You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@zookeeper.apache.org by an...@apache.org on 2018/07/17 08:38:44 UTC
[04/10] zookeeper git commit: ZOOKEEPER-3033: branch-3.4 - MAVEN
MIGRATION - Step 1.2 - zk-recipes
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/e5b4b94d/zookeeper-recipes/lock/src/c/c-doc.Doxyfile
----------------------------------------------------------------------
diff --git a/zookeeper-recipes/lock/src/c/c-doc.Doxyfile b/zookeeper-recipes/lock/src/c/c-doc.Doxyfile
new file mode 100644
index 0000000..c56e86d
--- /dev/null
+++ b/zookeeper-recipes/lock/src/c/c-doc.Doxyfile
@@ -0,0 +1,1252 @@
+# Doxyfile 1.4.7
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME = $(PROJECT)-$(VERSION)
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = $(DOCDIR)
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
+# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
+# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
+# Swedish, and Ukrainian.
+
+OUTPUT_LANGUAGE = English
+
+# This tag can be used to specify the encoding used in the generated output.
+# The encoding is not always determined by the language that is chosen,
+# but also whether or not the output is meant for Windows or non-Windows users.
+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
+# forces the Windows encoding (this is the default for the Windows binary),
+# whereas setting the tag to NO uses a Unix-style encoding (the default for
+# all platforms other than Windows).
+
+USE_WINDOWS_ENCODING = NO
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like the Qt-style comments (thus requiring an
+# explicit @brief command for a brief description.
+
+JAVADOC_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member
+# documentation.
+
+DETAILS_AT_TOP = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for Java.
+# For instance, namespaces will be presented as packages, qualified scopes
+# will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
+# include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT = NO
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST = YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES = NO
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from the
+# version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = include/zoo_lock.h
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
+
+FILE_PATTERNS =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output. If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES (the default)
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES (the default)
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code. Otherwise they will link to the documentstion.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = $(GENERATE_HTML)
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = $(GENERATE_HTMLHELP)
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE = ../$(PROJECT).chm
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION = $(HHC_PATH)
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = $(GENERATE_CHI)
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE = 4
+
+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
+# generated containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = $(GENERATE_LATEX)
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = $(PAPER_SIZE)
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = $(GENERATE_PDF)
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = $(GENERATE_RTF)
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = $(GENERATE_MAN)
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = $(GENERATE_XML)
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE = $(DOCDIR)/$(PROJECT).tag
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS = YES
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = $(HAVE_DOT)
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a call dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a caller dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+
+CALLER_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH = $(DOT_PATH)
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_WIDTH = 1024
+
+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_HEIGHT = 1024
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that a graph may be further truncated if the graph's
+# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
+# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
+# the graph is not depth-constrained.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, which results in a white background.
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+
+DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be
+# used. If set to NO the values of all tags below this one will be ignored.
+
+SEARCHENGINE = NO
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/e5b4b94d/zookeeper-recipes/lock/src/c/configure.ac
----------------------------------------------------------------------
diff --git a/zookeeper-recipes/lock/src/c/configure.ac b/zookeeper-recipes/lock/src/c/configure.ac
new file mode 100644
index 0000000..3954123
--- /dev/null
+++ b/zookeeper-recipes/lock/src/c/configure.ac
@@ -0,0 +1,82 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+
+AC_INIT([zoolock], [3.2.0])
+
+AC_CONFIG_SRCDIR([include/zoo_lock.h])
+
+PACKAGE=zoolock
+VERSION=1.0
+
+AC_SUBST(PACKAGE)
+AC_SUBST(VERSION)
+
+BUILD_PATH="`pwd`"
+
+# Checks for programs.
+AC_LANG_CPLUSPLUS
+
+AM_INIT_AUTOMAKE([-Wall foreign])
+# Checks for libraries.
+
+#initialize Doxygen support
+DX_HTML_FEATURE(ON)
+DX_CHM_FEATURE(OFF)
+DX_CHI_FEATURE(OFF)
+DX_MAN_FEATURE(OFF)
+DX_RTF_FEATURE(OFF)
+DX_XML_FEATURE(OFF)
+DX_PDF_FEATURE(OFF)
+DX_PS_FEATURE(OFF)
+DX_INIT_DOXYGEN([zookeeper-locks],[c-doc.Doxyfile],[docs])
+
+
+ZOOKEEPER_PATH=${BUILD_PATH}/../../../../../src/c
+ZOOKEEPER_LD=-L${BUILD_PATH}/../../../../../src/c\ -lzookeeper_mt
+
+AC_SUBST(ZOOKEEPER_PATH)
+AC_SUBST(ZOOKEEPER_LD)
+
+# Checks for header files.
+AC_HEADER_DIRENT
+AC_HEADER_STDC
+AC_CHECK_HEADERS([fcntl.h stdlib.h string.h sys/time.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_HEADER_STDBOOL
+AC_C_CONST
+AC_TYPE_UID_T
+AC_C_INLINE
+AC_TYPE_OFF_T
+AC_TYPE_SIZE_T
+AC_STRUCT_ST_BLOCKS
+AC_HEADER_TIME
+AC_C_VOLATILE
+AC_PROG_CC
+AC_PROG_LIBTOOL
+#check for cppunit
+AM_PATH_CPPUNIT(1.10.2)
+# Checks for library functions.
+AC_FUNC_UTIME_NULL
+AC_CHECK_FUNCS([gettimeofday memset mkdir rmdir strdup strerror strstr strtol strtoul strtoull utime])
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+AC_C_VOLATILE
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/e5b4b94d/zookeeper-recipes/lock/src/c/include/zoo_lock.h
----------------------------------------------------------------------
diff --git a/zookeeper-recipes/lock/src/c/include/zoo_lock.h b/zookeeper-recipes/lock/src/c/include/zoo_lock.h
new file mode 100644
index 0000000..5c06bbf
--- /dev/null
+++ b/zookeeper-recipes/lock/src/c/include/zoo_lock.h
@@ -0,0 +1,168 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef ZOOKEEPER_LOCK_H_
+#define ZOOKEEPER_LOCK_H_
+
+#include <zookeeper.h>
+#include <pthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/**
+ * \brief the call back function called on status change of lock
+ *
+ * the call back funtion is called with a rc of 0 if lock is acquired and
+ * with an rc of 1 if the lock is released
+ * \param rc the value to let us know if its locked or unlocked
+ * \param cbdata the callback data that we passed when initializing
+ * the zookeeper lock.
+ */
+
+typedef void (* zkr_lock_completion) (int rc, void* cbdata);
+
+/**
+ * \file zoo_lock.h
+ * \brief zookeeper recipe for locking and leader election.
+ * this api implements a writelock on a given path in zookeeper.
+ * this api can also be used for leader election.
+ */
+
+struct zkr_lock_mutex {
+ zhandle_t *zh;
+ char *path;
+ struct ACL_vector *acl;
+ char *id;
+ void *cbdata;
+ zkr_lock_completion completion;
+ pthread_mutex_t pmutex;
+ int isOwner;
+ char* ownerid;
+};
+
+typedef struct zkr_lock_mutex zkr_lock_mutex_t;
+
+
+/**
+ * \brief initializing a zookeeper lock.
+ *
+ * this method instantiates the zookeeper mutex lock.
+ * \param mutex the mutex to initialize
+ * \param zh the zookeeper handle to use
+ * \param path the path in zookeeper to use for locking
+ * \param acl the acls to use in zookeeper.
+ * \return return 0 if successful.
+ */
+ZOOAPI int zkr_lock_init(zkr_lock_mutex_t *mutex, zhandle_t* zh,
+ char* path, struct ACL_vector *acl);
+
+/**
+ * \brief initializing a zookeeper lock.
+ *
+ *
+ * this method instantiates the zookeeper mutex lock with
+ * a completion function.
+ *
+ * \param mutex the mutex to initialize
+ * \param zh the zookeeper handle to use
+ * \param path the path in zookeeper to use for locking
+ * \param acl the acls to use in zookeeper.
+ * \param completion the callback thats called when lock
+ * is acquired and released.
+ * \param cbdata the callback method is called with data
+ * \return return 0 if successful.
+ */
+ZOOAPI int zkr_lock_init_cb(zkr_lock_mutex_t *mutex, zhandle_t* zh,
+ char* path, struct ACL_vector *acl,
+ zkr_lock_completion completion, void* cbdata);
+
+/**
+ * \brief lock the zookeeper mutex
+ *
+ * this method tries locking the mutex
+ * \param mutex the zookeeper mutex
+ * \return return 0 if there is no error. check
+ * with zkr_lock_isowner() if you have the lock
+ */
+ZOOAPI int zkr_lock_lock(zkr_lock_mutex_t *mutex);
+
+/**
+ * \brief unlock the zookeeper mutex
+ *
+ * this method unlocks the zookeeper mutex
+ * \param mutex the zookeeper mutex
+ * \return return 0 if there is not error in executing unlock.
+ * else returns non zero
+ */
+ZOOAPI int zkr_lock_unlock(zkr_lock_mutex_t *mutex);
+
+/**
+ * \brief set the callback function for zookeeper mutex
+ *
+ * this method sets the callback for zookeeper mutex
+ * \param mutex the zookeeper mutex
+ * \param callback the call back completion function
+ */
+ZOOAPI void zkr_lock_setcallback(zkr_lock_mutex_t *mutex,
+ zkr_lock_completion completion);
+
+/**
+ * \brief get the callback function for zookeeper mutex
+ *
+ * this method gets the callback funtion for zookeeper mutex
+ * \param mutex the zookeeper mutex
+ * \return the lock completion function
+ */
+ZOOAPI zkr_lock_completion zkr_lock_getcallback(zkr_lock_mutex_t *mutex);
+
+/**
+ * \brief destroy the mutex
+ * this method free the mutex
+ * \param mutex destroy the zookepeer lock.
+ * \return return 0 if destroyed.
+ */
+ZOOAPI int zkr_lock_destroy(zkr_lock_mutex_t* mutex);
+
+/**
+ * \brief return the parent path this mutex is using
+ * this method returns the parent path
+ * \param mutex the mutex
+ * \return return the parent path
+ */
+ZOOAPI char* zkr_lock_getpath(zkr_lock_mutex_t *mutex);
+
+/**
+ * \brief return if this mutex is owner of the lock
+ * this method returns if its owner or not
+ * \param mutex the mutex
+ * \return return true if is owner and false if not
+ */
+ZOOAPI int zkr_lock_isowner(zkr_lock_mutex_t *mutex);
+
+/**
+ * \brief return the id for this mutex
+ * this mutex retunrns the id string
+ * \param mutex the mutex
+ * \return the id for this mutex
+ */
+ZOOAPI char* zkr_lock_getid(zkr_lock_mutex_t *mutex);
+
+#ifdef __cplusplus
+}
+#endif
+#endif //ZOOKEEPER_LOCK_H_
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/e5b4b94d/zookeeper-recipes/lock/src/c/src/zoo_lock.c
----------------------------------------------------------------------
diff --git a/zookeeper-recipes/lock/src/c/src/zoo_lock.c b/zookeeper-recipes/lock/src/c/src/zoo_lock.c
new file mode 100644
index 0000000..8a6d817
--- /dev/null
+++ b/zookeeper-recipes/lock/src/c/src/zoo_lock.c
@@ -0,0 +1,396 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifdef DLL_EXPORT
+#define USE_STATIC_LIB
+#endif
+
+#if defined(__CYGWIN__)
+#define USE_IPV6
+#endif
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <zookeeper_log.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <limits.h>
+#include <zoo_lock.h>
+#include <stdbool.h>
+#ifdef HAVE_SYS_UTSNAME_H
+#include <sys/utsname.h>
+#endif
+
+#ifdef HAVE_GETPWUID_R
+#include <pwd.h>
+#endif
+
+#define IF_DEBUG(x) if (logLevel==ZOO_LOG_LEVEL_DEBUG) {x;}
+
+
+ZOOAPI int zkr_lock_init(zkr_lock_mutex_t* mutex, zhandle_t* zh,
+ char* path, struct ACL_vector *acl) {
+ mutex->zh = zh;
+ mutex->path = path;
+ mutex->acl = acl;
+ mutex->completion = NULL;
+ mutex->cbdata = NULL;
+ mutex->id = NULL;
+ mutex->ownerid = NULL;
+ mutex->isOwner = 0;
+ pthread_mutex_init(&(mutex->pmutex), NULL);
+ return 0;
+}
+
+ZOOAPI int zkr_lock_init_cb(zkr_lock_mutex_t *mutex, zhandle_t* zh,
+ char *path, struct ACL_vector *acl,
+ zkr_lock_completion completion, void* cbdata) {
+ mutex->zh = zh;
+ mutex->path = path;
+ mutex->acl = acl;
+ mutex->completion = completion;
+ mutex->cbdata = cbdata;
+ mutex->isOwner = 0;
+ mutex->ownerid = NULL;
+ mutex->id = NULL;
+ pthread_mutex_init(&(mutex->pmutex), NULL);
+ return 0;
+}
+
+/**
+ * unlock the mutex
+ */
+ZOOAPI int zkr_lock_unlock(zkr_lock_mutex_t *mutex) {
+ pthread_mutex_lock(&(mutex->pmutex));
+ zhandle_t *zh = mutex->zh;
+ if (mutex->id != NULL) {
+ int len = strlen(mutex->path) + strlen(mutex->id) + 2;
+ char buf[len];
+ sprintf(buf, "%s/%s", mutex->path, mutex->id);
+ int ret = 0;
+ int count = 0;
+ struct timespec ts;
+ ts.tv_sec = 0;
+ ts.tv_nsec = (.5)*1000000;
+ ret = ZCONNECTIONLOSS;
+ while (ret == ZCONNECTIONLOSS && (count < 3)) {
+ ret = zoo_delete(zh, buf, -1);
+ if (ret == ZCONNECTIONLOSS) {
+ LOG_DEBUG(("connectionloss while deleting the node"));
+ nanosleep(&ts, 0);
+ count++;
+ }
+ }
+ if (ret == ZOK || ret == ZNONODE) {
+ zkr_lock_completion completion = mutex->completion;
+ if (completion != NULL) {
+ completion(1, mutex->cbdata);
+ }
+
+ free(mutex->id);
+ mutex->id = NULL;
+ pthread_mutex_unlock(&(mutex->pmutex));
+ return 0;
+ }
+ LOG_WARN(("not able to connect to server - giving up"));
+ pthread_mutex_unlock(&(mutex->pmutex));
+ return ZCONNECTIONLOSS;
+ }
+ pthread_mutex_unlock(&(mutex->pmutex));
+ return ZSYSTEMERROR;
+}
+
+static void free_String_vector(struct String_vector *v) {
+ if (v->data) {
+ int32_t i;
+ for (i=0; i<v->count; i++) {
+ free(v->data[i]);
+ }
+ free(v->data);
+ v->data = 0;
+ }
+}
+
+static int vstrcmp(const void* str1, const void* str2) {
+ const char **a = (const char**)str1;
+ const char **b = (const char**) str2;
+ return strcmp(strrchr(*a, '-')+1, strrchr(*b, '-')+1);
+}
+
+static void sort_children(struct String_vector *vector) {
+ qsort( vector->data, vector->count, sizeof(char*), &vstrcmp);
+}
+
+static char* child_floor(char **sorted_data, int len, char *element) {
+ char* ret = NULL;
+ int i =0;
+ for (i=0; i < len; i++) {
+ if (strcmp(sorted_data[i], element) < 0) {
+ ret = sorted_data[i];
+ }
+ }
+ return ret;
+}
+
+static void lock_watcher_fn(zhandle_t* zh, int type, int state,
+ const char* path, void *watcherCtx) {
+ //callback that we registered
+ //should be called
+ zkr_lock_lock((zkr_lock_mutex_t*) watcherCtx);
+}
+
+/**
+ * get the last name of the path
+ */
+static char* getName(char* str) {
+ char* name = strrchr(str, '/');
+ if (name == NULL)
+ return NULL;
+ return strdup(name + 1);
+}
+
+/**
+ * just a method to retry get children
+ */
+static int retry_getchildren(zhandle_t *zh, char* path, struct String_vector *vector,
+ struct timespec *ts, int retry) {
+ int ret = ZCONNECTIONLOSS;
+ int count = 0;
+ while (ret == ZCONNECTIONLOSS && count < retry) {
+ ret = zoo_get_children(zh, path, 0, vector);
+ if (ret == ZCONNECTIONLOSS) {
+ LOG_DEBUG(("connection loss to the server"));
+ nanosleep(ts, 0);
+ count++;
+ }
+ }
+ return ret;
+}
+
+/** see if our node already exists
+ * if it does then we dup the name and
+ * return it
+ */
+static char* lookupnode(struct String_vector *vector, char *prefix) {
+ char *ret = NULL;
+ if (vector->data) {
+ int i = 0;
+ for (i = 0; i < vector->count; i++) {
+ char* child = vector->data[i];
+ if (strncmp(prefix, child, strlen(prefix)) == 0) {
+ ret = strdup(child);
+ break;
+ }
+ }
+ }
+ return ret;
+}
+
+/** retry zoo_wexists
+ */
+static int retry_zoowexists(zhandle_t *zh, char* path, watcher_fn watcher, void* ctx,
+ struct Stat *stat, struct timespec *ts, int retry) {
+ int ret = ZCONNECTIONLOSS;
+ int count = 0;
+ while (ret == ZCONNECTIONLOSS && count < retry) {
+ ret = zoo_wexists(zh, path, watcher, ctx, stat);
+ if (ret == ZCONNECTIONLOSS) {
+ LOG_DEBUG(("connectionloss while setting watch on my predecessor"));
+ nanosleep(ts, 0);
+ count++;
+ }
+ }
+ return ret;
+}
+
+/**
+ * the main code that does the zookeeper leader
+ * election. this code creates its own ephemeral
+ * node on the given path and sees if its the first
+ * one on the list and claims to be a leader if and only
+ * if its the first one of children in the paretn path
+ */
+static int zkr_lock_operation(zkr_lock_mutex_t *mutex, struct timespec *ts) {
+ zhandle_t *zh = mutex->zh;
+ char *path = mutex->path;
+ char *id = mutex->id;
+ struct Stat stat;
+ char* owner_id = NULL;
+ int retry = 3;
+ do {
+ const clientid_t *cid = zoo_client_id(zh);
+ // get the session id
+ int64_t session = cid->client_id;
+ char prefix[30];
+ int ret = 0;
+#if defined(__x86_64__)
+ snprintf(prefix, 30, "x-%016lx-", session);
+#else
+ snprintf(prefix, 30, "x-%016llx-", session);
+#endif
+ struct String_vector vectorst;
+ vectorst.data = NULL;
+ vectorst.count = 0;
+ ret = ZCONNECTIONLOSS;
+ ret = retry_getchildren(zh, path, &vectorst, ts, retry);
+ if (ret != ZOK)
+ return ret;
+ struct String_vector *vector = &vectorst;
+ mutex->id = lookupnode(vector, prefix);
+ free_String_vector(vector);
+ if (mutex->id == NULL) {
+ int len = strlen(path) + strlen(prefix) + 2;
+ char buf[len];
+ char retbuf[len+20];
+ snprintf(buf, len, "%s/%s", path, prefix);
+ ret = ZCONNECTIONLOSS;
+ ret = zoo_create(zh, buf, NULL, 0, mutex->acl,
+ ZOO_EPHEMERAL|ZOO_SEQUENCE, retbuf, (len+20));
+
+ // do not want to retry the create since
+ // we would end up creating more than one child
+ if (ret != ZOK) {
+ LOG_WARN(("could not create zoo node %s", buf));
+ return ret;
+ }
+ mutex->id = getName(retbuf);
+ }
+
+ if (mutex->id != NULL) {
+ ret = ZCONNECTIONLOSS;
+ ret = retry_getchildren(zh, path, vector, ts, retry);
+ if (ret != ZOK) {
+ LOG_WARN(("could not connect to server"));
+ return ret;
+ }
+ //sort this list
+ sort_children(vector);
+ owner_id = vector->data[0];
+ mutex->ownerid = strdup(owner_id);
+ id = mutex->id;
+ char* lessthanme = child_floor(vector->data, vector->count, id);
+ if (lessthanme != NULL) {
+ int flen = strlen(mutex->path) + strlen(lessthanme) + 2;
+ char last_child[flen];
+ sprintf(last_child, "%s/%s",mutex->path, lessthanme);
+ ret = ZCONNECTIONLOSS;
+ ret = retry_zoowexists(zh, last_child, &lock_watcher_fn, mutex,
+ &stat, ts, retry);
+ // cannot watch my predecessor i am giving up
+ // we need to be able to watch the predecessor
+ // since if we do not become a leader the others
+ // will keep waiting
+ if (ret != ZOK) {
+ free_String_vector(vector);
+ LOG_WARN(("unable to watch my predecessor"));
+ ret = zkr_lock_unlock(mutex);
+ while (ret == 0) {
+ //we have to give up our leadership
+ // since we cannot watch out predecessor
+ ret = zkr_lock_unlock(mutex);
+ }
+ return ret;
+ }
+ // we are not the owner of the lock
+ mutex->isOwner = 0;
+ }
+ else {
+ // this is the case when we are the owner
+ // of the lock
+ if (strcmp(mutex->id, owner_id) == 0) {
+ LOG_DEBUG(("got the zoo lock owner - %s", mutex->id));
+ mutex->isOwner = 1;
+ if (mutex->completion != NULL) {
+ mutex->completion(0, mutex->cbdata);
+ }
+ return ZOK;
+ }
+ }
+ free_String_vector(vector);
+ return ZOK;
+ }
+ } while (mutex->id == NULL);
+ return ZOK;
+}
+
+ZOOAPI int zkr_lock_lock(zkr_lock_mutex_t *mutex) {
+ pthread_mutex_lock(&(mutex->pmutex));
+ zhandle_t *zh = mutex->zh;
+ char *path = mutex->path;
+ struct Stat stat;
+ int exists = zoo_exists(zh, path, 0, &stat);
+ int count = 0;
+ struct timespec ts;
+ ts.tv_sec = 0;
+ ts.tv_nsec = (.5)*1000000;
+ // retry to see if the path exists and
+ // and create if the path does not exist
+ while ((exists == ZCONNECTIONLOSS || exists == ZNONODE) && (count <4)) {
+ count++;
+ // retry the operation
+ if (exists == ZCONNECTIONLOSS)
+ exists = zoo_exists(zh, path, 0, &stat);
+ else if (exists == ZNONODE)
+ exists = zoo_create(zh, path, NULL, 0, mutex->acl, 0, NULL, 0);
+ nanosleep(&ts, 0);
+
+ }
+
+ // need to check if we cannot still access the server
+ int check_retry = ZCONNECTIONLOSS;
+ count = 0;
+ while (check_retry != ZOK && count <4) {
+ check_retry = zkr_lock_operation(mutex, &ts);
+ if (check_retry != ZOK) {
+ nanosleep(&ts, 0);
+ count++;
+ }
+ }
+ pthread_mutex_unlock(&(mutex->pmutex));
+ return zkr_lock_isowner(mutex);
+}
+
+
+ZOOAPI char* zkr_lock_getpath(zkr_lock_mutex_t *mutex) {
+ return mutex->path;
+}
+
+ZOOAPI int zkr_lock_isowner(zkr_lock_mutex_t *mutex) {
+ return (mutex->id != NULL && mutex->ownerid != NULL
+ && (strcmp(mutex->id, mutex->ownerid) == 0));
+}
+
+ZOOAPI char* zkr_lock_getid(zkr_lock_mutex_t *mutex) {
+ return mutex->ownerid;
+}
+
+ZOOAPI int zkr_lock_destroy(zkr_lock_mutex_t* mutex) {
+ if (mutex->id)
+ free(mutex->id);
+ mutex->path = NULL;
+ mutex->acl = NULL;
+ mutex->completion = NULL;
+ pthread_mutex_destroy(&(mutex->pmutex));
+ mutex->isOwner = 0;
+ if (mutex->ownerid)
+ free(mutex->ownerid);
+ return 0;
+}
+
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/e5b4b94d/zookeeper-recipes/lock/src/c/tests/TestClient.cc
----------------------------------------------------------------------
diff --git a/zookeeper-recipes/lock/src/c/tests/TestClient.cc b/zookeeper-recipes/lock/src/c/tests/TestClient.cc
new file mode 100644
index 0000000..2cc56cf
--- /dev/null
+++ b/zookeeper-recipes/lock/src/c/tests/TestClient.cc
@@ -0,0 +1,201 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <cppunit/extensions/HelperMacros.h>
+
+#include <stdlib.h>
+#include <sys/select.h>
+#include <cppunit/TestAssert.h>
+
+
+using namespace std;
+
+#include <cstring>
+#include <list>
+
+#include <zookeeper.h>
+#include <zoo_lock.h>
+
+static void yield(zhandle_t *zh, int i)
+{
+ sleep(i);
+}
+
+typedef struct evt {
+ string path;
+ int type;
+} evt_t;
+
+typedef struct watchCtx {
+private:
+ list<evt_t> events;
+public:
+ bool connected;
+ zhandle_t *zh;
+
+ watchCtx() {
+ connected = false;
+ zh = 0;
+ }
+ ~watchCtx() {
+ if (zh) {
+ zookeeper_close(zh);
+ zh = 0;
+ }
+ }
+
+ evt_t getEvent() {
+ evt_t evt;
+ evt = events.front();
+ events.pop_front();
+ return evt;
+ }
+
+ int countEvents() {
+ int count;
+ count = events.size();
+ return count;
+ }
+
+ void putEvent(evt_t evt) {
+ events.push_back(evt);
+ }
+
+ bool waitForConnected(zhandle_t *zh) {
+ time_t expires = time(0) + 10;
+ while(!connected && time(0) < expires) {
+ yield(zh, 1);
+ }
+ return connected;
+ }
+ bool waitForDisconnected(zhandle_t *zh) {
+ time_t expires = time(0) + 15;
+ while(connected && time(0) < expires) {
+ yield(zh, 1);
+ }
+ return !connected;
+ }
+} watchctx_t;
+
+class Zookeeper_locktest : public CPPUNIT_NS::TestFixture
+{
+ CPPUNIT_TEST_SUITE(Zookeeper_locktest);
+ CPPUNIT_TEST(testlock);
+ CPPUNIT_TEST_SUITE_END();
+
+ static void watcher(zhandle_t *, int type, int state, const char *path,void*v){
+ watchctx_t *ctx = (watchctx_t*)v;
+
+ if (state == ZOO_CONNECTED_STATE) {
+ ctx->connected = true;
+ } else {
+ ctx->connected = false;
+ }
+ if (type != ZOO_SESSION_EVENT) {
+ evt_t evt;
+ evt.path = path;
+ evt.type = type;
+ ctx->putEvent(evt);
+ }
+ }
+
+ static const char hostPorts[];
+
+ const char *getHostPorts() {
+ return hostPorts;
+ }
+
+ zhandle_t *createClient(watchctx_t *ctx) {
+ zhandle_t *zk = zookeeper_init(hostPorts, watcher, 10000, 0,
+ ctx, 0);
+ ctx->zh = zk;
+ sleep(1);
+ return zk;
+ }
+
+public:
+
+#define ZKSERVER_CMD "./tests/zkServer.sh"
+
+ void setUp()
+ {
+ char cmd[1024];
+ sprintf(cmd, "%s startClean %s", ZKSERVER_CMD, getHostPorts());
+ CPPUNIT_ASSERT(system(cmd) == 0);
+ }
+
+
+ void startServer() {
+ char cmd[1024];
+ sprintf(cmd, "%s start %s", ZKSERVER_CMD, getHostPorts());
+ CPPUNIT_ASSERT(system(cmd) == 0);
+ }
+
+ void stopServer() {
+ tearDown();
+ }
+
+ void tearDown()
+ {
+ char cmd[1024];
+ sprintf(cmd, "%s stop %s", ZKSERVER_CMD, getHostPorts());
+ CPPUNIT_ASSERT(system(cmd) == 0);
+ }
+
+
+ void testlock()
+ {
+ watchctx_t ctx;
+ int rc;
+ struct Stat stat;
+ char buf[1024];
+ int blen;
+ struct String_vector strings;
+ const char *testName;
+ zkr_lock_mutex_t mutexes[3];
+ int count = 3;
+ int i = 0;
+ char* path = "/test-lock";
+ for (i=0; i< 3; i++) {
+ zhandle_t *zh = createClient(&ctx);
+ zkr_lock_init(&mutexes[i], zh, path, &ZOO_OPEN_ACL_UNSAFE);
+ zkr_lock_lock(&mutexes[i]);
+ }
+ sleep(30);
+ zkr_lock_mutex leader = mutexes[0];
+ zkr_lock_mutex mutex;
+ int ret = strcmp(leader.id, leader.ownerid);
+ CPPUNIT_ASSERT(ret == 0);
+ for(i=1; i < count; i++) {
+ mutex = mutexes[i];
+ CPPUNIT_ASSERT(strcmp(mutex.id, mutex.ownerid) != 0);
+ }
+ zkr_lock_unlock(&leader);
+ sleep(30);
+ zkr_lock_mutex secondleader = mutexes[1];
+ CPPUNIT_ASSERT(strcmp(secondleader.id , secondleader.ownerid) == 0);
+ for (i=2; i<count; i++) {
+ mutex = mutexes[i];
+ CPPUNIT_ASSERT(strcmp(mutex.id, mutex.ownerid) != 0);
+ }
+ }
+
+};
+
+const char Zookeeper_locktest::hostPorts[] = "127.0.0.1:22181";
+CPPUNIT_TEST_SUITE_REGISTRATION(Zookeeper_locktest);
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/e5b4b94d/zookeeper-recipes/lock/src/c/tests/TestDriver.cc
----------------------------------------------------------------------
diff --git a/zookeeper-recipes/lock/src/c/tests/TestDriver.cc b/zookeeper-recipes/lock/src/c/tests/TestDriver.cc
new file mode 100644
index 0000000..2b818f4
--- /dev/null
+++ b/zookeeper-recipes/lock/src/c/tests/TestDriver.cc
@@ -0,0 +1,114 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <string>
+#include <cppunit/TestRunner.h>
+#include <cppunit/CompilerOutputter.h>
+#include <cppunit/TestResult.h>
+#include <cppunit/TestResultCollector.h>
+#include <cppunit/TextTestProgressListener.h>
+#include <cppunit/BriefTestProgressListener.h>
+#include <cppunit/extensions/TestFactoryRegistry.h>
+#include <stdexcept>
+#include <cppunit/Exception.h>
+#include <cppunit/TestFailure.h>
+#include <cppunit/XmlOutputter.h>
+#include <fstream>
+
+#include "Util.h"
+
+using namespace std;
+
+CPPUNIT_NS_BEGIN
+
+class EclipseOutputter: public CompilerOutputter
+{
+public:
+ EclipseOutputter(TestResultCollector *result,ostream &stream):
+ CompilerOutputter(result,stream,"%p:%l: "),stream_(stream)
+ {
+ }
+ virtual void printFailedTestName( TestFailure *failure ){}
+ virtual void printFailureMessage( TestFailure *failure )
+ {
+ stream_<<": ";
+ Message msg = failure->thrownException()->message();
+ stream_<< msg.shortDescription();
+
+ string text;
+ for(int i=0; i<msg.detailCount();i++){
+ text+=msg.detailAt(i);
+ if(i+1!=msg.detailCount())
+ text+=", ";
+ }
+ if(text.length()!=0)
+ stream_ <<" ["<<text<<"]";
+ stream_<<"\n";
+ }
+ ostream& stream_;
+};
+
+CPPUNIT_NS_END
+
+int main( int argc, char* argv[] ) {
+ // if command line contains "-ide" then this is the post build check
+ // => the output must be in the compiler error format.
+ //bool selfTest = (argc > 1) && (std::string("-ide") == argv[1]);
+ globalTestConfig.addConfigFromCmdLine(argc,argv);
+
+ // Create the event manager and test controller
+ CPPUNIT_NS::TestResult controller;
+ // Add a listener that colllects test result
+ CPPUNIT_NS::TestResultCollector result;
+ controller.addListener( &result );
+
+ // Add a listener that print dots as tests run.
+ // CPPUNIT_NS::TextTestProgressListener progress;
+ CPPUNIT_NS::BriefTestProgressListener progress;
+ controller.addListener( &progress );
+
+ CPPUNIT_NS::TestRunner runner;
+ runner.addTest( CPPUNIT_NS::TestFactoryRegistry::getRegistry().makeTest() );
+
+ try
+ {
+ cout << "Running " << globalTestConfig.getTestName();
+ runner.run( controller, globalTestConfig.getTestName());
+ cout<<endl;
+
+ // Print test in a compiler compatible format.
+ CPPUNIT_NS::EclipseOutputter outputter( &result,cout);
+ outputter.write();
+
+ // Uncomment this for XML output
+#ifdef ENABLE_XML_OUTPUT
+ std::ofstream file( "tests.xml" );
+ CPPUNIT_NS::XmlOutputter xml( &result, file );
+ xml.setStyleSheet( "report.xsl" );
+ xml.write();
+ file.close();
+#endif
+ }
+ catch ( std::invalid_argument &e ) // Test path not resolved
+ {
+ cout<<"\nERROR: "<<e.what()<<endl;
+ return 0;
+ }
+
+ return result.wasSuccessful() ? 0 : 1;
+ }
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/e5b4b94d/zookeeper-recipes/lock/src/c/tests/Util.cc
----------------------------------------------------------------------
diff --git a/zookeeper-recipes/lock/src/c/tests/Util.cc b/zookeeper-recipes/lock/src/c/tests/Util.cc
new file mode 100644
index 0000000..26a9a09
--- /dev/null
+++ b/zookeeper-recipes/lock/src/c/tests/Util.cc
@@ -0,0 +1,30 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "Util.h"
+
+const std::string EMPTY_STRING;
+
+TestConfig globalTestConfig;
+
+void millisleep(int ms){
+ timespec ts;
+ ts.tv_sec=ms/1000;
+ ts.tv_nsec=(ms%1000)*1000000; // to nanoseconds
+ nanosleep(&ts,0);
+}
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/e5b4b94d/zookeeper-recipes/lock/src/c/tests/Util.h
----------------------------------------------------------------------
diff --git a/zookeeper-recipes/lock/src/c/tests/Util.h b/zookeeper-recipes/lock/src/c/tests/Util.h
new file mode 100644
index 0000000..95f5420
--- /dev/null
+++ b/zookeeper-recipes/lock/src/c/tests/Util.h
@@ -0,0 +1,134 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef UTIL_H_
+#define UTIL_H_
+
+#include <map>
+#include <vector>
+#include <string>
+
+// number of elements in array
+#define COUNTOF(array) sizeof(array)/sizeof(array[0])
+
+#define DECLARE_WRAPPER(ret,sym,sig) \
+ extern "C" ret __real_##sym sig; \
+ extern "C" ret __wrap_##sym sig
+
+#define CALL_REAL(sym,params) \
+ __real_##sym params
+
+// must include "src/zookeeper_log.h" to be able to use this macro
+#define TEST_TRACE(x) \
+ log_message(3,__LINE__,__func__,format_log_message x)
+
+extern const std::string EMPTY_STRING;
+
+// *****************************************************************************
+// A bit of wizardry to get to the bare type from a reference or a pointer
+// to the type
+template <class T>
+struct TypeOp {
+ typedef T BareT;
+ typedef T ArgT;
+};
+
+// partial specialization for reference types
+template <class T>
+struct TypeOp<T&>{
+ typedef T& ArgT;
+ typedef typename TypeOp<T>::BareT BareT;
+};
+
+// partial specialization for pointers
+template <class T>
+struct TypeOp<T*>{
+ typedef T* ArgT;
+ typedef typename TypeOp<T>::BareT BareT;
+};
+
+// *****************************************************************************
+// Container utilities
+
+template <class K, class V>
+void putValue(std::map<K,V>& map,const K& k, const V& v){
+ typedef std::map<K,V> Map;
+ typename Map::const_iterator it=map.find(k);
+ if(it==map.end())
+ map.insert(typename Map::value_type(k,v));
+ else
+ map[k]=v;
+}
+
+template <class K, class V>
+bool getValue(const std::map<K,V>& map,const K& k,V& v){
+ typedef std::map<K,V> Map;
+ typename Map::const_iterator it=map.find(k);
+ if(it==map.end())
+ return false;
+ v=it->second;
+ return true;
+}
+
+// *****************************************************************************
+// misc utils
+
+// millisecond sleep
+void millisleep(int ms);
+// evaluate given predicate until it returns true or the timeout
+// (in millis) has expired
+template<class Predicate>
+int ensureCondition(const Predicate& p,int timeout){
+ int elapsed=0;
+ while(!p() && elapsed<timeout){
+ millisleep(2);
+ elapsed+=2;
+ }
+ return elapsed;
+};
+
+// *****************************************************************************
+// test global configuration data
+class TestConfig{
+ typedef std::vector<std::string> CmdLineOptList;
+public:
+ typedef CmdLineOptList::const_iterator const_iterator;
+ TestConfig(){}
+ ~TestConfig(){}
+ void addConfigFromCmdLine(int argc, char* argv[]){
+ if(argc>=2)
+ testName_=argv[1];
+ for(int i=2; i<argc;++i)
+ cmdOpts_.push_back(argv[i]);
+ }
+ const_iterator getExtraOptBegin() const {return cmdOpts_.begin();}
+ const_iterator getExtraOptEnd() const {return cmdOpts_.end();}
+ size_t getExtraOptCount() const {
+ return cmdOpts_.size();
+ }
+ const std::string& getTestName() const {
+ return testName_=="all"?EMPTY_STRING:testName_;
+ }
+private:
+ CmdLineOptList cmdOpts_;
+ std::string testName_;
+};
+
+extern TestConfig globalTestConfig;
+
+#endif /*UTIL_H_*/