(flink-cdc) branch master updated: [FLINK-34685][cdc][doc] add kubernetes.md under deployment directory. (#3165)

[re...@apache.org]

This is an automated email from the ASF dual-hosted git repository.

renqs pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/flink-cdc.git


The following commit(s) were added to refs/heads/master by this push:
     new 1fd0cfec8 [FLINK-34685][cdc][doc] add kubernetes.md under deployment directory. (#3165)
1fd0cfec8 is described below

commit 1fd0cfec8970cf3216c06155152dfc9d308eb669
Author: Kunni <lv...@alibaba-inc.com>
AuthorDate: Tue Mar 19 12:20:26 2024 +0800

    [FLINK-34685][cdc][doc] add kubernetes.md under deployment directory. (#3165)
---
 docs/content/docs/deployment/kubernetes.md | 134 +++++++++++++++++++++++++++++
 1 file changed, 134 insertions(+)

diff --git a/docs/content/docs/deployment/kubernetes.md b/docs/content/docs/deployment/kubernetes.md
index f8ca63fc4..158757276 100644
--- a/docs/content/docs/deployment/kubernetes.md
+++ b/docs/content/docs/deployment/kubernetes.md
@@ -23,3 +23,137 @@ KIND, either express or implied.  See the License for the
 specific language governing permissions and limitations
 under the License.
 -->
+
+# Introduction
+
+Kubernetes is a popular container-orchestration system for automating computer application deployment, scaling, and management.
+Flink's native Kubernetes integration allows you to directly deploy Flink on a running Kubernetes cluster.
+Moreover, Flink is able to dynamically allocate and de-allocate TaskManagers depending on the required resources because it can directly talk to Kubernetes.
+
+Apache Flink also provides a Kubernetes operator for managing Flink clusters on Kubernetes. It supports both standalone and native deployment mode and greatly simplifies deployment, configuration and the life cycle management of Flink resources on Kubernetes.
+
+For more information, please refer to the [Flink Kubernetes Operator documentation](https://nightlies.apache.org/flink/flink-kubernetes-operator-docs-main/docs/concepts/overview/).
+
+## Preparation
+
+The doc assumes a running Kubernetes cluster fulfilling the following requirements:
+
+- Kubernetes >= 1.9.
+- KubeConfig, which has access to list, create, delete pods and services, configurable via `~/.kube/config`. You can verify permissions by running `kubectl auth can-i <list|create|edit|delete> pods`.
+- Enabled Kubernetes DNS.
+- `default` service account with [RBAC](https://nightlies.apache.org/flink/flink-docs-master/docs/deployment/resource-providers/native_kubernetes/#rbac) permissions to create, delete pods.
+
+If you have problems setting up a Kubernetes cluster, please take a look at [how to setup a Kubernetes cluster](https://kubernetes.io/docs/setup/).
+
+## Session Mode
+
+Flink runs on all UNIX-like environments, i.e. Linux, Mac OS X, and Cygwin (for Windows).  
+You can refer [overview]({{< ref "docs/connectors/overview" >}}) to check supported versions and download [the binary release](https://flink.apache.org/downloads/) of Flink,
+then extract the archive:
+
+```bash
+tar -xzf flink-*.tgz
+```
+
+You should set `FLINK_HOME` environment variables like:
+
+```bash
+export FLINK_HOME=/path/flink-*
+```
+
+### Start a session cluster
+
+To start a session cluster on k8s, run the bash script that comes with Flink:
+
+```bash
+cd /path/flink-*
+./bin/kubernetes-session.sh -Dkubernetes.cluster-id=my-first-flink-cluster
+```
+
+After successful startup, the return information is as follows：
+
+```
+org.apache.flink.kubernetes.utils.KubernetesUtils            [] - Kubernetes deployment requires a fixed port. Configuration blob.server.port will be set to 6124
+org.apache.flink.kubernetes.utils.KubernetesUtils            [] - Kubernetes deployment requires a fixed port. Configuration taskmanager.rpc.port will be set to 6122
+org.apache.flink.kubernetes.KubernetesClusterDescriptor      [] - Please note that Flink client operations(e.g. cancel, list, stop, savepoint, etc.) won't work from outside the Kubernetes cluster since 'kubernetes.rest-service.exposed.type' has been set to ClusterIP.
+org.apache.flink.kubernetes.KubernetesClusterDescriptor      [] - Create flink session cluster my-first-flink-cluster successfully, JobManager Web Interface: http://my-first-flink-cluster-rest.default:8081
+```
+
+{{< hint info >}}
+please refer to [Flink documentation](https://nightlies.apache.org/flink/flink-docs-master/docs/deployment/resource-providers/native_kubernetes/#accessing-flinks-web-ui) to expose Flink’s Web UI and REST endpoint.   
+You should ensure that REST endpoint can be accessed by the node of your submission.
+{{< /hint >}}
+Then, you need to add these two config to your flink-conf.yaml:
+
+```yaml
+rest.bind-port: {{REST_PORT}}
+rest.address: {{NODE_IP}}
+```
+
+{{REST_PORT}} and {{NODE_IP}} should be replaced by the actual values of your JobManager Web Interface.
+
+### Set up Flink CDC
+Download the tar file of Flink CDC from [release page](https://github.com/apache/flink-cdc/releases), then extract the archive:
+
+```bash
+tar -xzf flink-cdc-*.tar.gz
+```
+
+Extracted `flink-cdc` contains four directories: `bin`,`lib`,`log` and `conf`.
+
+Download the connector jars from [release page](https://github.com/apache/flink-cdc/releases), and move it to the `lib` directory.    
+Download links are available only for stable releases, SNAPSHOT dependencies need to be built based on specific branch by yourself.
+
+### Submit a Flink CDC Job
+Here is an example file for synchronizing the entire database `mysql-to-doris.yaml`：
+
+```yaml
+################################################################################
+# Description: Sync MySQL all tables to Doris
+################################################################################
+source:
+ type: mysql
+ hostname: localhost
+ port: 3306
+ username: root
+ password: 123456
+ tables: app_db.\.*
+ server-id: 5400-5404
+ server-time-zone: UTC
+
+sink:
+ type: doris
+ fenodes: 127.0.0.1:8030
+ username: root
+ password: ""
+
+pipeline:
+ name: Sync MySQL Database to Doris
+ parallelism: 2
+
+```
+
+You need to modify the configuration file according to your needs, refer to connectors more information.   
+- [MySQL pipeline connector]({{< ref "docs/connectors/mysql.md" >}})
+- [Apache Doris pipeline connector]({{< ref "docs/connectors/doris.md" >}})       
+
+Finally, submit job to Flink Standalone cluster using Cli.
+
+```bash
+cd /path/flink-cdc-*
+./bin/flink-cdc.sh mysql-to-doris.yaml
+```
+
+After successful submission, the return information is as follows：
+
+```bash
+Pipeline has been submitted to cluster.
+Job ID: ae30f4580f1918bebf16752d4963dc54
+Job Description: Sync MySQL Database to Doris
+```
+
+Then you can find a job named `Sync MySQL Database to Doris` running through Flink Web UI.  
+
+{{< hint info >}}
+Please note that submitting with **native application mode** and **Flink Kubernetes operator** are not supported for now.
+{{< /hint >}}
\ No newline at end of file