You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@airflow.apache.org by Chris Riccomini <cr...@apache.org> on 2017/12/15 22:30:31 UTC

[VOTE] Airflow 1.9.0rc8

Hey all,

(Last time, I hope)^2

I have cut Airflow 1.9.0 RC8. This email is calling a vote on the release,
which will last for 72 hours. Consider this my (binding) +1.

Airflow 1.9.0 RC8 is available at:

https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/

apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source release that
comes with INSTALL instructions.
apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python "sdist"
release.

Public keys are available at:

https://dist.apache.org/repos/dist/release/incubator/airflow/

The release contains no new JIRAs. Just a version fix.

I also had to change the version number to exclude the `rc6` string as well
as the "+incubating" string, so it's now simply 1.9.0. This will allow us
to rename the artifact without modifying the artifact checksums when we
actually release.

See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email for
full list).

Cheers,
Chris

Re: [VOTE] Airflow 1.9.0rc8

Posted by Chris Riccomini <cr...@apache.org>.
I believe so, yes.

I will proceed with release. :)

On Mon, Dec 18, 2017 at 11:20 AM, Bolke de Bruin <bd...@gmail.com> wrote:

> But it doesn’t stop us from releasing now right? You can just update the
> tag. It is not connected to the artifacts.
>
> Bolke.
>
> Sent from my iPhone
>
> > On 18 Dec 2017, at 18:51, Chris Riccomini <cr...@apache.org> wrote:
> >
> > https://github.com/apache/incubator-airflow/pull/2889
> >
> > On Mon, Dec 18, 2017 at 9:44 AM, Chris Riccomini <cr...@apache.org>
> > wrote:
> >
> >> Sigh. There's a catch 22 here. If we tag an RC as 1.9.0, we'll have to
> >> keep editing the tag every time there's a new RC. I agree that removing
> the
> >> check seems like the best course of action.
> >>
> >> On Sun, Dec 17, 2017 at 12:01 AM, Bolke de Bruin <bd...@gmail.com>
> >> wrote:
> >>
> >>> This is just matter of setting the tag in the repo right?
> >>>
> >>> We should remove that check or make it not fail at least. It is
> >>> ridiculous.
> >>>
> >>> B.
> >>>
> >>> Verstuurd vanaf mijn iPad
> >>>
> >>>> Op 17 dec. 2017 om 07:32 heeft Joy Gao <jo...@wepay.com> het volgende
> >>> geschreven:
> >>>>
> >>>> Ahh, tested the build on a fresh virtualenv, which succeeded *the
> first
> >>>> time* given gitpython was not installed and it skipped the assertion
> >>> check
> >>>> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
> >>> setup.py#L68-L73>.
> >>>> Build fails on re-installs :(
> >>>>
> >>>>> On Fri, Dec 15, 2017 at 6:01 PM, Feng Lu <fe...@google.com.invalid>
> >>> wrote:
> >>>>>
> >>>>> +0.5 (non-binding)
> >>>>>
> >>>>> Looks like the version(1.9.0) and tag(1.9.0rc8) is mismatched,
> >>>>> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
> >>> setup.py#L87>
> >>>>> which will cause the installation (pip install or python setup) to
> >>> error
> >>>>> out and fail.
> >>>>> nit: mind also updating the release log "
> >>>>> https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
> >>> CHANGELOG.txt"
> >>>>>
> >>>>>
> >>>>> On Fri, Dec 15, 2017 at 3:21 PM, Driesprong, Fokko
> >>> <fo...@driesprong.frl>
> >>>>> wrote:
> >>>>>
> >>>>>> +1 binding
> >>>>>>
> >>>>>> Op vr 15 dec. 2017 om 23:39 schreef Bolke de Bruin <
> bdbruin@gmail.com
> >>>>
> >>>>>>
> >>>>>>> +1, binding
> >>>>>>>
> >>>>>>> Checked sigs, version, source is there (did not check build), bin
> is
> >>>>>> there.
> >>>>>>>
> >>>>>>> Bolke
> >>>>>>>
> >>>>>>> Verstuurd vanaf mijn iPad
> >>>>>>>
> >>>>>>>> Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het
> >>> volgende
> >>>>>>> geschreven:
> >>>>>>>>
> >>>>>>>> +1, binding
> >>>>>>>>
> >>>>>>>> Thank you Chris!
> >>>>>>>>
> >>>>>>>> On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <
> >>>>>> criccomini@apache.org>
> >>>>>>>> wrote:
> >>>>>>>>
> >>>>>>>>> Hey all,
> >>>>>>>>>
> >>>>>>>>> (Last time, I hope)^2
> >>>>>>>>>
> >>>>>>>>> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
> >>>>>>> release,
> >>>>>>>>> which will last for 72 hours. Consider this my (binding) +1.
> >>>>>>>>>
> >>>>>>>>> Airflow 1.9.0 RC8 is available at:
> >>>>>>>>>
> >>>>>>>>> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.
> 9.0rc8/
> >>>>>>>>>
> >>>>>>>>> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source
> >>>>> release
> >>>>>>> that
> >>>>>>>>> comes with INSTALL instructions.
> >>>>>>>>> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary
> Python
> >>>>>>> "sdist"
> >>>>>>>>> release.
> >>>>>>>>>
> >>>>>>>>> Public keys are available at:
> >>>>>>>>>
> >>>>>>>>> https://dist.apache.org/repos/dist/release/incubator/airflow/
> >>>>>>>>>
> >>>>>>>>> The release contains no new JIRAs. Just a version fix.
> >>>>>>>>>
> >>>>>>>>> I also had to change the version number to exclude the `rc6`
> string
> >>>>> as
> >>>>>>> well
> >>>>>>>>> as the "+incubating" string, so it's now simply 1.9.0. This will
> >>>>> allow
> >>>>>>> us
> >>>>>>>>> to rename the artifact without modifying the artifact checksums
> >>> when
> >>>>>> we
> >>>>>>>>> actually release.
> >>>>>>>>>
> >>>>>>>>> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE
> email
> >>>>>> for
> >>>>>>>>> full list).
> >>>>>>>>>
> >>>>>>>>> Cheers,
> >>>>>>>>> Chris
> >>>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>
> >>>
> >>
> >>
>

Re: [VOTE] Airflow 1.9.0rc8

Posted by Bolke de Bruin <bd...@gmail.com>.
But it doesn’t stop us from releasing now right? You can just update the tag. It is not connected to the artifacts. 

Bolke. 

Sent from my iPhone

> On 18 Dec 2017, at 18:51, Chris Riccomini <cr...@apache.org> wrote:
> 
> https://github.com/apache/incubator-airflow/pull/2889
> 
> On Mon, Dec 18, 2017 at 9:44 AM, Chris Riccomini <cr...@apache.org>
> wrote:
> 
>> Sigh. There's a catch 22 here. If we tag an RC as 1.9.0, we'll have to
>> keep editing the tag every time there's a new RC. I agree that removing the
>> check seems like the best course of action.
>> 
>> On Sun, Dec 17, 2017 at 12:01 AM, Bolke de Bruin <bd...@gmail.com>
>> wrote:
>> 
>>> This is just matter of setting the tag in the repo right?
>>> 
>>> We should remove that check or make it not fail at least. It is
>>> ridiculous.
>>> 
>>> B.
>>> 
>>> Verstuurd vanaf mijn iPad
>>> 
>>>> Op 17 dec. 2017 om 07:32 heeft Joy Gao <jo...@wepay.com> het volgende
>>> geschreven:
>>>> 
>>>> Ahh, tested the build on a fresh virtualenv, which succeeded *the first
>>>> time* given gitpython was not installed and it skipped the assertion
>>> check
>>>> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
>>> setup.py#L68-L73>.
>>>> Build fails on re-installs :(
>>>> 
>>>>> On Fri, Dec 15, 2017 at 6:01 PM, Feng Lu <fe...@google.com.invalid>
>>> wrote:
>>>>> 
>>>>> +0.5 (non-binding)
>>>>> 
>>>>> Looks like the version(1.9.0) and tag(1.9.0rc8) is mismatched,
>>>>> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
>>> setup.py#L87>
>>>>> which will cause the installation (pip install or python setup) to
>>> error
>>>>> out and fail.
>>>>> nit: mind also updating the release log "
>>>>> https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
>>> CHANGELOG.txt"
>>>>> 
>>>>> 
>>>>> On Fri, Dec 15, 2017 at 3:21 PM, Driesprong, Fokko
>>> <fo...@driesprong.frl>
>>>>> wrote:
>>>>> 
>>>>>> +1 binding
>>>>>> 
>>>>>> Op vr 15 dec. 2017 om 23:39 schreef Bolke de Bruin <bdbruin@gmail.com
>>>> 
>>>>>> 
>>>>>>> +1, binding
>>>>>>> 
>>>>>>> Checked sigs, version, source is there (did not check build), bin is
>>>>>> there.
>>>>>>> 
>>>>>>> Bolke
>>>>>>> 
>>>>>>> Verstuurd vanaf mijn iPad
>>>>>>> 
>>>>>>>> Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het
>>> volgende
>>>>>>> geschreven:
>>>>>>>> 
>>>>>>>> +1, binding
>>>>>>>> 
>>>>>>>> Thank you Chris!
>>>>>>>> 
>>>>>>>> On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <
>>>>>> criccomini@apache.org>
>>>>>>>> wrote:
>>>>>>>> 
>>>>>>>>> Hey all,
>>>>>>>>> 
>>>>>>>>> (Last time, I hope)^2
>>>>>>>>> 
>>>>>>>>> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
>>>>>>> release,
>>>>>>>>> which will last for 72 hours. Consider this my (binding) +1.
>>>>>>>>> 
>>>>>>>>> Airflow 1.9.0 RC8 is available at:
>>>>>>>>> 
>>>>>>>>> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
>>>>>>>>> 
>>>>>>>>> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source
>>>>> release
>>>>>>> that
>>>>>>>>> comes with INSTALL instructions.
>>>>>>>>> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python
>>>>>>> "sdist"
>>>>>>>>> release.
>>>>>>>>> 
>>>>>>>>> Public keys are available at:
>>>>>>>>> 
>>>>>>>>> https://dist.apache.org/repos/dist/release/incubator/airflow/
>>>>>>>>> 
>>>>>>>>> The release contains no new JIRAs. Just a version fix.
>>>>>>>>> 
>>>>>>>>> I also had to change the version number to exclude the `rc6` string
>>>>> as
>>>>>>> well
>>>>>>>>> as the "+incubating" string, so it's now simply 1.9.0. This will
>>>>> allow
>>>>>>> us
>>>>>>>>> to rename the artifact without modifying the artifact checksums
>>> when
>>>>>> we
>>>>>>>>> actually release.
>>>>>>>>> 
>>>>>>>>> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email
>>>>>> for
>>>>>>>>> full list).
>>>>>>>>> 
>>>>>>>>> Cheers,
>>>>>>>>> Chris
>>>>>>>>> 
>>>>>>> 
>>>>>> 
>>>>> 
>>> 
>> 
>> 

Re: [VOTE] Airflow 1.9.0rc8

Posted by Chris Riccomini <cr...@apache.org>.
https://github.com/apache/incubator-airflow/pull/2889

On Mon, Dec 18, 2017 at 9:44 AM, Chris Riccomini <cr...@apache.org>
wrote:

> Sigh. There's a catch 22 here. If we tag an RC as 1.9.0, we'll have to
> keep editing the tag every time there's a new RC. I agree that removing the
> check seems like the best course of action.
>
> On Sun, Dec 17, 2017 at 12:01 AM, Bolke de Bruin <bd...@gmail.com>
> wrote:
>
>> This is just matter of setting the tag in the repo right?
>>
>> We should remove that check or make it not fail at least. It is
>> ridiculous.
>>
>> B.
>>
>> Verstuurd vanaf mijn iPad
>>
>> > Op 17 dec. 2017 om 07:32 heeft Joy Gao <jo...@wepay.com> het volgende
>> geschreven:
>> >
>> > Ahh, tested the build on a fresh virtualenv, which succeeded *the first
>> > time* given gitpython was not installed and it skipped the assertion
>> check
>> > <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
>> setup.py#L68-L73>.
>> > Build fails on re-installs :(
>> >
>> >> On Fri, Dec 15, 2017 at 6:01 PM, Feng Lu <fe...@google.com.invalid>
>> wrote:
>> >>
>> >> +0.5 (non-binding)
>> >>
>> >> Looks like the version(1.9.0) and tag(1.9.0rc8) is mismatched,
>> >> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
>> setup.py#L87>
>> >> which will cause the installation (pip install or python setup) to
>> error
>> >> out and fail.
>> >> nit: mind also updating the release log "
>> >> https://github.com/apache/incubator-airflow/blob/1.9.0rc8/
>> CHANGELOG.txt"
>> >>
>> >>
>> >> On Fri, Dec 15, 2017 at 3:21 PM, Driesprong, Fokko
>> <fo...@driesprong.frl>
>> >> wrote:
>> >>
>> >>> +1 binding
>> >>>
>> >>> Op vr 15 dec. 2017 om 23:39 schreef Bolke de Bruin <bdbruin@gmail.com
>> >
>> >>>
>> >>>> +1, binding
>> >>>>
>> >>>> Checked sigs, version, source is there (did not check build), bin is
>> >>> there.
>> >>>>
>> >>>> Bolke
>> >>>>
>> >>>> Verstuurd vanaf mijn iPad
>> >>>>
>> >>>>> Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het
>> volgende
>> >>>> geschreven:
>> >>>>>
>> >>>>> +1, binding
>> >>>>>
>> >>>>> Thank you Chris!
>> >>>>>
>> >>>>> On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <
>> >>> criccomini@apache.org>
>> >>>>> wrote:
>> >>>>>
>> >>>>>> Hey all,
>> >>>>>>
>> >>>>>> (Last time, I hope)^2
>> >>>>>>
>> >>>>>> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
>> >>>> release,
>> >>>>>> which will last for 72 hours. Consider this my (binding) +1.
>> >>>>>>
>> >>>>>> Airflow 1.9.0 RC8 is available at:
>> >>>>>>
>> >>>>>> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
>> >>>>>>
>> >>>>>> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source
>> >> release
>> >>>> that
>> >>>>>> comes with INSTALL instructions.
>> >>>>>> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python
>> >>>> "sdist"
>> >>>>>> release.
>> >>>>>>
>> >>>>>> Public keys are available at:
>> >>>>>>
>> >>>>>> https://dist.apache.org/repos/dist/release/incubator/airflow/
>> >>>>>>
>> >>>>>> The release contains no new JIRAs. Just a version fix.
>> >>>>>>
>> >>>>>> I also had to change the version number to exclude the `rc6` string
>> >> as
>> >>>> well
>> >>>>>> as the "+incubating" string, so it's now simply 1.9.0. This will
>> >> allow
>> >>>> us
>> >>>>>> to rename the artifact without modifying the artifact checksums
>> when
>> >>> we
>> >>>>>> actually release.
>> >>>>>>
>> >>>>>> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email
>> >>> for
>> >>>>>> full list).
>> >>>>>>
>> >>>>>> Cheers,
>> >>>>>> Chris
>> >>>>>>
>> >>>>
>> >>>
>> >>
>>
>
>

Re: [VOTE] Airflow 1.9.0rc8

Posted by Chris Riccomini <cr...@apache.org>.
Sigh. There's a catch 22 here. If we tag an RC as 1.9.0, we'll have to keep
editing the tag every time there's a new RC. I agree that removing the
check seems like the best course of action.

On Sun, Dec 17, 2017 at 12:01 AM, Bolke de Bruin <bd...@gmail.com> wrote:

> This is just matter of setting the tag in the repo right?
>
> We should remove that check or make it not fail at least. It is ridiculous.
>
> B.
>
> Verstuurd vanaf mijn iPad
>
> > Op 17 dec. 2017 om 07:32 heeft Joy Gao <jo...@wepay.com> het volgende
> geschreven:
> >
> > Ahh, tested the build on a fresh virtualenv, which succeeded *the first
> > time* given gitpython was not installed and it skipped the assertion
> check
> > <https://github.com/apache/incubator-airflow/blob/1.9.
> 0rc8/setup.py#L68-L73>.
> > Build fails on re-installs :(
> >
> >> On Fri, Dec 15, 2017 at 6:01 PM, Feng Lu <fe...@google.com.invalid>
> wrote:
> >>
> >> +0.5 (non-binding)
> >>
> >> Looks like the version(1.9.0) and tag(1.9.0rc8) is mismatched,
> >> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/setup.py#L87
> >
> >> which will cause the installation (pip install or python setup) to error
> >> out and fail.
> >> nit: mind also updating the release log "
> >> https://github.com/apache/incubator-airflow/blob/1.9.0rc8/CHANGELOG.txt
> "
> >>
> >>
> >> On Fri, Dec 15, 2017 at 3:21 PM, Driesprong, Fokko <fokko@driesprong.frl
> >
> >> wrote:
> >>
> >>> +1 binding
> >>>
> >>> Op vr 15 dec. 2017 om 23:39 schreef Bolke de Bruin <bd...@gmail.com>
> >>>
> >>>> +1, binding
> >>>>
> >>>> Checked sigs, version, source is there (did not check build), bin is
> >>> there.
> >>>>
> >>>> Bolke
> >>>>
> >>>> Verstuurd vanaf mijn iPad
> >>>>
> >>>>> Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het volgende
> >>>> geschreven:
> >>>>>
> >>>>> +1, binding
> >>>>>
> >>>>> Thank you Chris!
> >>>>>
> >>>>> On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <
> >>> criccomini@apache.org>
> >>>>> wrote:
> >>>>>
> >>>>>> Hey all,
> >>>>>>
> >>>>>> (Last time, I hope)^2
> >>>>>>
> >>>>>> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
> >>>> release,
> >>>>>> which will last for 72 hours. Consider this my (binding) +1.
> >>>>>>
> >>>>>> Airflow 1.9.0 RC8 is available at:
> >>>>>>
> >>>>>> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
> >>>>>>
> >>>>>> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source
> >> release
> >>>> that
> >>>>>> comes with INSTALL instructions.
> >>>>>> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python
> >>>> "sdist"
> >>>>>> release.
> >>>>>>
> >>>>>> Public keys are available at:
> >>>>>>
> >>>>>> https://dist.apache.org/repos/dist/release/incubator/airflow/
> >>>>>>
> >>>>>> The release contains no new JIRAs. Just a version fix.
> >>>>>>
> >>>>>> I also had to change the version number to exclude the `rc6` string
> >> as
> >>>> well
> >>>>>> as the "+incubating" string, so it's now simply 1.9.0. This will
> >> allow
> >>>> us
> >>>>>> to rename the artifact without modifying the artifact checksums when
> >>> we
> >>>>>> actually release.
> >>>>>>
> >>>>>> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email
> >>> for
> >>>>>> full list).
> >>>>>>
> >>>>>> Cheers,
> >>>>>> Chris
> >>>>>>
> >>>>
> >>>
> >>
>

Re: [VOTE] Airflow 1.9.0rc8

Posted by Bolke de Bruin <bd...@gmail.com>.
This is just matter of setting the tag in the repo right? 

We should remove that check or make it not fail at least. It is ridiculous. 

B.

Verstuurd vanaf mijn iPad

> Op 17 dec. 2017 om 07:32 heeft Joy Gao <jo...@wepay.com> het volgende geschreven:
> 
> Ahh, tested the build on a fresh virtualenv, which succeeded *the first
> time* given gitpython was not installed and it skipped the assertion check
> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/setup.py#L68-L73>.
> Build fails on re-installs :(
> 
>> On Fri, Dec 15, 2017 at 6:01 PM, Feng Lu <fe...@google.com.invalid> wrote:
>> 
>> +0.5 (non-binding)
>> 
>> Looks like the version(1.9.0) and tag(1.9.0rc8) is mismatched,
>> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/setup.py#L87>
>> which will cause the installation (pip install or python setup) to error
>> out and fail.
>> nit: mind also updating the release log "
>> https://github.com/apache/incubator-airflow/blob/1.9.0rc8/CHANGELOG.txt"
>> 
>> 
>> On Fri, Dec 15, 2017 at 3:21 PM, Driesprong, Fokko <fo...@driesprong.frl>
>> wrote:
>> 
>>> +1 binding
>>> 
>>> Op vr 15 dec. 2017 om 23:39 schreef Bolke de Bruin <bd...@gmail.com>
>>> 
>>>> +1, binding
>>>> 
>>>> Checked sigs, version, source is there (did not check build), bin is
>>> there.
>>>> 
>>>> Bolke
>>>> 
>>>> Verstuurd vanaf mijn iPad
>>>> 
>>>>> Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het volgende
>>>> geschreven:
>>>>> 
>>>>> +1, binding
>>>>> 
>>>>> Thank you Chris!
>>>>> 
>>>>> On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <
>>> criccomini@apache.org>
>>>>> wrote:
>>>>> 
>>>>>> Hey all,
>>>>>> 
>>>>>> (Last time, I hope)^2
>>>>>> 
>>>>>> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
>>>> release,
>>>>>> which will last for 72 hours. Consider this my (binding) +1.
>>>>>> 
>>>>>> Airflow 1.9.0 RC8 is available at:
>>>>>> 
>>>>>> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
>>>>>> 
>>>>>> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source
>> release
>>>> that
>>>>>> comes with INSTALL instructions.
>>>>>> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python
>>>> "sdist"
>>>>>> release.
>>>>>> 
>>>>>> Public keys are available at:
>>>>>> 
>>>>>> https://dist.apache.org/repos/dist/release/incubator/airflow/
>>>>>> 
>>>>>> The release contains no new JIRAs. Just a version fix.
>>>>>> 
>>>>>> I also had to change the version number to exclude the `rc6` string
>> as
>>>> well
>>>>>> as the "+incubating" string, so it's now simply 1.9.0. This will
>> allow
>>>> us
>>>>>> to rename the artifact without modifying the artifact checksums when
>>> we
>>>>>> actually release.
>>>>>> 
>>>>>> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email
>>> for
>>>>>> full list).
>>>>>> 
>>>>>> Cheers,
>>>>>> Chris
>>>>>> 
>>>> 
>>> 
>> 

Re: [VOTE] Airflow 1.9.0rc8

Posted by Joy Gao <jo...@wepay.com>.
Ahh, tested the build on a fresh virtualenv, which succeeded *the first
time* given gitpython was not installed and it skipped the assertion check
<https://github.com/apache/incubator-airflow/blob/1.9.0rc8/setup.py#L68-L73>.
Build fails on re-installs :(

On Fri, Dec 15, 2017 at 6:01 PM, Feng Lu <fe...@google.com.invalid> wrote:

> +0.5 (non-binding)
>
> Looks like the version(1.9.0) and tag(1.9.0rc8) is mismatched,
> <https://github.com/apache/incubator-airflow/blob/1.9.0rc8/setup.py#L87>
> which will cause the installation (pip install or python setup) to error
> out and fail.
> nit: mind also updating the release log "
> https://github.com/apache/incubator-airflow/blob/1.9.0rc8/CHANGELOG.txt"
>
>
> On Fri, Dec 15, 2017 at 3:21 PM, Driesprong, Fokko <fo...@driesprong.frl>
> wrote:
>
> > +1 binding
> >
> > Op vr 15 dec. 2017 om 23:39 schreef Bolke de Bruin <bd...@gmail.com>
> >
> > > +1, binding
> > >
> > > Checked sigs, version, source is there (did not check build), bin is
> > there.
> > >
> > > Bolke
> > >
> > > Verstuurd vanaf mijn iPad
> > >
> > > > Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het volgende
> > > geschreven:
> > > >
> > > > +1, binding
> > > >
> > > > Thank you Chris!
> > > >
> > > > On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <
> > criccomini@apache.org>
> > > > wrote:
> > > >
> > > >> Hey all,
> > > >>
> > > >> (Last time, I hope)^2
> > > >>
> > > >> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
> > > release,
> > > >> which will last for 72 hours. Consider this my (binding) +1.
> > > >>
> > > >> Airflow 1.9.0 RC8 is available at:
> > > >>
> > > >> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
> > > >>
> > > >> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source
> release
> > > that
> > > >> comes with INSTALL instructions.
> > > >> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python
> > > "sdist"
> > > >> release.
> > > >>
> > > >> Public keys are available at:
> > > >>
> > > >> https://dist.apache.org/repos/dist/release/incubator/airflow/
> > > >>
> > > >> The release contains no new JIRAs. Just a version fix.
> > > >>
> > > >> I also had to change the version number to exclude the `rc6` string
> as
> > > well
> > > >> as the "+incubating" string, so it's now simply 1.9.0. This will
> allow
> > > us
> > > >> to rename the artifact without modifying the artifact checksums when
> > we
> > > >> actually release.
> > > >>
> > > >> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email
> > for
> > > >> full list).
> > > >>
> > > >> Cheers,
> > > >> Chris
> > > >>
> > >
> >
>

Re: [VOTE] Airflow 1.9.0rc8

Posted by Feng Lu <fe...@google.com.INVALID>.
+0.5 (non-binding)

Looks like the version(1.9.0) and tag(1.9.0rc8) is mismatched,
<https://github.com/apache/incubator-airflow/blob/1.9.0rc8/setup.py#L87>
which will cause the installation (pip install or python setup) to error
out and fail.
nit: mind also updating the release log "
https://github.com/apache/incubator-airflow/blob/1.9.0rc8/CHANGELOG.txt"


On Fri, Dec 15, 2017 at 3:21 PM, Driesprong, Fokko <fo...@driesprong.frl>
wrote:

> +1 binding
>
> Op vr 15 dec. 2017 om 23:39 schreef Bolke de Bruin <bd...@gmail.com>
>
> > +1, binding
> >
> > Checked sigs, version, source is there (did not check build), bin is
> there.
> >
> > Bolke
> >
> > Verstuurd vanaf mijn iPad
> >
> > > Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het volgende
> > geschreven:
> > >
> > > +1, binding
> > >
> > > Thank you Chris!
> > >
> > > On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <
> criccomini@apache.org>
> > > wrote:
> > >
> > >> Hey all,
> > >>
> > >> (Last time, I hope)^2
> > >>
> > >> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
> > release,
> > >> which will last for 72 hours. Consider this my (binding) +1.
> > >>
> > >> Airflow 1.9.0 RC8 is available at:
> > >>
> > >> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
> > >>
> > >> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source release
> > that
> > >> comes with INSTALL instructions.
> > >> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python
> > "sdist"
> > >> release.
> > >>
> > >> Public keys are available at:
> > >>
> > >> https://dist.apache.org/repos/dist/release/incubator/airflow/
> > >>
> > >> The release contains no new JIRAs. Just a version fix.
> > >>
> > >> I also had to change the version number to exclude the `rc6` string as
> > well
> > >> as the "+incubating" string, so it's now simply 1.9.0. This will allow
> > us
> > >> to rename the artifact without modifying the artifact checksums when
> we
> > >> actually release.
> > >>
> > >> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email
> for
> > >> full list).
> > >>
> > >> Cheers,
> > >> Chris
> > >>
> >
>

Re: [VOTE] Airflow 1.9.0rc8

Posted by "Driesprong, Fokko" <fo...@driesprong.frl>.
+1 binding

Op vr 15 dec. 2017 om 23:39 schreef Bolke de Bruin <bd...@gmail.com>

> +1, binding
>
> Checked sigs, version, source is there (did not check build), bin is there.
>
> Bolke
>
> Verstuurd vanaf mijn iPad
>
> > Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het volgende
> geschreven:
> >
> > +1, binding
> >
> > Thank you Chris!
> >
> > On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <cr...@apache.org>
> > wrote:
> >
> >> Hey all,
> >>
> >> (Last time, I hope)^2
> >>
> >> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
> release,
> >> which will last for 72 hours. Consider this my (binding) +1.
> >>
> >> Airflow 1.9.0 RC8 is available at:
> >>
> >> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
> >>
> >> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source release
> that
> >> comes with INSTALL instructions.
> >> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python
> "sdist"
> >> release.
> >>
> >> Public keys are available at:
> >>
> >> https://dist.apache.org/repos/dist/release/incubator/airflow/
> >>
> >> The release contains no new JIRAs. Just a version fix.
> >>
> >> I also had to change the version number to exclude the `rc6` string as
> well
> >> as the "+incubating" string, so it's now simply 1.9.0. This will allow
> us
> >> to rename the artifact without modifying the artifact checksums when we
> >> actually release.
> >>
> >> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email for
> >> full list).
> >>
> >> Cheers,
> >> Chris
> >>
>

Re: [VOTE] Airflow 1.9.0rc8

Posted by Bolke de Bruin <bd...@gmail.com>.
+1, binding

Checked sigs, version, source is there (did not check build), bin is there.

Bolke

Verstuurd vanaf mijn iPad

> Op 15 dec. 2017 om 23:31 heeft Joy Gao <jo...@wepay.com> het volgende geschreven:
> 
> +1, binding
> 
> Thank you Chris!
> 
> On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <cr...@apache.org>
> wrote:
> 
>> Hey all,
>> 
>> (Last time, I hope)^2
>> 
>> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the release,
>> which will last for 72 hours. Consider this my (binding) +1.
>> 
>> Airflow 1.9.0 RC8 is available at:
>> 
>> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
>> 
>> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source release that
>> comes with INSTALL instructions.
>> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python "sdist"
>> release.
>> 
>> Public keys are available at:
>> 
>> https://dist.apache.org/repos/dist/release/incubator/airflow/
>> 
>> The release contains no new JIRAs. Just a version fix.
>> 
>> I also had to change the version number to exclude the `rc6` string as well
>> as the "+incubating" string, so it's now simply 1.9.0. This will allow us
>> to rename the artifact without modifying the artifact checksums when we
>> actually release.
>> 
>> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email for
>> full list).
>> 
>> Cheers,
>> Chris
>> 

Re: [VOTE] Airflow 1.9.0rc8

Posted by Maxime Beauchemin <ma...@gmail.com>.
+1, binding

On Fri, Dec 15, 2017 at 2:31 PM, Joy Gao <jo...@wepay.com> wrote:

> +1, binding
>
> Thank you Chris!
>
> On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <cr...@apache.org>
> wrote:
>
> > Hey all,
> >
> > (Last time, I hope)^2
> >
> > I have cut Airflow 1.9.0 RC8. This email is calling a vote on the
> release,
> > which will last for 72 hours. Consider this my (binding) +1.
> >
> > Airflow 1.9.0 RC8 is available at:
> >
> > https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
> >
> > apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source release
> that
> > comes with INSTALL instructions.
> > apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python
> "sdist"
> > release.
> >
> > Public keys are available at:
> >
> > https://dist.apache.org/repos/dist/release/incubator/airflow/
> >
> > The release contains no new JIRAs. Just a version fix.
> >
> > I also had to change the version number to exclude the `rc6` string as
> well
> > as the "+incubating" string, so it's now simply 1.9.0. This will allow us
> > to rename the artifact without modifying the artifact checksums when we
> > actually release.
> >
> > See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email for
> > full list).
> >
> > Cheers,
> > Chris
> >
>

Re: [VOTE] Airflow 1.9.0rc8

Posted by Joy Gao <jo...@wepay.com>.
+1, binding

Thank you Chris!

On Fri, Dec 15, 2017 at 2:30 PM, Chris Riccomini <cr...@apache.org>
wrote:

> Hey all,
>
> (Last time, I hope)^2
>
> I have cut Airflow 1.9.0 RC8. This email is calling a vote on the release,
> which will last for 72 hours. Consider this my (binding) +1.
>
> Airflow 1.9.0 RC8 is available at:
>
> https://dist.apache.org/repos/dist/dev/incubator/airflow/1.9.0rc8/
>
> apache-airflow-1.9.0rc8+incubating-source.tar.gz is a source release that
> comes with INSTALL instructions.
> apache-airflow-1.9.0rc8+incubating-bin.tar.gz is the binary Python "sdist"
> release.
>
> Public keys are available at:
>
> https://dist.apache.org/repos/dist/release/incubator/airflow/
>
> The release contains no new JIRAs. Just a version fix.
>
> I also had to change the version number to exclude the `rc6` string as well
> as the "+incubating" string, so it's now simply 1.9.0. This will allow us
> to rename the artifact without modifying the artifact checksums when we
> actually release.
>
> See JIRAs that were in 1.9.0RC7 and before (see previous VOTE email for
> full list).
>
> Cheers,
> Chris
>