You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@syncope.apache.org by PSYND <te...@psynd.net> on 2016/12/07 11:56:09 UTC
Deploying Syncope Mvn/Wildfly
Hello,
we are trying to deploy the following stack using the MVN procedure:
- JDK-8.111
- MVN-3.10
- MariaDB
- Wildfly10 / Tomcat8
- Syncope2.0.1
we followed the two documentations presented here:
- http://syncope.apache.org/docs/getting-started.html#maven-project
- http://syncope.apache.org/docs/reference-guide.html#mariadb
-
http://syncope.apache.org/docs/reference-guide.html#apache-tomcat-8-and-8-5
- http://syncope.apache.org/docs/reference-guide.html#wildfly-9-and-10
and we tried to configure two different archetypes, one for Tomcat and
the other for Wildfly.
Using Wildfly we deploy the JDBC driver of MariaDB, we test the
connectivity and it's working.
We deploy the syncope.war but it fails.
We deploy syncope-console.war and syncope-enduser.war and they can be
deployed.
We deploy one more time the syncope.war and we get this error again:
Cannot upload deployment: {"WFLYCTL0080: Failed services" =>
{"jboss.deployment.unit.\"syncope.war\".WeldStartService" =>
"org.jboss.msc.service.StartException in service
jboss.deployment.unit.\"syncope.war\".WeldStartService: Failed to start
service Caused by: org.jboss.weld.exceptions.DeploymentException:
WELD-001409: Ambiguous dependencies for type Validator with qualifiers
@Default at injection point [UnbackedAnnotatedField] @Inject private
org.apache.bval.cdi.BValInterceptor.validator at
org.apache.bval.cdi.BValInterceptor.validator(BValInterceptor.java:0)
Possible dependencies: - ValidatorBean
[id=org.hibernate.validator.internal.cdi.ValidatorBean_default], -
org.apache.bval.cdi.ValidatorBean@10e0f68c "},"WFLYCTL0412: Required
services that are not installed:" =>
["jboss.deployment.unit.\"syncope.war\".WeldStartService"],"WFLYCTL0180:
Services with missing/unavailable dependencies" => undefined}
Is there any step missing?
Thanks
Re: Deploying Syncope Mvn/Wildfly
Posted by Raj Kumar <ra...@gmail.com>.
Thanks for the reply, but I am getting session error when I try to hit
console through jar or standalone app. I need to check/ change any
configuration?
Thanks,
Raj
On Dec 7, 2016 6:37 PM, "Francesco Chicchiriccò" <il...@apache.org>
wrote:
> On 07/12/2016 14:05, Raj Kumar wrote:
>
> This link will apply for 2.0.0 also?
>
>
> Yes, it does.
> Naturally, you should take care that any reference to SNAPSHOT versions
> inside the text should be replaced to your actual version (e.g. 2.0.0 /
> 2.0.1).
>
> Regards.
>
> On Dec 7, 2016 5:33 PM, "Francesco Chicchiriccò" <il...@apache.org>
> wrote:
>
>> On 07/12/2016 12:56, PSYND wrote:
>>
>>> Hello,
>>>
>>> we are trying to deploy the following stack using the MVN procedure:
>>> - JDK-8.111
>>> - MVN-3.10
>>> - MariaDB
>>> - Wildfly10 / Tomcat8
>>> - Syncope2.0.1
>>>
>>> we followed the two documentations presented here:
>>> - http://syncope.apache.org/docs/getting-started.html#maven-project
>>> - http://syncope.apache.org/docs/reference-guide.html#mariadb
>>> - http://syncope.apache.org/docs/reference-guide.html#apache-t
>>> omcat-8-and-8-5
>>> - http://syncope.apache.org/docs/reference-guide.html#wildfly-9-and-10
>>>
>>> and we tried to configure two different archetypes, one for Tomcat and
>>> the other for Wildfly.
>>>
>>> Using Wildfly we deploy the JDBC driver of MariaDB, we test the
>>> connectivity and it's working.
>>>
>>> We deploy the syncope.war but it fails.
>>> We deploy syncope-console.war and syncope-enduser.war and they can be
>>> deployed.
>>> We deploy one more time the syncope.war and we get this error again:
>>>
>>> Cannot upload deployment: {"WFLYCTL0080: Failed services" =>
>>> {"jboss.deployment.unit.\"syncope.war\".WeldStartService" =>
>>> "org.jboss.msc.service.StartException in service
>>> jboss.deployment.unit.\"syncope.war\".WeldStartService: Failed to start
>>> service Caused by: org.jboss.weld.exceptions.DeploymentException:
>>> WELD-001409: Ambiguous dependencies for type Validator with qualifiers
>>> @Default at injection point [UnbackedAnnotatedField] @Inject private
>>> org.apache.bval.cdi.BValInterceptor.validator at
>>> org.apache.bval.cdi.BValInterceptor.validator(BValInterceptor.java:0)
>>> Possible dependencies: - ValidatorBean [id=org.hibernate.validator.in
>>> ternal.cdi.ValidatorBean_default], - org.apache.bval.cdi.ValidatorB
>>> ean@10e0f68c "},"WFLYCTL0412: Required services that are not
>>> installed:" => ["jboss.deployment.unit.\"sync
>>> ope.war\".WeldStartService"],"WFLYCTL0180: Services with
>>> missing/unavailable dependencies" => undefined}
>>>
>>> Is there any step missing?
>>>
>>
>> Hi,
>> the documentation was updated since last release (2.0.1), specifically
>> for better handling of Maven build and Wildfly; please take a look at
>>
>> https://ci.apache.org/projects/syncope/reference-guide.html#
>> wildfly-9-and-10
>>
>> and
>>
>> https://ci.apache.org/projects/syncope/reference-guide.html#customization
>>
>> towards the end, when the detailed build procedure
>>
>> $ mvn clean verify \
>> -Dconf.directory=/opt/syncope/conf \
>> -Dbundles.directory=/opt/syncope/bundles \
>> -Dlog.directory=/opt/syncope/log
>> $ cp core/target/classes/*properties /opt/syncope/conf
>> $ cp console/target/classes/*properties /opt/syncope/conf
>> $ cp enduser/target/classes/*properties /opt/syncope/conf
>>
>> is reported.
>>
>> As you can see, the URL refers to the SNAPSHOT version of the guide,
>> which will reach the canonical URL
>>
>> http://syncope.apache.org/docs/reference-guide.html
>>
>> once next release (2.0.2) will be out.
>>
>> Sorry for the inconvenience.
>> Regards.
>>
>
> --
> Francesco Chicchiriccò
>
> Tirasa - Open Source Excellencehttp://www.tirasa.net/
>
> Member at The Apache Software Foundation
> Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMailhttp://home.apache.org/~ilgrosso/
>
>
Re: Deploying Syncope Mvn/Wildfly
Posted by Francesco Chicchiriccò <il...@apache.org>.
On 07/12/2016 14:05, Raj Kumar wrote:
>
> This link will apply for 2.0.0 also?
>
Yes, it does.
Naturally, you should take care that any reference to SNAPSHOT versions
inside the text should be replaced to your actual version (e.g. 2.0.0 /
2.0.1).
Regards.
> On Dec 7, 2016 5:33 PM, "Francesco Chicchiricc�" <ilgrosso@apache.org
> <ma...@apache.org>> wrote:
>
> On 07/12/2016 12:56, PSYND wrote:
>
> Hello,
>
> we are trying to deploy the following stack using the MVN
> procedure:
> - JDK-8.111
> - MVN-3.10
> - MariaDB
> - Wildfly10 / Tomcat8
> - Syncope2.0.1
>
> we followed the two documentations presented here:
> -
> http://syncope.apache.org/docs/getting-started.html#maven-project
> <http://syncope.apache.org/docs/getting-started.html#maven-project>
> - http://syncope.apache.org/docs/reference-guide.html#mariadb
> <http://syncope.apache.org/docs/reference-guide.html#mariadb>
> -
> http://syncope.apache.org/docs/reference-guide.html#apache-tomcat-8-and-8-5
> <http://syncope.apache.org/docs/reference-guide.html#apache-tomcat-8-and-8-5>
> -
> http://syncope.apache.org/docs/reference-guide.html#wildfly-9-and-10
> <http://syncope.apache.org/docs/reference-guide.html#wildfly-9-and-10>
>
> and we tried to configure two different archetypes, one for
> Tomcat and the other for Wildfly.
>
> Using Wildfly we deploy the JDBC driver of MariaDB, we test
> the connectivity and it's working.
>
> We deploy the syncope.war but it fails.
> We deploy syncope-console.war and syncope-enduser.war and they
> can be deployed.
> We deploy one more time the syncope.war and we get this error
> again:
>
> Cannot upload deployment: {"WFLYCTL0080: Failed services" =>
> {"jboss.deployment.unit.\"syncope.war\".WeldStartService" =>
> "org.jboss.msc.service.StartException in service
> jboss.deployment.unit.\"syncope.war\".WeldStartService: Failed
> to start service Caused by:
> org.jboss.weld.exceptions.DeploymentException: WELD-001409:
> Ambiguous dependencies for type Validator with qualifiers
> @Default at injection point [UnbackedAnnotatedField] @Inject
> private org.apache.bval.cdi.BValInterceptor.validator at
> org.apache.bval.cdi.BValInterceptor.validator(BValInterceptor.java:0)
> Possible dependencies: - ValidatorBean
> [id=org.hibernate.validator.in
> <http://org.hibernate.validator.in>ternal.cdi.ValidatorBean_default],
> - org.apache.bval.cdi.ValidatorBean@10e0f68c "},"WFLYCTL0412:
> Required services that are not installed:" =>
> ["jboss.deployment.unit.\"syncope.war\".WeldStartService"],"WFLYCTL0180:
> Services with missing/unavailable dependencies" => undefined}
>
> Is there any step missing?
>
>
> Hi,
> the documentation was updated since last release (2.0.1),
> specifically for better handling of Maven build and Wildfly;
> please take a look at
>
> https://ci.apache.org/projects/syncope/reference-guide.html#wildfly-9-and-10
> <https://ci.apache.org/projects/syncope/reference-guide.html#wildfly-9-and-10>
>
> and
>
> https://ci.apache.org/projects/syncope/reference-guide.html#customization
> <https://ci.apache.org/projects/syncope/reference-guide.html#customization>
>
> towards the end, when the detailed build procedure
>
> $ mvn clean verify \
> -Dconf.directory=/opt/syncope/conf \
> -Dbundles.directory=/opt/syncope/bundles \
> -Dlog.directory=/opt/syncope/log
> $ cp core/target/classes/*properties /opt/syncope/conf
> $ cp console/target/classes/*properties /opt/syncope/conf
> $ cp enduser/target/classes/*properties /opt/syncope/conf
>
> is reported.
>
> As you can see, the URL refers to the SNAPSHOT version of the
> guide, which will reach the canonical URL
>
> http://syncope.apache.org/docs/reference-guide.html
> <http://syncope.apache.org/docs/reference-guide.html>
>
> once next release (2.0.2) will be out.
>
> Sorry for the inconvenience.
> Regards.
>
--
Francesco Chicchiricc�
Tirasa - Open Source Excellence
http://www.tirasa.net/
Member at The Apache Software Foundation
Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMail
http://home.apache.org/~ilgrosso/
Re: Deploying Syncope Mvn/Wildfly
Posted by Raj Kumar <ra...@gmail.com>.
This link will apply for 2.0.0 also?
Thanks,
Raj
On Dec 7, 2016 5:33 PM, "Francesco Chicchiriccò" <il...@apache.org>
wrote:
> On 07/12/2016 12:56, PSYND wrote:
>
>> Hello,
>>
>> we are trying to deploy the following stack using the MVN procedure:
>> - JDK-8.111
>> - MVN-3.10
>> - MariaDB
>> - Wildfly10 / Tomcat8
>> - Syncope2.0.1
>>
>> we followed the two documentations presented here:
>> - http://syncope.apache.org/docs/getting-started.html#maven-project
>> - http://syncope.apache.org/docs/reference-guide.html#mariadb
>> - http://syncope.apache.org/docs/reference-guide.html#apache-
>> tomcat-8-and-8-5
>> - http://syncope.apache.org/docs/reference-guide.html#wildfly-9-and-10
>>
>> and we tried to configure two different archetypes, one for Tomcat and
>> the other for Wildfly.
>>
>> Using Wildfly we deploy the JDBC driver of MariaDB, we test the
>> connectivity and it's working.
>>
>> We deploy the syncope.war but it fails.
>> We deploy syncope-console.war and syncope-enduser.war and they can be
>> deployed.
>> We deploy one more time the syncope.war and we get this error again:
>>
>> Cannot upload deployment: {"WFLYCTL0080: Failed services" =>
>> {"jboss.deployment.unit.\"syncope.war\".WeldStartService" =>
>> "org.jboss.msc.service.StartException in service
>> jboss.deployment.unit.\"syncope.war\".WeldStartService: Failed to start
>> service Caused by: org.jboss.weld.exceptions.DeploymentException:
>> WELD-001409: Ambiguous dependencies for type Validator with qualifiers
>> @Default at injection point [UnbackedAnnotatedField] @Inject private
>> org.apache.bval.cdi.BValInterceptor.validator at
>> org.apache.bval.cdi.BValInterceptor.validator(BValInterceptor.java:0)
>> Possible dependencies: - ValidatorBean [id=org.hibernate.validator.in
>> ternal.cdi.ValidatorBean_default], - org.apache.bval.cdi.ValidatorB
>> ean@10e0f68c "},"WFLYCTL0412: Required services that are not installed:"
>> => ["jboss.deployment.unit.\"syncope.war\".WeldStartService"],"WFLYCTL0180:
>> Services with missing/unavailable dependencies" => undefined}
>>
>> Is there any step missing?
>>
>
> Hi,
> the documentation was updated since last release (2.0.1), specifically for
> better handling of Maven build and Wildfly; please take a look at
>
> https://ci.apache.org/projects/syncope/reference-guide.html#
> wildfly-9-and-10
>
> and
>
> https://ci.apache.org/projects/syncope/reference-guide.html#customization
>
> towards the end, when the detailed build procedure
>
> $ mvn clean verify \
> -Dconf.directory=/opt/syncope/conf \
> -Dbundles.directory=/opt/syncope/bundles \
> -Dlog.directory=/opt/syncope/log
> $ cp core/target/classes/*properties /opt/syncope/conf
> $ cp console/target/classes/*properties /opt/syncope/conf
> $ cp enduser/target/classes/*properties /opt/syncope/conf
>
> is reported.
>
> As you can see, the URL refers to the SNAPSHOT version of the guide, which
> will reach the canonical URL
>
> http://syncope.apache.org/docs/reference-guide.html
>
> once next release (2.0.2) will be out.
>
> Sorry for the inconvenience.
> Regards.
>
> --
> Francesco Chicchiriccò
>
> Tirasa - Open Source Excellence
> http://www.tirasa.net/
>
> Member at The Apache Software Foundation
> Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMail
> http://home.apache.org/~ilgrosso/
>
>
Re: Deploying Syncope Mvn/Wildfly
Posted by Francesco Chicchiriccò <il...@apache.org>.
Hi,
it seems it took longer than expected - but for a good reason: I have
found a bug in OpenJPA and also provided a quick fix for it.
Anyway, the reference repo was updated again with a new branch for
MariaDB and container-managed DataSource:
https://github.com/Tirasa/syncopeOnJBoss/tree/MariaDB_ContainerDataSource
Again, in the README.md there are instructions about how to configure
MariaDB and Wildfly, and to test.
I have been able to run it successfully, I wouldn't expect troubles on
your side.
Finally, WRT the e-mail below, please note that I have also renamed
https://github.com/Tirasa/syncopeOnJBoss/tree/MariaDB_NoContainerDataSource
to
https://github.com/Tirasa/syncopeOnJBoss/tree/MariaDB_ApplicationDataSource
HTH
Regards.
On 14/12/2016 09:43, Francesco Chicchiriccò wrote:
> Hi,
> I have updated the reference repo for JBoss / Wildfly with a branch
> dedicated to MariaDB:
>
> https://github.com/Tirasa/syncopeOnJBoss/tree/MariaDB_NoContainerDataSource
>
>
> In the README.md there are instructions about how to configure MariaDB
> and to test.
> I have been able to run it successfully, I wouldn't expect troubles on
> your side.
>
> Please note that you will need to remove any DataSource definition
> from Wildfly: such new branch is using application-managed DataSource
> instead.
> I will update here shortly with another branch working with
> container-managed DataSource.
>
> HTH
> Regards.
>
> On 08/12/2016 08:02, ilgrosso wrote:
>> Hi,
>> the steps reported look generally good, at a glance.
>>
>> It seems that your problem is the unavailability of the MariaDB JDBC
>> Driver
>> at some point.
>>
>> I haven't the chance to give it a try before tomorrow, but you could
>> attempt, in the meantime, to:
>>
>> 1. check if the DataSource was correctly defined for MariaDB in
>> Wildfly 10;
>> see http://stackoverflow.com/a/39868576
>>
>> 2. if this still does not work, remove any Datasource definition from
>> Wildfly and add instead the following Maven depedency:
>>
>> <dependency>
>> <groupId>org.mariadb.jdbc</groupId>
>> <artifactId>mariadb-java-client</artifactId>
>> <version>1.5.5</version>
>> </dependency
>>
>> to core/pom.xml
>>
>> HTH
>> Regards.
--
Francesco Chicchiriccò
Tirasa - Open Source Excellence
http://www.tirasa.net/
Member at The Apache Software Foundation
Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMail
http://home.apache.org/~ilgrosso/
Re: Deploying Syncope Mvn/Wildfly
Posted by PSYND <te...@psynd.net>.
Dear Francesco,
everything works correctly.
Thanks for your support
On 2016-12-14 09:43, Francesco Chicchiricc� wrote:
> Hi,
> I have updated the reference repo for JBoss / Wildfly with a branch
> dedicated to MariaDB:
>
> https://github.com/Tirasa/syncopeOnJBoss/tree/MariaDB_NoContainerDataSource
>
> In the README.md there are instructions about how to configure MariaDB
> and to test.
> I have been able to run it successfully, I wouldn't expect troubles on
> your side.
>
> Please note that you will need to remove any DataSource definition
> from Wildfly: such new branch is using application-managed DataSource
> instead.
> I will update here shortly with another branch working with
> container-managed DataSource.
>
> HTH
> Regards.
>
> On 08/12/2016 08:02, ilgrosso wrote:
>> Hi,
>> the steps reported look generally good, at a glance.
>>
>> It seems that your problem is the unavailability of the MariaDB JDBC
>> Driver
>> at some point.
>>
>> I haven't the chance to give it a try before tomorrow, but you could
>> attempt, in the meantime, to:
>>
>> 1. check if the DataSource was correctly defined for MariaDB in
>> Wildfly 10;
>> see http://stackoverflow.com/a/39868576
>>
>> 2. if this still does not work, remove any Datasource definition from
>> Wildfly and add instead the following Maven depedency:
>>
>> <dependency>
>> <groupId>org.mariadb.jdbc</groupId>
>> <artifactId>mariadb-java-client</artifactId>
>> <version>1.5.5</version>
>> </dependency
>>
>> to core/pom.xml
>>
>> HTH
>> Regards.
Re: Deploying Syncope Mvn/Wildfly
Posted by Francesco Chicchiriccò <il...@apache.org>.
Hi,
I have updated the reference repo for JBoss / Wildfly with a branch
dedicated to MariaDB:
https://github.com/Tirasa/syncopeOnJBoss/tree/MariaDB_NoContainerDataSource
In the README.md there are instructions about how to configure MariaDB
and to test.
I have been able to run it successfully, I wouldn't expect troubles on
your side.
Please note that you will need to remove any DataSource definition from
Wildfly: such new branch is using application-managed DataSource instead.
I will update here shortly with another branch working with
container-managed DataSource.
HTH
Regards.
On 08/12/2016 08:02, ilgrosso wrote:
> Hi,
> the steps reported look generally good, at a glance.
>
> It seems that your problem is the unavailability of the MariaDB JDBC Driver
> at some point.
>
> I haven't the chance to give it a try before tomorrow, but you could
> attempt, in the meantime, to:
>
> 1. check if the DataSource was correctly defined for MariaDB in Wildfly 10;
> see http://stackoverflow.com/a/39868576
>
> 2. if this still does not work, remove any Datasource definition from
> Wildfly and add instead the following Maven depedency:
>
> <dependency>
> <groupId>org.mariadb.jdbc</groupId>
> <artifactId>mariadb-java-client</artifactId>
> <version>1.5.5</version>
> </dependency
>
> to core/pom.xml
>
> HTH
> Regards.
--
Francesco Chicchiricc�
Tirasa - Open Source Excellence
http://www.tirasa.net/
Member at The Apache Software Foundation
Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMail
http://home.apache.org/~ilgrosso/
Re: Deploying Syncope Mvn/Wildfly
Posted by ilgrosso <il...@apache.org>.
Hi,
the steps reported look generally good, at a glance.
It seems that your problem is the unavailability of the MariaDB JDBC Driver
at some point.
I haven't the chance to give it a try before tomorrow, but you could
attempt, in the meantime, to:
1. check if the DataSource was correctly defined for MariaDB in Wildfly 10;
see http://stackoverflow.com/a/39868576
2. if this still does not work, remove any Datasource definition from
Wildfly and add instead the following Maven depedency:
<dependency>
<groupId>org.mariadb.jdbc</groupId>
<artifactId>mariadb-java-client</artifactId>
<version>1.5.5</version>
</dependency
to core/pom.xml
HTH
Regards.
--
View this message in context: http://syncope-user.1051894.n5.nabble.com/Deploying-Syncope-Mvn-Wildfly-tp5708844p5708851.html
Sent from the syncope-user mailing list archive at Nabble.com.
Re: Deploying Syncope Mvn/Wildfly
Posted by PSYND <te...@psynd.net>.
Main steps performed:
1) create mariadb database called syncope autentified by syncope/syncope
2) git clone syncopeJboss
From: http://syncope.apache.org/docs/reference-guide.html#mariadb
3) edit core/src/main/resources/provisioning.properties
quartz.jobstore=org.quartz.impl.jdbcjobstore.StdJDBCDelegate
quartz.sql=tables_mariadb.sql
4) edit core/src/main/resources/domains/Master.properties
Master.driverClassName=org.mariadb.jdbc.Driver
Master.url=jdbc:mariadb://localhost:3306/syncope?characterEncoding=UTF-8
Master.schema=
Master.username=syncope
Master.password=syncope
Master.databasePlatform=org.apache.openjpa.jdbc.sql.MariaDBDictionary
Master.orm=META-INF/spring-orm.xml
5)
mkdir -p /opt/syncope/bundles
mkdir -p /opt/syncope/log
mkdir -p /opt/syncope/conf
6) mvn -Dconf.directory=/opt/syncope/conf
-Dbundles.directory=/opt/syncope/bundles
7)
cp core/target/classes/*properties /opt/syncope/conf/
cp console/target/classes/*properties /opt/syncope/conf/
cp enduser/target/classes/*properties /opt/syncope/conf/
8) copy maria into wildfly/lib or deploy using the interface will give
the same result here
mariadb-java-client-1.6.0-SNAPSHOT.jar
9) Check connection creating datasource and test connection (with
success) using:
jdbc:mariadb://localhost:3306/syncope?characterEncoding=UTF-8
syncope/syncope
10) upload from wildfly interface syncope.war:
07:30:57,325 ERROR [org.springframework.web.context.ContextLoader]
(ServerService Thread Pool -- 157) Context initialization failed:
org.springframework.beans.factory.UnsatisfiedDependencyException: Error
creating bean with name 'reportServiceImpl': Unsatisfied dependency
expressed through field 'logic'; nested exception is
org.springframework.beans.factory.UnsatisfiedDependencyException: Error
creating bean with name 'reportLogic': Unsatisfied dependency expressed
through field 'jobManager'; nested exception is
org.springframework.beans.factory.UnsatisfiedDependencyException: Error
creating bean with name 'jobManagerImpl': Unsatisfied dependency
expressed through field 'scheduler'; nested exception is
org.springframework.beans.factory.BeanCreationException: Error creating
bean with name 'quartzDataSourceInit' defined in VFS resource
["/content/syncope.war/WEB-INF/lib/syncope-core-provisioning-java-2.0.1.jar/provisioningContext.xml"]:
Invocation of init method failed; nested exception is
org.springframework.jdbc.datasource.init.UncategorizedScriptException:
Failed to execute database script; nested exception is
org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get
JDBC Connection; nested exception is java.sql.SQLException: Cannot load
JDBC driver class 'org.mariadb.jdbc.Driver'
at
org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor$AutowiredFieldElement.inject(AutowiredAnnotationBeanPostProcessor.java:569)
at
org.springframework.beans.factory.annotation.InjectionMetadata.inject(InjectionMetadata.java:88)
at
org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.postProcessPropertyValues(AutowiredAnnotationBeanPostProcessor.java:349)
at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1219)
at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:543)
at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:482)
at
org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:306)
at
org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:230)
at
org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:302)
at
org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:197)
at
org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:751)
at
org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:861)
at
org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:541)
at
org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:444)
at
org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:326)
at
org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:107)
at
io.undertow.servlet.core.ApplicationListeners.contextInitialized(ApplicationListeners.java:187)
at
io.undertow.servlet.core.DeploymentManagerImpl$1.call(DeploymentManagerImpl.java:200)
at
io.undertow.servlet.core.DeploymentManagerImpl$1.call(DeploymentManagerImpl.java:171)
at
io.undertow.servlet.core.ServletRequestContextThreadSetupAction$1.call(ServletRequestContextThreadSetupAction.java:42)
at
io.undertow.servlet.core.ContextClassLoaderSetupAction$1.call(ContextClassLoaderSetupAction.java:43)
at
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThreadSetupActionWrapper.java:44)
at
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThreadSetupActionWrapper.java:44)
at
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThreadSetupActionWrapper.java:44)
at
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThreadSetupActionWrapper.java:44)
at
io.undertow.servlet.api.LegacyThreadSetupActionWrapper$1.call(LegacyThreadSetupActionWrapper.java:44)
at
io.undertow.servlet.core.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:234)
On 2016-12-07 13:06, Francesco Chicchiricc� wrote:
> On 07/12/2016 13:02, Francesco Chicchiricc� wrote:
>> On 07/12/2016 12:56, PSYND wrote:
>>> Hello,
>>>
>>> we are trying to deploy the following stack using the MVN procedure:
>>> - JDK-8.111
>>> - MVN-3.10
>>> - MariaDB
>>> - Wildfly10 / Tomcat8
>>> - Syncope2.0.1
>>>
>>> we followed the two documentations presented here:
>>> - http://syncope.apache.org/docs/getting-started.html#maven-project
>>> - http://syncope.apache.org/docs/reference-guide.html#mariadb
>>> -
>>> http://syncope.apache.org/docs/reference-guide.html#apache-tomcat-8-and-8-5
>>> -
>>> http://syncope.apache.org/docs/reference-guide.html#wildfly-9-and-10
>>>
>>> and we tried to configure two different archetypes, one for Tomcat
>>> and the other for Wildfly.
>>>
>>> Using Wildfly we deploy the JDBC driver of MariaDB, we test the
>>> connectivity and it's working.
>>>
>>> We deploy the syncope.war but it fails.
>>> We deploy syncope-console.war and syncope-enduser.war and they can be
>>> deployed.
>>> We deploy one more time the syncope.war and we get this error again:
>>>
>>> Cannot upload deployment: {"WFLYCTL0080: Failed services" =>
>>> {"jboss.deployment.unit.\"syncope.war\".WeldStartService" =>
>>> "org.jboss.msc.service.StartException in service
>>> jboss.deployment.unit.\"syncope.war\".WeldStartService: Failed to
>>> start service Caused by:
>>> org.jboss.weld.exceptions.DeploymentException: WELD-001409: Ambiguous
>>> dependencies for type Validator with qualifiers @Default at injection
>>> point [UnbackedAnnotatedField] @Inject private
>>> org.apache.bval.cdi.BValInterceptor.validator at
>>> org.apache.bval.cdi.BValInterceptor.validator(BValInterceptor.java:0)
>>> Possible dependencies: - ValidatorBean
>>> [id=org.hibernate.validator.internal.cdi.ValidatorBean_default], -
>>> org.apache.bval.cdi.ValidatorBean@10e0f68c "},"WFLYCTL0412: Required
>>> services that are not installed:" =>
>>> ["jboss.deployment.unit.\"syncope.war\".WeldStartService"],"WFLYCTL0180:
>>> Services with missing/unavailable dependencies" => undefined}
>>>
>>> Is there any step missing?
>>
>> Hi,
>> the documentation was updated since last release (2.0.1), specifically
>> for better handling of Maven build and Wildfly; please take a look at
>>
>> https://ci.apache.org/projects/syncope/reference-guide.html#wildfly-9-and-10
>> and
>>
>> https://ci.apache.org/projects/syncope/reference-guide.html#customization
>>
>> towards the end, when the detailed build procedure
>>
>> $ mvn clean verify \
>> -Dconf.directory=/opt/syncope/conf \
>> -Dbundles.directory=/opt/syncope/bundles \
>> -Dlog.directory=/opt/syncope/log
>> $ cp core/target/classes/*properties /opt/syncope/conf
>> $ cp console/target/classes/*properties /opt/syncope/conf
>> $ cp enduser/target/classes/*properties /opt/syncope/conf
>>
>> is reported.
>>
>> As you can see, the URL refers to the SNAPSHOT version of the guide,
>> which will reach the canonical URL
>>
>> http://syncope.apache.org/docs/reference-guide.html
>>
>> once next release (2.0.2) will be out.
>>
>> Sorry for the inconvenience.
>
> Forgot to mention: the sample project at
>
> https://github.com/Tirasa/syncopeOnJBoss
>
> is already built by following the indications from
>
> https://ci.apache.org/projects/syncope/reference-guide.html#wildfly-9-and-10
>
>
> Regards.
Re: Deploying Syncope Mvn/Wildfly
Posted by Francesco Chicchiriccò <il...@apache.org>.
On 07/12/2016 13:02, Francesco Chicchiricc� wrote:
> On 07/12/2016 12:56, PSYND wrote:
>> Hello,
>>
>> we are trying to deploy the following stack using the MVN procedure:
>> - JDK-8.111
>> - MVN-3.10
>> - MariaDB
>> - Wildfly10 / Tomcat8
>> - Syncope2.0.1
>>
>> we followed the two documentations presented here:
>> - http://syncope.apache.org/docs/getting-started.html#maven-project
>> - http://syncope.apache.org/docs/reference-guide.html#mariadb
>> -
>> http://syncope.apache.org/docs/reference-guide.html#apache-tomcat-8-and-8-5
>> - http://syncope.apache.org/docs/reference-guide.html#wildfly-9-and-10
>>
>> and we tried to configure two different archetypes, one for Tomcat
>> and the other for Wildfly.
>>
>> Using Wildfly we deploy the JDBC driver of MariaDB, we test the
>> connectivity and it's working.
>>
>> We deploy the syncope.war but it fails.
>> We deploy syncope-console.war and syncope-enduser.war and they can be
>> deployed.
>> We deploy one more time the syncope.war and we get this error again:
>>
>> Cannot upload deployment: {"WFLYCTL0080: Failed services" =>
>> {"jboss.deployment.unit.\"syncope.war\".WeldStartService" =>
>> "org.jboss.msc.service.StartException in service
>> jboss.deployment.unit.\"syncope.war\".WeldStartService: Failed to
>> start service Caused by:
>> org.jboss.weld.exceptions.DeploymentException: WELD-001409: Ambiguous
>> dependencies for type Validator with qualifiers @Default at injection
>> point [UnbackedAnnotatedField] @Inject private
>> org.apache.bval.cdi.BValInterceptor.validator at
>> org.apache.bval.cdi.BValInterceptor.validator(BValInterceptor.java:0)
>> Possible dependencies: - ValidatorBean
>> [id=org.hibernate.validator.internal.cdi.ValidatorBean_default], -
>> org.apache.bval.cdi.ValidatorBean@10e0f68c "},"WFLYCTL0412: Required
>> services that are not installed:" =>
>> ["jboss.deployment.unit.\"syncope.war\".WeldStartService"],"WFLYCTL0180:
>> Services with missing/unavailable dependencies" => undefined}
>>
>> Is there any step missing?
>
> Hi,
> the documentation was updated since last release (2.0.1), specifically
> for better handling of Maven build and Wildfly; please take a look at
>
> https://ci.apache.org/projects/syncope/reference-guide.html#wildfly-9-and-10
>
>
> and
>
> https://ci.apache.org/projects/syncope/reference-guide.html#customization
>
> towards the end, when the detailed build procedure
>
> $ mvn clean verify \
> -Dconf.directory=/opt/syncope/conf \
> -Dbundles.directory=/opt/syncope/bundles \
> -Dlog.directory=/opt/syncope/log
> $ cp core/target/classes/*properties /opt/syncope/conf
> $ cp console/target/classes/*properties /opt/syncope/conf
> $ cp enduser/target/classes/*properties /opt/syncope/conf
>
> is reported.
>
> As you can see, the URL refers to the SNAPSHOT version of the guide,
> which will reach the canonical URL
>
> http://syncope.apache.org/docs/reference-guide.html
>
> once next release (2.0.2) will be out.
>
> Sorry for the inconvenience.
Forgot to mention: the sample project at
https://github.com/Tirasa/syncopeOnJBoss
is already built by following the indications from
https://ci.apache.org/projects/syncope/reference-guide.html#wildfly-9-and-10
Regards.
--
Francesco Chicchiricc�
Tirasa - Open Source Excellence
http://www.tirasa.net/
Member at The Apache Software Foundation
Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMail
http://home.apache.org/~ilgrosso/
Re: Deploying Syncope Mvn/Wildfly
Posted by Francesco Chicchiriccò <il...@apache.org>.
On 07/12/2016 12:56, PSYND wrote:
> Hello,
>
> we are trying to deploy the following stack using the MVN procedure:
> - JDK-8.111
> - MVN-3.10
> - MariaDB
> - Wildfly10 / Tomcat8
> - Syncope2.0.1
>
> we followed the two documentations presented here:
> - http://syncope.apache.org/docs/getting-started.html#maven-project
> - http://syncope.apache.org/docs/reference-guide.html#mariadb
> -
> http://syncope.apache.org/docs/reference-guide.html#apache-tomcat-8-and-8-5
> - http://syncope.apache.org/docs/reference-guide.html#wildfly-9-and-10
>
> and we tried to configure two different archetypes, one for Tomcat and
> the other for Wildfly.
>
> Using Wildfly we deploy the JDBC driver of MariaDB, we test the
> connectivity and it's working.
>
> We deploy the syncope.war but it fails.
> We deploy syncope-console.war and syncope-enduser.war and they can be
> deployed.
> We deploy one more time the syncope.war and we get this error again:
>
> Cannot upload deployment: {"WFLYCTL0080: Failed services" =>
> {"jboss.deployment.unit.\"syncope.war\".WeldStartService" =>
> "org.jboss.msc.service.StartException in service
> jboss.deployment.unit.\"syncope.war\".WeldStartService: Failed to
> start service Caused by:
> org.jboss.weld.exceptions.DeploymentException: WELD-001409: Ambiguous
> dependencies for type Validator with qualifiers @Default at injection
> point [UnbackedAnnotatedField] @Inject private
> org.apache.bval.cdi.BValInterceptor.validator at
> org.apache.bval.cdi.BValInterceptor.validator(BValInterceptor.java:0)
> Possible dependencies: - ValidatorBean
> [id=org.hibernate.validator.internal.cdi.ValidatorBean_default], -
> org.apache.bval.cdi.ValidatorBean@10e0f68c "},"WFLYCTL0412: Required
> services that are not installed:" =>
> ["jboss.deployment.unit.\"syncope.war\".WeldStartService"],"WFLYCTL0180:
> Services with missing/unavailable dependencies" => undefined}
>
> Is there any step missing?
Hi,
the documentation was updated since last release (2.0.1), specifically
for better handling of Maven build and Wildfly; please take a look at
https://ci.apache.org/projects/syncope/reference-guide.html#wildfly-9-and-10
and
https://ci.apache.org/projects/syncope/reference-guide.html#customization
towards the end, when the detailed build procedure
$ mvn clean verify \
-Dconf.directory=/opt/syncope/conf \
-Dbundles.directory=/opt/syncope/bundles \
-Dlog.directory=/opt/syncope/log
$ cp core/target/classes/*properties /opt/syncope/conf
$ cp console/target/classes/*properties /opt/syncope/conf
$ cp enduser/target/classes/*properties /opt/syncope/conf
is reported.
As you can see, the URL refers to the SNAPSHOT version of the guide,
which will reach the canonical URL
http://syncope.apache.org/docs/reference-guide.html
once next release (2.0.2) will be out.
Sorry for the inconvenience.
Regards.
--
Francesco Chicchiricc�
Tirasa - Open Source Excellence
http://www.tirasa.net/
Member at The Apache Software Foundation
Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMail
http://home.apache.org/~ilgrosso/