You are viewing a plain text version of this content. The canonical link for it is here.
Posted to asp@perl.apache.org by Winanjaya <wi...@cbn.net.id> on 2003/09/10 11:17:12 UTC
Newbie question
Dear The Expert,
I have followed the quick start installation in README file .. when I open
the site it displayed as follow:
#!/usr/bin/perl /usr/bin/asp-perl
[0]%>> ([0]%>>source)
I have stuck on this for almost 1 week, could any body please help me ..
what should I do?
TIA
Winan
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org
Re: Newbie question
Posted by Josh Chamas <jo...@chamas.com>.
Winanjaya wrote:
> Hi ..
> I put global.asa to /tmp and also I changed the .htaccess file to point
> global to /tmp folder .. I also I have added configuration to httpd and
> restarted it .. the result is: I still cannot see my .asp page .. I get
> "Internal server error" .. I though I was missing something important ..
> because this is only occurs in my own .asp only .. for the .asp example are
> works fine .. .. could you or anybody please help me .. what should I do?
>
>
Check the apache error_log, what is the error message?
--Josh
________________________________________________________________
Josh Chamas, Founder phone:925-552-0128
Chamas Enterprises Inc. http://www.chamas.com
NodeWorks Link Checker http://www.nodeworks.com
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org
Re: Newbie question
Posted by Winanjaya <wi...@cbn.net.id>.
Hi ..
I put global.asa to /tmp and also I changed the .htaccess file to point
global to /tmp folder .. I also I have added configuration to httpd and
restarted it .. the result is: I still cannot see my .asp page .. I get
"Internal server error" .. I though I was missing something important ..
because this is only occurs in my own .asp only .. for the .asp example are
works fine .. .. could you or anybody please help me .. what should I do?
many thanks in advance
Regards
Winan
----- Original Message -----
From: "Josh Chamas" <jo...@chamas.com>
To: "Winanjaya" <wi...@cbn.net.id>
Cc: <as...@perl.apache.org>
Sent: Thursday, September 11, 2003 1:31 AM
Subject: Re: Newbie question
> Winanjaya wrote:
> > The sample .asp files are working . the problem is I create my own .asp
file
> > but it does not work .. do you have any suggestion?
> >
>
> You need to make sure that a config like that in the samples eg/.htaccess
file
> is active for your scripts. You will need to look at the .htaccess file
> and understand how Apache + mod_perl configuration is done as show here:
>
> http://www.apache-asp.org/config.html
>
> If you add configuration sections to your httpd.conf, then will need to
> restart your web server for them to take effect.
>
> Regards,
>
> Josh
> ________________________________________________________________
> Josh Chamas, Founder phone:925-552-0128
> Chamas Enterprises Inc. http://www.chamas.com
> NodeWorks Link Checker http://www.nodeworks.com
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
> For additional commands, e-mail: asp-help@perl.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org
Re: Newbie question
Posted by Josh Chamas <jo...@chamas.com>.
Winanjaya wrote:
> The sample .asp files are working . the problem is I create my own .asp file
> but it does not work .. do you have any suggestion?
>
You need to make sure that a config like that in the samples eg/.htaccess file
is active for your scripts. You will need to look at the .htaccess file
and understand how Apache + mod_perl configuration is done as show here:
http://www.apache-asp.org/config.html
If you add configuration sections to your httpd.conf, then will need to
restart your web server for them to take effect.
Regards,
Josh
________________________________________________________________
Josh Chamas, Founder phone:925-552-0128
Chamas Enterprises Inc. http://www.chamas.com
NodeWorks Link Checker http://www.nodeworks.com
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org
Re: Newbie question
Posted by Winanjaya <wi...@cbn.net.id>.
The sample .asp files are working . the problem is I create my own .asp file
but it does not work .. do you have any suggestion?
TIA
Winan
----- Original Message -----
From: "Josh Chamas" <jo...@chamas.com>
To: "Winanjaya" <wi...@cbn.net.id>
Cc: <as...@perl.apache.org>
Sent: Wednesday, September 10, 2003 10:20 PM
Subject: Re: Newbie question
> Winanjaya wrote:
> > Dear The Expert,
> > I have followed the quick start installation in README file .. when I
open
> > the site it displayed as follow:
> >
> > #!/usr/bin/perl /usr/bin/asp-perl
> > [0]%>> ([0]%>>source)
> >
> >
> > I have stuck on this for almost 1 week, could any body please help me ..
> > what should I do?
> >
> > TIA
> >
> > Winan
> >
>
> What is the directory, full path please, that the examples are installed
in?
>
> Is the .htaccess installed in the ./eg directory? It needs to be.
>
> What is the configuration in httpd.conf that has activated the .htaccess
files?
>
> Have you restarted the web server?
>
> --Josh
>
> ________________________________________________________________
> Josh Chamas, Founder phone:925-552-0128
> Chamas Enterprises Inc. http://www.chamas.com
> NodeWorks Link Checker http://www.nodeworks.com
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
> For additional commands, e-mail: asp-help@perl.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org
Re: Newbie question
Posted by Josh Chamas <jo...@chamas.com>.
Winanjaya wrote:
> Dear The Expert,
> I have followed the quick start installation in README file .. when I open
> the site it displayed as follow:
>
> #!/usr/bin/perl /usr/bin/asp-perl
> [0]%>> ([0]%>>source)
>
>
> I have stuck on this for almost 1 week, could any body please help me ..
> what should I do?
>
> TIA
>
> Winan
>
What is the directory, full path please, that the examples are installed in?
Is the .htaccess installed in the ./eg directory? It needs to be.
What is the configuration in httpd.conf that has activated the .htaccess files?
Have you restarted the web server?
--Josh
________________________________________________________________
Josh Chamas, Founder phone:925-552-0128
Chamas Enterprises Inc. http://www.chamas.com
NodeWorks Link Checker http://www.nodeworks.com
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org