You are viewing a plain text version of this content. The canonical link for it is here.
Posted to c-dev@axis.apache.org by "Diluka Moratuwage (JIRA)" <ji...@apache.org> on 2007/08/27 06:53:31 UTC
[jira] Created: (AXIS2C-681) Addressing information is not engaged
properly
Addressing information is not engaged properly
----------------------------------------------
Key: AXIS2C-681
URL: https://issues.apache.org/jira/browse/AXIS2C-681
Project: Axis2-C
Issue Type: Bug
Reporter: Diluka Moratuwage
In the out fault flow, addressing information can not be included. When the following change is done into the engine.c, addressing information can be sent back in the out fault flow. But its not the exact fault flow information, its only the addressing information.
AXIS2_EXTERN axis2_status_t AXIS2_CALL
axis2_engine_send_fault(
axis2_engine_t *engine,
const axutil_env_t *env,
axis2_msg_ctx_t *msg_ctx)
{
axis2_op_ctx_t *op_ctx = NULL;
axutil_array_list_t *phases = NULL;
AXIS2_ENV_CHECK(env, AXIS2_FAILURE);
AXIS2_PARAM_CHECK(env->error, msg_ctx, AXIS2_FAILURE);
op_ctx = axis2_msg_ctx_get_op_ctx(msg_ctx, env);
if (op_ctx)
{
axis2_op_t *op = axis2_op_ctx_get_op(op_ctx, env);
if (op)
{
phases = axis2_op_get_fault_out_flow(op, env);
}
}
if (!( axis2_msg_ctx_is_paused(msg_ctx, env)))
{
/* send the SOAP Fault*/
axis2_conf_ctx_t *conf_ctx = NULL;
axis2_transport_sender_t *transport_sender = NULL;
axis2_transport_out_desc_t *transport_out = NULL;
conf_ctx = axis2_msg_ctx_get_conf_ctx(msg_ctx, env);
if (conf_ctx)
{
/*axis2_conf_t *conf = axis2_conf_ctx_get_conf(conf_ctx, env);
if (conf)
{
axutil_array_list_t *phases =
axis2_conf_get_out_fault_flow(conf, env); */
if (phases)
{
axis2_engine_invoke_phases(engine, env, phases, msg_ctx);
}
/* }*/
}
--
This message is automatically generated by JIRA.
-
You can reply to this email to add a comment to the issue online.
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-dev-help@ws.apache.org
[jira] Updated: (AXIS2C-681) Addressing information is not engaged
properly in the fault out flow.
Posted by "Diluka Moratuwage (JIRA)" <ji...@apache.org>.
[ https://issues.apache.org/jira/browse/AXIS2C-681?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Diluka Moratuwage updated AXIS2C-681:
-------------------------------------
Summary: Addressing information is not engaged properly in the fault out flow. (was: Addressing information is not engaged properly)
> Addressing information is not engaged properly in the fault out flow.
> ---------------------------------------------------------------------
>
> Key: AXIS2C-681
> URL: https://issues.apache.org/jira/browse/AXIS2C-681
> Project: Axis2-C
> Issue Type: Bug
> Reporter: Diluka Moratuwage
>
> In the out fault flow, addressing information can not be included. When the following change is done into the engine.c, addressing information can be sent back in the out fault flow. But its not the exact fault flow information, its only the addressing information.
> AXIS2_EXTERN axis2_status_t AXIS2_CALL
> axis2_engine_send_fault(
> axis2_engine_t *engine,
> const axutil_env_t *env,
> axis2_msg_ctx_t *msg_ctx)
> {
> axis2_op_ctx_t *op_ctx = NULL;
> axutil_array_list_t *phases = NULL;
> AXIS2_ENV_CHECK(env, AXIS2_FAILURE);
> AXIS2_PARAM_CHECK(env->error, msg_ctx, AXIS2_FAILURE);
> op_ctx = axis2_msg_ctx_get_op_ctx(msg_ctx, env);
> if (op_ctx)
> {
> axis2_op_t *op = axis2_op_ctx_get_op(op_ctx, env);
> if (op)
> {
> phases = axis2_op_get_fault_out_flow(op, env);
> }
> }
> if (!( axis2_msg_ctx_is_paused(msg_ctx, env)))
> {
> /* send the SOAP Fault*/
> axis2_conf_ctx_t *conf_ctx = NULL;
> axis2_transport_sender_t *transport_sender = NULL;
> axis2_transport_out_desc_t *transport_out = NULL;
> conf_ctx = axis2_msg_ctx_get_conf_ctx(msg_ctx, env);
> if (conf_ctx)
> {
> /*axis2_conf_t *conf = axis2_conf_ctx_get_conf(conf_ctx, env);
> if (conf)
> {
> axutil_array_list_t *phases =
> axis2_conf_get_out_fault_flow(conf, env); */
> if (phases)
> {
> axis2_engine_invoke_phases(engine, env, phases, msg_ctx);
> }
> /* }*/
> }
--
This message is automatically generated by JIRA.
-
You can reply to this email to add a comment to the issue online.
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-dev-help@ws.apache.org
[jira] Resolved: (AXIS2C-681) Addressing information is not engaged
properly in the fault out flow.
Posted by "Samisa Abeysinghe (JIRA)" <ji...@apache.org>.
[ https://issues.apache.org/jira/browse/AXIS2C-681?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Samisa Abeysinghe resolved AXIS2C-681.
--------------------------------------
Resolution: Fixed
Fix Version/s: 1.1.0
Assignee: Samisa Abeysinghe
Fixed engine_send_fault method to solve the problem
> Addressing information is not engaged properly in the fault out flow.
> ---------------------------------------------------------------------
>
> Key: AXIS2C-681
> URL: https://issues.apache.org/jira/browse/AXIS2C-681
> Project: Axis2-C
> Issue Type: Bug
> Reporter: Diluka Moratuwage
> Assignee: Samisa Abeysinghe
> Fix For: 1.1.0
>
>
> In the out fault flow, addressing information can not be included. When the following change is done into the engine.c, addressing information can be sent back in the out fault flow. But its not the exact fault flow information, its only the addressing information.
> AXIS2_EXTERN axis2_status_t AXIS2_CALL
> axis2_engine_send_fault(
> axis2_engine_t *engine,
> const axutil_env_t *env,
> axis2_msg_ctx_t *msg_ctx)
> {
> axis2_op_ctx_t *op_ctx = NULL;
> axutil_array_list_t *phases = NULL;
> AXIS2_ENV_CHECK(env, AXIS2_FAILURE);
> AXIS2_PARAM_CHECK(env->error, msg_ctx, AXIS2_FAILURE);
> op_ctx = axis2_msg_ctx_get_op_ctx(msg_ctx, env);
> if (op_ctx)
> {
> axis2_op_t *op = axis2_op_ctx_get_op(op_ctx, env);
> if (op)
> {
> phases = axis2_op_get_fault_out_flow(op, env);
> }
> }
> if (!( axis2_msg_ctx_is_paused(msg_ctx, env)))
> {
> /* send the SOAP Fault*/
> axis2_conf_ctx_t *conf_ctx = NULL;
> axis2_transport_sender_t *transport_sender = NULL;
> axis2_transport_out_desc_t *transport_out = NULL;
> conf_ctx = axis2_msg_ctx_get_conf_ctx(msg_ctx, env);
> if (conf_ctx)
> {
> /*axis2_conf_t *conf = axis2_conf_ctx_get_conf(conf_ctx, env);
> if (conf)
> {
> axutil_array_list_t *phases =
> axis2_conf_get_out_fault_flow(conf, env); */
> if (phases)
> {
> axis2_engine_invoke_phases(engine, env, phases, msg_ctx);
> }
> /* }*/
> }
--
This message is automatically generated by JIRA.
-
You can reply to this email to add a comment to the issue online.
---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-dev-help@ws.apache.org