You are viewing a plain text version of this content. The canonical link for it is here.
Posted to c-user@axis.apache.org by Yogender Singh01 <Yo...@infosys.com> on 2007/04/26 07:33:07 UTC
[Axis2C] Regarding WSDL2C tool for Axis2C
Hi all,
Which jar file is to be included in CLASSPATH for this tool?
TIA
yogender
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
Re: [Axis2] SSL and certificate support
Posted by Dumindu Pallewela <du...@wso2.com>.
Greg Denton wrote:
>>> Note that ssl transport is not a feature of rampart, but of Axis2/C
> itself.
>
> Just to confirm, the documentation seems to imply that SSL transport is
> not a part of Axis2/C "server-side" (I guess this would be the "simple
> axis server") only client. For server-side, apache must be used,
> correct?
Yes, simple_axis_server is incapable of handling SSL requests.
What I meant by saying that the SSL transport is a feature of Axis2/C is
that Rampart has nothing to do with the SSL transport (yet). Sorry if
it was misleading.
> I found the client certificate info in the new docs, thanks.
IIRC, SSL Client authentication is a post-0.96 feature. It will be
updated in the site with the next release.
Regards,
Dumindu.
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-user-help@ws.apache.org
RE: [Axis2] SSL and certificate support
Posted by Greg Denton <gr...@klir.com>.
>> Note that ssl transport is not a feature of rampart, but of Axis2/C
itself.
Just to confirm, the documentation seems to imply that SSL transport is
not a part of Axis2/C "server-side" (I guess this would be the "simple
axis server") only client. For server-side, apache must be used,
correct? (I imagine this is due to the extreme security requirements of
the server and wanting to reuse apache to meet them.)
I found the client certificate info in the new docs, thanks.
Thanks.
-----Original Message-----
From: Dumindu Pallewela [mailto:dumindu@wso2.com]
Sent: Thursday, April 26, 2007 10:40 PM
To: Apache AXIS C User List
Subject: Re: [Axis2] SSL and certificate support
Hi Greg,
>> Sorry if this is in some documentation somewhere (I've tried and not
>> found if). A cursory glance at the rampart code shows a lot of
>> references to ssl and certificates. Some specific questions:
>>
>> Is SSL supported on server side? Client?
Yes, Axis2/C supports both ssl server authentication and client
authentication. Please refer to the axis2c manual [1].
I would suggest you use axis2 1.0.0 RC3 [2] or the latest svn head,
since ssl transport has been updated since 0.96 release. In this case
you will have to refer to the documentation from the trunk [3].
Note that ssl transport is not a feature of rampart, but of Axis2/C
itself.
Regards,
Dumindu.
[1] http://ws.apache.org/axis2/c/docs/axis2c_manual.html#ssl_client
[2] http://people.apache.org/~samisa/release/1.0.0/RC3/
[3] http://svn.apache.org/viewvc/webservices/axis2/trunk/c/xdocs/docs/
axis2c_manual.html?view=co#ssl_client
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-user-help@ws.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-user-help@ws.apache.org
Re: [Axis2] SSL and certificate support
Posted by Dumindu Pallewela <du...@wso2.com>.
Hi Greg,
>> Sorry if this is in some documentation somewhere (I’ve tried and not
>> found if). A cursory glance at the rampart code shows a lot of
>> references to ssl and certificates. Some specific questions:
>>
>> Is SSL supported on server side? Client?
Yes, Axis2/C supports both ssl server authentication and client
authentication. Please refer to the axis2c manual [1].
I would suggest you use axis2 1.0.0 RC3 [2] or the latest svn head,
since ssl transport has been updated since 0.96 release. In this case
you will have to refer to the documentation from the trunk [3].
Note that ssl transport is not a feature of rampart, but of Axis2/C itself.
Regards,
Dumindu.
[1] http://ws.apache.org/axis2/c/docs/axis2c_manual.html#ssl_client
[2] http://people.apache.org/~samisa/release/1.0.0/RC3/
[3] http://svn.apache.org/viewvc/webservices/axis2/trunk/c/xdocs/docs/
axis2c_manual.html?view=co#ssl_client
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-user-help@ws.apache.org
[Axis2] SSL and certificate support
Posted by Dumindu Pallewela <du...@wso2.com>.
Please use the correct prefix...
Dumindu.
Greg Denton wrote:
> Sorry if this is in some documentation somewhere (I’ve tried and not
> found if). A cursory glance at the rampart code shows a lot of
> references to ssl and certificates. Some specific questions:
>
>
>
> Is SSL supported on server side? Client?
>
>
>
> Are client side certificates (i.e. server-requested client
> authentication via certificates) supported on the server side? Client?
>
>
>
> Thanks.
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-user-help@ws.apache.org
about echo samples problems
Posted by 黄启雄 <hu...@hisuntech.com>.
In the echo sample, it will send the request twice with the same option.
But now I want to send the second request with another option, so before I
send the second
request , I invoke “axis2_svc_client_set_options(svc_client, env,
options)” again.After compile,
I execute the program , it coredumped when it try to send the second
request.
The axis2c version I used is 0.96, have this situation tested in the 1.0
RC3?
At the same time , I found that the windows version the request http
head which is send by echo sample
Is different from Linux version.In the windows version the head use
“Content-Length” to indicate the length
of the body, while linux version use MIME boundary to indicate the length
of the body, But the source of the
echo sample is same! So my question is how to control these through the apis
according my will?
Thanks and Reguards!
Kixiong
SSL and certificate support
Posted by Greg Denton <gr...@klir.com>.
Sorry if this is in some documentation somewhere (I've tried and not
found if). A cursory glance at the rampart code shows a lot of
references to ssl and certificates. Some specific questions:
Is SSL supported on server side? Client?
Are client side certificates (i.e. server-requested client
authentication via certificates) supported on the server side? Client?
Thanks.
Re: [Axis2C] Regarding WSDL2C tool for Axis2C
Posted by Milinda Pathirage <mi...@gmail.com>.
Hi,
To use the WSDL2C tool you have to include all the jars in the Axis2 lib
directory if you download to your class path. Following shell script will do
the all the tasks required.
---------------------------------------------------------------------------------------------------------------
#!/bin/sh
export AXIS2_HOME=/home/axis2java
for f in $AXIS2_HOME/lib/*.jar
do
AXIS2_CLASSPATH=$AXIS2_CLASSPATH:$f
done
export AXIS2_CLASSPATH
echo the classpath $AXIS2_CLASSPATH
java -classpath $AXIS2_CLASSPATH org.apache.axis2.wsdl.WSDL2C $*
---------------------------------------------------------------------------------------------------------------
You can use this script with required options to generate code.
If your script is saved as WSDL2C.sh you can use following command to
generate server side skeletons:
sh WSDL2C.sh -ss -sd -d adb -u -f -o server
You have to change the AXIS2_HOME variable to point your axis2 directory. If
you build from the source point it to target directory.
For the Windows platform use the attached batch script.
Thanks
Milinda
On 4/26/07, Yogender Singh01 <Yo...@infosys.com> wrote:
>
> Hi all,
>
>
>
> Which jar file is to be included in CLASSPATH for this tool?
>
>
>
> TIA
>
> yogender
>
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended
> solely for the use of the addressee(s). If you are not the intended
> recipient, please notify the sender by e-mail and delete the original
> message. Further, you are not to copy, disclose, or distribute this e-mail
> or its contents to any other person and any such actions are unlawful. This
> e-mail may contain viruses. Infosys has taken every reasonable precaution to
> minimize this risk, but is not liable for any damage you may sustain as a
> result of any virus in this e-mail. You should carry out your own virus
> checks before opening the e-mail or attachment. Infosys reserves the right
> to monitor and review the content of all messages sent to or from this
> e-mail address. Messages sent to or from this e-mail address may be stored
> on the Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>
--
milinda@wso2.com
WSO2, Inc: http://www.wso2.com "Oxygenating the Web Service Platform"
http://www.milindalakmal.wordpress.com