You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@lucene.apache.org by ct...@apache.org on 2019/02/15 21:16:18 UTC
[lucene-solr] branch jira/solr-13235 updated (32443cf -> d12e5fd)
This is an automated email from the ASF dual-hosted git repository.
ctargett pushed a change to branch jira/solr-13235
in repository https://gitbox.apache.org/repos/asf/lucene-solr.git.
from 32443cf Ref Guide: fix typos & abbreviated words
add a3a4ecd LUCENE-8662: Change TermsEnum.seekExact(BytesRef) to abstract
add bf69a40 SOLR-12330: rethow NPEs and other json.facet syntax errors properly as 400
add cd4cf70 SOLR-12330: clarifying domain.(filter,query) for json.facet in the ref guide.
add 9db39ab LUCENE-8687: Optimise radix partitioning for points on heap
add 75c5325 add 7.7.0 version to rdf
add 55c0617 Allow GPG keys with no spaces
add 242ff88 SOLR-13155: Add command-line option for testing autoscaling configurations.
add 4e34a0c Add 7.7.0 back compat test indexes
add 5310152 Fix some spell check issues
add cfefdad SOLR-13171 : A true streaming parser for javabin payload/stream without creating any objects
add a084cc1 SOLR-13241: Add 'autoscaling' tool to solr.cmd
add abcda82 SOLR-13155: Minor addition to the "stats" section to make it easier to estimate the distribution of cores across nodes.
add 1654b32 fix grammar in streaming-expressions.adoc
add e63ac04 further solr-ref-guide grammar fixes (s/rather then/rather than/g)
add b4b9c39 SOLR-13252: Fix an NPE when setting a "policy" property for an existing collection.
add e195995 SOLR-12770: make docs on shards param a little more clear, fix a couple typos
add 52a9241 Ref Guide: fix "cloud mode" to "SolrCloud mode"
add 10acaf0 SOLR-13126: Correctly combine multiplicative query boosts
add 4a513fa LUCENE-8292: Make TermsEnum fully abstract (#574)
new d12e5fd SOLR-13235: split Collections API page into several & fix references throughout Guide
The 1 revisions listed above as "new" are entirely new to this
repository and will be described in separate emails. The revisions
listed as "add" were already present in the repository and have only
been added to this reference.
Summary of changes:
dev-tools/doap/lucene.rdf | 7 +
dev-tools/doap/solr.rdf | 7 +
dev-tools/scripts/buildAndPushRelease.py | 2 +-
lucene/CHANGES.txt | 7 +
lucene/MIGRATE.txt | 7 +
.../analysis/charfilter/HTMLStripCharFilter.java | 2 +-
.../miscellaneous/WordDelimiterIterator.java | 2 +-
.../analysis/pattern/PatternReplaceFilter.java | 4 +-
.../pattern/SimplePatternSplitTokenizer.java | 2 +-
.../analysis/wikipedia/WikipediaTokenizer.java | 6 +-
.../codecs/lucene70/Lucene70DocValuesProducer.java | 3 +-
.../lucene/index/TestBackwardsCompatibility.java | 4 +-
.../apache/lucene/index/unsupported.7.7.0-cfs.zip | Bin 0 -> 15541 bytes
.../lucene/index/unsupported.7.7.0-nocfs.zip | Bin 0 -> 15543 bytes
.../benchmark/byTask/tasks/NewAnalyzerTask.java | 2 +-
.../lucene/benchmark/quality/trec/TrecJudge.java | 2 +-
.../lucene/classification/BM25NBClassifier.java | 2 +-
.../SimpleNaiveBayesDocumentClassifier.java | 2 +-
.../classification/utils/NearestFuzzyQuery.java | 2 +-
.../lucene/codecs/blockterms/BlockTermsReader.java | 3 +-
.../blocktreeords/OrdsIntersectTermsEnum.java | 4 +-
.../codecs/blocktreeords/OrdsSegmentTermsEnum.java | 4 +-
.../codecs/bloom/BloomFilteringPostingsFormat.java | 3 +-
.../lucene/codecs/memory/DirectPostingsFormat.java | 6 +-
.../lucene/codecs/memory/FSTOrdTermsReader.java | 2 +-
.../lucene/codecs/memory/FSTTermsReader.java | 2 +-
.../codecs/simpletext/SimpleTextBKDWriter.java | 103 +-
.../codecs/simpletext/SimpleTextFieldsReader.java | 3 +-
.../simpletext/SimpleTextTermVectorsReader.java | 3 +-
.../lucene/codecs/PushPostingsWriterBase.java | 2 +-
.../codecs/blocktree/IntersectTermsEnum.java | 4 +-
.../lucene/codecs/blocktree/SegmentTermsEnum.java | 4 +-
.../compressing/CompressingTermVectorsReader.java | 3 +-
.../lucene/codecs/compressing/Compressor.java | 2 +-
.../codecs/lucene60/Lucene60PointsFormat.java | 2 +-
.../codecs/lucene70/Lucene70SegmentInfoFormat.java | 2 +-
.../codecs/lucene80/Lucene80DocValuesProducer.java | 3 +-
.../lucene/geo/SimpleGeoJSONPolygonParser.java | 2 +-
.../org/apache/lucene/index/BaseTermsEnum.java | 75 +
.../lucene/index/ConcurrentMergeScheduler.java | 2 +-
.../lucene/index/EmptyDocValuesProducer.java | 2 +-
.../org/apache/lucene/index/FilterLeafReader.java | 15 +
.../org/apache/lucene/index/FreqProxFields.java | 2 +-
.../org/apache/lucene/index/IndexWriterConfig.java | 2 +-
.../org/apache/lucene/index/MultiTermsEnum.java | 2 +-
.../lucene/index/SortedDocValuesTermsEnum.java | 2 +-
.../lucene/index/SortedSetDocValuesTermsEnum.java | 2 +-
.../apache/lucene/index/StoredFieldVisitor.java | 2 +-
.../java/org/apache/lucene/index/TermsEnum.java | 42 +-
.../search/ControlledRealTimeReopenThread.java | 2 +-
.../apache/lucene/search/DisjunctionMaxScorer.java | 2 +-
.../org/apache/lucene/search/FuzzyTermsEnum.java | 3 +-
.../lucene/search/SearcherLifetimeManager.java | 2 +-
.../org/apache/lucene/search/SearcherManager.java | 2 +-
.../java/org/apache/lucene/store/FSDirectory.java | 4 +-
.../java/org/apache/lucene/store/IndexInput.java | 2 +-
.../apache/lucene/store/NativeFSLockFactory.java | 2 +-
.../java/org/apache/lucene/util/ByteBlockPool.java | 2 +-
.../lucene/util/automaton/CompiledAutomaton.java | 2 +-
.../util/automaton/MinimizationOperations.java | 2 +-
.../org/apache/lucene/util/automaton/RegExp.java | 4 +-
.../apache/lucene/util/bkd/BKDRadixSelector.java | 163 +-
.../java/org/apache/lucene/util/bkd/BKDWriter.java | 109 +-
.../src/java/org/apache/lucene/util/fst/Util.java | 2 +-
.../test/org/apache/lucene/index/TestCodecs.java | 2 +-
.../test/org/apache/lucene/util/bkd/TestBKD.java | 2 +-
.../lucene/util/bkd/TestBKDRadixSelector.java | 48 +-
.../org/apache/lucene/facet/DrillDownQuery.java | 2 +-
.../apache/lucene/facet/LongValueFacetCounts.java | 2 +-
.../facet/taxonomy/writercache/LabelToOrdinal.java | 4 +-
.../taxonomy/writercache/NameHashIntCacheLRU.java | 2 +-
.../taxonomy/writercache/NameIntCacheLRU.java | 2 +-
.../apache/lucene/index/memory/MemoryIndex.java | 2 +-
.../org/apache/lucene/document/LazyDocument.java | 2 +-
.../apache/lucene/misc/SweetSpotSimilarity.java | 2 +-
.../lucene/queries/function/ValueSource.java | 5 +-
.../lucene/queryparser/classic/CharStream.java | 2 +-
.../standard/builders/SynonymQueryNodeBuilder.java | 2 +-
.../flexible/standard/nodes/PointQueryNode.java | 2 +-
.../flexible/standard/parser/CharStream.java | 2 +-
.../queryparser/surround/parser/CharStream.java | 2 +-
.../lucene/replicator/ReplicationClient.java | 2 +-
.../org/apache/lucene/replicator/Revision.java | 4 +-
.../apache/lucene/replicator/nrt/ReplicaNode.java | 4 +-
.../idversion/IDVersionSegmentTermsEnum.java | 6 +-
.../suggest/analyzing/AnalyzingInfixSuggester.java | 2 +-
.../suggest/jaspell/JaspellTernarySearchTrie.java | 6 +-
.../apache/lucene/search/suggest/Top50KWiki.utf8 | 2 +-
.../codecs/ramonly/RAMOnlyPostingsFormat.java | 5 +-
.../apache/lucene/index/RandomPostingsTester.java | 2 +-
solr/CHANGES.txt | 9 +
solr/bin/solr | 8 +-
solr/bin/solr.cmd | 10 +-
.../dataimport/TestContentStreamDataSource.java | 2 +-
.../OverseerCollectionMessageHandler.java | 2 +-
.../java/org/apache/solr/core/CoreContainer.java | 2 +-
.../solr/handler/AnalysisRequestHandlerBase.java | 4 +-
.../java/org/apache/solr/query/SolrRangeQuery.java | 3 +-
.../apache/solr/response/BinaryResponseWriter.java | 9 +
.../org/apache/solr/search/facet/FacetModule.java | 8 +-
.../apache/solr/search/facet/FacetProcessor.java | 39 +-
.../org/apache/solr/search/facet/FacetRange.java | 29 +-
.../org/apache/solr/search/facet/FacetRequest.java | 92 +-
.../org/apache/solr/uninverting/DocTermOrds.java | 3 +-
.../processor/DistributedUpdateProcessor.java | 2 +-
.../java/org/apache/solr/util/RedactionUtils.java | 29 +
.../src/java/org/apache/solr/util/SolrCLI.java | 301 +++
.../org/apache/solr/search/TestQueryTypes.java | 16 +
.../apache/solr/search/facet/TestJsonFacets.java | 115 +-
.../solr-ref-guide/src/aws-solrcloud-tutorial.adoc | 2 +-
solr/solr-ref-guide/src/blob-store-api.adoc | 2 +-
.../src/cluster-node-management.adoc | 496 +++++
solr/solr-ref-guide/src/collection-aliasing.adoc | 394 ++++
solr/solr-ref-guide/src/collection-management.adoc | 752 +++++++
solr/solr-ref-guide/src/collections-api.adoc | 2350 +-------------------
.../solr-ref-guide/src/collections-core-admin.adoc | 2 +-
.../solr-ref-guide/src/colocating-collections.adoc | 6 +-
.../solr-ref-guide/src/command-line-utilities.adoc | 2 +-
solr/solr-ref-guide/src/coreadmin-api.adoc | 2 +-
solr/solr-ref-guide/src/curve-fitting.adoc | 2 +-
solr/solr-ref-guide/src/distributed-requests.adoc | 36 +-
.../distributed-search-with-index-sharding.adoc | 5 +-
solr/solr-ref-guide/src/dsp.adoc | 6 +-
.../src/getting-started-with-solrcloud.adoc | 2 +-
solr/solr-ref-guide/src/highlighting.adoc | 2 +-
.../src/implicit-requesthandlers.adoc | 2 +-
solr/solr-ref-guide/src/installing-solr.adoc | 2 +-
.../src/json-faceting-domain-changes.adoc | 10 +-
solr/solr-ref-guide/src/machine-learning.adoc | 4 +-
.../src/making-and-restoring-backups.adoc | 4 +-
solr/solr-ref-guide/src/replica-management.adoc | 338 +++
.../src/rule-based-replica-placement.adoc | 4 +-
solr/solr-ref-guide/src/shard-management.adoc | 299 +++
.../src/shards-and-indexing-data-in-solrcloud.adoc | 4 +-
.../src/solr-control-script-reference.adoc | 4 +-
solr/solr-ref-guide/src/solr-upgrade-notes.adoc | 6 +-
solr/solr-ref-guide/src/streaming-expressions.adoc | 2 +-
solr/solr-ref-guide/src/the-terms-component.adoc | 8 +-
solr/solr-ref-guide/src/time-routed-aliases.adoc | 4 +-
solr/solr-ref-guide/src/time-series.adoc | 2 +-
.../client/solrj/FastStreamingDocsCallback.java | 66 +
.../org/apache/solr/client/solrj/SolrClient.java | 14 +-
.../solr/client/solrj/cloud/autoscaling/Row.java | 4 +
.../solr/client/solrj/impl/HttpSolrClient.java | 4 +-
.../solrj/impl/StreamingBinaryResponseParser.java | 169 +-
.../java/org/apache/solr/common/SolrDocument.java | 1 +
.../apache/solr/common/ToleratedUpdateError.java | 2 +-
.../org/apache/solr/common/util/DataEntry.java | 181 ++
.../solr/common/util/DataInputInputStream.java | 14 +
.../apache/solr/common/util/FastInputStream.java | 7 +
.../solr/common/util/FastJavaBinDecoder.java | 829 +++++++
.../org/apache/solr/common/util/JavaBinCodec.java | 94 +-
.../org/apache/solr/common/util/StringBytes.java | 78 +
.../apache/solr/common/util/Utf8CharSequence.java | 4 +-
.../java/org/apache/solr/common/util/Utils.java | 1 +
solr/solrj/src/test-files/solrj/javabin_sample.bin | Bin 0 -> 868 bytes
.../solr/common/util/TestFastJavabinDecoder.java | 302 +++
.../apache/solr/common/util/TestJavaBinCodec.java | 16 +-
.../solr/common/util/Utf8CharSequenceTest.java | 2 +-
159 files changed, 5132 insertions(+), 2882 deletions(-)
create mode 100644 lucene/backward-codecs/src/test/org/apache/lucene/index/unsupported.7.7.0-cfs.zip
create mode 100644 lucene/backward-codecs/src/test/org/apache/lucene/index/unsupported.7.7.0-nocfs.zip
create mode 100644 lucene/core/src/java/org/apache/lucene/index/BaseTermsEnum.java
create mode 100644 solr/solr-ref-guide/src/cluster-node-management.adoc
create mode 100644 solr/solr-ref-guide/src/collection-aliasing.adoc
create mode 100644 solr/solr-ref-guide/src/collection-management.adoc
create mode 100644 solr/solr-ref-guide/src/replica-management.adoc
create mode 100644 solr/solr-ref-guide/src/shard-management.adoc
create mode 100644 solr/solrj/src/java/org/apache/solr/client/solrj/FastStreamingDocsCallback.java
create mode 100644 solr/solrj/src/java/org/apache/solr/common/util/DataEntry.java
create mode 100644 solr/solrj/src/java/org/apache/solr/common/util/FastJavaBinDecoder.java
create mode 100644 solr/solrj/src/java/org/apache/solr/common/util/StringBytes.java
create mode 100644 solr/solrj/src/test-files/solrj/javabin_sample.bin
create mode 100644 solr/solrj/src/test/org/apache/solr/common/util/TestFastJavabinDecoder.java
[lucene-solr] 01/01: SOLR-13235: split Collections API page into
several & fix references throughout Guide
Posted by ct...@apache.org.
This is an automated email from the ASF dual-hosted git repository.
ctargett pushed a commit to branch jira/solr-13235
in repository https://gitbox.apache.org/repos/asf/lucene-solr.git
commit d12e5fda047dd64b690ed4fcc145a26fded1f6cc
Author: Cassandra Targett <ct...@apache.org>
AuthorDate: Fri Feb 15 15:15:53 2019 -0600
SOLR-13235: split Collections API page into several & fix references throughout Guide
---
solr/solr-ref-guide/src/blob-store-api.adoc | 2 +-
.../src/cluster-node-management.adoc | 496 +++++
solr/solr-ref-guide/src/collection-aliasing.adoc | 394 ++++
solr/solr-ref-guide/src/collection-management.adoc | 752 +++++++
solr/solr-ref-guide/src/collections-api.adoc | 2350 +-------------------
.../solr-ref-guide/src/collections-core-admin.adoc | 2 +-
.../solr-ref-guide/src/colocating-collections.adoc | 6 +-
.../solr-ref-guide/src/command-line-utilities.adoc | 2 +-
solr/solr-ref-guide/src/coreadmin-api.adoc | 2 +-
.../src/making-and-restoring-backups.adoc | 4 +-
solr/solr-ref-guide/src/replica-management.adoc | 338 +++
.../src/rule-based-replica-placement.adoc | 4 +-
solr/solr-ref-guide/src/shard-management.adoc | 299 +++
.../src/shards-and-indexing-data-in-solrcloud.adoc | 4 +-
.../src/solr-control-script-reference.adoc | 2 +-
solr/solr-ref-guide/src/solr-upgrade-notes.adoc | 6 +-
solr/solr-ref-guide/src/time-routed-aliases.adoc | 4 +-
17 files changed, 2356 insertions(+), 2311 deletions(-)
diff --git a/solr/solr-ref-guide/src/blob-store-api.adoc b/solr/solr-ref-guide/src/blob-store-api.adoc
index 941be1f..53eb266 100644
--- a/solr/solr-ref-guide/src/blob-store-api.adoc
+++ b/solr/solr-ref-guide/src/blob-store-api.adoc
@@ -37,7 +37,7 @@ The BlobHandler is automatically registered in the .system collection. The `solr
If you do not use the `-shards` or `-replicationFactor` options, then defaults of numShards=1 and replicationFactor=3 (or maximum nodes in the cluster) will be used.
-You can create the `.system` collection with the <<collections-api.adoc#create,CREATE command>> of the Collections API, as in this example:
+You can create the `.system` collection with the <<collection-management.adoc#create,CREATE command>> of the Collections API, as in this example:
[.dynamic-tabs]
--
diff --git a/solr/solr-ref-guide/src/cluster-node-management.adoc b/solr/solr-ref-guide/src/cluster-node-management.adoc
new file mode 100644
index 0000000..8dd4a26
--- /dev/null
+++ b/solr/solr-ref-guide/src/cluster-node-management.adoc
@@ -0,0 +1,496 @@
+= Cluster and Node Management Commands
+:page-tocclass: right
+:page-toclevels: 1
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements. See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership. The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License. You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied. See the License for the
+// specific language governing permissions and limitations
+// under the License.
+
+A cluster is a set of Solr nodes operating in coordination with each other.
+
+These API commands work with a SolrCloud cluster at the entire cluster level, or on individual nodes.
+
+[[clusterstatus]]
+== CLUSTERSTATUS: Cluster Status
+
+Fetch the cluster status including collections, shards, replicas, configuration name as well as collection aliases and cluster properties.
+
+`/admin/collections?action=CLUSTERSTATUS`
+
+=== CLUSTERSTATUS Parameters
+
+`collection`::
+The collection name for which information is requested. If omitted, information on all collections in the cluster will be returned.
+
+`shard`::
+The shard(s) for which information is requested. Multiple shard names can be specified as a comma-separated list.
+
+`\_route_`::
+This can be used if you need the details of the shard where a particular document belongs to and you don't know which shard it falls under.
+
+=== CLUSTERSTATUS Response
+
+The response will include the status of the request and the status of the cluster.
+
+=== Examples using CLUSTERSTATUS
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=CLUSTERSTATUS
+----
+
+*Output*
+
+[source,json]
+----
+{
+ "responseHeader":{
+ "status":0,
+ "QTime":333},
+ "cluster":{
+ "collections":{
+ "collection1":{
+ "shards":{
+ "shard1":{
+ "range":"80000000-ffffffff",
+ "state":"active",
+ "replicas":{
+ "core_node1":{
+ "state":"active",
+ "core":"collection1",
+ "node_name":"127.0.1.1:8983_solr",
+ "base_url":"http://127.0.1.1:8983/solr",
+ "leader":"true"},
+ "core_node3":{
+ "state":"active",
+ "core":"collection1",
+ "node_name":"127.0.1.1:8900_solr",
+ "base_url":"http://127.0.1.1:8900/solr"}}},
+ "shard2":{
+ "range":"0-7fffffff",
+ "state":"active",
+ "replicas":{
+ "core_node2":{
+ "state":"active",
+ "core":"collection1",
+ "node_name":"127.0.1.1:7574_solr",
+ "base_url":"http://127.0.1.1:7574/solr",
+ "leader":"true"},
+ "core_node4":{
+ "state":"active",
+ "core":"collection1",
+ "node_name":"127.0.1.1:7500_solr",
+ "base_url":"http://127.0.1.1:7500/solr"}}}},
+ "maxShardsPerNode":"1",
+ "router":{"name":"compositeId"},
+ "replicationFactor":"1",
+ "znodeVersion": 11,
+ "autoCreated":"true",
+ "configName" : "my_config",
+ "aliases":["both_collections"]
+ },
+ "collection2":{
+ "..."
+ }
+ },
+ "aliases":{ "both_collections":"collection1,collection2" },
+ "roles":{
+ "overseer":[
+ "127.0.1.1:8983_solr",
+ "127.0.1.1:7574_solr"]
+ },
+ "live_nodes":[
+ "127.0.1.1:7574_solr",
+ "127.0.1.1:7500_solr",
+ "127.0.1.1:8983_solr",
+ "127.0.1.1:8900_solr"]
+ }
+}
+----
+
+
+[[clusterprop]]
+== CLUSTERPROP: Cluster Properties
+
+Add, edit or delete a cluster-wide property.
+
+`/admin/collections?action=CLUSTERPROP&name=_propertyName_&val=_propertyValue_`
+
+=== CLUSTERPROP Parameters
+
+`name`::
+The name of the property. Supported properties names are `urlScheme` and `autoAddReplicas and location`. Other names are rejected with an error.
+
+`val`::
+The value of the property. If the value is empty or null, the property is unset.
+
+=== CLUSTERPROP Response
+
+The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.
+
+=== Examples using CLUSTERPROP
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=CLUSTERPROP&name=urlScheme&val=https&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">0</int>
+ </lst>
+</response>
+----
+
+=== Deeply Nested Cluster Properties ===
+
+==== `collectionDefaults` ====
+It is possible to set cluster-wide default values for certain attributes of a collection.
+
+
+*Example 1: Set/update default values*
+[source]
+----
+curl -X POST -H 'Content-type:application/json' --data-binary '
+{ "set-obj-property" : {
+ "collectionDefaults" : {
+ "numShards" : 2,
+ "nrtReplicas" : 1,
+ "tlogReplicas" : 1,
+ "pullReplicas" : 1,
+
+ }
+}' http://localhost:8983/api/cluster
+----
+
+*Example 2: Unset the value of `nrtReplicas` alone*
+[source]
+----
+curl -X POST -H 'Content-type:application/json' --data-binary '
+{ "set-obj-property" : {
+ "collectionDefaults" : {
+ "nrtReplicas" : null,
+ }
+}' http://localhost:8983/api/cluster
+----
+
+*Example 2: Unset all values in `collectionDefaults`*
+[source]
+----
+curl -X POST -H 'Content-type:application/json' --data-binary '
+{ "set-obj-property" : {
+ "collectionDefaults" : null
+}' http://localhost:8983/api/cluster
+----
+
+[[balanceshardunique]]
+== BALANCESHARDUNIQUE: Balance a Property Across Nodes
+
+`/admin/collections?action=BALANCESHARDUNIQUE&collection=_collectionName_&property=_propertyName_`
+
+Insures that a particular property is distributed evenly amongst the physical nodes that make up a collection. If the property already exists on a replica, every effort is made to leave it there. If the property is *not* on any replica on a shard, one is chosen and the property is added.
+
+=== BALANCESHARDUNIQUE Parameters
+
+`collection`::
+The name of the collection to balance the property in. This parameter is required.
+
+`property`::
+The property to balance. The literal `property.` is prepended to this property if not specified explicitly. This parameter is required.
+
+`onlyactivenodes`::
+Defaults to `true`. Normally, the property is instantiated on active nodes only. If this parameter is specified as `false`, then inactive nodes are also included for distribution.
+
+`shardUnique`::
+Something of a safety valve. There is one pre-defined property (`preferredLeader`) that defaults this value to `true`. For all other properties that are balanced, this must be set to `true` or an error message will be returned.
+
+=== BALANCESHARDUNIQUE Response
+
+The response will include the status of the request. If the status is anything other than "0", an error message will explain why the request failed.
+
+=== Examples using BALANCESHARDUNIQUE
+
+*Input*
+
+Either of these commands would put the "preferredLeader" property on one replica in every shard in the "collection1" collection.
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=BALANCESHARDUNIQUE&collection=collection1&property=preferredLeader&wt=xml
+
+http://localhost:8983/solr/admin/collections?action=BALANCESHARDUNIQUE&collection=collection1&property=property.preferredLeader&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">9</int>
+ </lst>
+</response>
+----
+
+Examining the clusterstate after issuing this call should show exactly one replica in each shard that has this property.
+
+[[utilizenode]]
+== UTILIZENODE: Utilize a New Node
+
+This command can be used to move some replicas from the existing nodes to either a new node or a less loaded node to reduce the load on the existing node.
+
+This uses your autoscaling policies and preferences to identify which replica needs to be moved. It tries to fix any policy violations first and then it tries to move some load off of the most loaded nodes according to the preferences.
+
+`/admin/collections?action=UTILIZENODE&node=nodeName`
+
+=== UTILIZENODE Parameters
+
+`node`:: The name of the node that needs to be utilized. This parameter is required.
+
+
+[[replacenode]]
+== REPLACENODE: Move All Replicas in a Node to Another
+
+This command recreates replicas in one node (the source) to another node(s) (the target). After each replica is copied, the replicas in the source node are deleted.
+
+For source replicas that are also shard leaders the operation will wait for the number of seconds set with the `timeout` parameter to make sure there's an active replica that can become a leader (either an existing replica becoming a leader or the new replica completing recovery and becoming a leader).
+
+The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the new replicas but only when an Autoscaling policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Preferences>> section for more details.
+
+`/admin/collections?action=REPLACENODE&sourceNode=_source-node_&targetNode=_target-node_`
+
+=== REPLACENODE Parameters
+
+`sourceNode`::
+The source node from which the replicas need to be copied from. This parameter is required.
+
+`targetNode`::
+The target node where replicas will be copied. If this parameter is not provided, Solr will identify nodes automatically based on policies or number of cores in each node.
+
+`parallel`::
+If this flag is set to `true`, all replicas are created in separate threads. Keep in mind that this can lead to very high network and disk I/O if the replicas have very large indices. The default is `false`.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+`timeout`::
+Time in seconds to wait until new replicas are created, and until leader replicas are fully recovered. The default is `300`, or 5 minutes.
+
+[IMPORTANT]
+====
+This operation does not hold necessary locks on the replicas that belong to on the source node. So don't perform other collection operations in this period.
+====
+
+
+
+== DELETENODE: Delete Replicas in a Node
+
+Deletes all replicas of all collections in that node. Please note that the node itself will remain as a live node after this operation.
+
+`/admin/collections?action=DELETENODE&node=nodeName`
+
+=== DELETENODE Parameters
+
+`node`::
+The node to be removed. This parameter is required.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+
+[[addrole]]
+== ADDROLE: Add a Role
+
+`/admin/collections?action=ADDROLE&role=_roleName_&node=_nodeName_`
+
+Assigns a role to a given node in the cluster. The only supported role is `overseer`.
+
+Use this command to dedicate a particular node as Overseer. Invoke it multiple times to add more nodes. This is useful in large clusters where an Overseer is likely to get overloaded. If available, one among the list of nodes which are assigned the 'overseer' role would become the overseer. The system would assign the role to any other node if none of the designated nodes are up and running.
+
+=== ADDROLE Parameters
+
+`role`::
+The name of the role. The only supported role as of now is `overseer`. This parameter is required.
+
+`node`::
+The name of the node that will be assigned the role. It is possible to assign a role even before that node is started. This parameter is started.
+
+=== ADDROLE Response
+
+The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.
+
+=== Examples using ADDROLE
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=ADDROLE&role=overseer&node=192.167.1.2:8983_solr&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">0</int>
+ </lst>
+</response>
+----
+
+[[removerole]]
+== REMOVEROLE: Remove Role
+
+Remove an assigned role. This API is used to undo the roles assigned using ADDROLE operation
+
+`/admin/collections?action=REMOVEROLE&role=_roleName_&node=_nodeName_`
+
+=== REMOVEROLE Parameters
+
+`role`::
+The name of the role. The only supported role as of now is `overseer`. This parameter is required.
+
+`node`::
+The name of the node where the role should be removed.
+
+
+=== REMOVEROLE Response
+
+The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.
+
+=== Examples using REMOVEROLE
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=REMOVEROLE&role=overseer&node=192.167.1.2:8983_solr&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">0</int>
+ </lst>
+</response>
+----
+
+[[overseerstatus]]
+== OVERSEERSTATUS: Overseer Status and Statistics
+
+Returns the current status of the overseer, performance statistics of various overseer APIs, and the last 10 failures per operation type.
+
+`/admin/collections?action=OVERSEERSTATUS`
+
+=== Examples using OVERSEERSTATUS
+
+*Input:*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=OVERSEERSTATUS
+----
+
+[source,json]
+----
+{
+ "responseHeader":{
+ "status":0,
+ "QTime":33},
+ "leader":"127.0.1.1:8983_solr",
+ "overseer_queue_size":0,
+ "overseer_work_queue_size":0,
+ "overseer_collection_queue_size":2,
+ "overseer_operations":[
+ "createcollection",{
+ "requests":2,
+ "errors":0,
+ "avgRequestsPerSecond":0.7467088842794136,
+ "5minRateRequestsPerSecond":7.525069023276674,
+ "15minRateRequestsPerSecond":10.271274280947182,
+ "avgTimePerRequest":0.5050685,
+ "medianRequestTime":0.5050685,
+ "75thPcRequestTime":0.519016,
+ "95thPcRequestTime":0.519016,
+ "99thPcRequestTime":0.519016,
+ "999thPcRequestTime":0.519016},
+ "removeshard",{
+ "..."
+ }],
+ "collection_operations":[
+ "splitshard",{
+ "requests":1,
+ "errors":1,
+ "recent_failures":[{
+ "request":{
+ "operation":"splitshard",
+ "shard":"shard2",
+ "collection":"example1"},
+ "response":[
+ "Operation splitshard caused exception:","org.apache.solr.common.SolrException:org.apache.solr.common.SolrException: No shard with the specified name exists: shard2",
+ "exception",{
+ "msg":"No shard with the specified name exists: shard2",
+ "rspCode":400}]}],
+ "avgRequestsPerSecond":0.8198143044809885,
+ "5minRateRequestsPerSecond":8.043840552427673,
+ "15minRateRequestsPerSecond":10.502079828515368,
+ "avgTimePerRequest":2952.7164175,
+ "medianRequestTime":2952.7164175000003,
+ "75thPcRequestTime":5904.384052,
+ "95thPcRequestTime":5904.384052,
+ "99thPcRequestTime":5904.384052,
+ "999thPcRequestTime":5904.384052},
+ "..."
+ ],
+ "overseer_queue":[
+ "..."
+ ],
+ "..."
+ }
+----
+
+
+[[migratestateformat]]
+== MIGRATESTATEFORMAT: Migrate Cluster State
+
+A expert level utility API to move a collection from shared `clusterstate.json` ZooKeeper node (created with `stateFormat=1`, the default in all Solr releases prior to 5.0) to the per-collection `state.json` stored in ZooKeeper (created with `stateFormat=2`, the current default) seamlessly without any application down-time.
+
+`/admin/collections?action=MIGRATESTATEFORMAT&collection=<collection_name>`
+
+=== MIGRATESTATEFORMAT Parameters
+
+`collection`::
+The name of the collection to be migrated from `clusterstate.json` to its own `state.json` ZooKeeper node. This parameter is required.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+This API is useful in migrating any collections created prior to Solr 5.0 to the more scalable cluster state format now used by default. If a collection was created in any Solr 5.x version or higher, then executing this command is not necessary.
diff --git a/solr/solr-ref-guide/src/collection-aliasing.adoc b/solr/solr-ref-guide/src/collection-aliasing.adoc
new file mode 100644
index 0000000..f4cbc51
--- /dev/null
+++ b/solr/solr-ref-guide/src/collection-aliasing.adoc
@@ -0,0 +1,394 @@
+= Collection Aliasing
+:page-tocclass: right
+:page-toclevels: 1
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements. See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership. The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License. You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied. See the License for the
+// specific language governing permissions and limitations
+// under the License.
+
+A collection alias is a virtual collection which Solr treats the same as a normal collection. The alias collection may point to one or more real collections.
+
+Some use cases for collection aliasing:
+
+* Time series data
+* Reindexing content behind the scenes
+
+[[createalias]]
+== CREATEALIAS: Create or Modify an Alias for a Collection
+
+The `CREATEALIAS` action will create a new alias pointing to one or more collections.
+Aliases come in 2 flavors: standard and routed.
+
+*Standard aliases* are simple: CREATEALIAS registers the alias name with the names of one or more collections provided
+ by the command.
+If an existing alias exists, it is replaced/updated.
+A standard alias can serve to have the appearance of renaming a collection, and can be used to atomically swap
+which backing/underlying collection is "live" for various purposes.
+When Solr searches an alias pointing to multiple collections, Solr will search all shards of all the collections as an
+ aggregated whole.
+While it is possible to send updates to an alias spanning multiple collections, standard aliases have no logic for
+ distributing documents among the referenced collections so all updates will go to the first collection in the list.
+
+`/admin/collections?action=CREATEALIAS&name=_name_&collections=_collectionlist_`
+
+*Routed aliases* are aliases with additional capabilities to act as a kind of super-collection -- routing
+ updates to the correct collection.
+Since the only routing strategy at present is time oriented, these are also called *Time Routed Aliases* (TRAs).
+A TRA manages an alias and a time sequential series of collections that it will both create and optionally delete on-demand.
+See <<time-routed-aliases.adoc#time-routed-aliases,Time Routed Aliases>> for some important high-level information
+ before getting started.
+
+NOTE: Presently this is only supported for temporal fields stored as a
+<<field-types-included-with-solr.adoc#field-types-included-with-solr,DatePointField or TrieDateField>> type. Other
+well ordered field types may be added in future versions.
+
+[source,text]
+----
+localhost:8983/solr/admin/collections?action=CREATEALIAS&name=timedata&router.start=NOW/DAY&router.field=evt_dt&router.name=time&router.interval=%2B1DAY&router.maxFutureMs=3600000&create-collection.collection.configName=myConfig&create-collection.numShards=2
+----
+
+If run on Jan 15, 2018, the above will create an alias named timedata, that contains collections with names prefixed
+with `timedata` and an initial collection named `timedata_2018_01_15` will be created immediately. Updates sent to this
+alias with a (required) value in `evt_dt` that is before or after 2018-01-15 will be rejected, until the last 60
+minutes of 2018-01-15. After 2018-01-15T23:00:00 documents for either 2018-01-15 or 2018-01-16 will be accepted.
+As soon as the system receives a document for an allowable time window for which there is no collection it will
+automatically create the next required collection (and potentially any intervening collections if `router.interval` is
+smaller than `router.maxFutureMs`). Both the initial collection and any subsequent collections will be created using
+the specified configset. All collection creation parameters other than `name` are allowed, prefixed
+by `create-collection.`
+
+This means that one could, for example, partition their collections by day, and within each daily collection route
+the data to shards based on customer id. Such shards can be of any type (NRT, PULL or TLOG), and rule-based replica
+placement strategies may also be used.
+
+The values supplied in this command for collection creation will be retained
+in alias properties, and can be verified by inspecting `aliases.json` in ZooKeeper.
+
+NOTE: Presently only updates are routed and queries are distributed to all collections in the alias, but future
+features may enable routing of the query to the single appropriate collection based on a special parameter or perhaps
+a filter on the routed field.
+
+=== CREATEALIAS Parameters
+
+`name`::
+The alias name to be created. This parameter is required. If the alias is to be routed it also functions
+as a prefix for the names of the dependent collections that will be created. It must therefore adhere to normal
+requirements for collection naming.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+==== Standard Alias Parameters
+
+`collections`::
+A comma-separated list of collections to be aliased. The collections must already exist in the cluster.
+This parameter signals the creation of a standard alias. If it is present all routing parameters are
+prohibited. If routing parameters are present this parameter is prohibited.
+
+==== Routed Alias Parameters
+
+Most routed alias parameters become _alias properties_ that can subsequently be inspected and <<aliasprop,modified>>.
+
+`router.start`::
+The start date/time of data for this time routed alias in Solr's standard date/time format (i.e., ISO-8601 or "NOW"
+optionally with <<working-with-dates.adoc#date-math,date math>>).
++
+The first collection created for the alias will be internally named after this value.
+If a document is submitted with an earlier value for router.field then the earliest collection the alias points to then
+it will yield an error since it can't be routed. This date/time MUST NOT have a milliseconds component other than 0.
+Particularly, this means `NOW` will fail 999 times out of 1000, though `NOW/SECOND`, `NOW/MINUTE`, etc. will work
+just fine. This parameter is required.
+
+`TZ`::
+The timezone to be used when evaluating any date math in router.start or router.interval. This is equivalent to the
+same parameter supplied to search queries, but understand in this case it's persisted with most of the other parameters
+as an alias property.
++
+If GMT-4 is supplied for this value then a document dated 2018-01-14T21:00:00:01.2345Z would be stored in the
+myAlias_2018-01-15_01 collection (assuming an interval of +1HOUR).
++
+The default timezone is UTC.
+
+`router.field`::
+The date field to inspect to determine which underlying collection an incoming document should be routed to.
+This field is required on all incoming documents.
+
+`router.name`::
+The type of routing to use. Presently only `time` is valid. This parameter is required.
+
+`router.interval`::
+A date math expression that will be appended to a timestamp to determine the next collection in the series.
+Any date math expression that can be evaluated if appended to a timestamp of the form 2018-01-15T16:17:18 will
+work here.
++
+This parameter is required.
+
+`router.maxFutureMs`::
+The maximum milliseconds into the future that a document is allowed to have in `router.field` for it to be accepted
+without error. If there was no limit, than an erroneous value could trigger many collections to be created.
++
+The default is 10 minutes.
+
+`router.autoDeleteAge`::
+A date math expression that results in the oldest collections getting deleted automatically.
++
+The date math is relative to the timestamp of a newly created collection (typically close to the current time),
+and thus this must produce an earlier time via rounding and/or subtracting.
+Collections to be deleted must have a time range that is entirely before the computed age.
+Collections are considered for deletion immediately prior to new collections getting created.
+Example: `/DAY-90DAYS`.
++
+The default is not to delete.
+
+`create-collection.*`::
+The * wildcard can be replaced with any parameter from the <<collection-management.adoc#create,CREATE>> command except `name`. All other fields
+are identical in requirements and naming except that we insist that the configset be explicitly specified.
+The configset must be created beforehand, either uploaded or copied and modified.
+It's probably a bad idea to use "data driven" mode as schema mutations might happen concurrently leading to errors.
+
+=== CREATEALIAS Response
+
+The output will simply be a responseHeader with details of the time it took to process the request.
+To confirm the creation of the alias, you can look in the Solr Admin UI, under the Cloud section and find the
+`aliases.json` file. The initial collection for routed aliases should also be visible in various parts of the admin UI.
+
+=== Examples using CREATEALIAS
+
+*Input*
+
+Create an alias named "testalias" and link it to the collections named "anotherCollection" and "testCollection".
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=CREATEALIAS&name=testalias&collections=anotherCollection,testCollection&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">122</int>
+ </lst>
+</response>
+----
+
+Create an alias named "myTimeData" for data begining on `2018-01-15` in the UTC time zone and partitioning daily
+based on the `evt_dt` field in the incomming documents. Data more than an hour beyond the latest (most recent)
+partiton is to be rejected and collections are created using a config set named myConfig and
+
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=CREATEALIAS&name=myTimeData&router.start=NOW/DAY&router.field=evt_dt&router.name=time&router.interval=%2B1DAY&router.maxFutureMs=3600000&create-collection.collection.configName=myConfig&create-collection.numShards=2
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1234</int>
+ </lst>
+</response>
+----
+
+A somewhat contrived example demonstrating the <<v2-api.adoc#top-v2-api,V2 API>> usage and additional collection creation options.
+Notice that the collection creation parameters follow the v2 API naming convention, not the v1 naming conventions.
+
+*Input*
+
+[source,json]
+----
+POST /api/c
+{
+ "create-routed-alias" : {
+ "name": "somethingTemporalThisWayComes",
+ "router" : {
+ "name": "time",
+ "field": "evt_dt",
+ "start":"NOW/MINUTE",
+ "interval":"+2HOUR",
+ "maxFutureMs":"14400000"
+ },
+ "create-collection" : {
+ "config":"_default",
+ "router": {
+ "name":"implicit",
+ "field":"foo_s"
+ },
+ "shards":"foo,bar,baz",
+ "numShards": 3,
+ "tlogReplicas":1,
+ "pullReplicas":1,
+ "maxShardsPerNode":2,
+ "properties" : {
+ "foobar":"bazbam"
+ }
+ }
+ }
+}
+----
+
+*Output*
+
+[source,xml]
+----
+{
+ "responseHeader": {
+ "status": 0,
+ "QTime": 1234
+ }
+}
+----
+
+[[listaliases]]
+== LISTALIASES: List of all aliases in the cluster
+
+`/admin/collections?action=LISTALIASES`
+
+The LISTALIASES action does not take any parameters.
+
+=== LISTALIASES Response
+
+The output will contain a list of aliases with the corresponding collection names.
+
+=== Examples using LISTALIASES
+
+*Input*
+
+List the existing aliases, requesting information as XML from Solr:
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=LISTALIASES&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">0</int>
+ </lst>
+ <lst name="aliases">
+ <str name="testalias1">collection1</str>
+ <str name="testalias2">collection1,collection2</str>
+ </lst>
+ <lst name="properties">
+ <lst name="testalias1"/>
+ <lst name="testalias2">
+ <str name="someKey">someValue</str>
+ </lst>
+ </lst>
+</response>
+----
+
+[[aliasprop]]
+== ALIASPROP: Modify Alias Properties for a Collection
+
+The `ALIASPROP` action modifies the properties (metadata) on an alias. If a key is set with a value that is empty it will be removed.
+
+`/admin/collections?action=ALIASPROP&name=_name_&property.someKey=somevalue`
+
+=== ALIASPROP Parameters
+
+`name`::
+The alias name on which to set properties. This parameter is required.
+
+`property.*`::
+The name of the property to be modified replaces '*', the value for the parameter is passed as the value for the property.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+=== ALIASPROP Response
+
+The output will simply be a responseHeader with details of the time it took to process the request.
+To confirm the creation of the property or properties, you can look in the Solr Admin UI, under the Cloud section and
+find the `aliases.json` file or use the LISTALIASES api command.
+
+=== Examples using ALIASPROP
+
+*Input*
+
+For an alias named "testalias2" and set the value "someValue" for a property of "someKey" and "otherValue" for "otherKey".
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=ALIASPROP&name=testalias2&property.someKey=someValue&property.otherKey=otherValue&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">122</int>
+ </lst>
+</response>
+----
+
+[[deletealias]]
+== DELETEALIAS: Delete a Collection Alias
+
+`/admin/collections?action=DELETEALIAS&name=_name_`
+
+=== DELETEALIAS Parameters
+
+`name`::
+The name of the alias to delete. This parameter is required.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+=== DELETEALIAS Response
+
+The output will simply be a responseHeader with details of the time it took to process the request.
+To confirm the removal of the alias, you can look in the Solr Admin UI, under the Cloud section, and
+find the `aliases.json` file.
+
+=== Examples using DELETEALIAS
+
+*Input*
+
+Remove the alias named "testalias".
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=DELETEALIAS&name=testalias&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">117</int>
+ </lst>
+</response>
+----
diff --git a/solr/solr-ref-guide/src/collection-management.adoc b/solr/solr-ref-guide/src/collection-management.adoc
new file mode 100644
index 0000000..1865b03
--- /dev/null
+++ b/solr/solr-ref-guide/src/collection-management.adoc
@@ -0,0 +1,752 @@
+= Collection Management Commands
+:page-tocclass: right
+:page-toclevels: 1
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements. See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership. The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License. You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied. See the License for the
+// specific language governing permissions and limitations
+// under the License.
+
+A collection is a single logical index that uses a single Solr configuration file (`solrconfig.xml`) and a single index schema.
+
+[[create]]
+== CREATE: Create a Collection
+
+`/admin/collections?action=CREATE&name=_name_`
+
+=== CREATE Parameters
+
+The CREATE action allows the following parameters:
+
+`name`::
+The name of the collection to be created. This parameter is required.
+
+`router.name`::
+The router name that will be used. The router defines how documents will be distributed among the shards. Possible values are `implicit` or `compositeId`, which is the default.
++
+The `implicit` router does not automatically route documents to different shards. Whichever shard you indicate on the indexing request (or within each document) will be used as the destination for those documents.
++
+The `compositeId` router hashes the value in the uniqueKey field and looks up that hash in the collection's clusterstate to determine which shard will receive the document, with the additional ability to manually direct the routing.
++
+When using the `implicit` router, the `shards` parameter is required. When using the `compositeId` router, the `numShards` parameter is required.
++
+For more information, see also the section <<shards-and-indexing-data-in-solrcloud.adoc#document-routing,Document Routing>>.
+
+`numShards`::
+The number of shards to be created as part of the collection. This is a required parameter when the `router.name` is `compositeId`.
+
+`shards`::
+A comma separated list of shard names, e.g., `shard-x,shard-y,shard-z`. This is a required parameter when the `router.name` is `implicit`.
+
+`replicationFactor`::
+The number of replicas to be created for each shard. The default is `1`.
++
+This will create a NRT type of replica. If you want another type of replica, see the `tlogReplicas` and `pullReplica` parameters below. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
+
+`nrtReplicas`::
+The number of NRT (Near-Real-Time) replicas to create for this collection. This type of replica maintains a transaction log and updates its index locally. If you want all of your replicas to be of this type, you can simply use `replicationFactor` instead.
+
+`tlogReplicas`::
+The number of TLOG replicas to create for this collection. This type of replica maintains a transaction log but only updates its index via replication from a leader. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
+
+`pullReplicas`::
+The number of PULL replicas to create for this collection. This type of replica does not maintain a transaction log and only updates its index via replication from a leader. This type is not eligible to become a leader and should not be the only type of replicas in the collection. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
+
+`maxShardsPerNode`::
+When creating collections, the shards and/or replicas are spread across all available (i.e., live) nodes, and two replicas of the same shard will never be on the same node.
++
+If a node is not live when the CREATE action is called, it will not get any parts of the new collection, which could lead to too many replicas being created on a single live node. Defining `maxShardsPerNode` sets a limit on the number of replicas the CREATE action will spread to each node.
++
+If the entire collection can not be fit into the live nodes, no collection will be created at all. The default `maxShardsPerNode` value is `1`.
+
+`createNodeSet`::
+Allows defining the nodes to spread the new collection across. The format is a comma-separated list of node_names, such as `localhost:8983_solr,localhost:8984_solr,localhost:8985_solr`.
++
+If not provided, the CREATE operation will create shard-replicas spread across all live Solr nodes.
++
+Alternatively, use the special value of `EMPTY` to initially create no shard-replica within the new collection and then later use the <<replica-management.adoc#addreplica,ADDREPLICA>> operation to add shard-replicas when and where required.
+
+`createNodeSet.shuffle`::
+Controls wether or not the shard-replicas created for this collection will be assigned to the nodes specified by the `createNodeSet` in a sequential manner, or if the list of nodes should be shuffled prior to creating individual replicas.
++
+A `false` value makes the results of a collection creation predictable and gives more exact control over the location of the individual shard-replicas, but `true` can be a better choice for ensuring replicas are distributed evenly across nodes. The default is `true`.
++
+This parameter is ignored if `createNodeSet` is not also specified.
+
+`collection.configName`::
+Defines the name of the configuration (which *must already be stored in ZooKeeper*) to use for this collection. If not provided, Solr will use the configuration of `_default` configSet to create a new (and mutable) configSet named `<collectionName>.AUTOCREATED` and will use it for the new collection. When such a collection (that uses a copy of the _default configset) is deleted, the autocreated configset is not deleted by default.
+
+`router.field`::
+If this parameter is specified, the router will look at the value of the field in an input document to compute the hash and identify a shard instead of looking at the `uniqueKey` field. If the field specified is null in the document, the document will be rejected.
++
+Please note that <<realtime-get.adoc#realtime-get,RealTime Get>> or retrieval by document ID would also require the parameter `\_route_` (or `shard.keys`) to avoid a distributed search.
+
+`property._name_=_value_`::
+Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
+
+`autoAddReplicas`::
+When set to `true`, enables automatic addition of replicas when the number of active replicas falls below the value set for `replicationFactor`. This may occur if a replica goes down, for example. The default is `false`, which means new replicas will not be added.
++
+While this parameter is provided as part of Solr's set of features to provide autoscaling of clusters, it is available even when you have not implemented any other part of autoscaling (such as a policy). See the section <<solrcloud-autoscaling-auto-add-replicas.adoc#the-autoaddreplicas-parameter,SolrCloud Autoscaling Automatically Adding Replicas>> for more details about this option and how it can be used.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+`rule`::
+Replica placement rules. See the section <<rule-based-replica-placement.adoc#rule-based-replica-placement,Rule-based Replica Placement>> for details.
+
+`snitch`::
+Details of the snitch provider. See the section <<rule-based-replica-placement.adoc#rule-based-replica-placement,Rule-based Replica Placement>> for details.
+
+`policy`:: Name of the collection-level policy. See <<solrcloud-autoscaling-policy-preferences.adoc#collection-specific-policy, Defining Collection-Specific Policies >> for details.
+
+`waitForFinalState`::
+If `true`, the request will complete only when all affected replicas become active. The default is `false`, which means that the API will return the status of the single action, which may be before the new replica is online and active.
+
+`withCollection`::
+The name of the collection with which all replicas of this collection must be co-located. The collection must already exist and must have a single shard named `shard1`.
+See <<colocating-collections.adoc#colocating-collections, Colocating collections>> for more details.
+
+=== CREATE Response
+
+The response will include the status of the request and the new core names. If the status is anything other than "success", an error message will explain why the request failed.
+
+=== Examples using CREATE
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=CREATE&name=newCollection&numShards=2&replicationFactor=1&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">3764</int>
+ </lst>
+ <lst name="success">
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">3450</int>
+ </lst>
+ <str name="core">newCollection_shard1_replica1</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">3597</int>
+ </lst>
+ <str name="core">newCollection_shard2_replica1</str>
+ </lst>
+ </lst>
+</response>
+----
+
+[[reload]]
+== RELOAD: Reload a Collection
+
+`/admin/collections?action=RELOAD&name=_name_`
+
+The RELOAD action is used when you have changed a configuration in ZooKeeper.
+
+=== RELOAD Parameters
+
+`name`::
+The name of the collection to reload. This parameter is required.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+=== RELOAD Response
+
+The response will include the status of the request and the cores that were reloaded. If the status is anything other than "success", an error message will explain why the request failed.
+
+=== Examples using RELOAD
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=RELOAD&name=newCollection&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1551</int>
+ </lst>
+ <lst name="success">
+ <lst name="10.0.1.6:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">761</int>
+ </lst>
+ </lst>
+ <lst name="10.0.1.4:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1527</int>
+ </lst>
+ </lst>
+ </lst>
+</response>
+----
+
+
+[[modifycollection]]
+== MODIFYCOLLECTION: Modify Attributes of a Collection
+
+`/admin/collections?action=MODIFYCOLLECTION&collection=_<collection-name>_&__<attribute-name>__=__<attribute-value>__&__<another-attribute-name>__=__<another-value>__&__<yet_another_attribute_name>__=`
+
+It's possible to edit multiple attributes at a time. Changing these values only updates the z-node on ZooKeeper, they do not change the topology of the collection. For instance, increasing `replicationFactor` will _not_ automatically add more replicas to the collection but _will_ allow more ADDREPLICA commands to succeed.
+
+An attribute can be deleted by passing an empty value. For example, `yet_another_attribute_name=` (with no value) will delete the `yet_another_attribute_name` parameter from the collection.
+
+=== MODIFYCOLLECTION Parameters
+
+`collection`::
+The name of the collection to be modified. This parameter is required.
+
+`_attribute_=_value_`::
+Key-value pairs of attribute names and attribute values.
+
+At least one `_attribute_` parameter is required.
+
+The attributes that can be modified are:
+
+* maxShardsPerNode
+* replicationFactor
+* autoAddReplicas
+* collection.configName
+* rule
+* snitch
+* policy
+* withCollection
+
+See the <<create,CREATE action>> section above for details on these attributes.
+
+[[list]]
+== LIST: List Collections
+
+Fetch the names of the collections in the cluster.
+
+`/admin/collections?action=LIST`
+
+=== Examples using LIST
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=LIST
+----
+
+*Output*
+
+[source,json]
+----
+{
+ "responseHeader":{
+ "status":0,
+ "QTime":2011},
+ "collections":["collection1",
+ "example1",
+ "example2"]}
+----
+
+[[delete]]
+== DELETE: Delete a Collection
+
+`/admin/collections?action=DELETE&name=_collection_`
+
+=== DELETE Parameters
+
+`name`::
+The name of the collection to delete. This parameter is required.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+=== DELETE Response
+
+The response will include the status of the request and the cores that were deleted. If the status is anything other than "success", an error message will explain why the request failed.
+
+=== Examples using DELETE
+
+*Input*
+
+Delete the collection named "newCollection".
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=DELETE&name=newCollection&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">603</int>
+ </lst>
+ <lst name="success">
+ <lst name="10.0.1.6:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">19</int>
+ </lst>
+ </lst>
+ <lst name="10.0.1.4:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">67</int>
+ </lst>
+ </lst>
+ </lst>
+</response>
+----
+
+[[collectionprop]]
+== COLLECTIONPROP: Collection Properties
+
+Add, edit or delete a collection property.
+
+`/admin/collections?action=COLLECTIONPROP&name=_collectionName_&propertyName=_propertyName_&propertyValue=_propertyValue_`
+
+=== COLLECTIONPROP Parameters
+
+`name`::
+The name of the collection for which the property would be set.
+
+`propertyName`::
+The name of the property.
+
+`propertyValue`::
+The value of the property. When not provided, the property is deleted.
+
+=== COLLECTIONPROP Response
+
+The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.
+
+=== Examples using COLLECTIONPROP
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=COLLECTIONPROP&name=coll&propertyName=foo&val=bar&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">0</int>
+ </lst>
+</response>
+----
+
+[[backup]]
+== BACKUP: Backup Collection
+
+Backs up Solr collections and associated configurations to a shared filesystem - for example a Network File System.
+
+`/admin/collections?action=BACKUP&name=myBackupName&collection=myCollectionName&location=/path/to/my/shared/drive`
+
+The BACKUP command will backup Solr indexes and configurations for a specified collection. The BACKUP command takes one copy from each shard for the indexes. For configurations, it backs up the configSet that was associated with the collection and metadata.
+
+=== BACKUP Parameters
+
+`collection`::
+The name of the collection to be backed up. This parameter is required.
+
+`location`::
+The location on a shared drive for the backup command to write to. Alternately it can be set as a <<cluster-node-management.adoc#clusterprop,cluster property>>.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+`repository`::
+The name of a repository to be used for the backup. If no repository is specified then the local filesystem repository will be used automatically.
+
+[[restore]]
+== RESTORE: Restore Collection
+
+Restores Solr indexes and associated configurations.
+
+`/admin/collections?action=RESTORE&name=myBackupName&location=/path/to/my/shared/drive&collection=myRestoredCollectionName`
+
+The RESTORE operation will create a collection with the specified name in the collection parameter. You cannot restore into the same collection the backup was taken from. Also the target collection should not be present at the time the API is called as Solr will create it for you.
+
+The collection created will be have the same number of shards and replicas as the original collection, preserving routing information, etc. Optionally, you can override some parameters documented below.
+
+While restoring, if a configSet with the same name exists in ZooKeeper then Solr will reuse that, or else it will upload the backed up configSet in ZooKeeper and use that.
+
+You can use the collection <<collection-aliasing.adoc#createalias,CREATEALIAS>> command to make sure clients don't need to change the endpoint to query or index against the newly restored collection.
+
+=== RESTORE Parameters
+
+`collection`::
+The collection where the indexes will be restored into. This parameter is required.
+
+`location`::
+The location on a shared drive for the RESTORE command to read from. Alternately it can be set as a <<cluster-node-management.adoc#clusterprop,cluster property>>.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+`repository`::
+The name of a repository to be used for the backup. If no repository is specified then the local filesystem repository will be used automatically.
+
+*Override Parameters*
+
+Additionally, there are several parameters that may have been set on the original collection that can be overridden when restoring the backup:
+
+`collection.configName`::
+Defines the name of the configurations to use for this collection. These must already be stored in ZooKeeper. If not provided, Solr will default to the collection name as the configuration name.
+
+`replicationFactor`::
+The number of replicas to be created for each shard.
+
+`nrtReplicas`::
+The number of NRT (Near-Real-Time) replicas to create for this collection. This type of replica maintains a transaction log and updates its index locally. This parameter behaves the same way as setting replicationFactor parameter.
+
+`tlogReplicas`::
+The number of TLOG replicas to create for this collection. This type of replica maintains a transaction log but only updates its index via replication from a leader. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
+
+`pullReplicas`::
+The number of PULL replicas to create for this collection. This type of replica does not maintain a transaction log and only updates its index via replication from a leader. This type is not eligible to become a leader and should not be the only type of replicas in the collection. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
+
+`maxShardsPerNode`::
+When creating collections, the shards and/or replicas are spread across all available (i.e., live) nodes, and two replicas of the same shard will never be on the same node.
++
+If a node is not live when the CREATE operation is called, it will not get any parts of the new collection, which could lead to too many replicas being created on a single live node. Defining `maxShardsPerNode` sets a limit on the number of replicas CREATE will spread to each node. If the entire collection can not be fit into the live nodes, no collection will be created at all.
+
+`autoAddReplicas`::
+When set to `true`, enables auto addition of replicas on shared file systems. See the section <<running-solr-on-hdfs.adoc#automatically-add-replicas-in-solrcloud,Automatically Add Replicas in SolrCloud>> for more details on settings and overrides.
+
+`property._name_=_value_`::
+Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
+
+
+[[migrate]]
+== MIGRATE: Migrate Documents to Another Collection
+
+`/admin/collections?action=MIGRATE&collection=_name_&split.key=_key1!_&target.collection=_target_collection_&forward.timeout=60`
+
+The MIGRATE command is used to migrate all documents having a given routing key to another collection. The source collection will continue to have the same data as-is but it will start re-routing write requests to the target collection for the number of seconds specified by the `forward.timeout` parameter. It is the responsibility of the user to switch to the target collection for reads and writes after the MIGRATE action completes.
+
+The routing key specified by the `split.key` parameter may span multiple shards on both the source and the target collections. The migration is performed shard-by-shard in a single thread. One or more temporary collections may be created by this command during the ‘migrate’ process but they are cleaned up at the end automatically.
+
+This is a long running operation and therefore using the `async` parameter is highly recommended. If the `async` parameter is not specified then the operation is synchronous by default and keeping a large read timeout on the invocation is advised. Even with a large read timeout, the request may still timeout but that doesn’t necessarily mean that the operation has failed. Users should check logs, cluster state, source and target collections before invoking the operation again.
+
+This command works only with collections using the compositeId router. The target collection must not receive any writes during the time the MIGRATE command is running otherwise some writes may be lost.
+
+Please note that the MIGRATE API does not perform any de-duplication on the documents so if the target collection contains documents with the same uniqueKey as the documents being migrated then the target collection will end up with duplicate documents.
+
+=== MIGRATE Parameters
+
+`collection`::
+The name of the source collection from which documents will be split. This parameter is required.
+
+`target.collection`::
+The name of the target collection to which documents will be migrated. This parameter is required.
+
+`split.key`::
+The routing key prefix. For example, if the uniqueKey of a document is "a!123", then you would use `split.key=a!`. This parameter is required.
+
+`forward.timeout`::
+The timeout, in seconds, until which write requests made to the source collection for the given `split.key` will be forwarded to the target shard. The default is 60 seconds.
+
+`property._name_=_value_`::
+Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+=== MIGRATE Response
+
+The response will include the status of the request.
+
+=== Examples using MIGRATE
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=MIGRATE&collection=test1&split.key=a!&target.collection=test2&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">19014</int>
+ </lst>
+ <lst name="success">
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1</int>
+ </lst>
+ <str name="core">test2_shard1_0_replica1</str>
+ <str name="status">BUFFERING</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">2479</int>
+ </lst>
+ <str name="core">split_shard1_0_temp_shard1_0_shard1_replica1</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1002</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">21</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1655</int>
+ </lst>
+ <str name="core">split_shard1_0_temp_shard1_0_shard1_replica2</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">4006</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">17</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1</int>
+ </lst>
+ <str name="core">test2_shard1_0_replica1</str>
+ <str name="status">EMPTY_BUFFER</str>
+ </lst>
+ <lst name="192.168.43.52:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">31</int>
+ </lst>
+ </lst>
+ <lst name="192.168.43.52:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">31</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1</int>
+ </lst>
+ <str name="core">test2_shard1_1_replica1</str>
+ <str name="status">BUFFERING</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1742</int>
+ </lst>
+ <str name="core">split_shard1_1_temp_shard1_1_shard1_replica1</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1002</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">15</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1917</int>
+ </lst>
+ <str name="core">split_shard1_1_temp_shard1_1_shard1_replica2</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">5007</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">8</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">1</int>
+ </lst>
+ <str name="core">test2_shard1_1_replica1</str>
+ <str name="status">EMPTY_BUFFER</str>
+ </lst>
+ <lst name="192.168.43.52:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">30</int>
+ </lst>
+ </lst>
+ <lst name="192.168.43.52:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">30</int>
+ </lst>
+ </lst>
+ </lst>
+</response>
+----
+
+[[rebalanceleaders]]
+== REBALANCELEADERS: Rebalance Leaders
+
+Reassigns leaders in a collection according to the preferredLeader property across active nodes.
+
+`/admin/collections?action=REBALANCELEADERS&collection=collectionName`
+
+Leaders are assigned in a collection according to the `preferredLeader` property on active nodes. This command should be run after the preferredLeader property has been assigned via the BALANCESHARDUNIQUE or ADDREPLICAPROP commands.
+
+NOTE: It is not _required_ that all shards in a collection have a `preferredLeader` property. Rebalancing will only attempt to reassign leadership to those replicas that have the `preferredLeader` property set to `true` _and_ are not currently the shard leader _and_ are currently active.
+
+=== REBALANCELEADERS Parameters
+
+`collection`::
+The name of the collection to rebalance `preferredLeaders` on. This parameter is required.
+
+`maxAtOnce`::
+The maximum number of reassignments to have queue up at once. Values \<=0 are use the default value Integer.MAX_VALUE.
++
+When this number is reached, the process waits for one or more leaders to be successfully assigned before adding more to the queue.
+
+`maxWaitSeconds`::
+Defaults to `60`. This is the timeout value when waiting for leaders to be reassigned. If `maxAtOnce` is less than the number of reassignments that will take place, this is the maximum interval that any _single_ wait for at least one reassignment.
++
+For example, if 10 reassignments are to take place and `maxAtOnce` is `1` and `maxWaitSeconds` is `60`, the upper bound on the time that the command may wait is 10 minutes.
+
+=== REBALANCELEADERS Response
+
+The response will include the status of the request. If the status is anything other than "0", an error message will explain why the request failed.
+
+=== Examples using REBALANCELEADERS
+
+*Input*
+
+Either of these commands would cause all the active replicas that had the `preferredLeader` property set and were _not_ already the preferred leader to become leaders.
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=REBALANCELEADERS&collection=collection1&wt=xml
+http://localhost:8983/solr/admin/collections?action=REBALANCELEADERS&collection=collection1&maxAtOnce=5&maxWaitSeconds=30&wt=xml
+----
+
+*Output*
+
+In this example, two replicas in the "alreadyLeaders" section already had the leader assigned to the same node as the `preferredLeader` property so no action was taken.
+
+The replica in the "inactivePreferreds" section had the `preferredLeader` property set but the node was down and no action was taken. The three nodes in the "successes" section were made leaders because they had the `preferredLeader` property set but were not leaders and they were active.
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">123</int>
+ </lst>
+ <lst name="alreadyLeaders">
+ <lst name="core_node1">
+ <str name="status">success</str>
+ <str name="msg">Already leader</str>
+ <str name="nodeName">192.168.1.167:7400_solr</str>
+ </lst>
+ <lst name="core_node17">
+ <str name="status">success</str>
+ <str name="msg">Already leader</str>
+ <str name="nodeName">192.168.1.167:7600_solr</str>
+ </lst>
+ </lst>
+ <lst name="inactivePreferreds">
+ <lst name="core_node4">
+ <str name="status">skipped</str>
+ <str name="msg">Node is a referredLeader, but it's inactive. Skipping</str>
+ <str name="nodeName">192.168.1.167:7500_solr</str>
+ </lst>
+ </lst>
+ <lst name="successes">
+ <lst name="_collection1_shard3_replica1">
+ <str name="status">success</str>
+ <str name="msg">
+ Assigned 'Collection: 'collection1', Shard: 'shard3', Core: 'collection1_shard3_replica1', BaseUrl:
+ 'http://192.168.1.167:8983/solr'' to be leader
+ </str>
+ </lst>
+ <lst name="_collection1_shard5_replica3">
+ <str name="status">success</str>
+ <str name="msg">
+ Assigned 'Collection: 'collection1', Shard: 'shard5', Core: 'collection1_shard5_replica3', BaseUrl:
+ 'http://192.168.1.167:7200/solr'' to be leader
+ </str>
+ </lst>
+ <lst name="_collection1_shard4_replica2">
+ <str name="status">success</str>
+ <str name="msg">
+ Assigned 'Collection: 'collection1', Shard: 'shard4', Core: 'collection1_shard4_replica2', BaseUrl:
+ 'http://192.168.1.167:7300/solr'' to be leader
+ </str>
+ </lst>
+ </lst>
+</response>
+----
+
+Examining the clusterstate after issuing this call should show that every live node that has the `preferredLeader` property should also have the "leader" property set to _true_.
diff --git a/solr/solr-ref-guide/src/collections-api.adoc b/solr/solr-ref-guide/src/collections-api.adoc
index c78db6d..14e10bb 100644
--- a/solr/solr-ref-guide/src/collections-api.adoc
+++ b/solr/solr-ref-guide/src/collections-api.adoc
@@ -1,6 +1,6 @@
= Collections API
-:page-toclevels: 1
-:page-tocclass: right
+:page-children: cluster-node-management, collection-management, collection-aliasing, shard-management, replica-management
+:page-toc: false
// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements. See the NOTICE file
// distributed with this work for additional information
@@ -18,208 +18,33 @@
// specific language governing permissions and limitations
// under the License.
-The Collections API is used to create, remove, or reload collections.
+A SolrCloud cluster includes a number of components. The Collections API is provided to allow you to control your cluster, including the collections, shards, replicas, backups, leader election, and other operations needs.
-In the context of SolrCloud you can use it to create collections with a specific number of shards and replicas, move replicas or shards, and create or delete collection aliases.
+Because this API has a large number of commands and options, we've grouped the commands into the following sub-sections:
-[[create]]
-== CREATE: Create a Collection
+*<<cluster-node-management.adoc#cluster-node-management,Cluster and Node Management>>*: Define properties for the entire cluster; check the status of a cluster; remove replicas from a node; utilize a newly added node; add or remove roles for a node.
-`/admin/collections?action=CREATE&name=_name_`
+*<<collection-management.adoc#collection-management,Collection Management>>*: Create, list, reload and delete collections; set collection properties; migrate documents to another collection; rebalance leaders; backup and restore collections.
-=== CREATE Parameters
+*<<collection-aliasing.adoc#collection-aliasing,Collection Aliasing>>*: Create, list or delete collection aliases; set alias properties.
-The CREATE action allows the following parameters:
+*<<shard-management.adoc#shard-management,Shard Management>>*: Create and delete a shard; split a shard into two or more additional shards; force a shard leader.
-`name`::
-The name of the collection to be created. This parameter is required.
+*<<replica-management.adoc#replica-management,Replica Management>>*: Add or delete a replica; set replica properties; move a replica to a different node.
-`router.name`::
-The router name that will be used. The router defines how documents will be distributed among the shards. Possible values are `implicit` or `compositeId`, which is the default.
-+
-The `implicit` router does not automatically route documents to different shards. Whichever shard you indicate on the indexing request (or within each document) will be used as the destination for those documents.
-+
-The `compositeId` router hashes the value in the uniqueKey field and looks up that hash in the collection's clusterstate to determine which shard will receive the document, with the additional ability to manually direct the routing.
-+
-When using the `implicit` router, the `shards` parameter is required. When using the `compositeId` router, the `numShards` parameter is required.
-+
-For more information, see also the section <<shards-and-indexing-data-in-solrcloud.adoc#document-routing,Document Routing>>.
-
-`numShards`::
-The number of shards to be created as part of the collection. This is a required parameter when the `router.name` is `compositeId`.
-
-`shards`::
-A comma separated list of shard names, e.g., `shard-x,shard-y,shard-z`. This is a required parameter when the `router.name` is `implicit`.
-
-`replicationFactor`::
-The number of replicas to be created for each shard. The default is `1`.
-+
-This will create a NRT type of replica. If you want another type of replica, see the `tlogReplicas` and `pullReplica` parameters below. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
-
-`nrtReplicas`::
-The number of NRT (Near-Real-Time) replicas to create for this collection. This type of replica maintains a transaction log and updates its index locally. If you want all of your replicas to be of this type, you can simply use `replicationFactor` instead.
-
-`tlogReplicas`::
-The number of TLOG replicas to create for this collection. This type of replica maintains a transaction log but only updates its index via replication from a leader. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
-
-`pullReplicas`::
-The number of PULL replicas to create for this collection. This type of replica does not maintain a transaction log and only updates its index via replication from a leader. This type is not eligible to become a leader and should not be the only type of replicas in the collection. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
-
-`maxShardsPerNode`::
-When creating collections, the shards and/or replicas are spread across all available (i.e., live) nodes, and two replicas of the same shard will never be on the same node.
-+
-If a node is not live when the CREATE action is called, it will not get any parts of the new collection, which could lead to too many replicas being created on a single live node. Defining `maxShardsPerNode` sets a limit on the number of replicas the CREATE action will spread to each node.
-+
-If the entire collection can not be fit into the live nodes, no collection will be created at all. The default `maxShardsPerNode` value is `1`. A value of `-1` means unlimited. If a `policy` is also specified then the stricter of `maxShardsPerNode` and policy rules apply.
-
-`createNodeSet`::
-Allows defining the nodes to spread the new collection across. The format is a comma-separated list of node_names, such as `localhost:8983_solr,localhost:8984_solr,localhost:8985_solr`.
-+
-If not provided, the CREATE operation will create shard-replicas spread across all live Solr nodes.
-+
-Alternatively, use the special value of `EMPTY` to initially create no shard-replica within the new collection and then later use the <<addreplica,ADDREPLICA>> operation to add shard-replicas when and where required.
-
-`createNodeSet.shuffle`::
-Controls whether or not the shard-replicas created for this collection will be assigned to the nodes specified by the `createNodeSet` in a sequential manner, or if the list of nodes should be shuffled prior to creating individual replicas.
-+
-A `false` value makes the results of a collection creation predictable and gives more exact control over the location of the individual shard-replicas, but `true` can be a better choice for ensuring replicas are distributed evenly across nodes. The default is `true`.
-+
-This parameter is ignored if `createNodeSet` is not also specified.
-
-`collection.configName`::
-Defines the name of the configuration (which *must already be stored in ZooKeeper*) to use for this collection. If not provided, Solr will use the configuration of `_default` configSet to create a new (and mutable) configSet named `<collectionName>.AUTOCREATED` and will use it for the new collection. When such a collection (that uses a copy of the _default configset) is deleted, the autocreated configset is not deleted by default.
-
-`router.field`::
-If this parameter is specified, the router will look at the value of the field in an input document to compute the hash and identify a shard instead of looking at the `uniqueKey` field. If the field specified is null in the document, the document will be rejected.
-+
-Please note that <<realtime-get.adoc#realtime-get,RealTime Get>> or retrieval by document ID would also require the parameter `\_route_` (or `shard.keys`) to avoid a distributed search.
-
-`property._name_=_value_`::
-Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
-
-`autoAddReplicas`::
-When set to `true`, enables automatic addition of replicas when the number of active replicas falls below the value set for `replicationFactor`. This may occur if a replica goes down, for example. The default is `false`, which means new replicas will not be added.
-+
-While this parameter is provided as part of Solr's set of features to provide autoscaling of clusters, it is available even when you have not implemented any other part of autoscaling (such as a policy). See the section <<solrcloud-autoscaling-auto-add-replicas.adoc#the-autoaddreplicas-parameter,SolrCloud Autoscaling Automatically Adding Replicas>> for more details about this option and how it can be used.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-`rule`::
-Replica placement rules. See the section <<rule-based-replica-placement.adoc#rule-based-replica-placement,Rule-based Replica Placement>> for details.
-
-`snitch`::
-Details of the snitch provider. See the section <<rule-based-replica-placement.adoc#rule-based-replica-placement,Rule-based Replica Placement>> for details.
-
-`policy`:: Name of the collection-level policy. See <<solrcloud-autoscaling-policy-preferences.adoc#collection-specific-policy, Defining Collection-Specific Policies >> for details.
-
-`waitForFinalState`::
-If `true`, the request will complete only when all affected replicas become active. The default is `false`, which means that the API will return the status of the single action, which may be before the new replica is online and active.
-
-`withCollection`::
-The name of the collection with which all replicas of this collection must be co-located. The collection must already exist and must have a single shard named `shard1`.
-See <<colocating-collections.adoc#colocating-collections, Colocating collections>> for more details.
-
-
-=== CREATE Response
-
-The response will include the status of the request and the new core names. If the status is anything other than "success", an error message will explain why the request failed.
-
-=== Examples using CREATE
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=CREATE&name=newCollection&numShards=2&replicationFactor=1&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">3764</int>
- </lst>
- <lst name="success">
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">3450</int>
- </lst>
- <str name="core">newCollection_shard1_replica1</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">3597</int>
- </lst>
- <str name="core">newCollection_shard2_replica1</str>
- </lst>
- </lst>
-</response>
-----
-
-[[modifycollection]]
-== MODIFYCOLLECTION: Modify Attributes of a Collection
-
-`/admin/collections?action=MODIFYCOLLECTION&collection=_<collection-name>_&__<attribute-name>__=__<attribute-value>__&__<another-attribute-name>__=__<another-value>__&__<yet_another_attribute_name>__=`
-
-It's possible to edit multiple attributes at a time. Changing these values only updates the z-node on ZooKeeper, they do not change the topology of the collection. For instance, increasing `replicationFactor` will _not_ automatically add more replicas to the collection but _will_ allow more ADDREPLICA commands to succeed.
-
-An attribute can be deleted by passing an empty value. For example, `yet_another_attribute_name=` (with no value) will delete the `yet_another_attribute_name` parameter from the collection.
-
-=== MODIFYCOLLECTION Parameters
-
-`collection`::
-The name of the collection to be modified. This parameter is required.
-
-`_attribute_=_value_`::
-Key-value pairs of attribute names and attribute values.
-
-At least one `_attribute_` parameter is required.
-
-The attributes that can be modified are:
-
-* maxShardsPerNode
-* replicationFactor
-* autoAddReplicas
-* collection.configName
-* rule
-* snitch
-* policy
-* withCollection
-
-See the <<create,CREATE action>> section above for details on these attributes.
-
-[[reload]]
-== RELOAD: Reload a Collection
-
-`/admin/collections?action=RELOAD&name=_name_`
-
-The RELOAD action is used when you have changed a configuration in ZooKeeper.
-
-=== RELOAD Parameters
-
-`name`::
-The name of the collection to reload. This parameter is required.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
+== Asynchronous Calls
-=== RELOAD Response
+Some collection API calls can be long running tasks (such as SPLITSHARD, and others). Instead of waiting for a command to exit, you can optionally have the calls run asynchronously. Specifying `async=<request-id>` enables you to make an asynchronous call, the status of which can be requested using the <<requeststatus,REQUESTSTATUS>> command at any time.
-The response will include the status of the request and the cores that were reloaded. If the status is anything other than "success", an error message will explain why the request failed.
+REQUESTSTATUS does not automatically clean up the tracking data structures, meaning the status of completed or failed tasks stays stored in ZooKeeper unless cleared manually. DELETESTATUS can be used to clear the stored statuses. There is a limit of 10,000 on the number of async call responses stored in a cluster, so cleanup must occur periodically.
-=== Examples using RELOAD
+=== Examples of Async Requests
*Input*
[source,text]
----
-http://localhost:8983/solr/admin/collections?action=RELOAD&name=newCollection&wt=xml
+http://localhost:8983/solr/admin/collections?action=SPLITSHARD&collection=collection1&shard=shard1&async=1000&wt=xml
----
*Output*
@@ -229,109 +54,31 @@ http://localhost:8983/solr/admin/collections?action=RELOAD&name=newCollection&wt
<response>
<lst name="responseHeader">
<int name="status">0</int>
- <int name="QTime">1551</int>
- </lst>
- <lst name="success">
- <lst name="10.0.1.6:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">761</int>
- </lst>
- </lst>
- <lst name="10.0.1.4:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1527</int>
- </lst>
- </lst>
+ <int name="QTime">99</int>
</lst>
+ <str name="requestid">1000</str>
</response>
----
-[[splitshard]]
-== SPLITSHARD: Split a Shard
-
-`/admin/collections?action=SPLITSHARD&collection=_name_&shard=_shardID_`
-
-Splitting a shard will take an existing shard and break it into two pieces which are written to disk as two (new) shards. The original shard will continue to contain the same data as-is but it will start re-routing requests to the new shards. The new shards will have as many replicas as the original shard. A soft commit is automatically issued after splitting a shard so that documents are made visible on sub-shards. An explicit commit (hard or soft) is not necessary after a split operati [...]
-
-This command allows for seamless splitting and requires no downtime. A shard being split will continue to accept query and indexing requests and will automatically start routing requests to the new shards once this operation is complete. This command can only be used for SolrCloud collections created with `numShards` parameter, meaning collections which rely on Solr's hash-based routing mechanism.
-
-The split is performed by dividing the original shard's hash range into two equal partitions and dividing up the documents in the original shard according to the new sub-ranges. Two parameters discussed below, `ranges` and `split.key` provide further control over how the split occurs.
-
-The newly created shards will have as many replicas as the parent shard, of the same replica types.
-
-When using `splitMethod=rewrite` (default) you must ensure that the node running the leader of the parent shard has enough free disk space i.e., more than twice the index size, for the split to succeed. The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the new replicas but only when an Autoscaling policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Pref [...]
-
-Also, the first replicas of resulting sub-shards will always be placed on the shard leader node, which may cause Autoscaling policy violations that need to be resolved either automatically (when appropriate triggers are in use) or manually.
-
-Shard splitting can be a long running process. In order to avoid timeouts, you should run this as an <<Asynchronous Calls,asynchronous call>>.
-
-=== SPLITSHARD Parameters
-
-`collection`::
-The name of the collection that includes the shard to be split. This parameter is required.
-
-`shard`::
-The name of the shard to be split. This parameter is required when `split.key` is not specified.
-
-`ranges`::
-A comma-separated list of hash ranges in hexadecimal, such as `ranges=0-1f4,1f5-3e8,3e9-5dc`.
-+
-This parameter can be used to divide the original shard's hash range into arbitrary hash range intervals specified in hexadecimal. For example, if the original hash range is `0-1500` then adding the parameter: `ranges=0-1f4,1f5-3e8,3e9-5dc` will divide the original shard into three shards with hash range `0-500`, `501-1000`, and `1001-1500` respectively.
-
-`split.key`::
-The key to use for splitting the index.
-+
-This parameter can be used to split a shard using a route key such that all documents of the specified route key end up in a single dedicated sub-shard. Providing the `shard` parameter is not required in this case because the route key is enough to figure out the right shard. A route key which spans more than one shard is not supported.
-+
-For example, suppose `split.key=A!` hashes to the range `12-15` and belongs to shard 'shard1' with range `0-20`. Splitting by this route key would yield three sub-shards with ranges `0-11`, `12-15` and `16-20`. Note that the sub-shard with the hash range of the route key may also contain documents for other route keys whose hash ranges overlap.
-
-`numSubShards`::
-The number of sub-shards to split the parent shard into. Allowed values for this are in the range of `2`-`8` and defaults to `2`.
-+
-This parameter can only be used when `ranges` or `split.key` are not specified.
-
-`splitMethod`::
-Currently two methods of shard splitting are supported:
-* `splitMethod=rewrite` (default) after selecting documents to retain in each partition this method creates sub-indexes from
-scratch, which is a lengthy CPU- and I/O-intensive process but results in optimally-sized sub-indexes that don't contain
-any data from documents not belonging to each partition.
-* `splitMethod=link` uses file system-level hard links for creating copies of the original index files and then only modifies the
-file that contains the list of deleted documents in each partition. This method is many times quicker and lighter on resources than the
-`rewrite` method but the resulting sub-indexes are still as large as the original index because they still contain data from documents not
-belonging to the partition. This slows down the replication process and consumes more disk space on replica nodes (the multiple hard-linked
-copies don't occupy additional disk space on the leader node, unless hard-linking is not supported).
-
-`splitFuzz`::
-A float value (default is 0.0f, must be smaller than 0.5f) that allows to vary the sub-shard ranges
-by this percentage of total shard range, odd shards being larger and even shards being smaller.
-
-`property._name_=_value_`::
-Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
-
-`waitForFinalState`::
-If `true`, the request will complete only when all affected replicas become active. The default is `false`, which means that the API will return the status of the single action, which may be before the new replica is online and active.
-
-`timing`::
-If `true` then each stage of processing will be timed and a `timing` section will be included in response.
+[[requeststatus]]
+== REQUESTSTATUS: Request Status of an Async Call
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>
+Request the status and response of an already submitted <<Asynchronous Calls,Asynchronous Collection API>> (below) call. This call is also used to clear up the stored statuses.
-=== SPLITSHARD Response
+`/admin/collections?action=REQUESTSTATUS&requestid=_request-id_`
-The output will include the status of the request and the new shard names, which will use the original shard as their basis, adding an underscore and a number. For example, "shard1" will become "shard1_0" and "shard1_1". If the status is anything other than "success", an error message will explain why the request failed.
+=== REQUESTSTATUS Parameters
-=== Examples using SPLITSHARD
+`requestid`::
+The user defined request ID for the request. This can be used to track the status of the submitted asynchronous task. This parameter is required.
-*Input*
+=== Examples using REQUESTSTATUS
-Split shard1 of the "anotherCollection" collection.
+*Input: Valid Request ID*
[source,text]
----
-http://localhost:8983/solr/admin/collections?action=SPLITSHARD&collection=anotherCollection&shard=shard1&wt=xml
+http://localhost:8983/solr/admin/collections?action=REQUESTSTATUS&requestid=1000&wt=xml
----
*Output*
@@ -341,172 +88,20 @@ http://localhost:8983/solr/admin/collections?action=SPLITSHARD&collection=anothe
<response>
<lst name="responseHeader">
<int name="status">0</int>
- <int name="QTime">6120</int>
- </lst>
- <lst name="success">
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">3673</int>
- </lst>
- <str name="core">anotherCollection_shard1_1_replica1</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">3681</int>
- </lst>
- <str name="core">anotherCollection_shard1_0_replica1</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">6008</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">6007</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">71</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">0</int>
- </lst>
- <str name="core">anotherCollection_shard1_1_replica1</str>
- <str name="status">EMPTY_BUFFER</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">0</int>
- </lst>
- <str name="core">anotherCollection_shard1_0_replica1</str>
- <str name="status">EMPTY_BUFFER</str>
- </lst>
+ <int name="QTime">1</int>
</lst>
-</response>
-----
-
-[[createshard]]
-== CREATESHARD: Create a Shard
-
-Shards can only created with this API for collections that use the 'implicit' router (i.e., when the collection was created, `router.name=implicit`). A new shard with a name can be created for an existing 'implicit' collection.
-
-Use SPLITSHARD for collections created with the 'compositeId' router (`router.key=compositeId`).
-
-`/admin/collections?action=CREATESHARD&shard=_shardName_&collection=_name_`
-
-The default values for `replicationFactor` or `nrtReplicas`, `tlogReplicas`, `pullReplicas` from the collection is used to determine the number of replicas to be created for the new shard. This can be customized by explicitly passing the corresponding parameters to the request.
-
-The API uses the Autoscaling framework to find the best possible nodes in the cluster when an Autoscaling preferences or policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Preferences>> section for more details.
-
-=== CREATESHARD Parameters
-
-`collection`::
-The name of the collection that includes the shard to be split. This parameter is required.
-
-`shard`::
-The name of the shard to be created. This parameter is required.
-
-`createNodeSet`::
-Allows defining the nodes to spread the new collection across. If not provided, the CREATESHARD operation will create shard-replica spread across all live Solr nodes.
-+
-The format is a comma-separated list of node_names, such as `localhost:8983_solr,localhost:8984_solr,localhost:8985_solr`.
-
-`nrtReplicas`::
-The number of `nrt` replicas that should be created for the new shard (optional, the defaults for the collection is used if omitted)
-
-`tlogReplicas`::
-The number of `tlog` replicas that should be created for the new shard (optional, the defaults for the collection is used if omitted)
-
-`pullReplicas`::
-The number of `pull` replicas that should be created for the new shard (optional, the defaults for the collection is used if omitted)
-
-`property._name_=_value_`::
-Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
-
-`waitForFinalState`::
-If `true`, the request will complete only when all affected replicas become active. The default is `false`, which means that the API will return the status of the single action, which may be before the new replica is online and active.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-=== CREATESHARD Response
-
-The output will include the status of the request. If the status is anything other than "success", an error message will explain why the request failed.
-
-=== Examples using CREATESHARD
-
-*Input*
-
-Create 'shard-z' for the "anImplicitCollection" collection.
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=CREATESHARD&collection=anImplicitCollection&shard=shard-z&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">558</int>
+ <lst name="status">
+ <str name="state">completed</str>
+ <str name="msg">found 1000 in completed tasks</str>
</lst>
</response>
----
-[[deleteshard]]
-== DELETESHARD: Delete a Shard
-
-Deleting a shard will unload all replicas of the shard, remove them from `clusterstate.json`, and (by default) delete the instanceDir and dataDir for each replica. It will only remove shards that are inactive, or which have no range given for custom sharding.
-
-`/admin/collections?action=DELETESHARD&shard=_shardID_&collection=_name_`
-
-=== DELETESHARD Parameters
-
-`collection`::
-The name of the collection that includes the shard to be deleted. This parameter is required.
-
-`shard`::
-The name of the shard to be deleted. This parameter is required.
-
-`deleteInstanceDir`::
-By default Solr will delete the entire instanceDir of each replica that is deleted. Set this to `false` to prevent the instance directory from being deleted.
-
-`deleteDataDir`::
-By default Solr will delete the dataDir of each replica that is deleted. Set this to `false` to prevent the data directory from being deleted.
-
-`deleteIndex`::
-By default Solr will delete the index of each replica that is deleted. Set this to `false` to prevent the index directory from being deleted.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-=== DELETESHARD Response
-
-The output will include the status of the request. If the status is anything other than "success", an error message will explain why the request failed.
-
-=== Examples using DELETESHARD
-
-*Input*
-
-Delete 'shard1' of the "anotherCollection" collection.
+*Input: Invalid Request ID*
[source,text]
----
-http://localhost:8983/solr/admin/collections?action=DELETESHARD&collection=anotherCollection&shard=shard1&wt=xml
+http://localhost:8983/solr/admin/collections?action=REQUESTSTATUS&requestid=1004&wt=xml
----
*Output*
@@ -516,188 +111,37 @@ http://localhost:8983/solr/admin/collections?action=DELETESHARD&collection=anoth
<response>
<lst name="responseHeader">
<int name="status">0</int>
- <int name="QTime">558</int>
+ <int name="QTime">1</int>
</lst>
- <lst name="success">
- <lst name="10.0.1.4:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">27</int>
- </lst>
- </lst>
+ <lst name="status">
+ <str name="state">notfound</str>
+ <str name="msg">Did not find taskid [1004] in any tasks queue</str>
</lst>
</response>
----
-[[createalias]]
-== CREATEALIAS: Create or Modify an Alias for a Collection
-
-The `CREATEALIAS` action will create a new alias pointing to one or more collections.
-Aliases come in 2 flavors: standard and routed.
-
-*Standard aliases* are simple: CREATEALIAS registers the alias name with the names of one or more collections provided
- by the command.
-If an existing alias exists, it is replaced/updated.
-A standard alias can serve to have the appearance of renaming a collection, and can be used to atomically swap
-which backing/underlying collection is "live" for various purposes.
-When Solr searches an alias pointing to multiple collections, Solr will search all shards of all the collections as an
- aggregated whole.
-While it is possible to send updates to an alias spanning multiple collections, standard aliases have no logic for
- distributing documents among the referenced collections so all updates will go to the first collection in the list.
-
-`/admin/collections?action=CREATEALIAS&name=_name_&collections=_collectionlist_`
-
-*Routed aliases* are aliases with additional capabilities to act as a kind of super-collection -- routing
- updates to the correct collection.
-Since the only routing strategy at present is time oriented, these are also called *Time Routed Aliases* (TRAs).
-A TRA manages an alias and a time sequential series of collections that it will both create and optionally delete on-demand.
-See <<time-routed-aliases.adoc#time-routed-aliases,Time Routed Aliases>> for some important high-level information
- before getting started.
-
-NOTE: Presently this is only supported for temporal fields stored as a
-<<field-types-included-with-solr.adoc#field-types-included-with-solr,DatePointField or TrieDateField>> type. Other
-well ordered field types may be added in future versions.
-
-[source,text]
-----
-localhost:8983/solr/admin/collections?action=CREATEALIAS&name=timedata&router.start=NOW/DAY&router.field=evt_dt&router.name=time&router.interval=%2B1DAY&router.maxFutureMs=3600000&create-collection.collection.configName=myConfig&create-collection.numShards=2
-----
-
-If run on Jan 15, 2018, the above will create an alias named timedata, that contains collections with names prefixed
-with `timedata` and an initial collection named `timedata_2018_01_15` will be created immediately. Updates sent to this
-alias with a (required) value in `evt_dt` that is before or after 2018-01-15 will be rejected, until the last 60
-minutes of 2018-01-15. After 2018-01-15T23:00:00 documents for either 2018-01-15 or 2018-01-16 will be accepted.
-As soon as the system receives a document for an allowable time window for which there is no collection it will
-automatically create the next required collection (and potentially any intervening collections if `router.interval` is
-smaller than `router.maxFutureMs`). Both the initial collection and any subsequent collections will be created using
-the specified configset. All collection creation parameters other than `name` are allowed, prefixed
-by `create-collection.`
-
-This means that one could, for example, partition their collections by day, and within each daily collection route
-the data to shards based on customer id. Such shards can be of any type (NRT, PULL or TLOG), and rule-based replica
-placement strategies may also be used.
-
-The values supplied in this command for collection creation will be retained
-in alias properties, and can be verified by inspecting `aliases.json` in ZooKeeper.
-
-NOTE: Presently only updates are routed and queries are distributed to all collections in the alias, but future
-features may enable routing of the query to the single appropriate collection based on a special parameter or perhaps
-a filter on the routed field.
-
-=== CREATEALIAS Parameters
-
-`name`::
-The alias name to be created. This parameter is required. If the alias is to be routed it also functions
-as a prefix for the names of the dependent collections that will be created. It must therefore adhere to normal
-requirements for collection naming.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-==== Standard Alias Parameters
-
-`collections`::
-A comma-separated list of collections to be aliased. The collections must already exist in the cluster.
-This parameter signals the creation of a standard alias. If it is present all routing parameters are
-prohibited. If routing parameters are present this parameter is prohibited.
-
-==== Routed Alias Parameters
-
-Most routed alias parameters become _alias properties_ that can subsequently be inspected and <<aliasprop,modified>>.
-
-`router.start`::
-The start date/time of data for this time routed alias in Solr's standard date/time format (i.e., ISO-8601 or "NOW"
-optionally with <<working-with-dates.adoc#date-math,date math>>).
-+
-The first collection created for the alias will be internally named after this value.
-If a document is submitted with an earlier value for router.field then the earliest collection the alias points to then
-it will yield an error since it can't be routed. This date/time MUST NOT have a milliseconds component other than 0.
-Particularly, this means `NOW` will fail 999 times out of 1000, though `NOW/SECOND`, `NOW/MINUTE`, etc. will work
-just fine. This parameter is required.
-
-`TZ`::
-The timezone to be used when evaluating any date math in router.start or router.interval. This is equivalent to the
-same parameter supplied to search queries, but understand in this case it's persisted with most of the other parameters
-as an alias property.
-+
-If GMT-4 is supplied for this value then a document dated 2018-01-14T21:00:00:01.2345Z would be stored in the
-myAlias_2018-01-15_01 collection (assuming an interval of +1HOUR).
-+
-The default timezone is UTC.
-
-`router.field`::
-The date field to inspect to determine which underlying collection an incoming document should be routed to.
-This field is required on all incoming documents.
-
-`router.name`::
-The type of routing to use. Presently only `time` is valid. This parameter is required.
-
-`router.interval`::
-A date math expression that will be appended to a timestamp to determine the next collection in the series.
-Any date math expression that can be evaluated if appended to a timestamp of the form 2018-01-15T16:17:18 will
-work here.
-+
-This parameter is required.
-
-`router.maxFutureMs`::
-The maximum milliseconds into the future that a document is allowed to have in `router.field` for it to be accepted
-without error. If there was no limit, than an erroneous value could trigger many collections to be created.
-+
-The default is 10 minutes.
-
-`router.preemptiveCreateMath`::
-A date math expression that results in early creation of new collections.
-+
-If a document arrives with a timestamp that is after the end time of the most recent collection minus this
-interval, then the next (and only the next) collection will be created asynchronously. Without this setting, collections are created
-synchronously when required by the document time stamp and thus block the flow of documents until the collection
-is created (possibly several seconds). Preemptive creation reduces these hiccups. If set to enough time (perhaps
-an hour or more) then if there are problems creating a collection, this window of time might be enough to take
-corrective action. However after a successful preemptive creation, the collection is consuming resources without
-being used, and new documents will tend to be routed through it only to be routed elsewhere. Also, note that
-router.autoDeleteAge is currently evaluated relative to the date of a newly created collection, and so you may
-want to increase the delete age by the preemptive window amount so that the oldest collection isn't deleted too
-soon. Note that it has to be possible to subtract the interval specified from a date, so if prepending a
-minus sign creates invalid date math, this will cause an error. Also note that a document that is itself
-destined for a collection that does not exist will still trigger synchronous creation up to that destination collection
-but will not trigger additional async preemptive creation. Only one type of collection creation can happen
-per document.
-Example: `90MINUTES`.
-+
-This property is blank by default indicating just-in-time, synchronous creation of new collections.
+[[deletestatus]]
+== DELETESTATUS: Delete Status
-`router.autoDeleteAge`::
-A date math expression that results in the oldest collections getting deleted automatically.
-+
-The date math is relative to the timestamp of a newly created collection (typically close to the current time),
-and thus this must produce an earlier time via rounding and/or subtracting.
-Collections to be deleted must have a time range that is entirely before the computed age.
-Collections are considered for deletion immediately prior to new collections getting created.
-Example: `/DAY-90DAYS`.
-+
-The default is not to delete.
+Deletes the stored response of an already failed or completed <<Asynchronous Calls,Asynchronous Collection API>> call.
-`create-collection.*`::
-The * wildcard can be replaced with any parameter from the <<create,CREATE>> command except `name`. All other fields
-are identical in requirements and naming except that we insist that the configset be explicitly specified.
-The configset must be created beforehand, either uploaded or copied and modified.
-It's probably a bad idea to use "data driven" mode as schema mutations might happen concurrently leading to errors.
+`/admin/collections?action=DELETESTATUS&requestid=_request-id_`
-=== CREATEALIAS Response
+=== DELETESTATUS Parameters
-The output will simply be a responseHeader with details of the time it took to process the request.
-To confirm the creation of the alias, you can look in the Solr Admin UI, under the Cloud section and find the
-`aliases.json` file. The initial collection for routed aliases should also be visible in various parts of the admin UI.
+`requestid`::
+The request ID of the asynchronous call whose stored response should be cleared.
-=== Examples using CREATEALIAS
+`flush`::
+Set to `true` to clear all stored completed and failed async request responses.
-*Input*
+=== Examples using DELETESTATUS
-Create an alias named "testalias" and link it to the collections named "anotherCollection" and "testCollection".
+*Input: Valid Request ID*
[source,text]
----
-http://localhost:8983/solr/admin/collections?action=CREATEALIAS&name=testalias&collections=anotherCollection,testCollection&wt=xml
+http://localhost:8983/solr/admin/collections?action=DELETESTATUS&requestid=foo&wt=xml
----
*Output*
@@ -707,20 +151,17 @@ http://localhost:8983/solr/admin/collections?action=CREATEALIAS&name=testalias&c
<response>
<lst name="responseHeader">
<int name="status">0</int>
- <int name="QTime">122</int>
+ <int name="QTime">1</int>
</lst>
+ <str name="status">successfully removed stored response for [foo]</str>
</response>
----
-*Input*
-
-Create an alias named "myTimeData" for data beginning on `2018-01-15` in the UTC time zone and partitioning daily
-based on the `evt_dt` field in the incoming documents. Data more than one hour beyond the latest (most recent)
-partition is to be rejected and collections are created using a configset named "myConfig".
+*Input: Invalid Request ID*
[source,text]
----
-http://localhost:8983/solr/admin/collections?action=CREATEALIAS&name=myTimeData&router.start=NOW/DAY&router.field=evt_dt&router.name=time&router.interval=%2B1DAY&router.maxFutureMs=3600000&create-collection.collection.configName=myConfig&create-collection.numShards=2
+http://localhost:8983/solr/admin/collections?action=DELETESTATUS&requestid=bar&wt=xml
----
*Output*
@@ -730,138 +171,17 @@ http://localhost:8983/solr/admin/collections?action=CREATEALIAS&name=myTimeData&
<response>
<lst name="responseHeader">
<int name="status">0</int>
- <int name="QTime">1234</int>
+ <int name="QTime">1</int>
</lst>
+ <str name="status">[bar] not found in stored responses</str>
</response>
----
-
-*Input*
-
-A somewhat contrived example demonstrating the <<v2-api.adoc#top-v2-api,V2 API>> usage and additional collection creation options.
-Notice that the collection creation parameters follow the v2 API naming convention, not the v1 naming conventions.
-
-[source,json]
-----
-POST /api/c
-{
- "create-routed-alias" : {
- "name": "somethingTemporalThisWayComes",
- "router" : {
- "name": "time",
- "field": "evt_dt",
- "start":"NOW/MINUTE",
- "interval":"+2HOUR",
- "maxFutureMs":"14400000"
- },
- "create-collection" : {
- "config":"_default",
- "router": {
- "name":"implicit",
- "field":"foo_s"
- },
- "shards":"foo,bar,baz",
- "numShards": 3,
- "tlogReplicas":1,
- "pullReplicas":1,
- "maxShardsPerNode":2,
- "properties" : {
- "foobar":"bazbam"
- }
- }
- }
-}
-----
-
-*Output*
-
-[source,xml]
-----
-{
- "responseHeader": {
- "status": 0,
- "QTime": 1234
- }
-}
-----
-
-[[listaliases]]
-== LISTALIASES: List of all aliases in the cluster
-
-`/admin/collections?action=LISTALIASES`
-
-The LISTALIASES action does not take any parameters.
-
-=== LISTALIASES Response
-
-The output will contain a list of aliases with the corresponding collection names.
-
-=== Examples using LISTALIASES
-
-*Input*
-
-List the existing aliases, requesting information as XML from Solr:
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=LISTALIASES&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">0</int>
- </lst>
- <lst name="aliases">
- <str name="testalias1">collection1</str>
- <str name="testalias2">collection1,collection2</str>
- </lst>
- <lst name="properties">
- <lst name="testalias1"/>
- <lst name="testalias2">
- <str name="someKey">someValue</str>
- </lst>
- </lst>
-</response>
-----
-
-[[aliasprop]]
-== ALIASPROP: Modify Alias Properties for a Collection
-
-The `ALIASPROP` action modifies the properties (metadata) on an alias. If a key is set with a value that is empty it will be removed.
-
-`/admin/collections?action=ALIASPROP&name=_name_&property.someKey=somevalue`
-
-=== ALIASPROP Parameters
-
-`name`::
-The alias name on which to set properties. This parameter is required.
-
-`property.*`::
-The name of the property to be modified replaces '*', the value for the parameter is passed as the value for the property.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-=== ALIASPROP Response
-
-The output will simply be a responseHeader with details of the time it took to process the request.
-To confirm the creation of the property or properties, you can look in the Solr Admin UI, under the Cloud section and
-find the `aliases.json` file or use the LISTALIASES api command.
-
-=== Examples using ALIASPROP
-
-*Input*
-
-For an alias named "testalias2" and set the value "someValue" for a property of "someKey" and "otherValue" for "otherKey".
+*Input: Clear All Stored Statuses*
[source,text]
----
-http://localhost:8983/solr/admin/collections?action=ALIASPROP&name=testalias2&property.someKey=someValue&property.otherKey=otherValue&wt=xml
+http://localhost:8983/solr/admin/collections?action=DELETESTATUS&flush=true&wt=xml
----
*Output*
@@ -871,1562 +191,8 @@ http://localhost:8983/solr/admin/collections?action=ALIASPROP&name=testalias2&pr
<response>
<lst name="responseHeader">
<int name="status">0</int>
- <int name="QTime">122</int>
+ <int name="QTime">1</int>
</lst>
-</response>
-----
-
-[[deletealias]]
-== DELETEALIAS: Delete a Collection Alias
-
-`/admin/collections?action=DELETEALIAS&name=_name_`
-
-=== DELETEALIAS Parameters
-
-`name`::
-The name of the alias to delete. This parameter is required.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-=== DELETEALIAS Response
-
-The output will simply be a responseHeader with details of the time it took to process the request.
-To confirm the removal of the alias, you can look in the Solr Admin UI, under the Cloud section, and
-find the `aliases.json` file.
-
-=== Examples using DELETEALIAS
-
-*Input*
-
-Remove the alias named "testalias".
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=DELETEALIAS&name=testalias&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">117</int>
- </lst>
-</response>
-----
-
-[[delete]]
-== DELETE: Delete a Collection
-
-`/admin/collections?action=DELETE&name=_collection_`
-
-=== DELETE Parameters
-
-`name`::
-The name of the collection to delete. This parameter is required.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-=== DELETE Response
-
-The response will include the status of the request and the cores that were deleted. If the status is anything other than "success", an error message will explain why the request failed.
-
-=== Examples using DELETE
-
-*Input*
-
-Delete the collection named "newCollection".
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=DELETE&name=newCollection&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">603</int>
- </lst>
- <lst name="success">
- <lst name="10.0.1.6:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">19</int>
- </lst>
- </lst>
- <lst name="10.0.1.4:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">67</int>
- </lst>
- </lst>
- </lst>
-</response>
-----
-
-[[deletereplica]]
-== DELETEREPLICA: Delete a Replica
-
-Deletes a named replica from the specified collection and shard.
-
-If the corresponding core is up and running the core is unloaded, the entry is removed from the clusterstate, and (by default) delete the instanceDir and dataDir. If the node/core is down, the entry is taken off the clusterstate and if the core comes up later it is automatically unregistered.
-
-`/admin/collections?action=DELETEREPLICA&collection=_collection_&shard=_shard_&replica=_replica_`
-
-=== DELETEREPLICA Parameters
-
-`collection`::
-The name of the collection. This parameter is required.
-
-`shard`::
-The name of the shard that includes the replica to be removed. This parameter is required.
-
-`replica`::
-The name of the replica to remove.
-+
-If `count` is used instead, this parameter is not required. Otherwise, this parameter must be supplied.
-
-`count`::
-The number of replicas to remove. If the requested number exceeds the number of replicas, no replicas will be deleted. If there is only one replica, it will not be removed.
-+
-If `replica` is used instead, this parameter is not required. Otherwise, this parameter must be supplied.
-
-`deleteInstanceDir`::
-By default Solr will delete the entire instanceDir of the replica that is deleted. Set this to `false` to prevent the instance directory from being deleted.
-
-`deleteDataDir`::
-By default Solr will delete the dataDir of the replica that is deleted. Set this to `false` to prevent the data directory from being deleted.
-
-`deleteIndex`::
-By default Solr will delete the index of the replica that is deleted. Set this to `false` to prevent the index directory from being deleted.
-
-`onlyIfDown`::
-When set to `true`, no action will be taken if the replica is active. Default `false`.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-=== Examples using DELETEREPLICA
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=DELETEREPLICA&collection=test2&shard=shard2&replica=core_node3&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">110</int>
- </lst>
-</response>
-----
-
-[[addreplica]]
-== ADDREPLICA: Add Replica
-
-Add one or more replicas to a shard in a collection. The node name can be specified if the replica is to be created in a specific node. Otherwise, a set of nodes can be specified and the most suitable ones among them will be chosen to create the replica(s).
-
-The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the new replica(s) but only when an Autoscaling preferences or policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Preferences>> section for more details.
-
-`/admin/collections?action=ADDREPLICA&collection=_collection_&shard=_shard_&node=_nodeName_`
-
-=== ADDREPLICA Parameters
-
-`collection`::
-The name of the collection where the replica should be created. This parameter is required.
-
-`shard`::
-The name of the shard to which replica is to be added.
-+
-If `shard` is not specified, then `\_route_` must be.
-
-`\_route_`::
-If the exact shard name is not known, users may pass the `\_route_` value and the system would identify the name of the shard.
-+
-Ignored if the `shard` parameter is also specified.
-
-`node`::
-The name of the node where the replica should be created (optional).
-
-`createNodeSet`::
-A comma-separated list of nodes among which the best ones will be chosen to place the replicas (optional)
-+
-The format is a comma-separated list of node_names, such as `localhost:8983_solr,localhost:8984_solr,localhost:8985_solr`.
-
-NOTE: If neither `node` nor `createNodeSet` are specified then the best node(s) from among all the live nodes in the cluster are chosen.
-
-`instanceDir`::
-The instanceDir for the core that will be created.
-
-`dataDir`::
-The directory in which the core should be created.
-
-`type`::
-The type of replica to create. These possible values are allowed:
-+
-* `nrt`: The NRT type maintains a transaction log and updates its index locally. This is the default and the most commonly used.
-* `tlog`: The TLOG type maintains a transaction log but only updates its index via replication.
-* `pull`: The PULL type does not maintain a transaction log and only updates its index via replication. This type is not eligible to become a leader.
-+
-See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica type options.
-
-`nrtReplicas`::
-The number of `nrt` replicas that should be created (optional, defaults to 1 if `type` is `nrt` otherwise 0).
-
-`tlogReplicas`::
-The number of `tlog` replicas that should be created (optional, defaults to 1 if `type` is `tlog` otherwise 0).
-
-`pullReplicas`::
-The number of `pull` replicas that should be created (optional, defaults to 1 if `type` is `pull` otherwise 0).
-
-`property._name_=_value_`::
-Set core property _name_ to _value_. See <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details about supported properties and values.
-
-`waitForFinalState`::
-If `true`, the request will complete only when all affected replicas become active. The default is `false`, which means that the API will return the status of the single action, which may be before the new replica is online and active.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>
-
-=== Examples using ADDREPLICA
-
-*Input*
-
-Create a replica for the "test" collection on the node "192.167.1.2:8983_solr".
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=ADDREPLICA&collection=test2&shard=shard2&node=192.167.1.2:8983_solr&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">3764</int>
- </lst>
- <lst name="success">
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">3450</int>
- </lst>
- <str name="core">test2_shard2_replica4</str>
- </lst>
- </lst>
-</response>
-----
-
-*Input*
-
-Create a replica for the "gettingstarted" collection with one PULL replica and one TLOG replica.
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=addreplica&collection=gettingstarted&shard=shard1&tlogReplicas=1&pullReplicas=1
-----
-
-*Output*
-
-[source,json]
-----
-{
- "responseHeader": {
- "status": 0,
- "QTime": 784
- },
- "success": {
- "127.0.1.1:7574_solr": {
- "responseHeader": {
- "status": 0,
- "QTime": 257
- },
- "core": "gettingstarted_shard1_replica_p11"
- },
- "127.0.1.1:8983_solr": {
- "responseHeader": {
- "status": 0,
- "QTime": 295
- },
- "core": "gettingstarted_shard1_replica_t10"
- }
- }
-}
-----
-
-[[clusterprop]]
-== CLUSTERPROP: Cluster Properties
-
-Add, edit or delete a cluster-wide property.
-
-`/admin/collections?action=CLUSTERPROP&name=_propertyName_&val=_propertyValue_`
-
-=== CLUSTERPROP Parameters
-
-`name`::
-The name of the property. Supported properties names are `autoAddReplicas`, `legacyCloud` , `location`, `maxCoresPerNode` and `urlScheme`. Other properties can be set
-(for example, if you need them for custom plugins) but they must begin with the prefix `ext.`. Unknown properties that don't begin with `ext.` will be rejected.
-
-`val`::
-The value of the property. If the value is empty or null, the property is unset.
-
-=== CLUSTERPROP Response
-
-The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.
-
-=== Examples using CLUSTERPROP
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=CLUSTERPROP&name=urlScheme&val=https&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">0</int>
- </lst>
-</response>
-----
-
-=== Setting Cluster-Wide Defaults
-
-It is possible to set cluster-wide default values for certain attributes of a collection, using the `defaults` parameter.
-
-*Set/update default values*
-[source]
-----
-curl -X POST -H 'Content-type:application/json' --data-binary '
-{
- "set-obj-property": {
- "defaults" : {
- "collection": {
- "numShards": 2,
- "nrtReplicas": 1,
- "tlogReplicas": 1,
- "pullReplicas": 1
- }
- }
- }
-}' http://localhost:8983/api/cluster
-----
-
-*Unset the only value of `nrtReplicas`*
-[source]
-----
-curl -X POST -H 'Content-type:application/json' --data-binary '
-{
- "set-obj-property": {
- "defaults" : {
- "collection": {
- "nrtReplicas": null
- }
- }
- }
-}' http://localhost:8983/api/cluster
-----
-
-*Unset all values in `defaults`*
-[source]
-----
-curl -X POST -H 'Content-type:application/json' --data-binary '
-{ "set-obj-property" : {
- "defaults" : null
-}' http://localhost:8983/api/cluster
-----
-
-NOTE: Until Solr 7.5, cluster properties supported a `collectionDefaults` key which is now deprecated and
-replaced with `defaults`. Using the `collectionDefaults` parameter in Solr 7.4 or 7.5 will continue to work
- but the format of the properties will automatically be converted to the new nested structure.
-Support for the "collectionDefaults" key will be removed in Solr 9.
-
-[[collectionprop]]
-== COLLECTIONPROP: Collection Properties
-
-Add, edit or delete a collection property.
-
-`/admin/collections?action=COLLECTIONPROP&name=_collectionName_&propertyName=_propertyName_&propertyValue=_propertyValue_`
-
-=== COLLECTIONPROP Parameters
-
-`name`::
-The name of the collection for which the property would be set.
-
-`propertyName`::
-The name of the property.
-
-`propertyValue`::
-The value of the property. When not provided, the property is deleted.
-
-=== COLLECTIONPROP Response
-
-The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.
-
-=== Examples using COLLECTIONPROP
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=COLLECTIONPROP&name=coll&propertyName=foo&propertyValue=bar&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">0</int>
- </lst>
-</response>
-----
-
-[[migrate]]
-== MIGRATE: Migrate Documents to Another Collection
-
-`/admin/collections?action=MIGRATE&collection=_name_&split.key=_key1!_&target.collection=_target_collection_&forward.timeout=60`
-
-The MIGRATE command is used to migrate all documents having a given routing key to another collection. The source collection will continue to have the same data as-is but it will start re-routing write requests to the target collection for the number of seconds specified by the `forward.timeout` parameter. It is the responsibility of the user to switch to the target collection for reads and writes after the MIGRATE action completes.
-
-The routing key specified by the `split.key` parameter may span multiple shards on both the source and the target collections. The migration is performed shard-by-shard in a single thread. One or more temporary collections may be created by this command during the ‘migrate’ process but they are cleaned up at the end automatically.
-
-This is a long running operation and therefore using the `async` parameter is highly recommended. If the `async` parameter is not specified then the operation is synchronous by default and keeping a large read timeout on the invocation is advised. Even with a large read timeout, the request may still timeout but that doesn’t necessarily mean that the operation has failed. Users should check logs, cluster state, source and target collections before invoking the operation again.
-
-This command works only with collections using the compositeId router. The target collection must not receive any writes during the time the MIGRATE command is running otherwise some writes may be lost.
-
-Please note that the MIGRATE API does not perform any de-duplication on the documents so if the target collection contains documents with the same uniqueKey as the documents being migrated then the target collection will end up with duplicate documents.
-
-=== MIGRATE Parameters
-
-`collection`::
-The name of the source collection from which documents will be split. This parameter is required.
-
-`target.collection`::
-The name of the target collection to which documents will be migrated. This parameter is required.
-
-`split.key`::
-The routing key prefix. For example, if the uniqueKey of a document is "a!123", then you would use `split.key=a!`. This parameter is required.
-
-`forward.timeout`::
-The timeout, in seconds, until which write requests made to the source collection for the given `split.key` will be forwarded to the target shard. The default is 60 seconds.
-
-`property._name_=_value_`::
-Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-=== MIGRATE Response
-
-The response will include the status of the request.
-
-=== Examples using MIGRATE
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=MIGRATE&collection=test1&split.key=a!&target.collection=test2&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">19014</int>
- </lst>
- <lst name="success">
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <str name="core">test2_shard1_0_replica1</str>
- <str name="status">BUFFERING</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">2479</int>
- </lst>
- <str name="core">split_shard1_0_temp_shard1_0_shard1_replica1</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1002</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">21</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1655</int>
- </lst>
- <str name="core">split_shard1_0_temp_shard1_0_shard1_replica2</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">4006</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">17</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <str name="core">test2_shard1_0_replica1</str>
- <str name="status">EMPTY_BUFFER</str>
- </lst>
- <lst name="192.168.43.52:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">31</int>
- </lst>
- </lst>
- <lst name="192.168.43.52:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">31</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <str name="core">test2_shard1_1_replica1</str>
- <str name="status">BUFFERING</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1742</int>
- </lst>
- <str name="core">split_shard1_1_temp_shard1_1_shard1_replica1</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1002</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">15</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1917</int>
- </lst>
- <str name="core">split_shard1_1_temp_shard1_1_shard1_replica2</str>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">5007</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">8</int>
- </lst>
- </lst>
- <lst>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <str name="core">test2_shard1_1_replica1</str>
- <str name="status">EMPTY_BUFFER</str>
- </lst>
- <lst name="192.168.43.52:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">30</int>
- </lst>
- </lst>
- <lst name="192.168.43.52:8983_solr">
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">30</int>
- </lst>
- </lst>
- </lst>
-</response>
-----
-
-[[addrole]]
-== ADDROLE: Add a Role
-
-`/admin/collections?action=ADDROLE&role=_roleName_&node=_nodeName_`
-
-Assigns a role to a given node in the cluster. The only supported role is `overseer`.
-
-Use this command to dedicate a particular node as Overseer. Invoke it multiple times to add more nodes. This is useful in large clusters where an Overseer is likely to get overloaded. If available, one among the list of nodes which are assigned the 'overseer' role would become the overseer. The system would assign the role to any other node if none of the designated nodes are up and running.
-
-=== ADDROLE Parameters
-
-`role`::
-The name of the role. The only supported role as of now is `overseer`. This parameter is required.
-
-`node`::
-The name of the node that will be assigned the role. It is possible to assign a role even before that node is started. This parameter is started.
-
-=== ADDROLE Response
-
-The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.
-
-=== Examples using ADDROLE
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=ADDROLE&role=overseer&node=192.167.1.2:8983_solr&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">0</int>
- </lst>
-</response>
-----
-
-[[removerole]]
-== REMOVEROLE: Remove Role
-
-Remove an assigned role. This API is used to undo the roles assigned using ADDROLE operation
-
-`/admin/collections?action=REMOVEROLE&role=_roleName_&node=_nodeName_`
-
-=== REMOVEROLE Parameters
-
-`role`::
-The name of the role. The only supported role as of now is `overseer`. This parameter is required.
-
-`node`::
-The name of the node where the role should be removed.
-
-
-=== REMOVEROLE Response
-
-The response will include the status of the request and the properties that were updated or removed. If the status is anything other than "0", an error message will explain why the request failed.
-
-=== Examples using REMOVEROLE
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=REMOVEROLE&role=overseer&node=192.167.1.2:8983_solr&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">0</int>
- </lst>
-</response>
-----
-
-[[overseerstatus]]
-== OVERSEERSTATUS: Overseer Status and Statistics
-
-Returns the current status of the overseer, performance statistics of various overseer APIs, and the last 10 failures per operation type.
-
-`/admin/collections?action=OVERSEERSTATUS`
-
-=== Examples using OVERSEERSTATUS
-
-*Input:*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=OVERSEERSTATUS
-----
-
-[source,json]
-----
-{
- "responseHeader":{
- "status":0,
- "QTime":33},
- "leader":"127.0.1.1:8983_solr",
- "overseer_queue_size":0,
- "overseer_work_queue_size":0,
- "overseer_collection_queue_size":2,
- "overseer_operations":[
- "createcollection",{
- "requests":2,
- "errors":0,
- "avgRequestsPerSecond":0.7467088842794136,
- "5minRateRequestsPerSecond":7.525069023276674,
- "15minRateRequestsPerSecond":10.271274280947182,
- "avgTimePerRequest":0.5050685,
- "medianRequestTime":0.5050685,
- "75thPcRequestTime":0.519016,
- "95thPcRequestTime":0.519016,
- "99thPcRequestTime":0.519016,
- "999thPcRequestTime":0.519016},
- "removeshard",{
- "..."
- }],
- "collection_operations":[
- "splitshard",{
- "requests":1,
- "errors":1,
- "recent_failures":[{
- "request":{
- "operation":"splitshard",
- "shard":"shard2",
- "collection":"example1"},
- "response":[
- "Operation splitshard caused exception:","org.apache.solr.common.SolrException:org.apache.solr.common.SolrException: No shard with the specified name exists: shard2",
- "exception",{
- "msg":"No shard with the specified name exists: shard2",
- "rspCode":400}]}],
- "avgRequestsPerSecond":0.8198143044809885,
- "5minRateRequestsPerSecond":8.043840552427673,
- "15minRateRequestsPerSecond":10.502079828515368,
- "avgTimePerRequest":2952.7164175,
- "medianRequestTime":2952.7164175000003,
- "75thPcRequestTime":5904.384052,
- "95thPcRequestTime":5904.384052,
- "99thPcRequestTime":5904.384052,
- "999thPcRequestTime":5904.384052},
- "..."
- ],
- "overseer_queue":[
- "..."
- ],
- "..."
- }
-----
-
-[[clusterstatus]]
-== CLUSTERSTATUS: Cluster Status
-
-Fetch the cluster status including collections, shards, replicas, configuration name as well as collection aliases and cluster properties.
-
-`/admin/collections?action=CLUSTERSTATUS`
-
-=== CLUSTERSTATUS Parameters
-
-`collection`::
-The collection or alias name for which information is requested. If omitted, information on all collections in the cluster will be returned. If an alias is supplied, information on the collections in the alias will be returned.
-
-`shard`::
-The shard(s) for which information is requested. Multiple shard names can be specified as a comma-separated list.
-
-`\_route_`::
-This can be used if you need the details of the shard where a particular document belongs to and you don't know which shard it falls under.
-
-=== CLUSTERSTATUS Response
-
-The response will include the status of the request and the status of the cluster.
-
-=== Examples using CLUSTERSTATUS
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=CLUSTERSTATUS
-----
-
-*Output*
-
-[source,json]
-----
-{
- "responseHeader":{
- "status":0,
- "QTime":333},
- "cluster":{
- "collections":{
- "collection1":{
- "shards":{
- "shard1":{
- "range":"80000000-ffffffff",
- "state":"active",
- "replicas":{
- "core_node1":{
- "state":"active",
- "core":"collection1",
- "node_name":"127.0.1.1:8983_solr",
- "base_url":"http://127.0.1.1:8983/solr",
- "leader":"true"},
- "core_node3":{
- "state":"active",
- "core":"collection1",
- "node_name":"127.0.1.1:8900_solr",
- "base_url":"http://127.0.1.1:8900/solr"}}},
- "shard2":{
- "range":"0-7fffffff",
- "state":"active",
- "replicas":{
- "core_node2":{
- "state":"active",
- "core":"collection1",
- "node_name":"127.0.1.1:7574_solr",
- "base_url":"http://127.0.1.1:7574/solr",
- "leader":"true"},
- "core_node4":{
- "state":"active",
- "core":"collection1",
- "node_name":"127.0.1.1:7500_solr",
- "base_url":"http://127.0.1.1:7500/solr"}}}},
- "maxShardsPerNode":"1",
- "router":{"name":"compositeId"},
- "replicationFactor":"1",
- "znodeVersion": 11,
- "autoCreated":"true",
- "configName" : "my_config",
- "aliases":["both_collections"]
- },
- "collection2":{
- "..."
- }
- },
- "aliases":{ "both_collections":"collection1,collection2" },
- "roles":{
- "overseer":[
- "127.0.1.1:8983_solr",
- "127.0.1.1:7574_solr"]
- },
- "live_nodes":[
- "127.0.1.1:7574_solr",
- "127.0.1.1:7500_solr",
- "127.0.1.1:8983_solr",
- "127.0.1.1:8900_solr"]
- }
-}
-----
-
-[[requeststatus]]
-== REQUESTSTATUS: Request Status of an Async Call
-
-Request the status and response of an already submitted <<Asynchronous Calls,Asynchronous Collection API>> (below) call. This call is also used to clear up the stored statuses.
-
-`/admin/collections?action=REQUESTSTATUS&requestid=_request-id_`
-
-=== REQUESTSTATUS Parameters
-
-`requestid`::
-The user defined request ID for the request. This can be used to track the status of the submitted asynchronous task. This parameter is required.
-
-=== Examples using REQUESTSTATUS
-
-*Input: Valid Request ID*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=REQUESTSTATUS&requestid=1000&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <lst name="status">
- <str name="state">completed</str>
- <str name="msg">found 1000 in completed tasks</str>
- </lst>
-</response>
-----
-
-*Input: Invalid Request ID*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=REQUESTSTATUS&requestid=1004&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <lst name="status">
- <str name="state">notfound</str>
- <str name="msg">Did not find taskid [1004] in any tasks queue</str>
- </lst>
-</response>
-----
-
-[[deletestatus]]
-== DELETESTATUS: Delete Status
-
-Deletes the stored response of an already failed or completed <<Asynchronous Calls,Asynchronous Collection API>> call.
-
-`/admin/collections?action=DELETESTATUS&requestid=_request-id_`
-
-=== DELETESTATUS Parameters
-
-`requestid`::
-The request ID of the asynchronous call whose stored response should be cleared.
-
-`flush`::
-Set to `true` to clear all stored completed and failed async request responses.
-
-=== Examples using DELETESTATUS
-
-*Input: Valid Request ID*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=DELETESTATUS&requestid=foo&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <str name="status">successfully removed stored response for [foo]</str>
-</response>
-----
-
-*Input: Invalid Request ID*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=DELETESTATUS&requestid=bar&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <str name="status">[bar] not found in stored responses</str>
-</response>
-----
-
-*Input: Clear All Stored Statuses*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=DELETESTATUS&flush=true&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">1</int>
- </lst>
- <str name="status"> successfully cleared stored collection api responses </str>
-</response>
-----
-
-[[list]]
-== LIST: List Collections
-
-Fetch the names of the collections in the cluster.
-
-`/admin/collections?action=LIST`
-
-=== Examples using LIST
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=LIST
-----
-
-*Output*
-
-[source,json]
-----
-{
- "responseHeader":{
- "status":0,
- "QTime":2011},
- "collections":["collection1",
- "example1",
- "example2"]}
-----
-
-[[addreplicaprop]]
-== ADDREPLICAPROP: Add Replica Property
-
-Assign an arbitrary property to a particular replica and give it the value specified. If the property already exists, it will be overwritten with the new value.
-
-`/admin/collections?action=ADDREPLICAPROP&collection=collectionName&shard=shardName&replica=replicaName&property=propertyName&property.value=value`
-
-=== ADDREPLICAPROP Parameters
-
-`collection`::
-The name of the collection the replica belongs to. This parameter is required.
-
-`shard`::
-The name of the shard the replica belongs to. This parameter is required.
-
-`replica`::
-The replica, e.g., `core_node1`. This parameter is required.
-
-`property`::
-The name of the property to add. This property is required.
-+
-This will have the literal `property.` prepended to distinguish it from system-maintained properties. So these two forms are equivalent:
-+
-`property=special`
-+
-and
-+
-`property=property.special`
-
-`property.value`::
-The value to assign to the property. This parameter is required.
-
-`shardUnique`::
-If `true`, then setting this property in one replica will remove the property from all other replicas in that shard. The default is `false`.
-+
-There is one pre-defined property `preferredLeader` for which `shardUnique` is forced to `true` and an error returned if `shardUnique` is explicitly set to `false`.
-+
-`PreferredLeader` is a boolean property. Any value assigned that is not equal (case insensitive) to `true` will be interpreted as `false` for `preferredLeader`.
-
-=== ADDREPLICAPROP Response
-
-The response will include the status of the request. If the status is anything other than "0", an error message will explain why the request failed.
-
-=== Examples using ADDREPLICAPROP
-
-*Input*
-
-This command would set the "preferredLeader" property (`property.preferredLeader`) to "true" on "core_node1", and remove that property from any other replica in the shard.
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node1&property=preferredLeader&property.value=true&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">46</int>
- </lst>
-</response>
-----
-
-*Input*
-
-This pair of commands will set the "testprop" property (`property.testprop`) to 'value1' and 'value2' respectively for two nodes in the same shard.
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node1&property=testprop&property.value=value1
-
-http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node3&property=property.testprop&property.value=value2
-----
-
-*Input*
-
-This pair of commands would result in "core_node_3" having the "testprop" property (`property.testprop`) value set because the second command specifies `shardUnique=true`, which would cause the property to be removed from "core_node_1".
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node1&property=testprop&property.value=value1
-
-http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node3&property=testprop&property.value=value2&shardUnique=true
-----
-
-[[deletereplicaprop]]
-== DELETEREPLICAPROP: Delete Replica Property
-
-Deletes an arbitrary property from a particular replica.
-
-`/admin/collections?action=DELETEREPLICAPROP&collection=collectionName&shard=_shardName_&replica=_replicaName_&property=_propertyName_`
-
-=== DELETEREPLICAPROP Parameters
-
-`collection`::
-The name of the collection the replica belongs to. This parameter is required.
-
-`shard`::
-The name of the shard the replica belongs to. This parameter is required.
-
-`replica`::
-The replica, e.g., `core_node1`. This parameter is required.
-
-`property`::
-The property to add. This will have the literal `property.` prepended to distinguish it from system-maintained properties. So these two forms are equivalent:
-+
-`property=special`
-+
-and
-+
-`property=property.special`
-
-=== DELETEREPLICAPROP Response
-
-The response will include the status of the request. If the status is anything other than "0", an error message will explain why the request failed.
-
-=== Examples using DELETEREPLICAPROP
-
-*Input*
-
-This command would delete the preferredLeader (`property.preferredLeader`) from core_node1.
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=DELETEREPLICAPROP&shard=shard1&collection=collection1&replica=core_node1&property=preferredLeader&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">9</int>
- </lst>
-</response>
-----
-
-[[balanceshardunique]]
-== BALANCESHARDUNIQUE: Balance a Property Across Nodes
-
-`/admin/collections?action=BALANCESHARDUNIQUE&collection=_collectionName_&property=_propertyName_`
-
-Insures that a particular property is distributed evenly amongst the physical nodes that make up a collection. If the property already exists on a replica, every effort is made to leave it there. If the property is *not* on any replica on a shard, one is chosen and the property is added.
-
-=== BALANCESHARDUNIQUE Parameters
-
-`collection`::
-The name of the collection to balance the property in. This parameter is required.
-
-`property`::
-The property to balance. The literal `property.` is prepended to this property if not specified explicitly. This parameter is required.
-
-`onlyactivenodes`::
-Defaults to `true`. Normally, the property is instantiated on active nodes only. If this parameter is specified as `false`, then inactive nodes are also included for distribution.
-
-`shardUnique`::
-Something of a safety valve. There is one pre-defined property (`preferredLeader`) that defaults this value to `true`. For all other properties that are balanced, this must be set to `true` or an error message will be returned.
-
-=== BALANCESHARDUNIQUE Response
-
-The response will include the status of the request. If the status is anything other than "0", an error message will explain why the request failed.
-
-=== Examples using BALANCESHARDUNIQUE
-
-*Input*
-
-Either of these commands would put the "preferredLeader" property on one replica in every shard in the "collection1" collection.
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=BALANCESHARDUNIQUE&collection=collection1&property=preferredLeader&wt=xml
-
-http://localhost:8983/solr/admin/collections?action=BALANCESHARDUNIQUE&collection=collection1&property=property.preferredLeader&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">9</int>
- </lst>
-</response>
-----
-
-Examining the clusterstate after issuing this call should show exactly one replica in each shard that has this property.
-
-[[rebalanceleaders]]
-== REBALANCELEADERS: Rebalance Leaders
-
-Reassigns leaders in a collection according to the preferredLeader property across active nodes.
-
-`/admin/collections?action=REBALANCELEADERS&collection=collectionName`
-
-Leaders are assigned in a collection according to the `preferredLeader` property on active nodes. This command should be run after the preferredLeader property has been assigned via the BALANCESHARDUNIQUE or ADDREPLICAPROP commands.
-
-NOTE: It is not _required_ that all shards in a collection have a `preferredLeader` property. Rebalancing will only attempt to reassign leadership to those replicas that have the `preferredLeader` property set to `true` _and_ are not currently the shard leader _and_ are currently active.
-
-=== REBALANCELEADERS Parameters
-
-`collection`::
-The name of the collection to rebalance `preferredLeaders` on. This parameter is required.
-
-`maxAtOnce`::
-The maximum number of reassignments to have queue up at once. Values \<=0 are use the default value Integer.MAX_VALUE.
-+
-When this number is reached, the process waits for one or more leaders to be successfully assigned before adding more to the queue.
-
-`maxWaitSeconds`::
-Defaults to `60`. This is the timeout value when waiting for leaders to be reassigned. If `maxAtOnce` is less than the number of reassignments that will take place, this is the maximum interval that any _single_ wait for at least one reassignment.
-+
-For example, if 10 reassignments are to take place and `maxAtOnce` is `1` and `maxWaitSeconds` is `60`, the upper bound on the time that the command may wait is 10 minutes.
-
-=== REBALANCELEADERS Response
-
-The response will include the status of the request. A status of "0" indicates the request was _processed_, not that all assignments were successful. Examine the "Summary" section for that information.
-
-=== Examples using REBALANCELEADERS
-
-*Input*
-
-Either of these commands would cause all the active replicas that had the `preferredLeader` property set and were _not_ already the preferred leader to become leaders.
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=REBALANCELEADERS&collection=collection1&wt=json
-
-http://localhost:8983/solr/admin/collections?action=REBALANCELEADERS&collection=collection1&maxAtOnce=5&maxWaitSeconds=30&wt=json
-----
-
-*Output*
-
-In this example:
-
-* In the "alreadyLeaders" section, core_node5 was already the leader, so there were no changes in leadership for shard1.
-* In the "inactivePreferreds" section, core_node57 had the preferredLeader property set, but the node was not active, the leader for shard7 was not changed. This is considered successful.
-* In the "successes" section, core_node23 was _not_ the leader for shard3, so leadership was assigned to that replica.
-
-The "Summary" section with the "Success" tag indicates that the command rebalanced all _active_ replicas with the preferredLeader property set as requried. If a replica cannot be made leader due to not being healthy (for example, it is on a Solr instance that is not running), it's also considered success.
-
-[source,json]
-----
-{
- "responseHeader":{
- "status":0,
- "QTime":3054},
- "Summary":{
- "Success":"All active replicas with the preferredLeader property set are leaders"},
- "alreadyLeaders":{
- "core_node5":{
- "status":"skipped",
- "msg":"Replica core_node5 is already the leader for shard shard1. No change necessary"}},
- "inactivePreferreds":{
- "core_node57":{
- "status":"skipped",
- "msg":"Replica core_node57 is a referredLeader for shard shard7, but is inactive. No change necessary"}},
- "successes":{
- "shard3":{
- "status":"success",
- "msg":"Successfully changed leader of slice shard3 to core_node23"}}}
-----
-
-Examining the clusterstate after issuing this call should show that every active replica that has the `preferredLeader` property should also have the "leader" property set to _true_.
-
-NOTE: The added work done by an NRT leader is quite small and only present when indexing. The primary use-case is to redistribute the leader role if there are a large number of leaders concentrated on a small number of nodes. Rebalancing will likely not improve performance unless the imbalance of leadership roles is measured in multiples of 10.
-
-NOTE: The BALANCESHARDUNIQUE command that distributes the preferredLeader property does not guarantee perfect distribution and in some collection topologies it is impossible to make that guarantee.
-
-[[forceleader]]
-== FORCELEADER: Force Shard Leader
-
-In the unlikely event of a shard losing its leader, this command can be invoked to force the election of a new leader.
-
-`/admin/collections?action=FORCELEADER&collection=<collectionName>&shard=<shardName>`
-
-=== FORCELEADER Parameters
-
-`collection`::
-The name of the collection. This parameter is required.
-
-`shard`::
-The name of the shard where leader election should occur. This parameter is required.
-
-WARNING: This is an expert level command, and should be invoked only when regular leader election is not working. This may potentially lead to loss of data in the event that the new leader doesn't have certain updates, possibly recent ones, which were acknowledged by the old leader before going down.
-
-[[migratestateformat]]
-== MIGRATESTATEFORMAT: Migrate Cluster State
-
-A expert level utility API to move a collection from shared `clusterstate.json` ZooKeeper node (created with `stateFormat=1`, the default in all Solr releases prior to 5.0) to the per-collection `state.json` stored in ZooKeeper (created with `stateFormat=2`, the current default) seamlessly without any application down-time.
-
-`/admin/collections?action=MIGRATESTATEFORMAT&collection=<collection_name>`
-
-=== MIGRATESTATEFORMAT Parameters
-
-`collection`::
-The name of the collection to be migrated from `clusterstate.json` to its own `state.json` ZooKeeper node. This parameter is required.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-This API is useful in migrating any collections created prior to Solr 5.0 to the more scalable cluster state format now used by default. If a collection was created in any Solr 5.x version or higher, then executing this command is not necessary.
-
-[[backup]]
-== BACKUP: Backup Collection
-
-Backs up Solr collections and associated configurations to a shared filesystem - for example a Network File System.
-
-`/admin/collections?action=BACKUP&name=myBackupName&collection=myCollectionName&location=/path/to/my/shared/drive`
-
-The BACKUP command will backup Solr indexes and configurations for a specified collection. The BACKUP command takes one copy from each shard for the indexes. For configurations, it backs up the configSet that was associated with the collection and metadata.
-
-=== BACKUP Parameters
-
-`collection`::
-The name of the collection to be backed up. This parameter is required.
-
-`location`::
-The location on a shared drive for the backup command to write to. Alternately it can be set as a <<clusterprop,cluster property>>.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-`repository`::
-The name of a repository to be used for the backup. If no repository is specified then the local filesystem repository will be used automatically.
-
-[[restore]]
-== RESTORE: Restore Collection
-
-Restores Solr indexes and associated configurations.
-
-`/admin/collections?action=RESTORE&name=myBackupName&location=/path/to/my/shared/drive&collection=myRestoredCollectionName`
-
-The RESTORE operation will create a collection with the specified name in the collection parameter. You cannot restore into the same collection the backup was taken from. Also the target collection should not be present at the time the API is called as Solr will create it for you.
-
-The collection created will be have the same number of shards and replicas as the original collection, preserving routing information, etc. Optionally, you can override some parameters documented below.
-
-While restoring, if a configSet with the same name exists in ZooKeeper then Solr will reuse that, or else it will upload the backed up configSet in ZooKeeper and use that.
-
-You can use the collection <<createalias,CREATEALIAS>> command to make sure clients don't need to change the endpoint to query or index against the newly restored collection.
-
-=== RESTORE Parameters
-
-`collection`::
-The collection where the indexes will be restored into. This parameter is required.
-
-`location`::
-The location on a shared drive for the RESTORE command to read from. Alternately it can be set as a <<clusterprop,cluster property>>.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-`repository`::
-The name of a repository to be used for the backup. If no repository is specified then the local filesystem repository will be used automatically.
-
-*Override Parameters*
-
-Additionally, there are several parameters that may have been set on the original collection that can be overridden when restoring the backup:
-
-`collection.configName`::
-Defines the name of the configurations to use for this collection. These must already be stored in ZooKeeper. If not provided, Solr will default to the collection name as the configuration name.
-
-`replicationFactor`::
-The number of replicas to be created for each shard.
-
-`nrtReplicas`::
-The number of NRT (Near-Real-Time) replicas to create for this collection. This type of replica maintains a transaction log and updates its index locally. This parameter behaves the same way as setting replicationFactor parameter.
-
-`tlogReplicas`::
-The number of TLOG replicas to create for this collection. This type of replica maintains a transaction log but only updates its index via replication from a leader. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
-
-`pullReplicas`::
-The number of PULL replicas to create for this collection. This type of replica does not maintain a transaction log and only updates its index via replication from a leader. This type is not eligible to become a leader and should not be the only type of replicas in the collection. See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica types.
-
-`maxShardsPerNode`::
-When creating collections, the shards and/or replicas are spread across all available (i.e., live) nodes, and two replicas of the same shard will never be on the same node.
-+
-If a node is not live when the CREATE operation is called, it will not get any parts of the new collection, which could lead to too many replicas being created on a single live node. Defining `maxShardsPerNode` sets a limit on the number of replicas CREATE will spread to each node. If the entire collection can not be fit into the live nodes, no collection will be created at all.
-
-`autoAddReplicas`::
-When set to `true`, enables auto addition of replicas on shared file systems. See the section <<running-solr-on-hdfs.adoc#automatically-add-replicas-in-solrcloud,Automatically Add Replicas in SolrCloud>> for more details on settings and overrides.
-
-`property._name_=_value_`::
-Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
-
-== DELETENODE: Delete Replicas in a Node
-
-Deletes all replicas of all collections in that node. Please note that the node itself will remain as a live node after this operation.
-
-`/admin/collections?action=DELETENODE&node=nodeName`
-
-=== DELETENODE Parameters
-
-`node`::
-The node to be removed. This parameter is required.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-== REPLACENODE: Move All Replicas in a Node to Another
-
-This command recreates replicas in one node (the source) to another node(s) (the target). After each replica is copied, the replicas in the source node are deleted.
-
-For source replicas that are also shard leaders the operation will wait for the number of seconds set with the `timeout` parameter to make sure there's an active replica that can become a leader (either an existing replica becoming a leader or the new replica completing recovery and becoming a leader).
-
-The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the new replicas but only when an Autoscaling policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Preferences>> section for more details.
-
-`/admin/collections?action=REPLACENODE&sourceNode=_source-node_&targetNode=_target-node_`
-
-=== REPLACENODE Parameters
-
-`sourceNode`::
-The source node from which the replicas need to be copied from. This parameter is required.
-
-`targetNode`::
-The target node where replicas will be copied. If this parameter is not provided, Solr will identify nodes automatically based on policies or number of cores in each node.
-
-`parallel`::
-If this flag is set to `true`, all replicas are created in separate threads. Keep in mind that this can lead to very high network and disk I/O if the replicas have very large indices. The default is `false`.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-`timeout`::
-Time in seconds to wait until new replicas are created, and until leader replicas are fully recovered. The default is `300`, or 5 minutes.
-
-[IMPORTANT]
-====
-This operation does not hold necessary locks on the replicas that belong to on the source node. So don't perform other collection operations in this period.
-====
-
-[[movereplica]]
-== MOVEREPLICA: Move a Replica to a New Node
-
-This command moves a replica from one node to a new node. In case of shared filesystems the `dataDir` will be reused.
-
-The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the replica to be moved but only when an Autoscaling policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Preferences>> section for more details.
-
-`/admin/collections?action=MOVEREPLICA&collection=collection&shard=shard&replica=replica&sourceNode=nodeName&targetNode=nodeName`
-
-=== MOVEREPLICA Parameters
-
-`collection`::
-The name of the collection. This parameter is required.
-
-`shard`::
-The name of the shard that the replica belongs to. This parameter is required.
-
-`replica`::
-The name of the replica. This parameter is required.
-
-`sourceNode`::
-The name of the node that contains the replica. This parameter is required.
-
-`targetNode`::
-The name of the destination node. This parameter is required.
-
-`async`::
-Request ID to track this action which will be <<Asynchronous Calls,processed asynchronously>>.
-
-[[utilizenode]]
-== UTILIZENODE: Utilize a New Node
-
-This command can be used to move some replicas from the existing nodes to either a new node or a less loaded node to reduce the load on the existing node.
-
-This uses your autoscaling policies and preferences to identify which replica needs to be moved. It tries to fix any policy violations first and then it tries to move some load off of the most loaded nodes according to the preferences.
-
-`/admin/collections?action=UTILIZENODE&node=nodeName`
-
-=== UTILIZENODE Parameters
-
-`node`:: The name of the node that needs to be utilized. This parameter is required.
-
-
-== Asynchronous Calls
-
-Since some collection API calls can be long running tasks (such as SPLITSHARD), you can optionally have the calls run asynchronously. Specifying `async=<request-id>` enables you to make an asynchronous call, the status of which can be requested using the <<requeststatus,REQUESTSTATUS>> call at any time.
-
-As of now, REQUESTSTATUS does not automatically clean up the tracking data structures, meaning the status of completed or failed tasks stays stored in ZooKeeper unless cleared manually. DELETESTATUS can be used to clear the stored statuses. However, there is a limit of 10,000 on the number of async call responses stored in a cluster.
-
-=== Examples of Async Requests
-
-*Input*
-
-[source,text]
-----
-http://localhost:8983/solr/admin/collections?action=SPLITSHARD&collection=collection1&shard=shard1&async=1000&wt=xml
-----
-
-*Output*
-
-[source,xml]
-----
-<response>
- <lst name="responseHeader">
- <int name="status">0</int>
- <int name="QTime">99</int>
- </lst>
- <str name="requestid">1000</str>
+ <str name="status"> successfully cleared stored collection api responses </str>
</response>
----
diff --git a/solr/solr-ref-guide/src/collections-core-admin.adoc b/solr/solr-ref-guide/src/collections-core-admin.adoc
index ad1b4e7..2090dba 100644
--- a/solr/solr-ref-guide/src/collections-core-admin.adoc
+++ b/solr/solr-ref-guide/src/collections-core-admin.adoc
@@ -34,6 +34,6 @@ image::images/collections-core-admin/collection-admin.png[image,width=653,height
Replicas can be deleted by clicking the red "X" next to the replica name.
-If the shard is inactive, for example after a <<collections-api.adoc#splitshard,SPLITSHARD action>>, an option to delete the shard will appear as a red "X" next to the shard name.
+If the shard is inactive, for example after a <<shard-management.adoc#splitshard,SPLITSHARD action>>, an option to delete the shard will appear as a red "X" next to the shard name.
image::images/collections-core-admin/DeleteShard.png[image,width=486,height=250]
diff --git a/solr/solr-ref-guide/src/colocating-collections.adoc b/solr/solr-ref-guide/src/colocating-collections.adoc
index 9638f9a..9dd064d 100644
--- a/solr/solr-ref-guide/src/colocating-collections.adoc
+++ b/solr/solr-ref-guide/src/colocating-collections.adoc
@@ -28,7 +28,7 @@ _linked_ to the same `withCollection`.
== Create a Colocated Collection
The Create Collection API supports a parameter named `withCollection` which can be used to specify a collection
-with which the replicas of the newly created collection should be colocated. See <<collections-api.adoc#create,Create Collection API>>.
+with which the replicas of the newly created collection should be colocated. See <<collection-management.adoc#create,Create Collection API>>.
`/admin/collections?action=CREATE&name=techproducts&numShards=1&replicationFactor=2&withCollection=tech_categories`
@@ -36,7 +36,7 @@ In the above example, all replicas of the `techproducts` collection will be colo
replica of the `tech_categories` collection.
== Colocating Existing Collections
-When collections already exist beforehand, the <<collections-api.adoc#modifycollection, Modify Collection API>> can be
+When collections already exist beforehand, the <<collection-management.adoc#modifycollection, Modify Collection API>> can be
used to set the `withCollection` parameter so that the two collections can be linked. This will *not* trigger
changes to the cluster automatically because moving a large number of replicas immediately might de-stabilize the system.
Instead, it is recommended that the Suggestions UI page should be consulted on the operations that can be performed
@@ -47,7 +47,7 @@ Example:
== Deleting Colocated Collections
Deleting a collection which has been linked to another will fail unless the link itself is deleted first by using the
-<<collections-api.adoc#modifycollection, Modify Collection API>> to un-set the `withCollection` attribute.
+<<collection-management.adoc#modifycollection, Modify Collection API>> to un-set the `withCollection` attribute.
Example:
`/admin/collections?action=MODIFYCOLLECTION&collection=techproducts&withCollection=`
diff --git a/solr/solr-ref-guide/src/command-line-utilities.adoc b/solr/solr-ref-guide/src/command-line-utilities.adoc
index 1e588e4..cd4e051 100644
--- a/solr/solr-ref-guide/src/command-line-utilities.adoc
+++ b/solr/solr-ref-guide/src/command-line-utilities.adoc
@@ -148,7 +148,7 @@ This can be useful to create a chroot path in ZooKeeper before first cluster sta
This command will add or modify a single cluster property in `clusterprops.json`. Use this command instead of the usual getfile \-> edit \-> putfile cycle.
-Unlike the CLUSTERPROP command on the <<collections-api.adoc#clusterprop,Collections API>>, this command does *not* require a running Solr cluster.
+Unlike the <<cluster-node-management.adoc#clusterprop,CLUSTERPROP command>>, this command does *not* require a running Solr cluster.
[source,bash]
----
diff --git a/solr/solr-ref-guide/src/coreadmin-api.adoc b/solr/solr-ref-guide/src/coreadmin-api.adoc
index 3b2059c..43cb897 100644
--- a/solr/solr-ref-guide/src/coreadmin-api.adoc
+++ b/solr/solr-ref-guide/src/coreadmin-api.adoc
@@ -299,7 +299,7 @@ This example uses the `ranges` parameter with hash ranges 0-500, 501-1000 and 10
The `targetCore` must already exist and must have a compatible schema with the `core` index. A commit is automatically called on the `core` index before it is split.
-This command is used as part of the <<collections-api.adoc#splitshard,SPLITSHARD>> command but it can be used for non-cloud Solr cores as well. When used against a non-cloud core without `split.key` parameter, this action will split the source index and distribute its documents alternately so that each split piece contains an equal number of documents. If the `split.key` parameter is specified then only documents having the same route key will be split from the source index.
+This command is used as part of the <<shard-management.adoc#splitshard,SPLITSHARD>> command but it can be used for non-cloud Solr cores as well. When used against a non-cloud core without `split.key` parameter, this action will split the source index and distribute its documents alternately so that each split piece contains an equal number of documents. If the `split.key` parameter is specified then only documents having the same route key will be split from the source index.
[[coreadmin-requeststatus]]
== REQUESTSTATUS
diff --git a/solr/solr-ref-guide/src/making-and-restoring-backups.adoc b/solr/solr-ref-guide/src/making-and-restoring-backups.adoc
index b603929..559c563 100644
--- a/solr/solr-ref-guide/src/making-and-restoring-backups.adoc
+++ b/solr/solr-ref-guide/src/making-and-restoring-backups.adoc
@@ -28,8 +28,8 @@ NOTE: SolrCloud Backup/Restore requires a shared file system mounted at the same
Two commands are available:
-* `action=BACKUP`: This command backs up Solr indexes and configurations. More information is available in the section <<collections-api.adoc#backup,Backup Collection>>.
-* `action=RESTORE`: This command restores Solr indexes and configurations. More information is available in the section <<collections-api.adoc#restore,Restore Collection>>.
+* `action=BACKUP`: This command backs up Solr indexes and configurations. More information is available in the section <<collection-management.adoc#backup,Backup Collection>>.
+* `action=RESTORE`: This command restores Solr indexes and configurations. More information is available in the section <<collection-management.adoc#restore,Restore Collection>>.
== Standalone Mode Backups
diff --git a/solr/solr-ref-guide/src/replica-management.adoc b/solr/solr-ref-guide/src/replica-management.adoc
new file mode 100644
index 0000000..e81146d
--- /dev/null
+++ b/solr/solr-ref-guide/src/replica-management.adoc
@@ -0,0 +1,338 @@
+= Replica Management Commands
+:page-tocclass: right
+:page-toclevels: 1
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements. See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership. The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License. You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied. See the License for the
+// specific language governing permissions and limitations
+// under the License.
+
+A replica is a physical copy of a shard.
+
+[[addreplica]]
+== ADDREPLICA: Add Replica
+
+Add a replica to a shard in a collection. The node name can be specified if the replica is to be created in a specific node.
+
+The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the new replica but only when an Autoscaling policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Preferences>> section for more details.
+
+`/admin/collections?action=ADDREPLICA&collection=_collection_&shard=_shard_&node=_nodeName_`
+
+=== ADDREPLICA Parameters
+
+`collection`::
+The name of the collection where the replica should be created. This parameter is required.
+
+`shard`::
+The name of the shard to which replica is to be added.
++
+If `shard` is not specified, then `\_route_` must be.
+
+`\_route_`::
+If the exact shard name is not known, users may pass the `\_route_` value and the system would identify the name of the shard.
++
+Ignored if the `shard` parameter is also specified.
+
+`node`::
+The name of the node where the replica should be created.
+
+`instanceDir`::
+The instanceDir for the core that will be created.
+
+`dataDir`::
+The directory in which the core should be created.
+
+`type`::
+The type of replica to create. These possible values are allowed:
++
+--
+* `nrt`: The NRT type maintains a transaction log and updates its index locally. This is the default and the most commonly used.
+* `tlog`: The TLOG type maintains a transaction log but only updates its index via replication.
+* `pull`: The PULL type does not maintain a transaction log and only updates its index via replication. This type is not eligible to become a leader.
+--
++
+See the section <<shards-and-indexing-data-in-solrcloud.adoc#types-of-replicas,Types of Replicas>> for more information about replica type options.
+
+`property._name_=_value_`::
+Set core property _name_ to _value_. See <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details about supported properties and values.
+
+`waitForFinalState`::
+If `true`, the request will complete only when all affected replicas become active. The default is `false`, which means that the API will return the status of the single action, which may be before the new replica is online and active.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>
+
+=== Examples using ADDREPLICA
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=ADDREPLICA&collection=test2&shard=shard2&node=192.167.1.2:8983_solr&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">3764</int>
+ </lst>
+ <lst name="success">
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">3450</int>
+ </lst>
+ <str name="core">test2_shard2_replica4</str>
+ </lst>
+ </lst>
+</response>
+----
+
+[[movereplica]]
+== MOVEREPLICA: Move a Replica to a New Node
+
+This command moves a replica from one node to a new node. In case of shared filesystems the `dataDir` will be reused.
+
+The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the replica to be moved but only when an Autoscaling policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Preferences>> section for more details.
+
+`/admin/collections?action=MOVEREPLICA&collection=collection&shard=shard&replica=replica&sourceNode=nodeName&targetNode=nodeName`
+
+=== MOVEREPLICA Parameters
+
+`collection`::
+The name of the collection. This parameter is required.
+
+`shard`::
+The name of the shard that the replica belongs to. This parameter is required.
+
+`replica`::
+The name of the replica. This parameter is required.
+
+`sourceNode`::
+The name of the node that contains the replica. This parameter is required.
+
+`targetNode`::
+The name of the destination node. This parameter is required.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+[[deletereplica]]
+== DELETEREPLICA: Delete a Replica
+
+Deletes a named replica from the specified collection and shard.
+
+If the corresponding core is up and running the core is unloaded, the entry is removed from the clusterstate, and (by default) delete the instanceDir and dataDir. If the node/core is down, the entry is taken off the clusterstate and if the core comes up later it is automatically unregistered.
+
+`/admin/collections?action=DELETEREPLICA&collection=_collection_&shard=_shard_&replica=_replica_`
+
+=== DELETEREPLICA Parameters
+
+`collection`::
+The name of the collection. This parameter is required.
+
+`shard`::
+The name of the shard that includes the replica to be removed. This parameter is required.
+
+`replica`::
+The name of the replica to remove.
++
+If `count` is used instead, this parameter is not required. Otherwise, this parameter must be supplied.
+
+`count`::
+The number of replicas to remove. If the requested number exceeds the number of replicas, no replicas will be deleted. If there is only one replica, it will not be removed.
++
+If `replica` is used instead, this parameter is not required. Otherwise, this parameter must be supplied.
+
+`deleteInstanceDir`::
+By default Solr will delete the entire instanceDir of the replica that is deleted. Set this to `false` to prevent the instance directory from being deleted.
+
+`deleteDataDir`::
+By default Solr will delete the dataDir of the replica that is deleted. Set this to `false` to prevent the data directory from being deleted.
+
+`deleteIndex`::
+By default Solr will delete the index of the replica that is deleted. Set this to `false` to prevent the index directory from being deleted.
+
+`onlyIfDown`::
+When set to `true`, no action will be taken if the replica is active. Default `false`.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+=== Examples using DELETEREPLICA
+
+*Input*
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=DELETEREPLICA&collection=test2&shard=shard2&replica=core_node3&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">110</int>
+ </lst>
+</response>
+----
+
+[[addreplicaprop]]
+== ADDREPLICAPROP: Add Replica Property
+
+Assign an arbitrary property to a particular replica and give it the value specified. If the property already exists, it will be overwritten with the new value.
+
+`/admin/collections?action=ADDREPLICAPROP&collection=collectionName&shard=shardName&replica=replicaName&property=propertyName&property.value=value`
+
+=== ADDREPLICAPROP Parameters
+
+`collection`::
+The name of the collection the replica belongs to. This parameter is required.
+
+`shard`::
+The name of the shard the replica belongs to. This parameter is required.
+
+`replica`::
+The replica, e.g., `core_node1`. This parameter is required.
+
+`property`::
+The name of the property to add. This property is required.
++
+This will have the literal `property.` prepended to distinguish it from system-maintained properties. So these two forms are equivalent:
++
+`property=special`
++
+and
++
+`property=property.special`
+
+`property.value`::
+The value to assign to the property. This parameter is required.
+
+`shardUnique`::
+If `true`, then setting this property in one replica will remove the property from all other replicas in that shard. The default is `false`.
++
+There is one pre-defined property `preferredLeader` for which `shardUnique` is forced to `true` and an error returned if `shardUnique` is explicitly set to `false`.
++
+`PreferredLeader` is a boolean property. Any value assigned that is not equal (case insensitive) to `true` will be interpreted as `false` for `preferredLeader`.
+
+=== ADDREPLICAPROP Response
+
+The response will include the status of the request. If the status is anything other than "0", an error message will explain why the request failed.
+
+=== Examples using ADDREPLICAPROP
+
+*Input*
+
+This command would set the "preferredLeader" property (`property.preferredLeader`) to "true" on "core_node1", and remove that property from any other replica in the shard.
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node1&property=preferredLeader&property.value=true&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">46</int>
+ </lst>
+</response>
+----
+
+*Input*
+
+This pair of commands will set the "testprop" property (`property.testprop`) to 'value1' and 'value2' respectively for two nodes in the same shard.
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node1&property=testprop&property.value=value1
+
+http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node3&property=property.testprop&property.value=value2
+----
+
+*Input*
+
+This pair of commands would result in "core_node_3" having the "testprop" property (`property.testprop`) value set because the second command specifies `shardUnique=true`, which would cause the property to be removed from "core_node_1".
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node1&property=testprop&property.value=value1
+
+http://localhost:8983/solr/admin/collections?action=ADDREPLICAPROP&shard=shard1&collection=collection1&replica=core_node3&property=testprop&property.value=value2&shardUnique=true
+----
+
+[[deletereplicaprop]]
+== DELETEREPLICAPROP: Delete Replica Property
+
+Deletes an arbitrary property from a particular replica.
+
+`/admin/collections?action=DELETEREPLICAPROP&collection=collectionName&shard=_shardName_&replica=_replicaName_&property=_propertyName_`
+
+=== DELETEREPLICAPROP Parameters
+
+`collection`::
+The name of the collection the replica belongs to. This parameter is required.
+
+`shard`::
+The name of the shard the replica belongs to. This parameter is required.
+
+`replica`::
+The replica, e.g., `core_node1`. This parameter is required.
+
+`property`::
+The property to add. This will have the literal `property.` prepended to distinguish it from system-maintained properties. So these two forms are equivalent:
++
+`property=special`
++
+and
++
+`property=property.special`
+
+=== DELETEREPLICAPROP Response
+
+The response will include the status of the request. If the status is anything other than "0", an error message will explain why the request failed.
+
+=== Examples using DELETEREPLICAPROP
+
+*Input*
+
+This command would delete the preferredLeader (`property.preferredLeader`) from core_node1.
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=DELETEREPLICAPROP&shard=shard1&collection=collection1&replica=core_node1&property=preferredLeader&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">9</int>
+ </lst>
+</response>
+----
diff --git a/solr/solr-ref-guide/src/rule-based-replica-placement.adoc b/solr/solr-ref-guide/src/rule-based-replica-placement.adoc
index 5dbd170..34f990c 100644
--- a/solr/solr-ref-guide/src/rule-based-replica-placement.adoc
+++ b/solr/solr-ref-guide/src/rule-based-replica-placement.adoc
@@ -69,7 +69,7 @@ The nodes are sorted first and the rules are used to sort them. This ensures tha
== Rules for New Shards
-The rules are persisted along with collection state. So, when a new replica is created, the system will assign replicas satisfying the rules. When a new shard is created as a result of using the Collection API's <<collections-api.adoc#createshard,CREATESHARD command>>, ensure that you have created rules specific for that shard name. Rules can be altered using the <<collections-api.adoc#modifycollection,MODIFYCOLLECTION command>>. However, it is not required to do so if the rules do not s [...]
+The rules are persisted along with collection state. So, when a new replica is created, the system will assign replicas satisfying the rules. When a new shard is created as a result of using the Collection API's <<shard-management.adoc#createshard,CREATESHARD command>>, ensure that you have created rules specific for that shard name. Rules can be altered using the <<collection-management.adoc#modifycollection,MODIFYCOLLECTION command>>. However, it is not required to do so if the rules d [...]
The same is applicable to shard splitting. Shard splitting is treated exactly the same way as shard creation. Even though `shard1_1` and `shard1_2` may be created from `shard1`, the rules treat them as distinct, unrelated shards.
@@ -174,4 +174,4 @@ Rules are specified per collection during collection creation as request paramet
snitch=class:EC2Snitch&rule=shard:*,replica:1,dc:dc1&rule=shard:*,replica:<2,dc:dc3
----
-These rules are persisted in `clusterstate.json` in ZooKeeper and are available throughout the lifetime of the collection. This enables the system to perform any future node allocation without direct user interaction. The rules added during collection creation can be modified later using the <<collections-api.adoc#modifycollection,MODIFYCOLLECTION>> API.
+These rules are persisted in `clusterstate.json` in ZooKeeper and are available throughout the lifetime of the collection. This enables the system to perform any future node allocation without direct user interaction. The rules added during collection creation can be modified later using the <<collection-management.adoc#modifycollection,MODIFYCOLLECTION>> API.
diff --git a/solr/solr-ref-guide/src/shard-management.adoc b/solr/solr-ref-guide/src/shard-management.adoc
new file mode 100644
index 0000000..e0b8b3d
--- /dev/null
+++ b/solr/solr-ref-guide/src/shard-management.adoc
@@ -0,0 +1,299 @@
+= Shard Management Commands
+:page-tocclass: right
+:page-toclevels: 1
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements. See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership. The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License. You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied. See the License for the
+// specific language governing permissions and limitations
+// under the License.
+
+In SolrCloud, a shard is a logical partition of a collection. This partition stores part of the entire index for a collection.
+
+The number of shards you have helps to determine how many documents a single collection can contain in total, and also impacts search performance.
+
+[[splitshard]]
+== SPLITSHARD: Split a Shard
+
+`/admin/collections?action=SPLITSHARD&collection=_name_&shard=_shardID_`
+
+Splitting a shard will take an existing shard and break it into two pieces which are written to disk as two (new) shards. The original shard will continue to contain the same data as-is but it will start re-routing requests to the new shards. The new shards will have as many replicas as the original shard. A soft commit is automatically issued after splitting a shard so that documents are made visible on sub-shards. An explicit commit (hard or soft) is not necessary after a split operati [...]
+
+This command allows for seamless splitting and requires no downtime. A shard being split will continue to accept query and indexing requests and will automatically start routing requests to the new shards once this operation is complete. This command can only be used for SolrCloud collections created with `numShards` parameter, meaning collections which rely on Solr's hash-based routing mechanism.
+
+The split is performed by dividing the original shard's hash range into two equal partitions and dividing up the documents in the original shard according to the new sub-ranges. Two parameters discussed below, `ranges` and `split.key` provide further control over how the split occurs.
+
+The newly created shards will have as many replicas as the parent shard, of the same replica types.
+
+When using `splitMethod=rewrite` (default) you must ensure that the node running the leader of the parent shard has enough free disk space i.e., more than twice the index size, for the split to succeed. The API uses the Autoscaling framework to find nodes that can satisfy the disk requirements for the new replicas but only when an Autoscaling policy is configured. Refer to <<solrcloud-autoscaling-policy-preferences.adoc#solrcloud-autoscaling-policy-preferences,Autoscaling Policy and Pref [...]
+
+Also, the first replicas of resulting sub-shards will always be placed on the shard leader node, which may cause Autoscaling policy violations that need to be resolved either automatically (when appropriate triggers are in use) or manually.
+
+Shard splitting can be a long running process. In order to avoid timeouts, you should run this as an <<collections-api.adoc#asynchronous-calls,asynchronous call>>.
+
+=== SPLITSHARD Parameters
+
+`collection`::
+The name of the collection that includes the shard to be split. This parameter is required.
+
+`shard`::
+The name of the shard to be split. This parameter is required when `split.key` is not specified.
+
+`ranges`::
+A comma-separated list of hash ranges in hexadecimal, such as `ranges=0-1f4,1f5-3e8,3e9-5dc`.
++
+This parameter can be used to divide the original shard's hash range into arbitrary hash range intervals specified in hexadecimal. For example, if the original hash range is `0-1500` then adding the parameter: `ranges=0-1f4,1f5-3e8,3e9-5dc` will divide the original shard into three shards with hash range `0-500`, `501-1000`, and `1001-1500` respectively.
+
+`split.key`::
+The key to use for splitting the index.
++
+This parameter can be used to split a shard using a route key such that all documents of the specified route key end up in a single dedicated sub-shard. Providing the `shard` parameter is not required in this case because the route key is enough to figure out the right shard. A route key which spans more than one shard is not supported.
++
+For example, suppose `split.key=A!` hashes to the range `12-15` and belongs to shard 'shard1' with range `0-20`. Splitting by this route key would yield three sub-shards with ranges `0-11`, `12-15` and `16-20`. Note that the sub-shard with the hash range of the route key may also contain documents for other route keys whose hash ranges overlap.
+
+`splitMethod`::
+Currently two methods of shard splitting are supported:
+* `splitMethod=rewrite` (default) after selecting documents to retain in each partition this method creates sub-indexes from
+scratch, which is a lengthy CPU- and I/O-intensive process but results in optimally-sized sub-indexes that don't contain
+any data from documents not belonging to each partition.
+* `splitMethod=link` uses file system-level hard links for creating copies of the original index files and then only modifies the
+file that contains the list of deleted documents in each partition. This method is many times quicker and lighter on resources than the
+`rewrite` method but the resulting sub-indexes are still as large as the original index because they still contain data from documents not
+belonging to the partition. This slows down the replication process and consumes more disk space on replica nodes (the multiple hard-linked
+copies don't occupy additional disk space on the leader node, unless hard-linking is not supported).
+
+`property._name_=_value_`::
+Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
+
+`waitForFinalState`::
+If `true`, the request will complete only when all affected replicas become active. The default is `false`, which means that the API will return the status of the single action, which may be before the new replica is online and active.
+
+`timing`::
+If `true` then each stage of processing will be timed and a `timing` section will be included in response.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>
+
+=== SPLITSHARD Response
+
+The output will include the status of the request and the new shard names, which will use the original shard as their basis, adding an underscore and a number. For example, "shard1" will become "shard1_0" and "shard1_1". If the status is anything other than "success", an error message will explain why the request failed.
+
+=== Examples using SPLITSHARD
+
+*Input*
+
+Split shard1 of the "anotherCollection" collection.
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=SPLITSHARD&collection=anotherCollection&shard=shard1&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">6120</int>
+ </lst>
+ <lst name="success">
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">3673</int>
+ </lst>
+ <str name="core">anotherCollection_shard1_1_replica1</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">3681</int>
+ </lst>
+ <str name="core">anotherCollection_shard1_0_replica1</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">6008</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">6007</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">71</int>
+ </lst>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">0</int>
+ </lst>
+ <str name="core">anotherCollection_shard1_1_replica1</str>
+ <str name="status">EMPTY_BUFFER</str>
+ </lst>
+ <lst>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">0</int>
+ </lst>
+ <str name="core">anotherCollection_shard1_0_replica1</str>
+ <str name="status">EMPTY_BUFFER</str>
+ </lst>
+ </lst>
+</response>
+----
+
+[[createshard]]
+== CREATESHARD: Create a Shard
+
+Shards can only created with this API for collections that use the 'implicit' router (i.e., when the collection was created, `router.name=implicit`). A new shard with a name can be created for an existing 'implicit' collection.
+
+Use SPLITSHARD for collections created with the 'compositeId' router (`router.key=compositeId`).
+
+`/admin/collections?action=CREATESHARD&shard=_shardName_&collection=_name_`
+
+=== CREATESHARD Parameters
+
+`collection`::
+The name of the collection that includes the shard to be split. This parameter is required.
+
+`shard`::
+The name of the shard to be created. This parameter is required.
+
+`createNodeSet`::
+Allows defining the nodes to spread the new collection across. If not provided, the CREATESHARD operation will create shard-replica spread across all live Solr nodes.
++
+The format is a comma-separated list of node_names, such as `localhost:8983_solr,localhost:8984_solr,localhost:8985_solr`.
+
+`property._name_=_value_`::
+Set core property _name_ to _value_. See the section <<defining-core-properties.adoc#defining-core-properties,Defining core.properties>> for details on supported properties and values.
+
+`waitForFinalState`::
+If `true`, the request will complete only when all affected replicas become active. The default is `false`, which means that the API will return the status of the single action, which may be before the new replica is online and active.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+=== CREATESHARD Response
+
+The output will include the status of the request. If the status is anything other than "success", an error message will explain why the request failed.
+
+=== Examples using CREATESHARD
+
+*Input*
+
+Create 'shard-z' for the "anImplicitCollection" collection.
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=CREATESHARD&collection=anImplicitCollection&shard=shard-z&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">558</int>
+ </lst>
+</response>
+----
+
+[[deleteshard]]
+== DELETESHARD: Delete a Shard
+
+Deleting a shard will unload all replicas of the shard, remove them from `clusterstate.json`, and (by default) delete the instanceDir and dataDir for each replica. It will only remove shards that are inactive, or which have no range given for custom sharding.
+
+`/admin/collections?action=DELETESHARD&shard=_shardID_&collection=_name_`
+
+=== DELETESHARD Parameters
+
+`collection`::
+The name of the collection that includes the shard to be deleted. This parameter is required.
+
+`shard`::
+The name of the shard to be deleted. This parameter is required.
+
+`deleteInstanceDir`::
+By default Solr will delete the entire instanceDir of each replica that is deleted. Set this to `false` to prevent the instance directory from being deleted.
+
+`deleteDataDir`::
+By default Solr will delete the dataDir of each replica that is deleted. Set this to `false` to prevent the data directory from being deleted.
+
+`deleteIndex`::
+By default Solr will delete the index of each replica that is deleted. Set this to `false` to prevent the index directory from being deleted.
+
+`async`::
+Request ID to track this action which will be <<collections-api.adoc#asynchronous-calls,processed asynchronously>>.
+
+=== DELETESHARD Response
+
+The output will include the status of the request. If the status is anything other than "success", an error message will explain why the request failed.
+
+=== Examples using DELETESHARD
+
+*Input*
+
+Delete 'shard1' of the "anotherCollection" collection.
+
+[source,text]
+----
+http://localhost:8983/solr/admin/collections?action=DELETESHARD&collection=anotherCollection&shard=shard1&wt=xml
+----
+
+*Output*
+
+[source,xml]
+----
+<response>
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">558</int>
+ </lst>
+ <lst name="success">
+ <lst name="10.0.1.4:8983_solr">
+ <lst name="responseHeader">
+ <int name="status">0</int>
+ <int name="QTime">27</int>
+ </lst>
+ </lst>
+ </lst>
+</response>
+----
+
+[[forceleader]]
+== FORCELEADER: Force Shard Leader
+
+In the unlikely event of a shard losing its leader, this command can be invoked to force the election of a new leader.
+
+`/admin/collections?action=FORCELEADER&collection=<collectionName>&shard=<shardName>`
+
+=== FORCELEADER Parameters
+
+`collection`::
+The name of the collection. This parameter is required.
+
+`shard`::
+The name of the shard where leader election should occur. This parameter is required.
+
+WARNING: This is an expert level command, and should be invoked only when regular leader election is not working. This may potentially lead to loss of data in the event that the new leader doesn't have certain updates, possibly recent ones, which were acknowledged by the old leader before going down.
diff --git a/solr/solr-ref-guide/src/shards-and-indexing-data-in-solrcloud.adoc b/solr/solr-ref-guide/src/shards-and-indexing-data-in-solrcloud.adoc
index b899c5f..1e421bd 100644
--- a/solr/solr-ref-guide/src/shards-and-indexing-data-in-solrcloud.adoc
+++ b/solr/solr-ref-guide/src/shards-and-indexing-data-in-solrcloud.adoc
@@ -92,7 +92,7 @@ By default all replicas serve queries. See the section <<distributed-requests.ad
== Document Routing
-Solr offers the ability to specify the router implementation used by a collection by specifying the `router.name` parameter when <<collections-api.adoc#create,creating your collection>>.
+Solr offers the ability to specify the router implementation used by a collection by specifying the `router.name` parameter when <<collection-management.adoc#create,creating your collection>>.
If you use the `compositeId` router (the default), you can send documents with a prefix in the document ID which will be used to calculate the hash Solr uses to determine the shard a document is sent to for indexing. The prefix can be anything you'd like it to be (it doesn't have to be the shard name, for example), but it must be consistent so Solr behaves consistently.
@@ -116,7 +116,7 @@ When you create a collection in SolrCloud, you decide on the initial number shar
The ability to split shards is in the Collections API. It currently allows splitting a shard into two pieces. The existing shard is left as-is, so the split action effectively makes two copies of the data as new shards. You can delete the old shard at a later time when you're ready.
-More details on how to use shard splitting is in the section on the Collection API's <<collections-api.adoc#splitshard,SPLITSHARD command>>.
+More details on how to use shard splitting is in the section on the Collection API's <<shard-management.adoc#splitshard,SPLITSHARD command>>.
== Ignoring Commits from Client Applications in SolrCloud
diff --git a/solr/solr-ref-guide/src/solr-control-script-reference.adoc b/solr/solr-ref-guide/src/solr-control-script-reference.adoc
index 8e4014e..f071f67 100644
--- a/solr/solr-ref-guide/src/solr-control-script-reference.adoc
+++ b/solr/solr-ref-guide/src/solr-control-script-reference.adoc
@@ -686,7 +686,7 @@ bin/solr zk upconfig -z 111.222.333.444:2181 -n mynewconfig -d /path/to/configse
.Reload Collections When Changing Configurations
[WARNING]
====
-This command does *not* automatically make changes effective! It simply uploads the configuration sets to ZooKeeper. You can use the Collection API's <<collections-api.adoc#reload,RELOAD command>> to reload any collections that uses this configuration set.
+This command does *not* automatically make changes effective! It simply uploads the configuration sets to ZooKeeper. You can use the Collection API's <<collection-management.adoc#reload,RELOAD command>> to reload any collections that uses this configuration set.
====
=== Download a Configuration Set
diff --git a/solr/solr-ref-guide/src/solr-upgrade-notes.adoc b/solr/solr-ref-guide/src/solr-upgrade-notes.adoc
index e3beadb..bf1b71f 100644
--- a/solr/solr-ref-guide/src/solr-upgrade-notes.adoc
+++ b/solr/solr-ref-guide/src/solr-upgrade-notes.adoc
@@ -36,7 +36,7 @@ When upgrading to Solr 7.6, users should be aware of the following major changes
*Collections*
-* The JSON parameter to set cluster-wide default cluster properties with the <<collections-api.adoc#clusterprop,CLUSTERPROP>> command has changed.
+* The JSON parameter to set cluster-wide default cluster properties with the <<cluster-node-management.adoc#clusterprop,CLUSTERPROP>> command has changed.
+
The old syntax nested the defaults into a property named `clusterDefaults`. The new syntax uses only `defaults`. The command to use is still `set-obj-property`.
+
@@ -165,7 +165,7 @@ When upgrading to Solr 7.3, users should be aware of the following major changes
+
This means to upgrade to Solr 8 in the future, you will need to be on Solr 7.3 or higher.
-* Replicas which are not up-to-date are no longer allowed to become leader. Use the <<collections-api.adoc#forceleader,FORCELEADER command>> of the Collections API to allow these replicas become leader.
+* Replicas which are not up-to-date are no longer allowed to become leader. Use the <<shard-management.adoc#forceleader,FORCELEADER command>> of the Collections API to allow these replicas become leader.
*Spatial*
@@ -215,7 +215,7 @@ When upgrading to Solr 7.1, users should be aware of the following major changes
+
Existing users of this feature should not have to change anything. However, they should note these changes:
-** Behavior: Changing the `autoAddReplicas` property from disabled (`false`) to enabled (`true`) using <<collections-api.adoc#modifycollection,MODIFYCOLLECTION API>> no longer replaces down replicas for the collection immediately. Instead, replicas are only added if a node containing them went down while `autoAddReplicas` was enabled. The parameters `autoReplicaFailoverBadNodeExpiration` and `autoReplicaFailoverWorkLoopDelay` are no longer used.
+** Behavior: Changing the `autoAddReplicas` property from disabled (`false`) to enabled (`true`) using <<collection-management.adoc#modifycollection,MODIFYCOLLECTION API>> no longer replaces down replicas for the collection immediately. Instead, replicas are only added if a node containing them went down while `autoAddReplicas` was enabled. The parameters `autoReplicaFailoverBadNodeExpiration` and `autoReplicaFailoverWorkLoopDelay` are no longer used.
** Deprecations: Enabling/disabling autoAddReplicas cluster-wide with the API will be deprecated; use suspend/resume trigger APIs with `name=".auto_add_replicas"` instead.
+
More information about the changes to this feature can be found in the section <<solrcloud-autoscaling-auto-add-replicas.adoc#solrcloud-autoscaling-auto-add-replicas,SolrCloud Automatically Adding Replicas>>.
diff --git a/solr/solr-ref-guide/src/time-routed-aliases.adoc b/solr/solr-ref-guide/src/time-routed-aliases.adoc
index 3ef0e19..9100548 100644
--- a/solr/solr-ref-guide/src/time-routed-aliases.adoc
+++ b/solr/solr-ref-guide/src/time-routed-aliases.adoc
@@ -28,9 +28,9 @@ If you need to store a lot of timestamped data in Solr, such as logs or IoT sens
== How It Works
-First you create a time routed aliases using the <<collections-api.adoc#createalias,CREATEALIAS>> command with some
+First you create a time routed aliases using the <<collection-aliasing.adoc#createalias,CREATEALIAS>> command with some
router settings.
-Most of the settings are editable at a later time using the <<collections-api.adoc#aliasprop,ALIASPROP>> command.
+Most of the settings are editable at a later time using the <<collection-aliasing.adoc#aliasprop,ALIASPROP>> command.
The first collection will be created automatically, along with an alias pointing to it.
Each underlying Solr "core" in a collection that is a member of a TRA has a special core property referencing the alias.