You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@couchdb.apache.org by Sebastian Cohnen <se...@googlemail.com> on 2010/12/17 19:03:05 UTC
Re: Problem with pull repl
I'll try that, thanks. But isn't the reported error a bit odd? why is couch trying to JSON encode a erlang pid? at least it looks like it is trying to do so...
On 17.12.2010, at 17:39, Filipe David Manana wrote:
> Hi Sesbatian,
>
> Try increasing the HTTP sessions and pipeline values in the .ini:
>
> https://github.com/fdmanana/couchdb/blob/trunk/etc/couchdb/default.ini.tpl.in#L138
>
> regards
>
> On Fri, Dec 17, 2010 at 4:33 PM, Sebastian Cohnen
> <se...@googlemail.com> wrote:
>> Hi,
>>
>> the setup I've described in COUCHDB-968 is causing trouble (again). Pull replication is reproducable dying with {exit,{json_encode,{bad_term,<0.133.0>}}}. I've uploaded the log [1] from which I've changed credentials, db and host name. The log is also truncated since it was >40k lines and it looks like documents were included too.
>>
>> Thanks in advance!
>>
>> Sebastian
>>
>>
>> [1] http://friendpaste.com/4shMkdhCwmZQY9ITbSGu5T
>>
>>
>>
>
>
>
> --
> Filipe David Manana,
> fdmanana@gmail.com, fdmanana@apache.org
>
> "Reasonable men adapt themselves to the world.
> Unreasonable men adapt the world to themselves.
> That's why all progress depends on unreasonable men."
Re: Problem with pull repl
Posted by Sebastian Cohnen <se...@googlemail.com>.
it is not fixed I think, since this couch is compiled from the 1.0.x branch (not sure about the exact version right now, but only a week old max)
On 17.12.2010, at 19:26, Filipe David Manana wrote:
> On Fri, Dec 17, 2010 at 6:03 PM, Sebastian Cohnen
> <se...@googlemail.com> wrote:
>> I'll try that, thanks. But isn't the reported error a bit odd? why is couch trying to JSON encode a erlang pid? at least it looks like it is trying to do so...
>
> It's because there's a sort of try catch handler which tries to json
> encode every exception/error. I believe this should be fixed (or
> minimized) in the 1.0.x branch.
>
>>
>>
>> On 17.12.2010, at 17:39, Filipe David Manana wrote:
>>
>>> Hi Sesbatian,
>>>
>>> Try increasing the HTTP sessions and pipeline values in the .ini:
>>>
>>> https://github.com/fdmanana/couchdb/blob/trunk/etc/couchdb/default.ini.tpl.in#L138
>>>
>>> regards
>>>
>>> On Fri, Dec 17, 2010 at 4:33 PM, Sebastian Cohnen
>>> <se...@googlemail.com> wrote:
>>>> Hi,
>>>>
>>>> the setup I've described in COUCHDB-968 is causing trouble (again). Pull replication is reproducable dying with {exit,{json_encode,{bad_term,<0.133.0>}}}. I've uploaded the log [1] from which I've changed credentials, db and host name. The log is also truncated since it was >40k lines and it looks like documents were included too.
>>>>
>>>> Thanks in advance!
>>>>
>>>> Sebastian
>>>>
>>>>
>>>> [1] http://friendpaste.com/4shMkdhCwmZQY9ITbSGu5T
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Filipe David Manana,
>>> fdmanana@gmail.com, fdmanana@apache.org
>>>
>>> "Reasonable men adapt themselves to the world.
>>> Unreasonable men adapt the world to themselves.
>>> That's why all progress depends on unreasonable men."
>>
>>
>
>
>
> --
> Filipe David Manana,
> fdmanana@gmail.com, fdmanana@apache.org
>
> "Reasonable men adapt themselves to the world.
> Unreasonable men adapt the world to themselves.
> That's why all progress depends on unreasonable men."
Re: Problem with pull repl
Posted by Randall Leeds <ra...@gmail.com>.
On Mon, Dec 20, 2010 at 18:04, Randall Leeds <ra...@gmail.com> wrote:
> This is because pull replication ignores these settings. Sorry I keep
> forgetting to put it in JIRA, it's a two line fix.
>
Filed with patch. Untested (even uncompiled, sorry, see the report).
https://issues.apache.org/jira/browse/COUCHDB-992
>
> Ill do it when I'm home tonight if no one beats me to it.
>
> couch_rep_reader:init if I remember correctly. It's passing the constants
> instead of the .ini values.
>
> (Sent while mobile, or i'd just upload a patch right now)
>
> On Dec 20, 2010 2:14 AM, "Sebastian Cohnen" <se...@googlemail.com>
> wrote:
>> We can reproduce the error with session and pipeline values up to 100. we
>> always get the same error.
>>
>> On 17.12.2010, at 19:26, Filipe David Manana wrote:
>>
>>> On Fri, Dec 17, 2010 at 6:03 PM, Sebastian Cohnen
>>> <se...@googlemail.com> wrote:
>>>> I'll try that, thanks. But isn't the reported error a bit odd? why is
>>>> couch trying to JSON encode a erlang pid? at least it looks like it is
>>>> trying to do so...
>>>
>>> It's because there's a sort of try catch handler which tries to json
>>> encode every exception/error. I believe this should be fixed (or
>>> minimized) in the 1.0.x branch.
>>>
>>>>
>>>>
>>>> On 17.12.2010, at 17:39, Filipe David Manana wrote:
>>>>
>>>>> Hi Sesbatian,
>>>>>
>>>>> Try increasing the HTTP sessions and pipeline values in the .ini:
>>>>>
>>>>>
>>>>> https://github.com/fdmanana/couchdb/blob/trunk/etc/couchdb/default.ini.tpl.in#L138
>>>>>
>>>>> regards
>>>>>
>>>>> On Fri, Dec 17, 2010 at 4:33 PM, Sebastian Cohnen
>>>>> <se...@googlemail.com> wrote:
>>>>>> Hi,
>>>>>>
>>>>>> the setup I've described in COUCHDB-968 is causing trouble (again).
>>>>>> Pull replication is reproducable dying with
>>>>>> {exit,{json_encode,{bad_term,<0.133.0>}}}. I've uploaded the log [1] from
>>>>>> which I've changed credentials, db and host name. The log is also truncated
>>>>>> since it was >40k lines and it looks like documents were included too.
>>>>>>
>>>>>> Thanks in advance!
>>>>>>
>>>>>> Sebastian
>>>>>>
>>>>>>
>>>>>> [1] http://friendpaste.com/4shMkdhCwmZQY9ITbSGu5T
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Filipe David Manana,
>>>>> fdmanana@gmail.com, fdmanana@apache.org
>>>>>
>>>>> "Reasonable men adapt themselves to the world.
>>>>> Unreasonable men adapt the world to themselves.
>>>>> That's why all progress depends on unreasonable men."
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Filipe David Manana,
>>> fdmanana@gmail.com, fdmanana@apache.org
>>>
>>> "Reasonable men adapt themselves to the world.
>>> Unreasonable men adapt the world to themselves.
>>> That's why all progress depends on unreasonable men."
>>
>
Re: Problem with pull repl
Posted by Sebastian Cohnen <se...@googlemail.com>.
We definitely saw a change, when setting the pipeline size to 1 (disabling it). Reading the logs it looks like at least this value is not ignored.
The initial problem to our error was already solved by adam on IRC yesterday with this patch http://friendpaste.com/5lLJ0ORh3KPCm1xwwY8Tye
On 21.12.2010, at 03:04, Randall Leeds wrote:
> This is because pull replication ignores these settings. Sorry I keep
> forgetting to put it in JIRA, it's a two line fix.
>
> Ill do it when I'm home tonight if no one beats me to it.
>
> couch_rep_reader:init if I remember correctly. It's passing the constants
> instead of the .ini values.
>
> (Sent while mobile, or i'd just upload a patch right now)
> On Dec 20, 2010 2:14 AM, "Sebastian Cohnen" <se...@googlemail.com>
> wrote:
>> We can reproduce the error with session and pipeline values up to 100. we
> always get the same error.
>>
>> On 17.12.2010, at 19:26, Filipe David Manana wrote:
>>
>>> On Fri, Dec 17, 2010 at 6:03 PM, Sebastian Cohnen
>>> <se...@googlemail.com> wrote:
>>>> I'll try that, thanks. But isn't the reported error a bit odd? why is
> couch trying to JSON encode a erlang pid? at least it looks like it is
> trying to do so...
>>>
>>> It's because there's a sort of try catch handler which tries to json
>>> encode every exception/error. I believe this should be fixed (or
>>> minimized) in the 1.0.x branch.
>>>
>>>>
>>>>
>>>> On 17.12.2010, at 17:39, Filipe David Manana wrote:
>>>>
>>>>> Hi Sesbatian,
>>>>>
>>>>> Try increasing the HTTP sessions and pipeline values in the .ini:
>>>>>
>>>>>
> https://github.com/fdmanana/couchdb/blob/trunk/etc/couchdb/default.ini.tpl.in#L138
>>>>>
>>>>> regards
>>>>>
>>>>> On Fri, Dec 17, 2010 at 4:33 PM, Sebastian Cohnen
>>>>> <se...@googlemail.com> wrote:
>>>>>> Hi,
>>>>>>
>>>>>> the setup I've described in COUCHDB-968 is causing trouble (again).
> Pull replication is reproducable dying with
> {exit,{json_encode,{bad_term,<0.133.0>}}}. I've uploaded the log [1] from
> which I've changed credentials, db and host name. The log is also truncated
> since it was >40k lines and it looks like documents were included too.
>>>>>>
>>>>>> Thanks in advance!
>>>>>>
>>>>>> Sebastian
>>>>>>
>>>>>>
>>>>>> [1] http://friendpaste.com/4shMkdhCwmZQY9ITbSGu5T
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Filipe David Manana,
>>>>> fdmanana@gmail.com, fdmanana@apache.org
>>>>>
>>>>> "Reasonable men adapt themselves to the world.
>>>>> Unreasonable men adapt the world to themselves.
>>>>> That's why all progress depends on unreasonable men."
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Filipe David Manana,
>>> fdmanana@gmail.com, fdmanana@apache.org
>>>
>>> "Reasonable men adapt themselves to the world.
>>> Unreasonable men adapt the world to themselves.
>>> That's why all progress depends on unreasonable men."
>>
Re: Problem with pull repl
Posted by Randall Leeds <ra...@gmail.com>.
This is because pull replication ignores these settings. Sorry I keep
forgetting to put it in JIRA, it's a two line fix.
Ill do it when I'm home tonight if no one beats me to it.
couch_rep_reader:init if I remember correctly. It's passing the constants
instead of the .ini values.
(Sent while mobile, or i'd just upload a patch right now)
On Dec 20, 2010 2:14 AM, "Sebastian Cohnen" <se...@googlemail.com>
wrote:
> We can reproduce the error with session and pipeline values up to 100. we
always get the same error.
>
> On 17.12.2010, at 19:26, Filipe David Manana wrote:
>
>> On Fri, Dec 17, 2010 at 6:03 PM, Sebastian Cohnen
>> <se...@googlemail.com> wrote:
>>> I'll try that, thanks. But isn't the reported error a bit odd? why is
couch trying to JSON encode a erlang pid? at least it looks like it is
trying to do so...
>>
>> It's because there's a sort of try catch handler which tries to json
>> encode every exception/error. I believe this should be fixed (or
>> minimized) in the 1.0.x branch.
>>
>>>
>>>
>>> On 17.12.2010, at 17:39, Filipe David Manana wrote:
>>>
>>>> Hi Sesbatian,
>>>>
>>>> Try increasing the HTTP sessions and pipeline values in the .ini:
>>>>
>>>>
https://github.com/fdmanana/couchdb/blob/trunk/etc/couchdb/default.ini.tpl.in#L138
>>>>
>>>> regards
>>>>
>>>> On Fri, Dec 17, 2010 at 4:33 PM, Sebastian Cohnen
>>>> <se...@googlemail.com> wrote:
>>>>> Hi,
>>>>>
>>>>> the setup I've described in COUCHDB-968 is causing trouble (again).
Pull replication is reproducable dying with
{exit,{json_encode,{bad_term,<0.133.0>}}}. I've uploaded the log [1] from
which I've changed credentials, db and host name. The log is also truncated
since it was >40k lines and it looks like documents were included too.
>>>>>
>>>>> Thanks in advance!
>>>>>
>>>>> Sebastian
>>>>>
>>>>>
>>>>> [1] http://friendpaste.com/4shMkdhCwmZQY9ITbSGu5T
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Filipe David Manana,
>>>> fdmanana@gmail.com, fdmanana@apache.org
>>>>
>>>> "Reasonable men adapt themselves to the world.
>>>> Unreasonable men adapt the world to themselves.
>>>> That's why all progress depends on unreasonable men."
>>>
>>>
>>
>>
>>
>> --
>> Filipe David Manana,
>> fdmanana@gmail.com, fdmanana@apache.org
>>
>> "Reasonable men adapt themselves to the world.
>> Unreasonable men adapt the world to themselves.
>> That's why all progress depends on unreasonable men."
>
Re: Problem with pull repl
Posted by Sebastian Cohnen <se...@googlemail.com>.
We can reproduce the error with session and pipeline values up to 100. we always get the same error.
On 17.12.2010, at 19:26, Filipe David Manana wrote:
> On Fri, Dec 17, 2010 at 6:03 PM, Sebastian Cohnen
> <se...@googlemail.com> wrote:
>> I'll try that, thanks. But isn't the reported error a bit odd? why is couch trying to JSON encode a erlang pid? at least it looks like it is trying to do so...
>
> It's because there's a sort of try catch handler which tries to json
> encode every exception/error. I believe this should be fixed (or
> minimized) in the 1.0.x branch.
>
>>
>>
>> On 17.12.2010, at 17:39, Filipe David Manana wrote:
>>
>>> Hi Sesbatian,
>>>
>>> Try increasing the HTTP sessions and pipeline values in the .ini:
>>>
>>> https://github.com/fdmanana/couchdb/blob/trunk/etc/couchdb/default.ini.tpl.in#L138
>>>
>>> regards
>>>
>>> On Fri, Dec 17, 2010 at 4:33 PM, Sebastian Cohnen
>>> <se...@googlemail.com> wrote:
>>>> Hi,
>>>>
>>>> the setup I've described in COUCHDB-968 is causing trouble (again). Pull replication is reproducable dying with {exit,{json_encode,{bad_term,<0.133.0>}}}. I've uploaded the log [1] from which I've changed credentials, db and host name. The log is also truncated since it was >40k lines and it looks like documents were included too.
>>>>
>>>> Thanks in advance!
>>>>
>>>> Sebastian
>>>>
>>>>
>>>> [1] http://friendpaste.com/4shMkdhCwmZQY9ITbSGu5T
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Filipe David Manana,
>>> fdmanana@gmail.com, fdmanana@apache.org
>>>
>>> "Reasonable men adapt themselves to the world.
>>> Unreasonable men adapt the world to themselves.
>>> That's why all progress depends on unreasonable men."
>>
>>
>
>
>
> --
> Filipe David Manana,
> fdmanana@gmail.com, fdmanana@apache.org
>
> "Reasonable men adapt themselves to the world.
> Unreasonable men adapt the world to themselves.
> That's why all progress depends on unreasonable men."
Re: Problem with pull repl
Posted by Filipe David Manana <fd...@apache.org>.
On Fri, Dec 17, 2010 at 6:03 PM, Sebastian Cohnen
<se...@googlemail.com> wrote:
> I'll try that, thanks. But isn't the reported error a bit odd? why is couch trying to JSON encode a erlang pid? at least it looks like it is trying to do so...
It's because there's a sort of try catch handler which tries to json
encode every exception/error. I believe this should be fixed (or
minimized) in the 1.0.x branch.
>
>
> On 17.12.2010, at 17:39, Filipe David Manana wrote:
>
>> Hi Sesbatian,
>>
>> Try increasing the HTTP sessions and pipeline values in the .ini:
>>
>> https://github.com/fdmanana/couchdb/blob/trunk/etc/couchdb/default.ini.tpl.in#L138
>>
>> regards
>>
>> On Fri, Dec 17, 2010 at 4:33 PM, Sebastian Cohnen
>> <se...@googlemail.com> wrote:
>>> Hi,
>>>
>>> the setup I've described in COUCHDB-968 is causing trouble (again). Pull replication is reproducable dying with {exit,{json_encode,{bad_term,<0.133.0>}}}. I've uploaded the log [1] from which I've changed credentials, db and host name. The log is also truncated since it was >40k lines and it looks like documents were included too.
>>>
>>> Thanks in advance!
>>>
>>> Sebastian
>>>
>>>
>>> [1] http://friendpaste.com/4shMkdhCwmZQY9ITbSGu5T
>>>
>>>
>>>
>>
>>
>>
>> --
>> Filipe David Manana,
>> fdmanana@gmail.com, fdmanana@apache.org
>>
>> "Reasonable men adapt themselves to the world.
>> Unreasonable men adapt the world to themselves.
>> That's why all progress depends on unreasonable men."
>
>
--
Filipe David Manana,
fdmanana@gmail.com, fdmanana@apache.org
"Reasonable men adapt themselves to the world.
Unreasonable men adapt the world to themselves.
That's why all progress depends on unreasonable men."