You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by Siovel Rodriguez <si...@gmail.com> on 2018/07/04 05:35:30 UTC
Problem with x264 compile
Hi, I am trying to install OpenMeetings 4.04 in Ubuntu 16.04, but
I have a problem with the script ffmpeg-ubuntu-debian.sh
In the lines:
cd x264-*/
PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build"
--bindir="$HOME/bin" --enable-static --disable-opencl &&
PATH="$HOME/bin:$PATH" make && sudo make install && make distclean; cd ..
The output is:
Found no assembler
Minimum version is nasm-2.13
If you really want to compile without asm, configure with --disable-asm.
what should I do? add --disable-asm option or is something that I lack for
the complication ?
Regards,
RE: Problem with x264 compile
Posted by aa...@gmail.com.
I have never had a problem just running the built ffmpeg out of the repository. The output below is from a clean server just to show which packages will be installed.
aahepp@ubuntu-server:~$ sudo apt-get install ffmpeg
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
libavdevice57 libsdl2-2.0-0
Suggested packages:
ffmpeg-doc
The following NEW packages will be installed:
ffmpeg libavdevice57 libsdl2-2.0-0
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 2,040 kB of archives.
After this operation, 3,824 kB of additional disk space will be used.
From: Siovel Rodriguez [mailto:siovelrm@gmail.com]
Sent: Wednesday, July 4, 2018 1:36 AM
To: user@openmeetings.apache.org
Subject: Problem with x264 compile
Hi, I am trying to install OpenMeetings 4.04 in Ubuntu 16.04, but
I have a problem with the script ffmpeg-ubuntu-debian.sh
In the lines:
cd x264-*/
PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-static --disable-opencl && PATH="$HOME/bin:$PATH" make && sudo make install && make distclean; cd ..
The output is:
Found no assembler
Minimum version is nasm-2.13
If you really want to compile without asm, configure with --disable-asm.
what should I do? add --disable-asm option or is something that I lack for the complication ?
Regards,
Re: Problem with x264 compile
Posted by Maxim Solodovnik <so...@gmail.com>.
Hello All,
ffmpeg compilation is required (otherwise mp4 conversion will not work
due to missing fdk-aac support)
According to x265 cloning: can you use some VPN? there are free VPNs
available, and there should not too much traffic ...
Alternatively you can manually download sources:
https://bitbucket.org/multicoreware/x265/downloads/
On Thu, Jul 5, 2018 at 5:43 PM <aa...@gmail.com> wrote:
>
> If you just install from the Ubuntu repository then you do not need to do the compile section in the instructions. Everything is already compiled in the installable package.
>
>
>
> From: Siovel Rodriguez [mailto:siovelrm@gmail.com]
> Sent: Wednesday, July 4, 2018 10:36 PM
> To: user@openmeetings.apache.org
> Subject: Re: Problem with x264 compile
>
>
>
> Hello Alvaro and Aaron.hepp, thanks for your answers. It is possible then that it could be because I am behind a proxy or because some URLs are blocked for Cuba. For example, this instruction in the script can not be executed either
> hg clone https://bitbucket.org/multicoreware/x265
>
> Is there any other variant to get x265?
>
> Greetings and many thanks
>
>
>
> El mié., 4 jul. 2018 a las 10:18, Alvaro (<zu...@gmail.com>) escribió:
>
> Right now i've finished compile ffmpeg
> on Ubuntu 16.04 following the tutorial
> that reference to ffmpeg-ubuntu-debian.sh
> script, and works as expected.
>
> This is without modify anything in the
> script.
>
>
>
> El mié, 04-07-2018 a las 01:35 -0400, Siovel Rodriguez escribió:
> > Hi, I am trying to install OpenMeetings 4.04 in Ubuntu 16.04, but
> > I have a problem with the script ffmpeg-ubuntu-debian.sh
> >
> > In the lines:
> > cd x264-*/
> > PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build" --
> > bindir="$HOME/bin" --enable-static --disable-opencl &&
> > PATH="$HOME/bin:$PATH" make && sudo make install && make distclean;
> > cd ..
> >
> > The output is:
> > Found no assembler
> > Minimum version is nasm-2.13
> > If you really want to compile without asm, configure with --disable-
> > asm.
> >
> > what should I do? add --disable-asm option or is something that I
> > lack for the complication ?
> >
> > Regards,
> >
> >
> >
> >
--
WBR
Maxim aka solomax
RE: Problem with x264 compile
Posted by aa...@gmail.com.
If you just install from the Ubuntu repository then you do not need to do the compile section in the instructions. Everything is already compiled in the installable package.
From: Siovel Rodriguez [mailto:siovelrm@gmail.com]
Sent: Wednesday, July 4, 2018 10:36 PM
To: user@openmeetings.apache.org
Subject: Re: Problem with x264 compile
Hello Alvaro and Aaron.hepp, thanks for your answers. It is possible then that it could be because I am behind a proxy or because some URLs are blocked for Cuba. For example, this instruction in the script can not be executed either
hg clone https://bitbucket.org/multicoreware/x265
Is there any other variant to get x265?
Greetings and many thanks
El mié., 4 jul. 2018 a las 10:18, Alvaro (<zurcamos@gmail.com <ma...@gmail.com> >) escribió:
Right now i've finished compile ffmpeg
on Ubuntu 16.04 following the tutorial
that reference to ffmpeg-ubuntu-debian.sh
script, and works as expected.
This is without modify anything in the
script.
El mié, 04-07-2018 a las 01:35 -0400, Siovel Rodriguez escribió:
> Hi, I am trying to install OpenMeetings 4.04 in Ubuntu 16.04, but
> I have a problem with the script ffmpeg-ubuntu-debian.sh
>
> In the lines:
> cd x264-*/
> PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build" --
> bindir="$HOME/bin" --enable-static --disable-opencl &&
> PATH="$HOME/bin:$PATH" make && sudo make install && make distclean;
> cd ..
>
> The output is:
> Found no assembler
> Minimum version is nasm-2.13
> If you really want to compile without asm, configure with --disable-
> asm.
>
> what should I do? add --disable-asm option or is something that I
> lack for the complication ?
>
> Regards,
>
>
>
>
Re: Problem with x264 compile
Posted by Siovel Rodriguez <si...@gmail.com>.
Hello Alvaro and Aaron.hepp, thanks for your answers. It is possible then
that it could be because I am behind a proxy or because some URLs are
blocked for Cuba. For example, this instruction in the script can not be
executed either
hg clone https://bitbucket.org/multicoreware/x265
Is there any other variant to get x265?
Greetings and many thanks
El mié., 4 jul. 2018 a las 10:18, Alvaro (<zu...@gmail.com>) escribió:
> Right now i've finished compile ffmpeg
> on Ubuntu 16.04 following the tutorial
> that reference to ffmpeg-ubuntu-debian.sh
> script, and works as expected.
>
> This is without modify anything in the
> script.
>
>
>
> El mié, 04-07-2018 a las 01:35 -0400, Siovel Rodriguez escribió:
> > Hi, I am trying to install OpenMeetings 4.04 in Ubuntu 16.04, but
> > I have a problem with the script ffmpeg-ubuntu-debian.sh
> >
> > In the lines:
> > cd x264-*/
> > PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build" --
> > bindir="$HOME/bin" --enable-static --disable-opencl &&
> > PATH="$HOME/bin:$PATH" make && sudo make install && make distclean;
> > cd ..
> >
> > The output is:
> > Found no assembler
> > Minimum version is nasm-2.13
> > If you really want to compile without asm, configure with --disable-
> > asm.
> >
> > what should I do? add --disable-asm option or is something that I
> > lack for the complication ?
> >
> > Regards,
> >
> >
> >
> >
>
Re: Problem with x264 compile
Posted by Alvaro <zu...@gmail.com>.
Right now i've finished compile ffmpeg
on Ubuntu 16.04 following the tutorial
that reference to ffmpeg-ubuntu-debian.sh
script, and works as expected.
This is without modify anything in the
script.
El mié, 04-07-2018 a las 01:35 -0400, Siovel Rodriguez escribió:
> Hi, I am trying to install OpenMeetings 4.04 in Ubuntu 16.04, but
> I have a problem with the script ffmpeg-ubuntu-debian.sh
>
> In the lines:
> cd x264-*/
> PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build" --
> bindir="$HOME/bin" --enable-static --disable-opencl &&
> PATH="$HOME/bin:$PATH" make && sudo make install && make distclean;
> cd ..
>
> The output is:
> Found no assembler
> Minimum version is nasm-2.13
> If you really want to compile without asm, configure with --disable-
> asm.
>
> what should I do? add --disable-asm option or is something that I
> lack for the complication ?
>
> Regards,
>
>
>
>