You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@httpd.apache.org by Michael Felt <ma...@gmail.com> on 2012/09/14 01:08:30 UTC
which apr-util is really "desired" for the 2.2.X branch
Hi. I downloaded the new 2.2.X branch and ran buildconf. It suggested I get
apr and apr-util using svn and I was a bit surprised when it suggested
.../branches/1.3.x for apr-util
Are there compatibility issues I am not aware of as I had always been using
the 1.4.x apr-util before.
Just checking. Thanks.
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Guenter Knauf <fu...@apache.org>.
Hi Michael,
Am 20.09.2012 17:48, schrieb Michael Felt:
> this was about what to use with httpd today. And you answered that, if I
> understood correctly - package both httpd 2.2.X and httpd 2.4.X with
> apr-1.4.6 and apr-util-1.4.1 - because these "exist" officially.
yep - though with 2.2.x you dont have to care at all since it ships with
already with "desired" APR / APU (see below ./srclib); and even more
nice is you can just call configure with --with-included-apr to use them ;-)
for 2.4.x we did in the past provide httpd-2.4.x-deps tarballs which
contain APR / APU, see:
http://www.apache.org/dist/httpd/
Gün.
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Guenter Knauf <fu...@apache.org>.
Hi Michael,
Am 20.09.2012 17:48, schrieb Michael Felt:
> this was about what to use with httpd today. And you answered that, if I
> understood correctly - package both httpd 2.2.X and httpd 2.4.X with
> apr-1.4.6 and apr-util-1.4.1 - because these "exist" officially.
yep - though with 2.2.x you dont have to care at all since it ships with
already with "desired" APR / APU (see below ./srclib); and even more
nice is you can just call configure with --with-included-apr to use them ;-)
for 2.4.x we did in the past provide httpd-2.4.x-deps tarballs which
contain APR / APU, see:
http://www.apache.org/dist/httpd/
Gün.
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Michael Felt <ma...@gmail.com>.
Nod - about where APR is going - dev@apr..., "new threads!"
this was about what to use with httpd today. And you answered that, if I
understood correctly - package both httpd 2.2.X and httpd 2.4.X with
apr-1.4.6 and apr-util-1.4.1 - because these "exist" officially.
Many thanks!
On Wed, Sep 19, 2012 at 10:48 PM, Guenter Knauf <fu...@apache.org> wrote:
> Hi Michael,
> Am 19.09.2012 20:51, schrieb Michael Felt:
>
> I have downloading an apr-1.5.X via SVN.
>>
> then you have the STATUS file which lists the details I post below inline
> ...
>
>
> They are working on a release of apr-util-1.5.1. I may not have looked
>> correctly, but I do not see a release of apr-1.5.0.
>>
> yes, 1.5.0 was only tagged but not released - we moved forward due to some
> probs ...
>
>
> I have built against these versions with no issues I have noticed for
>> httpd (make check for apr-util-1.5.1 is not perfect) - however, as a
>> packager I would "prefer" to be packaging against/with known release
>> numbers.
>>
> then you have to wait until the APR folks either release 1.5.1, or ditch
> it and again move on to 1.5.2 ...
>
>
> I shall package the current apr-1.5.0, but just call it "beta", and
>> apr-util once it is released.
>>
> no; then you would pack a version which was never released! The recent
> offical version is 1.4.1, and this will stay until we release something
> newer ...
>
> see here for the current official releases:
> http://apr.apache.org/
>
> please direct further discussion about APR/APU/API to the apr devel list
> ;-)
>
> greets, Günter.
>
>
>
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Michael Felt <ma...@gmail.com>.
Nod - about where APR is going - dev@apr..., "new threads!"
this was about what to use with httpd today. And you answered that, if I
understood correctly - package both httpd 2.2.X and httpd 2.4.X with
apr-1.4.6 and apr-util-1.4.1 - because these "exist" officially.
Many thanks!
On Wed, Sep 19, 2012 at 10:48 PM, Guenter Knauf <fu...@apache.org> wrote:
> Hi Michael,
> Am 19.09.2012 20:51, schrieb Michael Felt:
>
> I have downloading an apr-1.5.X via SVN.
>>
> then you have the STATUS file which lists the details I post below inline
> ...
>
>
> They are working on a release of apr-util-1.5.1. I may not have looked
>> correctly, but I do not see a release of apr-1.5.0.
>>
> yes, 1.5.0 was only tagged but not released - we moved forward due to some
> probs ...
>
>
> I have built against these versions with no issues I have noticed for
>> httpd (make check for apr-util-1.5.1 is not perfect) - however, as a
>> packager I would "prefer" to be packaging against/with known release
>> numbers.
>>
> then you have to wait until the APR folks either release 1.5.1, or ditch
> it and again move on to 1.5.2 ...
>
>
> I shall package the current apr-1.5.0, but just call it "beta", and
>> apr-util once it is released.
>>
> no; then you would pack a version which was never released! The recent
> offical version is 1.4.1, and this will stay until we release something
> newer ...
>
> see here for the current official releases:
> http://apr.apache.org/
>
> please direct further discussion about APR/APU/API to the apr devel list
> ;-)
>
> greets, Günter.
>
>
>
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Guenter Knauf <fu...@apache.org>.
Hi Michael,
Am 19.09.2012 20:51, schrieb Michael Felt:
> I have downloading an apr-1.5.X via SVN.
then you have the STATUS file which lists the details I post below
inline ...
> They are working on a release of apr-util-1.5.1. I may not have looked
> correctly, but I do not see a release of apr-1.5.0.
yes, 1.5.0 was only tagged but not released - we moved forward due to
some probs ...
> I have built against these versions with no issues I have noticed for
> httpd (make check for apr-util-1.5.1 is not perfect) - however, as a
> packager I would "prefer" to be packaging against/with known release
> numbers.
then you have to wait until the APR folks either release 1.5.1, or ditch
it and again move on to 1.5.2 ...
> I shall package the current apr-1.5.0, but just call it "beta", and
> apr-util once it is released.
no; then you would pack a version which was never released! The recent
offical version is 1.4.1, and this will stay until we release something
newer ...
see here for the current official releases:
http://apr.apache.org/
please direct further discussion about APR/APU/API to the apr devel list ;-)
greets, Günter.
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Michael Felt <ma...@gmail.com>.
I have downloading an apr-1.5.X via SVN.
They are working on a release of apr-util-1.5.1. I may not have looked
correctly, but I do not see a release of apr-1.5.0.
I have built against these versions with no issues I have noticed for httpd
(make check for apr-util-1.5.1 is not perfect) - however, as a packager I
would "prefer" to be packaging against/with known release numbers.
I shall package the current apr-1.5.0, but just call it "beta", and
apr-util once it is released.
On Wed, Sep 19, 2012 at 9:48 AM, Plüm, Rüdiger, Vodafone Group <
ruediger.pluem@vodafone.com> wrote:
> Done (r1387473, r1387474, r1387477).
> I did one small change by pointing trunk to apr-util 1.5.x instead of apr
> trunk as this message
> is handling the case where apr < 2.0 is used and hence apr-util is not
> part of it.
>
> Regards
>
> Rüdiger
>
> > -----Original Message-----
> > From: Jim Jagielski [mailto:jim@jaguNET.com]
> > Sent: Dienstag, 18. September 2012 15:27
> > To: dev@httpd.apache.org
> > Subject: Re: which apr-util is really "desired" for the 2.2.X branch
> >
> > And here... +1
> >
> > On Sep 18, 2012, at 9:06 AM, Joe Orton <jo...@redhat.com> wrote:
> >
> > > On Sat, Sep 15, 2012 at 11:57:21AM +0200, Ruediger Pluem wrote:
> > >> I think this message is outdated and should be fixed. For 2.4.x and
> > trunk its even worse because it points to the no
> > >> longer existing apr-util/trunk.
> > >> Anyone opposed if I clean this up in the following way:
> > >>
> > >> 2.2.x: branches/1.4.x
> > >> 2.4.x: branches/1.5.x
> > >> trunk: trunk of APR
> > >
> > > +1 here
> > >
>
>
RE: which apr-util is really "desired" for the 2.2.X branch
Posted by Plüm,
Rüdiger,
Vodafone Group <ru...@vodafone.com>.
Done (r1387473, r1387474, r1387477).
I did one small change by pointing trunk to apr-util 1.5.x instead of apr trunk as this message
is handling the case where apr < 2.0 is used and hence apr-util is not part of it.
Regards
Rüdiger
> -----Original Message-----
> From: Jim Jagielski [mailto:jim@jaguNET.com]
> Sent: Dienstag, 18. September 2012 15:27
> To: dev@httpd.apache.org
> Subject: Re: which apr-util is really "desired" for the 2.2.X branch
>
> And here... +1
>
> On Sep 18, 2012, at 9:06 AM, Joe Orton <jo...@redhat.com> wrote:
>
> > On Sat, Sep 15, 2012 at 11:57:21AM +0200, Ruediger Pluem wrote:
> >> I think this message is outdated and should be fixed. For 2.4.x and
> trunk its even worse because it points to the no
> >> longer existing apr-util/trunk.
> >> Anyone opposed if I clean this up in the following way:
> >>
> >> 2.2.x: branches/1.4.x
> >> 2.4.x: branches/1.5.x
> >> trunk: trunk of APR
> >
> > +1 here
> >
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Jim Jagielski <ji...@jaguNET.com>.
And here... +1
On Sep 18, 2012, at 9:06 AM, Joe Orton <jo...@redhat.com> wrote:
> On Sat, Sep 15, 2012 at 11:57:21AM +0200, Ruediger Pluem wrote:
>> I think this message is outdated and should be fixed. For 2.4.x and trunk its even worse because it points to the no
>> longer existing apr-util/trunk.
>> Anyone opposed if I clean this up in the following way:
>>
>> 2.2.x: branches/1.4.x
>> 2.4.x: branches/1.5.x
>> trunk: trunk of APR
>
> +1 here
>
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Joe Orton <jo...@redhat.com>.
On Sat, Sep 15, 2012 at 11:57:21AM +0200, Ruediger Pluem wrote:
> I think this message is outdated and should be fixed. For 2.4.x and trunk its even worse because it points to the no
> longer existing apr-util/trunk.
> Anyone opposed if I clean this up in the following way:
>
> 2.2.x: branches/1.4.x
> 2.4.x: branches/1.5.x
> trunk: trunk of APR
+1 here
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Michael Felt <ma...@gmail.com>.
Many thanks: i do not "vote", so i'll just say: thumbs up!
On Sat, Sep 15, 2012 at 12:22 PM, Igor Galić <i....@brainsware.org> wrote:
> +1
>
> ----- Original Message -----
> >
> >
> > Michael Felt wrote:
> > > Hi. I downloaded the new 2.2.X branch and ran buildconf. It
> > > suggested I get apr and apr-util using svn and I was a bit
> > > surprised when it suggested .../branches/1.3.x for apr-util
> > >
> > > Are there compatibility issues I am not aware of as I had always
> > > been using the 1.4.x apr-util before.
> > >
> > > Just checking. Thanks.
> >
> > I think this message is outdated and should be fixed. For 2.4.x and
> > trunk its even worse because it points to the no
> > longer existing apr-util/trunk.
> > Anyone opposed if I clean this up in the following way:
> >
> > 2.2.x: branches/1.4.x
> > 2.4.x: branches/1.5.x
> > trunk: trunk of APR
> >
> > Regards
> >
> > Rüdiger
> >
>
> --
> Igor Galić
>
> Tel: +43 (0) 664 886 22 883
> Mail: i.galic@brainsware.org
> URL: http://brainsware.org/
> GPG: 6880 4155 74BD FD7C B515 2EA5 4B1D 9E08 A097 C9AE
>
>
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Igor Galić <i....@brainsware.org>.
+1
----- Original Message -----
>
>
> Michael Felt wrote:
> > Hi. I downloaded the new 2.2.X branch and ran buildconf. It
> > suggested I get apr and apr-util using svn and I was a bit
> > surprised when it suggested .../branches/1.3.x for apr-util
> >
> > Are there compatibility issues I am not aware of as I had always
> > been using the 1.4.x apr-util before.
> >
> > Just checking. Thanks.
>
> I think this message is outdated and should be fixed. For 2.4.x and
> trunk its even worse because it points to the no
> longer existing apr-util/trunk.
> Anyone opposed if I clean this up in the following way:
>
> 2.2.x: branches/1.4.x
> 2.4.x: branches/1.5.x
> trunk: trunk of APR
>
> Regards
>
> Rüdiger
>
--
Igor Galić
Tel: +43 (0) 664 886 22 883
Mail: i.galic@brainsware.org
URL: http://brainsware.org/
GPG: 6880 4155 74BD FD7C B515 2EA5 4B1D 9E08 A097 C9AE
Re: which apr-util is really "desired" for the 2.2.X branch
Posted by Ruediger Pluem <rp...@apache.org>.
Michael Felt wrote:
> Hi. I downloaded the new 2.2.X branch and ran buildconf. It suggested I get apr and apr-util using svn and I was a bit
> surprised when it suggested .../branches/1.3.x for apr-util
>
> Are there compatibility issues I am not aware of as I had always been using the 1.4.x apr-util before.
>
> Just checking. Thanks.
I think this message is outdated and should be fixed. For 2.4.x and trunk its even worse because it points to the no
longer existing apr-util/trunk.
Anyone opposed if I clean this up in the following way:
2.2.x: branches/1.4.x
2.4.x: branches/1.5.x
trunk: trunk of APR
Regards
Rüdiger