You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@allura.apache.org by je...@apache.org on 2015/05/30 14:39:09 UTC
[06/14] allura git commit: [#7806] ticket:773 Inherit docker-dev.ini
from development.ini
[#7806] ticket:773 Inherit docker-dev.ini from development.ini
Project: http://git-wip-us.apache.org/repos/asf/allura/repo
Commit: http://git-wip-us.apache.org/repos/asf/allura/commit/a4ca40a3
Tree: http://git-wip-us.apache.org/repos/asf/allura/tree/a4ca40a3
Diff: http://git-wip-us.apache.org/repos/asf/allura/diff/a4ca40a3
Branch: refs/heads/ib/7806
Commit: a4ca40a36c6dbd7eec72753cfe32da9da8ceb35f
Parents: 826c566
Author: Igor Bondarenko <je...@gmail.com>
Authored: Thu May 21 17:37:22 2015 +0300
Committer: Igor Bondarenko <je...@gmail.com>
Committed: Sat May 30 11:17:16 2015 +0300
----------------------------------------------------------------------
Allura/docker-dev.ini | 457 +--------------------------------------------
1 file changed, 1 insertion(+), 456 deletions(-)
----------------------------------------------------------------------
http://git-wip-us.apache.org/repos/asf/allura/blob/a4ca40a3/Allura/docker-dev.ini
----------------------------------------------------------------------
diff --git a/Allura/docker-dev.ini b/Allura/docker-dev.ini
index 0343dd3..37378a1 100644
--- a/Allura/docker-dev.ini
+++ b/Allura/docker-dev.ini
@@ -15,484 +15,29 @@
; specific language governing permissions and limitations
; under the License.
-
-;
-; Allura configuration
-;
-; Default config values are shown in this file.
-; Commented-out configurations are examples that you can use if you want.
-;
-; Logging configuration is at the end of the file (starting at [loggers])
-;
-; There are many settings you should change for your site (name, domain, secret keys, etc)
-; More settings should be changed for good performance in a production site (no autoreload, no debugging, etc)
-;
-; You may copy this file to make a new configuration file (e.g. production.ini)
-; Or inherit from this file by starting your .ini file like this:
-; [app:main]
-; use = config:development.ini#main
-; Then just use the new file name instead of development.ini for any paster commands you run.
-
-
-[DEFAULT]
-; this section is for a few settings that are shared with error handling middleware
-
-; WARNING: *THE LINE BELOW MUST BE CHANGED ON A PRODUCTION ENVIRONMENT*
-; Debug mode will enable the interactive debugging tool, allowing ANYONE to
-; execute malicious code after an exception is raised.
-debug = true
-; If you want to receive an email for every unhandled HTTP 500 error, set your email address here:
-;email_to = you@yourdomain.com
-error_email_from = paste@localhost
-
-; SMTP settings for outgoing mail
-smtp_tls = false
-smtp_ssl = false
-;smtp_user = some_user
-;smtp_password = some_password
-smtp_timeout = 10
-smtp_server = localhost
-smtp_port = 8826
-; Reply-To and From address often used in email notifications:
-forgemail.return_path = noreply@localhost
-
-
-;
-; Settings for `paster serve` command
-;
[server:main]
use = egg:Paste#http
host = 0.0.0.0
port = 8080
-
-;
-; The main allura settings
-;
[app:main]
-use = egg:Allura
-full_stack = true
-
-; Change this to your website's name
-site_name = Allura
-; Change these to your website's domain
-domain = localhost
-; Change this to your website's full URL
-base_url = http://localhost:8080
-; This should be the same as base_url
-forgemail.url = http://localhost:8080
-
-; Used to uniquify references to static resources, can be a timestamp or any unique value
-; This should be updated each time you deploy (or make significant changes, like new tools, new css)
-build_key=1276635823
-
-; Used by Turbogears / Pylons in some cases. Not particularly relevant for Allura.
-cache_dir = %(here)s/data
-
-; Cache Neighborhood objects for N seconds (speeds up requests).
-; Set to 0 to disable (the default).
-;neighborhood.cache.duration = 0
-
-; Template cache settings
-; See http://jinja.pocoo.org/docs/api/#jinja2.Environment
-jinja_cache_size = -1
-;jinja_bytecode_cache_type = filesystem
-;jinja_bytecode_cache_type = memcached
-;memcached_host =
-
-; Docs at http://beaker.readthedocs.org/en/latest/configuration.html#session-options
-; and http://beaker.readthedocs.org/en/latest/modules/session.html#beaker.session.CookieSession
-beaker.session.key = allura
-beaker.session.type = cookie
-beaker.session.httponly = true
-; set this to true if you use HTTPS. If you use force_ssl.logged_in, this will be set automatically when logged in and not when not.
-beaker.session.secure = false
-; CHANGE THIS VALUE FOR YOUR SITE
-beaker.session.validate_key = 714bfe3612c42390726f
-
-; Google Analytics account for tracking
-;ga.account = UA-XXXXX-X
-
-; Project registration system. Only local is available, unless you write a custom one for custom integration.
-registration.method = local
-theme = allura
-
-; For LDAP see https://forge-allura.apache.org/docs/getting_started/installation.html#using-ldap
-;auth.method = ldap
-auth.method = local
-auth.remember_for = 365 ; in days, for the "remember me" checkbox on login
-
-; Customize login/logout URLs only if you have some custom authentication set up.
-auth.login_url = /auth/
-auth.logout_url = /auth/logout
-; the login fragement URL shows just the form, not a whole page. It is used within a login overlay on some pages
-auth.login_fragment_url = /auth/login_fragment/
-auth.post_logout_url = /
-
-auth.min_password_len = 6
-auth.max_password_len = 30
-
-; password expiration options (disabled if neither is set)
-;auth.pwdexpire.days = 1
-;auth.pwdexpire.before = 1401949912 ; unix timestamp
-
-; if using LDAP, also run `pip install python-ldap` in your Allura environment
-
-auth.ldap.server = ldaps://localhost/
-auth.ldap.suffix = ou=people,dc=localdomain
-auth.ldap.admin_dn = cn=admin,dc=localdomain
-auth.ldap.admin_password = secret
-auth.ldap.schroot_name = scm
-auth.ldap.use_schroot = false
-auth.ldap.password.algorithm = 6
-auth.ldap.password.rounds = 6000
-auth.ldap.password.salt_len = 16
-; "autoregister" allows users to log in to Allura with an existing LDAP account
-; If using ldap, with autoregister, you should also set "allow_user_registration"
-; to false below.
-; Set "autoregister" to false to require user to register in Allura to create
-; the LDAP record and Allura record for the user.
-auth.ldap.autoregister = true
-
-auth.allow_user_registration = true
-auth.allow_user_to_disable_account = true
-auth.allow_edit_prefs = true
-auth.allow_password_change = true
-auth.allow_upload_ssh_key = false
-auth.allow_user_messages_config = true
-auth.allow_birth_date = true
-auth.allow_non_primary_email_password_reset = true
-auth.require_email_addr = true
-; List of social network options to use on user account settings
-socialnetworks = Facebook, Linkedin, Twitter, Google+
-
-; In seconds
-auth.recovery_hash_expiry_period = 600
-
-user_prefs_storage.method = local
-; user_prefs_storage.method = ldap
-; If using ldap, you can specify which fields to use for a preference.
-; Any fields not specified here will be stored locally in mongo
-user_prefs_storage.ldap.fields.display_name = cn
-
-; Limit the number of emails a user can claim.
-user_prefs.maximum_claimed_emails = 20
-
-; Control the order of sections on the user profile page
-;user_profile_sections.order = activity, personal-data, skills
-
-; Site admins will be the same as the admins of this project:
-site_admin_project = allura
-site_admin_project_nbhd = Projects
-
-; Spam filtering service: mollom or akismet
-;spam.method = akismet
-; for akismet:
-;spam.key =
-; for mollom:
-;spam.public_key =
-;spam.private_key =
-
-; Webhook timeout in seconds
-webhook.timeout = 30
-; List of pauses between retries, if hook fails (in seconds)
-webhook.retry = 60 120 240
-; Limit rate of webhook firing (in seconds, default = 30)
-; Option format: webhook.<hook type>.limit,
-; all '-' in hook type must be changed to '_'
-; e.g. for repo-push webhook:
-webhook.repo_push.limit = 30
-; Limit max number of hooks that can be created for given project/app
-; Option name format: same as above.
-; Value format: json dict, where keys are app names (as appears in
-; `WebhookSender.triggered_by`) and values are actual limits (default=3), e.g.:
-webhook.repo_push.max_hooks = {"git": 3, "hg": 3, "svn": 3}
-
-; Additional fields for admin project/user search
-; Note: whitespace after comma is important!
-;search.project.additional_search_fields = private, url, title
-;search.user.additional_search_fields = email_addresses
-
-; Additional fields to show in the result of admin project/user search
-; Note: whitespace after comma is important!
-;search.project.additional_display_fields = private, url, title
-;search.user.additional_display_fields = email_addresses
-
-; To make all pages use ssl: (also set beaker.session.secure above)
-;force_ssl.pattern = .
-; To use ssl if and only if a user is logged in:
-;force_ssl.logged_in = true
-; If you set force_ssl.logged_in, you probably want some URLs to be ssl when logged out:
-;force_ssl.pattern = ^/auth|^/[a-z0-9-]+/import_project/ ; import_project uses a login overlay
-; And to permit some URLs to be accessed over http anyway:
-;no_redirect.pattern = ^/nf/\d+/_(ew|static)_/|^/rest/|^/nf/tool_icon_css|^/auth/refresh_repo
-
-
-; Set the locations of some static resources. ("ew" stands for EasyWidgets library)
-; script_name is the path that is handled by the application
-; url_base is the prefix that references to the static resources should have
-; If you use a CDN, put your CDN prefix in the url_base values
-ew.script_name = /nf/%(build_key)s/_ew_/
-ew.url_base = /nf/%(build_key)s/_ew_/
-static.script_name = /nf/%(build_key)s/_static_/
-static.url_base = /nf/%(build_key)s/_static_/
-
-; Expires header for "static" resources served through allura (e.g. icons, attachments, /nf/tool_icon_css)
-files_expires_header_secs = 1209600 ; 2 weeks
-
-ew.extra_headers = [ ('Access-Control-Allow-Origin', '*') ]
-
-; If your environment (e.g. behind a server-side proxy) needs to look at an http header to get the actual remote addr
-;ip_address_header = X-Forwarded-For
-
-; SCM settings for local development
-scm.host.ro.git = /srv/git$path
-scm.host.rw.git = /srv/git$path
-; remote access varies by configuration. If you are using a vagrant VM, this should work:
-;scm.host.rw.git = ssh://vagrant@localhost:2222/srv/git$path
-scm.host.ro.hg = /srv/hg$path
-scm.host.rw.hg = /srv/hg$path
-scm.host.ro.svn = file:///srv/svn$path/
-scm.host.rw.svn = file:///srv/svn$path/
-
-; SCM settings for chroot + ldap configuration. See Allura/docs/getting_started/scm_host.rst
-;scm.host.ro.git = git://git.localhost$path
-;scm.host.rw.git = ssh://$username@localhost:8022/scm-repo$path
-;scm.host.ro.hg = http://hg.localhost$path
-;scm.host.rw.hg = ssh://$username@localhost:8022/scm-repo$path
-;scm.host.ro.svn = http://svn.localhost$path/
-;scm.host.rw.svn = svn+ssh://localhost:8022/scm-repo$path/
-
-; SCM settings for https (sorry no docs for setting these up)
-; these settings are currently required by the template, no matter what
-scm.host.https.git = https://$username@localhost:8022/scm-repo$path
-scm.host.https_anon.git = https://localhost:8022/scm-repo$path
-scm.host.https.hg = https://$username@localhost:8022/scm-repo$path
-scm.host.https_anon.hg = https://localhost:8022/scm-repo$path
-scm.host.https.svn = https://localhost:8022/scm-repo$path/
-scm.host.https_anon.svn = https://localhost:8022/scm-repo$path/
-
-scm.clone.git = git clone $source_url $dest_path
-scm.clone.hg = hg clone $source_url $dest_path
-scm.clone.ro.svn = svn checkout $source_url $dest_path
-scm.clone.https_anon.svn = svn checkout $source_url $dest_path
-scm.clone.svn = svn checkout --username=$username $source_url $dest_path
+use = config:development.ini#main
-scm.repos.root = /srv
-scm.repos.tarball.enable = false
-scm.repos.tarball.root = /usr/share/nginx/www/
-scm.repos.tarball.url_prefix = http://localhost/
-scm.repos.tarball.zip_binary = /usr/bin/zip
-
-; SCM imports (currently just SVN) will retry if it fails
-; You can control the number of tries and delay between tries here:
-scm.import.retry_count = 50
-scm.import.retry_sleep_secs = 5
-
-; One-click merge is enabled by default, but can be turned off on for each type of repo
-scm.merge.git.disabled = false
-scm.merge.hg.disabled = false
-
-
-; bulk_export_enabled = true
-; If you keep bulk_export_enabled, you should set up your server to securely share bulk_export_path with users somehow
-bulk_export_path = /tmp/bulk_export/{nbhd}/{project}
-bulk_export_filename = {project}-backup-{date:%Y-%m-%d-%H%M%S}.zip
-; You will need to specify site-specific instructions here for accessing the exported files.
-bulk_export_download_instructions = Sample instructions for {project}
-
-importer_upload_path = /tmp/importer_upload/{nbhd}/{project}
-
-; To disable any plugin, tool, importer, etc from being available, you can use the disable_entry_points config option.
-; Specify the keys and values as they are declared in the tool's "setup.py" file.
-; Examples:
-;disable_entry_points.importers = google-code-tracker, google-code-repo
-;disable_entry_points.allura.project_importers = google-code
-
-; Importers specifically, can be left enabled but not linked to. You have to know the URL to use it. Example:
-;hidden_importers = trac-tickets
-
-; GitHub importer keys. For github ticket import, it is best to set
-; up an app at https://github.com/settings/applications Use the root URL
-; of your Allura instance for both URLs, and enter client values here:
-;github_importer.client_id =
-;github_importer.client_secret =
-
-; If your site has docs about specific importers, you can add them here and
-; they'll appear on the import forms
-;doc.url.importers.Google Code = http://...
-
-; List of oauth API keys permitted to use special forum import API
-; (should be converted to newer importer system)
-;oauth.can_import_forum = api-key-1234, fa832r0fdsafd, f23f80sdf32fd
-
-
-; space-separated list of tool names that are valid options
-; for project admins to set for their 'support_page' field
-; this field is not used by default in Allura, so this option
-; is disabled by default
-;support_tool_choices = wiki tickets discussion
-
-; Control how /categories URL can be accessed to edit trove categories (used in project categories and user skills)
-; Default: everyone
-trovecategories.enableediting = true
-; Nobody:
-;trovecategories.enableediting = false
-; Site admins only:
-;trovecategories.enableediting = admin
-
-; ActivityStream
activitystream.master = mongodb://mongo:27017
-activitystream.database = activitystream
-activitystream.activity_collection = activities
-activitystream.node_collection = nodes
-activitystream.timeline_collection = timelines
-activitystream.enabled = true
-activitystream.recording.enabled = true
-; Ming setup
-; These don't necessarily have to be separate databases, they could
-; be all in the same database if desired
ming.main.uri = mongodb://mongo:27017/allura
-ming.main.auto_ensure_indexes = False
ming.project.uri = mongodb://mongo:27017/project-data
-ming.project.auto_ensure_indexes = False
ming.task.uri = mongodb://mongo:27017/task
-ming.task.auto_ensure_indexes = False
-;ming.zarkov.uri = mongodb://127.0.0.1:27017/zarkov
-;ming.zarkov.auto_ensure_indexes = False
-
-; Zarkov host setting, requires the zarkov and gevent libraries.
-;zarkov.host = tcp://127.0.0.1:9000
-
-; A float from 0-1 representing a % of requests to measure timing on.
-; Sampled requests will have timing logged to stats.log (can change file in [handler_timermiddleware] logging section)
-stats.sample_rate = 1
-
-; Taskd setup
-; number of seconds to sleep between checking for new tasks
-monq.poll_interval=2
-
-; SOLR setup
-solr.server = http://localhost:8983/solr
-; Alternate server to use just for querying
-;solr.query_server =
-; Shorter timeout for search queries (longer timeout for saving to solr)
-solr.short_timeout = 10
-; commit on every add/delete?
-solr.commit = false
-; commit add operations within N ms
-solr.commitWithin = 10000
-; Use improved data types for labels and custom fields?
-; New Allura deployments should leave this set to true. Existing deployments
-; should set to false until existing data has been reindexed. Reindexing will
-; convert existing label and custom field data to more appropriate solr types.
-solr.use_new_types = true
-
-; Incoming email settings. Used when you run: paster smtp_server development.ini
-; address to listen to
-forgemail.host = 0.0.0.0
-forgemail.port = 8825
-; domain suffix for your mail, change this. You also need to route *.*.*.forgemail.domain to the above host/port via
-; your mail and DNS configuration
-forgemail.domain = .in.localhost
-
-; Specify the number of projects allowed to be created by a user
-; depending on the age of their user account.
-; Keys are number of seconds, values are max number of projects allowed
-; (including the default user-project, so you probably want to add 1)
-; This example allows for 1 project if the account is less than an hour old
-; and 5 projects if the account is less than a day old. No limits after that
-;project.rate_limits = {"3600": 2, "86400": 6}
-
-; set this to "false" if you are deploying to production and want performance improvements
-auto_reload_templates = true
-
-; How frequently users can send messages, in seconds
-user_message.time_interval = 3600
-; Max number of messages that can be sent within that time interval.
-user_message.max_messages = 20
-
-; Default number of times to show a sitewide notification
-; See https://forge-allura.apache.org/docs/getting_started/administration.html#site-notifications
-site_notification.impressions = 0
-
-; When rendering discussion post Markdown to html, if the render takes longer
-; than `markdown_cache_threshold` (in seconds), the resulting html will be
-; cached and served from cache on subsequent requests. Set to 0 to cache all
-; posts. Remove entirely to cache nothing.
-markdown_cache_threshold = .1
-; markdown text longer than max length will not be converted to html
-markdown_render_max_length = 999999999
-; Don't add rel=nofollow to these domains when generating links from Markdown content
-;nofollow_exempt_domains =
-
-; Export control choices on the project admin overview page.
-show_export_control = false
-
-; By default project admins can soft-delete their projects.
-; A soft-deleted project will still be in the database and visible to admins, but not to others.
-allow_project_delete = true
-allow_project_undelete = true
-; Advanced settings for controlling "Last Commit Doc" algorithm used when visiting any repo browse page
-lcd_thread_chunk_size = 10
-lcd_timeout = 60
-
-;
-; Settings for the Blog tool
-;
-; Enable or disable external RSS feed importing in ForgeBlog tool.
-; Default is "false". This feature requires GPL library "html2text". Install it with following command:
-; pip install -e git://github.com/brondsem/html2text.git#egg=html2text
-; You will also need to run `paster pull-rss-feeds development.ini` in a cron job to fetch them.
-forgeblog.exfeed = false
-
-;
-; Settings for the Chat tool
-;
-forgechat.host = irc.freenode.net
-forgechat.port = 6667
-ircbot.nick = allurabot
-
-;
-; Settings for ShortUrl tool
-;
-; Override this if you set up an additional shortening mechanism (e.g. custom short domain)
-short_url.url_pattern = {base_url}/{nbhd}/{project}/{mount_point}/{short_name}
-
-
-;
-; Settings for UserStats tool
-;
-userstats.count_lines_of_code = true
-
-
-;
-; Optional settings for profiling with https://pypi.python.org/pypi/keas.profile
-;
[filter-app:profile]
use=egg:keas.profile#profiler
next=main
-
-;
-; setup for the taskd background daemon request controller
-;
[app:task]
use = main
override_root = task ; TurboGears will use controllers/task.py as root controller
-
-
-;
-; Logging configuration
-;
-; Add additional loggers, handlers, formatters here
-; Uses python's logging config file format
-; https://docs.python.org/2/library/logging.config.html#configuration-file-format
-;
[loggers]
keys = root, allura, sqlalchemy, paste, pylons, taskdstatus, timermiddleware, tmw_details