You are viewing a plain text version of this content. The canonical link for it is here.
Posted to java-user@axis.apache.org by Michael Meire <mi...@cs.kuleuven.be> on 2006/10/27 10:13:25 UTC
Re: How to set MTOM options in WSDL-generated stubs?
Hi,
I've been spending some time on this issue a few times. I had submitted
a axis2 bug report about that
(http://issues.apache.org/jira/browse/AXIS2-513?page=all) and somewhere
in August, a message was posted there that it is fixed.
Today, I downloaded the latest nightly build, and tried it again,
however without success.
What I did was:
* generate stubs and skeletons
* Based on the explanation in the mtom guide, in the generated
abcStub class, I added the following in the constructor:
_serviceClient.getOptions().setProperty(org.apache.axis2.Constants.Configuration.ENABLE_MTOM,
org.apache.axis2.Constants.VALUE_TRUE);
However, still no MTOM is used...
Did anybody experience more success on this?
thanks,
Michael...
On 07/12/06 10:05, Sean Doyle wrote:
> I've created a WSDL, run it through WSDL2Java, and I wrote some simple
> JUnit tests that transfer files over the interface. But - now I'd like
> to optimize the sending of the files in the client (on the server side
> MTOM is enabled).
>
> From the example at http://ws.apache.org/axis2/1_0/mtom-guide.html I
> see that I should set ENABLE_MTOM to true
>
> ServiceClient serviceClient = new ServiceClient ();
>
> Options options = new Options();
> options.setTo(targetEPR);
> options.setProperty(Constants.Configuration.ENABLE_MTOM, Constants.VALUE_TRUE);
> serviceClient .setOptions(options);
>
> But - I don't see how to use this object on the stub files generated
> by WSDL2Java. I can copy the code from the stub (basically the
> contents of populateAxisService() to return a AxisService object,
> create a new ServiceClient with the AxisService object, then set the
> stub's ServiceClient to this new value.
>
> The net result is that everything works fine now but extremely slowly.
> Sending between two processes on the same machine hits a limit of
> around 180K/second - over a order of magnitude slower than what I was
> expecting (I'm sending files that are around 3MB in size). I'm running
> this on a new Macbook Pro - everything else is quite zippy.
>
> So - if I want speed I think there are two alternatives:
> 1) Someone will point out the magic combination of API calls to enable
> MTOM with my generated code - or
> 2) If this is just a client-side problem - perhaps I code up a
> OMElement interface on the client side to set the ENABLE_MTOM
> parameter to be TRUE?
>
> Other suggestions welcomed :-)
>
> Thanks...
>
> Sean
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-user-help@ws.apache.org
Re: How to set MTOM options in WSDL-generated stubs?
Posted by Michael Meire <mi...@cs.kuleuven.be>.
Hi,
I'm using the xmlbeans data binding for this... Or does it perhaps only
work for ADB data binding?
If you would have a sample that is working for you, I could maybe try
that one out first?
thanks in advance
kind regards,
Michael Meire
On 10/28/06 04:08, Thilina Gunarathne wrote:
> Hmm... I was working well for me... I'm even setting up a new sample
> based on this..
>
> If it's not working please reopen the JIRA... What is the data binding
> mechanism you are using..
>
> ~Thilina
>
> On 10/27/06, Michael Meire <mi...@cs.kuleuven.be> wrote:
>
>> Hi,
>>
>> I've been spending some time on this issue a few times. I had submitted
>> a axis2 bug report about that
>> (http://issues.apache.org/jira/browse/AXIS2-513?page=all) and somewhere
>> in August, a message was posted there that it is fixed.
>> Today, I downloaded the latest nightly build, and tried it again,
>> however without success.
>> What I did was:
>>
>> * generate stubs and skeletons
>> * Based on the explanation in the mtom guide, in the generated
>> abcStub class, I added the following in the constructor:
>>
>> _serviceClient.getOptions().setProperty(org.apache.axis2.Constants.Configuration.ENABLE_MTOM,
>>
>> org.apache.axis2.Constants.VALUE_TRUE);
>>
>> However, still no MTOM is used...
>>
>> Did anybody experience more success on this?
>>
>> thanks,
>> Michael...
>>
>>
>>
>> On 07/12/06 10:05, Sean Doyle wrote:
>>
>> > I've created a WSDL, run it through WSDL2Java, and I wrote some simple
>> > JUnit tests that transfer files over the interface. But - now I'd like
>> > to optimize the sending of the files in the client (on the server side
>> > MTOM is enabled).
>> >
>> > From the example at http://ws.apache.org/axis2/1_0/mtom-guide.html I
>> > see that I should set ENABLE_MTOM to true
>> >
>> > ServiceClient serviceClient = new ServiceClient ();
>> >
>> > Options options = new Options();
>> > options.setTo(targetEPR);
>> > options.setProperty(Constants.Configuration.ENABLE_MTOM,
>> Constants.VALUE_TRUE);
>> > serviceClient .setOptions(options);
>> >
>> > But - I don't see how to use this object on the stub files generated
>> > by WSDL2Java. I can copy the code from the stub (basically the
>> > contents of populateAxisService() to return a AxisService object,
>> > create a new ServiceClient with the AxisService object, then set the
>> > stub's ServiceClient to this new value.
>> >
>> > The net result is that everything works fine now but extremely slowly.
>> > Sending between two processes on the same machine hits a limit of
>> > around 180K/second - over a order of magnitude slower than what I was
>> > expecting (I'm sending files that are around 3MB in size). I'm running
>> > this on a new Macbook Pro - everything else is quite zippy.
>> >
>> > So - if I want speed I think there are two alternatives:
>> > 1) Someone will point out the magic combination of API calls to enable
>> > MTOM with my generated code - or
>> > 2) If this is just a client-side problem - perhaps I code up a
>> > OMElement interface on the client side to set the ENABLE_MTOM
>> > parameter to be TRUE?
>> >
>> > Other suggestions welcomed :-)
>> >
>> > Thanks...
>> >
>> > Sean
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: axis-user-unsubscribe@ws.apache.org
>> For additional commands, e-mail: axis-user-help@ws.apache.org
>>
>>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-user-help@ws.apache.org
Re: How to set MTOM options in WSDL-generated stubs?
Posted by Thilina Gunarathne <cs...@gmail.com>.
Hmm... I was working well for me... I'm even setting up a new sample
based on this..
If it's not working please reopen the JIRA... What is the data binding
mechanism you are using..
~Thilina
On 10/27/06, Michael Meire <mi...@cs.kuleuven.be> wrote:
> Hi,
>
> I've been spending some time on this issue a few times. I had submitted
> a axis2 bug report about that
> (http://issues.apache.org/jira/browse/AXIS2-513?page=all) and somewhere
> in August, a message was posted there that it is fixed.
> Today, I downloaded the latest nightly build, and tried it again,
> however without success.
> What I did was:
>
> * generate stubs and skeletons
> * Based on the explanation in the mtom guide, in the generated
> abcStub class, I added the following in the constructor:
> _serviceClient.getOptions().setProperty(org.apache.axis2.Constants.Configuration.ENABLE_MTOM,
> org.apache.axis2.Constants.VALUE_TRUE);
>
> However, still no MTOM is used...
>
> Did anybody experience more success on this?
>
> thanks,
> Michael...
>
>
>
> On 07/12/06 10:05, Sean Doyle wrote:
>
> > I've created a WSDL, run it through WSDL2Java, and I wrote some simple
> > JUnit tests that transfer files over the interface. But - now I'd like
> > to optimize the sending of the files in the client (on the server side
> > MTOM is enabled).
> >
> > From the example at http://ws.apache.org/axis2/1_0/mtom-guide.html I
> > see that I should set ENABLE_MTOM to true
> >
> > ServiceClient serviceClient = new ServiceClient ();
> >
> > Options options = new Options();
> > options.setTo(targetEPR);
> > options.setProperty(Constants.Configuration.ENABLE_MTOM, Constants.VALUE_TRUE);
> > serviceClient .setOptions(options);
> >
> > But - I don't see how to use this object on the stub files generated
> > by WSDL2Java. I can copy the code from the stub (basically the
> > contents of populateAxisService() to return a AxisService object,
> > create a new ServiceClient with the AxisService object, then set the
> > stub's ServiceClient to this new value.
> >
> > The net result is that everything works fine now but extremely slowly.
> > Sending between two processes on the same machine hits a limit of
> > around 180K/second - over a order of magnitude slower than what I was
> > expecting (I'm sending files that are around 3MB in size). I'm running
> > this on a new Macbook Pro - everything else is quite zippy.
> >
> > So - if I want speed I think there are two alternatives:
> > 1) Someone will point out the magic combination of API calls to enable
> > MTOM with my generated code - or
> > 2) If this is just a client-side problem - perhaps I code up a
> > OMElement interface on the client side to set the ENABLE_MTOM
> > parameter to be TRUE?
> >
> > Other suggestions welcomed :-)
> >
> > Thanks...
> >
> > Sean
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: axis-user-unsubscribe@ws.apache.org
> For additional commands, e-mail: axis-user-help@ws.apache.org
>
>
--
http://webservices.apache.org/~thilina/
http://thilinag.blogspot.com/
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-user-help@ws.apache.org