-pw
</Location>
 
 
NOTE: The AuthUserFile directive above and the password-db are two different files but httpdxxx is htpasswd encrypted and the svn-authxxx is plain text.  Both containing the same info though.
 
 
svnserve.conf...
[general]
password-db = /usr/local/subversion/svn-auth-users-pw
realm = Design Engineering
 
# anonymous users aren't allowed
anon-access = none
 
# authenticated users can both read and write
auth-access = write
 
 
 
the svnserver is run as svn...
svn      32481  0.0  0.0  4936  940 ?        S    Dec21   0:00 /usr/local/bin/svnserve.orig -d -T -r /usr/local/subversion/repositories
 
 
 
I created the repo as such...
svnadmin create /usr/local/subversion/repositories/design
chown -R svn:svn *
chmod 775 design
chmod -R g=u design
/usr/local/bin/htpasswd -m /usr/local/subversion/httpd-svn-auth-users-pw testaccount
 
 
 
cat /usr/local/subversion/svn-auth-users-access
[groups]
everyone = testaccount
testaccount-host = 192.168.1.23
 
[design:/]
@everyone = rw
 
[testaccount-host]
ssl-client-cert-file = /usr/local/conf/ssl.users/sslusers.p12
ssl-client-cert-password = blah
 
 
 
 
I have created three sets of SSL certs (CA, Server, Client)...
ls /usr/local/conf/ssl.key
ca.csr  ca.key  server.csr  server.key  sslusers.csr  sslusers.key
 
ls /usr/local/conf/ssl.crt
ca.crt  server.crt  sslusers.crt
 
ls /usr/local/conf/ssl.users
sslusers.p12
 
 
 
I'm not sure what else to add here, but here is my problem...
 
svn co -username testaccount -password testaccount https://192.168.1.254/svn/design
svn commit -m "testing." --username testaccount --password testaccount
Authentication realm: https:// 192.168.1.254:443
Client certificate filename: /home/testaccount/sslusers.p12
Passphrase for '/home/testaccount/sslusers.p12':
Sending        nforce4/Config.lb
Transmitting file data .svn: Commit failed (details follow):
svn: PUT of '/svn/design/!svn/wrk/93cedd7b-d8eb-0310-b2c4-90868bc6e483/freebios2/targets/nvidia/nforce4/Config.lb': 403 Forbidden (https:// 192.168.1.254)
 
 
 
Any help is greatly appreciated.  Happy Holidays.
 
Cheers,
Pete

Re: [Warning: External Sender. Domain Possibly Forged] svn + apache + ssl

Posted by Jeremy Pereira <je...@ntlworld.com>.
On Dec 22, 2004, at 21:14, <Pe...@bench.com> wrote:

> If the bot thinks I am an external sender, then what URL do I send to  
> so it doesn’t think this?  I have registered and gotten a confirmation  
> “WELCOME to users@subversion.tigris.org” message.  I am sending to  
> users@subversion.tigris.org.  Is this wrong?

I would guess that it's your mail gateway inserting that into the  
subject.  The warning wasn't in my copy of your original message.

The mailing list doesn't alter the from address (and possibly the  
envelope sender?) so the message we all got appears to have come from  
you even though it actually came from the Subversion mailing list  
server.  Your gateway has picked this up and realised that a message  
apparently from you has come from outside of your network.

>
>  
>
> Pete
>
>  
>
> -----Original Message-----
> From: Van Echaute, Peter
>  Sent: Wednesday, December 22, 2004 1:43 PM
> To: users@subversion.tigris.org
> Subject: [Warning: External Sender. Domain Possibly Forged] svn +  
> apache + ssl
>
>  
>
> Hello All,
>
>  
>
> I hope your all having a good holiday season so far.  I’m attempting  
> to setup a SVN server.  My machine is RHEL 3 using Apache 2.0.52,  
> mod_ssl 2.0.52, OpenSSL 0.9.7a, DAV 2, and SVN 1.1.1.  What I would  
> like to accomplish is svn access through Apache and being  
> authenticated using a single SSL x509 cert.  I have a group of local  
> accounts that are chroot jailed, so straight svn access isn’t  
> something I can do (ex: svn co svn://ip/svn/repo).  So what I forsee  
> is access through Apache which doesn’t go through the local accounts  
> (ex: svn co https://ip/svn/repo).  I understand that during the  
> checkout, that it stores user credentials.  My problem is that I can  
> ‘co’ just fine, but I can’t edit and then commit.  Here is the command  
> I used to create the working copy…
>
>  
>
> svn co --username testaccount --password testaccount  
> https://192.168.1.254/svn/design
>
>  
>
> I created an account called ‘testaccount’.  Here is the config  
> portions that are relavent…
>
>  
>
>  
>
>  
>
> httpd.conf..
>
> <Location /svn>
>
> DAV svn
>
> SVNParentPath /usr/local/subversion/repositories
>
>  
>
> # our access control policy
>
> AuthzSVNAccessFile /usr/local/subversion/svn-auth-users-access
>
>  
>
> # try anonymous access first, resort to real
>
> # authentication if necessary.
>
> Require valid-user
>
>  
>
> SSLVerifyClient require
>
> SSLVerifyDepth  2
>
>  
>
> # how to authenticate a user
>
> AuthType Basic
>
> AuthName "Subversion repository"
>
> AuthUserFile /usr/local/subversion/httpd-svn-auth-users-pw
>
> </Location>
>
>  
>
>  
>
> NOTE: The AuthUserFile directive above and the password-db are two  
> different files but httpdxxx is htpasswd encrypted and the svn-authxxx  
> is plain text.  Both containing the same info though.
>
>  
>
>  
>
> svnserve.conf…
>
> [general]
>
> password-db = /usr/local/subversion/svn-auth-users-pw
>
> realm = Design Engineering
>
>  
>
> # anonymous users aren't allowed
>
> anon-access = none
>
>  
>
> # authenticated users can both read and write
>
> auth-access = write
>
>  
>
>  
>
>  
>
> the svnserver is run as svn…
>
> svn      32481  0.0  0.0  4936  940 ?        S    Dec21   0:00  
> /usr/local/bin/svnserve.orig -d -T -r  
> /usr/local/subversion/repositories
>
>  
>
>  
>
>  
>
> I created the repo as such…
>
> svnadmin create /usr/local/subversion/repositories/design
>
> chown -R svn:svn *
>
> chmod 775 design
>
> chmod -R g=u design
>
> /usr/local/bin/htpasswd -m  
> /usr/local/subversion/httpd-svn-auth-users-pw testaccount
>
>  
>
>  
>
>  
>
> cat /usr/local/subversion/svn-auth-users-access
>
> [groups]
>
> everyone = testaccount
>
> testaccount-host = 192.168.1.23
>
>  
>
> [design:/]
>
> @everyone = rw
>
>  
>
> [testaccount-host]
>
> ssl-client-cert-file = /usr/local/conf/ssl.users/sslusers.p12
>
> ssl-client-cert-password = blah
>
>  
>
>  
>
>  
>
>  
>
> I have created three sets of SSL certs (CA, Server, Client)…
>
> ls /usr/local/conf/ssl.key
>
> ca.csr  ca.key  server.csr  server.key  sslusers.csr  sslusers.key
>
>  
>
> ls /usr/local/conf/ssl.crt
>
> ca.crt  server.crt  sslusers.crt
>
>  
>
> ls /usr/local/conf/ssl.users
>
> sslusers.p12
>
>  
>
>  
>
>  
>
> I’m not sure what else to add here, but here is my problem…
>
>  
>
> svn co –username testaccount –password testaccount  
> https://192.168.1.254/svn/design
>
> svn commit -m "testing." --username testaccount --password testaccount
>
> Authentication realm: https:// 192.168.1.254:443
>
> Client certificate filename: /home/testaccount/sslusers.p12
>
> Passphrase for '/home/testaccount/sslusers.p12':
>
> Sending        nforce4/Config.lb
>
> Transmitting file data .svn: Commit failed (details follow):
>
> svn: PUT of  
> '/svn/design/!svn/wrk/93cedd7b-d8eb-0310-b2c4-90868bc6e483/freebios2/ 
> targets/nvidia/nforce4/Config.lb': 403 Forbidden (https://  
> 192.168.1.254)
>
>  
>
>  
>
>  
>
> Any help is greatly appreciated.  Happy Holidays.
>
>  
>
> Cheers,
>
> Pete
>
--
Jeremy Pereira
http://www.jeremyp.net


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@subversion.tigris.org
For additional commands, e-mail: users-help@subversion.tigris.org