You are viewing a plain text version of this content. The canonical link for it is here.
Posted to embperl@perl.apache.org by Bryan Thale <br...@motorola.com> on 2003/05/16 21:31:52 UTC
EmbPerl-2.0.b8 make test fails on escape.htm line 191
I'm trying to build EmbPerl 2.0b8 on a RH 9.0 system running Perl 5.8.0,
Apache 2.0.40, & mod_perl 1.99_07-5. make test fails during the testing
of offline mode at #35 escape.htm
>#35 escape.htm...
>Error in Line 191
>Is: ><a href="0?$where=interface.router_id=router.id&!Table=interface,router"><
>Should: ><a href="0?!Table=interface,router&$where=interface.router_id=router.id"><
>
> ERRORS detected! NOT all test have been passed successfully
>
I'm painfuly aware of the RH 9.0 Perl 5.8.0 unicode problem and have set
LANG=C in my environment which has allowed me to install the various
modules mentioned on the Embperl Install page, (URI, HTML::Parser,
etc.). I've attached the tail end of the test.log file that seems to
encompass the line with the error in the hope that it might mean
something to someone. There is no mention of escape.htm in the
test.err.log file. Is there anywhere else I can look for clues as to
what is wrong?
Thanks,
Bryan.
--
Bryan Thale
Networks & Infrastructure Research, Motorola Labs
mailto:bryan.thale@motorola.com
Embperl-2.0b8/test/tmp/test.log:
>[6753]toString: Node=751(598) RepeatLevel=4 type=4 flags=1 text=>
>print OUT:
>
><= (#329) SVs=26304
>[6753]toString: Node=750(750) RepeatLevel=4 type=35 flags=0 text=>7: ��ric
><= (#375) SVs=26304
>[6753]toString: Node=754(754) RepeatLevel=4 type=4 flags=4 text=>0: ��ric
><= (#376) SVs=26304
>[6753]toString: Node=755(755) RepeatLevel=4 type=35 flags=0 text=>7: ��ric
><= (#375) SVs=26304
>[6753]toString: Node=756(756) RepeatLevel=4 type=4 flags=4 text=>0: ��ric
><= (#376) SVs=26304
>[6753]toString: Node=757(757) RepeatLevel=4 type=35 flags=0 text=>7: ��ric
><= (#375) SVs=26304
>[6753]toString: Node=758(758) RepeatLevel=4 type=4 flags=4 text=>0: ��ric
><= (#376) SVs=26304
>[6753]toString: Node=759(759) RepeatLevel=4 type=35 flags=0 text=>7: ��ric
><= (#375) SVs=26304
>[6753]toString: Node=760(760) RepeatLevel=4 type=4 flags=4 text=>0: ��ric
><= (#376) SVs=26304
>[6753]toString: Node=752(623) RepeatLevel=4 type=1 flags=1 text=>a<= (#38) SVs=26304
>[6753]toString: Node=625(625) RepeatLevel=4 type=34 flags=1 text=>0?<= (#341) SVs=26304
>[6753]toString: Node=761(626) RepeatLevel=4 type=4 flags=1 text=><= (#1) SVs=26304
>[6753]toString: Node=762(762) RepeatLevel=4 type=4 flags=1 text=>$where<= (#377) SVs=26304
>[6753]toString: Node=763(763) RepeatLevel=4 type=4 flags=1 text=>=<= (#13) SVs=26304
>[6753]toString: Node=764(764) RepeatLevel=4 type=4 flags=1 text=>interface.router_id=router.id<= (#378) SVs=26304
>[6753]toString: Node=765(765) RepeatLevel=4 type=4 flags=1 text=>&<= (#356) SVs=26304
>[6753]toString: Node=766(766) RepeatLevel=4 type=4 flags=1 text=>!Table<= (#379) SVs=26304
>[6753]toString: Node=767(767) RepeatLevel=4 type=4 flags=1 text=>=<= (#13) SVs=26304
>[6753]toString: Node=768(768) RepeatLevel=4 type=4 flags=1 text=>interface,router<= (#380) SVs=26304
>[6753]toString: Node=628(628) RepeatLevel=4 type=34 flags=1 text=><= (#1) SVs=26304
>[6753]toString: Node=629(629) RepeatLevel=4 type=4 flags=1 text=>
>
><= (#143) SVs=26304
>[6753]toString: Node=633(633) RepeatLevel=4 type=1 flags=1 text=>a<= (#38) SVs=26304
>[6753]toString: Node=635(635) RepeatLevel=4 type=34 flags=1 text=>7?<= (#344) SVs=26304
>[6753]toString: Node=769(636) RepeatLevel=4 type=4 flags=1 text=><= (#1) SVs=26304
>[6753]toString: Node=770(770) RepeatLevel=4 type=35 flags=3 text=>$where<= (#377) SVs=26304
>[6753]toString: Node=771(771) RepeatLevel=4 type=4 flags=1 text=>=<= (#13) SVs=26304
>[6753]toString: Node=772(772) RepeatLevel=4 type=35 flags=3 text=>interface.router_id=router.id<= (#378) SVs=26304
>[6753]toString: Node=773(773) RepeatLevel=4 type=4 flags=1 text=>&<= (#356) SVs=26304
>[6753]toString: Node=774(774) RepeatLevel=4 type=35 flags=3 text=>!Table<= (#379) SVs=26304
>[6753]toString: Node=775(775) RepeatLevel=4 type=4 flags=1 text=>=<= (#13) SVs=26304
>[6753]toString: Node=776(776) RepeatLevel=4 type=35 flags=3 text=>interface,router<= (#380) SVs=26304
>[6753]toString: Node=638(638) RepeatLevel=4 type=34 flags=1 text=><= (#1) SVs=26304
>[6753]toString: Node=639(639) RepeatLevel=4 type=4 flags=1 text=>
>
>
><= (#345) SVs=26304
>[6753]toString: Node=645(645) RepeatLevel=4 type=4 flags=1 text=><P>Ok.<P>
>
>
></body>
></html>
><= (#135) SVs=26304
>[6753]toString: Node=646(646) RepeatLevel=4 type=4 flags=1 text=><= (#1) SVs=26304
>[6753]CACHE: Free content for *file:/usr/src/Embperl-2.0b8/test/html/escape.htm*epparse:Embperl*epcompile:*eprun:
>[6753]Delete: DomTree = 9 SVs=26304
>[6753]CACHE: Free content for *file:/usr/src/Embperl-2.0b8/test/html/escape.htm*epparse:Embperl
>[6753]CACHE: Free content for *file:/usr/src/Embperl-2.0b8/test/html/escape.htm
>[6753]PERF: input = ???
>[6753]PERF: Time: 170 ms
>[6753]Request finished. Fri May 16 14:01:39 2003
>. Entry-SVs: 25181 Exit-SVs: 26301
>[6753]CUP: $b = (this is the value in $a) ����������???<&+
>[6753]CUP: $text = This is a text ? & + - %21
>[6753]CUP: $find_if = HASH(0x8440970)
>[6753]CUP: $a = (this is the value in $a)
>[6753]CUP: $cc = ���������������������������������
>[6753]CUP: $id = abcdefghijklmnopqrstuvwxyz
>[6753]CUP: %H = ...
>[6753]CUP: @H = ...
>[6753]CUP: $r = Embperl::Req=HASH(0x821de14) Object of Embperl::Req
>[6753]CUP: $dat = ARRAY(0x844097c)
>[6753]CUP: %A = ...
>[6753]CUP: @A = ...
>[6753]CUP: $n = My Name �����
>[6753]PERF: DOMSTAT: MemUsage = 133780 Bytes numNodes = 917 numLevelLookup = 0 numLevelLookupItem = 0 numStr = 347 numReplace = 403
---------------------------------------------------------------------
To unsubscribe, e-mail: embperl-unsubscribe@perl.apache.org
For additional commands, e-mail: embperl-help@perl.apache.org
Re: EmbPerl-2.0.b8 make test fails on escape.htm line 191
Posted by Bryan Thale <br...@motorola.com>.
OK, downloaded the latest snapshot available
http://cvs.apache.org/snapshots/embperl/embperl_20030516165141.tar.gz
and built it after correcting 'action_module' to 'actions_module'.
make test is now happy until it gets to #12 errors.htm in the mod_perl
testing section.
>Starting httpd...
>pid = 8083 ok
>
>Testing mod_perl mode...
>
>#0 ascii... ok
>#1 pure.htm... ok
>#2 nooutput.htm... ok
>#3 nooutput.htm... ok
>#4 plain.htm... ok
>#5 plain.htm... ok
>#6 plain.htm... ok
>#7 plainblock.htm... ok
>#8 plainblock.htm... ok
>#12 error.htm...
>
>Expected 4 more error(s) in logfile
>
>Input: test/html/error.htm
>Output: test/tmp/out.htm
>Log: test/tmp/test.log
>Testparameter:
> errors = 5
> version = 2
> repeat = 3
>
> ERRORS detected! NOT all test have been passed successfully
>
Entire test/tmp/html.err.log:
>[Fri May 16 16:54:08 2003] [warn] [8083]ERR: 32: Warning in Perl code: Unquoted string "qqqqqqqqqqqqqq" may clash with future reserved word at /usr/src/embperl/test/html/error.htm line 23.
>[Fri May 16 16:54:08 2003] [warn] [8083]ERR: 32: Warning in Perl code: Bareword found where operator expected at /usr/src/embperl/test/html/error.htm line 46, near "$error is"
>[Fri May 16 16:54:08 2003] [warn] [8083]ERR: 32: Warning in Perl code: !(Missing operator before is?)
>[Fri May 16 16:54:08 2003] [error] [8083]ERR: 24: Error in Perl code: syntax error at /usr/src/embperl/test/html/error.htm line 23, at EOF!syntax error at /usr/src/embperl/test/html/error.htm line 32, near "+ )"!syntax error at /usr/src/embperl/test/html/error.htm line 46, near "$error is here "!syntax error at /usr/src/embperl/test/html/error.htm line 59, near ";!!}"
>
>
I didn't find any particular instructions about building from cvs in the
list archives other than mentioning the need to run the xsbuilder
scripts and patch the makefiles to add an 's' to 'action_module'. Was
there something more?
Thanks,
Bryan.
--
Bryan Thale
Networks & Infrastructure Research, Motorola Labs
mailto:bryan.thale@motorola.com
Aaron Johnson wrote:
>2.0.b8 does not work correctly under 5.8 Perl
>You will need to get the latest stable version from CVS.
>
>Please see:
>http://cvs.apache.org/snapshots/embperl/
>
>You can download snapshots there.
>
>Please review the archives for this list on more information pertaining
>to the issue with 5.8 and how to build from CVS.
>
>Aaron
---------------------------------------------------------------------
To unsubscribe, e-mail: embperl-unsubscribe@perl.apache.org
For additional commands, e-mail: embperl-help@perl.apache.org
Re: EmbPerl-2.0.b8 make test fails on escape.htm line 191
Posted by Aaron Johnson <so...@gina.net>.
On Fri, 2003-05-16 at 15:31, Bryan Thale wrote:
> I'm trying to build EmbPerl 2.0b8 on a RH 9.0 system running Perl 5.8.0,
> Apache 2.0.40, & mod_perl 1.99_07-5. make test fails during the testing
> of offline mode at #35 escape.htm
>
> >#35 escape.htm...
> >Error in Line 191
> >Is: ><a href="0?$where=interface.router_id=router.id&!Table=interface,router"><
> >Should: ><a href="0?!Table=interface,router&$where=interface.router_id=router.id"><
> >
> > ERRORS detected! NOT all test have been passed successfully
> >
>
> I'm painfuly aware of the RH 9.0 Perl 5.8.0 unicode problem and have set
> LANG=C in my environment which has allowed me to install the various
> modules mentioned on the Embperl Install page, (URI, HTML::Parser,
> etc.). I've attached the tail end of the test.log file that seems to
> encompass the line with the error in the hope that it might mean
> something to someone. There is no mention of escape.htm in the
> test.err.log file. Is there anywhere else I can look for clues as to
> what is wrong?
>
2.0.b8 does not work correctly under 5.8 Perl
You will need to get the latest stable version from CVS.
Please see:
http://cvs.apache.org/snapshots/embperl/
You can download snapshots there.
Please review the archives for this list on more information pertaining
to the issue with 5.8 and how to build from CVS.
Aaron
> Thanks,
> Bryan.
---------------------------------------------------------------------
To unsubscribe, e-mail: embperl-unsubscribe@perl.apache.org
For additional commands, e-mail: embperl-help@perl.apache.org